Natural dyes developed by microbial-nanosilver to produce antimicrobial and anticancer textiles.

Developing special textiles (for patients in hospitals for example) properties, special antimicrobial and anticancer, was the main objective of the current work. The developed textiles were produced after dyeing by the novel formula of natural (non-environmental toxic) pigments (melanin amended by microbial-AgNPs). Streptomyces torulosus isolate OSh10 with accession number KX753680.1 was selected as a superior producer for brown natural pigment. By optimization processes, some different pigment colors were observed after growing the tested strain on the 3 media. Dextrose and malt extract enhanced the bacteria to produce a reddish-black color. However, glycerol as the main carbon source and NaNO3 and asparagine as a nitrogen source were noted as the best for the production of brown pigment. In another case, starch as a polysaccharide was the best carbon for the production of deep green pigment. Peptone and NaNO3 are the best nitrogen sources for the production of deep green pigment. Microbial-AgNPs were produced by Fusarium oxysporum with a size of 7-21 nm, and the shape was spherical. These nanoparticles were used to produce pigments-nanocomposite to improve their promising properties. The antimicrobial of nanoparticles and textiles dyeing by nanocomposites was recorded against multidrug-resistant pathogens. The new nanocomposite improved pigments' dyeing action and textile properties. The produced textiles had anticancer activity against skin cancer cells with non-cytotoxicity detectable action against normal skin cells. The obtained results indicate to application of these textiles in hospital patients' clothes.

Comparative Anti-inflammatory Activity of a Nanocomposite-Based Herbal Oral Rinse and a Commercial Oral Rinse.

INTRODUCTION: The present study aimed to evaluate and compare the anti-inflammatory effects of two oral rinse formulations, a commercial oral rinse and an Ocimum tenuiflorum and Ocimum gratissimum (nanocomposites, NCs) oral rinse, using in vitro assays commonly employed to assess anti-inflammatory activity. MATERIALS AND METHODS: The anti-inflammatory potential of the oral rinse formulations was assessed using bovine serum albumin (BSA) denaturation, egg albumin denaturation, and membrane stabilization assays. Diclofenac sodium was used as a reference standard in all assays. The inhibition percentages of BSA denaturation and egg albumin denaturation assays, as well as membrane stabilization effects, were measured at various concentrations of the oral rinse formulations. RESULTS: Both the commercial oral rinse and the Ocimum tenuiflorum and Ocimum gratissimum oral rinse demonstrated significant inhibition of BSA denaturation, indicating their anti-inflammatory potential. The Ocimum tenuiflorum and Ocimum gratissimum (NCs) oral rinse consistently showed higher inhibition percentages than the commercial oral rinse, suggesting stronger anti-inflammatory effects in this assay. In the egg albumin denaturation assay, both formulations exhibited inhibition of protein denaturation, with the Ocimum tenuiflorum and Ocimum gratissimum (NCs) oral rinse showing comparable or slightly higher inhibition percentages. The membrane stabilization assay further supported the anti-inflammatory properties of both formulations, with the Ocimum tenuiflorum and Ocimum gratissimum (NCs) oral rinse demonstrating efficacy comparable to diclofenac sodium. DISCUSSION: The results suggest that Ocimum tenuiflorum and Ocimum gratissimum (NCs) oral rinse may possess stronger anti-inflammatory effects compared to commercial oral rinse, as evidenced by higher inhibition percentages in the BSA denaturation assay. Both formulations showed promising anti-inflammatory activity in the egg albumin denaturation and membrane stabilization assays, indicating their potential for mitigating inflammation. CONCLUSION: The Ocimum tenuiflorum and Ocimum gratissimum (NCs) oral rinse exhibits significant anti-inflammatory effects in vitro, potentially surpassing the efficacy of the commercial oral rinse. Further studies are needed to explore the clinical implications of these findings and to validate the anti-inflammatory properties of the Ocimum tenuiflorum and Ocimum gratissimum (NCs) oral rinse in vivo.

MXene-Derived TiO2/Starbon Nanocomposite as a Remarkable Electrode Material for Coin-Cell Symmetric Supercapacitor.

In this study, the synthesis of a MXene (Ti3C2Tx)-derived TiO2/starbon (M-TiO2/Starbon-800 °C) nanocomposite using a facile calcination method is explored. High-temperature exposure transforms layered Ti3C2Tx into rod-like TiO2 and starbon into amorphous carbon. The resulting M-TiO2/Starbon-800 °C nanocomposite exhibits a significantly larger surface area and pore volume compared to its individual components, leading to superior electrochemical performance. In a three-electrode configuration, the nanocomposite achieved a specific capacitance (Csp) of 1352 Fg⁻¹ at 1 Ag⁻¹, while retaining more than 99% of its Csp after 50 000 charge/discharge cycles. Furthermore, when incorporated into a two-electrode symmetric coin cell, it demonstrates a Csp of 115 Fg⁻¹ along with exceptional long cycle life. Moreover, the device shows an energy density (ED) of 51 Whkg-1 and a power density (PD) of 7912 Wkg-1 at 5 Ag-1. The enhanced charge storage is attributed to the formation of a porous structure with a high specific surface area resulting from the interaction between M-TiO2 nanorods and starbon, which facilitates efficient ion penetration.

Investigation of nano MgO loaded polyvinyl chloride polymer in protective clothing as a nonlead materials.

Recently, investigation of advanced shielding materials to be used as an alternative to lead apron has become important. In the current study, MgO loaded into PVC matrix as a non-lead modern shielding composite was modeled to evaluate its performance on radiation protective clothing (RPC). Parameters such as mass attenuation coefficient (MAC), mean free path (MFP), flux buildup factor (FBF), transmission factor (TF) and lead equivalent value (LEV) of samples were calculated using MCNPX Code. The simulation of the MCNP code was validated, by comparing the mass attenuation of concrete sample, with standard XCOM data and very good agreement was attended between XCOM and MC Code results. The MAC of nano and micro-sized samples were also compared with pure PVC and it was found that the nano MgO particle exhibits higher attenuation compared to micro MgO particle and pure PVC. The results show that, the MAC of samples increased to 63.13 % in 1.332 MeV with increasing filler concentration of nano MgO to 50 wt% relative to pure PVC. Investigation of LEV shows that nano MgO sample has more effective than Pb in 1.173 and 1.332 MeV gamma ray energy so that it provides 36.46 % and 11.13 % lighter RPC than Pb ones.

Turning sublimed sulfur and bFGF into a nanocomposite to accelerate wound healing via co-activate FGFR and Hippo signaling pathway.

Clinical treatment of diabetic refractory ulcers is impeded by chronic inflammation and cell dysfunction associated with wound healing. The significant clinical application of bFGF in wound healing is limited by its instability in vivo. Sulfur has been applied for the treatment of skin diseases in the clinic for antibiosis. We previously found that sulfur incorporation improves the ability of selenium nanoparticles to accelerate wound healing, yet the toxicity of selenium still poses a risk for its clinical application. To obtain materials with high pro-regeneration activity and low toxicity, we explored the mechanism by which selenium-sulfur nanoparticles aid in wound healing via RNA-Seq and designed a nanoparticle called Nano-S@bFGF, which was constructed from sulfur and bFGF. As expected, Nano-S@bFGF not only regenerated zebrafish tail fins and promoted skin wound healing but also promoted skin repair in diabetic mice with a profitable safety profile. Mechanistically, Nano-S@bFGF successfully coactivated the FGFR and Hippo signalling pathways to regulate wound healing. Briefly, the Nano-S@bFGF reported here provides an efficient and feasible method for the synthesis of bioactive nanosulfur and bFGF. In the long term, our results reinvigorated efforts to discover more peculiar unique biofunctions of sulfur and bFGF in a great variety of human diseases.

Biosustainable Multiscale Transparent Nanocomposite Films for Sensitive Pressure and Humidity Sensors.

Light weight, thinness, transparency, flexibility, and insulation are the key indicators for flexible electronic device substrates. The common flexible substrates are usually polymer materials, but their recycling is an overwhelming challenge. Meanwhile, paper substrates are limited in practical applications because of their poor mechanical and thermal stability. However, natural biomaterials have excellent mechanical properties and versatility thanks to their organic-inorganic multiscale structures, which inspired us to design an organic-inorganic nanocomposite film. For this purpose, a bio-inspired multiscale film was developed using cellulose nanofibers with abundant hydrophilic functional groups to assist in dispersing hydroxyapatite nanowires. The thickness of the biosustainable film is only 40 µm, and it incorporates distinctive mechanical properties (strength: 52.8 MPa; toughness: 0.88 MJ m-3) and excellent optical properties (transmittance: 80.0%; haze: 71.2%). Consequently, this film is optimal as a substrate employed for flexible sensors, which can transmit capacitance and resistance signals through wireless Bluetooth, showing an ultrasensitive response to pressure and humidity (for example, responding to finger pressing with 5000% signal change and exhaled water vapor with 4000% signal change). Therefore, the comprehensive performance of the biomimetic multiscale organic-inorganic composite film confers a prominent prospect in flexible electronics devices, food packaging, and plastic substitution.

Transcriptome changes in humans acutely exposed to nanoparticles during grinding of dental nanocomposites.

Aim: Today, there is a lack of research studies concerning human acute exposure to nanoparticles (NPs). Our investigation aimed to simulate real-world acute inhalation exposure to NPs released during work with dental nanocomposites in a dental office or technician laboratory. Methods: Blood samples from female volunteers were processed before and after inhalation exposure. Transcriptomic mRNA and miRNA expression changes were analyzed. Results: We detected large interindividual variability, 90 significantly deregulated mRNAs, and 4 miRNAs when samples of participants before and after dental nanocomposite grinding were compared. Conclusion: The results suggest that inhaled dental NPs may present an occupational hazard to human health, as indicated by the changes in the processes related to oxidative stress, synthesis of eicosanoids, and cell division.

What is this article about? We searched for a possible impact of acute inhalation exposure to nanoparticles (NPs) released during the grinding of dental nanocomposites used for teeth reconstruction. The exposure design utilized in our study simulated the acute exposure of the dental staff to the NPs. Our research fills the gaps in knowledge in the field of acute human inhalation exposure to dental nanocomposites.What were the results? Results indicate that the impact of exposure to NPs is dependent on the style of working as well as on the interindividual biological variability among study subjects. Changes in expression levels of genes associated with an increase of oxidative stress, synthesis of eicosanoids (signaling molecules related to e.g., immune responses), and cell division were detected.What do the results of the study mean? All the observed changes may contribute to the pathogenesis of neurodegenerative disorders, carcinogenesis, or problems during pregnancy. Occupational exposure to inhaled NPs, including those generated in dental practice can pose a significant health risk, and protective measures when working with these materials should be considered. More research is needed to compare our results with chronic (long-term) exposure to similar materials to show the hazards related to their inhalation.

Enhancing bacterial control and daylight-driven water remediation with chitosan-impregnated MoC nanosheets.

The functionalization of nanoparticles with 2D nanosheets is an effective approach to enhance their functional properties for pollutant removal. This research outlines the synthesis of a 2D-delaminated molybdenum carbide (MXene) chitosan nanocomposite (2D-d-Mo2CTx-Cs NC) with bacterial control and photocatalytic properties for dye adsorption. The nanocomposite includes Tx-surface terminating groups O, OH, and F. In this investigation, the composite was synthesized using the etching method and its formation was confirmed through UV spectra at 288 nm. It was characterized through FTIR, XRD, Particle size, Zetapotential, FESEM, HRTEM, EDAX, and XPS analyses. FTIR spectral analysis of NC suggests that amines are formed through a Schiff base reaction between glutaraldehyde and Cs, or through the interaction of terminal aldehydes and carbonyl groups. The XRD analysis confirmed the crystalline structure of the composite. FESEM images revealed irregularly structured nanosheets (NSs) material in the prepared 2D-d-Mo2CTx-Cs NC samples. HRTEM images revealed 2D-d-Mo2CTx NSs impregnated onto Cs with an average size of 50 nm, as confirmed by a particle size analyzer, with a zeta potential value of - 15 mV. Additionally, Mo, C, N, and O are the most significant elements present in the NC, as confirmed by EDAX and XPS analyses. Further, biocompatibility testing of 2D-d-Mo2CTx-Cs NC yielded positive results. Moreover, under sunlight, the composites effectively adsorbed methylene blue with a 90% adsorption capacity, as confirmed by kinetic studies. Furthermore, the synergistic effect of Cs and d-Mo2CTx NSs resulted in significant antibacterial (50-200 µl of 1 mg/ml) and antibiofilm activity (100 µl of 1 mg/ml) against pathogenic bacteria. Furthermore, this study represents the first report on the use of 2D-d-Mo2CTx-Cs NC for daylight-influenced photocatalytic applications with a bacteria-controlling effect.

Highly Sensitive Room-Temperature Detection of Ammonia in the Breath of Kidney Disease Patients Using Fe2Mo3O8/MoO2@MoS2 Nanocomposite Gas Sensor.

A novel Fe2Mo3O8/MoO2@MoS2 nanocomposite is synthesized for extremely sensitive detection of NH3 in the breath of kidney disease patients at room temperature. Compared to MoS2, α-Fe2O3/MoS2, and MoO2@MoS2, it shows the optimal gas-sensing performance by optimizing the formation of Fe2Mo3O8 at 900 °C. The annealed Fe2Mo3O8/MoO2@MoS2 nanocomposite (Fe2Mo3O8/MoO2@MoS2-900 °C) sensor demonstrates a remarkably high selectivity of NH3 with a response of 875% to 30 ppm NH3 and an ultralow detection limit of 3.7 ppb. This sensor demonstrates excellent linearity, repeatability, and long-term stability. Furthermore, it effectively differentiates between patients at varying stages of kidney disease through quantitative NH3 measurements. The sensing mechanism is elucidated through the analysis of alterations in X-ray photoelectron spectroscopy (XPS) signals, which is supported by density functional theory (DFT) calculations illustrating the NH3 adsorption and oxidation pathways and their effects on charge transfer, resulting in the conductivity change as the sensing signal. The excellent performance is mainly attributed to the heterojunction among MoS2, MoO2, and Fe2Mo3O8 and the exceptional adsorption and catalytic activity of Fe2Mo3O8/MoO2@MoS2-900 °C for NH3. This research presents a promising new material optimized for detecting NH3 in exhaled breath and a new strategy for the early diagnosis and management of kidney disease.

The ameliorating effects of cinnamic acid-based nanocomposite against salt stress in peppermint.

Nanoparticles (NPs) are important in regulating plant tolerance to salt stress. Peppermint is one of the most widely used aromatic plants, with a high sensitivity to salt stress. The present study investigated physiological and biochemical factors to understand better the behavior of cinnamic acid (CA) and cinnamic acid nanocomposite in salinity control in peppermint plants. The first factor was salt stress with different salt concentrations, including 0, 50, 100, and 150 mg/L, the second factor was 50 µM CA, and the third factor was 50 µM CA nanocomposite based on carboxymethyl cellulose (CMC-CA NC). Results showed that stress markers increased with increasing salinity levels. On the contrary, plants treated with salinity showed a decrease in physiological and photosynthetic parameters, while the application of CA and CMC CA NC increased these critical parameters. Under salinity, compared to the control, malondialdehyde and hydrogen peroxide contents decreased by 11.3% and 70.4%, respectively. Furthermore, CA and CMC-CA NC enhanced peppermint tolerance to salinity by increasing compatible solute content such as proline, free amino acids, protein content, and soluble carbohydrates, increasing antioxidant enzymes, and decreasing stress markers in plant tissues. Compared to the control, chlorophyll fluorescence and proline content increased by 1.1% and 172.1%, respectively. Salinity stress negatively affected all physiological and biochemical parameters, but CA and CMC-CA NC treatments improved them. We concluded that the nanocomposite, a biostimulant, significantly enhances mint tolerance under salinity conditions.

Experimental exploration and DFT analysis of the kinetics and mechanism of malachite green photodegradation catalyzed by polyaniline-copper oxide nanocomposite.

CONTEXT AND RESULTS: A nanocomposite photocatalyst consisting of polyaniline (PANI) and copper oxide (CuO) was successfully synthesized through an in-situ polymerization approach using aniline as the precursor. The synthesized nanocomposite was characterized using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), UV-visible spectroscopy (UV-Vis), determination of the point of zero charge (pHPZC), and scanning electron microscopy (SEM). The photocatalytic efficiency of the PANI-CuO nanocomposite was evaluated in the context of photodegrading Malachite Green (MG) dye under visible light. Malachite Green, a synthetic dye commonly used in the textile and aquaculture industries, is a significant contaminant due to its toxic, mutagenic, and carcinogenic properties, making its removal from water resources crucial for environmental and human health. Distilled water artificially contaminated with MG dye was used as the medium for testing. The parameters influencing the photodegradation efficiency were comprehensively investigated. These parameters included catalyst dosage, reaction time, initial dye concentration, and pH. The results of this study indicate that the degradation efficiency of MG dye displayed an upward trend with time, catalyst dosage, and pH while exhibiting a converse relationship with the initial dye concentration. A degradation rate of 97% was achieved with an initial concentration of 20 mg L-1, employing a catalyst dose of 1.6 g L-1 at pH 6 for a reaction time of 180 min. Furthermore, the reusability of the catalyst was assessed, revealing consistent performance over five consecutive cycles. COMPUTATIONAL AND THEORETICAL TECHNIQUES: Density functional theory (DFT) was employed to optimize the structures of PANI, PANI-CuO, and their respective complexes formed through dye interaction, employing Gaussian software. These calculations employed the B3LYP/6-311G + + (d,p) basis set in an aqueous environment with water serving as the solvent. The kinetics of Malachite Green degradation were analyzed using both first and second-order kinetic models.

Employing a magnetic chitosan/molybdenum disulfide nanocomposite for efficiently removing polycyclic aromatic hydrocarbons from milk samples.

This study aimed to develop a highly efficient nanocomposite composed of magnetic chitosan/molybdenum disulfide (CS/MoS2/Fe3O4) for the removal of three polycyclic aromatic hydrocarbons (PAHs)-pyrene, anthracene, and phenanthrene. Novelty was introduced through the innovative synthesis procedure and the utilization of magnetic properties for enhanced adsorption capabilities. Additionally, the greenness of chitosan as a sorbent component was emphasized, highlighting its biodegradability and low environmental impact compared to traditional sorbents. Factors influencing PAH adsorption, such as nanocomposite dosage, initial PAH concentration, pH, and contact time, were systematically investigated and optimized. The results revealed that optimal removal efficiencies were attained at an initial PAH concentration of 150 mg/L, a sorbent dose of 0.045 g, pH 6.0, and a contact time of 150 min. The pseudo-second-order kinetic model exhibited superior fitting to the experimental data, indicating an equilibrium time of approximately 150 min. Moreover, the equilibrium adsorption process followed the Freundlich isotherm model, with kf and n values exceeding 7.91 mg/g and 1.20, respectively. Remarkably, the maximum absorption capacities for phenanthrene, anthracene, and pyrene on the sorbent were determined as 217 mg/g, 204 mg/g, and 222 mg/g, respectively. These findings underscore the significant potential of the CS/MoS2/Fe3O4 nanocomposite for efficiently removing PAHs from milk and other dairy products, thereby contributing to improved food safety and public health.

Novel L-(CaP-ZnP)/SA Nanocomposite Hydrogel with Dual Anti-Inflammatory and Mineralization Effects for Efficient Vital Pulp Therapy.

Background: Vital pulp therapy (VPT) is considered a conservative treatment for preserving pulp viability in caries and trauma-induced pulpitis. However, Mineral trioxide aggregate (MTA) as the most frequently used repair material, exhibits limited efficacy under inflammatory conditions. This study introduces an innovative nanocomposite hydrogel, tailored to simultaneously target anti-inflammation and dentin mineralization, aiming to efficiently preserve vital pulp tissue. Methods: The L-(CaP-ZnP)/SA nanocomposite hydrogel was designed by combining L-Arginine modified calcium phosphate/zinc phosphate nanoparticles (L-(CaP-ZnP) NPs) with sodium alginate (SA), and was characterized with TEM, SEM, FTIR, EDX, ICP-AES, and Zeta potential. In vitro, we evaluated the cytotoxicity and anti-inflammatory properties. Human dental pulp stem cells (hDPSCs) were cultured with lipopolysaccharide (LPS) to induce an inflammatory response, and the cell odontogenic differentiation was measured and possible signaling pathways were explored by alkaline phosphatase (ALP)/alizarin red S (ARS) staining, qRT-PCR, immunofluorescence staining, and Western blotting, respectively. In vivo, a pulpitis model was utilized to explore the potential of the L-(CaP-ZnP)/SA nanocomposite hydrogel in controlling pulp inflammation and enhancing dentin mineralization by Hematoxylin and eosin (HE) staining and immunohistochemistry staining. Results: In vitro experiments revealed that the nanocomposite hydrogel was synthesized successfully and presented desirable biocompatibility. Under inflammatory conditions, compared to MTA, the L-(CaP-ZnP)/SA nanocomposite hydrogel demonstrated superior anti-inflammatory and pro-odontogenesis effects. Furthermore, the nanocomposite hydrogel significantly augmented p38 phosphorylation, implicating the involvement of the p38 signaling pathway in pulp repair. Significantly, in a rat pulpitis model, the L-(CaP-ZnP)/SA nanocomposite hydrogel downregulated inflammatory markers while upregulating mineralization-related markers, thereby stimulating the formation of robust reparative dentin. Conclusion: The L-(CaP-ZnP)/SA nanocomposite hydrogel with good biocompatibility efficiently promoted inflammation resolution and enhanced dentin mineralization by activating p38 signal pathway, as a pulp-capping material, offering a promising and advanced solution for treatment of pulpitis.

Comparative study of the photocatalytic activity of g-C3N4/MN4 (M = Mn, Fe, Co) for water splitting reaction: A theoretical study.

In this study, nanocomposites of g-C3N4/MN4 (where M is Mn, Fe and Co) have been designed using advanced density functional theory (DFT) calculations. A comprehensive analysis was conducted on the geometry, electronic, optical properties, work function, charge transfer interaction and adhesion energy of the g-C3N4/MN4 heterostructures and concluded that g-C3N4/FeN4 and g-C3N4/CoN4 heterojunctions exhibit higher photocatalytic performance than individual units. The better photocatalytic activity can be attributed mainly by two facts; (i) the visible light absorption of both g-C3N4/FeN4 and g-C3N4/CoN4 interfaces are higher compared to its isolated analogs and (ii) a significant enhancement of band gap energy in g-C3N4/FeN4 and g-C3N4/CoN4 heterostructures limited the electron-hole recombination significantly. The potential of the g-C3N4/MN4 heterojunctions as a photocatalyst for the water splitting reaction was assessed by examining its band alignment for water splitting reaction. Importantly, while the electronic and magnetic properties of MN4 systems were studied, this is the first example of inclusion of MN4 on graphene-based material (g-C3N4) for studying the photocatalytic activity. The state of the art DFT calculations emphasis that g-C3N4/FeN4 and g-C3N4/CoN4 heterojunctions are half metallic photocatalysts, which is limited till date.

Chitosan/MgO NPs/CQDs bionanocomposite coating: Fabrication, characterization and determination of antimicrobial efficacy.

The development of new polymer nanocomposites or antibacterial coatings is crucial in combating drug-resistant infections, particularly bacterial infections. In this study, a new chitosan polymer based nanocomposite reinforced with magnesium oxide nanopowders and carbon quantum dots was fabricated by sol-gel technique and coated on 316 L stainless steel. In order to gaining the optimal amount of components to achieve the maximum antibacterial properties, the effect of concentration of nanocomposite components on its antibacterial properties was investigated. Crystal structure, microstructure, elemental dispersion, size distribution, chemical composition and morphology of nanocomposite and coating were characterized with various analyses. The obtained results exhibited that the carbon quantum dot and magnesium oxide nanopowders were distributed uniformly and without agglomeration in the chitosan matrix and created a uniform coating. The antibacterial properties of the synthesized samples against Staphylococcus aureus bacteria (gram positive) were evaluated using disk diffusion and minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) antibacterial tests. The inhibition growth zone formed around the antibiotic and nanocomposite 25 mg/ml under dark and light was about 32 and 14, 11 mm, respectively. Also, MIC and MBC values for final nanocomposite were 62.5 and 125 µg/ml, respectively.

A curcumin-loaded biopolymeric nanocomposite alleviates dextran sulfate sodium induced ulcerative colitis via suppression of inflammation and oxidative stress.

Functional drugs nano delivery systems manufactured from natural active products are promising for the field of biomedicines. In this study, an anti-ulcerative colitis (UC) curcumin loaded biopolymeric nanocomposite (CZNH) was fabricated and investigated. CZNH nanocomposite was obtained using the anti-solvent precipitation method, wherein curcumin-loaded zein colloidal particles served as the core, while sodium casein (NaCas) and hyaluronic acid (HA) formed the outermost layer of CZNH nanocomposite. Fourier transform infrared (FT-IR) spectrum and transmission electron microscopy (TEM) findings demonstrated that CZNH nanocomposite was a double-layer spherical micelle (250 nm) resulting from the hydrogen bond interactions and electrostatic adsorptions between zein, NaCas, and HA. Furthermore, CZNH nanocomposite exhibited prominent resuspension and storage stability in aqueous solution, which can be stored at 4 °C for approximately 30 days. In vivo anti-UC studies showed that CZNH nanocomposite could effectively alleviate UC symptoms via mediating inflammatory factors [tumor necrosis factor-α (TNF-α), interleukin-1ß (IL-1ß), and IL-6], myeloperoxidase (MPO), and oxidative stress factor [malondialdehyde (MDA), superoxide dismutase (SOD), and glutathione peroxidase (GSH-Px)]. This study suggested that the CZNH nanocomposite showed great promise as an efficient curcumin nanocarrier for UC therapy.

A review of plastic waste nanocomposites: assessment of features and applications.

Hundreds of millions of metric tons of plastic waste are generated globally every year. Processing waste into secondary raw material is preferred over energy production and landfilling. However, mechanical recycling generally deteriorates the properties of plastic waste limiting its range of potential applications. Nanocomposite fabrication is a solution to recycle plastic waste into value-added applications due to improved properties generated by nanomaterial reinforcement, however received little study. The aim of this review is to present the current status, identify research gaps and provide topics for further research of polymer nanocomposites prepared from plastic waste in respect to utilized materials, processing methods, enhanced properties, sustainability, economics, nanomaterial safety, and applications. It is found that morphological, mechanical, thermal, flame retardancy, physical, barrier, electrical and shielding properties of plastic waste can be enhanced with low loadings of different nanomaterials making them promising materials for various applications including electronic, shielding, thermal, packaging, filtration, and water treatment. Utilization of plastic waste instead of virgin polymers can be beneficial in respect to economics and sustainability, but the energy intensive and expensive production of the most nanomaterials, and the plastic waste pretreatment methods can negate these benefits. To enhance sustainability, further research should be conducted on utilization of energy friendly nanomaterials in plastic waste nanocomposites. Further research is needed also on polymer nanocomposite safety because of the unknow composition of the plastic waste and the potential for nanomaterial release during nanocomposite's life cycle. All in all, further research and national regulations and guidance are needed on virgin polymer and plastic waste nanocomposites.

Ionic liquid based surfactant-free microemulsion as a new protocol for preparation of visible light active poly(methyl methacrylate)/TiO2 nanocomposite.

The practical application of sensitized TiO2 nanocomposites is very satisfying due to their high photon utilization in visible light, simple recovery without affecting the photocatalytic performance, high energy efficiency, low potential environmental risk, and low operational costs. The objective of this study is developing the ionic liquid (IL)-based surfactant-free microemulsion, as a soft template, for preparation of a novel type of sensitized poly(methyl methacrylate)/TiO2 nanocomposite (PMMA/TiO2/IL). For this purpose, a series of visible light-responsive PMMA/TiO2/IL transparent nanocomposites were prepared in microemulsion composed of methyl methacrylate monomer, 1-buthyl-3-methylimidazolium tetrafluoroborate ([bmim][BF4]), and 1-buthanol as amphi-solvent. Techniques such as diffuse reflectance spectroscopy (DRS)), attenuated total reflectance-fourier transform infrared (ATR-FTIR) spectroscopy, atomic force microscopy (AFM), field emission scanning electron microscopy (FE-SEM), and energy dispersive X-ray analysis (EDX) were used to characterize prepared nanocomposites. Photocatalytic degradation of methyl orange dye under visible light illumination, as an application in wastewater treatment, with the investigation of the influence of TiO2 content in the nanocomposite, pH, and nanocomposite reusability on photodegradation efficiency was studied and maximum value of 93.9% obtained at optimum conditions. The FESEM analysis indicated that the utilization of a relatively low amount of ionic liquid and also in absence of the surfactant ensures the monodispersity of the visible light sensitized TiO2 nanoparticles in the polymer matrix.

Enhanced anticancer activity of silver doped zinc oxide magnetic nanocarrier loaded with sorafenib for hepatocellular carcinoma treatment.

Drug delivery is the process or method of delivering a pharmacological product to have therapeutic effects on humans or animals. The use of nanoparticles to deliver medications to cells is driving the present surge in interest in improving human health. Green nanodrug delivery methods are based on chemical processes that are acceptable for the environment or that use natural biomaterials such as plant extracts and microorganisms. In this study, zinc oxide-superparamagnetic iron oxide-silver nanocomposite was synthesized via green synthesis method using Fusarium oxysporum fungi mycelia then loaded with sorafenib drug. The synthesized nanocomposites were characterized by UV-visibile spectroscopy, FTIR, TEM and SEM techniques. Sorafenib is a cancer treatment and is also known by its brand name, Nexavar. Sorafenib is the only systemic medication available in the world to treat hepatocellular carcinoma. Sorafenib, like many other chemotherapeutics, has side effects that restrict its effectiveness, including toxicity, nausea, mucositis, hypertension, alopecia, and hand-foot skin reaction. In our study, 40 male albino rats were given a single dose of diethyl nitrosamine (DEN) 60 mg/kg b.wt., followed by carbon tetrachloride 2 ml/kg b.wt. twice a week for one month. The aim of our study is using the zinc oxide-superparamagnetic iron oxide-silver nanocomposite that was synthesized by Fusarium oxysporum fungi mycelia as nanocarrier for enhancement the sorafenib anticancer effect.

Designing Energy-Efficient Buildings in Urban Centers through Machine Learning and Enhanced Clean Water Management.

Rainwater Harvesting (RWH) is increasingly recognized as a vital sustainable practice in urban environments, aimed at enhancing water conservation and reducing energy consumption. This study introduces an innovative integration of nano-composite materials as Silver Nanoparticles (AgNPs) into RWH systems to elevate water treatment efficiency and assess the resulting environmental and energy-saving benefits. Utilizing a regression analysis approach with Support Vector Machines (SVM) and K-Nearest Neighbors (KNN), this study will reach the study objective. In this study, the inputs are building attributes, environmental parameters, sociodemographic factors, and the algorithms SVM and KNN. At the same time, the outputs are predicted energy consumption, visual comfort outcomes, ROC-AUC values, and Kappa Indices. The integration of AgNPs into RWH systems demonstrated substantial environmental and operational benefits, achieving a 57% reduction in microbial content and 20% reductions in both chemical usage and energy consumption. These improvements highlight the potential of AgNPs to enhance water safety and reduce the environmental impact of traditional water treatments, making them a viable alternative for sustainable water management. Additionally, the use of a hybrid SVM-KNN model effectively predicted building energy usage and visual comfort, with high accuracy and precision, underscoring its utility in optimizing urban building environments for sustainability and comfort.