Evaluation of the mechanical behaviour of the expandable wedge locked nail fixation in retrograde use: A finite element study.

INTRODUCTION: In literature, there have been many studies conducted to research the alternatives of standard interlocking intramedullary nailing. The expandable wedge locked nail fixation, which is thought as a new alternative to the standard interlocking nailing, has been presented in previous numerical studies. The antegrade usage of the wedge locked nail fixation has provided promising results. From this point, the aim of the study is to evaluate mechanical behavior of its retrograde usage on femur models. Additionally, another aim of the study is to investigate the effect of fracture level on mechanical properties of the fixation. MATERIALS AND METHODS: The mechanical behaviors of the wedge locked nail and standard interlocking nail fixations were compared by finite element methods. Sawbones femurs having osteotomies at five different levels to simulate different fractures were fixed with wedge locked nail or interlocking nail by using retrograde approach. With respect to the fracture level, two different nail lengths were used. Axial compression load was applied to fixations. The mechanical behaviors of the fixations were evaluated with respect to stiffness of the fixations and stresses occurred on both implants and bones. RESULTS: Any of the wedge locked nail fixation did not slip at canal. The stress and stiffness results were mostly close with each other for both nail types. The maximum stresses at locking elements or bones contacting these elements increased with decreased distance between the fracture and relevant locking elements. DISCUSSION: The wedge locked nail fixation showed comparable results to the standard interlocking nail fixation with respect to the stiffness and stress. Under axial loading, wedge locked nail provided a secured fixation without any slippage and preserved its position inside the medullary canal. It may be thought as a safe alternative to the standard interlocking nail fixation for retrograde usage. Additionally, according to stress results, it is advised to the surgeons to avoid a close locking to the fracture line.

Minimally invasive bilateral fixed angle locking fixation of the dorsal pelvic ring: clinical proof of concept and preliminary treatment results.

PURPOSE: Dorsal pelvic ring fractures may result from high energy trauma in younger patients or from osteoporosis as fragility fractures in elderly patients. To date, no strong consensus exists on the best surgical technique to treat posterior pelvic ring injuries. The aim of this study was to evaluate the surgical performance of a new implant for angle-stable fixation of the posterior pelvic ring and patient outcome. METHODS: In a prospective pilot study, 27 patients (age: 39-87 years) with posterior pelvic ring fractures classified according to the AO classification (n = 5) or to the fragility fractures of the pelvis (FFP) classification (n = 22) were treated using the new implant. During a follow-up period of 1 year, surgical parameters of the implantation technique, complication rate, morbidity, mortality, preservation of patient mobility, and social independence were evaluated. RESULTS: No implant misplacement or failure was observed. Two patients developed symptomatic spinal canal stenosis at L4/L5 following mobilization. MRI diagnosis proved the implant was not responsible for the symptoms. In one case, an additional plate stabilization of a pubic ramus fracture was necessary 6 months later. There was no inpatient mortality. One patient died due to her underlying oncological disease within the first 3 months. The main outcome parameters were pain, mobility, preservation of independent living and employment. CONCLUSION: Operative instrumentation of dorsal pelvic ring fractures should be stable enough to allow for immediate weight bearing. The new locking nail implant offers percutaneous reduction and fixation options and may decrease the generally observed rate of complications. TRAIL REGISTRATION: German Clinical Trials Register ID: DRKS00023797, date of registration: 07.12.2020.

Mechanical comparison of standard interlocking, clawed, and expandable wedge locked nail fixations: An experimental and numerical study.

INTRODUCTION: Intramedullary nailing has been used as a standard in the treatment of the long bone fractures with its clinical and mechanical advantages. However, using distal locking screws has been associated with longer operative times, higher radiation exposure rates, and complications like breakages of distal screw or nail at the screw hole level. Therefore, attempts to eliminate distal locking screws has been always present for intramedullary nail fixation. With a similar purpose, the present study has been carried out to compare mechanical behaviors of intramedullary nail fixations with different distal locking elements. MATERIALS AND METHODS: In this study, mechanical behaviors of standard interlocking and clawed nail fixations were compared experimentally in the first part. Six fourth generation Sawbones femurs, which have a simulated subtrochanteric fracture, were divided equally and were fixed with standard interlocking and clawed nails. During axial compression tests, experimental strain measurements were taken from all fixations. After validation of numerical models with using experimental strains and stiffnesses, mechanical behaviors of standard interlocking, clawed, and wedge locked nail fixations were compared numerically under axial compression loads. In numerical comparison, the stress-strain distributions were evaluated. RESULTS: Experimental results showed that although that there was no significant difference in stiffnesses, standard nail fixation bore two times higher loads than clawed nail fixations. Under loading, decrease in the distance between fracture surfaces was approximately seven times higher in the clawed nail fixation when compared to standard nail fixations. Numerical results showed that wedge locked nail fixation provided equivalent mechanical behavior to standard interlocking nail. DISCUSSION: In experiments of clawed nail fixation, the high decrease in the distance between fracture surfaces was evidence of the slippage of nail in the medullary canal. For a safe fixation, claws should be deployed when they are completely in contact with the cortical bone, they should be stuck into the bone in a fair amount, and the deployment in the distal third of the femur should be avoided. According to experimentally validated numerical analyses, wedge locked nail fixation may be an alternative for standard interlocking nail fixation if experimental studies support the present results.

Antegrade intramedullary locking nail in the management of proximal and middle thirds of humeral diaphyseal fractures.

PURPOSE: The aim of the study was to evaluate the antegrade intramedullary locking nail osteosynthesis for the treatment of the proximal and middle thirds of humeral shaft fractures. METHODS: A retrospective study was made on 218 patients diagnosed with humeral diaphysis fractures who undergo surgery with antegrade intramedullary locking nail between January 2017 and December 2021. The clinical follow-up started two days after surgery and continued at one month, three months, six months and one year. The functional recovery evaluation was performed using visual analogue scale (VAS) score, Rating Scale of American Shoulder and Elbow Surgeons Form (ASES), Mayo Elbow Performance Score System (MEPS) and rate of complications. RESULTS: Low intra-operative blood loss, short operation time, short hospitalisation, early mobilisation of the patient and high union rate imposed intramedullary nailing as a standard procedure for the treatment of proximal and middle thirds of humeral diaphyseal fractures in the past years, and the union rate was 99.5%. VAS score evaluated at one month, three months and six months indicated a very good overall post-operative experience. The ASES and MEPS score were evaluated at six months and one year and showed excellent results. All the patients (except 1 case) were able to return to their previous jobs within six months. CONCLUSION: Humeral nailing is associated with early return to function of the upper limb, with very good clinical and functional outcomes of the shoulder and elbow. This method could be considered the best surgical option for the management of proximal middle humeral fractures.

Fractura compleja del húmero asociada a parálisis radial / Complex Fracture of the Humerus Associated with Radial Paralysis

Las fracturas de la diáfisis humeral son lesiones que se producen con frecuencia como parte de caídas o de accidentes de alta energía y se asocian con parálisis del nervio radial. Se presenta paciente de 43 años de edad, masculino, que sufre accidente automovilístico que le produce fractura diafisaria del húmero derecho multifragmentaria, por lo cual se le realiza reducción cerrada y osteosíntesis con clavo intramedular acerrojado y tratamiento conservador para la parálisis radial. La evolución fue satisfactoria, el paciente se recuperó de la parálisis a los 4 meses y logró la consolidación completa a los 5 meses. Tras un año de evolución no presenta dolor en el hombro, y tiene movilidad completa del hombro, muñeca y dedos a la extensión(AU)

Diaphyseal fracture of humerus are frequent lesions, resulting from falls or high energy accidents; they are associated to radial nerve palsy. We report the case of a 43 years old male patient, who suffered a multifragment diaphyseal fracture of his right humerus, as a result of a car accident. He underwent a closed reduction and osteosynthesis using a locking intramedullary nail for the radial paralysis. His evolution was satisfactory; this patient recovered from the paralysis after four months and he managed full consolidation five months later. After a year, he did not have any pain in his shoulder, he has full mobility of his shoulder, wrist and fingers when extendind(AU)

Numerical evaluation of the mechanical properties of a novel expandable intramedullary nailing: A new alternative to standard interlocking nailing.

INTRODUCTION: There has been a great effort in preventing the disadvantages of distal locking in intramedullary nailing to date. From this scope, a novel expandable nail fixation eliminating distal locking screws has been designed. The primary aim of this numerical parametric study is to investigate mechanical behavior of expandable nail fixation on the fractured femur model under different contact parameters which are effective in maintaining the nail position and to specify the appropriate values of these contact parameters for a safe fixation. The second aim is to compare mechanical behavior of the expandable nail fixation with the standard interlocking nail fixation. MATERIALS AND METHODS: The expandable nail has three wedges which are responsible for distal fixation by compressing the medullary canal in the radial direction. 4th generation Sawbones femur model was used as bone model. A transverse osteotomy with 20 mm gap was created to simulate a subtrochanteric fracture. The fixations have been examined under axial compression with 1200 N and torsion with 7 Nm. In the parametric study, the tightening torque and static friction coefficient in wedge-canal contact were selected as contact parameters. The outputs were stiffnesses of the fixations, equivalent von-Mises stress distribution on the models, and load sharing between the canal and distal locking elements. RESULTS: The results of the parametric study showed that the model with the tightening torque of 3 Nm and friction coefficient of 0.7 was the safest. The load borne by wedges is generally prone to increase with increased tightening torque and friction coefficient. The both fixations showed close stiffness and stress values. CONCLUSION: The tightening torque of the wedge locking mechanism is directly effective in maintaining the nail position constant in canal, and the safety of the fixation is better ensured with increased tightening torque but stress states on bone must be carefully evaluated. The expandable nail provided comparable results to standard interlocking nails with respect to the fixation stiffness, stress, and contact forces. The expandable nailing may be evaluated as an alternative in the fractures of long bones in the case that the numerical results are supported by future experimental studies.

Short-term results of a novel management of supracondylar fracture with coexisting osteoarthritis with bifold fixation and total knee arthroplasty.

PURPOSE: Presence of supracondylar and periarticular femoral fracture with associated arthritis of knee poses a challenging situation to the orthopaedic surgeon. The results of fixation of fracture in osteoporosis are not very satisfactory and have complications. With fixation alone, they still cannot bear weight on affected leg due to severe disability of osteoarthritis. To make patient walk, conventionally three surgeries in the form of fracture fixation, removal of implant and total knee arthroplasty (TKA) needs to be done in staged manner. We propose a novel management in form of bifold fixation and simultaneous TKA. METHODS: Eight cases (6 females, 2 males) of supracondylar femoral fractures with severe osteoarthritis of the knee and osteoporosis were primarily fixed with bifold fixation using SIGN nail ( www.signfracturecare.org ) and locking plate together with simultaneous total knee arthroplasty. There were five cases (2 males and 3 females) of grade 4 (Kellgren-Lawrence grading) osteoarthritis (OA) and three cases (all females) of severe rheumatoid arthritis (RA). RESULTS: The mean age was 68 years and average time for full weight bearing was 6 days. Radiographic evidence of fracture union was achieved in 16.25 weeks. The mean Knee Society Score (KSS) and Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC) score at 26 months was 83.13 and 22.13 respectively. CONCLUSIONS: Single stage combined bifold osteosynthesis with interlocking nail and locking plate together with total knee arthroplasty helps in one time management of these difficult injuries. It is a cost-effective and economically sound option and gives excellent results with good patient satisfaction.

Comparison between osteosynthesis with interlocking nail and minimally invasive plating for proximal- and middle-thirds of humeral shaft fractures.

PURPOSE: Options for the treatment of proximal- and middle-thirds of humeral shaft fractures include intramedullary interlocking nail (IMN) and minimally invasive plate osteosynthesis (MIPO). However, whether IMN provides better clinical outcomes than MIPO surgical technique still remains unclear. This study was designed to compare clinical outcomes of the IMN with MIPO technique for the treatment of proximal- and middle-thirds of humeral shaft fractures. METHOD: A retrospective cohort analysis of 55 proximal- and middle-thirds of humeral shaft fractures surgically treated using IMN (n = 25) or MIPO (n = 30) from January 2012 to January 2016. Peri-operative and follow-up data (a minimum of 1 year) of the patients (aged from 18 to 56 years) were collected. Operative time, union time, VAS scores, surgery-related complications, and implant removal rate were compared between the two groups in this study. Besides, the functional outcomes were evaluated using the Rating Scale of American Shoulder and Elbow Surgeons' Form (ASES) and Mayo Elbow Performance Score System (MEPS). RESULT: We found significantly shorter operative time and much less blood loss in IMN group, and lower VAS scores in the IMN group after surgery at first and third months but not at the sixth month. Complication rate was found to be relatively higher in the MIPO group when compared to the IMN group. No significant difference was observed between these two groups regarding ASES and MEPS scores. Three patients in the MIPO group suffered iatrogenic radial nerve injury and recovered after four to five months later. No implant failures occurred in either group. CONCLUSION: Intramedullary interlocking nail seemed to be superior to minimally invasive plate osteosynthesis in the treatment of proximal- and middle-thirds of humeral shaft fractures due to shorter operative time and union time, less early post-operative pain, and fewer complications. The intramedullary interlocking nail could be considered a better surgical option for the management of proximal middle humeral fractures, though it may also depend on the surgeons' skills and learning curve. Further in-depth prospective studies are in great need to verify our conclusion.

Surgical management of proximal femoral metastasis: Fixation or hip replacement? A 309 case series.

INTRODUCTION: The proximal femur is the most frequent operative site for metastasis, but there is no consensus between internal fixation and hip replacement. The present multicenter retrospective observational study sought: (1) to compare early clinical results between internal fixation and hip replacement for proximal femoral metastasis (PFM), and (2) to assess events affecting survival. HYPOTHESIS: The study hypothesis was that internal fixation and hip replacement give comparable clinical results, operative site complications rates and survival. MATERIAL AND METHODS: The series comprised 309 cases, 10 of which were bilateral, in 182 females and 117 males, with a mean age of 67.2±11.5 years and 62.5±13.2 years, respectively. Primaries were mainly breast (118; 38.2%), lung (85; 25.5%) or kidney (40; 12.9%). PFM was revelatory in 114 cases (36.9%). There was visceral involvement in 142 patients (46%), multiple peripheral bone involvement in 212 (68.6%), and spinal involvement in 134 (43.4%). There were 124 pathologic fractures (40%), 51 of which were revelatory. Metastases were cervicocephalic in 135 cases (43.7%), metaphyseal in 166 (53.7%) and both in 8 (2.6%). PFM was osteolytic in 90% of cases, managed by hip replacement in 161 cases and internal fixation in 148 (12 screwed plates, 136 nails). Seventy-seven patients had postoperative radiation therapy. RESULTS: After hip replacement (n=144), walking was normal in 35 cases (24.3%), impaired but unassisted in 53 (36.8%), with 1 forearm crutch in 24 (16.6%), 2 crutches or a frame in 26 (18%), and impossible in 6 (4.1%). After nailing (n=125), results were respectively 38 (30.4%), 47 (37.6%), 15 (12%), 18 (14.4) and 7 (5.6%). Recovery of normal walking capacity did not significantly differ according to technique (p=0.162); nor did pain or function. Recovery of normal walking capacity was better after preventive surgery (p<0.001). Perioperative complications comprised: 10 cases of severe blood loss, 7 pulmonary embolisms, 6 digestive hemorrhages, and 5 lung infections. Secondarily, there were 11 infections (7 after hip replacement, 2 after nailing, 2 after plate fixation), 7 progressive osteolyses and 5 fractures. Complications rates were significantly higher with plate fixation, with no difference between nailing and hip replacement. Survival did not significantly differ between hip replacement (12 months [95% CI: 7-19]), nailing (7 months [95% CI: 6-11]) and plate fixation (16 months [95% CI: 6-not calculable]). CONCLUSIONS: Clinical results and survival were comparable between hip replacement and nailing, confirming the study hypothesis, in agreement with the literature. Each technique has its indications. Patients with severely impaired walking capacity benefited greatly from surgery. The importance of preventive surgery was highlighted. LEVEL OF EVIDENCE: IV, retrospective study.

Three-dimensional computed tomography analysis and functional results of calcaneal fractures treated by an intramedullary nail.

BACKGROUND: Intramedullary calcaneal nailing is used to treat displaced intra-articular calcaneal fractures. The main goal of the study was to assess the reduction of tomography and secondary goals were patient functional scores and complication rates. METHODS: The functional outcome and restoration of the radiographic parameters were evaluated post-operatively, at three months, at one year, and at the last follow-up. The morphology of the posterior facet was evaluated post-operatively, at one year and at the last follow-up by CTs. RESULTS: Twenty-six patients were included. The mean follow-up was 2.8 years. The mean AOFAS-AHS was 79 at the last follow-up. The mean calcaneal height index and length rose respectively from 0.44 to 0.86 and 83 to 87 mm, and the width decreased from 50 to 46 mm. CONCLUSION: The radiographic parameters were restored. The AOFAS-AHS was comparable with other series. This study confirms the efficiency of this procedure with lower rate of complications.

Surgical treatment of displaced intraarticular calcaneal fractures by a minimally invasive technique using a locking nail: A preliminary study.

BACKGROUND: The aim of this retrospective study was to evaluate the outcome of patients with intra-articular calcaneal fractures treated using a minimally invasive locking nail (Calcanail®). METHODS: Between January 2016 and April 2017, 15 patients (9 men and 6 women) with a calcaneal fracture were consecutively treated with Calcanail®. The Böhler angle was recorded on standard X-rays pre- and post-operatively. The articular reduction of the posterior facet was evaluated with the Goldzak index in a CT scan 3 months post-operatively. The mean age of the patients was 53 years (range, 24-78). Mean final follow-up was 18 months (range, 12-24). RESULTS: Six fractures were classified as Sanders II, 7 as Sanders III and 2 as Sanders IV. In 13 out of the 15 patients treated, the post-operative Böhler angle was of more than 20°. Goldzak index was deemed as excellent in 73.5% of the cases (11 patients), good in 20% of cases (3 patients), and poor in 6.5% (1 patient). Post-operative mean AOFAS score was 85 (range, 60-96). CONCLUSIONS: The Calcanail® provides good restoration of the subtalar joint and the calcaneal angles with the advantages of a minimally invasive approach. It was effectively used in Sanders types II and III, even in the presence of poor cutaneous conditions.

Displaced humeral surgical neck fractures: classification and results of third-generation percutaneous intramedullary nailing.

BACKGROUND: The high rates of complications and reoperations observed with the early designs of first-generation (unlocked) and second-generation (bent design) humeral intramedullary nail (IMNs) have discouraged their use by most surgeons. The purpose of this study was to report the results of a third-generation (straight, locking, low-profile, tuberosity-based fixation) IMN, inserted through a percutaneous approach, for the treatment of displaced 2-part surgical neck fractures. METHODS: We performed a retrospective review of 41 patients who underwent placement of a third-generation IMN to treat a displaced 2-part surgical neck fracture (AO/OTA type 11A3). The mean age at surgery was 57 years (range, 17-84 years). After percutaneous insertion through the humeral head, the IMN was used as a reduction tool. Static locking fixation was achieved after axial fracture compression ("back-slap" hammering technique). Patients were reviewed and underwent radiography with a minimum of 1 year of follow-up; the mean follow-up period was 26 months (range, 12-53 months). RESULTS: Preoperatively, 3 types of surgical neck fractures were observed: with valgus head deformity (Type A = 8 cases), shaft translation without head deformity (Type B = 19 cases), or with varus head deformity (Type C = 14 cases). At final follow-up, all fractures went on to union, and the mean humeral neck-shaft angle was 132° ± 5°. We observed 2 malunions and 1 case of partial humeral head avascular necrosis. No cases underwent screw migration or intra-articular penetration. At last review, mean active forward elevation was 146° (range, 90°-180°) and mean external rotation was 50° (range, 20°-80°). The mean Constant-Murley score and Subjective Shoulder Value were 71 (range, 43-95) and 80% (range, 50%-100%), respectively. CONCLUSIONS: Antegrade insertion of a third-generation IMN through a percutaneous approach provides a high rate of fracture healing, excellent clinical outcome scores, and a low rate of complications. No morbidity related to the passage of the nail through the supraspinatus muscle and the cartilage was observed. The proposed A, B, and C classification allows choosing the optimal entry point for intramedullary nailing.

Electromagnetic distal targeting system does not reduce the overall operative time of the intramedullary nailing for humeral shaft fractures.

INTRODUCTION: We aimed to evaluate the efficacy of the use of the electromagnetic distal targeting system in treating humeral shaft fracture. METHODS: Patients were divided in: Group 1) patients that received a distal locking screw placement following the free-hand technique; Group 2) patients in which the distal locking screw was performed using the SURESHOT device. RESULTS: No differences were noted comparing Group 1 (freehand) [71,9 range 40-135 min] to Group 2 (SURESHOT)[70, range 25-125 min]. CONCLUSION: The use of the EM distal targeting system doesn't reduce the overall operative time of the humeral shaft fracture fixation using IMN.

Metacarpal Locked Intramedullary Nail: Surgical Technique and Preliminary Outcome Report.

In surgically indicated metacarpal fractures, the ideal fixation should provide an ample stability for early rehabilitation. Damage to surrounding tissue should be minimized as well, to prevent stiffness which determine the outcomes. We have created the metacarpal locked intramedullary nail (MCLN) that allows immediate motion even in unstable fractures. This preliminary report is objected to demonstrate the surgical technique and outcomes of novel metacarpal fixation. Three surgical indicated metacarpal fractures were treated by MCLN. Unlimited motion was started a day after surgery without external immobilization. Clinical and radiographic control were performed up to two years after the surgery. All of patients returned to previous level of daily activities within six weeks with minimal scar. All fractures were united. The total active motions were above 260° in every patient. Complications were not observed. With this encouraged clinical results, the MCLN could be the promising alternative surgical fixation for metacarpal shaft fractures.

Reduction and internal fixation of displaced intra-articular calcaneal fractures with a locking nail: a prospective study of sixty nine cases.

PURPOSE: The best treatment for intra-articular fractures of the calcaneus is still debated. The aims of this study were to determine whether intrafocal reduction of thalamic fractures is effective, to evaluate whether a locking nail is able to maintain reduction of the articular surface and to analyse the functional results of this original method. METHODS: This prospective study assessed 69 fractures treated with a locking fracture nail in 63 cases and with primary subtalar fusion in six (Calcanail (®), FH). Articular congruity and global reduction of the calcaneus was assessed in all patients by computed tomography (CT) scan three months postoperatively. Functional results were evaluated according to the American Orthopaedic Foot and Ankle Society Ankle-Hindfoot Score (AOFAS-AHS) and all complications recorded. RESULTS: For the 63 fracture nails, the average AOFAS score was 85.9 at a mean final follow-up of 12 months. Only three secondary fusions were performed. For the six comminuted fractures requiring primary fusion, the average AOFAS score was 75.9 at the last follow-up. CONCLUSIONS: The posterior intrafocal approach for both reduction and locked nailing of intra-articular calcaneal fractures has been proven as an effective and reliable procedure.

Subtrochanteric Fractures: Comparison of Proximal Femur Locking Plate and Intramedullary Locking Nail Fixation Outcome.

Fixation of subtrochanteric fracture, even for experienced surgeons, is a challenge. This fracture is most difficult to treat, and the incidence of complications in this type of fracture is higher. This study compared surgical results of two methods, proximal femur locking compression plate and intramedullary locking nail. This is an analytic study, performed on all patients with subtrochanteric fracture who were referred to the hospital during 3 years. They were treated with proximal femur locking plate or intramedullary locking nail. The postoperative complications were evaluated and recorded. Finally, the data were analyzed by SPSS software. Complications were studied in both groups. Neither treatment has statistically significant difference in complications, onset of complications incidence, and time of full-weight bearing. Although the Harris Hip Score among patients improved in both methods of treatment, there is no significant difference between the two groups. The results of subtrochanteric fracture fixation by intramedullary or locking plate were similar and had the same outcome.

Clinical Outcomes of the Tibia Segmental Fractures Treated by Intramedullary Nail Using Various Reduction Techniques

PURPOSE: We evaluated the clinical outcomes of tibia segmental fractures treated by intramedullary nailing using various reduction techniques. MATERIALS AND METHODS: From January 2003 to June 2009, 18 segmental tibial fracture patients treated by intramedullary nail were enrolled with a minimum 12-month follow-up. The mean follow-up was 38 months (range 15-72). According to the AO classification, the fractures were types 42C2.1, 42C2.2, and 42C2.3 in four, ten, and four patients, respectively. Ten fractures were closed and eight were open. We used various techniques for reduction during operation and investigated bone union time and complication (non-union, malunion etc.). RESULTS: Bone grafting was performed in three patients. Complete union was achieved in all patients. The mean time for union was 16.3 weeks (range 12-21), except in three delayed union patients. All radiological evaluations showed good alignment (less than 5 degree) except in two patients; and the mean deformity angle was 2.2 degree. Knee range of motion (ROM) was 129 degree, and ankle ROM was 68 degree. Local wound infection occurred in two patients. CONCLUSION: Intramedullary nailing is a successful method in the acute management of segmental tibial fractures, if accompanied by appropriate reduction technique.

Expandable self-locking nail in the management of closed diaphyseal fractures of femur and tibia.

BACKGROUND: Intramedullary fixation is the treatment of choice for closed diaphyseal fractures of femur and tibia. The axial and rotational stability of conventional interlocking nails depends primarily on locking screws. This method uses increased operating time and increased radiation exposure. An intramedullary implant that can minimize these disadvantages is obviously better. Expandable intramedullary nail does not rely on interlocking screws and achieves axial and rotational stability on hydraulic expansion of the nail. We analyzed 32 simple fractures of shaft of femur and tibia treated by self-locking expandable nail. MATERIALS AND METHODS: Intramedullary fixation was done by using self-locking, expandable nail in 32 patients of closed diaphyseal fractures of tibia (n = 10) and femur (n = 22). The various modes of injury were road traffic accidents (n = 21), fall from height (n = 8), simple fall (n = 2), and pathological fracture (n = 1). Among femoral diaphyseal fractures 16 were males and six females, average age being 33 yrs (range, 18- 62 yrs). Seventeen patients had AO type A (A1 (n = 3), A2 (n = 4), A3 (n = 10)) and 5 patients had AO type B (B1 (n = 2), B2 (n = 2), B3 (n = 1)) fractures. Eight patients having tibial diaphyseal fractures were males and two were females; average age was 29.2 (range, 18- 55 yrs). Seven were AO type A (A1 (n = 2), A2 (n = 3), A3 (n = 2)) and three were AO type B (B1 (n = 1), B2 (n = 1), and B3 (n = 1)). We performed closed (n = 27) or open reduction (n = 5) and internal fixation with expandable nail to stabilize these fractures. The total radiation exposure during surgery was less as no locking screws were required. Early mobilisation and weight-bearing was started depending on fracture personality and evidences of healing. Absence of localised tenderness and pain on walking was considered clinical criteria for union, radiographic criteria of union being continuity in at least in three cortices in both AP and lateral views. Patients were followed for at least one year. RESULTS: The average operative time was 90 min (range, 55-125 min) for femoral fractures and 53 min (range, 25-115 min) for tibial fractures. Radiation exposure was minimum, average being 84 seconds (range, 54-132) for femoral fractures and 54 seconds (range, 36-78) for tibial fractures. All fractures healed, but few had complications, such as infection (one case with tibial fracture) bent femoral nail with malunion (n = 1), and delayed union (n = 3; 2 cases in femur and 1 case in tibia). Mean time of union was 5.1 months (range, 4-10(1/2) months) for femoral fractures and 4.8 months (range, 3-9 months) for tibial fractures. CONCLUSION: We found the nail very easy to use with effective fixation in AO type A and B fractures in our setting. Less surgical time is required with minimum complications. The main advantage of the expandable nail is that if affords. satisfactory axial, rotatory, and bending stability with decreased radiation exposure to operating staff and the patient.

The treatment of established non-union of the proximal humerus using the Polarus locking intramedullary nail.

INTRODUCTION: Non-union following fracture of the proximal humerus is not uncommon, particularly in the elderly. This can be associated with significant morbidity due to pain, instability and functional impairment. The Polarus device (Acumed) is a locked, antegrade intramedullary nail designed to stabilize displaced 2-, 3- and 4-part fractures of the proximal humerus. We report our experience with the Polarus nail for the treatment of established non-union of the proximal humerus. MATERIALS AND METHODS: A total of 7 Polarus nails were inserted for the treatment of non-union of the proximal humerus between June 2000 and July 2007. Each fracture site was opened, debrided, stabilized with a Polarus nail and then grafted with autologous cancellous iliac crest bone. The time between injury and surgery ranged from 6 to 102 months. One patient had undergone previous fixation of her fracture using Rush intramedullary rods. All patients were females, and mean age at surgery was 63.6 years (range, 49-78 years). A retrospective review of notes and radiographs was carried out. Patients were reviewed at varying intervals postoperatively (range, 13-68 months) and assessed using the Constant shoulder-scoring system. RESULTS: All un-united fractures progressed to union. There were no wound complications and no postoperative nerve palsies. Functional outcome was good, even in those cases with a long interval between injury and surgery. The mean Constant score was 63 (range, 54-81). Migration of a single proximal locking screw was seen in 2 patients, and these screws required removal at 5 and 12 months, respectively, postoperatively. CONCLUSION: In our experience, a locked proximal humeral nail used in conjunction with autologous bone grafting is an excellent device for the treatment of proximal humerus non-unions.

Biology and Biomechanics in Osteosynthesis of Proximal Humerus Fractures.

Surgical treatment of proximal humeral fractures still remains a challenge. This is primarily due to the fact that sufficient implant fixation in humeral head fractures is often not achieved due to substantial bone tissue loss with increasing age. In the last few years the locking plates and locking nails have been introduced into clinical practice with varying results. The biomechanical studies have focused on locking plate osteosynthesis as well. The following paper focuses on bone quality, biomechanical studies and biology of proper osteosynthesis and reviews the most recent literature.