Orthodontic maxillary molar movement-induced zygomatic pillar remodeling and its consequences on occlusal characteristics and stress distribution.

OBJECTIVE: We aimed to evaluate changes in the zygomatic pillar during orthodontic treatment involving premolar extraction, analyze the effects of maxillary first molar movement on zygomatic pillar remodeling, and examine occlusal characteristics and stress distribution after remodeling. METHODS: Twenty-five patients who underwent premolar extraction were included in the study. The zygomatic pillar measurement range was defined, and cross-sectional areas, surface landmark coordinates, alveolar and cortical bone thicknesses, and density changes were assessed using Mimics software based on the cone-beam computed tomography scans taken before (T0) and after the treatment (T1). Multiple linear regression analysis was performed to determine the correlation between changes in the zygomatic pillar and maxillary first molar three-dimensional (3D) movement and rotation. Additionally, the correlation between pillar remodeling and occlusal characteristics was analyzed by Teetester. Pre- and post-reconstruction 3D finite element models were constructed and loaded with an average occlusal force of two periods. RESULTS: The morphological and structural remodeling of the zygomatic pillar after orthodontic treatment involving premolar extraction showed a decreased cross-sectional area of the lower segment of the zygomatic pillar. The zygomatic process point moved inward and backward, whereas the zygomatico-maxillary suture point moved backward. The thicknesses of the zygomatic pillar alveolar and cortical bones were thinner, and reduced alveolar bone density was observed. Simultaneously, the movement and angle change of the maxillary first molar could predict zygomatic pillar reconstruction to a certain extent. With decreasing the total occlusal force and the occlusal force of the first molar, occlusal force distribution was more uniform. With zygomatic pillar remodeling, occlusal stress distribution in the zygomatic alveolar ridge decreased, and occlusal stress was concentrated at the junction of the vertical and horizontal parts of the zygomatic bone and the posterior part of the zygomatic arch. CONCLUSIONS: Orthodontic treatment involving premolar extraction led to zygomatic pillar remodeling, making it more fragile than before and reducing the occlusal force of the maxillary first molar and the entire dentition with stress concentrated in weak areas. CLINICAL RELEVANCE: No other study has focused on the effects of orthodontics on pillar structures. The present study indicates that the mesial movement of the maxillary first molar weakened the zygomatic pillar and reduced occlusal function, thereby providing insights for inserting anchorage screws and facial esthetics.

Physiological occlusal force attenuates replacement root resorption of replanted teeth: an experimental animal study.

BACKGROUND: Tooth avulsion represents the most severe form of dental trauma, necessitating tooth replantation as the primary treatment. However, the risk of replacement root resorption (RRR) poses a significant threat to tooth retention following replantation. This study preliminarily aimed to investigate the effect of physiological occlusal force on RRR after the replantation of avulsed teeth and to explore the potential underlying mechanisms. METHODS: Thirty-six 4-week-old male Sprague-Dawley rats underwent extraction and immediate replantation of their left maxillary molars. The rats were randomly divided into two major groups: the occluded (n = 18) group, where the opposite mandibular teeth were preserved; non-occluded (n = 18) group, where the opposite mandibular teeth were extracted. Within each major group, there were three subgroups corresponding to 7 days, 14 days, and 2 months, resulting in a total of six subgroups, (n = 6 per subgroup). The right maxillary first molars served as the normal control. Various periodontal characteristics were assessed using haematoxylin-eosin (H&E), tartrate-resistant acid phosphatase (TRAP) staining, and micro-computed tomography (micro-CT). RESULTS: Histological staining revealed that under occlusal force, the early stage (day 7) after tooth replantation mainly manifested as root surface resorption, especially in the non-occluded group, which gradually diminished over time. Cementum and periodontal ligament (PDL) repair was observed on day 14. Micro-CT analysis indicated a significant decrease in PDL width in the non-occluded group two months after replantation, consistent with the histological findings, signifying severe RRR in the non-occluded group. CONCLUSIONS: This study provides preliminary evidence that physiological occlusal force may attenuate osteoclastogenesis during the early stage of tooth replantation, thereby reducing the occurrence of RRR and promoting periodontal healing.

Occlusal changes on implant-supported single crowns with one year follow-up after loading: A systematic review and meta-analysis.

OBJECTIVE: This systematic review evaluated the occlusal changes after loading with implant-supported single crowns. SOURCES: An electronic literature search was conducted in PubMed, Embase and Cochrane library for randomized (RCTs) or non-randomized controlled clinical trials (CCTs), with a minimum of 10 patients. STUDY SELECTION: Studies reporting the occlusal force changes on implant-supported single crowns - with natural teeth as antagonist - measured at baseline and after loading periods were included. 4 CCTs including 133 ISCs in posterior sites were included for meta-analysis. All analyzed ISCs had no contact at a light bite and a light contact at a heavy bite in MIP at loading (baseline). DATA: The relative occlusal forces (ROFs) of each implant-supported single crown (ISC) or control tooth (CT) were extracted. ROFs were defined as percentage of the total occlusal force of the entire dentition at maximum intercuspal position (MIP). A meta-analysis was conducted to compare the ROF changes at different follow-up periods and the weighted mean differences in ROF between ISCs and CTs were pooled and analyzed. The amount of change in ROF was significantly lower in 6 to 12 months after loading comparing the follow-up period between baseline and 6 month (p < 0.05). At baseline and 3-month follow-up, CTs presented significant higher ROF than ISCs (p < 0.05), while no significant difference was found after half year following. CONCLUSIONS: This study showed that the ROF changes significantly over time after loading of ISCs. It might prove that the occlusal concept defined at the time of prosthetic delivery changes or adapts naturally over time. CLINICAL SIGNIFICANCE: The function of specific implant occlusal concept (no contact at a light bite and a light contact at a heavy bite in MIP) is limited over time and careful monitoring and occlusal adjustments should be recommendable during the first-year follow-up.

Lower limb balance, ankle dorsiflexion, orofacial tissue pressure, and occlusal force of rugby players.

This cross-sectional study examined the lower limb balance, ankle dorsiflexion, orofacial tissue pressure, and occlusal strength of rugby players. Twenty-six participants were divided into groups: rugby players (n â€‹= â€‹13) and healthy sedentary adults (n â€‹= â€‹13). Participants underwent an analysis of lower limb balance using a composite score (Y-Balance Test). Ankle dorsiflexion was measured using the Lunge Test. The Iowa Oral Performance Instrument was employed to measure orofacial tissue pressure. Bite force was measured with a dynamometer, and T-Scan assessed occlusal contact distribution. Data were analyzed using the t-test (p â€‹< â€‹0.05) and ANCOVA with age and weight as covariates, where it is possible to verify that these factors did not influence the results obtained. Significant differences were observed in the balance of the right (p â€‹= â€‹0.07) and left (p â€‹= â€‹0.02) lower limbs, where rugby players had lower composite scores. There were significant differences in the right (p â€‹= â€‹0.005) and left (p â€‹= â€‹0.004) lunges, with rugby players showing lower values, as well as lower tongue pressure (p â€‹= â€‹0.01) and higher lip pressure (p â€‹= â€‹0.03), with significant differences to sedentary participants. There was no significant difference in molar bite force and distribution occlusal contacts between groups. Rugby seems to reduce lower limb displacement, cause ankle hypomobility, lead to changes in orofacial tissues, particularly the tongue and lips. This study is significant for identifying significant differences between rugby players and sedentary individuals, providing new insights into the impact of rugby on health and performance, which can benefit sports training and injury prevention.

Evaluation of occlusal force in Class II subdivision malocclusion.

BACKGROUND: Class II subdivision is a malocclusion characterized by dental and functional asymmetry that is difficult to manage. Impaired muscle function can result in asymmetrical growth, leading to occlusal instability. OBJECTIVE(S): The study aimed to assess occlusal force in patients with Class II subdivision malocclusion using Innobyte. Additionally, the discrepancies of force generated at the position of maximum intercuspidation between the left and right sides of the arches were evaluated. METHODS: The occlusal force of 66 patients with Class II subdivision malocclusion (group S) was measured and compared with that of 66 patients with Class I (group I) and 66 patients with Class II malocclusion (group II). The S group patients had a Class I molar on the right side and a Class II molar on the left side. ANOVA test, followed by the Games-Howell post hoc test, was performed to compare the mean of the total force among the groups. To assess the difference in force between the right and left arches, one-way ANOVA test followed by Tukey's post hoc comparison was performed. Finally, a boxplot was created to show the trend of occlusal force recorded in the three groups of patients. RESULTS: The occlusal force differed significantly among the groups (p < .001). Post hoc Games-Howell analysis showed significant differences as follows: the total force in group S was 165.24 N greater than in group II and in group I was 218.06 N greater than in group II. The difference (right-left) in total force between the groups was statistically significant (p < .001). Tukey's post hoc test showed following significant correlation: in group S was 53.51 N greater than in group II and 63.12 N greater than in group I. CONCLUSIONS: Among the analysed groups, patients with Class II malocclusion exhibited the lowest value of occlusal force. In patients with Class II subdivision malocclusion, force asymmetry, characterised by a higher value on the Class I side and a lower value on the Class II side was observed.

Factors Related to Masticatory Rhythm in Patients with Oral Tumors.

Background: Older adults who have undergone surgery for oral tumors are at increased risk of impaired masticatory rhythm. This study investigated the correlations between masticatory rhythm, objective masticatory performance, and subjective masticatory performance as well as factors related to masticatory rhythm. Methods: The participants were 44 adults (24 men, 20 women; age range 42~90 years old) who had undergone maxillectomy, mandibulectomy, or glossectomy and were rehabilitated with a maxillofacial prosthesis. The number of functional contact teeth pairs was confirmed by intraoral examination. Chewing rate, cycle duration, coefficient of variation (CV) for cycle duration (reflecting the stability of masticatory rhythm), and mixing ability were measured simultaneously using a mastication movement rhythm tracking device during gum chewing. Maximum occlusal force was measured using the dental prescale system. Patients' perception of chewing ability was rated using a questionnaire. Results: The Spearman's rank correlation test revealed that mixing ability, patient-rated masticatory scores, cycle duration, CV for cycle duration, and maximum occlusal force showed significant correlations with chewing rate. Multiple linear regression analysis identified mixing ability and the CV for cycle duration as significant predictors of masticatory rhythm. Conclusions: Factors associated with a faster chewing rate were higher mixing ability and masticatory scores, greater maximum occlusal force, shorter cycle duration, and smaller CV for cycle duration. Stable masticatory rhythm and mixing ability are significant predictors of chewing rate. Poor masticatory performance and unstable masticatory rhythm can result in slower chewing and thus a higher risk of inadequate dietary intake.

Decreased oral function in Japanese inpatients with schizophrenia.

AIM: Oral function in patients with schizophrenia has not been well-characterized. To address this, we performed a cross-sectional study of oral function in Japanese inpatients with schizophrenia. METHODS: We measured oral function, including occlusal force, tongue-lip motor function, tongue pressure, and masticatory function in 130 Japanese inpatients with schizophrenia. We then compared the frequency of clinical signs of oral hypofunction among 63 non-elderly and 67 elderly inpatients with schizophrenia, as well as data from 98 elderly control participants from a previous Japanese study. RESULTS: The frequency of reduced occlusal force was significantly higher in the elderly inpatients (76.2%) than in the non-elderly inpatients (43.9%) and elderly controls (43.9%). The frequency of decreased tongue-lip motor function in non-elderly inpatients (96.8%) and elderly inpatients (97.0%) was significantly higher than that in elderly controls (56.1%). The frequency of decreased tongue pressure in non-elderly inpatients (66.1%) and elderly inpatients (80.7%) was significantly higher than that in elderly controls (43.9%). Finally, the frequency of decreased masticatory function was highest in elderly inpatients (76.5%), followed by non-elderly inpatients (54.8%) and elderly controls (15.3%). CONCLUSION: Oral function was decreased in both non-elderly and elderly Japanese inpatients with schizophrenia compared with elderly controls.

A Preliminary Report of Maximum Voluntary Bite Force of Young Indian Population.

Introduction: The measurement of bite force is increasingly gaining importance in dentistry. This preliminary report evaluates the maximum voluntary bite force (MVBF) of young healthy individuals with normal occlusion and correlates the effect of age and gender with the maximum bite force (MBF). Materials and Methods: 405 participants in the age group of 18 to 40 years were selected from the outpatient department meeting inclusion and exclusion criteria. MVBF was measured with the help of a digital device called "Byte" at incisors, right first molar, and left first molar region. Results: There was a strong correlation between age with bite force. Bite force increased with age. Males had more bite force than females. The posterior region had higher bite force than the anterior region. Conclusion: Measurement of bite force is very important for every patient undergoing restorative treatment. The "Byte" device was found to be very efficient.

Use of T-Scan III in analyzing occlusal changes in molar fixed denture placement.

BACKGROUND: This study aims to analyze the longitudinal variation of occlusal force distribution prior to and after fixed restoration for molar full-crowns with T-SCAN III which provide reference for occlusal adjustment and long-term maintenance. METHODS: We enrolled a total of 20 patients who received conventional restorative treatment for molars. The occlusion examination was conducted in 3 stages (before placement, immediately after placement, and 3 months after placement) using T-SCAN III (Tekscan South Boston, MA, USA, 10.0) to examine and measure the occlusal contact areas of the full dentition. RESULTS: The results indicated that the occlusal force distribution in the molar region of the patients changed before and after the fixed restoration, but the percentages of occlusal force in the dental arch of the molar did not differ significantly before and after the restoration (P > 0.05). Three months after the fixed restoration, the percentage of occlusal force in the restored dental arches of lateral teeth increased significantly (P < 0.05). CONCLUSION: The results of this study indicated that the occlusal forces of the patients changed with tooth movement and adaptation, which is mainly reflected in the increasing occlusal force. Quantitative occlusal force analysis using T-SCAN III occlusal analyzer can provide more objective and accurate data to effectively guide clinical occlusion adjustments.

An observational study of oral functions in patients aged from 20 to 49 years.

PURPOSE: The purpose of this study was to analyze oral functions (MOF: maximum occlusal force; MTP: maximum tongue pressure; and MF: masticatory function) in Eichner A subjects aged from 20 to 49 years. METHODS: The data of three oral functions in Eichner A patients aged from 20 to 49 years were extracted. The mean values, subjects with lower values than the thresholds, and the differences among ages, and between sexes were investigated retrospectively. RESULTS: Although the mean values of these oral functions in 183 subjects were higher than the thresholds, the numbers of the subjects with lower values than the thresholds were 30 in MTP, 19 in MOF, and only three in MF. No significant effects of ages on all oral functions were identified and all functions in males were significantly higher than those in females. The subjects whose two functions were lower than the thresholds were nine females, eight of whom were associated with malalignment. CONCLUSION: Although the mean values of oral functions were higher than the thresholds, some patients showed lower values, especially in MOF and MTP, even though they were unaware of any inconvenience. Patients with malalignment might be associated with declined oral functions.

Changes in occlusion after orthognathic surgery: a systematic review and meta-analysis.

PURPOSE: This study aims to systematically review and identify the changes of occlusion in patients after orthognathic surgery. METHODS: The protocol was developed according to the Preferred Reporting Items for Systematic Reviews and Meta-Analysis Protocols (PRISMA-P) and was registered to the International Prospective Register of Systematic Reviews (PROSPERO) under the registration number CRD42021253129. Studies included were Original articles only, Additionally, studies were included if the outcome of occlusal force was measured pre- and postoperatively and if occlusal forces resulted from a long follow-up of a minimum of 1 year following orthognathic surgery using adequate measurement tools. Non-English articles, case reports, case series, and non-original articles, including systematic reviews and literature reviews, were excluded. RESULTS: The search strategy yielded a total of 978 articles. Of the 978 articles, 285 were duplicates. After reading the titles and abstracts, 649 articles were excluded, and full-text articles of the remaining 47 studies were reviewed independently by two authors for eligibility wherein 33 articles were excluded, because they did not meet the inclusion criteria. Finally, a total of 14 studies were processed for critical review. CONCLUSION: The occlusal force increased after orthognathic surgery, although not to the level of the control group; however, the maximal bite force remained unchanged. Immediately after orthognathic surgery, chewing and swallowing forces increased. Significant reductions in the postoperative occlusal contact pressure areas was also observed.

Validation of a New Measuring Instrument for the Assessment of Bite Force.

BACKGROUND: this study aims to validate two occlusal-force-measuring devices by comparing them to a universal testing machine and assessing their reliability across various dental and prosthetic groups. The research comprised two parts: part 1 assessed the measurement accuracy of the Occlusal Force Meter GM 10® (OFM) (Morita, Nagano Keiki, Higashimagome, Ohta-ku, Tokyo, Japan) and a prototype (PRO) by comparing them to a calibrated universal testing machine (ZWICK). Part 2 involved analyzing the devices' reliability based on clinical bite force measurements from study participants. RESULTS: both devices become more accurate and reliable compared to the ZWICK over time of usage. Additionally, higher deviation from the ZWICK can be observed for higher values of forces applied and vice versa for both devices. The PRO's intraoral alignment influences its mean values compared to the OFM in different dental and prosthetic groups. CONCLUSION: both devices had limitations and required quadratic function calibration, making them suitable only for progression measurements. The study concludes that both the OFM and PRO devices can measure occlusal forces with improved accuracy over time. Intraoral alignment should be considered. Their easy-to-use clinical application would allow a more widespread use of masticatory function diagnosis, which could indicate the need for treatment and improve treatment planning.

Guillain-Barré Syndrome Presenting With Masticatory Disturbance and Reduction in Bite Force.

Guillain-Barré syndrome is a rare, rapidly progressive, and potentially fatal immune-mediated neuropathy. A 17-year-old male patient with a fever of 38°C developed masticatory impairment a few days later. Although the fever resolved after one week, the restricted mouth opening and decreased bite force persisted. Thirty-five days after disease onset, the patient was referred to our clinic and reported severe masticatory dysfunction due to a significant reduction in maximum bite force (left: 0 N, right: 12.7 N). His maximal mouth opening was 24 mm without jaw deviation. An electrophysiological study revealed Guillain-Barré syndrome (acute motor axonal neuropathy). The patient was closely monitored as he underwent rehabilitation comprising mouth opening and mastication training. The patient's bite force and masticatory impairment due to the weakness of the muscles of mastication gradually improved. At one year and five months after disease onset, the masticatory impairment had fully resolved. His maximum bite force two years after disease onset was 158.3 N on the left side and 172.2 N on the right side.

Relationship between the number of teeth, occlusal force, occlusal contact area, and dietary hardness in older Japanese adults: The SONIC study.

PURPOSE: Individuals with impaired masticatory function tend to prefer soft foods, which results in decreased masticatory muscle activity. This study examined the association between the oral condition (number of teeth, occlusal force, and occlusal contact area) and dietary hardness using a daily dietary questionnaire. METHODS: This cross-sectional study evaluated 1841 participants aged 69-71 and 79-81 years. Registered dentists examined the number of teeth, occlusal force, and occlusal contact area. Dietary hardness was defined as the estimated masticatory muscle activity required for a habitual diet. Habitual diet during the preceding month was assessed using a brief self-administered diet history questionnaire. Confounding factors, such as age, sex, socioeconomic status, smoking habits, history of chronic diseases (hypertension, hyperlipidemia, and diabetes), and cognitive function were also evaluated. Multivariate linear regression analyses were performed to assess the association between dietary hardness and each oral condition. RESULTS: Occlusal force (standardized regression coefficients [ß]=0.08, P < 0.01) and occlusal contact area (ß=0.06, P < 0.01) were significantly associated with dietary hardness after adjusting for the confounding factors. Number of teeth was not significantly associated with dietary hardness. In addition, the associations between dietary hardness, sex, and a history of diabetes were stronger than those between dietary hardness and oral factors. CONCLUSIONS: Occlusal force and contact area were significantly associated with dietary hardness as estimated from the masticatory muscle activity using a daily diet questionnaire.

Application in the analysis of the occlusal force of free-end missing tooth implant restoration with T-SCAN III.

Introduction: The occlusal force of the teeth in the dental arch and the remaining adjacent natural teeth will change after implant restoration with a free-end missing tooth. This study intends to use the T-SCAN III scanner to collect dynamic quantitative data before and after the restoration of free-end implants and to explore the application of the T-SCAN III in redistributing the occlusal force of free-end implants. Methods: In this study, 24 patients with free-end implant restoration were selected, and their occlusion was tested before, immediately after, and 3 months after implant restoration. Results: In all 24 cases, the bite force of the first natural tooth adjacent to the implanted tooth after restoration changed from 19.12% ± 9.48%-12.93% ± 11.47% (p < 0.01). For additional data analysis, all cases were further subdivided by single implant and fixed bridge restorations. In 17 cases, there was a successful follow-up after 3 months. The percentage of the total bite force of dental arch with implant increased from 41.92% ± 10.78%-53.06% ± 10.71% (p < 0.01). Discussion: This study shows that the free-end implant restoration protects the remaining natural teeth, and the patient's missing dental arch bite force improves within 3 months of implant restoration.

The Effect of Denture Adhesives on Denture Quality and Occlusal Force.

INTRODUCTION: Complete dentures (CDs) have been associated with substantial problems regarding edentulous patient's function. Denture adhesives seem to be useful adjuncts to improving retention and stability. METHODS: A clinical study was undertaken to investigate the effect of a denture adhesive (DA) on function in complete denture wearers along with the quality of their CDs. Thirty complete denture wearers participated in the study. The first phase of the experimental procedure comprised 3 groups of measurements performed at 3 distinct time points: the initial measurement (T1), a 2nd measurement after 15 days of DA daily application (T2), and a 3rd measurement following a 15-day washout period (T3). The second phase consisted of the follow-up measurements. The measurements included: recording of relative occlusal force (ROF), distribution of occlusal contacts (DOC) and center of force (COF) using the T-Scan 9.1 device and functional assessment of dentures using the FAD index. RESULTS: The DA use induced a statistically significant increase in ROF (p-value=0.003) and decrease in COF (p-value⟨0.001) and DOC (p-value=0.001). The overall FAD score significantly improved (p-value⟨0.001). CONCLUSIONS: The use of the DA improved the occlusal force, the distribution of occlusal contacts as well as the qualitative characteristics of CDs.

Common eating habit patterns are associated with a high maximum occlusal force and pre-eating cardiac vagal tone.

Background: Masticatory function is associated with nervous function, including autonomic nervous function, and both functions are influenced by human habits. In a previous preliminary study of 53 young women, we found that eating habit patterns were associated with occlusal force as an indicator of masticatory function. Therefore, we hypothesized that relationships exist between occlusal force, the autonomic nervous system, and eating habit patterns. Methods: To test our hypothesis, we analyzed the relationship between heart rate variability measured before and after lunch in 53 young women, and measured and surveyed maximum occlusal force and eating habit patterns, respectively, in these participants. Results: High occlusal force was associated with an increased high-frequency (HF) component (vagal tone index) of the heart rate variability index immediately before lunch (standardized regression coefficient (ß) = 0.417, P = 0.002). Each of the eating habit items surveyed in a questionnaire showed a similar tendency for the HF component immediately before lunch and maximum occlusal force; in particular, "Habit of eating breakfast" and "Number of meals per day" were significantly associated with both variables. Additionally, total eating habit scores related to higher maximum occlusal force were associated with an increase in the HF component immediately before lunch (ß = 0.514, P < 0.001). The maximum occlusal force and the pre-eating HF component values were stratified by total eating habit scores (into low, medium, high categories), and the high scores were significantly higher than the medium or low scores. Conclusions: Occlusal force and the pre-eating cardiac vagal response of individuals were characterized by their common eating habit patterns, indicating that eating habits may be simultaneously associated with the development of masticatory function, nervous system development, and cardiovascular rhythm. Although further research is needed to investigate these relationships in detail, our findings provide insights that will inform the study of physical functions, neurodevelopment, habitual behaviors, and health in humans.

Relationships of physical constitution with occlusal force and masticatory performance in adults with natural dentition.

This study aimed to clarify whether physical constitution affects masticatory function. A total of 251 healthy adults with completely natural dentition participated in this study. Height, weight, and body mass index (BMI) were used as parameters representing physical constitution, and the amount of glucose eluted from chewed gummy jelly and maximum occlusal force was used as parameter representing masticatory function. Handgrip strength was also measured. After comparing each parameter between male and female participants, the relationship between physical constitution and masticatory function was investigated in the combined (male and female) group, the male group, and the female group. The relationship between handgrip strength and masticatory function was also investigated. Stepwise multiple linear regression analysis was performed with masticatory function as the dependent variable and physical constitution as independent variable. The mean values of each parameter were significantly greater in the male group than in the female group. Regarding the relationship between physical constitution and occlusal force, the occlusal force tended to increase as the parameter value representing physical constitution increased, and a significant correlation was observed for all parameters. For masticatory performance, a significant correlation was observed in all parameters in the combined group, but no significant correlations were observed in the male group and in the female group. Multiple linear regression analysis showed that weight was significantly associated with occlusal force. Though occlusal force may be affected by physical constitution, masticatory performance is not easily affected by physical constitution.

Accuracy of optical interocclusal registration using an intraoral scanner.

PURPOSE: This study aimed to clarify the effect of occlusal force on appropriate optical interocclusal registration in clinical practice, considering periodontal ligament and jawbone deformation. METHODS: Forty participants with natural, healthy dentition were enrolled (19 men and 21 women; mean age, 27.7 ± 2.0 years). A TRIOS3 intraoral scanner was used to scan the right lateral first premolar to the second molar areas of the upper and lower jaws. During scanning for interocclusal registration, participants were instructed to "bite normally," "bite lightly," and "bite strongly" to obtain data for the three occlusal patterns. The standard triangulated language (STL) data for each occlusion condition were superimposed using the appropriate software, following which the tooth displacement was calculated. The conventional method was also used to record the occlusal contact area for a silicone model using a dental contact analyzer. RESULTS: Tooth displacement was significantly lower for the strong-bite condition than for the weak-bite condition (0.018 mm vs. 0.028 mm, P<0.05). As the occlusal force increased, the occlusal contact area also increased, and significant differences were observed among the different occlusal conditions (P<0.05). CONCLUSIONS: Occlusal contact area changed depending on the bite force when using the silicone impression or optical intraoral scanning methods. Moreover, using optical impression methods in "strong bite force" may reduce the deviation and allow for stable interocclusal registration.