Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 20 de 96
Filter
1.
Diagnostics (Basel) ; 14(11)2024 May 27.
Article in English | MEDLINE | ID: mdl-38893638

ABSTRACT

The treatment for humeral shaft fractures (HSFs) is still controversial, consisting of a wide variety of orthopedic osteosynthesis materials that imply different grades of invasiveness. The aim of this study is to investigate the correlation between inflammatory blood-derived markers and the magnitude of the surgical procedure in young and middle-aged patients who sustained these fractures. Observational, retrospective research was conducted between January 2018 and December 2023. It followed patients diagnosed with recent HFSs (AO/OTA 12-A and B) and followed operative treatment. They were split in two groups, depending on the surgical protocol: group A, operated by closed reduction and internal fixation (CRIF) with intramedullary nails (IMNs), and group B, operated by open reduction and internal fixation (ORIF) with dynamic compression plates (DCPs). Statistically significant differences (p < 0.05) between the two groups could be observed in injury on the basis of surgery durations, surgical times, pre- and postoperative neutrophil-per-lymphocyte ratio (NLR), postoperative platelet-per-lymphocyte ratio (PLR), monocyte-per-lymphocyte ratio (MLR), systemic inflammatory index (SII), systemic inflammatory response index (SIRI) and aggregate inflammatory systemic index (AISI). The multivariate regression model proposed revealed that NLR > 7.99 (p = 0.007), AISI > 1668.58 (p = 0.008), and the surgical times (p < 0.0001) are strongly correlated to the magnitude of the surgical protocol followed. Using receiver operating characteristic (ROC) curve analysis, a balanced reliability was determined for both postoperative NLR > 7.99 (sensitivity 75.0% and specificity 75.6) and AISI > 1668.58 (sensitivity 70.6% and specificity 82.2%). Postoperative NLR and AISI as inflammatory markers are highly associated with the magnitude of surgical trauma sustained during humeral shaft fracture osteosynthesis in a younger population.

2.
Article in English | MEDLINE | ID: mdl-38780791

ABSTRACT

PURPOSE: We aim to compare interfragmentary compression with the position osteosynthesis in the fixation of different femoral neck fractures (FN) in synthetic bones subjected to vertical load. METHODS: Forty-two synthetic femurs were subjected to neck fractures and separated into 3 groups according to the Pauwels classification: Pauwels I had 6 units (PI); Pauwels II, 24 units, with and without comminution (PII); and Pauwels III, 12 units, with and without comminution (PIII). After, they were fixed with 2 different ways: three 7, 0 mm cannulated lag screws (CSs) versus three 6, 5 mm solid fully threaded screws (SSs). Screws positioning was oriented by the Pauwels classification: inverted triangle or crossed screws. All specimens were submitted to vertical loading until failure. RESULTS: The average force was 79.4 ± 22.6 Kgf. The greatest one was recorded in model 1 (135.6 Kgf), and the lowest in model 41 (39.6 Kgf). CSs and SSs had similar resistance until failure (p = 0.2). PI showed heightened resistance and PIII showed a worse response (p < 0,01). CSs had better performance in PIII (p = 0.048). Comminution and screws orientation caused no difference on peak force (p = 0.918 and p = 0.340, respectively). CONCLUSIONS: In synthetic bones, the resistance of a femoral neck fracture osteosynthesis using a 7, 0 mm cannulated lag screw or 6, 5 mm solid fully threaded screw are similar. There was no loss of efficiency with comminution in the femoral neck. Osteosynthesis resistance decreased with the verticalization of the fracture line and, in the more vertical ones, interfragmentary compression with CSs was more resistant than positional osteosynthesis with SSs.

3.
Arch Bone Jt Surg ; 11(11): 690-695, 2023.
Article in English | MEDLINE | ID: mdl-38058971

ABSTRACT

Objectives: Major surgical approaches for volar plating of the distal radius include the standard flexor carpi radialis (FCR) approach, the extended FCR (eFCR) approach, and the extended FCR approach combined with radial-sided carpal tunnel release (eFCR+CTR). The purpose of this study was to determine which of these three surgical approaches offers the greatest exposure and visualization of the distal radius. Methods: Sequential dissections were performed on each of 30 fresh frozen below elbow cadaveric samples in order to simulate the three surgical approaches for distal radius volar plating, starting with the standard FCR approach, advancing to eFCR, and finishing with eFCR+CTR. Prior to the initial dissection of each cadaveric sample, radiographs were taken in order to calculate the total area of the distal radius. Then, following each sequential dissection, photographs were taken of each specimen and analyzed with an image measuring software in order to obtain the area of distal radius exposed. The percentage of total distal radius exposure was then calculated for each of the three surgical approaches. Results: The eFCR+CTR approach offered the greatest average distal radius exposure at 87% of total distal radius visualized. The eFCR approach provided the next greatest exposure with an average of 73% visualized, followed by the standard FCR approach with an average of 61% visualized. Conclusion: The extended FCR approach with radial-sided carpal tunnel release is both safe and efficacious for osteosynthesis of distal radius fractures in the setting of concomitant carpal tunnel syndrome. This study demonstrates that an additional advantage of this approach includes improved surgical exposure and visualization of the distal radius. This surgical approach is a valuable addition to any upper extremity surgeon's armamentarium and should be considered when treating difficult distal radius fractures.

4.
Hip Pelvis ; 35(4): 259-267, 2023 Dec.
Article in English | MEDLINE | ID: mdl-38125270

ABSTRACT

Purpose: Nondisplaced femoral neck fractures have traditionally been treated with in situ fixation. However, poor surgical and clinical outcomes have been reported for fractures with valgus deformity >15°, and the reduction of valgus impaction has recently been emphasized. In addition, early degenerative osteoarthritis can be caused by cam-type femoroacetabular impingement after healing of femoral neck fractures. This study was designed with the objective of confirming the difference in progression of radiographic osteoarthritis according to the severity of the valgus deformity. Materials and Methods: Patients who underwent internal fixation using multiple cannulateld screws for management of nondisplaced femoral neck fractures were divided into two groups: high valgus group (postoperative valgus angle ≥15°) and low valgus group (postoperative valgus angle <15°). Evaluation of demographic data and changes in the joint space width from the immediate postoperative period to the latest follow-up was performed. Results: A significant decrease in joint space width in both hip joints was observed in the high valgus group when compared with the low valgus group, including cases with an initial valgus angle less than 15° and those corrected to less than 15° of valgus by reduction. No complications requiring surgical treatment were observed in either group; however, two cases of avascular necrosis, one in each group, which developed in the low valgus group after reduction of the fracture, were followed for observation. Conclusion: Performing in situ fixation in cases involving a valgus deformity ≥15° in non-displaced femoral neck fractures may cause accelerated narrowing of the hip joint space.

5.
J Dent ; 137: 104650, 2023 10.
Article in English | MEDLINE | ID: mdl-37544353

ABSTRACT

OBJECTIVES: Surgeons often encounter challenges when treating maxillofacial fractures using conventional methods that involve trimming or bending ready-made titanium plates for open reduction and internal fixation (ORIF) since it can be time-consuming, imprecise, and inconvenient. This retrospective case series aimed to introduce a novel bone reduction method that utilizes virtual planning, patient-specific surgical guides, and titanium plates. METHODS: Seven patients with mandibular symphysis or subcondylar fractures resulting from facial trauma underwent cone-beam computed tomography (CBCT) or facial CT scans, and their medical histories were documented. Virtual surgery was conducted based on three-dimensional (3D) stereolithography images derived from CT scans using the FaceGide software (MegaGen, Daegu, Korea). ORIF was performed using patient-specific surgical guides and plates that were designed, printed, and milled. Radiographic, clinical, and occlusal evaluations were conducted at two weeks and six weeks postoperatively. Subsequently, 3D images from virtual surgery and postoperative CT scans were compared. RESULTS: The comparison of 3D virtual surgery and postoperative images revealed minimal surface differences of less than 1 mm. T-scan evaluations indicated that there were no statistically significant differences between the two- and six-week postoperative assessments. Favorable clinical outcomes were observed. CONCLUSION: This novel method demonstrated stable outcomes in terms of occlusion and healing, with no notable complications. Consequently, this approach may serve as a viable alternative to conventional methods. CLINICAL SIGNIFICANCE: Facial fracture surgery that utilizes patient-specific surgical guides and plates within a digital workflow can facilitate meticulous surgical planning, reducing the risk of complications and minimizing operation time.


Subject(s)
Fracture Fixation, Internal , Fractures, Bone , Humans , Retrospective Studies , Fracture Fixation, Internal/methods , Titanium , Fractures, Bone/surgery , Tomography, X-Ray Computed
6.
Rev. venez. cir. ortop. traumatol ; 55(1): 29-37, jun. 2023. ilus, graf
Article in Spanish | LILACS, LIVECS | ID: biblio-1512029

ABSTRACT

Las fracturas supracondíleas en niños se asocian con algunas complicaciones. Su tratamiento estándar es la reducción cerrada y la fijación con alambres en distintas configuraciones. Se realizó un estudio observacional, analítico, prospectivo y longitudinal con pacientes pediátricos que ingresaron con fracturas supracondíleas de húmero tratados quirúrgicamente con alambres de Kirschner con "Técnica Cruzada" en el Hospital Central San Cristóbal enero a junio de 2022. Se incluyeron 30 pacientes. La edad promedio fue 6,3±2,2(3-10) años. La causa más frecuente del traumatismo fue la precipitación de altura en 63,3% de los casos. La posición del codo al momento del accidente fue en extensión en 90%. Todas las fracturas fueron cerradas. El tiempo promedio desde el accidente hasta su atención en emergencia fue de 8,5±13,4(2-72) horas. Los signos clínicos más frecuentes fueron dolor en 100,0%, limitación funcional en 96,7%, aumento de volumen 73,3% y deformidad 50,0%. Según la clasificación AO la más frecuente fue del tipo 13-M/3. 1 III en el 50% de los casos y según Gartland, las tipo IIIA en 53,3%. A las 4 semanas, 100,0% de las fracturas consolidaron, 13,3% presentó valgo y 6,7% varo en la radiografía anteroposterior. Mientras que, en la lateral, 33,3% antecurvatum. La media del ángulo de Baumann fue de 20,27±1,39 grados. La tasa de complicaciones fue de 16,66%, 2(6,7%) casos presentaron neuropraxia y 3(10,0%) granuloma. En conclusión, la Técnica Cruzada es segura en términos de reducción, funcionalidad y tasas de complicaciones en el seguimiento a medio plazo(AU)


Supracondylar fractures in children are associated with some complications. Its standard treatment is closed reduction and fixation with wires in different configurations. An observational, analytical, prospective and longitudinal study was made, with pediatric patients admitted with supracondylar humeral fractures surgically treated with Kirschner wires with the "Cross Technique" at the Hospital Central San Cristóbal from January to June 2022. 30 patients were included. The mean age was 6,3±2,2(3-10) years. The most frequent cause of trauma was high altitude precipitation in 63,3% of the cases. The position of the elbow at the time of the accident was 90% extended. All fractures were closed. The mean time from the accident to emergency care was 8,5±13,4(2-72) hours. The most frequent clinical signs were pain in 100,0%, functional limitation in 96.7%, volume increase in 73,3%, and deformity in 50,0%. According to the AO classification, the most frequent was type 13-M/3. 1 III in 50% of cases and according to Gartland, type IIIA in 53,3%. At 4 weeks, 100,0% of the patients consolidated, 13,3% presented valgus and 6,7% varus on the anteroposterior radiograph. While, on the side, 33,3% antecurvatum. The mean Baumann angle was 20,27 ± 1.39 degrees. The rate of complications was 16,66%, 2 (6,7%) cases presented neuropraxia and 3 (10,0%) granuloma. In conclusion, the Crossover Technique is safe in terms of reduction, functionality, and complication rates in medium-term follow-up(AU)


Subject(s)
Humans , Male , Female , Child, Preschool , Child , Closed Fracture Reduction , Fractures, Closed , Humeral Fractures, Distal , Pain
7.
Rev. venez. cir. ortop. traumatol ; 55(1): 38-45, jun. 2023. graf
Article in Spanish | LILACS, LIVECS | ID: biblio-1512030

ABSTRACT

El objetivo de este trabajo es determinar la epidemiología de la infección post osteosíntesis a través de cultivos de fluidos sonicados en los pacientes del Hospital Universitario de Caracas en el período comprendido entre noviembre 2021-noviembre 2022. Se realizó un estudio observacional de tipo, serie de casos, a través de la revisión de historias médicas de todos los casos que acudieron con diagnóstico de infección post osteosíntesis a fin de determinar cuál agente causal fue el más común, factores de riesgo asociados y tratamiento de elección. Se incluyeron 10 pacientes, 70% de sexo masculino y edad promedio de 40,6±17,9 años. Los gérmenes aislados en el cultivo convencional fueron el SAMS, SAMR, Enterobacter cloacae, Staphylococcus coagulasa negativo (10,0% cada uno), el 60,0% de los cultivos en esta modalidad fueron negativos, en el cultivo de fluidos por baño de ultrasonido, el germen más frecuente fue el SAMR en el 30% de los casos, seguido del SAMS con 20%, en menor medida un caso de Staphylococcus coagulasa negativo y una infección polimicrobiana compuesta por K. pneumoniae, E. cloacae y Enterococo sp. El tratamiento médico consistió en antibioticoterapia vía endovenosa, se realizó de acuerdo al antibiograma obtenido del cultivo, el más empleado fue la cefazolina en 30% (en casos de SAMS), seguido de la vancomicina + meropenem y la vancomicina aislada en 20%. Todos los pacientes cumplieron tratamiento al menos por 4 semanas con evolución satisfactoria(AU)


The objective of this work is to determine the epidemiology of post-osteosynthesis infection through sonicated fluid cultures in patients at the Hospital Universitario de Caracas in the period between November 2021 and November 2022. An observational study of type, series of cases, through the review of the medical records of all the cases that presented with a diagnosis of post-osteosynthesis infection in order to determine which causative agent was the most common, associated risk factors and treatment of choice. 10 patients were included, 70% male and mean age 40.6 ± 17.9 years. The germs isolated in the conventional culture were SAMS, SAMR, Enterobacter cloacae, coagulase-negative Staphylococcus (10.0% each), 60.0% of the cultures in this modality were negative, in the culture of fluids by bath of On ultrasound, the most frequent germ was MRSA in 30% of cases, followed by SAMS with 20%, to a lesser extent a case of coagulase-negative Staphylococcus and a polymicrobial infection made up of K. pneumoniae, E. cloacae and Enterococcus sp. The medical treatment consisted of intravenous antibiotic therapy, it was carried out according to the antibiogram obtained from the culture, the most used was cefazolin in 30% (in cases of SAMS), followed by vancomycin + meropenem and vancomycin alone in 20%. All patients complied with treatment for at least 4 weeks with satisfactory evolution(AU)


Subject(s)
Humans , Male , Female , Adolescent , Adult , Postoperative Care , Fracture Fixation, Internal , Infections/epidemiology , Enterobacter cloacae
8.
Rev. venez. cir. ortop. traumatol ; 55(1): 66-73, jun. 2023. ilus
Article in Spanish | LILACS, LIVECS | ID: biblio-1513220

ABSTRACT

La fijación interna combinada con artroplastia en pacientes de edad avanzada, está indicada en fracturas acetabulares complejas inveteradas, artrosis preexistente, luxación inveterada, Impactación supero-medial de la cúpula acetabular, la finalidad de la cirugía es lograr la fijación de la columna anterior, columna posterior, lamina cuadrilátera y pared posterior para proporcionar estabilidad adecuada al componente acetabular y restaurar el centro de rotación de la cadera. Debido a la complejidad de estas lesiones, se decide presentar el siguiente caso clínico, que corresponde una paciente femenina de 70 años, quien posterior a traumatismo de baja energía presenta fractura inveterada compleja con patrón en T de Acetábulo de 8 meses de evolución. El Objetivo es: Evaluar los resultados del tratamiento de las fracturas acetabulares complejas en pacientes de edad avanzada con reducción abierta más fijación interna combinada con artroplastia total de cadera. Se realiza en un 1er tiempo: Abordaje Ilioinguinal, ORIF con placa de reconstrucción 3,5 mm para CA, 2do Tiempo: Abordaje de Kocher Langenbeck, ORIF con placa de reconstrucción 3,5 mm para CP y PP. 3er Tiempo: ATC izquierda primaria no cementada, con aporte biológico de injerto óseo autologo. Resultado: Se restableció la integridad de las líneas acetabulares, reducción anatómica según Matta, índice de Harris hip score de 88 puntos. Se concluye que el procedimiento combinado de ORIF mas ATC es el tratamiento ideal de las fracturas acetabulares complejas inveteradas en pacientes de edad avanzada(AU)


Internal fixation combined with arthroplasty in elderly patients is indicated in inveterate complex acetabular fractures, preexisting osteoarthritis, inveterate dislocation, supero medial impaction of the acetabular dome, the purpose of surgery is to achieve fixation of the anterior column (AC), posterior column (PC), quadrilateral plate, and posterior wall (PP) to provide adequate stability to the acetabular component and restore the hip center of rotation. Due to the complexity of these injuries, it is decided to present the following clinical case, which corresponds to a 70-year-old female patient, who, after a low-energy trauma, presents a complex inveterate fracture with a T-pattern of the acetabulum of 8 months of evolution. The Objective is: To evaluate the results of the treatment of complex acetabular fractures in elderly patients with open reduction plus internal fixation (ORIF) combined with total hip arthroplasty (THA). It is performed in a 1st stage: Ilioinguinal approach, ORIF with 3.5 mm reconstruction plate for (CA), 2nd Stage: Kocher Langenbeck approach, ORIF with 3.5 mm reconstruction plate for (CP) and (PP). 3rd Time: Uncemented primary left THA, with biological contribution of autologous bone graft. Result: The integrity of the acetabular lines was restored, anatomical reduction according to Matta, Harris hip score index of 88 points. It is concluded that the combined procedure (ORIF plus ATC) is the ideal treatment of inveterate complex acetabular fractures in elderly patients(AU)


Subject(s)
Humans , Female , Aged , Orthopedic Procedures , Arthroplasty, Replacement, Hip , Fracture Fixation, Internal , Open Fracture Reduction
9.
Rev. venez. cir. ortop. traumatol ; 55(1): 74-80, jun. 2023. ilus, tab
Article in Spanish | LILACS, LIVECS | ID: biblio-1513225

ABSTRACT

Las fracturas triplanares de tibia distal, son fracturas complejas caracterizadas por afectación multiplanar, clasificándose como Salter Harris tipo IV, en el periodo de cierre fisiario. Son poco frecuentes, representando el 5-15% de las fracturas pediátricas. El mecanismo de lesión que ocurre con mayor frecuencia, consiste en supinación y rotación externa. La tomografía computarizada es actualmente el Gold Standard para el diagnóstico de este tipo de fractura, nos permite evaluar todos los planos, siendo la radiografía simple insuficiente para el diagnóstico ya que puede pasar desapercibida. Paciente de 14 años de edad con fractura triplanar en 2 partes de tibia distal, con resolución quirúrgica. Nuestro caso es un ejemplo de una fractura triplanar de tibia distal, la cual es de baja frecuencia, difícil diagnostico e interpretación. Presentamos imágenes preoperatorias, intraoperatorias y postoperatorias del manejo de esta lesión, obteniendo resultados satisfactorios clínicos, funcionales y en estudios de imágenes. Es indispensable lograr una reducción anatómica de la superficie articular para lograr una evolución satisfactoria. Se recomienda una tomografía computarizada para diagnosticar y manejar esta lesión de manera adecuada. El seguimiento postoperatorio es crucial para el manejo de este paciente, ya que se espera una discrepancia en la longitud de las extremidades y/o deformidad(AU)


Triplane fractures of the distal tibia are complex fractures characterized by multiplane effects. They are classified in the Salter-Harris system as type IV in the period of physeal closure. These fractures are rare and represent 5-15% of pediatric fractures. The most common mechanism of injury is supination and external rotation. Computed tomography is currently the Gold Standard for the diagnosis of this type of fracture since it allows us to evaluate all planes, while plain radiography is insufficient because the fracture can go unnoticed. The objective is to report the clinical case of a 14-year-old patient with triplanar fracture in 2 parts of the distal tibia with surgical resolution. This case is an example of a triplanar fracture of the distal tibia, which is of low frequency, and difficult to diagnose and interpret. Preoperative, intraoperative and postoperative images of the management of this lesion are presented, obtaining satisfactory clinical, functional and imaging study results. It is essential to achieve an anatomical reduction of the joint surface to achieve a satisfactory evolution. A CT scan is recommended to properly diagnose and manage this injury. Postoperative follow-up is crucial for the management of this patient, as a limb length discrepancy and/or deformity is expected(AU)


Subject(s)
Humans , Male , Adolescent , Rotation , Tibial Fractures/surgery , Supination
10.
Oper Orthop Traumatol ; 35(2): 110-120, 2023 Apr.
Article in German | MEDLINE | ID: mdl-36928712

ABSTRACT

OBJECTIVE: The pararectus approach was rediscovered several years ago for pelvic surgery and described as an alternative approach especially for the treatment of acetabular fractures of the anterior column involving the quadrilateral plate. INDICATIONS: For optimal visualization of acetabular fractures involving the quadrilateral plate, fractures of the anterior wall and anterior column, anterior column/posterior hemitransverse fractures, and fractures with central impression of dome fragments, the pararectus approach has proven to be a useful access. CONTRAINDICATIONS: The pararectus approach is not used for posterior column fractures, posterior wall fractures, combined posterior wall and posterior column fractures, transverse fractures with displaced posterior column or in combination with posterior wall fractures, and T­fractures with displaced posterior column or in combination with posterior wall fractures. SURGICAL TECHNIQUE: The entire pelvic ring, including the quadrilateral plate, can be accessed via the pararectus approach. The choice of the correct surgical window depends on the fracture location and the requirements of fracture reduction. POSTOPERATIVE MANAGEMENT: In general, partial weight-bearing should be maintained for 6 weeks, although earlier weight-bearing release may be possible if necessary, depending on fracture pattern and osteosynthesis. Particularly in geriatric patients, partial weight-bearing is often not possible, so that early and often relatively uncontrolled full weight-bearing has to be accepted. RESULTS: In a comparative gait analysis between patients following surgical stabilization of an isolated unilateral acetabular fracture through the pararectus approach and healthy subjects, sufficient stability and motion function of the pelvis and hip during walking was already evident in the early postoperative phase.


Subject(s)
Fractures, Bone , Spinal Fractures , Humans , Aged , Acetabulum/injuries , Treatment Outcome , Fractures, Bone/surgery , Fracture Fixation, Internal/methods
11.
Orthop Surg ; 15(8): 1959-1966, 2023 Aug.
Article in English | MEDLINE | ID: mdl-36274213

ABSTRACT

OBJECTIVE: In complicated Neer three- and four-part proximal humerus fracture (PHF), greater tuberosity (GT) fragments are often comminuted, and the currently widely used locking plate may not fix GT fragments effectively. A further understanding of morphological characteristics of the GT fragments may help explore new fixation devices. This study aimed to determine the fracture line morphology of the GT fragment of Neer three- or four-part PHF and analyze the location relationship between the locking plate and the GT fragment. METHODS: Seventy-one three-dimensional computed tomography scans of Neer three- and four-part PHF were retrospectively reviewed between January 2014 and June 2019. Fracture fragments were reconstructed and virtually reduced in the Mimics software, and fracture lines of GT fragments were depicted on a humerus template in the 3-matic software and then were superimposed altogether. The common sites of the GT fracture were identified, and the location relationship between the locking plate and GT fragments was analyzed in a computer-simulated scenario. RESULTS: The fracture line morphology of GT fragments was similar between Neer three- and four-part PHF. The overall morphology of GT fragments was in a fan shape, which could be summarized as anterior, superior, posterior, and middle lines. Of these, we identified 51 split and 29 avulsion type GT fragments based on the Mutch classification, and they could occur simultaneously in a PHF. The overall morphology of split type fragments was in a fan shape, and avulsion type fragments showed a quite distinguishable distribution pattern. A GT fragment could be classified as anterior-split, posterior-split, complete-split, anterior -avulsion, and posterior-avulsion type based on its morphology and location. The median percentage of fragment area covered by the plate was 32.3% in all of the fragments, and it was 69.4%, 23.0%, 37.2%, 21.8%, 0.0% in anterior-split, posterior-split, complete-split, anterior-avulsion, and posterior-avulsion type GT fragments. We defined the posterior-split, anterior-avulsion, and posterior-avulsion type GT fragments as the risky GT fragments, and they occurred in 43 (60.6%) Neer three- and four-part PHFs. CONCLUSION: The fracture line morphology of GT fragments of Neer three- and four-part PHF was in a fan shape. GT fragments could be classified based on their location and morphology. The extent of GT fragment coverage provided by the locking plate differed in various fragment types, and we identified the anterior-avulsion, posterior-avulsion, and posterior-split type fragments as the risky GT fragments with a high incidence rate in Neer three- and four-part PHFs.


Subject(s)
Humeral Fractures , Shoulder Fractures , Humans , Retrospective Studies , Fracture Fixation, Internal/methods , Shoulder Fractures/diagnostic imaging , Shoulder Fractures/surgery , Tomography, X-Ray Computed , Humerus , Bone Plates
12.
Acta Clin Croat ; 62(1): 162-174, 2023 Apr.
Article in English | MEDLINE | ID: mdl-38304355

ABSTRACT

Complex both-column acetabulum fractures are severe injuries, often with associated injuries and complications with uncertain clinical and functional outcome. Modern traumatological protocols point to early surgical treatment, with anatomical reduction and stable internal fixation of fragments as a prerequisite for achieving a good treatment outcome. This retrospective-prospective multicenter cohort study was conducted during the 2014-2020 period and included 24 cases that met the input parameters, using the Letournel and Judet classification, and application of a combined surgical approach, a modified Stoppa and Kocher-Langenbeck approach. The results of treatment with complications, associated injuries and functional outcome are described. Fractures were caused by high kinetic energy trauma, and the cause was traffic accident in 17/24 (70.84%), fall from a height in 5/24 (20.83%) and crash injuries in 2/24 (8.33%) cases. The sample included 18 (75.00%) male and 6 (25.00%) female, with 10/24 (41.67%) right sided and 14/24 (58.33%) left sided fractures. Their mean age was 45.06 (range, 24-62) years. The mean follow-up time was 2.8 (range, 1-5) years. Postoperative complications were detected in 14/24 (58.33%) cases, including wound infection in 4/24 (16.67%), deep vein thrombosis in 2/24 (8.33%), heterotopic ossification in 2/24 (8.33%), hip osteoarthrosis in 3/24 (12.50%), avascular necrosis of femoral head in 2/24 (8.33%), total hip arthroplasty procedures in 3/24 (12.50%), abdominal complications in 2/24 (8.33%), urologic complications in 2/24 (8.33%), iatrogenic nerve lesion in 3/24 (12.50%), and fatal pulmonary embolism in 2/24 (8.33%) cases; there was no loss of reduction or non-union acetabular fracture. Associated injuries that we recorded as major trauma were presented in 13/24 (54.17%) study patients. The final functional results according to the Harris Hip Score (HHS) were excellent in 7/22 (31.82%), good in 10/22 (45.45%), moderate in 4/22 (18.18%) patients, and poor in 1/22 (4.55%) patient. The mean HHS was 84 (range 34-98). Complications and results have led us to a conclusion that primary injuries significantly affect the clinical and functional results. A good diagnostic procedure, assessment of the general condition and application of the trauma scoring system, surgical treatment that includes early hip reduction, open reduction internal fixation and physical rehabilitation are necessary.


Subject(s)
Fractures, Bone , Hip Fractures , Neck Injuries , Spinal Fractures , Female , Humans , Male , Middle Aged , Cohort Studies , Fracture Fixation, Internal/methods , Fractures, Bone/surgery , Hip Fractures/surgery , Prospective Studies , Retrospective Studies , Treatment Outcome , Young Adult , Adult
13.
Rev. venez. cir. ortop. traumatol ; 54(2): 62-70, dic. 2022. graf, ilus
Article in Spanish | LILACS, LIVECS | ID: biblio-1516094

ABSTRACT

Las Fracturas Acetabulares bilaterales tienen una incidencia extremadamente baja. El objetivo es evaluar los resultados funcionales, radiológicos y las complicaciones en el tratamiento quirúrgico de las fracturas acetabulares bilaterales. Este estudio se basa en datos de 722 Fracturas de Acetábulo tratadas por el autor principal durante 15 años desde enero de 2005 a septiembre de 2020. Se realizó un estudio descriptivo y retrospectivo. Se incluyeron 13 casos correspondientes al 1,8% del universo. El 72,7% de las fracturas se presentaron por accidentes de tránsito, el 69,3% corresponden a fracturas de patrón asociado en relación con el 30,7% de fracturas de patrón simple. En el 56,5% se realizó abordaje de Kocher Langenbeck. La reducción anatómica se logró en el 92,30%, en el 7,69% la reducción no fue satisfactoria. Para la evaluación funcional se utilizó el HHS, 88,46% reportaron buenos resultados y 11,53% insatisfactorios. Respecto a las complicaciones, 7,69% presentaron osteoartrosis Tönnis II y 7,69% neuroapraxia del nervio ciático izquierdo. Se encontró supervivencia del 100%. El tiempo ideal para la resolución quirúrgica es antes de las 3 semanas. Los resultados radiológicos y funcionales están directamente relacionados al tiempo de fijación, es importante tomar en cuenta que debido a la magnitud de la energía del impacto que se transmite por ambos acetábulos los patrones de fractura que coexisten entre ambas superficies articulares son diferentes, por lo que optimizar la planificación preoperatoria es fundamental(AU)


Bilateral Acetabular Fractures have an extremely low incidence. The objective is to evaluate the functional and radiological results and the complications in the surgical treatment of bilateral Acetabular Fractures. This study is based on a data of 722 acetabulum fractures cases treated by the lead author for over 15 years from january 2005 to september 2020. A descriptive, retrospective study was made. 13 cases corresponding to 1,8% of the universe were included. 72,7% of the fractures occurred due to traffic accidents, 69,3% correspond to associated pattern fractures in relation to 30,7% of simple pattern fractures. In 56,5% the Kocher Langenbeck approach was performed. The anatomical reduction was achieved in 92,30%, in 7,69% the reduction was not satisfactory. The functional result was evaluated according to the HHS, obtaining good results in 88,46% of the cases and unsatisfactory results in 11,53%. Regarding complications, we found 7,69% with Tönnis II osteoarthrosis, 7,69% with neuropraxia of the left sciatic nerve. Successful results with 100% survival were found. The ideal time for surgical resolution is before 3 weeks. The radiological and functional results are directly related to the fixation time. It is important to take into account that due to the magnitude of the impact energy that is transmitted by both acetabulums, the fracture patterns that coexist between both articular surfaces are different, so optimizing preoperative planning is essential(AU)


Subject(s)
Humans , Male , Female , Adolescent , Adult , Middle Aged , Fractures, Bone/surgery , Accidents, Traffic , Orthopedic Procedures , Open Fracture Reduction , Fracture Fixation, Internal
14.
BMC Surg ; 22(1): 387, 2022 Nov 11.
Article in English | MEDLINE | ID: mdl-36368981

ABSTRACT

OBJECTIVE: A micromotion-based balanced drilling system was designed based on a locking plate (LP) and far cortical locking (FCL) concept to maintain the balance of micromotions of the cortex on both sides of a fracture region. The system was tested by axial compression test. METHODS: The fracture gap was set to 2 cm, and locking screws with a diameter of 5 mm and a locking plate were used to fix it. The diameters of the two sections of the stepping drill were 3.5 mm and 5.0 mm, respectively. One of the matching drilling sleeves was a standard sleeve (eccentricity, 0 mm) and the other was an eccentric sleeve (proximal eccentricity, 1 mm). A model of the fixed locking plate (AO/ASIF 33-A3) for distal femoral fractures with a gap of 2 cm was established based on data from 42 artificial femurs (SAWBONE). According to the shape of the screw holes on the cortex, the fixed fracture models were divided into a control group (standard screw hole group X126, six cases) and an experimental group (elliptical screw hole group N, 36 cases). The experimental group was further divided into six subgroups with six cases in each (N126, N136, N1256, N1356, N12356, N123456), based on the number and distribution of the screws on the proximal fracture segment. The control, N126, and N136 groups were subjected to an axial load of 500 N, and the other groups were subjected to an axial load of 1000 N. The displacements of the kinetic head, far cortex, and near cortex were measured. The integral structural stiffness of the model and the near cortical strain were calculated. The data of each group were analyzed by using a paired t-test. RESULTS: When the far cortical strains were 2%, 5%, and 10%, the near cortical strains in group N126 were 0.96%, 2.35%, and 4.62%, respectively, significantly higher than those in the control group (X126) (p < 0.05). For a different distribution of the screws, when the far cortical strains were 2%, 5%, and 10%, the near cortical strains in group N126 were significantly higher than those in group N136 (p < 0.05). However, there was no significant difference between the near cortical strains in the two groups with four screws (p > 0.05). For different numbers of screws, the near cortical strains in the three-screw groups were significantly higher than those in the four-screw groups (p < 0.05), and there was no significant difference in near cortical strains among the four-, five-, and six-screw groups (p > 0.05). CONCLUSION: The proposed drill and matching sleeves enabled a conventional locking compression plate to be transformed into an internal fixation system to improve the balanced motion of the near and far cortices. Thus, strain on a fracture site could be controlled by adjusting the diameter of the drill and the eccentricity of the sleeve.


Subject(s)
Bone Plates , Bone Screws , Humans , Biomechanical Phenomena , Fracture Fixation, Internal , Technology
15.
J Clin Med ; 11(21)2022 Oct 26.
Article in English | MEDLINE | ID: mdl-36362527

ABSTRACT

This study aimed to determine the incidence of maxillary sinus pathology in patients with a midfacial fracture who underwent osteosynthesis surgery and evaluate the associated risk factors. We conducted a retrospective case-control analysis of patients with midfacial fractures involving a maxillary sinus wall who were treated with open reduction and internal fixation (ORIF) between January 2015 and December 2020. Fracture reduction, the number of screws implanted in the maxillary sinus, and the number of screws penetrating the maxillary sinus, etc., were examined as potential risk factors. Maxillary sinus pathology on postoperative CT was considered the primary outcome for case-control analysis. Binary logistic regression was used to identify variables associated with postoperative maxillary sinus pathology. Thereafter, propensity score matching (PSM) was used to extract confounding factors. A total of 262 patients (totaling 372 maxillary sinuses) were included for analysis. PSM yielded 178, 246, and 70 matched sinuses, respectively, depending on the potential risk factors. Postoperative maxillary sinus pathology was visualized in 218 of the 372 maxillary sinuses (58.60%). The risk factors for postoperative maxillary sinus pathology included the number of screws penetrating the maxillary sinus (odds ratio (OR), 1.124; p = 0.007), an imperfect maxillary sinus wall fracture reduction (OR, 2.901; p = 0.021), and the number of sinus walls involved (OR, 1.383; p = 0.011). After PSM, postoperative maxillary sinus pathology was still more prevalent in sinuses with multiple maxillary sinus wall fractures (64.04% vs. 48.31%, p = 0.034), sinuses with more screws penetrating the maxillary sinus (64.23% vs. 50.41%, p = 0.028), and sinuses with an imperfect reduction (80% vs. 51.43%, p = 0.012). In conclusion, maxillary sinus pathology is common after the ORIF of midfacial fractures. Patients with a fracture of multiple maxillary sinus walls require a close follow-up. Screw penetration of the maxillary sinus should be avoided to prevent maxillary sinus pathology after a midfacial fracture ORIF.

16.
Arch Bone Jt Surg ; 10(8): 661-667, 2022 Aug.
Article in English | MEDLINE | ID: mdl-36258745

ABSTRACT

Background: The two techniques most utilized in the surgical treatment of humeral shaft fractures are open reduction internal fixation (ORIF) and intramedullary nailing (IMN). Although there have been multiple comparative clinical studies comparing outcomes for these two treatments, studies have not suggested one approach to be superior to the other. The purpose of this study is to perform a systematic literature review and meta-analysis of studies that evaluated the treatment of humeral shaft fractures with either ORIF or intramedullary nail. Methods: We conducted this meta-analysis utilizing stricter inclusion and broader exclusion criteria to examine these two common approaches. We examined those articles which have compared first-time, closed fractures of the humeral diaphysis in adults in fracture patterns that could be treated equivalently by intramedullary nail or plate fixation. The primary outcome of interest was nonunion, and studies that did not report nonunion rates were excluded. Results: There were a total of 1,926 abstracts reviewed and a total of three articles were included in the final analysis after screening. There was no significant difference in the incidence of nonunion between plating (2/111, 1.8%) and nailing (4/104, 3.9%) (P>0.05). The mean difference in average time to union for plated fractures and nailed fractures was 1.11 weeks (95% CI 0.82 to 1.40) which was statistically significant (P<0.05). There was a significant difference in the incidence of radial nerve palsy (12/111, 10.8%) for plating compared to nailing (0/104, 0%) (P=0.0004). There was no difference in incidence of post-operative infection between the two groups intramedullary nailing (P>0.05). Conclusion: The results of this analysis demonstrate an increased risk of iatrogenic radial nerve injury, and a significantly shorter time to union when treating humeral shaft fractures with plating as compared to intramedullary nailing. There was no difference in the rates of nonunion or delayed union. Based on the evidence, both plating and nailing can achieve a similar treatment effect on humeral shaft fractures.

17.
Strategies Trauma Limb Reconstr ; 17(2): 105-116, 2022.
Article in English | MEDLINE | ID: mdl-35990176

ABSTRACT

Aim: This article aims to compare the outcomes between open reduction and internal fixation (ORIF) and external fixation (ExFix) in tibial plateau fractures. Background: Open reduction and internal fixation and external fixation are common methods for managing tibial plateau fractures without a consensus of choice. Materials and methods: PubMed, Cochrane Library, Ovid, CINAHL®, Scopus, and Embase were searched. Clinical studies in humans comparing ExFix and ORIF for tibial plateau fractures were included. Case reports, pathological, and biomechanical studies were excluded. Two investigators reviewed the studies independently, and any discrepancies were resolved. The quality and heterogeneity of each study were assessed in addition to calculating the odds ratio (OR) of the surgical outcomes and complications at a 95% confidence interval, with p <0.05 as statistical significance. Results: Of the 14 included studies, one was a randomised trial, one was a prospective study, and 12 were retrospective studies. The 865 fractures identified across the studies constituted 458 (52.9%) in the ExFix group and 407 (47.1%) in the ORIF group. Most studies indicated a better outcome for ORIF as compared to ExFix. Open reduction and internal fixation had a lower incidence of superficial infection and postoperative osteoarthritis, while ExFix revealed a lower proportion with heterotopic ossification (HTO). Conclusion: ExFix has a higher rate of superficial infections and osteoarthritis, whereas ORIF has a higher incidence of HTO. Larger studies are needed to compare outcomes and investigate the findings of this study further. Clinical significance: This up-to-date meta-analysis on tibial plateau management will help surgeons make evidence-based decisions regarding the use of ORIF versus ExFix. How to cite this article: Naja AS, Bouji N, Eddine MN, et al. A Meta-analysis Comparing External Fixation against Open Reduction and Internal Fixation for the Management of Tibial Plateau Fractures. Strategies Trauma Limb Reconstr 2022;17(2):105-116.

18.
J Orthop Surg Res ; 17(1): 210, 2022 Apr 07.
Article in English | MEDLINE | ID: mdl-35392956

ABSTRACT

INTRODUCTION: Schatzker type III fractures of the tibial plateau require elevation of the depressed portions to regain articular congruity. Balloon tibioplasty has been used as an alternative to conventional metal instruments for elevation of the lateral tibial plateau. This study compared functional outcomes following balloon tibioplasty or conventional osteosynthesis techniques in patients with type III fractures of the tibial plateau. MATERIALS AND METHODS: A systematic literature search was performed using PubMed, EMBASE, and Cochrane Library to identify studies published through March 29, 2021, pertaining to balloon tibioplasty or conventional osteosynthesis techniques for type III fractures. Non-human studies, opinion or editorial pieces, systematic reviews, case series (< 5 patients), and articles published in a non-English language were excluded. Primary outcomes were Rasmussen clinical score, range of motion, and Knee Society Score (KSS). A Joanna Briggs Institute (JBI) risk of bias assessment was performed for all studies. RESULTS: A total of 95 studies were identified, with 10 studies (and 132 total patients) meeting inclusion criteria: 1 study focused on balloon tibioplasty, 8 studies reported outcomes following conventional osteosynthesis, and 1 study compared outcomes of the two techniques. Mean follow-up times varied widely, from 4 to 76.3 months. Where reported, balloon tibioplasty resulted in good to excellent functional outcomes as indicated by Rasmussen clinical scores (mean 28.3 in a case series; mean 28.9 in a randomized controlled trial) and range of motion (≥ 140° in both studies) 1-2 years following surgery. KSS was not reported consistently enough for comparison. Studies ranged from low to high risk of bias according to the JBI assessment. CONCLUSIONS: Balloon tibioplasty can lead to excellent functional outcomes in patients with depression fractures of the lateral tibial plateau. More research is needed to directly compare outcomes following treatment with balloon tibioplasty or conventional osteosynthesis techniques.


Subject(s)
Tibial Fractures , Fracture Fixation, Internal/methods , Humans , Randomized Controlled Trials as Topic , Range of Motion, Articular , Retrospective Studies , Tibia , Tibial Fractures/diagnostic imaging , Tibial Fractures/surgery , Treatment Outcome
19.
J Orthop ; 30: 120-126, 2022.
Article in English | MEDLINE | ID: mdl-35280449

ABSTRACT

Introduction and Aim: Periprosthetic femoral fractures (PFF) represent an increasing clinical and economic burden. This study aims to determine the optimal configuration of a bridge-combined internal fixation system in the treatment of Vancouver type B1 PFF, using finite element analysis. Materials and methods: A three-rod ortho-bridge system (OBS) fixation model was used to evaluate the optimal configuration of four target parameters: position of the third rod; intersection angle between the proximal screws; connecting rod diameter; and number of screws used. Femoral displacement and the maximum von Mises stress of the OBS were used as the evaluation indices, to analyze the PFF and to determine the optimal use of an OBS. For each parameter, various candidate options were tested. Results: Finite element analysis revealed that the rate of femoral displacement and the maximum von Mises stress of the OBS were at a minimum when there was a 35 mm downward movement of the third rod from the baseline. Therefore, the optimal position of third rod fixation was 35 mm below the fovea capitis of the femur. The optimal intersection angles between the proximal screws were found to be 71.92° or 84°. A 6 mm diameter connecting rod proved to be most effective. Configuration d, utilizing 7 screws, represented the most clinically appropriate screw number configuration, despite configuration f, utilizing 9 screws, eliciting the best evaluation indices. Conclusion: An OBS used in the above-described configuration is well suited to the characteristics of PFF and provides an effective and reliable means for their treatment.

20.
BMC Musculoskelet Disord ; 23(1): 129, 2022 Feb 09.
Article in English | MEDLINE | ID: mdl-35139836

ABSTRACT

BACKGROUND: Application of a posterior plate for tibia plateau fractures associated with posterior column involvement is becoming a widespread standard practice as previous studies have shown that additional fixation of the posterior column with a posteromedial buttress plate creates strongest fixation in terms of fracture stabilization This study evaluated the clinical and radiological results of patients undergoing surgery for complex tibial plateau fractures involving the posterior column with a posteromedial plate applied via a medial midline incision. METHODS: Medical records of patients undergoing surgery for Schatzker type IV, V, and VI tibia plateau fractures involving the posterior column in our institution were reviewed retrospectively. Patients with a follow-up of less than 1 year, pathological fractures, posterolateral column fractures requiring separate fixation, and open fractures were excluded from the study. Three-dimensional computed tomography (3D CT) was performed in all patients before surgery. The study population consisted of 25 patients (21 males and 4 females) with a mean age of 41.5 (19-66) years. The etiologies of the fractures were traffic accidents in seven cases, pedestrian falls in five cases, falls from a height in seven cases, and motor vehicle accidents in six cases. RESULTS: The mean follow-up period was 15.9 months (12-25), mean time to union was 14.32 (9-20) weeks, mean Knee Society score (KSS) was 88 (81-95), and range of movement (ROM) was 123° (95°-140°). Loss of reduction was detected in only one patient (4%). A superficial incisional infection occurred in an anterolateral incision in only one patient (4%), and it recovered after oral antibiotic therapy. None of the patients required early implant removal and none had vascular or nerve complications in the postoperative period. Postoperatively, 23 (92%) patients had anatomical reduction and 2 (8%) had acceptable reduction in the sagittal plane CT sections. Acceptable reduction was achieved in 6(24%) patients and anatomical reduction was achieved in 19 (76%) in the coronal plane CT sections (Table 2). CONCLUSIONS: Clinical results of posteromedial plate application using a single medial midline incision is promising as complication rates were very low and knee scores were high.


Subject(s)
Tibia , Tibial Fractures , Adult , Bone Plates , Female , Fracture Fixation, Internal/adverse effects , Humans , Male , Retrospective Studies , Tibial Fractures/diagnostic imaging , Tibial Fractures/surgery , Treatment Outcome
SELECTION OF CITATIONS
SEARCH DETAIL
...