Three-Dimensional Morphological Study on the Effectiveness of Expanded Polytetrafluoroethylene Prosthesis in the Paranasal Augmentation.

BACKGROUND: The paranasal depression is a common facial feature of Oriental populations. One of the most wildly used method to improve it was paranasal augmentation using expanded polytetrafluoroethylene (ePTFE). The effectiveness of it should be tested by three-dimensional morphological measurements. METHODS: Patients who underwent paranasal augmentation using ePTFE between January 2017 and December 2022 were recruited in the study. The preoperative and postoperative clinical variables and three-dimensional measurement of patients were also collected. The satisfaction outcome were assessed. RESULTS: By establishing a coordinate system based on the Frankfurt plane, 16 landmarks including nasal alar crest, subnasal point, upper lip, pogonion, glabella, sub-cheek, orbitale, tragion in left and right side of faces were marked. Five segments, 4 ratios, and 3 angles were measured based on it. The significant increase of segments, ratios, and angles indicated that paranasal augmentation could increase the protrusion of paranasal area, both in absolute value and relative proportion. The significant decrease of other data indicated that the protrusion difference between paranasal base and upper lip, forehead, and chin, respectively, were shortened after surgery. The average size of implant was 6.54 ± 1.02 mm, and the average increase of paranasal height was 4.38 ± 1.04 mm postoperatively. This indicates that two-thirds of its height will ultimately be reflected effectively in the sagittal elevation of the paranasal base. CONCLUSIONS: Paranasal augmentation using ePTFE could effectively increase paranasal height and improve subunits relationships, and the ePTFE prosthesis should be designed and carve considering the 1/3 loss of height after implantation. LEVEL OF EVIDENCE III: This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

Assessment of conventional magnetic resonance morphological measurements in diagnosis and differential diagnosis of progressive supranuclear paralysis / 中华老年医学杂志

Objective:To study the features as well as the diagnosis and differential diagnosis values by conventional MRI morphometrics in different clinical subtypes of progressive supranuclear palsy(PSP).Methods:Forty five patients with PSP were included, comprising three PSP subtypes: 15 cases of Richardson's syndrome(PSP-RS), 15 cases of Parkinson's syndrome(PSP-P)and 15 cases of progressive frozen gait(PSP-PFG). In addition, three control groups were established: 15 cases of multiple system atrophy-Parkinson's syndrome(MSA-P), 30 cases of primary Parkinson's disease(PD)and 40 healthy controls(HC). Midbrain area-to-Pons area ratio(M/P), Magnetic Resonance Parkinsonism Index(MRPI, MRPI2.0), width ratio of middle cerebellar peduncle to superior cerebellar peduncle(MCP/SCP), Midbrain-to-Pons ratio(MTPR), Angle of cerebral peduncle(A cp), third ventricle width/frontal horns width ratio(V 3rd/FH), and Humming bird sign rating scale(HBS-RS)scores were calculated.Diagnostic sensitivity and specificity were performed by ROC curve to assess the accuracy of these imaging indicators in the diagnosis and differential diagnosis of PSP and its subtypes. Results:The MRPI, MRPI2.0, MCP/SCP and HBS-RS scores were significantly higher in PSP group than in other control groups( H=69.351, 66.776, 33.926 and 84.694, all P<0.05), while M/P and MTPR were significantly lower in PSP group than in other control groups(H=60.101 and 77.276, all P<0.05). PSP group also had higher V 3rd/FH compared with PD or HC group( F=17.168, P<0.05), but not with MSA-P group( Z=-1.602, P>0.05). The above differences also existed between each PSP subgroup and control groups.Among PSP subgroups, PSP-PFG subgroup had a larger A cp than did PSP-RS( Z=-2.510, P<0.05), and had higher HBS-RS score than did PSP-P group( Z=-2.380, P<0.05). No significant differences in other MRI morphometric indexes were identified among PSP subtypes.The M/P, MRPI, MTPR, MRPI2.0, HBS-RS score showed good accuracy in diagnosing PSP and its each subgroup, with HBS-RS score being the most accurate indicator, when the cutoff value was 2, the AUC values were all higher than 0.99, and the sensitivity and specificity were all above 90%.PSP and its subtypes were best distinguished from MSA-P by MRPI, when the cutoff value was 9.94, the AUC values were all higher than 0.90, with the sensitivity of 100% and specificity of 86.67%.PSP and its subtypes were best distinguished from PD by MTPR, AUC values were all above 0.95, with slightly different cutoff values.Almost all the morphological measurement parameters failed to show significant sensitivity and specificity in discriminating subtypes of PSP.The sensitivity and specificity of almost all MRI morphometry indicators in differentiating different subtypes of PSP are not high. Conclusions:MRI morphometrics have a high value both in the diagnosis of PSP and its subtypes, and also in specific application fields.MRI morphometrics have a limited value in discriminating PSP subtypes.

An Open Debate on the Morphological Measurement Methodologies of the Infrapatellar Fat Pad to Determine Its Association with the Osteoarthritis Process.

INTRODUCTION: Knee osteoarthritis (OA) is a disease affecting all the neighboring articular tissues including the infrapatellar fat pad (IPFP). Although not yet as widely studied as other tissues in the knee, the IPFP has been recognized to have important metabolic activities and is a key player in OA. METHODS: In this commentary, we will briefly describe the different methodologies employed for the MRI morphological measurement of this tissue and depict the findings in regard to OA. RESULTS: The morphology of this tissue, monitored mainly with the use of magnetic resonance imaging (MRI), demonstrates changes during OA. However, studies of the IPFP morphological alterations and their association with the OA process have shown conflicting results, including a detrimental or beneficial role or no role at all. Although many reasons could explain such mixed findings, one might be the different methodologies used for the MRI measurement of area, volume, or signal intensity. In addition, several techniques are also employed for measuring the volume and signal intensity. An additional level of complexity is related to the presence within the IPFP of two different types of signal intensities, hyper-intensity, and hypo-intensity. CONCLUSION: A consensus of a procedure to measure the morphology of the IPFP is urgently needed to fully appreciate the role of this tissue in the pathology of OA, as well as its uses for clinical decision-making.

Morphological analysis and measurement of spinoglenoid notch of scapula based on 3D reconstruction of CT / 解剖学报

Objective To observe the anatomical structure of spinoglenoid notch of scapula by 3D reconstruction of normal adult scapula by computed tomography (CT), and to provide reference for clinical assessment of suprascapular nerve compression risk, suprascapular nerve compression treatment and shoulder joint operation. Methods Totally 335 cases of normal adult scapula were reconstructed by CT, and classified according to the anatomical shape of spinoglenoid notch; the spinoglenoid notch width (MN), spinoglenoid notch depth (OP), spinoglenoid notch thickness (XY), spinoglenoid notch angle (Z.M0N), distance from 0 point to the inner upper corner of scapula (0A), distance from 0 point to medial lateral edge of scapula (OB), distance from 0 point to inferior angle of scapula (OC) and distance from 0 point to the lowest point of suprascapular notch (OD) were observed and analyzed. Results 1. The morphology of spinoglenoid notch was divided into four types; U type (41. 79%), fin type (42. 99%), L type (8. 36%) and ladder type (6. 86%). U type and fin type were the most common types. Comparison of the four shapes; fin type was the narrowest (11.58 ± 1.74) mm and the deepest (14.58 ± 1.81) mm, the /_ M0N was the smallest (45.62 ± 6.43) ° and the ladder type was the widest (14. 20 ± 2. 67) mm and the shallowest (10. 80 ± 0. 79) mm, the Z.MON was maximum (57. 69 ± 2. 22) ° and the least prone to suprascapular nerve compression. 2. There was no significant difference in MN, OP, XY, zlMON, OA, OB, 0C and OD between left and right sides. 3. The data of MN, OP, XY, OA, OB, OC and OD of men were larger than those of women significantly, but Z. MON was smaller than that of women, indicating that men' s spinoglenoid notch was thicker, wider and deeper, and scapula was wider and longer than that of women. Conclusion The measurement of the morphological and anatomical characteristics of spinoglenoid notch with CT three-dimensional reconstruction is helpful to evaluate the risk of suprascapular nerve compression, the treatment of suprascapular nerve compression, and provide guidance for clinical shoulder surgery.

Changes in Gray Matter Volume in Chronic Nonfluent Aphasia after Cortical Cerebral Infarction / 中国康复理论与实践

Objective:To investigate the changes of gray matter volume in patients with chronic nonfluent aphasia after cortical cerebral infarction and the relationship between gray matter volume and language function. Methods:From June, 2016 to June, 2019, 19 patients with chronic nonfluent aphasia after cortical cerebral infarction from the First Affiliated Hospital of Ji'nan University and 28 healthy subjects (controls) were scanned with structural magnetic resonance imaging. The data were analyzed using voxel-based morphological measurement to measure the gray matter volumes of the brain regions, and the differences between patients and controls were compared. The correlation between volumes of brain regions with difference and scores of items of Aphasia Battery of Chinese (ABC) was analyzed. Results:The gray matter volumes increased in the brain regions of right inferior frontal gyrus triangle, right inferior frontal gyrus island cover, right angular gyrus, the right medial frontal gyrus, left insula, left medial frontal gyrus in the patients; while decreased in right globus pallidus. The volumes of left insular lobe correlated with the scores of repeating (r = 0.665, P = 0.001) and naming (r = 0.638, P = 0.003); and the volumes of right inferior frontal gyrus triangle correlated with the scores of hearing comprehension (r = 0.493, P = 0.031), repeating (r = 0.576, P = 0.009) and naming (r = 0.674, P = 0.001) in the patients. Conclusion:The cortex volumes of left insula and right inferior frontal gyrus triangle increase in patients with chronic nonfluent aphasia after cerebral infarction, which may play a role in the language dysfunction.

Three￣dimensional digital measurement of occipital condyle and foramen magnum in Inner Mongolia / 解剖学报

Objective To measure the anatomical structure of the occipital condyle (OC) and the occipital foramen (FM) by three-dimensional reconstruction, and to analyze the morphological characteristics and relative positional relationship of the occipital condyle and occipital foramen, in order to provide anatomical parameters for the imaging diagnosis of the craniocervical junction and the choice of surgical approach. Methods Sixty normal subjects were selected with CT scans of the skull and upper cervical spine, including 30 males and 30 females, aged 20-65 (48. 18±16. 17) years old. The data were imported into the Syngo.via VB10B software, and the skull was reconstructed in three dimensions. To observe the shape of the occipital condyle and occipital foramen, and to measure the occipital condyle length, width, height, condyle inclination angle(CIA), longitudinal diameter, transverse diameter, area of the occipital foramen, the maximum distance between the cranial eyebrow and the posterior cranial point (SML), the crimson eyebrow on the SML line, the distance from the interpoint to the posterior margin of the occipital condyle (GOCP), the vertical distance between the anterior edge of the occipital foramen to the posterior margin of the occipital condyle (AOCP), and the distance from the medial margin of the left and right occipital condyles to the Y axis (OC-M), left and right occipital condyle posterior margin to X axis distance (OC-P); occipital condyle classification index (OCI), occipital condyle relative index of head (SOCI), midpoint on the SML straight line to the occipital condyle Marginal connection distance (COCP,COCP =GOCP-SML/ 2), and determine the type of relative positional relationship between left and right occipital condyles. Results The differences in anatomical length, width and height of the occipital condyle were statistically significant (P<0. 05), and men were larger than women; the occipital foramen area, longitudinal diameter of the occipital foramen, SML, GOCP, AOCP had statistical differences (P<0. 05). The lateral differences of occipital condyle inclination were statistically significant (P<0. 05), and the left side was greater than the right side. The differences in OC-M and OC-P sides were statistically significant (P<0. 05). The former was larger on the right than on the left; the latter was larger on the left than on the right. The longitudinal diameter of the occipital foramen was positively correlated with the area of the occipital foramen and AOCP; OCI classification result were as follows: typeⅠ(OCI<0. 45) had 8 cases (13. 33%), type Ⅱ (0. 45≤OCI<0. 50) had 47 cases (78. 33%), type Ⅲ (OCI≥0. 50) had 5 cases (8. 33%). SOCI classification result were as follows: type Ⅰ (SOCI< 0. 60) had 2 cases (3. 33%), type Ⅱ (0. 60≤SOCI<0. 75) had 54 cases (90. 00%), type Ⅲ (SOCI≥0. 75) had 4 cases (6. 67%). Conclusion The anatomical parameters of the occipital condyle in Inner Mongolia can be implanted with occipital condylar screws. The position of the occipital condyle relative to the foramen magnum and the skull is highly variable.

Discovery of lung surface intersegmental landmarks by three-dimensional reconstruction and morphological measurement.

BACKGROUND: The lack of anatomic landmarks between segments on the lung surface makes the identification of intersegmental planes one of the greatest challenges in anatomic segmentectomy. Therefore, with the aim to determine the landmarks of intersegmental planes on the lung surface, we used three-dimensional (3D) reconstruction and morphological measurement techniques to reconstruct stereoscopic models of all pulmonary segments, and measured the length of each segment on the lung surface along the lobe's anatomic landmark lines. METHODS: We downloaded the primary computed tomography (CT) scan data of 619 patients and imported them into a 3D reconstruction system, which could automatically reconstruct the 3D model of the trachea-bronchi system. We manually reconstructed the intersegmental veins to ensure the accuracy of segmental boundary. The 3D models of pulmonary segments could be reconstructed based on the bronchial tree and the pathways of the intersegmental veins. We then measured the length of each segment on the lung surface along the lobe's anatomic landmark lines and calculated the proportions between these lengths. RESULTS: Complete 3D segmental models were successfully reconstructed in 500 patients (241 male and 259 female), and the lengths of every segment on the lung surface along the lobe's anatomic landmark lines were measured. Our data revealed that the length of each segment on lung surface varied among individuals. However, the proportions between these lengths stayed constant, even when stratified by gender, age, height, and weight. CONCLUSIONS: We discovered that the proportion between the lengths of adjacent segments on the lung surface stayed constant. The constant proportion reflected and uncovered the lung surface intersegmental landmarks, which could help direct surgeons to identify intersegmental planes during anatomic segmentectomy in an easy and safe way without additional cost.

The risk of violating the posterior malleolar fracture when nailing the ipsilateral concomitant spiral distal tibial fracture.

BACKGROUND: For a distal tibial spiral fracture combined with a non-displaced posterior malleolar fragment (PMF), we proposed a hypothesis that the treating surgeon could assess the size of the PMF to determine the need for stabilizing that structure first before rodding the tibia. MATERIALS AND METHODS: Fifty 3-D models (22 females) of combined distal tibial and posterior malleolar fractures from one trauma center were reconstructed. In each case, a virtual tibial intramedullary nail (vIM nail) with three distal anteroposterior (AP) locking screws (S13, S15 and S37, the number indicating the distance from the screw to the nail tip) were inserted into the center of the tibial canal and ended on top of the distal tibial physeal scar. Contact between the screws and the PMF was defined as causing PMF displacement. The relationship between PMF secondary displacement and traumatic anatomic factors (the fragment area and height of the PMF) was explored. Then, the parameters were justified by analyzing intraoperative radiographs of 35 cases treated by nail with single locking screw (S15) design. RESULTS: In the analog experiment, multiple logistic regression analysis revealed that the height of the PMF could confidently predict the risk of fragment displacement (S13: odds ratio [OR] 1.18, 95% confidence interval [CI] 1.06-1.32; S15: OR 1.15, 95% CI 1.05-1.27). Regarding the height of the PMF, the receiver operating characteristic established a cut-off value of 31.2 mm for preliminary fixation of the fragment with 88.89% sensitivity and 88.89% specificity. In the operation group the nail stopped on the top of distal tibial physeal scar, no PMF secondary displacement occurred when the PMF height was less than 31.2 mm. However, the incidence of secondary displacement was 93.33% when the height of the PMF exceeded 31.2 mm. CONCLUSION: When the distal tibial physeal scare was set as the limit of nail insertion depth, the height of the PMF could be used as a reliable reference predicting the risk of PMF secondary displacement caused by distal anteroposterior locking screw.

Glenoid morphology and the safe zone for protecting the suprascapular nerve during baseplate fixation in reverse shoulder arthroplasty.

PURPOSE: The purpose of this study was to investigate glenoid morphology and define the safe zone for protecting the suprascapular nerve baseplate screw during baseplate fixation in reverse shoulder arthroplasty (RSA) in a Chinese population. METHODS: Shoulder computed tomography (CT) scans from 56 subjects were retrospectively reviewed. Three-dimensional (3D) reconstruction was performed using Mimics software, and corresponding bony references were used to evaluate glenoid morphology. To standardize evaluation, the coronal scapular plane was defined. Safe fixation distances and screw placements were investigated by constructing a simulated cutting plane of the baseplate during RSA. RESULTS: Mean glenoid height was 35.83 ± 2.95 mm, and width was 27.32 ± 2.78 mm, with significant sexual dimorphism (p < 0.01). According to the cutting plane morphology, the average baseplate radius was 13.84 ± 1.34 mm. The distances from the suprascapular notch and from two bony reference points at the base of the scapular spine to the cutting plane were 30.27 ± 2.77 mm, 18.39 ± 1.67 mm and 16.52 ± 1.52 mm, respectively, with a gender-related difference. Based on the clock face indication system, the danger zone caused by the suprascapular nerve projection was oriented between the two o'clock and eight o'clock positions in reference to the right shoulder. CONCLUSIONS: Glenoid size and the safe zone for screw fixation during RSA were characterized in a Chinese population. Careful consideration of baseplate fixation and avoidance of suprascapular nerve injury are important for improved clinical outcome.

Predicting anatomical landmarks and bone morphology of the femur using local region matching.

PURPOSE: Anatomical landmarks and bony features are frequently used in biomechanical and surgical applications. The purpose of this study was to develop a local region matching-based anatomical landmark prediction method. METHODS: A reference femur model with anatomical landmarks and a surface division map was prepared. Initial registration between the reference femur model and a target femur model was performed in three-dimensional Cartesian space, and closest point pairs were determined by the initial surface correspondence. The models were mapped to unit spheres through spherical parameterization. Spherical registration using the closest point pairs in the spherical parametric space enabled the application of a division map from the reference model to the target model. The reference and target models were divided into local regions defined in the division map, and the corresponding regions were again registered in Cartesian space. Anatomical landmarks in the local regions were identified in the target model. RESULTS: The accuracy of the proposed method was tested for anatomical landmarks marked by a clinician on 35 femoral models. The effectiveness of local region matching was demonstrated by automatic measurements of the femoral neck-shaft angle. The average prediction error for all eight anatomical landmarks of the femur was 2.74 (±1.78) mm. The average of the predicted neck-shaft angle for our Korean subjects was 126.41° (±4.92°), which was comparable to previous studies in Japanese and Chinese populations. CONCLUSION: Anatomical landmarks and features could be accurately predicted using the proposed local region matching method. This method offers robustness and accuracy in determining anatomical bony landmarks and bone morphology for clinical and biomechanical applications.

Morphological measurements of the posterior surface of the normal proximal tibia in a healthy Chinese population.

BACKGROUND: To measure and calculate the morphological parameters and determine the anatomical characteristics of the posterior surface of the proximal tibia in a healthy Chinese population. METHODS: A total of 150 volunteers with normal knees were enrolled. The parameters in the multi-slice spiral computed tomography (MSCT) three-dimensional (3-D) reconstruction images were measured and calculated by two independent qualified observers. The differences and correlation were investigated. The intraclass correlation coefficient (ICC) was used to assess inter-observer reliability. RESULTS: The posterior margin of the tibial plateau is presented as two superior arc-shapes. The central angles of these arcs were 118°±14° (medial) and 106°±20° (lateral). The radii of these arcs both showed a skewed distribution. The median radii of the arcs were 22 mm in the medial and 20mm in the lateral. There were two significant angles present in the sagittal plane of the posterior cortex of the proximal tibia. The first angles were 39°±7° (medial) and 47°±7° (lateral). The second angles were 39°±4° (medial) and 41°±5° (lateral). Significant differences were observed in the central angles and the first angles but not in the second angles between the medial and lateral. There were no significant differences between different gender groups, and between left and right limbs. All of these parameters exhibited excellent to moderate ICC. CONCLUSION: Due to the varying anatomic morphology between the postero-medial and postero-lateral surface of the proximal tibia, the internal fixation implants of these two parts should be designed differently.