Additional fixation using a metal plate with bioresorbable screws and wires for robinson type 2B clavicle fracture.

Simple clavicle fractures can achieve satisfactory results through conservative treatment, and the less frequency of nonunion. Non-union or malunion can occur in displaced clavicle fractures or comminuted shaft fractures. Treatment of displaced comminuted clavicle shaft fractures is performed by holding together the free fragments with interfragmentary screws or wires and fixing them to the clavicle with a plate. Therefore, we performed interfragmentary fixation using open reduction and internal fixation with bioresorbable screws (Mg-Ca alloy, Resomet bioresorbable bone screw; U&I Corp.) and bioresorbable wires (Mg-Ca alloy, Resomet bioresorbable K-wire and pin, U&I Corp.) for displaced comminuted clavicle fractures (Robinson type 2B) and additionally used a metal plate. We expected decreased irritation and infection due to absorption after surgery. We report four cases that were treated in this way.

Biomechanical analysis of four augmented fixations of plate osteosynthesis for comminuted mid-shaft clavicle fracture: A finite element approach.

Sufficient stabilization of comminuted mid-shaft clavicle fractures via plate fixation is difficult to achieve. Various augmentations, including interfragmentary screws and cerclage wiring, have been adopted to reinforce fixation stability. The present study aimed to assess the biomechanical stability of augmented plate fixations using the finite element method. First, a clavicle fracture model was created from CT data. Fixation was then induced using a locking compressive plate (LCP) with the following four augmentations: i) Double inner cerclage wirings (DICW), ii) double outer cerclage wirings (DOCW), iii) a single interfragmentary screw (SIS) and iv) double interfragmentary screws (DIS). Compressive and bending forces of 100 N were subsequently applied at the acromial region of the clavicle. The stress distribution, displacement and fracture micro-motions of the model were assessed and compared. The DOCW resulted in the highest stress exerted on the LCP, followed by SIS, DICW and DIS. For the clavicle fracture, DICW, DOCW and SIS resulted in high stress levels. However, DIS fixation alone resulted in levels of stress that were below the yield strength of cortical bone. Displacement analysis revealed that DOCW fixation resulted in the greatest degree of displacement and fracture micro-motions, followed by SIS, DICW and DIS. The results indicated that SIS, DIS and DOCW may be used as augmentations of LCP fixation for comminuted mid-shaft clavicle fractures. However, DIS was the recommended augmentation due to it exerting the lowest stress and the highest stability compared with the other fixations. The DICW may be used to aid fracture reduction and plate placement in surgery but should be avoided for permanent fixation.

The impact of lag screw in the healing time of distal tibia fractures treated with minimally invasive plate osteosynthesis: A randomized clinical trial.

BACKGROUND: In recent years, Minimally Invasive Plate Osteosynthesis (MIPO) has been gaining popularity in the treatment of distal tibia fractures, because it is a minimally invasive surgical procedure, thus it limits the soft-tissues damage. This prospective randomized study aims to assess the impact of lag screw in the healing time of distal tibia fractures treated with MIPO technique, in a six-month follow-up. METHODS: Patients between 20 and 70 years of age with distal tibial fracture, type 43-A according to AO/OTA classification system were included. All the patients were randomized into two groups, to receive MIPO without lag screw (Group-A) or MIPO with percutaneous lag screw (Group-B). Patients were followed clinically and radiographically at 3, 6, 12 and 24 weeks postoperatively. The main outcome measure was the time needed to achieve the painless full weight-bearing (FWB) after surgery. Unpaired t-test after ANOVA (analysis of variance) was performed to assess AOFAS score differences between the 2 groups at each follow-up. Pearson correlation test also was performed. The tests were two-tailed with a confidence level of 5%. RESULTS: 42 patients (24 male and 18 female, mean age 49.54 years old, range 25-80) were recruited. A significant shorter mean time until painless FWB (p = 0.016) was observed in Group-B (11.22 ± 3.06 weeks) compared with Group-A (13.48 ± 2.42 weeks) (Table 2). The mean AOFAS score was comparable in patients treated with (Group-B) and without lag screw (Group-A) at all follow-ups. CONCLUSIONS: This prospective randomized clinical study has shown that the use of lag screw in distal tibia fractures treated with MIPO technique speeds the fracture healing, thus shortening the time needed to achieve FWB.

An Alternate Technique of Applying Lag Screw for Fixation of Distal Fibula Fracture: Posterior to Anterior Interfragmentary Compression Screw.

Ankle fractures are one of the most common lower limb fractures, representing a significant portion of the trauma workload. Marked proportion of these is isolated intraarticular lateral malleolus fractures. Anatomical reduction and rigid internal fixation using lag screw (interfragmentary screw) to provide interfragmentary compression has remained the choice of treatment in selected lateral malleolus fractures. Applying interfragmentary compression screw from anterior to the posterior surface of the fibula has been the traditional method of performing this. In this article, we describe an alternate method of applying posterior-anterior interfragmentary compression screw to the fibula fractures. We will also discuss the benefits it provides such as minimizing the chances of hardware-related peroneal tendon irritation. Further argument will focus on the mechanical benefit this will render while providing equal clinical outcome of the time tested anterior-posterior interfragmentary compression screw. LEVELS OF EVIDENCE: Level V: Therapeutic comparison.

Combined Innovative Portal Arthroscopy and Fluoroscopy-Assisted Reduction and Fixation in Subtle Injury of the Lisfranc Joint Complex: Analysis of 10 Cases.

Subtle injuries of the Lisfranc joint complex are uncommon and difficult to diagnose clinically and thus are easily missed even by experienced orthopedic doctors. Misdiagnosed injuries can lead to chronic disability until eventual fusion surgery. We describe 10 cases diagnosed with subtle injury of the Lisfranc joint that were treated with combined innovative portal arthroscopy and fluoroscopy-assisted reduction and percutaneous screw fixation in an interfragmentary fashion. The distance between the first and second metatarsals (the Lisfranc distance) and that between the medial cuneiform and fifth metatarsal base (foot arch height) was measured before and after surgery. The American Orthopaedic Foot and Ankle Society function score was evaluated perioperatively. The average preoperative and postoperative Lisfranc distance was 4.38 ± 0.39 mm and 2.68 ± 0.9 mm, the foot arch height was 12.63 ± 2.75 mm and 21.80 ± 3.50 mm, and the American Orthopaedic Foot and Ankle Society score was 59.1 ± 5.69 and 86.8 ± 10.1, respectively. Of the 10 patients, 3 had excellent outcomes, 6 had good outcomes, and 1 had a fair outcome. In conclusion, we report a useful and minimally invasive surgery for acute, subacute, and even chronic subtle injury of the Lisfranc joint. The Lisfranc distance, foot arch height, and function of the foot were restored clinically, and all measurements showed statistically significant differences.

Clinical Outcomes of Combinations of Locking Compression Plate Fixation through Minimally Invasive Precutaneous Plate Osteosynthesis and Interfragmentary Screw Fixation in Distal Tibia Fracture / 대한족부족관절학회지

PURPOSE: To analyze the outcome of distal tibia fracture treated with the Distal Tibia LCP with combination of interfragmentary screw. MATERIALS AND METHODS: Between January 2008 and March 2012, data of 34 patients with fracture of distal tibia treated with the Distal Tibia LCP with or without combination of interfragmentary screws were reviewed. There were 17 males and 17 females with an average age of 51.8 years (range, 18~77 years). Radiographic union time and time from surgery until ability to full weight bearing were measured and compared. Callus index was measured as quotient of callus thickness and diameter of corticalis both in AP and sagittal direction. RESULTS: 12 fractures were treated with interfragmentary screws and 22 fractures were treated with bridging plate alone. In interfragmentary fixation group, time to full weight bearing was 14 weeks versus 15.75 weeks without screw. Callus index at bearing was not significantly lesser in patients with screw compated with those without, but callus index difference at posterative 4weeks was sigficant. Radiologic union time was 11.3 weeks in interfragmentary fixation group and 12.58 weeks without screw. CONCLUSION: The osteosynthesis with the Distal tibia LCP with combination of interfragmentary screw seems to be more stable in postoperative 4weeks than Distal tibia LCP alone, expecting to earlier ROM exercise and rehabilitation.