Esthetic Reconstruction of Badly Mutilated Endodontically Treated Teeth Using Glass Fiber Reinforced Post: A Case Report.

Cast-metal posts have historically been used to repair teeth that have undergone endodontic treatment before receiving aesthetic rehabilitation. Resources have been used to create biocompatible dental posts that can meet functional and cosmetic standards since early posts were difficult to use. These activities led to the development of glass-fiber and carbon-based posts for use in adhesive dental procedures that have translucencies and flexibility close to that of dentin. The use of translucent glass-fiber posts for the repair of pulpless teeth is demonstrated in this case study.

Surface modification of glass fiber-reinforced composite posts to enhance their bond strength to resin-matrix cements: an integrative review.

BACKGROUND: Endodontically treated teeth usually can reveal an extensive loss of dental structure and require the use of intraradicular posts to provide adequate support and retention. Retention of the post depends on the surface treatment of the endodontic post itself and on the root canal dentin as well as on the type of resin-matrix cement. PURPOSE: The main aim of this study was to conduct an integrative review on the influence of different surface treatment methods of glass fiber-reinfored resin composite (GFRC) posts on their push-out bond strength to resin-matrix cements in endodontically treated teeth rehabiliation. METHOD: A literature search was performed on PubMed (via National Library of Medicine) regarding articles published within the last 10 years, using the following combination of search terms: "intracanal post" OR "endodontic post" OR "root canal post" OR "intraradicular post" OR "glass fiber" AND "resin cement" AND "adhesion" OR "bond strength" OR "shear bond strength" OR "push out". RESULTS: Results from the selected studies recorded the highest push-out bond strength around 22.5 MPa) on GFRC posts to resin-matrix cements when the surfaces were pre-treated by grit-blasting with silicate followed by silane conditioning. However, high values of push-out bond strength (21.5 MPa) were also noticed for GFRC posts after etching with hydrogen peroxide followed by silance conditioning. Thus, the highest values of bond strength of endodontic posts to the resin-matrix cements were recorded when a combined physico-chemical approach was assessed. Non-treated surfaces showed the lowest bond strength values between 5 to and 9 MPa. Surface analyses of GFRC posts showed an increased roughness after grit-blasting or etching that promoted a mechanical interlocking of the adhesive and resin-matrix cements. CONCLUSION: The combined treatment of glass fiber-reinforced resin composite post surfaces by physical and chemical methods can promote the increase in roughness and chemical functionalization of the surfaces prior to cementation., That results in a high mechanical interlocking of the resin-matrix cements and a stable retention of the teeth root intracanal posts. CLINICAL RELEVANCE: Combining chemical and physical modification methods of surfaces can provide the most promising adhesion-enhancing pathways of GFRC posts to resin-matrix cements, that can decrease the risk of clinical failures by fracture and detachment of endodontic posts.

Dentes gretados: o que clínicos e especialistas precisam saber / Cracked teeth: What clinicians and specialists need to know

A proposta da presente revisão de literatura foi estabelecer as evidências existentes sobre etiologia, sinais e sintomas, métodos de diagnóstico e tratamento de dentes gretados. Segundo a American Association of Endodontists (AAE), o termo dente gretado (DG) foi definido como uma fratura em um plano que quebra a continuidade do esmalte e da dentina, sem separação das partes, geralmente no sentido mesiodistal, passando pela superfície oclusal, podendo envolver uma ou ambas as cristas marginais. Essa fratura, por apresentar profundidade e direção desconhecidas, pode se estender até a polpa e/ou ligamento periodontal, levando a um quadro de pulpite reversível, pulpite irreversível, necrose pulpar ou, até mesmo, evoluir para uma fratura completa. Atualmente, os DGs estão relacionados à terceira maior causa de dentes perdidos, após cárie e doença periodontal. Estudos indicam uma falta de consenso entre profissionais sobre como tratar dentes gretados, uma questão clínica relevante, que precisa ser priorizada e esclarecida. Nesse contexto, essa revisão abordou a etiologia, sinais e sintomas, métodos de diagnósti- co e tratamento de dentes gretados (AU)

The purpose of this literature review is to examine the existing evidence regarding etiology, signs, symptoms, methods of diagnosis, and treatment of cracked teeth. According to the American Association of Endodontists (AAE), the term cracked tooth (CT) is defined as "a fracture in a plane that breaks the continuity of the enamel and dentin, without separation of the parts, usually in the mesiodistal direction, passing through the surface occlusal, which may involve one or both of the marginal ridges." Due to its unknown depth and direction, this fracture can extend to the pulp and periodontal ligament, leading to reversible pulpitis, irreversible pulpitis, pulp necrosis, or even progress to a complete fracture. Currently, cracked teeth are related to the third largest cause of missing teeth, after caries and periodontal disease. Studies indicate a lack of consensus among professionals about treating cracked teeth, a clinically relevant issue that needs to be prioritized and clarified. In this context, this review addressed the etiology, signs and symptoms, diagnostic methods, and treatment of cracked teeth (AU).

Prevalence of vertical root fractures in teeth planned for apical surgery. A retrospective cohort study.

AIM: To evaluate retrospectively the prevalence of vertical root fractures (VRFs) in a cohort of patients during apical surgery and the factors possibly associated with VRF. METHODOLOGY: The sample consisted of 944 root filled teeth belonging to 768 patients (49.3% males and 50.7% females; mean age 43.5 ± 11.2 years, range 22-68 years), consecutively referred for endodontic surgery over a six-year period. All patients underwent a clinical assessment of their signs and symptoms. Periapical radiographs of teeth that were candidates for endodontic surgery were taken. Sixty-eight teeth with VRF were identified. Vertical root fractures were identified in pre-surgical screenings in 32 cases (47.1%), and these did not undergo surgery. Another 36 cases of VRF were noted during the intervention for root-end resection. The influence of posts, post type, tooth type, periodontal probing defects, spontaneous pain, sinus tract and follow-up duration was assessed using a logistic regression analysis. RESULTS: Vertical root fractures occurred significantly more frequently (P < 0.001) when a post was present (61 VRF out of 377 teeth with post, prevalence 16.2%) than in teeth without a post (1.2%). Threaded posts and cast posts were significantly more involved in VRF than fibre, silica or carbide posts (P < 0.001). Most fractures (80.9%) occurred 1-5 years after root canal treatment. Sinus tracts, probing defects and spontaneous pain were significantly more associated with VRF cases than with nonfractured teeth. CONCLUSIONS: In the present group of teeth, the major risk for VRF was represented by posts retained by actively engaging the canal via mechanical design (thread) or by frictional fit (cast).

Biomechanical behavior of teeth without remaining coronal structure restored with different post designs and materials.

The aim of this study was to access the biomechanical behavior of teeth without remaining coronal structure when restored with posts of different materials and configurations. Fifty bovine teeth (n=10 per group) with standard dimensions were restored as follows: cast post and core (CPC), prefabricated metallic post (PFM), parallel glass-fiber post (P-FP), conical glass-fiber post (C-FP) or composite core (no post, CC). The survival rate during thermomechanical challenging (TC), the fracture strength (FS), and failure pattern (FP) were evaluated. Finite element models were realized to evaluate the stress distribution with a 100N load. All post-containing teeth survived TC, while CC had 30% of failures. CPC and C-FP had the higher fracture strength, but a high number of irreparable fractures (60%), such as PFM (70%). Von Mises analysis has shown the maximum stresses into the canal in groups restored with metallic posts, while glass-fiber posts and CC presented the maximum stresses at load contact point in the crown. CPC led to higher modified von Mises (mvM) stress in the cervical third of dentin. However, mvM values did not reach the dentin fracture limit for any group. Analysis of maximal contact pressure has shown better stress distribution along with the dentin interface in post-containing groups, especially for CPC.

Comparison of compressive strength among three different intracanal post materials in primary anterior teeth: An in vitro study.

OBJECTIVE: The objective of our study was to compare the fracture resistance and the mode of failure among three different post materials in primary anterior teeth. MATERIALS AND METHODS: A total of sixty extracted primary anterior teeth were selected for the study. The samples were divided into three groups of twenty teeth each: Group I (Ribbond), Group II (Omega loop), and Group III (Glass fiber post). Pulp therapy was followed by intracanal post and crown buildup. The samples were mounted in self-cure acrylic and subjected to compressive strength test using universal testing machine (Instron). The maximum force at which the tooth fractured was recorded. RESULTS: The values were subjected to one-way analysis of variance. The mean compressive strength values of Ribbond, omega loop, and glass fiber post were found to be 83.25 N, 61.60 N, and 75.55 N, respectively. The P value was found to be 0.220. CONCLUSION: Group I (Ribbond) showed the highest fracture resistance values followed by Group III (Glass fiber post) and Group II (Omega loop). Although there is difference in mean values, they were nonsignificant.

Influence of intracanal post on apical periodontitis identified by cone-beam computed tomography

The determination of the success of endodontic treatment has been often discussed based on outcome obtained by periapical radiography. The aim of this study was to verify the influence of intracanal post on apical periodontitis detected by cone-beam computed tomography (CBCT). A consecutive sample of 1020 images (periapical radiographs and CBCT scans) taken from 619 patients (245 men; mean age, 50.1 years) between February 2008 and September 2009 were used in this study. Presence and intracanal post length (short, medium and long) were associated with apical periodontitis (AP). Chi-square test was used for statistical analyses. Significance level was set at p<0.01. The kappa value was used to assess examiner variability. From a total of 591 intracanal posts, AP was observed in 15.06 percent, 18.78 percent and 7.95 percent using periapical radiographs, into the different lengths, short, medium and long, respectively (p=0.466). Considering the same posts length it was verified AP in 24.20 percent, 26.40 percent and 11.84 percent observed by CBCT scans, respectively (p=0.154). From a total of 1,020 teeth used in this study, AP was detected in 397 (38.92 percent) by periapical radiography and in 614 (60.19 percent) by CBCT scans (p<0.001). The distribution of intracanal posts in different dental groups showed higher prevalence in maxillary anterior teeth (54.79 percent). Intracanal posts lengths did not influenced AP. AP was detected more frequently when CBCT method was used.

O objetivo deste estudo foi determinar a influência de retentores intraradiculares na periodontite apical (PA), detectados por radiografia periapical (RP) e tomografia computadorizada de feixe cônico (TCFC). Um total de 1.020 imagens, tomadas de 619 pacientes (245 homens, idade média de 50,1 anos), entre Fevereiro de 2008 e Setembro de 2009, foram avaliadas. A presença e o comprimento de retentores intraradiculares (curto, médio e longo) foram associados com a PA. Os dados foram estatisticamente avaliados empregando-se os testes Qui-quadrado e o Kappa. Três observadores avaliaram todas as imagens, considerando-se a presença de retentor intraradicular, seu comprimento e a PA. De um total de 1.020 dentes analisados no estudo, a PA foi detectada em 397 (38,92 por cento) usando RP e em 614 (60,19 por cento) usando TCFC (p<0,001). Em 591 retentores intraradiculares, nos diferentes comprimentos (curto, médio, longo) foram observadas PA usando RP em 15,06 por cento; 18,78 por cento e 7,95 por cento, respectivamente (p=0,466). Considerando os mesmos comprimentos de retentores foram observados PA em 24,20 por cento; 26,40 por cento e 11,84 por cento por meio de TCFC, respectivamente (p=0,154). A distribuição de retentores nos diferentes grupos dentários mostrou elevada prevalência em dentes anteriores superiores (54,79 por cento). Os retentores intraradiculares não influenciaram a PA e as TCFC detectaram mais freqüentemente a periodontite apical.