Regulatory compliance of PCDD/F emissions by a municipal solid waste incinerator. A case study in Sant Adrià de Besòs, Catalonia, Spain.

Despite incineration is an important emission source of toxic pollutants, such as heavy metals and polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), it is still one of the most widely used methods for the management of municipal solid waste. The current paper summarizes the results of a 20-year follow-up study of the emissions of PCDD/Fs by a municipal solid waste incinerator (MSWI) in Sant Adrià de Besòs (Catalonia, Spain). Samples of ambient air, soils and herbage were periodically collected near the facility and the content of PCDD/Fs was analyzed. In the last (2017) survey, mean levels in soil were 3.60 ng WHO-TEQ/kg (range: 0.40-10.6), being considerably higher than the mean concentrations of PCDD/Fs in soil samples collected near other MSWIs in Catalonia. Moreover, air PCDD/F concentrations were even higher than those found in a previous (2014) survey, as they increased from 0.026 to 0.044 pg WHO-TEQ/m3. Ultimately, the PCDD/F exposure would be associated to a cancer risk (2.5 × 10-6) for the population living in the surrounding area. Globally, this information indicates that the MSWI of Sant Adrià de Besòs could have had a negative impact on the environment and potentially on public health, being an example of a possible inappropriate management for years. The application of Best Available Techniques to minimize the emission of PCDD/Fs and other chemicals is critical.

Compressibility characteristics of municipal solid waste considering multiple factors.

Borehole samples were collected from a municipal solid waste (MSW) landfill in Xi'an, China, and subjected to a series of basic geotechnical and compression tests. This study aims to investigate the influence of composition, dry unit weight, moisture content, organic content, and landfill age on the compressibility of MSW. The results show that with increasing landfill age, the compressible components and organic content exhibit a decreasing trend while the dry unit weight increases. The moisture content does not vary significantly. There is also a linear trend between the logarithm of the primary compression strain and vertical stress. In addition, with an increase in compressible components content, moisture content, and organic content, the modified primary compression index (Cc') shows an increasing trend, whereas with an increase in dry unit weight and landfill age, Cc' shows a decreasing trend. Furthermore, regarding the 34 sets of data, authors only selected five data points for a detailed comparative analysis, this decision was made on the basis that these data points are representative. A modified primary compression index prediction model that considers the dry unit weight, moisture content, and landfill age of the MSW as influencing factors results in a fitting coefficient of 0.797. The Cc' values in this study are within the range of 0.12 to 0.36. These findings provide a reference for the vertical expansion design of existing landfills.

Circular economy life cycle cost for kerbside waste material looping process.

Rapid expansion in urban areas has engendered a superfluity of municipal solid waste (MSW) stemming from contemporary civilization, encompassing commercial sectors and human undertakings. Kerbside waste, a type of MSW, has the potential for recycling and reuse at the end of its first life cycle, but is often limited to a linear cycle. This study aimed to assess the life cycle costs of different separation and recycling methods for handling kerbside waste. A new life cycle cost model, drawing from the circular economy's value retention process (VRP) model, has been created and applied to assess the continuous recycling of kerbside glass. The study investigates two key separation techniques, kerbside recycling mixed bin recycling (KRMB) kerbside glass recycling separate bin (KGRSB) and analyses their impact on the life cycle cost of the recycling process. Additionally, the research explores two approaches of recycling and downcycling: closed-loop recycling, which pertains to the recycling of glass containers, and open-looped recycling, which involves the use of recycled glass in asphalt. The results showed when use annually collected waste as the functional unit, the KRMB model incurred lower costs compared to the KGRSB model due to its lower production output. However, when evaluated over a 1-ton production of glass container and asphalt, the KGRSB method demonstrated superior cost performance with a 40-50% reduction compared to the KRMB method. The open-loop recycling method (asphalt) incurred a higher cost compared to the closed-loop recycling method due to its larger production volume over a 21-year period.

Climate impacts of landfill gas emissions: Analysis for 20-year and 100-year time horizons.

Climate impacts of landfill gas emissions were investigated for 20- and 100-year time horizons to identify the effects of atmospheric lifetimes of short- and long-lived drivers. Direct and indirect climate impacts were determined for methane and 79 trace species. The impacts were quantified using global warming potential, GWP (direct and indirect); atmospheric degradation (direct); tropospheric ozone forming potential (indirect); secondary aerosol forming potential (indirect) and stratospheric ozone depleting potential (indirect). Effects of cover characteristics, landfill operational conditions, and season on emissions were assessed. Analysis was conducted at five operating municipal solid waste landfills in California, which collectively contained 13% of the waste in place in the state. Climate impacts were determined to be primarily due to direct emissions (99.5 to 115%) with indirect emissions contributing -15 to 0.5%. Methane emissions were 35 to 99% of the total emissions and the remainder mainly greenhouse gases (hydro)chlorofluorocarbons (up to 42% of total emissions) and nitrous oxide. Cover types affected emissions, where the highest emissions were generally from intermediate covers with the largest relative landfill surface areas. Landfill-specific direct emissions varied between 683 and 103,411 and between 381 and 37,925 Mg CO2-eq./yr for 20- and 100-yr time horizons, respectively. Total emissions (direct + indirect) were 680 to 103,600 (20-yr) and were 374 to 38,108 (100-yr) Mg CO2-eq./yr. Analysis time horizon significantly affected emissions. The 20-yr direct and total emissions were consistently higher than the 100-yr emissions by up to 2.5 times. Detailed analysis of time-dependent climate effects can inform strategies to mitigate climate change impacts of landfill gas emissions.

High Prevalence of Antibiotic Resistance Bacteria Isolated From Bahir Dar City Municipal Solid Waste Dumpsite, North West Ethiopia.

The emergence and spread of antibiotic resistance (ABR) have been a public health challenge globally. The burden is even higher in low-income countries where there is a lack of appropriate healthcare systems, and inappropriate antibiotic disposal practices and utilization. Due to poor solid waste disposal practices in developing nations, municipal solid waste dumpsite (MSWDS) can be a reservoir for ABR bacteria. However, only a few studies demonstrated the prevalence of ABR in non-clinical environments such as MSWDS. This study assessed the prevalence of ABR bacteria at Bahir Dar City MSWDS, to understand the public health risks related to poor solid waste disposal systems. Nine soil samples were collected from the dumpsite. Bacteria were isolated, identified and tested for ABR. Seventy-one distinct colonies were isolated from all samples and identified into 10 bacterial genera based on morphological features and biochemical tests. For ABR tests, gentamicin (GN, 10 µg), streptomycin (ST, 30 µg), tetracycline (TE, 30 µg), ciprofloxacin (CIP, 5 µg), nalidixic acid (NAA, 30 µg), sulfonamide (SA, 250 µg), chloramphenicol (C, 30 µg), erythromycin (E, 15 µg), vancomycin (V, 30 µg), and amoxicillin (AMX, 25 µg) were used. The most frequently isolated bacteria were Staphylococcus (23%) followed by Escherichia species (17%). Ten isolates related to Bacillus spp. were excluded from the antibiotic sensitivity test as there is no standard regarding this genus in the Clinical and Laboratory Standards Institute. The overall antibiotic résistance rate was 95.08%, and most isolates were found to be resistant to amoxicillin (100%), nalidixic acid (75.5%), and vancomycin (75%). Substantial proportions of the isolates were also resistant to tetracycline (55.35%), streptomycin (54.5%), and sulfonamide (50%). The overall multidrug resistance (MDR) rate was 36.06%. This high level of ABR calls for urgent intervention in waste management systems and regular surveillance programs.

Enhanced thermophilic high-solids anaerobic digestion of organic fraction of municipal solid waste with spatial separation from conductive materials in a single reactor volume.

Despite benefits such as lower water and working volume requirements, thermophilic high solids anaerobic digestion (THSAD) often fails due to the rapid build-up of volatile fatty acids (VFAs) and the associated drop in pH. Use of conductive materials (CM) can promote THSAD through stimulation of direct interspecies electron transfer (DIET), while the need for their constant dosing due to poor separation from effluent impairs economic feasibility. This study used an approach of spatially separating magnetite and granular activated carbon (GAC) from the organic fraction of municipal solid waste (OFMSW) in a single reactor for THSAD. GAC and magnetite addition could both mitigate the severe inhibition of methanogenesis after VFAs build-up to ∼28-30 g/L, while negligible methane production was observed in the control group. The highest methane yield (286 mL CH4/g volatile solids (VS)) was achieved in magnetite-added reactors, while the highest maximum CH4 production rates (26.38 mL CH4/g VS/d) and lowest lag-phase (2.83 days) were obtained in GAC-added reactors. The enrichment of GAC and magnetite biofilms with various syntrophic and potentially electroactive microbial groups (Ruminiclostridium 1, Clostridia MBA03, Defluviitoga, Lentimicrobiaceae) in different relative abundances indicates the existence of specific preferences of these groups for the nature of CM. According to predicted basic metabolic functions, CM can enhance cellular processes and signals, lipid transport and metabolism, and methane metabolism, resulting in improved methane production. Rearrangement of metabolic pathways, formation of pili-like structures, enrichment of biofilms with electroactive groups and a significant improvement in THSAD performance was attributed to the enhancement of the DIET pathway. Promising results obtained in this work due to the spatial separation of the bulk OFMSW and CM can be useful for modeling larger-scale THSAD systems with better recovery of CM and cost-effectiveness.

Microplastics as carriers of antibiotic resistance genes and pathogens in municipal solid waste (MSW) landfill leachate and soil: a review.

Landfill leachate contains antibiotic resistance genes (ARGs) and microplastics (MPs), making it an important reservoir. However, little research has been conducted on how ARGs are enriched on MPs and how the presence of MPs affects pathogens and ARGs in leachates and soil. MPs possess the capacity to establish unique bacterial populations and assimilate contaminants from their immediate surroundings, generating a potential environment conducive to the growth of disease-causing microorganisms and antibiotic resistance genes (ARGs), thereby exerting selection pressure. Through a comprehensive analysis of scientific literature, we have carried out a practical assessment of this topic. The gathering of pollutants and the formation of dense bacterial communities on microplastics create advantageous circumstances for an increased frequency of ARG transfer and evolution. Additional investigations are necessary to acquire a more profound comprehension of how pathogens and ARGs are enriched, transported, and transferred on microplastics. This research is essential for evaluating the health risks associated with human exposure to these pollutants.

Simultaneously enhancement of methane production and active phosphorus transformation by sludge-based biochar during high solids anaerobic co-digestion of dewatered sludge and food waste: Performance and mechanism.

Biochar has been proved to improve methane production in high solids anaerobic co-digestion (HS-AcoD) of dewatered sludge (DS) and food waste (FW), but its potential mechanism for simultaneous methane production and phosphorus (P) transformation has not been sufficiently revealed. Results showed that the optimal preparation temperature and dosage of sludge-based biochar were selected as 300 °C and 0.075 g·g-1, respectively. Under this optimized condition, the methane production of the semi-continuous reactor increased by 54%, and the active phosphorus increased by 18%. The functional microorganisms, such as Methanosarcina, hydrogen-producing, sulfate-reducing, and iron-reducing bacteria, were increased. Metabolic pathways associated with sulfate reduction and methanogenesis, especially hydrogenotrophic methanogenesis, were enhanced, which in turn promoted methanogenesis and phosphorus transformation and release. This study provides theoretical support for simultaneously recovery of carbon and phosphorus resources from DS and FW using biochar.

Resilience towards organic load and activated sludge variations in co-fermentation for carboxylic acid production.

Two perturbations were investigated in acidogenic co-fermentation of waste activated sludge (WAS) and food waste in continuous mesophilic fermenters: increasing the organic loading rate (OLR) and changing the WAS. A control reactor maintained an OLR of 11 gVS/(L·d), while a test reactor had a prolonged OLR change to 18 gVS/(L·d). For each OLR, two WAS were studied. The change in OLR led to differentiated fermentation product profile without compromising the fermentation yields (∼300 mgCOD/gVS). At 11 gVS/(L·d), the product profile was dominated by acetic, butyric, and propionic acids while at 18 gVS/(L·d) it shifted to acetic acid, ethanol, and caproic acid. Reverting the OLR also reverted the fermentation profile. The biomass immigration with the WAS changed the fermentation microbial structure and introduced acetic acid-consuming methanogens, which growth was only delayed by the OLR increase. Microbial monitoring and post-fermentation tests can be used for early detection of acetic acid-consuming events.

Decreasing Greenhouse Gas Emissions from the Municipal Solid Waste Sector in Chinese Cites.

Municipal solid waste (MSW) management systems play a crucial role in greenhouse gas (GHG) emissions in China. Although the government has implemented many policies to improve the MSW management system, the impact of these improvements on city-level GHG emission reduction remains largely unexplored. This study conducted a comprehensive analysis of both direct and downstream GHG emissions from the MSW sector, encompassing sanitary landfill, dump, incineration, and biological treatment, across 352 Chinese cities from 2001 to 2021 by adopting inventory methods recommended by the Intergovernmental Panel on Climate Change (IPCC). The results reveal that (1) GHG emissions from the MSW sector in China peaked at 70.6 Tg of CO2 equiv in 2018, followed by a significant decline to 47.6 Tg of CO2 equiv in 2021, (2) cities with the highest GHG emission reduction benefits in the MSW sector were historical emission hotspots over the past 2 decades, and (3) with the potential achievement of zero-landfilling policy by 2030, an additional reduction of 203.7 Tg of CO2 equiv is projected, with the emission reduction focus toward cities in South China (21.9%), Northeast China (17.8%), and Southwest China (17.3%). This study highlights that, even without explicit emission reduction targets for the MSW sector, the improvements of this sector have significantly reduced GHG emissions in China.

Microplastics in the diet of Hermetia illucens: Implications for development and midgut bacterial and fungal microbiota.

In a world with a population exceeding 8 billion people and continuing to grow, pollution from food and plastic waste is causing long-term issues in ecosystems. Potential solutions may be found by exploiting insect-based bioconversion. In this context, we investigated the impact of polyvinyl chloride microparticles (PVC-MPs) on the development of Hermetia illucens (black soldier fly; BSF) and its midgut bacterial and fungal microbiota. The impact of PVC-MPs was evaluated feeding BSF larvae with a PVC-MPs-supplemented diet. The larvae exposed to different PVC-MPs concentrations (2.5%, 5%, 10% and 20% w/w) developed into adults with no significant increase in pupal mortality. Faster development and smaller pupae were observed when 20% PVC-MPs was provided. The BSF larvae ingest PVC-MPs, resulting in a reduction in MPs size. Larvae exposed to PVC-MPs did not exhibit differences in gut morphology. Regarding the impact of PVC-MPs on the structure of both bacterial and fungal communities, the overall alpha- and beta-diversity did not exhibit significant changes. However, the presence of PVC-MPs significantly affected the relative abundances of Enterobacteriaceae and Paenibacillaceae among the bacteria and of Dipodascaceae and Plectospharellaceae among the fungi (including yeast and filamentous life forms), suggesting that PVC-MP contamination has a taxa-dependent impact. These results indicate that BSF larvae can tolerate PVC-MPs in their diet, supporting the potential use of these insects in organic waste management, even in the presence of high levels of PVC-MP contamination.

Investigation of U.S. landfill GHG reporting program methane emission models.

As part of its commitment to the United Nations Framework Convention on Climate Change, the U.S. annually develops a national estimate of methane emissions from municipal solid waste (MSW) landfills by aggregating activity data from each facility. Since 2010, the U.S. has reported a 20 % decrease in MSW landfill emissions despite a 21 % increase in tons disposed. Operator-submitted data were investigated to understand the causes of this decline. In the U.S., operators of landfills with a gas collection and control system (GCCS) calculate their facility's emissions via two separate approaches - (1) first-order decay (FOD) and (2) collection efficiency assumption (CEA) - and select either result to feed into the annual inventory. The FOD model predicts methane generation proportional to waste disposal and that approach calculated a 19 % increase in total methane generated from 2010 to 2022, whereas generation via the CEA approach decreased by 8.9 %. The amount of measured methane collected has increased 7.5 % for the same years. Discrepancies between the two models' generated methane, assumed gas collection efficiencies, and oxidized methane compound into substantive differences in national estimates. Operators more frequently select the CEA method, which results in decreased national estimates. If only the FOD method was used, U.S. MSW landfill emissions would be 1.3-1.7 times greater than current estimates which is similar to recent extrapolations from remote sensing campaigns in the U.S. Both models contain parameters with large inherent uncertainty. Without measurement methods that continuously quantify both point-source and diffuse emissions, an assessment of either equation's accuracy cannot be made.

Discarded diversity: Novel megaphages, auxiliary metabolic genes, and virally encoded CRISPR-Cas systems in landfills.

Background: Viruses are the most abundant microbial entity on the planet, impacting microbial community structure and ecosystem services. Despite outnumbering Bacteria and Archaea by an order of magnitude, viruses have been comparatively underrepresented in reference databases. Metagenomic examinations have illustrated that viruses of Bacteria and Archaea have been specifically understudied in engineered environments. Here we employed metagenomic and computational biology methods to examine the diversity, host interactions, and genetic systems of viruses predicted from 27 samples taken from three municipal landfills across North America. Results: We identified numerous viruses that are not represented in reference databases, including the third largest bacteriophage genome identified to date (~678 kbp), and note a cosmopolitan diversity of viruses in landfills that are distinct from viromes in other systems. Host-virus interactions were examined via host CRISPR spacer to viral protospacer mapping which captured hyper-targeted viral populations and six viral populations predicted to infect across multiple phyla. Virally-encoded auxiliary metabolic genes (AMGs) were identified with the potential to augment hosts' methane, sulfur, and contaminant degradation metabolisms, including AMGs not previously reported in literature. CRISPR arrays and CRISPR-Cas systems were identified from predicted viral genomes, including the two largest bacteriophage genomes to contain these genetic features. Some virally encoded Cas effector proteins appear distinct relative to previously reported Cas systems and are interesting targets for potential genome editing tools. Conclusions: Our observations indicate landfills, as heterogeneous contaminated sites with unique selective pressures, are key locations for diverse viruses and atypical virus-host dynamics.

Study on the water retention curve of shredded municipal solid waste considering the compressibility of specimens based on the centrifuge method.

The water retention curve (WRC) of municipal solid waste (MSW) is the important hydraulic parameter for the study of unsaturated seepage analysis in landfills. Due to the compressibility and degradability of the waste, the search for a method to quickly and accurately test its water retention curve (WRC) is a current problem that needs to be solved. In this paper, considering the volume change of the waste specimens in test, the test principle of centrifuge testing of WRC is corrected to make it applicable to the testing of waste WRC. In addition, the WRCs of 20 MSW specimens with typical landfill compositions and porosities are measured using the corrected centrifuge test. The effects of compositions and porosities of waste specimens on WRC parameters were analyzed. The results are summarized as follows. Disregarding the height reduction of specimens resulted in overestimated matric suction values and underestimating volume water content values. By comparing uncorrected and corrected values, the maximum difference of the matric suction and volumetric water content reach 233 kPa and 11%, respectively. This study can provide a reference for accurately measuring the WRC of MSW using a centrifuge. For the waste specimen without kitchen and yard waste, composition had less of an effect on the WRC of waste compared to porosity. The effect of the content of the non-absorbable fraction on the residual volumetric water content θr and the parameter nv in the van Genuchten model was significant. The initial porosity n had a great effect on the parameter α.

Co-incineration of medical waste in municipal solid waste incineration increased emission of chlorine/brominated organic pollutants.

Co-incineration of medical waste (MW) in municipal solid waste incinerators (MSWIs) is a crucial disposal method for emergency disposal of MW and the management of MW in small and medium-sized towns. This study aims to analyze and compare the levels and distribution patterns of chlorine/brominated dioxins and their precursors in fly ash from MSWIs and medical waste incinerators (MWIs) while also focusing on identifying the new pollution concerns that may arise from the co-incineration of municipal solid waste (MSW) mixed with MW (MSW/MW). The concentration of chlorobenzene (CBzs), polychlorinated biphenyls (PCBs) and polychlorinated dibenzo-p-dioxins/dibenzofurans (PCDD/Fs) in fly ash from co-incineration of MSW/MW are 887.4, 134.4 and 27.6 µg/kg, respectively, which are 5.1, 2.0 and 2.9 times higher than that from MSWIs. The levels of polybrominated dibenzo-p-dioxins/dibenzofurans (PBDD/Fs) are about three orders of magnitude lower than that of PCDD/Fs. For the fly ash from MSWIs, the predominant PCDD/Fs congener is OCDD, which prefers synthesis and adsorption on fine-grained fly ash. For fly ash from MWIs, the major PCDD/Fs congeners are 1, 2, 3, 4, 6,7, 8-HpCDF, and OCDF, which prefer synthesis and adsorption on coarse-grained fly ash. Correlation analysis exhibited that both 1,2,3-TriCBz and 1,2,4-TriCBz in fly ash have a markedly linear correlation with PCDD/Fs and PCBs, but PBDD/Fs shows a poor negative correlation with PCDD/Fs.

Dynamic changes in dissolved organic matter during transport of landfill leachate in porous medium.

The dynamic changes in dissolved organic matter (DOM) during the transport of landfill leachate (LL) in porous medium should be explored, considering the high levels of DOM in the LL of municipal solid waste. Column experiments were carried out at 25 °C at a Darcy's flux of 0.29 cm/h for 2722 h to compare the transport of Cl-, ultraviolet absorbance at 254 nm (UV254), chemical oxygen demand (COD), and dissolved organic carbon (DOC) in the simulated porous medium by using the CXTFIT2.1 code. Results showed that the convection-dispersion equation (CDE) could describe Cl- transport well. The high levels of λ and D could be highly correlated with the physicochemical properties of the porous medium. The transport of the studied DOM with evident aromatic character could be described appropriately by the CDE model with the first-order reaction assumption, considering the similar variation trends of UV254, COD, and DOC in the effluent during experiments. Specifically, the values of retardation factor (R) were in the following order: DOC > UV254 > COD, whereas the low values of the first-order decay coefficient (k1) for DOC and COD were still higher than that for UV254. High contents of humic-like substances in the DOM with complex toxic components resulted in the natural low removal efficiencies of COD, DOC, and UV254 (≤ 23%), which could be confirmed by the variations of fluorescence index (FI) and humification index (HIX) in the effluent. The results should be helpful in evaluating the environmental risk induced by the LL leakage in a landfill site.

Integrating advanced techniques and machine learning for landfill leachate treatment: Addressing limitations and environmental concerns.

This review article explores the challenges associated with landfill leachate resulting from the increasing disposal of municipal solid waste in landfills and open areas. The composition of landfill leachate includes antibiotics (0.001-100 µg), heavy metals (0.001-1.4 g/L), dissolved organic and inorganic components, and xenobiotics including polyaromatic hydrocarbons (10-25 µg/L). Conventional treatment methods, such as biological (microbial and phytoremediation) and physicochemical (electrochemical and membrane-based) techniques, are available but face limitations in terms of cost, accuracy, and environmental risks. To surmount these challenges, this study advocates for the integration of artificial intelligence (AI) and machine learning (ML) to strengthen treatment efficacy through predictive analytics and optimized operational parameters. It critically evaluates the risks posed by recalcitrant leachate components and appraises the performance of various treatment modalities, both independently and in tandem with biological and physicochemical processes. Notably, physicochemical treatments have demonstrated pollutant removal rates of up to 90% for various contaminants, while integrated biological approaches have achieved over 95% removal efficiency. However, the heterogeneous nature of solid waste composition further complicates treatment methodologies. Consequently, the integration of advanced ML algorithms such as Support Vector Regression, Artificial Neural Networks, and Genetic Algorithms is proposed to refine leachate treatment processes. This review provides valuable insights for different stakeholders specifically researchers, policymakers and practitioners, seeking to fortify waste disposal infrastructure and foster sustainable landfill leachate management practices. By leveraging AI and ML tools in conjunction with a nuanced understanding of leachate complexities, a promising pathway emerges towards effectively addressing this environmental challenge while mitigating potential adverse impacts.

Laboratory investigation and prediction of permeability of fresh to five-year-old municipal solid wastes of low and high food contents.

The permeability of municipal solid wastes (MSWs) is important for the design and operation of landfills. This study presented the experimental investigation of the permeability of low food content- (LF-) and high food content- (HF-) MSWs prepared in laboratory-scale bioreactors for up to 5 years. The permeability of MSWs with diverse degrees of decomposition (DOBs), void ratios, and permeation liquids was measured (288 tests). The measured permeability was compared to that predicted from the (modified) Kozeny-Carman (K-C) equations in four different forms. The results indicated that the permeability of both LF- and HF-MSWs decreased significantly (p < 0.05) with decomposition under a given void ratio. The predicted permeability using the original K-C equation fitted well with that of fresh MSWs. The permeability of decomposed MSWs was closer to the predicted results using the modified K-C equation with the effective void ratio. This can be attributed to the increase in the fine fractions due to degradation. The reduction in the effective voids was more significant with HF-MSWs. The parameters required in the (modified) K-C equations showed a good correlation with DOB and effective particle size (d10). The predicted permeability based on the relationship between DOB (or d10) and equation parameters was within 3 times the difference compared to the measured values. The above results indicated that the modified K-C equation can be adopted to predict the permeability of fresh and degraded MSWs while more field-scale experiments should be conducted to further evaluate its feasibility.

Reduction of heavy metals in municipal solid waste incineration fly ash followed by making transparent glass.

Municipal solid waste incineration (MSWI) fly ash is a hazardous waste containing heavy metals. Secondary aluminum dross (SAD) is a hazardous waste discharged from aluminum smelting, containing active aluminum nitride (AlN). In this work, heavy metals from MSWI fly ash were reduced into alloy by AlN from SAD, and the slag was manufactured into transparent glass for building. Reduction of iron and zinc was 67 and 100 %, respectively. Reduction mechanism was explored after applying XRD, XRF and thermodynamics analysis. It was found that the reduction reaction was an ion reaction. The AlN and heavy metal oxide transformed into anionic group containing nitrogen and heavy metal cation, after entering slag. The heavy metals were reduced into alloy after electron was transferred from anionic group to cation. In addition, the reduced iron and zinc could merge into alloy, which inhibited evaporation of zinc. Yellow transparent glass was obtained after the reduction process. Yellow was come from titanium oxide, which could not be reduced by AlN. Microhardness, density and water absorption of the transparent glass were 741 HV, 2.86 g·cm-3 and 0.04 %, respectively. Leaching content of Ni, Cu, Zn and Pb of the glass were 0.1, <0.1, 0.6 and < 0.1 mg/L, respectively, all below the TCLP limit. About 115 âˆ¼ 213 dollars were earned after manufacturing 500 kg of MSWI fly ash into transparent glass. This work provided a novel idea of recycling solid waste into alloy and transparent glass for building.

Optimization and application of pretreatment method of microplastics detection in municipal solid waste landfills.

The landfill is one of the most important sources of microplastics (MPs). The pretreatment method is a precondition of microplastics study for the presence of complex substances in landfills. Therefore, it is essential to examine the impact of different pretreatment methods on the microplastics detection. A literature review and a comparison experiment on digestion solutions were performed to establish a comprehensive identification method for MPs in landfills. When exposed to of 30 % H2O2, minimal mass reduction of PE, PP and PET were 4.00 %, 3.00 % and 3.00 % respectively, and the least surface damage was observed in MPs, while exhibiting the most optimal peak value for infrared spectral characteristics. It is demonstrated that the effect of 30 % H2O2 dissolution was superior compared to 10 % KOH and 65 % HNO3. The method was subsequently utilized to investigate the distribution of MPs in a landfill. The dominant MPs were polyethylene (PE, 18.56-23.91 %), polyethylene terephthalate (PET, 8.80-18.66 %), polystyrene (PS, 10.31-18.09 %), and polypropylene (PP, 11.60-14.91 %). The comprehensive identification method of "NaCl density separation + 30 % H2O2 digestion + NaI density separation + sampling microscope + Mirco-FTIR" is suitable for the detection of MPs in landfills.