[Phytoplankton population dynamics along the Casablanca - El Jadida Atlantic coast]. / Dynamique du peuplement phytoplanctonique le long de l'axe côtier Casablanca ­ El Jadida.

Our taxonomic study from March 2014 to November 2015 along the atlantic coast between Casablanca and El Jadida revealed that phytoplanktonic structure is mainly represented by Diatoms (Bacillariophyceae), Dinoflagellates (Dinophyceae), Silicoflagellates (Dictyophyceae) and Euglenophyceae with a clear dominance of Diatoms and Dinoflagellates. A total of 101 taxa of planktonic algae have been identified revealing a relatively diversified taxocenosis. In terms of respective diversity, the Diatoms are represented by 62 taxa (61.4%), the Dinoflagellates by 36 taxa (35.6%) whereas the other two groups of Silicoflagellates and Euglenophyceae are only represented by 3 species (3.0%). Regarding potentially toxic species, more than fifteen taxa have been identified, most of which were Dinoflagellates and Diatoms (Pseudo-nitzschia australis and Pseudo-nitzschia cuspidata). The total phytoplankton densities exhibited great spatial and temporal variations as shown by analyses of diversity (H') and equitability (E) indices at the different coast sites investigated throughout the 2014-2015 years. Massive proliferation of some toxic species (e.g. Pseudo-nitzschia australis and Pseudo-nitzschia cuspidata, Lingulodinium polyedrum, Karenia mikimotoi) was also noticed. In addition, our study revealed the presence of opportunistic species (e.g. Eutreptiella, Thalassiosira, Prorocentrum scutellum) and of the new ectoparasite Dinoflagellate Amyloodinium ocellatum for the first time in Morocco. The detection of such diversity of toxic species, sometimes with alarming concentrations, should prompt the competent authorities to broaden the spectrum and frequency of biomonitoring to uncontrolled seafood harvesting sites.

Title: Dynamique du peuplement phytoplanctonique le long de l'axe côtier Casablanca ­ El Jadida. Abstract: Notre étude taxonomique entre mars 2014 et novembre 2015 le long de la côte atlantique entre Casablanca et El Jadida a permis de déceler une flore phytoplanctonique représentée par les Diatomées, Dinoflagellés, Silicoflagellés et Euglenophycées avec une nette dominance des Diatomées et des Dinoflagellés. Au total, 101 taxons d'algues planctoniques ont été identifiés, témoignant d'une taxocénose relativement diversifiée. Dans cet ensemble, les Diatomées sont représentées par 62 taxons (61,4 %), les Dinoflagellés par 36 taxa (35,6 %) et les deux autres groupes (Silicoflagellés et Euglénophycées) ne sont représentés que par 3 espèces seulement (3,0 %). En ce qui concerne les espèces potentiellement toxiques, plus d'une quinzaine de taxons ont été identifiés dont la plupart sont des Dinoflagellés et des Diatomées (Pseudo-nitzschia australis et Pseudo-nitzschia cuspidata). L'analyse de l'évolution spatiotemporelle des indices de diversité (H') et d'équitabilité (E) révèle des fluctuations saisonnières prononcées sans montrer, pour autant, une grande analogie entre les différents sites prospectés. Par ailleurs, les densités phytoplanctoniques totales présentent de grandes variations à la fois spatiales et temporelles (sur les deux cycles annuels). La présence de proliférations massives de certaines espèces potentiellement toxiques (Pseudo-nitzschia australis et Pseudo-nitzschia cuspidata, Lingulodinium polyedrum, Karenia mikimotoi), d'une nouvelle espèce de Dinoflagellé ectoparasite pour le Maroc (Amyloodinium ocellatum) et d'autres espèces opportunistes (Eutreptiella, Thalassiosira, Prorocentrum scutellum) a été notée au cours de cette étude. La détection des espèces potentiellement toxiques, parfois à des concentrations alarmantes, devrait inciter les autorités compétentes à élargir le spectre et la fréquence de biosurveillance aux sites non contrôlés.

An evaluation of the genotoxicity and 90-day repeated dose oral toxicity in rats of Porphyridium purpureum.

Interest in microalgae products for use in food is increasing, as demands for sustainable and cost-effective food choices grow due to the escalating global population and increase in climate-related struggles with agriculture. Toxicological assessments of some species of microalgae have been conducted, but there were little data available for the oral consumption of the red microalgae Porphyridium purpureum and no data on genotoxicity. This article articulates a genotoxicity assessment and a 90-day repeated dose oral toxicity study in rats performed according to OECD guidelines. Under the experimental conditions applied, the test item did not induce gene mutations by base pair changes or frameshifts in the genome of the strains used in the bacterial reverse mutation test. Similarly, the test item did not induce structural chromosomal aberrations in V79 hamster lung cells. The test item also did not cause chromosomal damage in bone marrow of mice in the mammalian micronucleus test. The no observed adverse effect level (NOAEL) of the 90-day repeated dose oral toxicity study in rats was determined to be the highest dose tested, 3000 mg/kg bw/day. These data add to the body of evidence regarding the safety of P. purpureum for human consumption.

Comprehensive Lipidomic Analysis of Three Edible Microalgae Species Based on RPLC-Q-TOF-MS/MS.

Microalgae, integral to marine ecosystems for their rich nutrient content, notably lipids and proteins, were investigated by using reversed-phase liquid chromatography coupled with quadrupole time-of-flight mass spectrometry (RPLC-Q-TOF-MS/MS). This study focused on lipid composition in three commonly used microalgae species (Spirulina platensis, Chlorella vulgaris, and Schizochytrium limacinum) for functional food applications. The analysis unveiled more than 700 lipid molecular species, including glycolipids (GLs), phospholipids (PLs), sphingolipids (SLs), glycerolipids, and betaine lipids (BLs). GLs (19.9-64.8%) and glycerolipids (24.1-70.4%) comprised the primary lipid. Some novel lipid content, such as acylated monogalactosyldiacylglycerols (acMGDG) and acylated digalactosyldiacylglycerols (acDGDG), ranged from 0.62 to 9.68%. The analysis revealed substantial GLs, PLs, and glycerolipid variations across microalgae species. Notably, S. platensis and C. vulgaris displayed a predominance of fatty acid (FA) 18:2 and FA 18:3 in GLs, while S. limacinum exhibited a prevalence of FA 16:0, collectively constituting over 60% of the FAs of GLs. In terms of PLs and glycerolipids, S. platensis and C. vulgaris displayed elevated levels of arachidonic acid (AA) and eicosapentaenoic acid (EPA), whereas S. limacinum exhibited a significant presence of docosahexaenoic acid (DHA). Principal component analysis (PCA) revealed MGDG (16:0/18:1), DG (16:0/22:5), Cer (d18:1/20:0), and LPC (16:1) as promising lipid markers for discriminating between these microalgae samples. This study contributes to a comprehensive understanding of lipid profiles in three microalgae species, emphasizing their distinct biochemical characteristics and potentially informing us of their high-value utilization in the food industry.

Harnessing the Propulsive Force of Microalgae with Microtrap to Drive Micromachines.

Microorganisms possess remarkable locomotion abilities, making them potential candidates for micromachine propulsion. Here, the use of Chlamydomonas Reinhardtii (CR) is explored, a motile green alga, as a micromotor by harnessing its propulsive force with microtraps. The objectives include developing the microtrap structure, evaluating trapping efficiency, and investigating the movement dynamics of biohybrid micromachines driven by CR. Experimental analysis demonstrates that trap design significantly influences trapping efficiency, with a specific trap configuration (multi-ring structure with diameters of 7 µm - 10 µm - 13 µm) showing the highest effectiveness. The micromachine empowered with two CRs facing the same direction exhibits complex, random-like motion with yaw, pitch, and roll movements, while the micromachine with four CRs in a circular position each facing the tangential direction of the circle demonstrates controlled rotational motion. These findings highlight the degree of freedom and movement potential of biohybrid micromachines.

The 'Erlenmeter': a low-cost, open-source turbidimeter for no-sampling phenotyping of microorganism growth.

This work presents a low-cost, open-source turbidimeter, the 'Erlenmeter', designed to monitor the growth of microorganisms in batch cultures. It is easy to build, based exclusively on inexpensive off-the-shelf electronic components and 3D-printed parts. The Erlenmeter allows measuring the optical density of cultures on standard Erlenmeyer flasks without the need to open the flasks to collect aliquots, ensuring speed, minimal use of consumables, and elimination of the risk of contamination. These features make it particularly well-suited not just for routine research assays but also for experimental teaching. Here we illustrate the use of the Erlenmeter turbidimeter to record the growth of the microalga Phaeodactylum tricornutum, of the bacterium Escherichia coli, and of the yeast Saccharomyces cerevisiae, model organisms that are widely used in research and teaching. The Erlenmeter allows a detailed characterization of the growth curves of all organisms, confirming its usefulness for studying microbial populations dynamics both for research purposes and in classroom settings.

Enhancing CO2 dissolution and inorganic carbon conversion by metal-organic frameworks improves microalgal growth and carbon fixation efficiency.

Carbon supplementation strategies still have certain practical application constraints. Zn/Fe-based metal-organic frameworks (MOFs) nanoparticles that which are not toxic to Scenedesmus obliquus were successfully introduced into microalgal solutions to overcome low CO2 solubility. The maximum specific surface area of MOFs reached 342.94 m2·g-1 at a Zn/Fe molar ratio of 10/1. Under the optimal MOFs concentrations of 2.5 mg·L-1, the conversion of inorganic carbon increased by 2.6-fold. When S. obliquuswas cultured in a MOFs-modified medium with 1.50 % CO2 at 25 °C, the CO2 mass transfer coefficient and mixing time reached 9.01 × 10-3 min-1 and 55 s, respectively. The maximum chlorophyll-a content, biomass productivity, and CO2 fixation efficiency reached 32.57 mg·L-1, 0.240 g·L-1·d-1 and 21.6 %, respectively. Enriching CO2 for ribulose-1,5-bisphosphate carboxylase/oxygenase carboxylation by MOFs may be the key to improving the photosynthetic efficiency of microalgae. This strategy could serve as a reference for improving the microalgal CO2 fixation efficiency.

Hydrogel-based photobioreactor for Solid-State cultivation of Chlorella vulgaris.

Solid-state cultivation is a promising technology for algal biomass production, achieving high productivities without the need for dewatering. However, such systems have suffered from high evaporation, and capital costs. Here is described a hydrogel photobioreactor (hPBR) with the aim of reducing water demand in solid-state cultivations. Two designs are described with "Design A" offering better humidity control overgrowth conditions. A biomass productivity of 2.41gm-2d-1, and 2.87gm-2d-1 when using physically crosslinked poly(vinyl alcohol) (pPVA) and chemically crosslinked PVA (cPVA) respectively were achieved with Chlorella vulgaris with a water demand around 0.44 kg g-1 of biomass. Over the 23 days of growth, the lipid content increased from 18.9 % to 56.6 % and 13.8 % to 43.2 % for pPVA and cPVA respectively, and the chlorophyll content decreased by more than 81 %. However, cell viability stayed high at over 98 % and surface coverage analysis showed good coverage of the gel surface.

Characterization of Selected Microalgae Species as Potential Sources of Nutrients and Antioxidants.

Microalgae are exceptional organisms from a nutritional perspective, boasting an array of bioactive compounds that have long justified their incorporation into human diets. In this study, we explored the potential of five microalgae species: Nannochloropsis sp., Tetraselmis chuii, Chaetoceros muelleri, Thalassiosira weissflogii, and Tisochrysis lutea. We conducted comprehensive analyses of their nutritional profiles, encompassing protein content, individual amino acid composition, mineral and trace element levels, fatty acid profiles (including saturated fatty acids (SFAs), monounsaturated fatty acids (MUFAs), and polyunsaturated fatty acids (PUFAs)), polyphenol compositions, and vitamin B content. The antioxidant activity of the ethanolic extracts was evaluated using two methods: ABTS and DPPH radical scavenging assay. The total protein content of the microalgae ranged from 34.09 ± 0.39% to 42.45 ± 0.18%, with the highest concentration observed in T. weissflogii. Essential amino acids such as histidine, threonine, lysine, valine, isoleucine, leucine, phenylalanine, and methionine were present in concentrations ranging from 0.53 ± 0.02 to 12.55 ± 2.21 g/16 g N. Glutamic acid emerged as the most abundant amino acid, with concentrations ranging from 6.73 ± 0.82 to 12.55 ± 2.21 g/16 g N. Among the microalgae species, T. chuii exhibited the highest concentrations of calcium (Ca) and manganese (Mn), while C. muelleri showed prominence in magnesium (Mg), sodium (Na), and iron (Fe). T. weissflogii stood out for its potassium (K) content, and T. lutea contained notable amounts of copper (Cu), zinc (Zn), and lead (Pb). Regarding fatty acid profiles, Nannochloropsis sp. and T. chuii were predominantly composed of SFA, while C. muelleri and T. weissflogii were rich in MUFA. PUFAs dominated the fatty acid profile of T. lutea, which also exhibited the most diverse range of polyphenolic substances. We also analyzed the B vitamin content, with T. lutea displaying the highest concentrations of niacin (B3) and riboflavin (B2). Antioxidant activity was confirmed for all microalgae tested using DPPH and ABTS radical IC50 (mg/mL) converted to Trolox equivalent (TEAC). These findings underscore the substantial potential of the examined microalgae species as sources of biologically valuable substances characterized by rapid growth and relatively undemanding cultivation conditions.

Performance of four different microalgae-based technologies in antibiotics removal under multiple concentrations of antibiotics and strigolactone analogue GR24 administration.

The formation of symbionts by using different combinations of endophytic bacteria, microalgae, and fungi to purify antibiotics-containing wastewater is an effective and promising biomaterial technology. As it enhances the mixed antibiotics removal performance of the bio-system, this technology is currently extensively studied. Using exogenous supplementation of various low concentrations of the phytohormone strigolactone analogue GR24, the removal of various antibiotics from simulated wastewater was examined. The performances of Chlorella vulgaris monoculture, activated sludge-C. vulgaris-Clonostachys rosea, Bacillus licheniformis-C. vulgaris-C. rosea, and endophytic bacteria (S395-2)-C. vulgaris-C. rosea co-culture systems were systematically compared. Their removal capacities for tetracycline, oxytetracycline, and chlortetracycline antibiotics from simulated wastewater were assessed. Chlorella vulgaris-endophytic bacteria-C. rosea co-cultures achieved the best performance under 0.25 mg L-1 antibiotics, which could be further enhanced by GR24 supplementation. This result demonstrates that the combination of endophytic bacteria with microalgae and fungi is superior to activated sludge-B. licheniformis-microalgae-fungi systems. Exogenous supplementation of GR24 is an effective strategy to improve the performance of antibiotics removal from wastewater.

Characterization of Microalgae Biomass-Based Composites Obtained through Rotational Molding.

The wide range of applications and the numerous advantages of plastics have led to their excessive use, with subsequent damage to ecosystems. As an environmentally friendly alternative, biocomposites have gained much attention, and microalgae have become a potential source for their production. In this study, the use of washed and unwashed Spirulina in polyethylene-based composites has been evaluated as a way to prevent the thermooxidation of polyethylene, while at the same time, reducing the amount of virgin plastic used. Biocomposites were produced by rotomolding, testing different biomass contents and determining their mechanical and thermal performances as well as their water uptake level. Composites with up to 15% of biomass (by weight), a particularly high ratio for rotomolding, were satisfactorily produced. Using 5% of both biomasses did not significantly modify the behavior when compared with the neat PE samples' properties. For higher loadings, the use of non-washed biomass allowed us to obtain better properties, with added benefits related to using an unwashed biomass (less water consumption, lower costs and fewer environmental impacts). On the other hand, this study showed a promising beneficial effect on the thermooxidative resistance of composites, as the oxidation induction times were notably increased with biomass addition.

High-throughput microalgae sorting based on the deterministic lateral displacement technique.

Microalgae are a group of photosynthetic organisms that can grow autotrophically, performing photosynthesis to synthesize abundant organic compounds and release oxygen. They are rich in nutritional components and chemical precursors, presenting wide-ranging application prospects. However, potential contamination by foreign strains or bacteria can compromise their analytical applications. Therefore, the obtaining of pure algal strains is crucial for the subsequent analysis and application of microalgae. This study designed a deterministic lateral displacement (DLD) chip with dual input and dual outlet of equal width for the separation of Haematococcus pluvialis and Chlorella vulgaris. Optimal separation parameters were determined through a series of experiments, resulting in a purity of 99.80 % for Chlorella vulgaris and 94.58 % for Haematococcus pluvialis, with recovery rates maintained above 90 %, demonstrating high efficiency. This study provides a reliable foundation for future research and applications of microalgae, which holds considerable significance for the subsequent analysis and utilization of microalgae.

Improving protein extraction and peptide production from Chlorella vulgaris using combined mechanical/physical and enzymatic pre-treatments.

Chlorella vulgaris is a microalga rich in proteins with potential applications in food and feed industries. However, the presence of a cellulose-containing cell wall, which is a major barrier to protein extraction, together with fibroproteinaceous complexes, limits the bioaccessibility of nutritional and bioactive proteins and peptides from C. vulgaris biomass. Therefore, this study aimed to evaluate the effect of different mechanical/physical pre-treatments (bead milling, extrusion, freeze-drying, heating, microwave and sonication) combined or not with enzymatic treatments (commercial trypsin and pancreatin) on protein extraction and peptide formation from a C. vulgaris suspension. The amount of total protein and peptides released to the supernatant was quantified by Bradford and o-phthaldialdehyde assays, respectively. Sodium dodecyl sulphate-polyacrylamide gel electrophoresis was used to analyse the extracted protein fractions. The results showed that extrusion caused a 3-fold increase in total peptides (p < 0.001) compared to no-pretreatment, and trypsin increased peptides formed in bead-milled (p = 0.020) and freeze-dried (p = 0.021) microalga relative to those pre-treatments alone. Some pre-treatments, such as bead milling and microwave, were effective in releasing specific protein fractions, particularly those from 32 to 40 kDa (up to 1.2-fold), compared to control. Pancreatin combined with bead milling decreased 32 to 40 kDa- and 26 kDa-protein fractions (p < 0.010) compared with the sole use of mechanical treatment, whereas the same enzyme mixture associated with microwave produced a similar result for 26 kDa-protein fraction (p = 0.023). Pancreatin also effectively reduced the total protein fraction released after pre-treatment with sonication (p = 0.013). These findings suggest that combining different pre-treatments and enzymatic treatments could improve protein extraction from C. vulgaris biomass, providing a useful approach for the development of sustainable protein sources. The present results highlight the need for further studies to assess the efficacy of extrusion in improving the bioaccessibility of C. vulgaris proteins in monogastric animals' diets.

Fatty acid analysis in microalgal mono- and polycultures using diffuse reflectance infrared Fourier transform spectroscopy coupled with partial least squares analysis.

Fatty acids are of particular interest for industrial applications of microalgal feedstock, as these have a wide array of different uses such as pharmaceuticals and biofuels. Fourier transform infrared (FTIR) spectroscopic techniques used in combination with multivariate prediction modeling are showing great potential as analytical methods for characterizing microalgal biomass. The present study investigated the use of diffuse reflectance Fourier transform infrared spectroscopy (DRIFTS) coupled with partial least squares regression (PLSR) to estimate fatty acid contents in microalgae. A prediction model for microalgal samples was developed using algae cultivated in both Bold's basal medium (BBM) and sterilized municipal wastewater under axenic conditions, as well as algal polycultures cultivated in open raceway ponds using untreated municipal wastewater influent. This universal prediction model was able to accurately predict microalgal samples of either type with high accuracy (RMSEP = 1.38, relative error = 0.14) and reliability (R2 > 0.92). DRIFTS in combination with PLSR is a rapid method for determining fatty acid contents in a wide variety of different microalgal samples with high accuracy. The use of spectral characterization techniques offers a reliable and environmentally friendly alternative to traditional labor intensive techniques based on the use of toxic chemicals.

Recovery and encapsulation of Dunaliella salina ß-carotene through a novel sustainable approach: Sequential application of an ionic liquid as naturally-derived solvent and emulsifier.

Dunaliella salina is a promising source of ß-carotene, widely employed in the food industry. This study aimed to evaluate the sequential application of the Ionic Liquid (IL) cholinium oleate as an extraction solvent for D. salina ß-carotene recovery and, sequentially, as emulsifier for emulsion-based products obtained therefrom. The IL was evaluated regarding its ability to permeabilize the cells and recover ß-carotene at different temperatures (25-65 °C) and IL concentrations (0-46%). The use of the IL as solvent greatly improved ß-carotene recovery (>84%). The IL already present in the obtained extracts loaded with recovered ß-carotene was sequentially used as emulsifier in the production of nanoemulsions (NE). NE presented a ß-carotene entrapment efficiency of 100% and were kinetically stable for 30 days and presented droplet size, size distribution, and ζ-potential of 220 nm, 0.21, and -67 mV, respectively. These results indicate that using IL sequential as solvent and emulsifier has potential applications in the food industry.

Negative effects of cigarette butt leachate on freshwater phytoplankton communities.

We experimentally tested the effects of different concentrations of cigarette butt leachate on freshwater phytoplankton chlorophyll-a, species richness, cell density, and community composition. For this, we sampled the phytoplankton from a eutrophic lake and acclimated it for 24 h in microcosms. We then conducted the experiment in microcosms maintained for 96 h. The experiment consisted of four treatments: control and leachate from 1 butt L-1 (T1), 5 butts L-1 (T5), and 10 butts L-1 (T10), which were prepared by diluting a stock solution of leachate from 50 butts L-1. We found that algal chlorophyll-a content was not affected by different leachate concentrations. In contrast, phytoplankton cell density decreased in a dose-dependent manner as concentrations of the leachate increased. Similarly, the number of species was highest in the control group relative to all other treatments, with T1 and T5 showing higher species richness than T10. Additionally, the exposition to different concentrations of the leachate impacted community composition across all treatments in comparison to the control group. Our results suggest that cigarette butt leachate alters the number of cells and species, as well as the distribution of abundance, without necessarily reducing chlorophyll-a concentrations. Our findings indicate that to gain a comprehensive understanding of the effects of cigarette butt leachate on freshwater ecosystems, it is essential to evaluate more realistic scenarios that incorporate aquatic communities, rather than isolated species.

Recent progress on the toxic effects of microplastics on Chlorella sp. in aquatic environments.

Microplastics (MPs) are emerging contaminants that have harmful effects on ecosystems. Microalgae are important primary producers in aquatic environments, providing nutrients for various organisms. These microorganisms may be affected by MPs. Therefore, it is important to investigate the toxicity aspects of different MPs on Chlorella species. It can be seen that the BG-11 culture medium was the most commonly used medium in 40 % of the studies for the growth of Chlorella sp. Chlorella sp. grows optimally at a temperature of 25 °C and a pH of 7. Most studies show that Chlorella sp. can grow in the range of 3000-6000 lux. Moreover, various techniques have been used to analyze the morphological properties of MPs in different studies. These techniques included scanning electron microscopy (SEM), Fourier transform infrared (FTIR), and transmission electron microscopy (TEM), which were used in 65 %, 35 %, and 27 % of the studies, respectively. 53 % of the research has focused on the toxic effects of PS on Chlorella sp. Findings show that 41 % of the studies investigated MPs concentrations in the range of 10-100 mg/L, followed by 32 % of the studies in the range of 100-1000 mg/L. The studies found that MPs were used in a spherical shape in 45 % of the cases. The enzymes most affected by MPs were superoxide dismutase (SOD) and Malondialdehyde (MDA), accounting for 48 % of the studies each. Additionally, exposure to MPs increased the activity of enzymes such as SOD and MDA. In general, it can be concluded that MPs had a relatively high negative effect on the growth of Chlorella sp.

Chassis engineering for high light tolerance in microalgae and cyanobacteria.

Oxygenic photosynthesis in microalgae and cyanobacteria is considered an important chassis to accelerate energy transition and mitigate global warming. Currently, cultivation systems for photosynthetic microbes for large-scale applications encountered excessive light exposure stress. High light stress can: affect photosynthetic efficiency, reduce productivity, limit cell growth, and even cause cell death. Deciphering photoprotection mechanisms and constructing high-light tolerant chassis have been recent research focuses. In this review, we first briefly introduce the self-protection mechanisms of common microalgae and cyanobacteria in response to high light stress. These mechanisms mainly include: avoiding excess light absorption, dissipating excess excitation energy, quenching excessive high-energy electrons, ROS detoxification, and PSII repair. We focus on the species-specific differences in these mechanisms as well as recent advancements. Then, we review engineering strategies for creating high-light tolerant chassis, such as: reducing the size of the light-harvesting antenna, optimizing non-photochemical quenching, optimizing photosynthetic electron transport, and enhancing PSII repair. Finally, we propose a comprehensive exploration of mechanisms: underlying identified high light tolerant chassis, identification of new genes pertinent to high light tolerance using innovative methodologies, harnessing CRISPR systems and artificial intelligence for chassis engineering modification, and introducing plant photoprotection mechanisms as future research directions.

Comparative plastome and mitogenome analyses indicate that the marine prasinophyte green algae Pycnococcus provasolii and Pseudoscourfieldia marina (Pseudoscourfieldiophyceae class nov., Chlorophyta) represent morphotypes of the same species.

The marine prasinophyte green algae Pycnococcus provasolii and Pseudoscourfieldia marina represent the only extant genera and known species of the Pycnococcaceae. However, their taxonomic status needs to be reassessed, owing to the very close relationship inferred from previous sequence comparisons of individual genes. Although Py. provasolii and Ps. marina are morphologically different, their plastid rbcL and nuclear small subunit rRNA genes were observed to be nearly or entirely identical in sequence, thus leading to the hypothesis that they represent distinct growth forms or alternate life-cycle stages of the same organism. To evaluate this hypothesis, we used organelle genomes as molecular markers. The plastome and mitogenome of Ps. marina UIO 007 were sequenced and compared with those available for two isolates of Py. provasolii (CCMP 1203 and CCAP 190/2). The Ps. marina organelle genomes proved to be almost identical in size and had the same gene content and gene order as their Py. provasolii counterparts. Single nucleotide substitutions and insertions/deletions were localized using genome-scale sequence alignments. Over 99.70% sequence identities were observed in all pairwise comparisons of plastomes and mitogenomes. Alignments of both organelle genomes revealed that Ps. marina UIO 007 is closer to Py. provasolii CCAP 190/2 than are the two Py. provasolii strains to one another. Therefore, our results are not consistent with the placement of Ps. marina and Py. provasolii strains into distinct genera. We propose a taxonomic revision of the Pycnococcaceae and the erection of a new class of Chlorophyta, the Pseudoscourfieldiophyceae.

Cultivation of Chlorella vulgaris in wastewater: biodiesel potential and wastewater remediation.

The present investigation has evaluated the use of effluents from a secondary municipal wastewater treatment plant for biomass production and potential of the biomass for biodiesel production. Cultivations of Chlorella vulgaris using wastewater, wastewater with supplementation, and WC medium were carried out. Effect of wastewater collected in different months on biomass productivity (BP) and lipid composition was studied. Methods based on NMR and GC-MS techniques were applied for determining the composition of the lipids and their fatty acid profile including poly unsaturated fatty acids (PUFAs). Lipids extracted are comprised of both neutral (tri acyl glycerides, TAG; free fatty acids, FFA) and polar (glyco glycero/phospho) lipids. The TAG content of the extracted lipids was determined in the range of 22.5-41.3% w/w. The NMR and GC-MS compositional results of microalgal lipids of biomasses cultivated in wastewater without nutrient supplementation, collected in different months, showed potential for biodiesel production. The fatty acid profiles of neutral and polar lipids, which are mainly comprised of saturated and unsaturated long alkyl chain (C16-C22) fatty acids, are potential sources for the biodiesel and food industry. The concentration of nitrates (45-78 mg L-1) in wastewater without supplementation, collected in different months, was found to be optimum to enable cultivation of biomasses with reasonably good BP of 21.5-28.1 mg L-1 day-1. Similar results have been obtained in the present work as well as reported in the literature in the case of WC medium (nitrate, 69 mg L-1) with BP of 25.5-28.2 mg L-1 day-1, thus highlighted the significance of the presented work.

Biological effects of culture medium on Tetraselmis chuii and Dunaliella tertiolecta: Implications for emerging pollutants degradation.

In this study, laboratory-scale cultivation of T. chuii and D. tertiolecta was conducted using Conway, F/2, and TMRL media to evaluate their biochemical composition and economic costs. The highest cell density (30.36 × 106 cells/mL) and dry weight (0.65 g/L) for T. chuii were achieved with Conway medium. This medium also produced biomass with maximum lipid content (25.65%), proteins (27.84%), and total carbohydrates (8.45%) compared with F/2 and TMRL media. D. tertiolecta reached a maximum cell density of 17.50 × 106 cells/mL in F/2 medium, which was notably lower than that of T. chuii. Furthermore, the media cost varied from US$0.23 to US$0.74 for each 1 L of media, primarily due to the addition of Na3PO4, KNO3, and cyanocobalamin. Thus, biomass production rates varied between US$38.81 and US$128.80 per kg on a dry weight basis. These findings comprehensively compare laboratory conditions and the costs associated with biomass production in different media. Additionally, this study explored the potential of T. chuii and D. tertiolecta strains, as well as their consortia with bacteria, for the degradation of various emerging pollutants (EPs), including caffeine, salicylic acid, DEET, imidacloprid, MBT, cimetidine, venlafaxine, methylparaben, thiabendazole, and paracetamol. Both microalgal strains demonstrated effective degradation of EPs, with enhanced degradation observed in microalgae-bacterial consortia. These results suggest that the symbiotic relationship between microalgae and bacteria can be harnessed for the bioremediation of EPs, thereby offering valuable insights into the environmental applications of microalgal cultivation.