Three-dimensional morphometric and volumetric analysis of maxillary sinuses.

BACKGROUND: The maxillary sinus is a pyramid-shaped cavity with varying shapes, sizes, and capacities. Its dimensions grow gradually and develop until early adulthood. Anatomical knowledge of the maxillary sinus is essential to understanding sinonasal disorders, planning surgical procedures and preventing complications. Awareness of the sinus's proximity to critical structures helps avoid injuries during surgery. The European, Korean, and Sri Lankan population study parameters show varying results and do not necessarily apply to the Indian population. The standard morphometric data of the maxillary sinus is scanty in the Indian population. The study aimed to determine the volume and morphometry of the maxillary sinus along with gender differences in the Eastern population of the Indian. MATERIALS AND METHODS: A retrospective cross-sectional study was conducted using cone beam computed tomography data of maxillary sinuses of 100 normal individuals. The data were analysed after the three-dimensional reconstruction of digital imaging and communications in medicine (DICOM) images with the help of DICOM to print and Geomagic freeform software in the Anatomy department. The different linear morphometric variables and volume of the maxillary sinus were studied. SPSS version 27.0. was utilised for statistical analyses. RESULTS: The mean values of Antero-posterior diameter, Transverse diameter, Craniocaudal diameters, the height of ostium from the floor and volume of the maxillary sinus in males on the right side are 36.61 mm, 20.7 mm, 40.31 mm, 26.02 mm and 16055.24 mm³ and on the left side are 37.17 mm, 20.17 mm, 40.73 mm, 26.91 mm and 15712.66 mm³ whereas in females the values on the right side are 38.10 mm, 21.56 mm, 38.96 mm, 25.81 mm and 14687.78 mm³ and on left side are 38.23 mm, 21.53 mm, 38.48 mm, 25.28 mm and 14203.13 mm3 respectively. The side-to-side parameter differences were non-significant within the male and female groups, respectively. The females had significantly (p < 0.05) larger transverse diameters than males in both the right and left maxillary sinuses. The males tend to have a slightly larger mean craniocaudal diameter than females, but the difference was found statistically significant (p < 0.05) only in the left maxillary sinus. The gender differentiation based on the measured parameters of bilateral maxillary sinus accuracy rate was 89.4% in males and 61.8% in females. CONCLUSIONS: These parameters serve as a standard or reference point, allowing radiologists and surgeons to compare individual patient scans to population averages and aid in better clinical outcomes. The mean values of different parameters of the maxillary sinus may be utilised to differentiate various suspected sinus pathologies, which is helpful for functional endoscopic sinus surgery. Gender differentiation can be done more accurately by forensic experts using Maxillary sinus transverse diameter bilaterally, followed by craniocaudal diameter of the left side sinus for predicting the gender of an unknown maxilla.

Sinus Savvy: Exploring the Current Techniques of Maxillary Sinus Augmentation.

Sinus ridge augmentation is a surgical procedure aimed at increasing the volume of bone in the posterior maxilla to permit successful dental implant placement. The current review article presents an overview of various techniques used for sinus ridge augmentation, including the lateral window technique, crestal approach, transalveolar technique, and piezoelectric osteotomy. The article examines the advantages and limitations of each technique, such as invasiveness, surgical difficulty, and the requirement for additional procedures. Additionally, the article discusses the factors that influence the success of the procedure, including patient age, residual bone height, and the kind of bone graft substance used. The review also emphasizes the importance of proper case selection, surgical planning, and postoperative care to ensure optimal outcomes. Overall, the article provides valuable insights into the current techniques used for sinus ridge augmentation, highlighting the need for further research to improve patient outcomes and the success of placing dental implants over the long run.

Sinus membrane thickness of healthy endodontically treated maxillary molars.

OBJECTIVE: The study aimed to investigate the sinus membrane thickness (SMT) adjacent to healthy endodontically-treated maxillary molars with or without protruded apical foramen into the sinus cavity using cone-beam computed tomography (CBCT). MATERIALS AND METHODS: Images of 207 non-smoker patients aged 18-40 were retrospectively analyzed, 140 were endodontically treated, and 136 were without endodontic treatment. Patients with any sinus pathology, teeth that have symptoms, or poor root filling were excluded. Study groups consisted of Group EM-I (endodontically treated and protruded apical foramen), Group EM-C (endodontically treated and contacted apical foramen), and similarly without endodontic treatment; Group M-I and Group M-C. SMT upon the mesial, distal, and palatal roots was measured. One-way ANOVA and Student's t-tests were performed. RESULTS: Group EM-I had the thickest sinus membrane compared to other groups (p = 0.013). SMT values were 2.37-2.60 mm in Group EM-I, and 1.34-1.58 mm in other groups. Thickening (> 2 mm) percentages were 33.45% in Group EM-I and between 4.25 and 8.25% in other groups. No statistical difference was detected between first and second molars and genders (p > 0.05). CONCLUSION: When the apical foramen protruded into the sinus cavity, the conventional root canal treatment caused a minimal (between 2.37 mm and 2.60 mm) sinus membrane thickening with a rate of 33.45% based upon CBCT examinations.

Retrospective analysis of pathological changes in the maxillary sinus with CBCT.

The aim of this study is to examine the frequency of maxillary sinus pathologies and their relationship with each other using cone beam computed tomography (CBCT) and to make a new grade according to the number of affected walls. 1000 maxillary sinuses of 500 patients with CBCT images were included in the study. Anatomical variations and pathological formations of the maxillary sinuses were examined. Images were evaluated for the presence of flat, polypoidal, partial and generalized mucosal thickening, partial and total opacification, polyps and mucous retention cysts. Maxillary sinus pathologies were graded according to the number of walls affected. In the examined CBCT images, no pathology was found in 54.2% of the maxillary sinuses, while pathology was observed in 45.8%. The most common sinus pathologies were mucous retention cyst (12.3%) and polypoidal thickening (12.2%). While pneumatization, ostium obstruction, and the presence of sinus-related roots were associated with sinus pathology, no relationship was found with nasal septum deviation and the presence of septa. Before dental implant and sinus surgery applications, the presence of sinus pathologies and their relationship with anatomical variations can be evaluated with CBCT, a three-dimensional technique, and complications such as sinus membrane perforation, infection, failure to break the bone window due to the presence of antral septa, graft loss and oroantral fistula formation can be reduced.

Distribution of the intraosseous branch of the posterior superior alveolar artery relative to the posterior maxillary teeth.

Purpose: Preoperative identification of the intraosseous posterior superior alveolar artery (PSAA) is critical when planning sinus surgery. This study was conducted to determine the distance between the cementoenamel junction and the PSAA, as well as to identify factors influencing the detection of the PSAA on cone-beam computed tomography (CBCT). Materials and Methods: In total, 254 CBCT scans of maxillary sinuses, acquired with 2 different scanners, were examined to identify the PSAA. The distance from the cementoenamel junction (CEJ) to the PSAA was recorded at each maxillary posterior tooth position. Binomial logistic regression and multiple linear regression were employed to evaluate the effects of scanner type, CBCT parameters, sex, and age on PSAA detection and CEJ-PSAA distance, respectively. P-values less than 0.05 were considered to indicate statistical significance. Results: The mean CEJ-PSAA distances at the second molar, first molar, second premolar, and first premolar positions were 17.0±4.0 mm, 21.8±4.1 mm, 19.5±4.7 mm, and 19.9±4.9 mm for scanner 1, respectively, and 17.3±3.5 mm, 16.9±4.3 mm, 18.5±4.1 mm, and 18.4±4.3 mm for scanner 2. No independent variable significantly influenced PSAA detection. However, tooth position (b=-0.67, P<0.05) and scanner type (b=-1.3, P<0.05) were significant predictors of CEJ-PSAA distance. Conclusion: CBCT-based estimates of CEJ-PSAA distance were comparable to those obtained in previous studies involving cadavers, CT, and CBCT. The type of CBCT scanner may slightly influence this measurement. No independent variable significantly impacted PSAA detection.

Relationship between periapical lesions and sinus changes on multi-slice computed tomography sean.

Differentiating orofacial odontogenic pain/disorders from pain/disorders associated with maxillary sinusitis is important to avoid unnecessary dentalprocedures and to properly refer patients to colleagues/dentists and vice versa. AIM: To analyze the association between apical lesions and sinus changes and to evaluate the agreement between the diagnoses of an endodontist, a radiologist, an oral and maxillofacial surgeon, and an otolaryngologist. MATERIALS AND METHOD: 385 axial, coronal, and sagittal MSCT scans were selected using an image archiving andcommunication system (PACS). The examinations had been performed between 2018 and 2022. RESULTS: Apical lesions were observed in 36.10% of sinusitis cases, 73.8% of unilateralsinusitis cases, 48.7% of sinus floor discontinuity cases, and 67.2% of cases in which endodontic treatment had been performed. Agreement between the diagnoses made by the endodontist and those made by the other investigators was high for most study variables (k > 0.60). The exceptions were mucosal thickening, for which agreement between the endodontist and the other investigators was intermediate (k=0.397), and the presence of periapicallesions (k=0.010), previous endodontic treatment (k=0.013), and mucosal thickness (k=0.024), for which agreement between endodontists and radiologists was low. Conclusions: There was an association between sinus changes and apical lesions.

Diferenciar a dor/desordens odontogénicas orofaciais da dor/desordens as sociadas á sinusite maxilar é importante para evitar procedimentos odontológicos desnecessários e para encaminhar adequadamente os pacientes aos colegas/dentistas e vice-versa. OBJETIVO: Analisar a associagdo entre lesoes apicais e alteragóes sinusais e avaliar a concordáncia entre os diagnósticos de um endodontista, um radiologista, um cirurgido bucomaxilofacial e um otorrinolaringologista. MATERIAL E MÉTODO: foram avaliadas 385 imagens. RESULTADOS: Aslesoes apicais foram observadas em 36,10% dos casos de sinusite, em 73,8% dos casos de sinusite unilateral, em 48,7% dos casos de descontinuidade do assoalho do seio e em 67,2%odos casos em que o tratamento endodontico havia sido realizado. A concordancia entre os diagnósticos feitos pelo endodontista e os feitos pelos outros pesquisadores foi alta para a maioria das variáveis do estudo (k > 0,60). As excegoes foram o espessamento da mucosa, para o qual a concordáncia entre o endodontista e os outros pesquisadores foi intermediária (k=0,397) e a presenga delesoes periapicais (k=0,010), tratamento endodontico prévio (k=0,013) e espessura da mucosa (k=0,024), para os quais a concordáncia entre endodontistas e radiologistas foi baixa. CONCLUSÕES: Houve uma associagdo entre as alteragóes sinusais e aslesoes apicais.

Changes in Maxillary Sinus Volume and Mucosal Thickness Post Bimaxillary Advancement Procedures: A Retrospective Study.

Background: Bimaxillary surgery is an elemental procedure in the field of cranio-maxillofacial surgery. It allows for the correction of even the most challenging cases of maxillomandibular disorders, malocclusion, facial asymmetry, and disproportion. The osteotomies and maneuvers carried out during the procedure result in changes to the surrounding tissues, including the maxillary sinuses (MS). The aim of this study was to assess the change in the maxillary sinus volume and the thickness of the mucosa after maxillomandibular advancement (MMA) surgeries. Methods: A group of 25 patients who underwent MMA surgery were included in the study. Computed tomography (CT) of the head and neck region was performed 2 weeks preoperatively and 6 months postoperatively. Acquired Digital Imaging and Communications in Medicine (DICOM) files were analyzed using different software programs to calculate the medium MS mucosa thickness and MS volume. Results: A statistically significant reduction in MS volume was observed (p = 0.015). The change in the median thickness of the MS mucosa was not statistically significant. The median sella-nasion-A point angle (SNA angle) value of the group increased from 80.2 to 83.4 degrees. A weak negative correlation between the SNA delta and the MS volume delta was observed. Spearman's rank coefficient: (ρ s = -0.381, p = 0.060). Conclusions: The MMA surgery results in a reduction in the MS volume. The amount of forward movement of the maxilla may be correlated with the extent of the MS volume reduction.

Additive Manufacturing Titanium Dental Implants Placed in Sinuses Grafted with 70HA:30-TCP: A One-Year Retrospective Study for Evaluation of Survival Rate.

The present short-term retrospective study evaluated the implant survival rate and peri-implant bone loss around additive-manufactured titanium implants placed in sinuses grafted with Plenum Osshp (Plenum Bioengenharia, Jundia, SP, Brazil) (70HA:30ß-TCP) material. A total of 39 implants were inserted after 23 sinus floor elevation procedures in 16 consecutive patients. Prosthetic rehabilitation included fixed partial prostheses (three units), single crowns (eleven units), and fixed full arches (three units). Clinical and radiographic parameters of implant-supported restorations were evaluated after at least one year of occlusal loading. The implant-crown success criteria included the absence of pain, suppuration, and clinical mobility, an average distance between the implant shoulder and the first visible bone contact (DIB) < 1.0 mm from the initial surgery, and the absence of prosthetic complications at the implant-abutment interface. The overall cumulative implant survival rate was 97.43%. No prosthetic complications at the implant-abutment interface were reported. After one year, the mean DIB was 0.23 mm ± 0.14. Within the limits of this retrospective study, it can be concluded that 70 HA:30 ß-TCP allowed stable and reliable bone support to maintain healthy conditions around titanium dental implants produced by additive manufacturing.

Retrospective CBCT analysis of maxillary sinus pathology prevalence in the Saudi Arabian population.

Introduction: Maxillary sinus pathology, particularly its association with odontogenic infections, is a significant concern in dentistry. This retrospective study explored the prevalence of maxillary sinus pathologies and their association with odontogenic infections in Saudi Arabia. Methods: This retrospective study included 411 patients aged 20-80 years. Cone-beam computed tomography was performed to identify the presence, location, and characteristics of odontogenic infections and maxillary sinus pathologies. Patients' age and sex were also recorded. Results: Sinusitis was prevalent in 50.6 % of the cases, with no significant sex or age differences in the pathology distribution. A notable association was found between odontogenic and sinus pathologies, particularly on the left side. Conclusion: A significant prevalence of sinus pathologies, particularly sinusitis, was observed, with an association between odontogenic and sinus pathologies, notably on the left side. While acknowledging the limitations of the study, these findings underscore the need for integrated dental and sinus health assessments.

Radiographic outcomes of lateral sinus floor elevation at sites without perforations and sites with perforations managed with a resorbable membrane: A retrospective study.

AIM: To evaluate the radiographic outcomes of lateral sinus floor elevation with simultaneous implant placement at sites without sinus membrane perforation (SMP) and sites with SMP managed with a resorbable membrane. MATERIALS AND METHODS: One hundred and thirty-nine patients and 170 implants (56 perforation, 114 non-perforation) were included. Cone-beam computed tomography (CBCT) images were taken before surgery (T0), immediately after surgery (T1) and 6 months after surgery (T2). Post-operative augmentation parameters, including endo-sinus bone gain (ESBG) along the implant axis, mean new bone height (NBH) surrounding the implant and augmentation volume (AV), were measured at T1 and T2. RESULTS: At T1, there were no significant differences in ESBG, NBH and AV between the two groups. At T2, although ESBG did not significantly differ between the two groups, NBH (8.50 ± 1.99 mm vs. 9.99 ± 2.52 mm, p = .039) and AV (519.37 ± 258.38 mm3 vs. 700.99 ± 346.53 mm3, p < .001) were significantly lower in the perforation group. The shrinkage of graft material from T1 to T2, including ΔESBG (p = .002), ΔNBH (p < .001) and ΔAV (p < .001), was higher in the perforation group. CONCLUSIONS: SMP during LSFE with simultaneous implant placement is associated with greater resorption of the grafted area at a 6-month follow-up.

Relation between orthodontic malocculusion and maxillary sinus volume.

BACKGROUND: This study aimed to determine maxillary sinus volume (MSV) in different skeletal malocclusion classes and the correlation between MSV and craniofacial morphology on Cone Beam Computed Tomography (CBCT). MATERIALS AND METHODS: The study was performed retrospectively on CBCT images of individuals aged 12-24 years. A total of 129 patients (70 females, 59 males) with a normal vertical growth pattern (27° ≤ SNGoMe ≤ 38°) were divided into three groups according to malocclusion. Group 1 consisted of Class I (1 ≤ ANB ≤ 4) (n = 46) patients, Group 2 consisted of Class II (ANB > 4) (n = 47) patients, and Group 3 consisted of Class III (ANB < 1) (n = 36) patients. Four angular (SNA, SNB, ANB, SNGoMe) and linear (S-N, ANS-PNS, S-Ar, N-ANS) parameters were measured to evaluate craniofacial morphology. Right and left MSV were measured using Dolphin 11.0 (Dolphin Imaging, Chatsworth, CA, USA) Imaging software. Pearson's correlation analysis was performed to assess statistical correlation. RESULTS: MSV was larger in males than females (male AMSV = 14244.1 ± 4735.8, female AMSV = 12778.2 ± 4606.9 p = 0.011) in the general population, but just the Class II group showed this (male AMSV = 16089.6 ± 4330.4, female AMSV= 12705.9 ± 3210.2, p = 0.008). RMSV and LMSV were similar (female p = 0.181 male p = 0.097), and MSV showed no significant differences between the different malocclusion classes in both sex (female p = 0.315, male p = 0.118). In the Class III group, SNB was positively correlated with RMSV (r = 416, p = 0.012). MSV showed significant positive correlation with N-ANS in all groups (Class I r = 0.359, p = 0.014, Class II r = 0.336, p = 0.021, Cl III r = 0.387, p = 0.02). In the Class II and Cl III groups, there is a statistically significant correlation between MSV and the S-N parameter (Class II r = 0.304, p = 0.038, Class III r = 0.412, p = 0.013). ANS-PNS parameter was measured at the lowest statistically significant level (female 43.1 ± 3.9a, p < 0.001, male 43.1 ± 4.3a, p < 0.001) in the Class III group but no correlation was found with MSV. Only Class II group showed a weak positive correlation between MSV and ANS-PNS (r = 0.314, p = 0.032). CONCLUSIONS: There was no difference regarding MSV between malocclusion classes. Class II males exhibit significantly larger MSV compared to females. There is a correlation between MSV and SNB, S-N, N-ANS and ANS-PNS parameters for various orthodontic skeletal patterns. Further studies are needed to understand the relationship between MSV and different skeletal structures.

Self-supervised learning for classifying paranasal anomalies in the maxillary sinus.

PURPOSE: Paranasal anomalies, frequently identified in routine radiological screenings, exhibit diverse morphological characteristics. Due to the diversity of anomalies, supervised learning methods require large labelled dataset exhibiting diverse anomaly morphology. Self-supervised learning (SSL) can be used to learn representations from unlabelled data. However, there are no SSL methods designed for the downstream task of classifying paranasal anomalies in the maxillary sinus (MS). METHODS: Our approach uses a 3D convolutional autoencoder (CAE) trained in an unsupervised anomaly detection (UAD) framework. Initially, we train the 3D CAE to reduce reconstruction errors when reconstructing normal maxillary sinus (MS) image. Then, this CAE is applied to an unlabelled dataset to generate coarse anomaly locations by creating residual MS images. Following this, a 3D convolutional neural network (CNN) reconstructs these residual images, which forms our SSL task. Lastly, we fine-tune the encoder part of the 3D CNN on a labelled dataset of normal and anomalous MS images. RESULTS: The proposed SSL technique exhibits superior performance compared to existing generic self-supervised methods, especially in scenarios with limited annotated data. When trained on just 10% of the annotated dataset, our method achieves an area under the precision-recall curve (AUPRC) of 0.79 for the downstream classification task. This performance surpasses other methods, with BYOL attaining an AUPRC of 0.75, SimSiam at 0.74, SimCLR at 0.73 and masked autoencoding using SparK at 0.75. CONCLUSION: A self-supervised learning approach that inherently focuses on localizing paranasal anomalies proves to be advantageous, particularly when the subsequent task involves differentiating normal from anomalous maxillary sinuses. Access our code at https://github.com/mtec-tuhh/self-supervised-paranasal-anomaly .

Incidentally detected ectopic maxillary tooth in an asymptomatic adult male: A rare case scenario.

Ectopic teeth, growing in abnormal locations like the maxillary sinus, are rare occurrences, with uncertain causes including trauma, infection, and developmental abnormalities. They often appear in the second or third decade of life, sometimes without symptoms. They are often missed as symptoms can mimic chronic sinusitis but may include sinonasal issues like obstruction and facial pain. Complications ranging from recurrence to potential blindness or carcinoma have been reported. Diagnosis involves radiographic imaging, with CT scans providing precise localization. Following accurate diagnosis, treatment typically involves surgical removal, with endoscopic procedures gaining popularity due to reduced risks. Follow-up for asymptomatic cases can be conducted through periodic radiographs. We report a case of maxillary ectopic tooth as an incidental finding in an asymptomatic patient presenting to the emergency department with head trauma.

[Comparison of 5-year survival rate and analysis of prognostic factors influencing the prognosis of adenoid cystic carcinoma and squamous cell carcinoma of the maxillary sinus: based on the SEER database].

Objective:To analyze the difference in 5-year survival between maxillary sinus adenoidal cystic carcinoma（maxillary sinus adenoid cystic carcinoma, MSACC） and squamous cell carcinoma（maxillary sinus squamous cell carcinoma, MSSCC） using the National Cancer Institute's Surveillance, Epidemiology, and End. Results:database（SEER） and to explore the factors associated with the prognosis of the two tumors. Methods:The data of 161 patients with MSACC and 929 patients with MSSCC were collected from SEER database, and the 5-year overall survival rate（OS） and tumor specific survival rate（CSS） were compared between the two groups before and after propensity score matching. The forest map of multivariate Cox proportional hazard regression model was established to analyze the prognostic factors affecting the survival rate of patients with MSACC and MSSCC. Results:There were statistical differences in 5-year OS and CSS between MSACC and MSSCC before and after propensity score matching（P<0.001）. Multivariate regression analysis showed that age, side of the disease, lymph node metastasis, operation and radiotherapy were the influencing factors of OS in MSACC, while age and operation were the influencing factors of CSS. Age, race, T grade, lymph node metastasis, systemic metastasis, surgery, radiotherapy and chemotherapy are the influencing factors of OS of MSSCC. Age, T grade, lymph node metastasis, systemic metastasis, surgery, radiotherapy and chemotherapy are the influencing factors of CSS. Conclusion:The 5-year survival rate of MSACC is higher than that of MSSCC. Surgery plays a positive role in the prognosis of the two kinds of tumors. The analysis results can provide some reference for their survival expectations and treatment choices.

Emergence of artificial intelligence for automating cone-beam computed tomography-derived maxillary sinus imaging tasks. A systematic review.

Cone-beam computed tomography (CBCT) imaging of the maxillary sinus is indispensable for implantologists, offering three-dimensional anatomical visualization, morphological variation detection, and abnormality identification, all critical for diagnostics and treatment planning in digital implant workflows. The following systematic review presented the current evidence pertaining to the use of artificial intelligence (AI) for CBCT-derived maxillary sinus imaging tasks. An electronic search was conducted on PubMed, Web of Science, and Cochrane up until January 2024. Based on the eligibility criteria, 14 articles were included that reported on the use of AI for the automation of CBCT-derived maxillary sinus assessment tasks. The QUADAS-2 (Quality Assessment of Diagnostic Accuracy Studies 2) tool was used to evaluate the risk of bias and applicability concerns. The AI models used were designed to automate tasks such as segmentation, classification, and prediction. Most studies related to automated maxillary sinus segmentation demonstrated high performance. In terms of classification tasks, the highest accuracy was observed for diagnosing sinusitis (99.7%), whereas the lowest accuracy was detected for classifying abnormalities such as fungal balls and chronic rhinosinusitis (83.0%). Regarding implant treatment planning, the classification of automated surgical plans for maxillary sinus floor augmentation based on residual bone height showed high accuracy (97%). Additionally, AI demonstrated high performance in predicting gender and sinus volume. In conclusion, although AI shows promising potential in automating maxillary sinus imaging tasks which could be useful for diagnostic and planning tasks in implantology, there is a need for more diverse datasets to improve the generalizability and clinical relevance of AI models. Future studies are suggested to focus on expanding the datasets, making the AI model's source available, and adhering to standardized AI reporting guidelines.

Three-dimensional changes and influencing factors of tent space following osteotome sinus floor elevation without grafting: A 48-month retrospective radiographic study.

OBJECTIVES: To analyze the three-dimensional stability and morphologic changes of tent space after the osteotome sinus floor elevation (OSFE) procedures without bone grafts. MATERIALS AND METHODS: Forty-six implants placed using the OSFE technique with simultaneous implant placement without bone grafts were included in this retrospective study. Cone-beam computed tomography (CBCT) scans of the augmented sinuses were obtained pre- and postoperatively up to 48 months of follow-up. The maxillary sinus cavity profiles were outlined using three-dimensional virtual reconstruction and superimposition of CBCT scans. The three-dimensional changes in the tent space were measured. A generalized estimating equation (GEE) was used to explore potential factors. RESULTS: The implant survival rate was 97.8%. The mean volume of remaining tent space immediately after surgery was 96.8 ± 70.5 mm3, shrinking to 31.0 ± 24.9 mm3 after 48 months, while the mean percentage of remaining tent space volume decreased to 29.1 ± 20.7%. The tent space volume and the percentage of residual tent space volume only decreased significantly within 12 months after surgery (p = .008, .013). GEE results indicated positive correlations between the percentage of remaining tent space volume and implant protrusion length (p = .000) and apical height (p = .000), with a negative correlation between the sinus floor area immediately after surgery (p = .002) and the healing time (p = .022). CONCLUSIONS: The volume of the tent space rapidly shrank after OSFE without bone grafts. Several factors might influence the tent space stability. Long-term clinical trials with larger sample sizes are necessary to further validate the results.

Repair of schneiderian membrane perforation through membrane fixation with simultaneous implant placement: a case report.

Perforation of the maxillary sinus membrane is a common complication during maxillary sinus elevation. Intraoperative perforation of the maxillary sinus membrane may complicate the procedure and indirectly lead to implant failure. Timely repair of the perforated maxillary sinus membrane can effectively improve the implant survival rate. This case describes a method of repairing a maxillary sinus membrane perforation with a suture-attached collagen membrane and shows stable repair results at a 31-month follow-up.

Evaluation of osteomeatal complex by cone-beam computed tomography in patients with maxillary sinus pathology and nasal septum deviation.

BACKGROUND: This study aimed to determine if there is a relationship between the presence of maxillary sinus pathology, nasal septum deviation and various lengths of the osteomeatal complex. METHODS: A total of 223 CBCT images were included in the study. The lengths of the osteomeatal complex (maxillary sinus ostium width, infundibulum length, maxillary sinus ostium height) were analyzed. The presence of maxillary sinus pathology, nasal septum deviation, age, sex, right-left, septum deviation level, and the relationship between pathology level and all variables were evaluated. RESULTS: The average maxillary sinus ostium width, ostium height and infundibulum length were 3.06 ± 0.70 mm, 30.10 ± 5.43 mm and 8.82 ± 1.86 mm, respectively. Ostium width was significantly higher in the healthy group than in the groups evaluated in the presence of deviation and pathology. A significant difference was found in infundibulum length only between the healthy condition and the condition evaluated in the presence of deviation. No significant difference was observed between the groups in terms of ostium height. In all groups, ostium height and infundibulum length were significantly higher in men than in women. The age group with the highest average ostium height was found in the 35-44 age group (p < 0.001). CONCLUSION: Identifying normal and abnormal conditions in the osteomeatal complex area is important for diagnosing the cause of a patient's complaint, guiding the surgical procedures to be performed, and preventing possible complications that may arise during surgical procedures.

The comparison of visibility of the maxillary sinus septa between cone-beam computed tomography scans and panoramic radiograph images as dependent on the cortical bone thickness: a retrospective comparative study.

PURPOSE: To analyze the visibility of the maxillary sinus septa (MSS) in panoramic radiography (PR) versus cone beam computed tomography (CBCT) and to investigate whether the buccal cortical bone thickness (BT) or the septa dimensions influence their visibility. METHODS: Corresponding PR and CBCT images of 355 patients were selected and examined for MSS visibility. The septa dimensions (width, height, depth) and the BT were measured. Results were analysed statistically. RESULTS: Comparing the corresponding regions on CBCT and PR, 170 MSS were identified; however, only 106 of these were also visible using PR. The MSS visibility was significantly higher on CBCT versus PR images (P1: p = 0.039, P2: p = 0.015, M1: p = 0.041, M2: p = 0.017, M3: p = 0.000), except region C (p = 0.625). Regarding the measurements of MSS dimensions, only the height in region M1 (p = 0.013) and the width in region P2 (p = 0.034) were significantly more visible on CBCT. The BT in the area of the MSS was found to have a marginal influence on its visibility on the PR images only in regions M3 and M1 (M3: p = 0.043, M1: p = 0.047). In terms of MSS visibility based on the dimensions, significance was found for all three influencing variables only in region P2 (width; p = 0.041, height; p = 0.001, depth; p = 0.007). There were only isolated cases of further significance: M3 for width (p = 0.043), M2 for height (p = 0.024), and P1 for depth (p = 0.034), no further significance was noted. CONCLUSION: MSS visibility appears significantly higher on CBCT versus PR images. It is concluded that the septa dimensions and BT can influence MSS visibility on PR images just in certain regions.