Sinus Savvy: Exploring the Current Techniques of Maxillary Sinus Augmentation.

Sinus ridge augmentation is a surgical procedure aimed at increasing the volume of bone in the posterior maxilla to permit successful dental implant placement. The current review article presents an overview of various techniques used for sinus ridge augmentation, including the lateral window technique, crestal approach, transalveolar technique, and piezoelectric osteotomy. The article examines the advantages and limitations of each technique, such as invasiveness, surgical difficulty, and the requirement for additional procedures. Additionally, the article discusses the factors that influence the success of the procedure, including patient age, residual bone height, and the kind of bone graft substance used. The review also emphasizes the importance of proper case selection, surgical planning, and postoperative care to ensure optimal outcomes. Overall, the article provides valuable insights into the current techniques used for sinus ridge augmentation, highlighting the need for further research to improve patient outcomes and the success of placing dental implants over the long run.

The Impact of Maxillary Sinus Pneumatization on the Quality of the Alveolar Bone in Dentated and Edentulous Patients: A Cone-Beam Computed Tomography Radiographic Analysis.

Background This study aimed to describe the morphometric differences of maxillary alveolar bone's height, width, and densitometric differences in the posterior region where maxillary sinus pneumatization occurred. Methodology A cross-sectional, cone-beam computed tomography (CBCT) study used 123 CBCT images as a non-randomized convenient sample of sinus pneumatized cases. Bone height, bone width (in mm), and average density of the remaining ridge of all patients were used as study variables. Analysis of the qualitative variables were as frequency and percentages. Parametric Student's t-test and non-parametric chi-squared tests were used to compare the groups. The significance level was set at a p-value ≤0.05. Results The sample included CBCT radiographs for patients who had a mean age of 42.79 ± 12.32 with males constituting 69 (56.1%) of the patients. There was no gender difference between the present and missing teeth at the measured sites of the first premolar, second premolar, first molar, and second molar (p > 0.05). The mean measurements of height and average bone density were significantly higher in the dentate sites; however, the mean width was higher in the edentulous sites (p = 0.001). Conclusions Average bone height and density were significantly decreased at the edentulous sites of sinus pneumatized cases than the dentate sites with no gender difference.

Assessment of absorbable gelatin sponge for maxillary sinus floor elevation versus anorganic bovine bone minerals: a randomized clinical trial.

PURPOSE: The present study compared the absorbable gelatin sponge as a space-filling material versus anorganic bone bovine mineral (ABBM) in maxillary sinus augmentation with simultaneous endosseous dental implant placement. METHODS: Eighteen maxillary sinus floor elevation cases were randomly allocated into two groups. The first group received ABBM, while the second group received an absorbable gelatin sponge as a space-filling material. For both groups, CBCT scans were obtained immediately postoperatively and six months later to calculate the difference in sinus floor bone gain. Osstell readings were recorded both at the time of implant placement and implant exposure with a total of twenty-three dental implant placements in relation to the eighteen elevated sinus floors. RESULTS: The mean radiographic sinus floor gain in the ABBM group was 10.2 mm (± 2.5), while in the absorbable gelatin sponge group was 5.4 mm (± 2.0), with a mean difference of 4.8, which was statistically significant (p < 0.001). The mean implant stability for the ABBM was 77.3 (± 4.9), while in the absorbable gelatin sponge group was 74.2 (± 3.0), with a mean difference of 3.1, which was statistically insignificant (p = 0.1610). CONCLUSION: The ABBM showed superior results regarding the amount of radiographic sinus floor bone gain. However, the implant stability was invariable between both groups.

Cirugía de elevación del seno maxilar: "Utilidad de las diferentes técnicas. "Caso clínico de elevación de seno y colocación de implantes Phibo TSH y TSA / Maxillary sinus lift surgery: "Usefulness of different techniques. "Clinical case of sinus lift and placement Phibo TSH and TSA implants

Se realizó una revisión bibliográfica sobre los procedimientos para el aumento o elevación del seno maxilar para la colocación posterior o conjunta de implantes endoóseos. Nuestro objetivo es presentar un caso clínico y revisar la literatura existente. Se puede apreciar que el tema ha sido tratado ampliamente por distintos especialistas, describiendo las distintas técnicas, y también que es un procedimiento con un alto porcentaje de éxito. Por otro lado, habitualmente se puede realizar en consulta ambulatoria, respetando los conceptos de asepsia que se ha de cuidar en los procedimientos de cirugía oral: correcta preparación del equipo, esterilización del instrumental y desinfección del campo quirúrgico. Es decir, todo el instrumental en bolsas herméticas previamente esterilizadas, campos quirúrgicos y guantes estériles, mesa y equipamiento debidamente todo desinfectado. Además de que tanto el equipo de asistencia como el cirujano deben contar con gorros y batas desechables quirúrgicas estériles. Es importante resaltar que al manejar rellenos óseos deben también con los máximos protocolos de esterilización envasado para su utilización. (AU)

A bibliographic review was carried out on the procedures for the augmentation or elevation of the maxillary sinus for the posterior or/and placement of endosseous implants. Our objective is to present a clinical case and review the existing literature. It can be seen that the subject has been extensively treated by different specialists, describing the different techniques, and also that it is a procedure with a high percentage of success. On the other hand, it can usually be performed in a common dental office with the appropriate aseptic measures; that means: correct preparation of the equipment, sterilization of the instruments and disinfection of the surgical field. That is, all the instruments should be packed in hermetic bags previously sterilized, surgical fields and sterile gloves, table and equipment all properly disinfected. In addition to the fact that both the surgical-nurse team and the surgeon must have disposable sterile surgical caps and gowns. It is important to highlight that when handling bone fillers, they must also comply with the maximum packaging sterilization protocols for their use. (AU)

Anatomical variations and accessory structures in the maxilla in relation to implantological procedures: an observational retrospective study of 212 cases using cone-bean computed tomography.

PURPOSE: This study used cone-beam computed tomography (CBCT) to analyze the prevalence of several maxillary anatomical/accessory structures, as well as variations within each type, assessing how accurate diagnosis can minimize the risk of intraoperative complications during implantological procedures in the oral cavity. METHODS: 212 CBCT scans of the maxilla were analyzed, captured over a period of 18 months for surgical planning purposes. The prevalence of posterior superior alveolar arteries (PSAA), maxillary sinus septa (MSS), and branches of the canalis sinuosus (CS) were evaluated, as were the diameter and location of each anatomical structure in horizontal and vertical planes. P < 0.05 was considered statistically significant. RESULTS: PSAAs were observed in 99.1% of cases, the intrasinus type being the most frequent; MSS were noted in 15.6% of the sample, mainly in the posterior region with sagittal orientation; CS branches were observed in 50% of patients, mainly in relation to the incisors and significantly more prevalent among males. CONCLUSIONS: The use of CBCT significantly increases the possibility of clearly identifying these anatomical structures. The differences found between patients highlight the importance of carrying out an exhaustive radiological study of the individual to prevent complications, such as Schneiderian membrane perforation, neurovascular damage or bleeding during surgery.

Elevación de seno maxilar sin injerto y colocación simultánea de implante dental / Graftless maxillary sinus lift with simultaneous dental implant placement

Introducción: La elevación de seno maxilar con implante dental simultáneo, sin el uso de substitutos óseos, ha retomado la teoría del potencial de neoformación ósea, que el coágulo de sangre alojado bajo la membrana de Schneider por sí solo presenta. Excluyendo así la necesidad de materiales exógenos. Objetivo: Exponer la efectividad de la elevación de seno maxilar con implante dental simultáneo, sin el uso de injerto, mediante la evaluación de la cantidad de ganancia ósea vertical. Presentación de casos: Caso 1: Paciente de 62 años, género femenino, que fue sometida a una elevación de seno maxilar sin injerto e implante dental simultáneo, con técnica de ventana lateral debido a altura ósea reducida de 5,24 mm. Luego del período de seguimiento tomográfico de 12 meses, después de la carga protésica, se logró una altura ósea vertical de 10,2 mm, lo que dio como resultado una ganancia ósea vertical de 4,96 mm. Caso 2: Paciente de 48 años, género femenino, que fue sometida a una elevación de seno maxilar sin injerto e implante dental simultáneo, con técnica transalveolar, mediante el uso de piezoeléctrico debido a una altura ósea reducida de 8,33 mm. Luego del período de seguimiento radiográfico de 4 meses, antes de la carga protésica, se logró una altura ósea vertical de 11,55 mm, lo que dio como resultado una ganancia ósea vertical de 3,19 mm. Conclusiones: Con base en estos 2 informes de casos, la elevación de seno maxilar e implante dental simultáneo sin injerto se asocian con la reducción de la morbilidad quirúrgica, menor probabilidad de procesos infecciosos y menor costo de la cirugía. Por lo tanto, puede considerarse una alternativa quirúrgica para la colocación de implantes en el maxilar posterior superior debido a deficiencias óseas verticales, independientemente de la técnica (lateral o transalveolar(AU)

Introduction: Maxillary sinus lift with simultaneous dental implantation without using bone substitutes, reapproaches the theory about the bone neoformation potential of the blood clot housed under the Schneider membrane, all by itself, thus excluding the need to use exogenous materials. Objective: Discuss the effectiveness of graftless maxillary sinus lift with simultaneous dental implant placement through an evaluation of the amount of vertical bone gain. Case presentation: Case 1: Female 62-year-old patient undergoing graftless maxillary sinus lift with simultaneous dental implantation by lateral window technique due to a reduced bone height of 5.24 mm. After a 12-month tomographic follow-up period subsequent to prosthetic loading, a 10.2 mm vertical bone height was achieved, resulting in 4.96 mm vertical bone gain. Case 2: Female 48-year-old patient undergoing graftless maxillary sinus lift with simultaneous dental implantation by transalveolar technique using a piezoelectric generator due to a reduced bone height of 8.33 mm. After a 4-month radiographic follow-up period, before prosthetic loading, an 11.55 mm vertical bone height was achieved, resulting in 3.19 mm vertical bone gain. Conclusions: According to these two case reports, graftless maxillary sinus lifting with simultaneous dental implantation is associated to reduced surgical morbidity, a lesser probability of infectious processes and lower surgical costs. It may therefore be considered to be a surgical alternative for implant placement in the posterior maxilla due to vertical bone deficiencies, regardless of the technique used (lateral or transalveolar(AU)

Implant Placement Post Maxillary Sinus Lift Using Osseodensification Concept: A Case Report.

Pneumatisation of the maxillary sinus is a roadblock to the successful placement of endosseous implants in the posterior maxilla. It is mandatory that the sinus has to be elevated to facilitate implant placement, for which the operating clinician should be well versed with the anatomy of the sinus to avoid intraoperative mishaps. Many techniques of sinus augmentation have been tried and tested with successful outcomes. This article presents a report of a 60-year-old female who had root stumps in relation to upper left first maxillary molar. She wanted an implant to replace the root stumps, however, on cone-beam computed tomography (CBCT) examination the sinus was pneumatised and required augmentation. The root stumps were extracted and after a six-month waiting window, she was treated with an indirect sinus augmentation procedure using Densah™ burs (Jackson, MI: Versah, LLC) after which an implant (5 mm x 8 mm) was placed with good osseointegration at three-month follow-up. The Densah™ bur facilitated sinus lift procedure is a good option for pneumatised sinuses with inadequate residual bone height.

Ridge Augmentation Is a Prerequisite for Successful Implant Placement: A Literature Review.

Alveolar ridge defects are commonly seen in partially dentate patients, and they jeopardize speech, appearance, and oral hygiene maintenance. These defects affect both soft tissues and bone and are mainly caused by trauma. These defects are more prevalent in middle-aged male patients and it is imperative that the defective ridge is augmented before receiving an implant or a fixed partial denture. This review focuses on the different types of ridge defects and their treatment options.

[Study on osteogenesis and angiogenesis of Pluronic F-127 composite gel loaded with transforming growth factor ß 3 and bone marrow mesenchymal stem cells in rabbit maxillary sinus lift].

OBJECTIVE: To prepare Pluronic F-127 composite gel loaded with transforming growth factor ß 3 (TGF-ß 3) and bone marrow mesenchymal stem cells (BMSCs) and observe its osteogenesis and angiogenesis effects in vivo and in vitro. METHODS: BMSCs were isolated from the tibial and femoral bone marrow of New Zealand white rabbits and passaged, and the 3rd generation cells were used for subsequent experiments after identification of osteogenic and adipogenic induction. Pluronic F-127 powder and TGF-ß 3 were dissolved in L-DMEM medium to prepare Pluronic F-127 gel, TGF-ß 3+Pluronic F-127 gel, BMSCs+Pluronic F-127 gel, and TGF-ß 3+BMSCs+Pluronic F-127 gel. The 3rd generation of BMSCs were cultured with L-DMEM medium (group A), osteogenic induction medium (group B), osteogenic induction medium containing Pluronic F-127 gel (group C), and osteogenic induction medium containing TGF-ß 3+Pluronic F-127 gel (group D), respectively. After 14 days of culturing, alkaline phosphatase (ALP) staining and Alizarin red staining were used to observe the osteogenesis. In addition, the BMSCs were cultured with L-DMEM medium containing Pluronic F-127 gel (experimental group) and L-DMEM medium (control group) for 1, 2, 3, and 4 days, respectively. And the cell proliferation was detected by MTT assay. Ten New Zealand white rabbits were taken to prepare the maxillary sinus lift models, and Pluronic F-127 gel (group A), TGF-ß 3+Pluronic F-127 gel (group B), BMSCs+Pluronic F-127 gel (group C), and TGF-ß 3+BMSCs+Pluronic F-127 gel (group D) were injected into the bone defects, respectively. On the 8th week, imaging examination and HE staining were used to observe the formation of new bone, immunohistochemical staining was used to observe the expression of vascular endothelial growth factor (VEGF) and bone morphogenetic protein 2 (BMP-2) in bone tissue, and Western blot was used to detect the relative expressions of VEGF, oncostatin M (OSM), and BMP-4 proteins in bone tissue. RESULTS: Osteogenic and adipogenic induction identified the isolated and cultured cells as BMSCs. In vitro staining showed that ALP activity and Alizarin red concentration in group D were significantly higher than those in other groups ( P<0.05). MTT assay showed that the absorbency ( A) value of the two groups increased gradually, and there was no significant difference between the groups at each time point ( P>0.05). In vivo experimental imaging examination showed that the bone mineral density and osteogenic continuity of group D were the best, and the proportion of new bone volume was superior to other groups ( P<0.05). HE staining showed that compared with other groups, bone trabeculae in group D were dense and arranged regularly, on which a large number of osteoblasts and osteoclasts were distributed, and a large number of new bone formation could be seen. Immunohistochemical staining showed the strong positive expressions of BMP-2 and VEGF in group D ( P<0.05); Western blot detection showed that the relative expressions of VEGF, OSM, and BMP-4 proteins in group D were significantly higher than those in other groups ( P<0.05). CONCLUSION: The BMSCs in Pluronic F-127 composite gel loaded with TGF-ß 3 and BMSCs can be induced to differentiate into osteoblasts, and the composite gel has no toxic effect on cells, and has obvious osteogenesis and angiogenesis in the maxillary sinus of rabbits.

Comparison of immunohistochemical analysis on sinus augmentation using demineralized tooth graft and bovine bone.

OBJECTIVES: The purpose of this animal research was to compare bone regeneration in augmented rabbit maxillary sinuses treated with demineralized particulate human-tooth graft and anorganic bovine bone by immunohistochemical analysis. MATERIALS AND METHODS: Piezoelectric bilateral sinus augmentation was performed in eight adult rabbits. In the control group, anorganic bovine was grafted in the maxillary sinus following elevation of the sinus membrane. In the experimental group, demineralized human particulate tooth bone was grafted in the sinus. Bone regeneration in augmented sinuses was evaluated by immunohistochemical analysis using various markers of osteoprogenitor cells. RESULTS: The number of bromodeoxyuridine-labeled cells was significantly higher in the experimental group than in the control group at eight weeks. The immunoreactivity of proliferating-cell nuclear antigen was increased slightly in the experimental group relative to the control group at eight weeks. Other bone markers were expressed equally in the two groups. CONCLUSION: In the rabbit maxillary sinus, higher osteoinduction was correlated with demineralized human particulate tooth bone grafting than with anorganic bovine grafting.

Evidence-Based Clinical Efficacy of Leukocyte and Platelet-Rich Fibrin in Maxillary Sinus Floor Lift, Graft and Surgical Augmentation Procedures.

Bone augmentation techniques have increasingly been indicated for re-creating adequate bone height and volume suitable for dental implant sites. This is particularly applicable in the severely atrophic posterior maxilla where sinus perforation (ruptured Schneiderian membrane) is a very common complication and sinus floor elevation or lift is frequently considered a standard procedure. The augmentation of the maxillary sinus can be performed with or without grafting biomaterials. Herein, numerous biomaterials and bone substitutes have been proposed, primarily to sustain the lifted space. In addition, cytokines and growth factors have been used to stimulate angiogenesis, enhance bone formation as well as improve healing and recovery period, either as the sole filling material or in combination with bone substitute materials. Within such, is the family of autologous blood extracts, so-called platelet concentrates, which are simply the "product" resulting from the simple centrifugation of collected whole blood samples of the patient, immediately pre-surgery. Platelet-Rich Fibrin (PRF), a sub-family of platelet concentrates, is a three-dimensional (3-D) autogenous biomaterial obtained, without including anti-coagulants, bovine thrombin, additives, or any gelifying agents during the centrifugation process. Today, it is safe to say that, in implant dentistry and oral and maxillofacial surgery, PRFs (particularly, the pure platelet-rich fibrin or P-PRF and leukocyte and platelet-rich fibrin or L-PRF sub-classes) are receiving the most attention, essentially due to their simplicity, rapidness, user-friendliness/malleability, and cost-effectiveness. Whether used as the sole "bioactive" filling/additive material or combined with bone substitutes, the revolutionary second-generation PRFs have been very often associated with promising clinical results. Hence, this review aims to provide a 10-years update on the clinical effectiveness of L-PRF when applied/used as the "sole" biomaterial in maxillary sinus augmentation procedures. An electronic search using specific keywords for L-PRF and maxillary sinus augmentation was conducted in three main databases (PubMed-MEDLINE database, Google Scholar and Cochrane library) for the period between January 2009-February 2020. The quest yielded a total of 468 articles. Based on the pre-established strict inclusion/exclusion criteria, only seven articles were deemed eligible and included in the analysis. Surprisingly, of the 5 studies which used de-proteinized bovine bone mineral (DBBM) in combination with L-PRF, 60% acclaimed no significant effects and only 40% declared positive effects. Of the two articles which had used allogenous bone graft, 50% declared no significant effects and 50% acclaimed positive effects. Only one study had used L-PRF as the sole grafting material and reported a positive effect. Likewise, positive effects were reported in one other study using L-PRF in combination with a collagen membrane. Due to the heterogeneity of the included studies, this review is limited by the inability to perform a proper systematic meta-analysis. Overall, most of the published studies reported impressive results of L-PRF application as a grafting material (sole or adjuvant) in maxillary sinus augmentation and dental implant restorative procedures. Yet, distinct technical processing for L-PRF preparation was noted. Hence, studies should be approached with caution. Here in, in sinus lift and treatment of Schneider membrane, the formation of mature bone remains inconclusive. More studies are eagerly awaited in order to prove the beneficial or detrimental effects of PRFs, in general and L-PRFs, in specific; especially in their tissue regenerative potential pertaining to the promotion of angiogenesis, enhancing of cell proliferation, stimulation of cell migration and autocrine/paracrine secretion of growth factors, as well as to reach a consensus or a conclusive and distinct determination of the effect of leukocytes (and their inclusion) on inflammation or edema and pain; a call for standardization in PRFs and L-PRFs composition reporting and regimenting the preparation protocols.

Vertical Bone Gain after Sinus Lift Procedures with Beta-Tricalcium Phosphate and Simultaneous Implant Placement-A Cross-Sectional Study.

OBJECTIVES: The objective of this cross-sectional study was to evaluate the vertical bone gain achieved after the sinus lift procedure with beta-tricalcium phosphate (ß-TCP) used as a bone substitute and simultaneous implant placement. METHODS: One hundred and twenty-eight sinus lift procedures (utilizing a synthetic ceramic containing 99.9% tricalcium phosphate as a bone substitute) and simultaneous implant placements were performed on 119 patients. The lateral window approach surgical protocol for maxillary sinus lift was performed on the patients. The implants were evaluated using cone-beam computed tomography (CBCT) at 6 months following placement. The vertical bone gain was considered a primary variable, while implant length, diameter, and location were considered secondary variables. RESULTS: The ANOVA results showed no statistical difference in vertical bone gain with implant parameters like implant length, width, and position. Pearsons correlation revealed a statistically significant positive correlation with vertical bone gain and implant length and diameter. A further multivariate linear regression analysis was performed and it observed statistically significant associations between the variables in the study after adjusting for confounding factors. CONCLUSIONS: This study concluded that there was vertical bone gain with the usage of ß-TCP in maxillary sinus lift surgical procedure with immediate implant placement and that implant variables like length and diameter had a significant influence on the average bone gain values. The implant position did not have a statistically significant influence but there was considerable variation in the bone gain between first, second premolar, and molar regions.

[Development of tilted implant for free end of maxillary posterior teeth].

Vertical bone insufficiency in the maxillary posterior teeth is a common clinical situation. At present, the bone insufficiency in the maxillary posterior teeth is mainly overcome by bone grafting through maxillary sinus floor elevation. Compared with traditional axial implantation, tilted implantation can better avoid bone grafting, reduce complications, shorten the treatment cycle, reduce the treatment cost for patients, and gradually be promoted in clinical settings. This article reviews the concept, biomechanics, clinical evaluation, and digital trend of tilted implants of maxillary posterior teeth.

Development of tilted implant for free end of maxillary posterior teeth / 华西口腔医学杂志

Vertical bone insufficiency in the maxillary posterior teeth is a common clinical situation. At present, the bone insufficiency in the maxillary posterior teeth is mainly overcome by bone grafting through maxillary sinus floor elevation. Compared with traditional axial implantation, tilted implantation can better avoid bone grafting, reduce complications, shorten the treatment cycle, reduce the treatment cost for patients, and gradually be promoted in clinical settings. This article reviews the concept, biomechanics, clinical evaluation, and digital trend of tilted implants of maxillary posterior teeth.

Survival of Implants after Indirect Maxillary Sinus Elevation Procedure: A Two Years Longitudinal Study.

AIM: The aim of the study was to evaluate the survival rate of two diverse implant systems with different implant surfaces with the same geometrical design. MATERIALS AND METHODS: One hundred fifty patients were included in the study in which 95 were males and 55 were females and 150 implants were placed using indirect sinus floor elevation technique and only one implant was placed in each subject and they were categorized into two groups of 100 in group A and 50 in group B as per two different implant systems. At review appointments, implants were tested clinically and radiographically and were examined for signs of infection. The patients were examined periodically after placement of the implants, and follow-up was conducted annually. RESULTS: Results of the Chi-square analysis showed no significant association between the type of implant surface and rate of success or failure of the implant. There was no significant difference between the observed and expected frequency of successful implants in group A as well as group B, indicating that the surface type of implant had no significant association with the success of the implant in group A and B. CONCLUSION: To date, there is no consensus in the literature regarding the best surface and even on the macrotopography of the implants for better osseointegration. However, Surface treatments improve the result of osseointegration, especially in the early stages, benefiting bone affixation with qualitative and quantitative enhancements. In the present study, we achieved clinical success with both kinds of implant surfaces however Bioetched implant surface showed promising results comparable to Tiunite surface of Nobel BioCare Implants. In the future, more case-controlled studies with longer follow-up are needed to validate the results of the present findings.

Distribution of the maxillary artery in the deep regions of the face and the maxilla: Clinical applications.

Composite tissue allotransplantation of the face has led to renewed interest in the vascularization of the maxilla. The maxillary artery, which is deep within the tissue and difficult to access, is considered the main artery of the maxilla. The objective of this study was to describe the distribution of the maxillary artery in the deep regions of the face and maxilla. Twenty-four maxillae were studied, of which 20 were injected with latex and four with India ink. The maxillary artery in the pterygopalatine fossa gave rise to the sphenopalatine artery, infraorbital artery, descending palatine artery, and posterior superior alveolar artery in all 24 cases. The posterior superior alveolar artery gave rise to a periosteal branch and an intraosseous branch (in the wall of the maxillary sinus) in 18 cases. The branch passed through part of the wall and the entire wall in eight and ten cases, respectively, and anastomosed at the anterior nasal spine and the infraorbital foramen. The descending palatine artery presented as a single trunk in four cases, a greater palatine artery and a lower palatine artery in 18 cases, and four branches in two cases. Intraosseous and periosteal anastomoses were found along with anastomosis through the incisive foramen, which were obstructed in three cases. The vascular territories were studied. The maxillary artery created an intraosseous and periosteal anastomotic network, explaining the supply pathways during different surgical procedures, risk of hemorrhage with orthognathic surgery (Le Fort type I) in a sinus lift for preimplant surgery, and the vascular territories.

Maxillary sinus balloon lifting and deferred implantation of 50 osseointegrated implants: a prospective, observational, non-controlled study.

The aim of this study was to assess the effectiveness of minimally invasive antral membrane balloon elevation (MIAMBE). Twenty-seven patients with severe resorption of the posterior maxilla were treated by balloon catheter-assisted sinus lift procedure with deferred implant placement. Panoramic radiographs and computed tomography scans were obtained prior to surgery and at 6 months after surgery, before implantation. Data collected following surgery included inflammation, pain, bleeding, infection, and haematoma. Pain and inflammation were recorded using a six-point verbal rating scale (VRS). The patients were followed up for an average of 15 months. The initial sinus floor height was measured for each planned implant and compared with the height at 6 months post-surgery. The average bone height gain was 8.10±3.45mm (range 0.5-13.95mm). Inflammation on the VRS ranged from 0 to 3 (mean 0.97±0.85), while pain ranged from 0 to 4 (mean 0.87±1.19). There was a perforation of the Schneiderian membrane smaller than 2mm in one case. In another case, the balloon lift procedure had to be aborted and changed to the conventional Tatum technique due to breakage of the balloon inside the sinus. The results of this study show the balloon sinus lift technique to be an easy procedure to perform, with apparently low rates of inflammation and pain, and to provide sufficient quantity and quality of bone for the placement of osseointegrated implants.

Clinical and histomorphometric outcome in future site development performed with a nano-hydroxyapatite through hydraulic sinus lift technique.

PURPOSE: The crestal sinus lifting by means of hydraulic technique associated with a nano-cristalline hydroxyapatite in an aqueous medium is investigated. MATERIALS AND METHODS: A specific purpose-made instrument is used, consisting of a syringe with a micrometrically controlled piston connected to a dispenser used to inject, in a calibrated and precise manner, noted volumes of graft material into the sub-schneiderian space. Adopting such a technique the Authors performed 7 future site developments, on 7 patients (2 males; 5 females; mean age 49.29±8.08 years), using a nanocrystalline hydroxyapatite. In the second stage, performed at 5.71±1.52 months, 7 implants were placed, after harvesting bone biopsies from the regenerated sites. The samples underwent histological and histomorphometric analysis. RESULTS: The average percentage of vital bone was of 33.27±5.98%, while the bone marrow and graft material were 60.84±5.93% and 5.87±3.05%, respectively. CONCLUSIONS: The results confirm the effectiveness of this method in restoring bone volume in the sub-antral region. Furthermore nano-cristalline hydroxyapatite is a proper material for sinus floor augmentation.

Evaluación de la arteria alveolo-antral mediante tomografía volumétrica en población mexicana y su relación con levantamiento del piso del seno maxilar / CBCT evaluation of the alveolar antral artery in a mexican cohort and its relationship to maxillary sinus floor lifting

Introducción: El conocimiento de la anatomía de la región maxilar debe ser esencial para el cirujano antes de realizar levantamiento del seno maxilar para evitar complicaciones. La arteria alveolo antral forma una anastomosis intraósea con la arteria infraorbitaria a nivel de la pared antero lateral del seno maxilar, aproximadamente a una distancia de entre 18.9 y 19.6 mm desde el reborde alveolar maxilar. La arteria alveolo antral es la encargada de dar vascularidad a la membrana mucosa del seno maxilar, pared antero lateral del seno y tejido perióstico subyacente.Objetivo: Describir y establecer la frecuencia, diámetro y localización dela anastomosis entre la arteria infraorbitaria y la arteria alveolar posterior superior, llamada arteria alveolo antral y su relación con la cresta ósea alveolar en una población mexicana. Material y métodos: Se realizaun protocolo de estudio observacional, descriptivo y transversal en una población de 1,116 pacientes derecho habientes del Instituto de Seguridad Social y Servicios para los Trabajadores del Estado (ISSSTE), en el oriente de la Ciudad de México, mediante la revisión de estudios de tomografía volumétrica computarizada. Resultados: Se encuentra la anastomosis arterial en el 90 por ciento de los estudios revisados, correspondiente a 1,005 estudios de tomografía.

Introduction: In order to avoid complications, it is essential for surgeonsto have a detailed knowledge of the anatomy of the superior maxillarybone prior to performing any sinus lift procedure. The alveolarantral artery forms an intraosseous anastomosis with the infraorbitalartery at the level of the anterolateral wall of the maxillary antrum at anapproximate distance of between 18.9 and 19.6 mm from the maxillaryalveolar ridge. The alveolar antral artery is responsible for providingvascularity to the mucous membrane of the maxillary sinus, the anteriorlateral wall of the sinus, and the underlying periosteal tissue. Objective:To analyze and establish the frequency, diameter, and locationof the anastomosis between the infraorbital artery and the posteriorsuperior alveolar artery known as the alveolar antral artery, and itsrelationship to the alveolar bone crest in a Mexican cohort. Materialand methods. We conducted a cross-sectional observational descriptivestudy involving a cohort comprised of 1,116 patients of the Institute forSocial Security and Services for State Workers (ISSSTE) on the eastside of Mexico City. The study consisted of a review of CBCT studies.Results: The arterial anastomosis was found in 90% of the 1,005 CBCTstudies reviewed, based on which the following values were determinedfor the distance between the alveolar ridge and the canal of the alveolarantral artery: for the fi rst premolar, 18.24 mm; second premolar,17.35 mm; fi rst molar, 16.96 mm, and for the second molar, 18.75 mm.Conclusions: We established the average measurements for the locationof the vascular bundle in question and the measurements neededto safeguard it along its course, which is important for the preservationand osseointegration of bone grafts placed during maxillary sinus liftprocedures, thus providing a margin of safety not previously reportedin the literature for a Mexican cohort.

Bone Formation in Maxillary Sinus Lift Using Autogenous Bone Graft at 2 and 6 Months.

The aim of this study is to compare the bone formation in maxillary sinus lift with an autogenous bone graft in histological evaluation at 2 or 6 months. A comparative study was designed where 10 patients with missing teeth bilaterally in the posterior zone of the maxilla were selected. Patients received a particulate autogenous bone graft under the same surgical conditions, selecting a site to collect a biopsy and histological study at two months and another at six months postoperatively. Histomorphometry was performed and were used Kolmogorov-Smirnov test, student's t-test and Spearman's correlation coefficient, considering a value of p<0.05. Differences were observed in inflammatory infiltrate and vascularization characteristics; however, the group analyzed at two months presented 38.12% ± 6.64 % of mineralized tissue, whereas the group studied at 6 months presented an average of 38.45 ± 9.27 %. There were no statistical differences between the groups. It is concluded that the bone formation may be similar in intrasinus particulate autogenous bone grafts in evaluations at two or six months; under these conditions, early installation of implants is viable.