Atomically dispersed ternary FeCoNb active sites anchored on N-doped honeycomb-like mesoporous carbon for highly catalytic degradation of 4-nitrophenol.

In the last decades, 4-nitrophenol is regarded as one of highly toxic organic pollutants in industrial wastewater, which attracts great concern to earth sustainability. Herein, atomically dispersed ternary FeCoNb active sites were incorporated into nitrogen-doped honeycomb-like mesoporous carbon (termed FeCoNb/NHC) by a two-step pyrolysis strategy, whose morphology, structure and size were characterized by a set of techniques. Further, the catalytic activity and reusability of the as-prepared FeCoNb/NHC were rigorously examined by using 4-NP catalytic hydrogenation as a proof-of-concept model. The influence of the secondary pyrolysis temperature on the catalytic performance was investigated, combined by illuminating the catalytic mechanism. The resultant catalyst exhibited significantly enhanced catalytic features with a normalized rate constant (kapp) of 1.2 × 104 min-1g-1 and superior stability, surpassing the home-made catalysts in the control groups and earlier research. This study provides some constructive insights for preparation of high-efficiency and cost-effectiveness single-atom nanocatalysts in organic pollutants environmental remediation.

Guiding nitrogen doped vanadium pentoxide nanoclusters on cobalt sulfide nano-flakiness as stable seamless interface anode toward highly energy density and durable asymmetric supercapacitors.

Interaction of the interface-heterostructures is crucial to rapid ionic conductivity and highly energy density of electrode materials toward supercapacitors. Herein, a novel anode heterostructure is synthesized using cobalt sulfide (CoS) nanoflowers as a substrate for composite nitrogen doped vanadium pentoxide (denoted as N-V2O5@CoS) by combination of hydrothermal and calcination method. As expected, the N-V2O5@CoS electrode possesses superhigh specific surface area that significantly enhances the specific capacitance, and its unique porous interconnected structure not only reduces the volume effect during the cycles, but also greatly enhances the conductivity of electron transfer. The as-prepared N-V2O5@CoS electrode has a specific capacitance of up to 2413.6F/g at a current density of 1 A/g, and can still maintain 87.51 % of the initial capacitance after 5,000 cycles at a high current density of 10 A/g. More importantly, the partial density of states (PDOS) ares obtained through theoretical calculations reveal that the interaction of heterogeneous interfaces is contributed by the p-orbitals of C, O and S and d-orbitals of V and Co. In addition, asymmetric supercapacitor (ASC) with N-V2O5@CoS as the positive electrode and activated carbon (AC) as the negative electrode has a high voltage of 1.7 V, which achieves an outstanding energy density of 71.6 W h kg-1 at a power density of 849.8 W kg-1, showing excellent cycle stability (retain 90.6 % of the initial capacitance after 10,000 charge/discharge cycles). This paper offers novel paradigm for the doping of metal oxides and the development of heterostructures, which provides support for their use as advanced energy storage materials.

N-Doped Porous Carbon Based on Anion and Cation Storage Chemistry for High-Energy and Power-Density Zinc Ion Capacitor.

Zinc ion hybrid capacitors (ZIHCs) show promise for large-scale energy storage because of their low cost, highly intrinsic safety, and eco-friendliness. However, their energy density has been limited by the lack of advanced cathodes. Herein, a high-capacity cathode material named N-doped porous carbon (CFeN-2) is introduced for ZIHCs. CFeN-2, synthesized through the annealing of coal pitch with FeCl3·6H2O as a catalytic activator and melamine as a nitrogen source, exhibits significant N content (10.95 wt%), a large surface area (1037.66 m2 g-1), abundant lattice defects and ultrahigh microporosity. These characteristics, validated through theoretical simulations and experimental tests, enable a dual-ion energy storage mechanism involving Zn2+ ions and CF3SO3 - anions for CFeN-2. When used as a cathode in ZIHCs, CFeN-2 achieves a high-energy density of 142.5 W h kg-1 and a high-power density of 9500.1 W kg-1. Furthermore, using CFeN-2 ZIHCs demonstrate exceptional performance with 77% capacity retention and nearly 100% coulombic efficiency after 10 000 cycles at 10 A g-1, showcasing substantially superior performance to current ZIHCs. This study offers a pathway for developing high-energy and high-power cathodes derived from coal pitch carbon for ZIHC applications.

N-doped carbon nanospheres synthesized from a newly designed eco-friendly sustainable polymer for highly selective CO2 capture.

N-doped carbon nanospheres and porous carbon were produced by a hydrothermal template and the activation of hexamethylenetetramine (HMTA as a nitrogen source and activator) and ZnCl2 (only as an activator) from a poly(Ri-S-ε-CL-PDMS) multiblock/graft copolymer produced using a renewable resource and eco-friendly autoxidation. N-doped carbon nanospheres (PPiSiHMTA) exhibited excellent CO2 adsorption (2.73 mmol/g at 0 °C and 0.15 atm, 1.72 mmol/g at 25 °C and 0.15 atm) and CO2/N2 selectivity (344-512). Despite the higher BET surface area and pore volume, porous carbon (PPiSi) showed low CO2 adsorption (1.21 and 0.71 mmol/g, 0.15 atm) and CO2/N2 selectivity (57 and 112). PPiSiHMTA and PPiSi have low isosteric heats of adsorption (Qst, 18-33 kJ/mol) and stability in humid environments. In addition, PPiSiHMTA exhibited an excellent CO2 recycling performance. The experimental data on CO2 adsorption was evaluated using various isotherm models, including Freundlich, Langmuir, Sips, and Temkin. The results demonstrated a nearly perfect fit between the Freundlich isotherm and the experimental data, indicating the heterogeneous nature of the adsorbent surfaces. Our study is promising for industrial applications, offering excellent CO2 adsorption, CO2/N2 selectivity, moisture stability, and porous material fabrication strategies.

Phosphorus vacancies regulation and heterogeneous interfacial engineering of coral-like ZnO/FeCoPv@N-doped carbon hierarchical microspheres to boost overall water splitting.

Vacancy engineering and heterostructure construction are regarded as potent approaches for synergistically boosting hydrogen production in renewable energy conversion. Herein, a selective phosphorization strategy was implemented to fabricate coral-like ZnO/FeCoP@N-doped carbon hierarchical microspheres (ZnO/FeCoP@NCHMS) via only controllably phosphorizing the Co and Fe atoms in a precursor, which was formed by generating ZnCoFe LDH on the surface of a zinc cobalt coordination polymer microsphere. Then, by adopting a reduction treatment for ZnO/FeCoP@NCHMS, the innovative ZnO/FeCoPv@NCHMS with abundant phosphorus vacancies (Pv) was realized. The introduction of phosphorus vacancy could optimize the electronic structures of metal phosphides and accelerate the reconstruction of active species, thus speeding up the reaction kinetic. Likewise, the plentiful heterointerfaces greatly expedite the transfer of electrons and protons, exposing ultra-high active sites. By virtue of these fascinating characters and the unique coral-like hierarchical architecture, the as-prepared ZnO/FeCoPv@NCHMS reveal preeminent electrocatalytic activities, and the overpotentials for the oxygen evolution reaction (OER) and the hydrogen evolution reaction (HER) are as low as 177 and 173 mV at 10 mA cm-2 in alkaline medium, respectively. Impressively, the water electrolysis device assembled by ZnO/FeCoPv@NCHMS requires a mere cell voltage of 1.508 V to attain a current density of 10 mA cm-2. Furthermore, the ZnO/FeCoPv@NCHMS also demonstrate extraordinary durability, sustaining operation for at least 28 h (at 100 mA cm-2) during the water splitting process. This study provides novel insights into defect regulation and heterointerface construction for overall water splitting.

In-situ construction of N-doped Zn0.6Cd0.4S/oxygen vacancy-rich WO3 Z-scheme heterojunction compound for boosting photocatalytic hydrogen production.

Photocatalytic water splitting technology for H2 production represents a promising and sustainable approach to clean energy generation. In this study, a high concentration of oxygen vacancies was introduced into tungsten trioxide (WO3) to create a vacancy-rich layer. This modified WO3 (WO3-x) was then combined with N-doped Zn0.6Cd0.4S through a hydrothermal synthesis, resulting in the formation of a Z-scheme heterojunction composite aimed at enhancing photocatalytic performance. Under visible light, the H2 production activity of the composite reached an impressive 8.52 mmol·g-1 without adding co-catalyst Pt. This corresponds to enhancements of 7.82 and 4.39 times the production yield of pure ZCS and ZCSN, respectively. However, the hydrogen production increased to 21.98 mmol·g-1 when Pt was added as a co-catalyst. Furthermore, an array of characterizations were employed to elucidate the presence of oxygen vacancies and the establishment of the Z-scheme heterojunction. This structural enhancement significantly facilitates the utilization of photo-generated electrons while effectively preventing photo-corrosion of ZCSN, thus improving material stability. Our study provides a new scheme for the incorporation of oxygen-rich vacancy and the construction of Z-scheme heterojunction, demonstrating a synergistic effect that greatly advances photocatalytic performance.

Supported Cu3 cluster on N-doped graphene: An efficient triatom catalyst for CO electroreduction to propanol at low potential.

Electroreduction of carbon monoxide into high-energy fuel is an excellent energy strategy for sustainable development, but the high yield of multi-carbon products remains a difficult challenge. Inspired by the successful synthesis of various trimer metal clusters and studies on electrocatalysis of CO to C3 products by Cu-based catalysts, Cu3 supported on N-doped graphene structures (Cu3@NG) are investigated as electrocatalysts for CORR toward propanol in this paper. Due to the appropriate Cu-Cu bond length, the moderate charge of the Cu site, mild CO adsorption energy, and 100 % CO coverage, the absorbed 3*CO substance can form the critical *CO-CO-CO intermediate with a rather low kinetic barrier of 0.25 eV. The limiting potential of the whole process for the formation of propanol is just -0.15 V. Our work not only showed that Cu3@NG is an excellent catalyst for the formation of propanol with high selectivity at low potential but also indicated that the *CO coverage can greatly reduce the CO hydrogenation potential and bonding of some intermediates such as *CH2O. This research will provide a new idea for the material design of products tending to multi-carbon.

Two birds with one stone: Bimetallic ZnCo2S4 polyhedral nanoparticles decorated porous N-doped carbon nanofiber membranes for free-standing flexible anodes and microwave absorption.

Cost-efficient material with an ingenious design is important in the engineering applications of flexible energy storage and electromagnetic (EM) protection. In this study, bimetallic ZnCo2S4 (ZCS) polyhedral nanoparticles homogenously embedded in the surface of porous N-doped carbon nanofiber membranes (ZCS@PCNFM) have been fabricated by electrospinning technique combined with carbonization and hydrothermal processes. As a self-assembled electrode for lithium-ion batteries (LIBs), the bimetallic ZCS nanoparticles possess rich redox reactions, good electrical conductivity, and pseudocapacitive properties, while the three-dimensional (3D) multiaperture architecture of the nanofiber film not only shortens the transfer spacing of lithium ions and electrons but also effectively tolerates the volume variation during lithiation and delithiation cycles. Benefiting from the above merits, the ZCS@PCNFM electrode exhibits good cycle performance (662.3 mA h/g at 100 mA/g after 100 cycles), superior rate capacity (401.3 mA h/g at 1 A/g) and an extremely high initial specific capacity of 1152.2 mAh/g at 100 mA/g. Meanwhile, depending on the hierarchical nanostructure and multi-component heterogeneous interface effects constructed by 3D inlaid architecture, the ZCS@PCNFM nanocomposite exhibits fascinating microwave absorption (MA) characteristics with a superhigh reflection loss (RL) of -49.7 dB at a filling content of only 20 wt% and corresponding effective absorption bandwidth (EAB, RL<-10 dB) of 5.2 GHz ranging from 12.8 to 18.0 GHz at 2.2 mm.

XG and CS-based self-assembled nanocomposite hydrogel embedding fluorescent NCQDs capable of detection and adsorptive removal of the polar MO and Cr(VI) pollutants.

Aiming at dealing with organic and inorganic pollutants dissolved in aquatic environments, we introduce self-assembled fluorescent nanocomposite hydrogel based on a binary polysaccharide network (xanthan gum/chitosan) embedding nitrogen-doped carbon quantum dots not only as a hybrid solid optical sensor for detecting Cr(VI) ions but also to remove anionically charged contaminants Cr(VI) and methyl orange (MO) by acting as an adsorbent. This fluorescent nanocomposite achieved a detection limit of 0.29 µM when used to detect Cr(VI) and demonstrated a fluorescence quantum yield of 59.7 %. Several factors contributed to the effectiveness of the adsorption of Cr(VI) and MO in batch studies, including the solution pH, dosage of the adsorbent, temperature, initial contamination level, and contact time. Experimental results showed 456 mg/g maximum adsorption capacity at pH 4 for MO compared to 291 mg/g at pH 2 for Cr(VI) at 25 °C. In addition to conforming to Langmuir's model, Cr(VI) and MO's adsorption kinetics closely matched pseudo-second-order. Using thermodynamic parameters, the results indicate that Cr(VI) and MO adsorb spontaneously and exothermically. Recycling spent adsorbent for Cr(VI) and MO using NaOH at 0.1 M was possible; the respective adsorption efficiency remained at approximately 82.2 % and 83 % after the fifth regeneration cycle.

Orbicular-Donor-Acceptor System in N-doped Nanographene for Highly Efficient NIR-II Photothermal Therapy.

Developing stable and efficient photothermal agents (PTAs) for the second near-infrared window (NIR-II, 1 000-1700 nm) photothermal therapy (PTT) is highly desirable but remains challenging. Herein, a facile strategy to prepare NIR-II nano-PTA based on the ionic N-doped nanographene hexapyrrolohexaazacoronene (HPHAC) is reported featuring a specific orbicular-donor-acceptor (O-D-A) structure. Oxidizing HPHAC 1 to dication 12+ causes a substantial decrease in its band gap, leading to a shift in absorption from the confined UV region to a broad absorption range that reaches up to 1400 nm. The dication 12+ exhibits global aromaticity and excellent stability. Theoretical investigation demonstrates that the strong NIR-II absorption of 12+ is attributed to a distinct inner-to-outer intramolecular charge transfer. Encapsulating 12+ with amphiphilic polymers results in water-soluble 12+ NPs with retained optical characteristics. The 12+ NPs exhibit exceptional biocompatibility, intense photoacoustic responses, and a high photothermal conversion efficiency of 72% under the 1064 nm laser irradiation, enabling efficient PTT of cancer cells. The "O-D-A" system on HPHAC, which is created by a simple redox approach, provides a novel strategy to construct efficient NIR-II photothermal materials through molecular engineering of nanographenes.

The biochar derived from Spirulina platensis for the adsorption of Pb and Zn and enhancing the soil physicochemical properties.

Microalgae can be collected in large quantities and hold significant potential for environmental remediation, offering a cost-effective solution. This study explores the use of Spirulina platensis (SP) as feedstock for biochar production. SP contains abundant nitrogen-rich components, such as proteins, which can serve as nitrogen sources. We prepared SP-derived biochar through pyrolysis for the adsorption of Pb and Zn from aqueous solutions and used it as an amending agent to remediate heavy metal-contaminated agricultural soil. Pyrolysis of proteins in SP introduces nitrogen-functional groups, resulting in nitrogen-doped biochar. We investigated the surface chemical behavior of thermally treated SP using X-ray photoelectron spectroscopy and Fourier-transform infrared spectroscopy. Surface analysis revealed the presence of pyridine-N and pyrrole-N from protein pyrolysis products. The study also demonstrated that these functional groups affect interactions with heavy metals. Batch experiments examined the effects of pH and initial concentration on the adsorption of Pb and Zn using SP400 and SP600. Both types of biochar showed satisfactory performance in adsorbing Pb and Zn. The effect of SP400 and SP600 on the removal of Pb and Zn through the physicochemical properties and surface functional groups was investigated. Analysis of SP400 and SP600 highlighted that electrostatic interactions, cation exchange, complexation, and mineral precipitation contributed to Pb and Zn adsorption. The study concludes that SP-derived biochar, particularly SP600, is effective for immobilizing Pb and Zn in contaminated agricultural soil, with SP600 showing superior performance.

A handy way for forming N-doped TiO2/carbon from pectin and d,l-serine hydrazide hydrochloride.

N-doped TiO2/carbon composites (N-TiPC) have shown excellent photodegradation performances to the organic contaminants but are limited by the multistage preparation (i.e., preparation of porous carbon, preparation of N-doped TiO2, and loading of N-doped TiO2 on porous carbon). Here, we develop a handy way by combining the Pickering emulsion-gel template route and chelation reaction of polysaccharides. The N-TiPC is obtained by calcinating pectin/Dl-serine hydrazide hydrochloride (SHH)-Ti4+ chelate and is further described by modern characterization techniques. The results show that the N atom is successfully doped into the TiO2 lattice, and the bandgap value of N-TiPC is reduced to 2.3 eV. Moreover, the particle size of N-TiPC remains about 10 nm. The configurations of the composites are simulated using DFT calculation. The photocatalytic experiments show that N-TiPC has a high removal efficiency for methylene blue (MB) and oxytetracycline hydrochloride (OTC-HCL). The removal ratios of MB (20 mg/L, 50 mL) and OTC-HCL (30 mg/L, 50 mL) are 99.41 % and 78.29 %, respectively. The cyclic experiments show that the photocatalyst has good stability. Overall, this study provides a handy way to form N-TiPC with enhanced photodegradation performances. It can also be promoted to other macromolecules such as cellulose and its derivatives, sodium alginate, chitosan, lignin, etc.

Mechanisms of N-doped microporous biochar decreased Cd transition in rhizosphere soils and its impact on soil bacterial community composition.

Soil cadmium (Cd) contamination has garnered considerable attention. This study employed batch sorption experiments and rhizobox experiments to examine the impact of nitrogen-doped microporous biochar (NBB) on the temporal and spatial distribution of Cd in the rhizosphere of rice plants, with the aim of elucidating the underlying mechanisms. The results indicated that the adsorption of Cd(II) onto NBB was predominantly governed by chemical reactions. When applied to soil, the NBB significantly hindered the migration of Cd from the bulk soil to the rhizosphere. Additionally, the application of NBB decreased the redox potential (Eh) in the rhizosphere soil and increased the relative abundance of Anaeromyxobacteraceae, Geobacteraceae, Desulfurisporaceae, and Syntrophomonadaceae, which could facilitate the reduction of soil Cd availability. Furthermore, the NBB2 treatment encouraged the formation of iron plaque on the root surface, thereby limiting the uptake of Cd from the soil into the root system. Moreover, the N-doped microporous biochar treatment resulted in lower Cd levels in the stele of root, an effect that was associated with increased sulfur (S) content in the stele and epidermis, suggesting a potential role for S in Cd sequestration. Ultimately, the application of N-doped microporous biochar resulted in diminished Cd accumulation in the rice tissues.

Accelerating the Hydrogen Evolution Kinetics with a Pulsed Laser-Synthesized Platinum Nanocluster-Decorated Nitrogen-Doped Carbon Electrocatalyst for Alkaline Seawater Electrolysis.

Efficient and durable electrocatalysts for the hydrogen evolution reaction (HER) in alkaline seawater environments are essential for sustainable hydrogen production. Zeolitic imidazolate framework-8 (ZIF-8) is synthesized through pulsed laser ablation in liquid, followed by pyrolysis, producing N-doped porous carbon (NC). NC matrix serves as a self-template, enabling Pt nanocluster decoration (NC-Pt) via pulsed laser irradiation in liquid. NC-Pt exhibits a large surface area, porous structure, high conductivity, N-rich carbon, abundant active sites, low Pt content, and a strong NC-Pt interaction. These properties enhance efficient mass transport during the HER. Remarkably, the optimized NC-Pt-4 catalyst achieves low HER overpotentials of 52, 57, and 53 mV to attain 10 mA cm-2 in alkaline, alkaline seawater, and simulated seawater, surpassing commercial Pt/C catalysts. In a two-electrode system with NC-Pt-4(-)ǀǀIrO2(+) as cathode and anode, it demonstrates excellent direct seawater electrolysis performance, with a low cell voltage of 1.63 mV to attain 10 mA cm-2 and remarkable stability. This study presents a rapid and efficient method for fabricating cost-effective and highly effective electrocatalysts for hydrogen production in alkaline and alkaline seawater environments.

N-doped lignin-based activated carbon aerogel derived from bamboo black pulp liquor for efficient removal of malachite green in wastewater.

In this study, a lignin-based aerogel (LA) was prepared through acid precipitation of BPBL, followed by sol-gel method and freeze-drying. Additionally, a one-step activation-carbonization method was used to acquire nitrogen-doped lignin-based activated carbon aerogel (NLACA). The adsorption and catalytic degradation performance for malachite green (MG) were examined. The specific surface area of NLACA after N-doping was 2644.5 m2/g. The adsorption capacity for MG was increased to 3433 mg/g with the presence of nitrogenous functional groups on surface of NLACA compared without N-doping. Meanwhile, non-radical singlet oxygen is the primary active substance and degradation efficiency arrives at 91.8% after the catalytic degradation within 20 min and it has good stability and reuse. Three possible degradation pathways during degradation were analyzed by LC-MS technique. The adsorption isotherm and kinetic data demonstrated conformity with both the Langmuir model and the pseudo-second-order kinetic model. The primary mechanisms of the adsorption for MG dyes on NLACA include hydrogen bonding, π-π interactions, attraction of electrostatic and pore filling. Hence, NLACA derived from BPBL acts as a cost-effective and high-performance adsorbent and catalyst for removal of MG in dye wastewater. This concept introduces an innovative approach of "treatment of waste with waste" for developing a low-consumption, high-efficiency dye wastewater treatment and provides significant reference to treatment dye wastewater.

N-Doped Carbon Dots for Selective Detection of Fe3+ and Degradation of Fe3+/Basic Red 9 Complexes in Water Samples.

In this work, the eco-friendly N-doped carbon dots KF-CDs and A-CDs were derived from kiwifruit by a simple one-step hydrothermal strategy at 180 °C for 6 h. KF-CDs have a high fluorescence quantum yield (27.85%), it is obviously rapid quenched by Fe3+, and have a good linear relationship from 1 to 8.26 µM (the detection limit was 0.077 µM). Basic red 9 is extensively used in biological, environmental and industry. Although it makes a great contribution to the economy, its toxicity should be taken seriously, especially with harmful metal ions. Within 2 h, A-CDs could degrade basic red 9 with degradation efficiency 89.6%, even though there was a stable compound formed with Fe3+ that the degradation efficiency was up to 88.3%. The results complement the research blank of carbon dots in catalytic degradation of basic red 9.

Multicolor nitrogen-doped carbon quantum dots and its application in the detection of Fe3+ ion.

In this paper, nitrogen-doped carbon quantum dots (N-CQDs) are synthesized by the hydrothermal method. N-CQDs exhibit strong fluorescence, and N-CQDs are well dispersed in water as well as in various organic solvents. N-CQDs emit multi-color fluorescence from blue to red, with wavelengths in the range of 450-650 nm without the need for purification. Furthermore, the fluorescence emission of N-CQDs was selectively quenched after adding Fe3+ ions. N-CQDs were used as a nanoprobe for the detection of Fe3+ ions, showing a good linear correlation between the fluorescence emission and the concentration of Fe3+ in the Fe3+ concentration range from 0 to 100 µM. The limit of detection (LOD) was 55.7 µM for Fe3+ in water and 40.2 µM in fetal bovine serum (FBS) samples. The study shows that the synthesized N-CQDs have low cost and great potential for application in biological analysis.

UPCYCLING OF CHITIN TO CROSS-COUPLING CATALYSTS: TAILORED SUPPORTS AND OPPORTUNITIES IN MECHANOCHEMISTRY.

In this study chitin derived from shrimp shells was used in the design of heterogeneous Pd-based catalysts for Heck and Suzuki-Miyaura cross-coupling reactions. The synthesis of Pd nanoparticles supported on N-doped carbons was performed through different approaches, including a sustainable mechanochemical approach, by using a twin-screw extruder. All catalytic systems were characterized by a multitechnique approach and the effect of nanoparticles size, N-doping on the support, and their synergistic interactions were elucidated. Specifically, Kelvin Probe Atomic Force Microscopy provided valuable insights on charge transfer and metal-support interactions. The catalytic behaviour of the samples was investigated in cross-coupling reactions under batch conditions and under semi-continuous flow solvent-free conditions, respectively obtaining a quantitative yield and a noteworthy productivity of 8.7 mol/(gPdh).

Application of N-doped NiCo2O4/NiO/Co3O4composites rich in oxygen vacancies in electromagnetic wave absorption.

In this work, N-doped and oxygen vacancy-rich NiCo2O4/NiO/Co3O4composites are synthesized by the direct calcination method. Noticeably, by changing the additive concentrations of urea dissolved in DMF (N-N dimethylformamide), the electromagnetic wave (EMW) absorption abilities of NiCo2O4/NiO/Co3O4composite effectively. A maximum reflection loss (RLmax) value at 12.94 GHz for a 2.8 mm thick sheet is -29.76 dB, while its effective absorption bandwidth (RL < -10 dB) reaches 4.21 GHz. In-depth research of possible mechanisms of EMW absorption enhancement. Owing to its simple preparation method and superb EMW absorption properties, the NiCo2O4/NiO/Co3O4composites have a chance to be suitable candidates for high-property EMW absorbers.

Fe Single Atoms Anchored on N-doped Mesoporous Carbon Microspheres for Promoted Oxygen Reduction Reaction.

Fe single atoms (Fe SAs) based catalysts have received much attention in electrocatalytic oxygen reduction reaction (ORR) due to its low-cost and high activity. Yet, the facile synthesis of efficient and stable Fe SAs catalysts are still challenging. Here, we reported a Fe SAs anchored on N-doped mesoporous carbon microspheres (NC) catalyst via spraying drying and pyrolysis processes. The highly active Fe SAs are uniformly distributed on the NC matrix, which prevented the aggregation benefiting from the enhanced Fe-N bonds. Also, the mesoporous carbon structure is favorable for fast electron and mass transfer. The optimized Fe@NC-2-900 catalyst shows positive half wave potential (E1/2 = 0.86 V vs reversible hydrogen electrodes (RHE)) and starting potential (Eonset = 0.98 V vs RHE) in ORR, which is comparable to the commercial Pt/C catalyst (E1/2= 0.87 V, Eonset = 1.08 V). Outstanding stability with a current retention rate of 92.5% for 9 hours and good methanol tolerance are achieved. The assembled zinc-air batteries showed good stability up to 500 hours at a current density of 5 mA cm-2. This work shows potentials of Fe SAs based catalysts for the practical application in ORR and pave a new avenue for promoting their catalytic performances.