Optimization of polyethylene terephthalate biodegradation using a self-assembled multi-enzyme cascade strategy.

Although many efforts have been devoted to the modification of polyethylene terephthalate (PET) hydrolases for improving the efficiency of PET degradation, the catalytic performance of these enzymes at near-ambient temperatures remains a challenge. Herein, a multi-enzyme cascade system (PT-EC) was developed and validated by assembling three well-developed PETases, PETaseEHA, Fast-PETase, and Z1-PETase, respectively, together with carboxylesterase TfCa, and hydrophobic binding module CBM3a using scaffold proteins. The resulting PT-ECEHA, PT-ECFPE, PT-ECZPE all demonstrated outstanding PET degradation efficacy. Notably, PT-ECEHA exhibited a 16.5-fold increase in product release compared to PETaseEHA, and PT-ECZPE yielded the highest amount of product. Subsequently, PT-ECs were displayed on the surface of Escherichia coli, respectively, and their degradation efficiency toward three PET types was investigated. The displayed PT-ECEHA exhibited a 20-fold increase in degradation efficiency with PET film compared to the surface-displayed PETaseEHA. Remarkably, an almost linear increase in product release was observed for the displayed PT-ECZPE over a one-week degradation period, reaching 11.56 ± 0.64 mM after 7 days. TfCaI69W/L281Y evolved using a docking-based virtual screening strategy showed a further 2.5-fold increase in the product release of PET degradation. Collectively, these advantages of PT-EC demonstrated the potential of a multi-enzyme cascade system for PET bio-cycling.

Exploring the substrate spectrum of phylogenetically distinct bacterial polyesterases.

The rapid escalation of plastic waste accumulation presents a significant threat of the modern world, demanding an immediate solution. Over the last years, utilization of the enzymatic machinery of various microorganisms has emerged as an environmentally friendly asset in tackling this pressing global challenge. Thus, various hydrolases have been demonstrated to effectively degrade polyesters. Plastic waste streams often consist of a variety of different polyesters, as impurities, mainly due to wrong disposal practices, rendering recycling process challenging. The elucidation of the selective degradation of polyesters by hydrolases could offer a proper solution to this problem, enhancing the recyclability performance. Towards this, our study focused on the investigation of four bacterial polyesterases, including DaPUase, IsPETase, PfPHOase, and Se1JFR, a novel PETase-like lipase. The enzymes, which were biochemically characterized and structurally analyzed, demonstrated degradation ability of synthetic plastics. While a consistent pattern of polyesters' degradation was observed across all enzymes, Se1JFR stood out in the degradation of PBS, PLA, and polyether PU. Additionally, it exhibited comparable results to IsPETase, a benchmark mesophilic PETase, in the degradation of PCL and semi-crystalline PET. Our results point out the wide substrate spectrum of bacterial hydrolases and underscore the significant potential of PETase-like enzymes in polyesters degradation.

Analysis of Poly(ethylene terephthalate) degradation kinetics of evolved IsPETase variants using a surface crowding model.

Poly(ethylene terephthalate) (PET) is a major plastic polymer utilized in the single-use and textile industries. The discovery of PET-degrading enzymes (PETases) has led to an increased interest in the biological recycling of PET in addition to mechanical recycling. IsPETase from Ideonella sakaiensis is a candidate catalyst, but little is understood about its structure-function relationships with regards to PET degradation. To understand the effects of mutations on IsPETase productivity, we develop a directed evolution assay to identify mutations beneficial to PET film degradation at 30 °C. IsPETase also displays enzyme concentration-dependent inhibition effects, and surface crowding has been proposed as a causal phenomenon. Based on total internal reflectance fluorescence microscopy and adsorption experiments, IsPETase is likely experiencing crowded conditions on PET films. Molecular dynamics simulations of IsPETase variants reveal a decrease in active site flexibility in free enzymes and reduced probability of productive active site formation in substrate-bound enzymes under crowding. Hence, we develop a surface crowding model to analyze the biochemical effects of three hit mutations (T116P, S238N, S290P) that enhanced ambient temperature activity and/or thermostability. We find that T116P decreases susceptibility to crowding, resulting in higher PET degradation product accumulation despite no change in intrinsic catalytic rate. In conclusion, we show that a macromolecular crowding-based biochemical model can be used to analyze the effects of mutations on properties of PETases and that crowding behavior is a major property to be targeted for enzyme engineering for improved PET degradation.

Current advances in the structural biology and molecular engineering of PETase.

Poly(ethylene terephthalate) (PET) is a highly useful synthetic polyester plastic that is widely used in daily life. However, the increase in postconsumer PET as plastic waste that is recalcitrant to biodegradation in landfills and the natural environment has raised worldwide concern. Currently, traditional PET recycling processes with thermomechanical or chemical methods also result in the deterioration of the mechanical properties of PET. Therefore, it is urgent to develop more efficient and green strategies to address this problem. Recently, a novel mesophilic PET-degrading enzyme (IsPETase) from Ideonella sakaiensis was found to streamline PET biodegradation at 30°C, albeit with a lower PET-degrading activity than chitinase or chitinase-like PET-degrading enzymes. Consequently, the molecular engineering of more efficient PETases is still required for further industrial applications. This review details current knowledge on IsPETase, MHETase, and IsPETase-like hydrolases, including the structures, ligand‒protein interactions, and rational protein engineering for improved PET-degrading performance. In particular, applications of the engineered catalysts are highlighted, including metabolic engineering of the cell factories, enzyme immobilization or cell surface display. The information is expected to provide novel insights for the biodegradation of complex polymers.

Computation-Based Design of Salt Bridges in PETase for Enhanced Thermostability and Performance for PET Degradation.

Polyethylene terephthalate (PET) is one of the most widely used plastics, and the accumulation of PET poses a great threat to the environment. IsPETase can degrade PET rapidly at moderate temperatures, but its application is greatly limited by the low stability. Herein, molecular dynamics (MD) simulations combined with a sequence alignment strategy were adopted to introduce salt bridges into the flexible region of IsPETase to improve its thermal stability. In the designed variants, the Tm values of IsPETaseI168R/S188D and IsPETaseI168R/S188E were 7.4 and 8.7 °C higher than that of the wild type, respectively. The release of products degraded by IsPETaseI168R/S188E was 4.3 times that of the wild type. Tertiary structure characterization demonstrated that the structure of the variants IsPETaseI168R/S188D and IsPETaseI168R/S188E became more compact. Extensive MD simulations verified that a stable salt bridge was formed between the residue R168 and D186 in IsPETaseI168R/S188D , while in IsPETaseI168R/S188E an R168-D186-E188 salt bridge network was observed. These results confirmed that the proposed computation-based salt bridge design strategy could efficiently generate variants with enhanced thermal stability for the long-term degradation of PET, which would be helpful for the design of enzymes with improved stability.

The structural and molecular mechanisms of type II PETases: a mini review.

The advent of plastics has led to significant advances for humans, although the accompanying pollution has also been a source of concern for countries globally. Consequently, a biological method to effectively degrade polyethylene terephthalate (PET) has been an area of significant scientific interest. Following the report of the highly efficient PET hydrolase from the bacterium Ideonella sakaiensis strain 201-F6 (i.e., IsPETase) in 2016, its structure has been extensively studied, showing that it belongs to the type II PETase group. Unlike type I PETases that include most known cutinases, structural investigations of type II PETases have only been conducted since 2017. Type II PETases are further divided into type IIa and IIb enzymes. Moreover, even less research has been conducted on type IIa plastic-degrading enzymes. Here, we present a review of recent studies of the structure and mechanism of type II PETases, using the known structure of the type IIa PETase PE-H from the marine bacterium Pseudomonas aestusnigri in addition to the type IIb enzyme IsPETase as representatives. These studies have provided new insights into the structural features of type II PETases that exhibit PET catalytic activity. In addition, recent studies investigating the rational design of IsPETases are reviewed and summarized alongside a discussion of controversies surrounding PETase investigations.

Degradation of PET Bottles by an Engineered Ideonella sakaiensis PETase.

Extensive plastic production has become a serious environmental and health problem due to the lack of efficient treatment of plastic waste. Polyethylene terephthalate (PET) is one of the most used polymers and is accumulating in landfills or elsewhere in nature at alarming rates. In recent years, enzymatic degradation of PET by Ideonella sakaiensis PETase (IsPETase), a cutinase-like enzyme, has emerged as a promising strategy to completely depolymerize this polymer into its building blocks. Here, inspired by the architecture of cutinases and lipases homologous to IsPETase and using 3D structure information of the enzyme, we rationally designed three mutations in IsPETase active site for enhancing its PET-degrading activity. In particular, the S238Y mutant, located nearby the catalytic triad, showed a degradation activity increased by 3.3-fold in comparison to the wild-type enzyme. Importantly, this structural modification favoured the function of the enzyme in breaking down highly crystallized (~31%) PET, which is found in commercial soft drink bottles. In addition, microscopical analysis of enzyme-treated PET samples showed that IsPETase acts better when the smooth surface of highly crystalline PET is altered by mechanical stress. These results represent important progress in the accomplishment of a sustainable and complete degradation of PET pollution.

Enhancement of the polyethylene terephthalate and mono-(2-hydroxyethyl) terephthalate degradation activity of Ideonella sakaiensis PETase by an electrostatic interaction-based strategy.

The serious environmental pollution that came up with the continuously growing demand for polyethylene terephthalate (PET) has attracted global concern. The IsPETase which has shown the highest PET degradation activity under ambient temperature is a promising enzyme for PET biodegradation, while poor thermostability limited its practical application. Herein, an electrostatic interaction-based strategy was applied for rational design of IsPETase towards enhanced thermostability. The IsPETaseI139R variant displayed the highest Tm value of 56.4 °C and 3.6-times higher PET degradation activity. Molecular simulations demonstrated that the introduction of salt bridges stabilized the local structures, resulting in robust thermostability. Meanwhile, the IsPETaseS92K/D157E/R251A not only exhibited higher thermostability but also showed a 1.74-fold kcat increase towards mono-(2-hydroxyethyl) terephthalate, which ultimately achieved PET depolymerization to complete monomer TPA. Collectively, the electrostatic interaction-based strategy, together with the derived IsPETase variants, could help promote the bio-recycle of PET, reducing the severe global burden of PET waste.

Overexpression and kinetic analysis of Ideonella sakaiensis PETase for polyethylene terephthalate (PET) degradation.

Ideonella sakaiensis PET hydrolase (IsPETase) is a well-characterized enzyme for effective PET biodegradation. However, the low soluble expression level of the enzyme hampers its practical implementation in the biodegradation of PET. Herein, the expression of IsPETaseMut, one of the most active mutants of IsPETase obtained so far, was systematically explored in E. coli by adopting a series of strategies. A notable improvement of soluble IsPETaseMut was observed by using chaperon co-expression and fusion expression systems. Under the optimized conditions, GroEL/ES co-expression system yielded 75 ± 3.4 mg·L-1 purified soluble IsPETaseMut (GroEL/ES), and NusA fusion expression system yielded 80 ± 3.7 mg·L-1 purified soluble NusA-IsPETaseMut, which are 12.5- and 4.6-fold, respectively, higher than its commonly expression in E. coli. The two purified enzymes were further characterized. The results showed that IsPETaseMut (GroEL/ES) displayed the same catalytic behavior as IsPETaseMut, while the fusion of NusA conferred new enzymatic properties to IsPETaseMut. Although NusA-IsPETaseMut displayed a lower initial hydrolysis capacity than IsPETaseMut, it showed a 1.4-fold higher adsorption constant toward PET. Moreover, the product inhibition effect of terephthalic acid (TPA) on IsPETase was reduced with NusA-IsPETaseMut. Taken together, the latter two catalytic properties of NusA-IsPETaseMut are more likely to contribute to the enhanced product release by NusA-IsPETaseMut PET degradation for two weeks.

Enhancement of the degradation capacity of IsPETase for PET plastic degradation by protein engineering.

The enormous waste of polyethylene terephthalate (PET) plastic has a great negative impact on the ecological environment because of its chemical inertia. To reduce the environmental threat posed by PET plastic, researchers gradually concentrate on the biodegradation of PET plastic. In this study, DuraPETaseN233C/S282C/H214S/S245R (DuraPETase-4M) was designed through protein engineering, which can be used to improve the efficiency of PET plastic biodegradation. Based on the DuraPETase, a pair of disulfide bonds (N233C/S282C) was added to improve the thermal stability. Meanwhile, the key region flexibility adjustment (H214S) was proposed to enhance the biodegradation capacity of PET plastic. Additionally, protein surface electrostatic charge optimization (S245R) was adopted to improve the binding ability between enzyme and PET plastic. Based on molecular dynamic simulations (MDs), the rationality of the design was further verified. This study provides a strategy for obtaining high-efficiency PET degradation mutants and a new possibility of environmentally friendly plastic degradation.

The influences of substrates' physical properties on enzymatic PET hydrolysis: Implications for PET hydrolase engineering.

Plastic pollution in diverse terrestrial and marine environments is a widely recognised and growing problem. Bio-recycling and upcycling of plastic waste is a potential solution to plastic pollution, as these processes convert plastic waste into useful materials. Polyethylene terephthalate (PET) is the most abundant plastic waste, and this material can be degraded by a class of recently discovered bacterial esterase enzymes known as PET hydrolases (PETase). Investigations of the enzymatic hydrolysis of diverse PET molecules have clearly revealed that the biodegradability of various PET substrates depends on both their chemical structure and physical properties, including polymer length, crystallinity, glass transition temperature, surface area, and surface charge. This review summarises the known impacts of crystallinity and other physical properties on enzymatic PET hydrolysis.

[Structure-based engineering of PET hydrolase from Ideonella sakaiensis].

Polyethylene terephthalate (PET) is a synthetic polymer consisting of ester bond-linked terephthalate and ethylene glycol. Tremendous amounts of PET have been produced and majority of them enters terrestrial and marine environment as wastes, posing serious threats to the global ecosystems. In 2016, a PET hydrolase from a PET-assimilating bacterium Ideonalla sakaiensis was reported and termed as IsPETase. This enzyme outperforms other PET-hydrolyzing enzymes in terms of its PET hydrolytic activity at ambient temperature, thus holds a great promise for PET biodegradation. In order to improve IsPETase activity, we conducted structure-based engineering to modify the putative substrate-binding tunnel. Among the several variants to the N233 residue of IsPETase, we discovered that the substitution of N233 with alanine increases its PET hydrolytic activity, which can be further enhanced when combined with a R280A mutation. We also determined the X-ray crystal structure of the IsPETase N233A variant, which shares nearly identical fold to the WT protein, except for an open end of subsite Ⅱ. We hypothesized that the smaller side chain of N233A variant might lead to an extended subsite Ⅱ for PET binding, which subsequently increases the enzymatic activity. Thus, this study provides new clues for further structure-based engineering of PETase.

Excretory expression of IsPETase in E. coli by an enhancer of signal peptides and enhanced PET hydrolysis.

The PET hydrolase from Ideonella sakaiensis (IsPETase) is efficient for PET degradation, which provides a promising solution for environmental contamination by plastics. This study focuses on improving the excretion of IsPETase from E. coli by signal peptide (SP) engineering. A SP enhancer B1 (MERACVAV) was fused to the N-terminal of commonly-used SP (PelB, MalE, LamB, and OmpA) to mediate excretion of IsPETase. Strikingly, the modified SP B1OmpA, B1PelB, and B1MalE significantly increased the excretion of IsPETase, while IsPETase was basically expressed in periplasmic space without enhancer B1. The excretion efficiency of IsPETase mediated by B1PelB was improved by 62 folds compared to that of PelB. The hydrolysis of PET by crude IsPETase in culture solution was also enhanced. Furthermore, the amount of released MHET/TPA from PET by IsPETase was increased by 2.7 folds with pre-incubation of hydrophobin HFBII. Taken together, this work may provide a feasible strategy for the excretion and application of the IsPETase.

Protein engineering of stable IsPETase for PET plastic degradation by Premuse.

Poly(ethylene terephthalate) (PET) is used widely by human beings, but is very difficult to degrade. Up to now, the PET degradation effect of PETase from Ideonella sakaiensis 201-F6 (IsPETase) variants with low stability and activity was not ideal. In this study, a mutation design tool, Premuse, was developed to integrate the sequence alignment and quantitative selection of the preferred mutations based on natural sequence evolution. Ten single point mutants were selected from 1486 homologous sequences using Premuse, and then two mutations (W159H and F229Y) with improved stability were screened from them. The derived double point mutant, W159H/F229Y, exhibited a strikingly enhanced enzymatic performance. Its Tm and catalytic efficiency values (kcat/Km) respectively increased by 10.4 °C and 2.0-fold using p-NPP as the substrate compared with wild type. The degradation activity for amorphous PET was increased by almost 40-fold in comparison with wild type at 40 °C in 24 h. Additionally, the variant could catalyze biodegradation of PET bottle preform at a mean rate of 23.4 mgPET/h/mgenzyme. This study allowed us to design the mutation more efficiently, and provides a tool for achieving biodegradation of PET pollution under mild natural environments.

Yeast cell surface display of bacterial PET hydrolase as a sustainable biocatalyst for the degradation of polyethylene terephthalate.

Enzymatic hydrolysis of polyethylene terephthalate (PET) is considered to be an environmentally friendly method for the recycling of plastic waste. Recently, a bacterial enzyme named IsPETase was found in Ideonella sakaiensis with the ability to degrade amorphous PET at ambient temperature suggesting its possible use in recycling of PET. However, applying the purified IsPETase in large-scale PET recycling has limitations, i.e., a complicated production process, high cost of single-use, and instability of the enzyme. Yeast cell surface display has proven to be an effectual alternative for improving enzyme degradation efficiency and realizing industrial applications. This chapter deals with the construction and application of a whole-cell biocatalyst by displaying IsPETase on the surface of yeast (Pichia pastoris) cells.

IsPETase Is a Novel Biocatalyst for Poly(ethylene terephthalate) (PET) Hydrolysis.

Poly(ethylene terephthalate) (PET) is one of the most widely used synthetic polyesters, but also a major cause of plastic pollution. Because the chemical degradation of PET would be uneconomical and rather burdensome, considerable efforts have been devoted to exploring enzymatic processes for the disposal of PET waste. Many PET-hydrolyzing enzymes have been reported in recent decades, some of which demonstrate excellent potential for industrial applications. This review sets out to summarize the state of investigation into IsPETase, a cutinase-like enzyme from Ideonella sakaiensis possessing ability to degrade crystalline PET, and to gain further insight into the structure-function relationship of IsPETase. Benefiting from the continuing identification of novel cutinase-like proteins and growing availability of the engineered IsPETase, we may anticipate future developments in this type of enzyme would generate suitable biocatalyst for industrial use.

Structure-based engineering of PET hydrolase from Ideonella sakaiensis / 生物工程学报

Polyethylene terephthalate (PET) is a synthetic polymer consisting of ester bond-linked terephthalate and ethylene glycol. Tremendous amounts of PET have been produced and majority of them enters terrestrial and marine environment as wastes, posing serious threats to the global ecosystems. In 2016, a PET hydrolase from a PET-assimilating bacterium Ideonalla sakaiensis was reported and termed as IsPETase. This enzyme outperforms other PET-hydrolyzing enzymes in terms of its PET hydrolytic activity at ambient temperature, thus holds a great promise for PET biodegradation. In order to improve IsPETase activity, we conducted structure-based engineering to modify the putative substrate-binding tunnel. Among the several variants to the N233 residue of IsPETase, we discovered that the substitution of N233 with alanine increases its PET hydrolytic activity, which can be further enhanced when combined with a R280A mutation. We also determined the X-ray crystal structure of the IsPETase N233A variant, which shares nearly identical fold to the WT protein, except for an open end of subsite Ⅱ. We hypothesized that the smaller side chain of N233A variant might lead to an extended subsite Ⅱ for PET binding, which subsequently increases the enzymatic activity. Thus, this study provides new clues for further structure-based engineering of PETase.