Arthroscopically Assisted Coracoclavicular (CC) Stabilization Using a Suture Button Device for Lateral Clavicle Fractures with CC Ligament Injury.

Background: Lateral clavicle fractures represent approximately 10-15% of all clavicle fractures. However, controversy exists regarding the optimal surgical treatment because of instability associated with the coracoclavicular (CC) ligament injury and a small lateral fragment. The purpose of this study was to evaluate the radiological and clinical outcomes of arthroscopically assisted CC stabilization using a suture button device for lateral clavicle fractures accompanied by CC ligament injury. Methods: A retrospective observational study involved six patients with modified Neer type IIB fractures, which were treated with the technique and followed for 12 months. Postoperative range of motion (ROM) and X-rays were evaluated every 3 months. Shoulder functional scores (University of California Los Angeles score, Japanese Orthopedics Association score) and visual analog scale (VAS) scores for pain (at rest, at night, and during motion) and for satisfaction were analyzed 12 months after surgery. Results: Early phase ROM recovery and excellent outcomes were achieved. All patients achieved bone union. Slight superior clavicle displacement and bone hole dilation occurred with no critical complications. Conclusions: Arthroscopically assisted CC stabilization with a suture button device for unstable lateral clavicle fractures can produce satisfactory radiological and clinical results.

Surgical and non-surgical treatment for fully displaced lateral clavicle fractures have similar outcomes: An observational register study of 113 patients.

INTRODUCTION: Whether displaced lateral clavicle fractures should be treated surgically remains controversial. This study aims to compare outcomes after surgical versus non-surgical treatment of such fractures. PATIENTS AND METHODS: 113 patients with lateral clavicle fractures registered in the Swedish Fracture Register (SFR) during 2018 and with complete displacement on radiography were included in this cohort study. Linkage with the National Patient Register provided information on baseline medical comorbidities and further interventions. Patient-reported outcome measures (PROM) were assessed using the European Quality of Life Scale (EQ-5D-3L), the Short Musculoskeletal Function Assessment (SMFA), and the Quick Disabilities of the Arm, Shoulder and Hand (QDASH). The primary outcome was the total number of initial and delayed surgical procedures. The secondary outcome was difference in PROM between surgically and non-surgically treated patient groups. RESULTS: At a mean follow-up of 4.4 (range 3.9-4.9) years, 35 (67 %) of the 52 patients initially treated surgically had undergone a secondary procedure, mostly for implant removal. Of the 61 initially non-surgically treated patients, 3 (5 %) underwent delayed surgical treatment due to non- or malunion. 45 (40 %) patients responded to follow-up questionnaires, but no statistically significant differences were found in any PROM between groups. CONCLUSIONS: Two thirds of surgically treated patients with displaced lateral clavicle fractures underwent two procedures. The need for delayed surgical treatment in non-surgically treated patients was low and PROM was similar in both treatment groups. Nonsurgical treatment should be considered as an option to surgery for fully displaced lateral fractures of the clavicle more often.

The application of inverted lateral clavicle locking compression plate for medial clavicle fractures: biomechanical study and clinical implementation.

BACKGROUND: There has been no absolute consensus on the optimal implant for fixation of medial clavicle fracture. The purpose of the present study was to test the biomechanical efficacy of inverted lateral clavicle locking compression plate (LCP-LC) in fixation of this specific fracture location by finite element analysis. METHODS: Transverse and comminuted medial clavicle fracture simulated models stabilized by three different devices including inverted LCP-LC, superior clavicle LCP (LCP-SC), and dual reconstruction (LCP-RP) with LCP-SC were investigated biomechanical performance under three loading conditions, i.e., axial compression, inferior bending, and axial torsion. RESULTS: EQV stress exhibited on implant and elastic strain at fracture site under inferior bending was greater than other loading cases. LCP-SC construct represented the greatest EQV stress and elastic strain. The inverted LCP-LC construct demonstrated lower EQV stress than the LCP-SC construct and was comparable to dual plating. Under axial compression and axial torsion, elastic strain produced from the inverted LCP-LC construct was comparable to dual plating, but greater than dual plating when subjected to inferior bending. CONCLUSION: By the results of FE analysis, inverted LCP-LC could be a potential application for fixation of clavicle fracture with short medial fragment.

Are displaced distal clavicle fractures associated with inferior clinical outcomes following nonoperative management? A systematic review.

BACKGROUND: Management of displaced distal clavicle fractures remains a topic of discussion because of notoriously high nonunion rates, but there is little documented in the literature as to what effect this may have on patient-reported function. The aim of this systematic review was to look at nonoperative management following displaced distal clavicle fractures to determine union rates, complications, and patient-reported outcome measures. METHODS: A review of the online databases MEDLINE and Embase was conducted according to the Preferred Reporting Items for Systematic reviews and Meta-Analyses (PRISMA) guidelines. Clinical studies that included a cohort of nonoperatively managed displaced distal clavicle fractures and reported on union rate, complications, and patient-reported functional scores were included. RESULTS: Eleven studies were eligible for inclusion (2 randomized controlled trials, 1 prospective noncomparative cohort study, 5 retrospective comparative cohort studies, and 3 case series) with a total of 779 patients included in this review. Average union rate was 63.2% (22.2%-94.4%) in nonoperatively managed patients, compared with 96.3% (87.9%-100%) in operatively managed patients. The Constant-Murley score and Disabilities of the Arm, Shoulder, and Hand questionnaire were the most frequently used outcome measure tools. No study demonstrated any significant difference in any outcome measure when comparing nonoperative with operative treatment. Complication rate (including nonunion) in nonoperatively managed patients was 45.1%, with 11.1% requiring delayed surgery. Average complication rate in the operatively managed groups was 41.2%, with 40.1% requiring a second operation. CONCLUSION: Nonoperative management of displaced distal clavicle fractures results in higher nonunion rates, but shoulder function remains excellent, and risk of complications and delayed surgery are low. Decision making must take into account patient factors and expectations to provide high-quality, individualized care.

Operative Management for Displaced Distal Clavicle Fractures.

This article reviews techniques and outcomes of surgical fixation for distal clavicle fractures. Near 100% union has been reported for several techniques. The most common are locked plating, coracoclavicular fixation and a combination of plating with CC fixation. Hook plates are useful for particular fracture patterns, but there can be complications specific to this implant. Low-profile constructs are favored due to the high rates of symptomatic hardware. Fixation of subacute and chronic injuries can provide reliable functional improvements, but is inferior to acute fixation. Surgery is generally the treatment of choice for displaced fractures in athletes.

Complications following arthroscopic-assisted coracoclavicular stabilization in patients with unstable lateral clavicle fractures.

PURPOSE: Lateral clavicle fractures are unstable and prone to nonunions, which is why they are often treated surgically rather than conservatively. Despite the variety of surgical techniques found in the literature, the best method for treating this rare fracture type has not yet been determined. Our case series aimed to describe a coracoclavicular (CC) reconstruction technique and to assess complications and patient outcomes 1 year postoperatively. METHODS: Nineteen patients who underwent surgery for an unstable lateral clavicle fracture (IIB, IIC, IID) with a suture button device (Dog Bone, Arthrex, Inc., Naples, FL, USA) were available for clinical and radiological follow-up. The assessments included the American Shoulder and Elbow Surgeons Standardized Shoulder Assessment (ASES) score, the Constant Score (CS), the Subjective Shoulder Value (SSV), as well as the ipsilateral and contralateral coracoclavicular distance. RESULTS: The median age was 50 years (IQR 28-59), 13 (68.4%) were male and the delay to surgery was 5 days (IQR 2-9). The median clinical scores were 100 (ASES), 91 (CS), and 95 (SSV). The CC distance improved postoperatively (p = 0.003). However, nonunion occurred in 3 (15.8%) patients, 5 (26.3%) had other complications, and 5 (26.3%) needed revision surgery (4 plate removals and 1 pseudoarthrosis). The overall complication rate was 36.8%. CONCLUSION: Restoring the CC ligaments alone could not reliably achieve fracture stability, with more than one-third of cases in this series experiencing major complications. Given the high revision and nonunion rates, we do not recommend this type of surgical technique.

Comparison of Interobserver Agreement of Four Classification Systems for Lateral Clavicle Fractures between Two Groups of Surgeons: A Multicenter Study.

OBJECTIVE: Distal clavicle fracture classification directly affects the treatment decisions. It is unclear whether the classification systems implemented differ depending on surgeons' backgrounds. This study aimed to compare the interobserver agreement of four classification systems used for lateral clavicle fractures by shoulder specialists and general trauma surgeons. METHODS: Radiographs of 20 lateral clavicle fractures representing a full spectrum of adult fracture patterns were analyzed by eight experienced shoulder specialists and eight general trauma surgeons from 10 different hospitals. All cases were graded according to the Orthopedic Trauma Association (OTA), Neer, Jäger/Breitner, and Gongji classification systems. To measure observer agreement, Fleiss' kappa coefficient (κ) was applied and assessed. RESULTS: When only X-ray films were presented, both groups achieved fair agreement. However, when the 3D-CT scan images were provided, improved interobserver agreement was found in the specialist group when the OTA, Jäger/Breitner, and Gongji classification systems were used. In the generalist groups, improved agreement was found when using the Gongji classification system. In terms of interobserver reliability, the OTA, Neer, and Jäger/Breitner classification systems showed better agreement among shoulder specialists, while a slightly lower level of agreement was found using the Gongji classification system. For the OTA classification system, interobserver agreement had a mean kappa value of 0.418, ranging from 0.446 (specialist group) to 0.402 (generalist group). For the Neer classification system, interobserver agreement had a mean kappa value of 0.368, ranging from 0.402 (specialist group) to 0.390 (generalist group). For the Jäger/Breitner classification system, the inter-observer agreement had a mean kappa value of 0.380, ranging from 0.413 (specialist group) to 0.404 (generalist group). For the Gongji classification system, interobserver agreement had a mean kappa value of 0.455, ranging from 0.480 (specialist group) to 0.485 (generalist group). CONCLUSION: Generally speaking, 3D-CT scans provide a richer experience that can lead to better results in most classification systems of lateral clavicle fractures, highlighting the value of digitization and specialization in diagnosis and treatment. Competitive interobserver agreement was exhibited in the generalist group using the Gongji classification system, suggesting that the Gongji classification is suitable for general trauma surgeons who are not highly experienced in the shoulder field.

Operative management of lateral third clavicle fractures: a comparison of internal fixation methods.

PURPOSE: Clavicle fractures in the lateral third are associated with more complications. Various methods of internal fixation exist; however, there is no consensus which should be employed. The purpose of this study was to evaluate the outcomes of these various methods in our regional trauma unit. METHODS: We performed a retrospective review of patients who underwent internal fixation of a lateral clavicle fracture in our unit between 1 August 2014 and 31 July 2019. Demographic and outcome data were extracted from electronic care records and imaging systems. RESULTS: In total, 44 patients were included, with the following demographics: mean age 26 years, 63.6% male, 65.9% high-energy injury, 68.2% Neer II fracture. The following operations were performed: hook plate fixation (HPF) = 10, locking plate fixation (LPF) = 16, coracoclavicular ligament reconstruction (CCLR) = 12, and LPF + CCLR = 6. Patients having LPF had a significantly larger post-operative coracoclavicular distance (7.6 mm vs 13.5 mm, p < 0.01), and trends towards a lesser decrease in CCD (9.9 mm vs 12.6 mm, p = 0.37) and incomplete ACJ reduction (50.0% vs 89.3%, p = 0.11). There was a significantly higher re-operation rate after HPF (100% vs 23.5%, p < 0.01). There were no differences in time to union or duration of follow-up. CONCLUSION: In our unit there is no clearly favoured method of internal fixation of lateral clavicle fractures. When LPF is used, there should be consideration of concomitant CCLR. The high rate of re-operation after HPF is concordant with previous research.

[Combined intrapulmonary/intramediastinal K-wire position after K-wire osteosynthesis of the clavicle : A case report]. / Kombinierte intrapulmonale/intramediastinale K-Draht-Lage nach K-Draht-Osteosynthese an der Clavicula : Ein Case Report.

BACKGROUND: Lateral clavicle fractures can be treated both conservatively and surgically depending on the fracture classification. Different surgical techniques have been described for the operative treatment. The selection of the appropriate technique is decisive for the functional outcome and healing process without complications. CASE: We report on a patient with a secondary dislocation of two Kirschner wires after Kirschner wire osteosynthesis. The secondary dislocation caused one of the wires to migrate into the mediastinum and pulmonary tissue, directly under the aortic arch. To prevent further migration with potential damage to surrounding structures, a uniportal video-assisted thoracoscopy was performed to retrieve the wire. CONCLUSION: The treatment of lateral clavicle fractures should be performed with bent Kirschner wires as they can otherwise lead to severe complications including the occurrence of pseudarthrosis or secondary migration of the material. Safe and stable surgical techniques (plate osteosynthesis, hybrid treatment) should be preferred if they are available.

Biomechanical analysis of plating techniques for unstable lateral clavicle fractures with coracoclavicular ligament disruption (Neer type IIB).

BACKGROUND: Neer type IIB lateral clavicle fractures are inherently unstable fractures with associated disruption of the coracoclavicular (CC) ligaments. Because of the high rate of nonunion and malunion, surgical fixation is recommended; however, no consensus has been reached regarding the optimal fixation method. A new plating technique using a superior lateral locking plate with anteroposterior (AP) locking screws, resulting in orthogonal fixation in the lateral fragment, has been designed to enhance stability and reduce implant failure. The purpose of this study was to biomechanically compare 3 different clavicle plating constructs within a fresh frozen human cadaveric shoulder model. METHODS: Twenty-four fresh frozen cadaveric shoulders were randomized into 3 groups (n = 8 specimens): group 1, lateral locking plate only (Medartis Aptus Superior Lateral Plate); group 2, lateral locking plate with CC stabilization (No. 2 FiberWire); and group 3, lateral locking plate with 2 AP locking screws stabilizing the lateral fragment. All specimens were subject to cyclic loading of 70 N for 500 cycles. Data were analyzed for gap formation after cyclic loading, construct stiffness, and ultimate load to failure, defined by a marked decrease in the load displacement curve. RESULTS: After 500 cycles, there was no statistically significant difference between the 3 groups in gap formation (P = .179). No specimen (0/24) failed during cyclic loading. Ultimate load to failure was significantly higher in group 3 compared to group 1 (286 N vs. 167 N; P = .022), but not to group 2 (286 N vs. 246 N; P = .604). There were no statistically significant differences in stiffness (group 1: 504 N/mm; group 2: 564 N/mm; group 3: 512 N/mm; P = .712). Peri-implant fracture was the primary mode of failure for all 3 groups, with group 3 demonstrating the lowest rate of peri-implant fractures (group 1: 6/8; group 2: 7/8; group 3: 4/8; P = .243). CONCLUSION: Biomechanical evaluation of the clavicle plating techniques showed effective fixation across all specimens at 500 cycles. The lateral locking plate with orthogonal AP locking screw fixation in the lateral fragment demonstrated the greatest ultimate failure load, followed by the lateral locking plate with CC stabilization. This new plating technique showed compatible stiffness and gap formation when compared to conventional lateral locking plates as well as plates with CC fixation. The use of orthogonal screw fixation in the distal fragment may negate against the need for CC stabilization in these types of fractures, thus minimizing surgical dissection around the coracoid and potential complications.

Comparison of Locking Plate Osteosynthesis versus Coracoclavicular Stabilization for Neer Type IIB Lateral Clavicle Fractures.

Background: The best option for the treatment of Neer type IIB lateral clavicle fractures remains controversial. The aim of this study was to compare outcomes and complications between pre-contoured locking plate osteosynthesis (PLPO) and coracoclavicular stabilization (CCS) using a TightRope for the treatment of type IIB fractures. Methods: Forty-six consecutive type IIB fractures were treated with PLPO (17 cases) or CCS (29 cases). The mean follow-up period was 33.7 months (range, 12-144 months). Radiographic outcomes were evaluated using serial plain radiographs. Clinical outcomes were evaluated using the University of California, Los Angeles (UCLA) score, the American Shoulder and Elbow Surgeons (ASES) score, and subjective shoulder value (SSV). Results: Of the 46 cases, complete bony union within 6 months after surgery was achieved in 42 cases (91.3%). The union rate was 100% (17/17) in the PLPO group and 86.2% (25/29) in the CCS group, showing a statistically significant difference (p = 0.043). No significant differences in terms of UCLA score (32.8 vs. 32.1), ASES score (93.2 vs. 90.8), or SSV (89.1% vs. 90.3%) were observed between the PLPO and CCS groups. The complication rates were 17.6% (3/17; 2 cases of screw breakage and 1 case of stiffness) in the PLPO group and 37.9% (11/29; 4 cases of nonunion, 3 cases of stiffness, 2 cases of skin irritation, 1 case of superficial infection, and 1 case of coracoid button migration) in the CCS group, showing no statistically significant difference (p > 0.05). Four cases with nonunion after CCS did not require reoperation because they had good to excellent clinical outcomes without radiographic progression. Conclusions: Although a higher nonunion rate was observed in the CCS group compared with the PLPO group, satisfactory clinical outcomes were obtained for both groups. Both techniques can be regarded as useful options for the treatment of Neer type IIB lateral clavicle fractures.

Comparative Analysis of Clavicular Hook Plate Versus Distal Radius Volar Plate With Coracoclavicular Augmentation for Neer's Type 2b Lateral Clavicle Fractures: A Prospective Study.

Background Clavicle fractures are common injuries in the adult population. The commonest site of fracture in the clavicle is the mid-shaft followed by the lateral end fracture. The anatomy and biomechanics of the lateral end clavicle make it prone to be unstable. Conservative management usually fails due to the deforming forces. Aim Our study evaluates pain relief, functional outcome, and the union rate in unstable lateral end clavicle fracture fixed by two different modalities of operative management, namely clavicular hook plate fixation and distal radius volar plate fixation. Materials and method A total of 60 patients with the unstable lateral end of clavicle fracture were evaluated in this study at a single tertiary care center between August 2015 and September 2021. Half of the patients (30 patients) were managed by open reduction and internal fixation with clavicular hook plate. The remaining half (30 patients) underwent open reduction and internal fixation by distal radius volar plate supplemented with coracoclavicular fixation. All patients were followed up for a mean duration of 20 months. The functional outcome was assessed at regular intervals by Constant score and Disability of the Arm, Shoulder and the Hand (DASH) score for a period of one year. Result There was significant pain relief and improvement in the functional status of patients. The pain relief was significant in the group managed by distal radius volar plate. The decrease in DASH score and increase in Constant score suggests better functional outcomes in these patients. Conclusion Our study highlights the fact that the distal radius volar plate is an excellent alternative to the hook plate in the treatment of unstable lateral third clavicle fractures. The decrease in pain and improved functional outcome stresses the fact that the volar locking plate is the recent most advancement in the fracture fixation of Neer's type ll fractures. The distal radius volar plate is the recent internal fixation technique to manage unstable lateral end clavicle fractures.

The use of Tightrope device as the sole method of fixation in treating lateral end clavicle fractures.

BACKGROUND: Lateral end clavicle fractures can be challenging due to the small and often comminuted lateral fragment, problems with union and stability and implant morbidity. We retrospectively reviewed outcomes of Tightrope device in isolation to treat lateral end clavicle fractures. METHODS: Subjective and objective measures were assessed for 29 patients. The subjective comprised of functional clinical scores: Oxford shoulder score and EuroQoL5D. The objective measures were maintenance of fracture reduction, bone healing and complications. RESULTS: Median age was 36 years and 72% of cases were male patients. Average clinical follow up time was 21 months. Evaluation of latest radiographs showed that all reductions were maintained post-operatively. Twenty-two fractures had united and one patient had established non-union. Functional outcomes showed predominantly good results with Oxford shoulder score average of 41, EuroQoL5D index score of 0.78 and EuroQol Visual Analogue Scale 76. The overall post-operative complication rate was 10%; only one case requiring a secondary procedure. DISCUSSION: In our series, using the Tightrope as the sole device to treat displaced lateral end of clavicle fractures resulted in good radiological and functional outcomes, with minimal complications requiring secondary procedures. We believe the Tightrope device is a good method of fixing these challenging fractures and advocate its use.

Additional coracoclavicular augmentation reduces revision rates in the treatment of lateral clavicle fractures as compared to angle-stable plate osteosynthesis alone.

INTRODUCTION: There is no uniform approach to the management of lateral clavicle fractures. Recent studies have investigated additive coracoclavicular (CC) augmentation as a treatment option; however, it is unclear whether it is superior to conventional locking plate osteosynthesis. METHODS: We carried out a retrospective analysis of 40 patients with lateral clavicle fracture (Neer type IIb) who were treated between 2014 and 2017 with either a hybrid locking plate osteosynthesis/additive arthroscopy-assisted CC augmentation (HP) procedure or a locking plate osteosynthesis only (PO) approach to determine which strategy was more effective. At follow-up, subjective shoulder value, age- and sex-adjusted Constant-Murley score, Taft (TF) score, American Shoulder and Elbow score, Nottingham clavicle score, and Visual Analogue Scale score were compared between patient groups. A radiologic evaluation was also conducted. RESULTS: A total of 14/17 patients (83%; 9 male/5 female, mean age: 43 ± 15 years) were followed up in the PO group. The mean follow-up time was 29 ± 12.4 months. In the HP group, 17/23 patients (74%; 9 male/8 female, mean age: 43 ± 17 years) were followed up, with a mean follow-up time of 18 ± 7.1 months. There were no significant differences in clinical parameters between the HP and PO groups; notably, the shoulder girdle-specific TF score was comparable in the 2 groups (HP: 11.3 ± 1.1 points and PO: 10.9 ± 0.9 points). In the HP group, additional pathologies were identified and arthroscopically treated in 35% of cases. Radiologic examination revealed a significant difference between pre- and postoperative CC distance in the HP group (P = 0.001). CONCLUSION: Additive CC augmentation in combination with locking plate osteosynthesis seems to improve the vertical stability and reduces the revision rate in patients with a lateral clavicle fracture. Furthermore, an arthroscopy-assisted procedure allows for an intraoperative detection and single-step treatment of accompanying intraarticular pathologies.

[Coraco-clavicular loop and tension band suture in type II and type V distal-third clavicle fractures]. / Cerclaje coracoclavicular y banda de tensión con sutura en el tratamiento de fracturas del tercio externo de la clavícula tipos II y V.

Many surgical techniques have been used to address unstable distal third clavicle fractures. Complications and the need for hardware removal are still a concern. We propose a surgical technical using high-strength sutures to restore vertical and horizontal stability in Neer type II and Neer type V distal-third clavicle fractures. It has been used in three cases; two type V and one type II. In all cases, bone healing was achieved uneventfully and all patients resumed their pre-injury activities including sports at sixmonths postoperatively. The coraco-clavicular loop and tension band suture technique is a simple procedure that allows vertical and horizontal stabilization of the fracture. It achieves good clinical results and it may be a costeffective alternative to other techniques although a longer series and longterm followup is required to adequately assess the results.

Se han descrito diferentes técnicas quirúrgicas para el tratamiento de las fracturas inestables del tercio distal de la clavícula. Las complicaciones asociadas y la necesidad de retirar los implantes siguen siendo motivo de preocupación. Proponemos una técnica quirúrgica que utiliza suturas de alta resistencia para restaurar la estabilidad vertical y horizontal en las fracturas del tercio distal de la clavícula de tipo II y V de la clasificación de Neer. Esta técnica se ha utilizado en tres casos; dos de tipo V y uno de tipo II. En todos se obtuvo la consolidación ósea y todos reanudaron sus actividades previas a la lesión, incluyendo actividad deportiva, a los seis meses de la cirugía. La técnica de cerclaje coracoclavicular y banda de tensión con sutura es un procedimiento sencillo que permite la estabilización vertical y horizontal de la fractura. Permite obtener buenos resultados clínicos y puede ser una alternativa coste-efectiva eficaz en el tratamiento de estas lesiones aunque se requiere una serie más larga y un seguimiento a largo plazo para evaluar adecuadamente los resultados.

Comparing the locking screw direction of three locking plates for lateral clavicle fractures: a simulation study.

BACKGROUND: The locking plate is a useful treatment for lateral clavicle fractures, however, there are limits to the fragment size that can be fixed. The current study aimed to measure the screw angles of three locking plates for lateral clavicle fractures. In addition, to assess the number of screws that can be inserted in different fragment sizes, to elucidate the size limits for locking plate fixation. METHODS: The following three locking plates were analyzed: the distal clavicle plate [Acumed, LLC, Oregon, the USA], the LCP clavicle plate lateral extension [Depuy Synthes, LLC, PA, the USA], and the HAI clavicle plate [HOMS Engineering, Inc., Nagano, Japan]. We measured the angles between the most medial and lateral locking screws in the coronal plane and between the most anterior and posterior locking screws in the sagittal plane. A computer simulation was used to position the plates as laterally as possible in ten normal three-dimensional clavicle models. Lateral fragment sizes of 10, 15, 20, 25, and 30 mm were simulated in the acromioclavicular joint, and the number of screws that could be inserted in the lateral fragment was assessed. Subsequently, the area covered by the locking screws on the inferior surface of the clavicle was measured. RESULTS: The distal clavicle plate had relatively large screw angles (20° in the coronal plane and 32° in the sagittal plane). The LCP clavicle lateral extension had a large angle (38°) in the sagittal plane. However, the maximum angle of the HAI clavicle plate was 13° in either plane. The distal clavicle plate allowed most screws to be inserted in each size of bone fragment. For all locking plates, all screws could be inserted in 25 mm fragments. The screws of distal clavicle plate covered the largest area on the inferior surface of the clavicle. CONCLUSIONS: Screw angles and the numbers of screws that could be inserted in the lateral fragment differed among products. Other augmented fixation procedures should be considered for fractures with fragment sizes < 25 mm that cannot be fixed with a sufficient number of screws.

Cerclaje coracoclavicular y banda de tensión con sutura en el tratamiento de fracturas del tercio externo de la clavícula tipos II y V / Coraco-clavicular loop and tension band suture in type II and type V distal-third clavicle fractures

Resumen: Se han descrito diferentes técnicas quirúrgicas para el tratamiento de las fracturas inestables del tercio distal de la clavícula. Las complicaciones asociadas y la necesidad de retirar los implantes siguen siendo motivo de preocupación. Proponemos una técnica quirúrgica que utiliza suturas de alta resistencia para restaurar la estabilidad vertical y horizontal en las fracturas del tercio distal de la clavícula de tipo II y V de la clasificación de Neer. Esta técnica se ha utilizado en tres casos; dos de tipo V y uno de tipo II. En todos se obtuvo la consolidación ósea y todos reanudaron sus actividades previas a la lesión, incluyendo actividad deportiva, a los seis meses de la cirugía. La técnica de cerclaje coracoclavicular y banda de tensión con sutura es un procedimiento sencillo que permite la estabilización vertical y horizontal de la fractura. Permite obtener buenos resultados clínicos y puede ser una alternativa coste-efectiva eficaz en el tratamiento de estas lesiones aunque se requiere una serie más larga y un seguimiento a largo plazo para evaluar adecuadamente los resultados.

Abstract: Many surgical techniques have been used to address unstable distal third clavicle fractures. Complications and the need for hardware removal are still a concern. We propose a surgical technical using high-strength sutures to restore vertical and horizontal stability in Neer type II and Neer type V distal-third clavicle fractures. It has been used in three cases; two type V and one type II. In all cases, bone healing was achieved uneventfully and all patients resumed their pre-injury activities including sports at six-months postoperatively. The coraco-clavicular loop and tension band suture technique is a simple procedure that allows vertical and horizontal stabilization of the fracture. It achieves good clinical results and it may be a cost-effective alternative to other techniques although a longer series and long-term follow-up is required to adequately assess the results.

Posterior Displacement and Angulation of Displaced Lateral Clavicle Fractures: A 3-Dimensional Analysis.

BACKGROUND: The management of lateral clavicle fractures is often challenging because of difficulties in identifying displacement patterns that indicate an unstable fracture. HYPOTHESIS: The aim of this study was to evaluate displacement patterns through analysis using 3-dimensional (3D) rendering software for displaced lateral clavicle fractures. We hypothesized that most displaced lateral clavicle fractures would have posterior displacement and angulation as well as superior displacement of the medial fragment. STUDY DESIGN: Cross-sectional study; Level of evidence, 3. METHODS: Radiographs of 37 displaced lateral clavicle fractures were imported into the 3D rendering software to reconstruct the fracture model. For the computational simulation of fracture reduction, the medial fragment was manipulated and returned into place using the software's moving tools. Two corresponding points were marked between the medial and lateral fragments to measure 3D spatial location in the x-axis (shortening), y-axis (horizontal displacement), and z-axis (vertical displacement). The displacement angle on the cranial view was also measured based on the medial end of the clavicle. RESULTS: There were 32 cases (86.5%) of superior displacement of the medial fragment (mean, 5.8 mm; range, -6.5 to 19.0 mm), 35 cases (94.6%) of posterior displacement of the medial fracture fragment (mean, 8.8 mm; range, -3.2 to 18.3 mm), and 23 cases (62.2%) of distraction of the fracture site (mean, 2.1 mm; range, -9.2 to 12.2 mm). All 37 patients revealed posterior angulation of the fracture site (mean, 8.9°; range, 2.2°-39.4°). CONCLUSION: Most displaced lateral clavicle fractures have posterior displacement and angulation as well as superior displacement of the medial fragment. Our results revealed that 3D evaluation of lateral clavicle fracture displacement patterns is useful for assessing fracture stability and making treatment decisions.

Inter- and intraobserver agreement of three classification systems for lateral clavicle fractures - reliability comparison between two specialist groups.

BACKGROUND: Although of great value in the management of lateral clavicle fractures, substantial variation in their classification exists. We performed a retrospective study to address the inter- and intraobserver reliability of three different classification systems for lateral clavicle fractures. METHODS: Radiographs of 20 lateral clavicle fractures that represented a full spectrum of adult fracture patterns were graded by five experienced radiologists and five experienced trauma surgeons according to the Orthopaedic Trauma Association (OTA), the Neer, and the Jäger/Breitner classification systems. This evaluation was performed at two different time points separated by 3 months. To measure the observer agreement, the Fleiss kappa coefficient (κ) was applied and assessed according to the grading of Landis and Koch. RESULTS: The overall interobserver reliability showed a fair agreement in all three classification systems. For the OTA classification system, the interobserver agreement showed a mean kappa value of 0.338 ranging from 0.350 (radiologists) to 0.374 (trauma surgeons). Kappa values of the interobserver agreement for the Neer classification system ranged from 0.238 (trauma surgeons) to 0.276 (radiologists) with a mean κ of 0.278. The Jäger/Breitner classification system demonstrated a mean kappa value of 0.330 ranging from 0.306 (trauma surgeons) to 0.382 (radiologists).The overall intraobserver reliability was moderate for the OTA and the Jäger/Breitner classification systems, while the overall intraobserver reliability for the Neer classification system was fair.The kappa values of the intraobserver agreements showed, in all classification systems, a wide range with the OTA classification system ranging from 0.086 to 0.634, the Neer classification system ranging from 0.137 to 0.448, and a range from 0.154 to 0.625 of the Jäger/Breitner classification system. CONCLUSIONS: The low inter- and intraobserver agreement levels exhibited in all three classification systems by both specialist groups suggest that the tested lateral clavicle fracture classification systems are unreliable and, therefore, of limited value. We should recognize there is considerable inconsistency in how physicians classify lateral clavicle fractures and therefore any conclusions based on these classifications should be recognized as being somewhat subjective.

Current concepts in the management of clavicle fractures.

Clavicle fractures comprise approximately 3% of all adult fractures and there is evidence that the incidence is increasing. Fractures of the lateral and middle third of the clavicle present distinct challenges in both surgical fixation techniques and clinical outcome, as such they should be recognised as separate clinical entities. Despite conflicting evidence, most studies indicate that superior clinical results are found in patients with united clavicle fractures rather than those that go onto non-union. Furthermore there is level-1 evidence that operative treatment of clavicle fractures leads to significantly increased rates of union. Despite these findings, significant controversy still exists on which patients would benefit from primary fixation and those who could successfully be managed non-operatively. We present an evidence-based review of clavicle fracture management including surgical indications, techniques, and results.