ABSTRACT
OBJECTIVE： To establish the method for simultaneous determination of ephedrine hydrochloride， pseudoephedrine hydrochloride， methamphetamine hydrochloride and paeoniflorin in Xiaoqinglong granule. METHODS： Micellar capillary electrophoresis （MCE） method was adopted. The optimum conditions for the separation were as follows as a fused silica capillary column as the separation channel， the buffer solution composed of 10 mmol/L borax-10 mmol/L SDS （95 ∶ 5， pH 10.5）， detection wavelength of 195 nm， separation voltage of 20 kV， capillary column temperature of 15 ℃，the sampling at a pressure for 0.5 psi×5 s. Two batches of Xiaoqinglong granules were collected from 2 manufacturers to determine the contents of ephedrine hydrochloride， pseudoephedrine hydrochloride， methamphetamine hydrochloride and paeoniflorin. The results of content determination were compared with the results determined by HPLC method stated in Chinese Pharmacopeia of 2015 edition. RESULTS： The linear range of ephedrine hydrochloride， pseudoephedrine hydrochloride， methamphetamine hydrochloride and paeoniflorin were 10-160， 10-160， 1-100， 10-500 μg/mL （r＝0.997 9-0.999 8）， respectively. RSDs of precision， reproducibility and stability tests were all ≤2.74％ （n＝5-6）. The average recoveries were 101.55％， 101.62％， 100.15％， 101.85％ （RSD≤3.94％， n＝6）， respectively. The contents of 4 components determined by micellar capillary electrophoresis were in accordance with the results of HPLC method. CONCLUSIONS： The established MCE method is simple， quick and sensitive， and can be used for simultaneous determination of 4 components mentioned above in Xiaoqinglong granule.
ABSTRACT
Three methods are proposed for the quantitative determination of raloxifene hydrochloride in pharmaceutical dosage form: ultraviolet method (UV) high performance liquid chromatography (HPLC) and micellar capillary electrophoresis (MEKC). These methods were developed and validated and showed good linearity, precision and accuracy. Also they demonstrated to be specific and robust. The HPLC and MEKC methods were tested in regards to be stability indicating methods and they showed to have this attribute. The UV method used methanol as solvent and optimal wavelength at 284 nm, obeying Lambert-Beer law in these conditions. The chromatographic conditions for the HPLC method included: NST column C18 (250 x 4.6 mm x 5 µm), mobile phase water:acetonitrile:triethylamine (67:33:0,3 v/v), pH 3.5, flow rate 1.0 mL min-1, injection volume 20.0 µl, UV detection 287 nm and analysis temperature 30 °C. The MEKC method was performed on a fused-silica capillary (40 cm effective length x 50 µm i.d.) using as background electrolyte 35.0 mmol L-1 borate buffer and 50.0 mmol L-1 anionic detergent sodium dodecyl sulfate (SDS) at pH 8.8. The capillary temperature was 32°C, applied voltage 25 kV, UV detection at 280 nm and injection was perfomed at 45 mBar for 4 s, hydrodimanic mode. In this MEKC method, potassium diclofenac (200.0 µg mL-1) was used as internal standard. All these methods were statistically analyzed and demonstrated to be equivalent for quantitative analysis of RLX in tablets and were successfully applied for the determination of the drug...
Três métodos são propostos para a quantificação de cloridrato de raloxifeno em sua forma farmacêutica de comprimidos: espectrofotometria no ultravioleta (UV), cromatografia líquida de alta eficiência (HPLC) e eletroforese capilar micelar (MEKC). Estes métodos desenvolvidos e validados demonstraram linearidade, precisão e exatidão. Também foram específicos e robustos. Os métodos HPLC e MEKC foram desenvolvidos para indicar a estabilidade do fármaco e demonstraram ter este atributo. O método UV usou metanol como solvente e comprimento de onda de 284nm, obedecendo a Lei de Lambert-Beer nestas condições. Os parâmetros cromatográficos para o método HPLC foram: coluna NST C18 (250 x 4,6 mm x 5 µm), fase móvel composta de água:acetonitrila:trietilamina (67:33:0,3 v/v), pH 3,5, vazão da fase móvel de 1,0 mL min-1, volume de injeção de 20 µl, detecção no comprimento de onda de 287 nm e temperatura de análise de 30°C. O método MEKC foi realizado utilizando capilar de sílica fundida (40 cm de comprimento efetivo x 50 µm de diâmetro interno) usando como fase móvel solução tampão borato 35.0 mmol L-1 e solução de dodecil sulfato de sódio (SDS) 50.0 mmol L-1 pH 8,8. A temperatura de análise foi de 32 °C, com voltagem aplicada de 25 kV, detecção no comprimento de onda de 280 nm e injeção da amostra realizada a 45 mBar por 4 s em modo hidrodinâmico. Para este método MEKC, foi utilizado diclofenaco de potássio (200.0 µg mL-1) como padrão interno. Todos os métodos foram analisados estatisticamente e demostraram ser equivalentes para a análise quantitativa de raloxifeno em comprimidos e foram aplicados com sucesso na determinação do fármaco...
