Exploring access cavity through non-carious cervical lesions: Impacts on instrumentation, obturation, and fracture resistance in mandibular incisors.

AIM: To compare the effects of Cervical Access Cavity (CervAC) and Traditional Access Cavity (TradAC) on root canal preparation, root canal filling, and fracture resistance in mandibular incisors. METHODOLOGY: Twenty recently extracted and intact mandibular incisors were initially scanned using a micro-CT device. The specimens were anatomically matched to create two groups (n = 10). A wedge-shaped non-carious cervical lesion (NCCL) was created on the buccal aspect of all teeth using a double-faced segmented diamond disc. In group 1, a TradAC was prepared, whilst in group 2, access was created through the simulated NCCL using a round diamond bur 1012. After root canal preparation with Rotate instruments sizes 15/0.04, 20/0.04, and 25/0.04, the teeth were scanned again and evaluated for root canal volume and surface area, static voxels, volume of removed dental tissue, and dentine thickness. After that, the root canals were filled using the single-cone technique, teeth were restored with composite resin, and subsequently rescanned to calculate the volume of filling materials and voids. Then, the restored teeth were subjected to fracture resistance tests using a universal testing machine. Statistical comparisons between groups were performed with the Mann-Whitney test or the Student's t-test, with a statistical significance level of 5%. RESULTS: Statistical comparisons indicated no significant differences between groups in terms of root canal volume, surface area, static voxels, removed root dentine, root canal filling volume, percentage of voids, or fracture resistance load (p > .05). Conversely, teeth prepared with TradAC showed a significantly higher percentage of dental tissue removed from the crown (p = .001) and a greater volume of filling material remnants in the pulp chamber (p < .001) compared to the CervAC group. A significantly lower percentage reduction in dentine thickness was observed only on the mesial aspect of root at Level 1 in TradAC group (p = .008). CONCLUSIONS: CervAC can be considered a viable alternative approach in the presence of NCCL in mandibular incisors.

Quality of Root Canal Filling in Curved Canals Utilizing Warm Vertical Compaction and Two Different Single Cone Techniques: A Three-Dimensional Micro-Computed Tomography Study.

Statement of the Problem: Successful endodontic treatment depends on three-dimensional (3D) root canal filling to prevent the leakage of residual bacteria. Different obturation techniques with different sealers should be compared by employing advanced assessment tools. Purpose: This study compared the obturation quality of warm vertical compaction (WVC) and two different single-cone (SC) techniques using micro-computed tomography (micro-CT). Materials and Method: Thirty-three extracted maxillary molars with mesial root canal curvature of 20‒40º were prepared in vitro with One-Curve files and randomly assigned to three groups (n=11) for root canal obturation with WVC, SC technique with AH Plus sealer (SC-AH), or SC technique with SureSeal bioceramic (BC) sealer (SC-Su). The root canals underwent micro-CT examinations before and after obturation to determine the volume percentages (VPs) of voids and gaps at different distances from the apex (coronal, middle, and apical thirds). Data were analyzed by Kruskal-Wallis and Mann-Whitney U tests. Results: The highest VP of voids and gaps was recorded in the SC-Su group, with no significant difference from other groups (p> 0.05). There were significant differences in VP of gaps at different distances from the apex (p<0.05). The VPs of gaps in the apical third of all the samples were significantly higher than in the coronal and middle thirds. However, the difference in VP of voids was not significant at different distances from the apex (p>0.05). Conclusion: None of the tested techniques could provide a void-free and gap-free filling. The apical third of the canals showed the highest VP of gaps in all obturation techniques.

Total Flavonoids Isolated from the Leaves of Eucommia ulmoides Augment Peak Bone Mass in Female Rats and Show no Side Effects in Other Organs.

INTRODUCTION: Eucommia ulmoides is a unique monophyletic and tertiary relict in China and is listed as a national second-class precious protected tree species. Eucommia ulmoides, recognized as a traditional Chinese medicine, can tonify the liver and kidneys and strengthen bones and muscles. Modern pharmacological research has proved that Eucommia ulmoides has multiple osteoprotective effects, including prohibiting the occurrence of osteoporosis and arthritis and enhancing the healing of bone fractures and bone defects. AIM: To check its osteotropic effects, which may provide ideas for its potential use for the development of novel drugs to treat osteoporosis, this study evaluated the effect of total flavonoids from Eucommia ulmoides leaves (TFEL) on the acquisition of Peak Bone Mass (PBM) in young female rats. MATERIALS AND METHODS: TFEL was isolated, and its purity was confirmed by using a UV spectrophotometer. TFEL with a purity of 85.09% was administered to 6-week-old female rats by oral gavage at a low (50), mid (100), or high (200 mg/kg/d) dose, and the control group was administrated only with the same volume of water. After 13 weeks of treatment, the rats were sacrificed, and serum, different organs, and limb bones (femurs and tibias) were harvested, and the bone turnover markers, organ index, Bone Mineral Density (BMD), biomechanical property, and microstructure parameters were assayed. Furthermore, molecular targets were screened, and network pharmacology analyses were conducted to reveal the potential mechanisms of action of TFEL. RESULTS: Oral administration of TFEL for 13 weeks decreased the serum level of bone resorption marker TRACP-5b. As revealed by micro-computer tomography analysis, it elevated BMD even at a low dose (50 mg/kg/d) and improved the microstructural parameters, which were also confirmed by H&E histological staining. However, TFEL showed no effects on body weights, organ index, and micromorphology in the uterus. In our network pharmacology study, an intersection analysis screened out 64 shared targets, with quercetin, kaempferol, naringenin, and apigenin regulating the greatest number of targets associated with osteoporosis. Flavonoids in Eucommia ulmoides inhibited the occurrence of osteoporosis potentially through targeting signaling pathways for calcium, VEGF, IL-17, and NF-κB. Furthermore, AKT1, EGFR, PTGS2, VEGFA, and CALM were found to be potentially important target genes for the osteoprotective effects of flavonoids in Eucommia ulmoides. CONCLUSION: The above results suggested that TFEL can be used to elevate the peak bone mass in adolescence in female individuals, which may prevent the occurrence of postmenopausal osteoporosis, and the good safety of TFEL also suggests that it can be used as a food additive for daily life to improve the bone health.

Is the mouse nose a miniature version of a rat nose? A computational comparative study.

BACKGROUND AND OBJECTIVE: Although the mouse is a widely used animal model in biomedical research, there are few published studies on its nasal aerodynamics, potentially due to its small size. It is not appropriate to assume that mice and rats' nasal structure and airflow characteristics are the same because the ratio of nasal surface area to nasal volume and body weight is much higher in a mouse than in a rat. The aim of this work is to use anatomically accurate image-based computational fluid dynamic modeling to quantitatively reveal the characteristics of mouse nasal airflow and mass transport that haven't been detailed before and find key differences to that of rat nose, which will deepen our understanding of the mouse's physiological functions. METHODS: We created an anatomically accurate 3D computational nasal model of a B6 mouse using postmortem high-resolution micro-CT scans and simulated the airflow distribution and odor transport patterns under restful breathing conditions. The deposition pattern of airborne particles was also simulated and validated against experimental data. In addition, we calculated the gas chromatograph efficiency of odor transport in the mouse employing the theoretical plate concept and compared it with previous studies involving cat and rat models. RESULTS: Similar to the published rat model, respiratory and olfactory flow regimes are clearly separated in the mouse nasal cavity. A high-speed dorsal medial (DM) stream was observed, which enhances the delivery speed and efficiency of odor to the ethmoid (olfactory) recess (ER). The DM stream split into axial and secondary paths in the ER. However, the secondary flow in the mouse is less extensive than in the rat. The gas chromatograph efficiency calculations suggest that the rat may possess a moderately higher odorant transport efficiency than that of the mouse due to its more complex ethmoid recess structure and extensive secondary flow. However, the mouse's nasal structure seems to adapt better to varying airflow velocity. CONCLUSIONS: Due to the inherent structural disparities, the rat and mouse models exhibit moderate differences in airflow and mass transport patterns, potentially impacting their olfaction and other behavioral habits.

Comparative Evaluation of Volume and Homogeneity of Obturation with Four Different Obturation Systems Using Micro-Computed Tomography: An In vitro Study.

Aim: To evaluate and compare volume and homogeneity of the three different root canal obturation systems. Materials and Methods: Single-rooted premolar (n = 24) teeth samples were selected, and crowns were removed for standardization. Four groups are divided randomly as (n = 6), namely: For group I (single-cone gutta-percha obturation), group II (Beefill 2 in 1 obturation), group III (GuttaCore obturation), group IV (GuttaFlow bioseal obturation) and the root canal were subjected to prepare till X3 (protaper next) and subjected to micro-CT imaging. After completion of obturation, the image was taken by using micro-CT imaging. This is to evaluate the volume of filled obturation material in the canal space and the voided area sections, viz. the apical, middle, coronal, and third sections. Results: Group III (GuttaCore obturation) showed the least significant mean of the difference in relation to the volume of the canal obturation (81.148). The least mean significant difference in area of voids in the canal region for apical (0.00133), middle (0.00233), and coronal thirds (0.00533). The most statistically significant difference is in the apical and middle thirds root canal space. Conclusion: All the experimental groups showed significant differences in volume and voids in the obturation at three different levels, and the GuttaCore obturation systems occupied more of the volume with less voids in the prepared root canal space.

[Application of micro-computed tomography (µCT)in quantifying xylem vessels of broadleaved trees]. / 计算机显微断层扫描技术(µCT)åœ¨é‡åŒ–é˜”å¶æ ‘ç§å¯¼ç®¡ä¸­çš„åº”ç”¨.

Quantitative analysis of vessel characteristics at the cellular scale is of great significance for understan-ding plant adaptation strategies to environment. The direct grinding combined with stereo-microscope imaging is one of the main approaches to examine the anatomical structure of xylem (conifer tracheid and hardwood vessel) wood structure, which inevitably damages xylem cells, hindering the accurate understanding of anatomical structures. In this study, we applied X-ray micro-computed tomography (µCT) and stereo-microscope technology to quantitatively measure the diameter and area of vessels of seven Canadian broadleaved tree species (Acer saccharum, Betula papyrifera, Fraxinus americana, Ostrya virginiana, Populus grandidentata, Quercus rubra, and Carya cordiformis). We fitted the results by linear model and tested the feasibility of µCT technology in quantifying the vessel size of broadleaved species. We found that the results of the two methods for measuring vessel size were highly similar (R2=0.98). The goodness of fit of the vessel diameter results measured by the two methods for the ring-porous wood species (C. cordiformis, R2=0.98; F. americana, R2=0.96; Q. rubra, R2=0.99) was higher than that of the diffuse-porous wood species (B. papyrifera, R2=0.88; O. virginiana, R2=0.73; A. saccharum, R2=0.68; P. grandiden-tata, R2=0.88). The goodness of fit of small vessels (diameter≤200 µm, R2=0.94) measured by the two methods was higher than that of large vessels (diameter>200 µm, R2=0.92). Thus, the µCT technique provided a new non-destructive detection method for quantifying xylem vessels of broadleaved tree species.

Technologies to Study Genetics and Molecular Pathways.

Over the last few decades, the study of congenital heart disease (CHD) has benefited from various model systems and the development of molecular biological techniques enabling the analysis of single gene as well as global effects. In this chapter, we first describe different models including CHD patients and their families, animal models ranging from invertebrates to mammals, and various cell culture systems. Moreover, techniques to experimentally manipulate these models are discussed. Second, we introduce cardiac phenotyping technologies comprising the analysis of mouse and cell culture models, live imaging of cardiogenesis, and histological methods for fixed hearts. Finally, the most important and latest molecular biotechniques are described. These include genotyping technologies, different applications of next-generation sequencing, and the analysis of transcriptome, epigenome, proteome, and metabolome. In summary, the models and technologies presented in this chapter are essential to study the function and development of the heart and to understand the molecular pathways underlying CHD.

Coupled membranes: a mechanism of frequency filtering and transmission in the field cricket ear evidenced by micro-computed tomography, laser Doppler vibrometry and finite element analysis.

Many animals employ a second frequency filter beyond the initial filtering of the eardrum (or tympanal membrane). In the field cricket ear, both the filtering mechanism and the transmission path from the posterior tympanal membrane (PTM) have remained unclear. A mismatch between PTM vibrations and sensilla tuning has prompted speculations of a second filter. PTM coupling to the tracheal branches is suggested to support a transmission pathway. Here, we present three independent lines of evidence converging on the same conclusion: the existence of a series of linked membranes with distinct resonant frequencies serving both filtering and transmission functions. Micro-computed tomography (µ-CT) highlighted the 'dividing membrane (DivM)', separating the tracheal branches and connected to the PTM via the dorsal membrane of the posterior tracheal branch (DM-PTB). Thickness analysis showed the DivM to share significant thinness similarity with the PTM. Laser Doppler vibrometry indicated the first of two PTM vibrational peaks, at 6 and 14 kHz, originates not from the PTM but from the coupled DM-PTB. This result was corroborated by µ-CT-based finite element analysis. These findings clarify further the biophysical source of neuroethological pathways in what is an important model of behavioural neuroscience. Tuned microscale coupled membranes may also hold biomimetic relevance.

Therapeutic effect of Periploca forrestii on collagen-induced arthritis in rats through JAK2/Nf-κB pathway.

Background: Rheumatoid arthritis (RA) is a chronic autoimmune disease that affects the body. Periploca forrestii was a miao ethnic drug in China that was used to treat arthritis for hundreds of years. But, the therapeutic mechanism is so far unknown. Therefore, the chemical component and effect of Periploca forrestii on arthritis in rats were studied using HPLC-QTOF MS, micro-CT, and other experiments in this paper. Method: Male Sprague-Dawley rats were used to assess the in vivo activity. HPLC QTOF-MS was used to analyze the chemical profile of the P. forrestii (PF). Bovine type II collagen and Complete Freund's Adjuvant were used to stimulate and construct the collagen-induced arthritis (CIA) model. Three dosages of PF (100 mg/kg, 200 mg/kg, 400 mg/kg) were used to evaluate in vivo activity. Methotrexate was used as the positive drug. H/E staining and micro-CT methods were used to monitor the pathological changes of CIA rats. ELISA method was used to assess the serum level of immune- and inflammation-related cytokines. Immunohistochemical experiments were used to test the gene expression in JAK and Nf-κB pathways. Results: 42 compounds were identified from PF. PF administration lowered the increased spleen index compared with that of control and MTX groups, and partially restored body weight, reduced paw swelling, and arthritis score compared with the model group. Macroscopic assessment indicated inflamed paw with significant swelling in the model group, while the extent of inflammation and swelling was attenuated by both MTX and PF. H/E staining experiments demonstrated that pathological changes of synovial cells and infiltration of inflammatory cells were observed in the model group. In contrast, the MTX and PF treatment partially reversed these pathological changes. Micro-CT examination showed severe injuries and scars caused by inflammation for the model group, and in the high-dosage group (400 mg/kg) the inflammation-caused injuries and scars were dramatically ameliorated. Mechanism study showed that PF restored Nf-κB phosphorylation and JAK2 expression compared with the model group. Conclusion: P. forrestii possesses a potent effect on CIA rats. Nf-κB and JAK2 pathways are involved in its protective effect on CIA.

Comparative Analysis of Micro-Computed Tomography and 3D Micro-Ultrasound for Measurement of the Mouse Aorta.

Aortic aneurysms, life-threatening and often undetected until they cause sudden death, occur when the aorta dilates beyond 1.5 times its normal size. This study used ultrasound scans and micro-computed tomography to monitor and measure aortic volume in preclinical settings, comparing it to the well-established measurement using ultrasound scans. The reproducibility of measurements was also examined for intra- and inter-observer variability, with both modalities used on 8-week-old C57BL6 mice. For inter-observer variability, the µCT (micro-computed tomography) measurements for the thoracic, abdominal, and whole aorta between observers were highly consistent, showing a strong positive correlation (R2 = 0.80, 0.80, 0.95, respectively) and no significant variability (p-value: 0.03, 0.03, 0.004, respectively). The intra-observer variability for thoracic, abdominal, and whole aorta scans demonstrated a significant positive correlation (R2 = 0.99, 0.96, 0.87, respectively) and low variability (p-values = 0.0004, 0.002, 0.01, respectively). The comparison between µCT and USS (ultrasound) in the suprarenal and infrarenal aorta showed no significant difference (p-value = 0.20 and 0.21, respectively). µCT provided significantly higher aortic volume measurements compared to USS. The reproducibility of USS and µCT measurements was consistent, showing minimal variance among observers. These findings suggest that µCT is a reliable alternative for comprehensive aortic phenotyping, consistent with clinical findings in human data.

Exploring Automated Contouring Across Institutional Boundaries: A Deep Learning Approach with Mouse Micro-CT Datasets.

Image-guided mouse irradiation is essential to understand interventions involving radiation prior to human studies. Our objective is to employ Swin UNEt Transformers (Swin UNETR) to segment native micro-CT and contrast-enhanced micro-CT scans and benchmark the results against 3D no-new-Net (nnU-Net). Swin UNETR reformulates mouse organ segmentation as a sequence-to-sequence prediction task, using a hierarchical Swin Transformer encoder to extract features at 5 resolution levels, and connects to a Fully Convolutional Neural Network (FCNN)-based decoder via skip connections. The models were trained and evaluated on open datasets, with data separation based on individual mice. Further evaluation on an external mouse dataset acquired on a different micro-CT with lower kVp and higher imaging noise was also employed to assess model robustness and generalizability. Results indicate that Swin UNETR consistently outperforms nnU-Net and AIMOS in terms of average dice similarity coefficient (DSC) and Hausdorff distance (HD95p), except in two mice of intestine contouring. This superior performance is especially evident in the external dataset, confirming the model's robustness to variations in imaging conditions, including noise and quality, thereby positioning Swin UNETR as a highly generalizable and efficient tool for automated contouring in pre-clinical workflows.

Efficacy of WaveOne Gold and ProDesign RT systems in removing filling material: a micro-CT analysis.

The remaining filling material after retreatment can harbor bacteria and organic tissues that can influence the outcome of the therapy. AIM: The aim of this study was to evalúate, by micro-CT, the amount of filling material remaining in the root canal after its removal using WaveOne Gold or ProDesign RT. MATERIAL AND METHOD: Forty human mandibular canines were instrumented with the ProTaper Next system up to the X2 instrument (25.06) and filled with gutta-percha cones and AHPlus. Teeth were divided into 2 groups (n=20): WaveOne Gold 25.07 (WOG) and ProDesign RT 25.08 (PRT) for filling removal, after which they were scanned in a micro-CT device to quantify the volume of remaining filling material. The data were subjected to log 10 transformation, Student 's t-test was performed to account for multiple observationsper sample, significance was set at 5%. RESULTS: Student 's t-test showed that there was no difference between the two systems regarding the volume of remaining filling material in the thirds: apical (p = 0.392), middle (p = 0.065), or cervical (p = 0.918). CONCLUSIÓN: Remaining filling material was present in all groups and both systems were similar in removing root filling material in mandibular canines.

A permanencia de material obturador após o retratamento pode abrigar bactérias e tecidos orgánicos que podem influenciar o resultado da terapia. OBJETIVO: O objetivo deste estudo foi avaliar, por micro-CT, a quantidade de material obturador remanescente no canal radicular após a desobturagdo com WaveOne Gold e ProDesign RT. MATERIAL E MÉTODO: Quarenta caninos inferiores humanos foram instrumentados com o sistema ProTaper Next até o instrumento X2 (25.06) e obturados com cones de guta-percha e AHPlus. Os dentes foram divididos em dois grupos (n=20): WaveOne Gold 25.07 (WOG) e ProDesign RT 25.08 (PRT) e escaneados em micro-CT para quantificagdo do volume de material obturador remanescente. Os dados foram submetidos á transformando log 10, o teste t de Student foi realizado para contabilizar múltiplas observagoes por amostra, a significáncia foi fixada em 5%. RESULTADOS: O teste t de Student mostrou que ndo houve diferenga no volume de material obturador remanescente entre os dois sistemas nos tergos: apical (p = 0,392), médio (p = 0,065) ou cervical (p = 0,918). CONCLUSÃO: O material obturador remanescente estavapresente em todos os grupos e ambos os sistemas foram semelhantes na remogdo do material obturador radicular nos caninos inferiores.

A Cybertaxonomic Revision of the "Crocidura pergrisea" Species Complex with a Special Focus on Endemic Rocky Shrews: Crocidura armenica and Crocidura arispa (Soricidae).

The extraction of museum DNA from a unique collection of samples of the "Crocidura pergrisea" species complex, which comprises local endemics of Central and West Asia, allowed us to determine their inter- and intragroup relationships. The first step of this study was the re-evaluation of heavily damaged type specimens of C. armenica via a microcomputed-tomography-based cybertaxonomic approach (CTtax), which enabled a precise description of the species' morphology; three-dimensional models of the cybertypes were made available through the MorphoBank Repository. We developed the "AProMaDesU" pipeline on the basis of five requirements for micro-CT-based cyber-datasets in relation to mammalian collections. Our second step was a combination of several meticulous approaches to morphological investigation against a background of a cytb-based phylogeny, which helped us to make a taxonomic decision about the status of species of the "pergrisea" group, e.g., C. arispa, C. armenica, and C. serezkyensis, when the morphological results were partly incongruent with the molecular phylogeny. Nevertheless, under two assumptions, our findings preserved a separate species-level status of C. serezkyensis and C. arispa. In addition, we restored the species-level status of C. armenica. This taxonomic decision is based on our morphospace analysis, which revealed unique craniomandibular shape transformations within the rocky shrews that helped them with the transition to a new area of morphospace/trophic niches and consequently separated them from the other analyzed Crocidura groups.

A micro-computed tomographic evaluation of maxillary first molar root canal morphology in Black South Africans.

PURPOSE: This study was conducted to investigate the root canal anatomy of maxillary first molars in Black South Africans. METHODS: Micro-computed tomography was used to investigate 101 maxillary first molars (53 teeth from the right, 48 from the left; 50 male and 51 female teeth). The number of root canals in each tooth was determined, and the relationship between side, sex and age was analyzed using chi-squared test. To determine intra- and inter-observer reliability, Cohen's kappa coefficients were calculated. RESULTS: Intra- and inter-rater agreements of 96.92% and 98.08% were achieved, respectively. Most teeth contained either three or four canals, but a second, third and fourth mesio-buccal canal was found in 60.39%, 5.94% and 0.99% of teeth, respectively. The disto-buccal and palatal roots contained predominantly single canals, but additional canals were noted in 2.97% and 1.98% of teeth. Four canals were common in females and teeth on the right side often contained a second mesio-buccal canal. However, the prevalence of a third mesio-buccal canal was higher in males than in females. CONCLUSION: The teeth studied showed diversity and variations between sexes and arch sides. These findings will aid clinicians in endodontic treatment and will be applicable for educational purposes.

Comparative Effectiveness of Different Er:YAG Laser-Activated Irrigation Systems on Removing Calcium Hydroxide from Simulated Internal Root Resorption Cavities at Different Root Levels.

Objective: To investigate the effectiveness of Er:YAG laser-activated irrigation (LAI) with a short pulse duration for removing calcium hydroxide (CH) from simulated internal root resorption (IRR) cavities at three root levels. Background: Pulse duration is an important parameter during LAI, which ensures the efficiency of irradiation and the corresponding activation process. Short pulses in the range of a few microseconds enable rapid expansion and successive implosion of irrigants, resulting in distinct fluid movement. There have been few reports on CH removal efficacy from IRR cavities of different LAI systems, including those using short pulse duration. Methods: IRR cavities (1.6 mm diameter) were created at the apical, middle, and coronal root levels in 60 mandibular premolars and filled with a radiopaque CH paste. Samples were assigned to the following irrigation groups (n = 12, each): (1) LAI(P)-F, a prototype laser device that operates with short pulse duration (Morita Manufacturing) with a flat tip; (2) LAI(EA)-F, the ErwinAdverl laser device (Morita Manufacturing) with a flat tip; (3) LAI(EA)-T, the ErwinAdverl laser device with a tapered tip; (4) PIPS-T, the Lightwalker laser device (Fotona) with a tapered tip; and (5) SI, the syringe irrigation group. The laser tips were fixed at the canal entrance. The remaining CH volume and surface area were assessed in IRR cavities using micro-computed tomography and scanning electron microscopy, respectively. Data were statistically analyzed utilizing one-way analysis of variance and Tukey's test at 5% significance level. Results: The LAI(P)-F and PIPS-T groups exhibited the highest CH removal rates at three different levels (p < 0.05). The LAI(EA)-F group had a significantly better efficacy of CH removal compared with the LAI(EA)-T group at the middle level (p < 0.05). Conclusion: The LAI(P)-F and PIPS-T groups demonstrated superior efficiency in removing CH from simulated IRR cavities.

GEOMETRIC CHARACTERIZATION OF RAT URINARY BLADDER WALL DURING EX-VIVO FILLING USING MICRO-COMPUTED TOMOGRAPHY (MICRO-CT).

Current mechanical models of the bladder largely idealize the bladder as spherical with uniform thickness. This present study aims to investigate this idealization using micro-CT to generate 3D reconstructed models of rat bladders at 10-20 micrometer resolution in both voided and filled states. Applied to three rat bladders, this approach identifies shape, volume, and thickness variations under different pressures. These results demonstrate the filling/voiding process is far from the idealized spherical inflation/contraction. However, the geometry idealizations may be reasonable in cases where the filled bladder geometry is of importance, such as in studies of growth and remodeling.

Micro-CT evaluation of the presence of voids in endodontic obturation.

Identifying the presence, size, type and location of voids in an endodontic obturation is of great clinical importance because it enables evaluation of the three-dimensionality of the sealing techniques, which can be related to the success of the endodontic treatment. AIM: To analyze by micro-CT the presence of voids in lower single-rooted premolar root canal obturations prepared using the single cone and ultrasound vibration technique. MATERIALS AND METHODS: Twenty extracted single-rooted lower premolars were selected, and the root canal prepared surgically and chemically. In GROUP 1 - Without Vibration, the canal was obturated with a single cone and bioceramic, without applying vibration. In GROUP 2 - With Vibration, the gutta-percha cone inside the root canal was held with a cotton plier to which ultrasound vibration was applied for 3 periods of 3 seconds each. A micro-CT scanner was used to acquire and reconstruct images for analysis. RESULTS: No significant difference was found between obturation techniques, though there were differences between thirds, with the cervical third having a higher percentage of voids than the middle and apical thirds. CONCLUSIONS: The results suggest that the volume of closed, open and total voids does not differ between treatments with and without ultrasound vibration. In the cervical third, the highest volume of voids was related to oval geometry in the teeth evaluated.

La presencia de vacíos en la obturación endodóntica, su tamaño y el tipo y localización tiene gran importancia clínica ya que permite evaluar la tridimensionalidad de las técnicas de sellado y relacionarlas con el éxito del tratamiento endodóntico. OBJETIVO: analizar mediante microtomografía la presencia de vacíos en la obturación del conducto radicular de premolares inferiores unirradiculares, utilizando la técnica de cono único y vibración con ultrasonido. MATERIALES Y MÉTODOS: se seleccionaron 20 premolares inferiores unirradiculares a los que se les realizó la preparación quirúrgica y química del conducto radicular. Se realizó la obturación con cono único y biocerámico GRUPO 1- sin vibración. En el GRUPO 2 - con vibración se aplicó vibración por ultrasonido, se tomó del cono de gutapercha colocado en el interior del conducto con pinza de algodón que fue vibrada durante 3 períodos de 3 segundos cada uno. Las mismas fueron adquiridas y reconstruidas en un microtomógrafo para posterior análisis de las imágenes obtenidas. RESULTADOS: No se evidenciaron diferencias significativas entre ambas técnicas de obturación comparadas, pero si entre los tercios analizados, siendo el cervical el que mayor porcentaje de vacíos presenta en comparación a los cortes correspondientes al tercio medio y apical. CONCLUSIONES: Los resultados sugieren que el volumen de vacíos cerrados, abiertos y total no varía en los tratamientos donde se aplica vibración por ultrasonido. En el tercio cervical, el mayor volumen de vacíos se relaciona con la geometría oval que presentaron las piezas dentarias evaluadas en este estudio.

Hox code responsible for the pattering of the anterior vertebrae in zebrafish.

The vertebral column is a characteristic structure of vertebrates. Genetic studies in mice have shown that Hox-mediated patterning plays a key role in specifying discrete anatomical regions of the vertebral column. Expression pattern analyses in several vertebrate embryos provided correlative evidence that the anterior boundaries of Hox expression coincide with distinct anatomical vertebrae. However, because functional analyses have been limited to mice, it remains unclear which Hox genes actually function in vertebral patterning in other vertebrates. In this study, various zebrafish hox mutants were generated for loss-of-function phenotypic analysis to functionally decipher the Hox code responsible for the zebrafish anterior vertebrae between the occipital and thoracic vertebrae. We found that hox genes in HoxB- and HoxC-related clusters participate in regulating the morphology of the zebrafish anterior vertebrae. In addition, medaka hoxc6a was found to be responsible for anterior vertebral identity as in zebrafish. Based on phenotypic similarities with Hoxc6 knockout mice, our results suggest that the Hox patterning system, including at least Hoxc6, may have been functionally established in the vertebral patterning of the common ancestor of ray-finned and lobe-finned fishes.