ABSTRACT
An accurate, economic and green methodology for Pb(II) monitoring in bee products is proposed. Complexed metal traces were preconcentrated on Nylon membranes using the coacervation phenomenon based on room temperature reaction between the cationic surfactant hexadecyltrimethylammonium bromide and the bile salt sodium cholate. The increase in solid surface fluorescence signal of dyes 8-hydroxyquinoleine and o-phenanthroline due to Pb(II) presence was used for the metal quantification. Experimental variables that influence on preconcentration step and fluorimetric sensitivity were optimized using uni-varied assays. Pb(II) concentration was determined on membranes by solid surface fluorescence at λem = 470 nm (λexc = 445 nm), using a solid sample holder. The calibration at optimal experimental conditions showed a LOD of 4.2 × 10-4 mg Kg-1 with a linear range of 1.28 × 10-3 mg Kg-1 to 8.73 mg Kg-1 and was successfully applied to Pb(II) quantification in different bee products produced in central west region of Argentina. The proposed methodology was applied to all samples after appropriate dilution. Accuracy methodology was evaluated by comparison of the obtained results with those found by ICP-MS, with percentage relative error under 8%. The precision was better than 0.0344 CV for Pb(II) determination.
ABSTRACT
Heavy traces metals may be present in honey being their detection very important for the quality control and it also serves as an indicator of environmental pollution. A new methodology for lead traces determination has been developed based on the quenching effect of the metal on fluorescent emission of 8-hydroxyquinoline and o-phenanthroline at λemâ¯=â¯360â¯nm (λexcâ¯=â¯250â¯nm). Experimental variables that influence on fluorimetric sensitivity were optimized by uni-variation assays. The calibration graph using zeroth order regression was linear from 0.105⯵gâ¯L-1 to 51.8⯵gâ¯L-1, with correlation coefficient better than 0.998. Under the optimal conditions, the limits of detection and quantification were of 0.035⯵gâ¯L-1 and 0.105⯵gâ¯L-1, respectively. The trueness of the methodology was assessed trough parallel samples analysis by ICP-MS. The proposed method showed good sensitivity, adequate selectivity with good tolerance to foreign ions, and was applied to the determination of lead trace amounts in honey from San Luis city (Argentina) with satisfactory results.
Subject(s)
Fluorometry/methods , Lead/analysis , Cross-Sectional Studies , Honey/analysis , Hydrogen-Ion Concentration , Limit of Detection , Oxyquinoline/chemistry , Phenanthrolines/chemistry , Reproducibility of ResultsABSTRACT
A new environmental friendly methodology based on fluorescent signal enhancement of rhodamine B dye is proposed for Pb(II) traces quantification using a preconcentration step based on the coacervation phenomenon. A cationic surfactant (cetyltrimethylammonium bromide, CTAB) and potassium iodine were chosen for this aim. The coacervate phase was collected on a filter paper disk and the solid surface fluorescence signal was determined in a spectrofluorometer. Experimental variables that influence on preconcentration step and fluorimetric sensitivity have been optimized using uni-variation assays. The calibration graph using zero th order regression was linear from 7.4×10(-4) to 3.4 µg L(-1) with a correlation coefficient of 0.999. Under the optimal conditions, a limit of detection of 2.2×10(-4) µg L(-1) and a limit of quantification of 7.4×10(-4) µg L(-1) were obtained. The method showed good sensitivity, adequate selectivity with good tolerance to foreign ions, and was applied to the determination of trace amounts of Pb(II) in refill solutions for e-cigarettes with satisfactory results validated by ICP-MS. The proposed method represents an innovative application of coacervation processes and of paper filters to solid surface fluorescence methodology.