Revisiting the Ultraviolet Absorption Cross Section of Gaseous Nitrous Acid (HONO): New Insights for Atmospheric HONO Budget.

Nitrous acid (HONO) is an important source of hydroxyl radicals (OH) in the atmosphere. Precise determination of the absolute ultraviolet (UV) absorption cross section of gaseous HONO lays the basis for the accurate measurement of its concentration by optical methods and the estimation of HONO loss rate through photolysis. In this study, we performed a series of laboratory and field intercomparison experiments for HONO measurement between striping coil-liquid waveguide capillary cell (SC-LWCC) photometry and incoherent broadband cavity-enhanced absorption spectroscopy (IBBCEAS). Specified HONO concentrations prepared by an ultrapure standard HONO source were utilized for laboratory intercomparisons. Results show a consistent ∼22% negative bias in measurements of the IBBCEAS compared with a SC-LWCC photometer. It is confirmed that the discrepancies occurring between these techniques are associated with the overestimation of the absolute UV absorption cross sections through careful analysis of possible uncertainties. We quantified the absorption cross section of gaseous HONO (360-390 nm) utilizing a custom-built IBBCEAS instrument, and the results were found to be 22-34% lower than the previously published absorption cross sections widely used in HONO concentration retrieval and atmospheric chemical transport models (CTMs). This suggests that the HONO concentrations retrieved by optical methods based on absolute absorption cross sections may have been underestimated by over 20%. Plus, the daytime loss rate and unidentified sources of HONO may also have evidently been overestimated in pre-existing studies. In summary, our findings underscore the significance of revisiting the absolute absorption cross section of HONO and the re-evaluation of the previously reported HONO budgets.

A review of the characteristics of rainfall simulators in soil erosion research studies.

Rainfall simulators are widely employed in soil erosion studies, and it is common for these simulators to be customized to address specific research questions. Nevertheless, there are certain characteristics that rainfall simulators should fulfill in the context of soil erosion studies. Rainfall simulators should simulate natural precipitation as accurately as possible. It is essential to monitor the size spectrum of generated raindrops, their maximum or terminal velocity, the uniformity of the surface distribution of rain, the kinetic energy and the overall intensity of the rain. This review aims to outline the characteristics and the corresponding measurement methods for rainfall simulators in soil erosion research. Electronic instruments like distrometers are considered more suitable for precise and comprehensive measurements than traditional instroments or literature based derivatives. By adhering to these characteristics, researchers can ensure the reliability and accuracy of their findings. Consequently, this overview serves as a valuable resource for researchers seeking to employ rainfall simulators in their investigations of soil erosion.

Response of the GE Entropy™ monitor to neuromuscular block in awake volunteers.

BACKGROUND: The GE Entropy™ monitor analyses the frontal electroencephalogram (EEG) and generates two indices intended to represent the degree of anaesthetic drug effect on the brain. It is frequently used in the context of neuromuscular block. We have shown that a similar device, the Bispectral Index monitor (BIS), does not generate correct values in awake volunteers when neuromuscular blocking drugs are administered. METHODS: We replayed the EEGs recorded during awake paralysis from the original study to an Entropy monitor via a calibrated electronic playback system. Each EEG was replayed 30 times to evaluate the consistency of the Entropy output. RESULTS: Both State Entropy and Response Entropy decreased during periods of neuromuscular block to values consistent with anaesthesia, despite there being no change in conscious state (State Entropy <60 in eight of nine rocuronium trials and nine of 10 suxamethonium trials). Entropy values did not return to pre-test levels until after the return of movement. Entropy did not generate exactly the same results when the same EEG was replayed multiple times, which is primarily because of a cyclical state within the Entropy system itself. CONCLUSIONS: The GE Entropy™ monitor requires muscle activity to generate correct values in an awake subject. It could therefore be unreliable at detecting awareness in patients who have been given neuromuscular blocking drugs. In addition, Entropy does not generate the same result each time it is presented with the same EEG.

Evidence in Clinical Studies for the Role of Wall Thickness in Ascending Thoracic Aortic Aneurysms: A Scoping Review.

BACKGROUND: Ascending thoracic aortic aneurysm is a chronic degenerative pathology characterized by dilatation of this segment of the aorta. Clinical guidelines use aortic diameter and growth rate as predictors of rupture and dissection. However, these guidelines neglect the effects of tissue remodeling, which may affect wall thickness. The present study aims to systematically review observational studies to examine to what extent wall thickness is considered and measured in clinical practice. METHODS: Using PubMed and Web of Science, studies were identified with data on ascending aortic wall thickness, morphology, aortic diameter, and measurement techniques. RESULTS: 15 included studies report several methods by which wall thickness is measured. No association was observed between wall thickness and aortic diameter across included studies. Wall thickness values appear not materially different between aneurysmatic aortas and non-aneurysmal aortas. CONCLUSIONS: The effects on and consequences of wall thickness changes during ATAA formation are ill-defined. Wall thickness values for aneurysmatic aortas can be similar to aortas with normal diameters. Given the existing notion that wall thickness is a determinant of mechanical stress homeostasis, our review exposes a clear need for consistent as well as clinically applicable methods and studies to quantify wall thickness in ascending aortic aneurysm research.

Measurement of atmospheric nanoparticles: Bridging the gap between gas-phase molecules and larger particles.

Atmospheric nanoparticles are crucial components contributing to fine particulate matter (PM2.5), and therefore have significant effects on visibility, climate, and human health. Due to the unique role of atmospheric nanoparticles during the evolution process from gas-phase molecules to larger particles, a number of sophisticated experimental techniques have been developed and employed for online monitoring and characterization of the physical and chemical properties of atmospheric nanoparticles, helping us to better understand the formation and growth of new particles. In this paper, we firstly review these state-of-the-art techniques for investigating the formation and growth of atmospheric nanoparticles (e.g., the gas-phase precursor species, molecular clusters, physicochemical properties, and chemical composition). Secondly, we present findings from recent field studies on the formation and growth of atmospheric nanoparticles, utilizing several advanced techniques. Furthermore, perspectives are proposed for technique development and improvements in measuring atmospheric nanoparticles.

The 50 most cited studies on posterior tibial slope in joint preserving knee surgery.

PURPOSE: To determine the 50 most cited studies on posterior tibial slope (PTS) in joint preserving knee surgery and assess their level of evidence, objective study quality scores as well as to examine whether the study quality correlated with the citation count and citation density in the top 50 list. METHODS: A literature search on Web of Science was performed to determine the 50 most cited studies on the topic of PTS in joint preserving knee surgery between 1990 and 2022. The studies were evaluated for their bibliographic parameters, level of evidence rating (LOE), citation counts, the Modified Coleman Methodological Score (MCMS), the Methodological Index for Non-Randomized Studies (MINORS), and the Radiologic Methodology and Quality Scale (MQCSRE). RESULTS: Of the top 50 list, 16 studies were published in the American Journal of Sports Medicine. A total of 23 studies were produced in the United States (46%). Of 10 different study types, case control studies (n = 16, 32%) and cadaveric studies (n = 10, 20%) were most common. 15 studies (30%) were purely radiological studies. 6 studies were level II (12%), 23 level III (46%), 15 level IV (30%), and 6 level V studies (12%), respectively. The number of citations ranged from 42 to 447 (mean 105.6 ± 79.2 citations) and showed a mean citation density of 10.3 ± 5.2, composed of the decades 1994 - 2000 (8.3 ± 4.1), 2001 - 2010 (11.1 ± 5.9), 2011 - 2019 (10.1 ± 5.1). Mean quality scores were 55.9 ± 13.0 for MCMS (n = 18), 14.5 ± 3.2 for MINORS (n = 18) and 18.1 ± 3.7 for MQCSRE (n = 20), respectively. High citation counts did not correlate with higher study quality scores (p > 0.05). Radiological studies were not significantly cited more often than non-radiological studies (mean 116.9 ± 88.3 vs. 100.8 ± 75.8 citations; p > 0.05). CONCLUSION: In joint preserving knee surgery, the 50 most cited studies on PTS did not represent a ranking of the highest methodological quality scores. Citation counts and citation density over the past three decades did not significantly differ, even though the number of articles in the presented list multiplied over the same period. This list can serve as a reference tool for orthopedic surgeons aiming to review PTS literature.

Modelling coronary flows: impact of differently measured inflow boundary conditions on vessel-specific computational hemodynamic profiles.

BACKGROUND AND OBJECTIVES: The translation of hemodynamic quantities based on wall shear stress (WSS) or intravascular helical flow into clinical biomarkers of coronary atherosclerotic disease is still hampered by the assumptions/idealizations required by the computational fluid dynamics (CFD) simulations of the coronary hemodynamics. In the resulting budget of uncertainty, inflow boundary conditions (BCs) play a primary role. Accordingly, in this study we investigated the impact of the approach adopted for in vivo coronary artery blood flow rate assessment on personalized CFD simulations where blood flow rate is used as inflow BC. METHODS: CFD simulations were carried out on coronary angiograms by applying personalized inflow BCs derived from four different techniques assessing in vivo surrogates of flow rate: continuous thermodilution, intravascular Doppler, frame count-based 3D contrast velocity, and diameter-based scaling law. The impact of inflow BCs on coronary hemodynamics was evaluated in terms of WSS- and helicity-based quantities. RESULTS: As main findings, we report that: (i) coronary flow rate values may differ based on the applied flow derivation technique, as continuous thermodilution provided higher flow rate values than intravascular Doppler and diameter-based scaling law (p = 0.0014 and p = 0.0023, respectively); (ii) such intrasubject differences in flow rate values lead to different surface-averaged values of WSS magnitude and helical blood flow intensity (p<0.0020); (iii) luminal surface areas exposed to low WSS and helical flow topological features showed robustness to the flow rate values. CONCLUSIONS: Although the absence of a clinically applicable gold standard approach prevents a general recommendation for one coronary blood flow rate derivation technique, our findings indicate that the inflow BC may impact computational hemodynamic results, suggesting that a standardization would be desirable to provide comparable results among personalized CFD simulations of the coronary hemodynamics.

Measurement Techniques for Leg Length Discrepancy in Total Hip Arthroplasty: A Systematic Review of Reliability and Validity.

BACKGROUND: Total hip arthroplasty (THA) carries a substantial litigative burden. THA may introduce leg length discrepancy (LLD), necessitating a valid and reliable technique for LLD measurement. This study investigates the reliability and validity of techniques quantitively measuring LLD in both pre- and post-THA. METHODS: Embase and MEDLINE databases were searched following Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines for articles assessing either the validity or reliability of LLD measurement techniques. Data was pooled using random effects meta-analysis to derive reliability estimates. Study quality was assessed using the Brink and Louw checklist. RESULTS: Forty-two articles with 2059 participants were included. Thirty-three investigated reliability and 25 validity. Reliability displayed high heterogeneity. Poor to excellent intra-rater reliability was reported for antero-posterior pelvis radiographs, moderate to excellent for computed tomography scanograms, and good to excellent for clinical methods and teleradiography, and excellent for bi-planar radiography (BPR). Poor to excellent inter-rater reliability was reported for antero-posterior pelvis radiographs and clinical methods, moderate to excellent for teleradiography, good to excellent for computed tomography scanogram and excellent for BPR. The tape measure method is a valid clinical measure of LLD whilst markerless motion analysis and the block method are not. Imaging techniques are appropriately cross-validated with the exception of BPR. CONCLUSION: The reported intra- and inter-rater reliability for most measurement techniques vary widely. The tape measure method is a valid clinical measurement of LLD. Imaging techniques have been appropriately cross-validated, with the exception of BPR, although they lack validation against a common reference technique.

Accuracy of pulse oximeters in measuring oxygen saturation in patients with poor peripheral perfusion: a systematic review.

One of the most significant limitations of oximeters is their performance under poor perfusion conditions. This systematic review examines pulse oximeter model accuracy in adults under poor perfusion conditions. A multiple database search was conducted from inception to December 2020. The inclusion criteria were as follows: (1) adult participants (> 18 years) with explicitly stated conditions that cause poor peripheral perfusion (conditions localized at the oximeter placement site; or systemic conditions, including critical conditions such as hypothermia, hypotension, hypovolemia, and vasoconstricting agents use; or experimental conditions) (2) a comparison of arterial oxygen saturation and arterial blood gas values. A total of 22 studies were included and assessed for reliability and agreement using a modified Guidelines for Reporting Reliability and Agreement Studies tool. We calculated the accuracy root mean square error from bias and precision we extracted from the studies. Most oximeters (75%) were deemed accurate in patients with poor perfusion. Modern oximeters utilizing more complex algorithms were more likely to be accurate than older models. Earlobe placement of oximeters seemed more sensitive, with greater measurement accuracy, than on fingertip placement. Only one study controlled for skin pigmentation, and none strictly followed Food and Drug Association recommendations for experiments to determine oximeter accuracy. Oximeters are accurate in poorly perfused patients, especially newer oximeter models and those placed on earlobes. Further studies are needed that examine multiple oximeter models used on a diverse selection of patients while following FDA recommendations to examine oximeter accuracy.

Accuracy of pulse pressure variations for fluid responsiveness prediction in mechanically ventilated patients with biphasic positive airway pressure mode.

The accuracy of pulse pressure variation (PPV) to predict fluid responsiveness using pressure-controlled (PC) instead of volume-controlled modes is under debate. To specifically address this issue, we designed a study to evaluate the accuracy of PPV to predict fluid responsiveness in severe septic patients who were mechanically ventilated with biphasic positive airway pressure (BIPAP) PC-ventilation mode. 45 patients with sepsis or septic shock and who were mechanically ventilated with BIPAP mode and a target tidal volume of 7-8 ml/kg were included. PPV was automatically assessed at baseline and after a standard fluid challenge (Ringer's lactate 500 ml). A 15% increase in stroke volume (SV) defined fluid responsiveness. The predictive value of PPV was evaluated through a receiver operating characteristic (ROC) curve analysis and "gray zone" statistical approach. 20 (44%) patients were considered fluid responders. We identified a significant relationship between PPV decrease after volume expansion and SV increase (spearman ρ = - 0.5, p < 0.001). The area under ROC curve for PPV was 0.71 (95%CI 0.56-0.87, p = 0.007). The best cut-off (based on Youden's index) was 8%, with a sensitivity of 80% and specificity of 60%. Using a gray zone approach, we identified that PPV values comprised between 5 and 15% do not allow a reliable fluid responsiveness prediction. In critically ill septic patients ventilated under BIPAP mode, PPV appears to be an accurate method for fluid responsiveness prediction. However, PPV values comprised between 5 and 15% constitute a gray zone that does not allow a reliable fluid responsiveness prediction.

Beyond the Ångström Exponent: Probing Additional Information in Spectral Curvature and Variability of In Situ Aerosol Hyperspectral (0.3-0.7 µm) Optical Properties.

Ångström exponents (α) allow reconstruction of aerosol optical spectra over a broad range of wavelengths from measurements at two or more wavelengths. Hyperspectral measurements of atmospheric aerosols provide opportunities to probe measured spectra for information inaccessible from only a few wavelengths. Four sets of hyperspectral in situ aerosol optical coefficients (aerosol-phase total extinction, σ ext, and absorption, σ abs; liquid-phase soluble absorption from methanol, σ MeOH-abs, and water, σ DI-abs, extracts) were measured from biomass burning aerosols (BBAs). Hyperspectral single scattering albedo (ω), calculated from σ ext and σ abs, provide spectral resolution over a wide spectral range rare for this optical parameter. Observed spectral shifts between σ abs and σ MeOH-abs/σ DI-abs argue in favor of measuring σ abs rather than reconstructing it from liquid extracts. Logarithmically transformed spectra exhibited curvature better fit by second-order polynomials than linear α. Mapping second order fit coefficients (a 1, a 2) revealed samples from a given fire tended to cluster together, that is, aerosol spectra from a given fire were similar to each other and somewhat distinct from others. Separation in (a 1, a 2) space for spectra with the same α suggest additional information in second-order parameterization absent from the linear fit. Spectral features found in the fit residuals indicate more information in the measured spectra than captured by the fits. Above-detection σ MeOH-abs at 0.7 µm suggests assuming all absorption at long visible wavelengths is BC to partition absorption between BC and brown carbon (BrC) overestimates BC and underestimates BrC across the spectral range. Hyperspectral measurements may eventually discriminate BBA among fires in different ecosystems under variable conditions.

The Use of Smartphone Photogrammetry to Digitise Transtibial Sockets: Optimisation of Method and Quantitative Evaluation of Suitability.

The fit of a lower limb prosthetic socket is critical for user comfort and the quality of life of lower limb amputees. Sockets are conventionally produced using hand-crafted patient-based casting techniques. Modern digital techniques offer a host of advantages to the process and ultimately lead to improving the lives of amputees. However, commercially available scanning equipment required is often expensive and proprietary. Smartphone photogrammetry could offer a low cost alternative, but there is no widely accepted imaging technique for prosthetic socket digitisation. Therefore, this paper aims to determine an optimal imaging technique for whole socket photogrammetry and evaluate the resultant scan measurement accuracy. A 3D printed transtibial socket was produced to create digital and physical twins, as reference models. The printed socket was photographed from 360 positions and simplified genetic algorithms were used to design a series of experiments, whereby a collection of photos were processed using Autodesk ReCap. The most fit technique was used to assess accuracy. The accuracy of the socket wall volume, surface area and height were 61.63%, 99.61% and 99.90%, respectively, when compared to the digital reference model. The scanned model had a wall thickness ranging from 2.075 mm at the top to 7.758 mm towards the base of the socket, compared to a consistent thickness of 2.025 mm in the control model. The technique selected did not show sufficient accuracy for clinical application due to the degradation of accuracy nearer to the base of the socket interior. However, using an internal wall thickness estimation, scans may be of sufficient accuracy for clinical use; assuming a uniform wall thickness.

Nuevas técnicas para medir el nivel de actividad física en estudios epidemiológicos sobre enfermedades no transmisibles en Cuba / New techniques to measure physical activity levels in epidemiological studies about non-communicable diseases in Cuba

Introducción: Los estudios epidemiológicos sobre enfermedades no transmisibles en Cuba requieren técnicas que determinen el nivel de actividad física de manera práctica, válida, confiable y costo-efectiva. Objetivo: Caracterizar las técnicas que miden el nivel de actividad física de cuestionarios validados por sensores de movimiento y que resulten aplicables en la población cubana. Métodos: La búsqueda se efectuó a través de bases de datos PubMed, Cochrane, LILACS y SciELO. Las palabras utilizadas en la búsqueda fueron: actividad física, actividad física/técnicas de medición, actividad física/cuestionario, inactividad física y enfermedades no transmisibles. Se consultaron documentos que hubiesen sido publicados en el periodo 2014-2019. Análisis e integración de la información: Se identificaron 66 artículos, de los cuales se seleccionaron 36 que contribuyeron al resultado final. Se describieron las características más relevantes de cada técnica, así como también las semejanzas y diferencias entre ellas. Basado en los criterios de los autores referidos y el de los autores, se definió cuál sería la técnica apropiada a utilizar. Conclusiones: Se considera que los podómetros junto con la versión corta del Cuestionario Internacional de Actividad Física (IPAQ, siglas en inglés), son las técnicas que pueden utilizarse para medir el nivel de actividad física en la población cubana(AU)

Introduction: Epidemiological studies about non-communicable diseases in Cuba require techniques that determine physical activity levels in a practical, valid, reliable and cost-effective manner. Objective: Characterize the techniques that measure the level of physical activity of questionnaires validated by movement sensors and that are applicable in the Cuban population. Methods: A search was conducted in the databases PubMed, Cochrane, LILACS and SciELO, using the descriptors physical activity, physical activity / measurement techniques, physical activity / questionnaire, physical inactivity and non-communicable diseases. The documents consulted had been published in the period 2014-2019. Data analysis and integration: A total 66 articles were identified, of which 36 were selected that contributed to the final result. A description was performed of the most relevant characteristics of each technique, as well as the similarities and differences between them. Determination was made of the appropriate technique to be used, based on criteria issued by article authors and referred authors. Conclusions: Pedometers and the short International Physical Activity Questionnaire (IPAQ) were selected as the techniques to be used to measure physical activity levels in the Cuban population(AU)

A Multichannel Strain Measurement Technique for Nanomodified Smart Cement-Based Sensors in Reinforced Concrete Structures.

Nanomodified smart cement-based sensors are an emerging self-sensing technology for the structural health monitoring (SHM) of reinforced concrete (RC) structures. To date, several literature works demonstrated their strain-sensing capabilities, which make them suited for damage detection and localization. Despite the most recent technological improvements, a tailored measurement technique allowing feasible field implementations of smart cement-based sensors to concrete structures is still missing. In this regard, this paper proposes a multichannel measurement technique for retrieving strains from smart cement-based sensors embedded in RC structures using a distributed biphasic input. The experiments performed for its validation include the investigation on an RC beam with seven embedded sensors subjected to different types of static loading and a long-term monitoring application on an RC plate. Results demonstrate that the proposed technique is effective for retrieving time-stable simultaneous strain measurements from smart cement-based sensors, as well as for aiding the identification of the changes in their electrical outputs due to the influence of environmental effects variable over time. Accordingly, the proposed multichannel strain measurement technique represents a promising approach for performing feasible field implementations of smart cement-based sensors to concrete structures.

Los cuestionarios como herramienta en la medición de la actividad física en personas con diabetes mellitus y obesidad en la población cubana / Questionnaires as a tool to measure physical activity in people with diabetes mellitus and obesity in the Cuban population

Introducción: Los cuestionarios son instrumentos estandarizados que se utilizan en la vigilancia global de la actividad física en las personas con diabetes mellitus y obesidad. Estos constituyen una técnica costo-efectiva más viable pero menos precisa en comparación con los métodos objetivos que se utilizan para medir la actividad física a nivel poblacional. Sin embargo, son la herramienta más empleada por los especialistas por su interacción directa con los pacientes que se incluyen en las investigaciones sobre la diabetes y la obesidad. Objetivos: Identificar los cuestionarios como una opción factible en Cuba para medir el nivel de actividad física en estudios epidemiológicos en personas con diabetes mellitus y obesidad. Métodos: Se realizó una revisión integradora de la bibliografía durante el periodo 2013-2020, a partir de los criterios de inclusión. La búsqueda se efectuó a través de PubMed, Cochrane, LILIACS y SciELO. Las palabras o criterios empleados fueron: actividad física, actividad física/cuestionarios, actividad física/técnicas de medición, enfermedades no transmisibles, diabetes mellitus y obesidad. Se identificaron 68 artículos, de los cuales fueron seleccionados 29 que contribuyeron al resultado final. Conclusiones: Las nuevas evidencias expuestas propician elementos sólidos para identificar los cuestionarios validados por sensores de movimiento como una opción factible que debe ser utilizada en Cuba para medir el nivel de actividad física en estudios epidemiológicos en personas con diabetes mellitus y obesidad(AU)

Introduction: The questionnaires are standardized instruments, which are used in full monitoring of physical activity in people with diabetes mellitus and obesity. They are a more viable cost-effect technique, but less precise in comparison with the objective methods that are used to measure physical activity in the population level. However, they are the most used tool by the specialists due to its direct interaction with patients included in researches on diabetes and obesity. Objectives: Identify the questionnaires as a feasible option in Cuba to measure the level of physical activity in epidemiological studies in people with diabetes mellitus and obesity. Methods: An integrative review of the bibliography was carried out from the inclusion criteria during the period 2013-2020. The search was carried out through PubMed, Cochrane, LILACS and SciELO to answer the question of the review: What is the physical activity´s measurement technique that can be used in people with diabetes mellitus and obesity in the Cuban population, taking into account the new empirical evidence on the subject? Physical activity, physical activity / questionnaires, physical activity / measurement techniques, non-communicable diseases, diabetes mellitus and obesity; were the words or criteria used. 68 articles were identified, and 29 of them were selected so, they contributed to the final result. Conclusions: The new evidences presented provide solid elements to identify the questionnaires validated by motion sensors as a feasible option that should be used in Cuba to measure the level of physical activity in epidemiological studies of people with diabetes mellitus and obesity(AU)

On the Relationship between Spatial Coherence and In Situ Pressure for Abdominal Imaging.

Tissue harmonic signal quality has been shown to improve with elevated acoustic pressure. The peak rarefaction pressure (PRP) for a given transmit, however, is limited by the Food and Drug Administration guidelines for mechanical index. We have previously demonstrated that the mechanical index overestimates in situ PRP for tightly focused beams in vivo, due primarily to phase aberration. In this study, we evaluate two spatial coherence-based image quality metrics-short-lag spatial coherence and harmonic short-lag spatial coherence-as proxy estimates for phase aberration and assess their correlation with in situ PRP in simulations and experiments when imaging through abdominal body walls. We demonstrate strong correlation between both spatial coherence-based metrics and in situ PRP (R2 = 0.77 for harmonic short-lag spatial coherence, R2 = 0.67 for short-lag spatial coherence), an observation that could be leveraged in the future for patient-specific selection of acoustic output.

Quantifying the Effect of Abdominal Body Wall on In Situ Peak Rarefaction Pressure During Diagnostic Ultrasound Imaging.

In this study, 3-D non-linear ultrasound simulations and experimental measurements were used to estimate the range of in situ pressures that can occur during transcutaneous abdominal imaging and to identify the sources of error when estimating in situ peak rarefaction pressures (PRPs) using linear derating, as specified by the mechanical index (MI) guideline. Using simulations, it was found that, for a large transmit aperture (F/1.5), MI consistently over-estimated in situ PRP by 20%-48% primarily owing to phase aberration. For a medium transmit aperture (F/3), the MI accurately estimated the in situ PRP to within 8%. For a small transmit aperture (F/5), MI consistently underestimated the in situ PRP by 32%-50%, with peak locations occurring 1-2 cm before the focal depth, often within the body wall itself. The large variability across body wall samples and focal configurations demonstrates the limitations of the simplified linear derating scheme. The results suggest that patient-specific in situ PRP estimation would allow for increases in transmit pressures, particularly for tightly focused beams, to improve diagnostic image quality while ensuring patient safety.

Mapping the Metabolic Networks of Tumor Cells and Cancer-Associated Fibroblasts.

Metabolism is considered to be the core of all cellular activity. Thus, extensive studies of metabolic processes are ongoing in various fields of biology, including cancer research. Cancer cells are known to adapt their metabolism to sustain high proliferation rates and survive in unfavorable environments with low oxygen and nutrient concentrations. Hence, targeting cancer cell metabolism is a promising therapeutic strategy in cancer research. However, cancers consist not only of genetically altered tumor cells but are interwoven with endothelial cells, immune cells and fibroblasts, which together with the extracellular matrix (ECM) constitute the tumor microenvironment (TME). Cancer-associated fibroblasts (CAFs), which are linked to poor prognosis in different cancer types, are one important component of the TME. CAFs play a significant role in reprogramming the metabolic landscape of tumor cells, but how, and in what manner, this interaction takes place remains rather unclear. This review aims to highlight the metabolic landscape of tumor cells and CAFs, including their recently identified subtypes, in different tumor types. In addition, we discuss various in vitro and in vivo metabolic techniques as well as different in silico computational tools that can be used to identify and characterize CAF-tumor cell interactions. Finally, we provide our view on how mapping the complex metabolic networks of stromal-tumor metabolism will help in finding novel metabolic targets for cancer treatment.

Propofol-Bispectral Index (BIS) Electroencephalography (EEG) Pharmacokinetic-Pharmacodynamic Model in Patients With Post-Cerebral Hemorrhage Hydrocephalus.

Background. Titrating hypnotic agents for patients who suffer from a cerebral insult is a challenging task. To date there is no real gold standard to precisely quantify electroencephalography (EEG) response in a fashion that could be utilized for patients with post-cerebral hemorrhage hydrocephaly. While we must administer "as per usual" analgesics for noxious stimuli, we have to administer the hypnotic agents more "sparingly" due to lack of objective monitoring. Methods. We compared 15 adult post-cerebral hemorrhage hydrocephalus patients undergoing ventriculo-peritoneal shunt placement with 15 controls matched for gender and approximate age. We set propofol target controlled infusion estimated plasma concentrations (Cp) to gradually reach 4 µg/mL over 4 minutes. To precisely quantify post-cerebral hemorrhage mental dysfunction, we used electronically retrieved bispectral index (BIS) and propofol Cp data points to create individual inhibitory monophasic mathematical model for each patient that incorporates an independent hysteresis "lag" function. Results. In post-cerebral hemorrhage patients Cp-BIS curve, C50 (propofol concentration associated with inhibitory 50% BIS response) cutoff point was significantly shifted to the left by 39%. Whereas before infusion and at stable propofol 4 µg/mL aneurismal surgical sides ipsilateral (75 ± 13, 25 ± 9) and contralateral (73 ± 15, 27 ± 9) mean ± SD BIS values were significantly lower than ipsilateral (95 ± 3, 46 ± 12) and contralateral (94 ± 3, 46 ± 12) matched controls. Conclusions. Using BIS as surrogate marker of propofol hypnotic effect, BIS monitoring in patients with post-cerebral hemorrhage hydrocephaly showed a pattern of change and trend that was similar albeit 39% significantly lower than subjects without.

AI technology for remote clinical assessment and monitoring.

OBJECTIVE: To report the clinical validation of an innovative, artificial intelligence (AI)-powered, portable and non-invasive medical device called Wound Viewer. The AI medical device uses dedicated sensors and AI algorithms to remotely collect objective and precise clinical data, including three-dimensional (3D) wound measurements, tissue composition and wound classification through the internationally recognised Wound Bed Preparation (WBP) protocol; this data can then be shared through a secure General Data Protection Regulation (GDPR)- and Health Insurance Portability and Accountability Act (HIPAA)-compliant data transfer system. This trial aims to test the reliability and precision of the AI medical device and its ability to aid health professionals in clinically evaluating wounds as efficiently remotely as at the bedside. METHOD: This non-randomised comparative clinical trial was conducted in the Clinica San Luca (Turin, Italy). Patients were divided into three groups: (i) patients with venous and arterial ulcers in the lower limbs; (ii) patients with diabetes and presenting with diabetic foot syndrome; and (iii) patients with pressure ulcers. Each wound was evaluated for area, depth, volume and WBP wound classification. Each patient was examined once and the results, analysed by the AI medical device, were compared against data obtained following visual evaluation by the physician and research team. The area and depth were compared with a Kruskal-Wallis one-way analysis of variations in the obtained distribution (expected p-value>0.1 for both tests). The WBP classification and tissue segmentation were analysed by directly comparing the classification obtained by the AI medical device against that of the testing physician. RESULTS: A total of 150 patients took part in the trial. The results demonstrated that the AI medical device's AI algorithm could acquire objective clinical parameters in a completely automated manner. The AI medical device reached 97% accuracy against the WBP classification and tissue segmentation analysis compared with that performed in person by the physician. Moreover, data regarding the measurements of the wounds, as analysed through the Kruskal-Wallis technique, showed that the data distribution proved comparable with the other methods of measurement previously clinically validated in the literature (p=0.9). CONCLUSION: These findings indicate that remote wound assessment undertaken by physicians is as effective through the AI medical device as bedside examination, and that the device was able to assess wounds and provide a precise WBP wound classification. Furthermore, there was no need for manual data entry, thereby reducing the risk of human error while preserving high-quality clinical diagnostic data.