Clinical evaluation on the use of a new accessory device for Fox plane.

OBJECTIVE: Evaluate the assimilation capacity and ease of handling of the Fox plane accessory by dentistry students, through a questionnaire about the experience in using this device compared to the conventional one. Its intention is to minimize possible interpretation errors and challenges that the traditional method determines. METHODS: After approval by the Research Ethics Committee, registration at Sistema Nacional de Informações sobre Ética em Pesquisa/National Information System on Research Ethics (SISNEP) and signing of the free and informed consent form, 51 undergraduate students treating patients in need of complete dentures at Instituto de Ciência e Tecnologia/Institute of Science and Technology (ICT) Unesp in São José dos Campos completed a questionnaire to evaluate the technical ease of use and provider acceptance. The obtained data were submitted to statistical analysis, evaluating technical ease and acceptance by operators. RESULTS: The results were analyzed using descriptive and inferential statistics using the Jamovi 2.2.5 software. From the responses, the frequency was obtained for each question in the questionnaire, then the weighted mean was calculated, average rating and percentage. With the results of these analyses it was possible to measure the level of satisfaction of the participants in relation to the use of the device. CONCLUSION: It was concluded that most students have difficulty using the conventional Fox plane and that the accessory facilitated the process of determining the superior orientation plane, and its ease of use.

Treatment of severe micrognathia in an adult with distraction osteogenesis: A case report.

Key Clinical Message: Distraction osteogenesis (DO) of the mandible is often performed at a young age, and there are few reports after age 30, as in this case. The Hybrid MMF used in this case was useful in that it allowed correction of fine directionality. Abstract: DO is often performed in young patients with a high capability of osteogenesis. We performed distraction surgery for a 35-year-old man who had severe micrognathia with serious sleep apnea syndrome. Four years postoperatively, suitable occlusion and improvement of apnea were observed.

Evaluation of mid-buccal gingival recessions and occlusal interferences.

BACKGROUND: Dental malocclusions may cause disruption in occlusal harmony, and destructive interferences during mandibular functional movements can be seen. Ideal occlusal contacts during dynamic mandibular movements may be crucial for preventing the occurrence of mid-buccal gingival recession (mbGR). While determining mbGR risk factors in young adults, the effect of occlusal interferences on mbGR has not yet been focused on. Based on this gap, this field needs to be clarified with new studies. OBJECTIVE: The aim of this case-control study was to evaluate the relationships between the presence, extent and severity of mbGRs to dental malocclusions, occlusal interferences in anterior (AG) and lateral guidance (LG) and to determine the potential risk indicators in a young population. METHODS: A total of 149 dental students were comprised and 70 of them presented mbGR(s) and 79 did not (18-25 years, 4553 teeth). Periodontal status was assessed with full mouth bleeding (FMBS) and plaque score (FMPS), probing depth, clinical attachment level, recession depth and keratinised tissue width (KTW) by a periodontist. Malocclusions and occlusal interferences were evaluated by an orthodontist. Logistic regression analyses provided data on the effect of occlusal interferences and the other indicators towards mbGR. RESULTS: The mean of the number of teeth with mbGR(s) per subject was 4.3. The mean of the overall extent of teeth with mbGR(s) was 14.2%. FMBS, decreased KTW, self-reported bruxism, group function occlusion, increased contact number of all teeth and only premolars/molars in AG or LG and Class III malocclusions were significantly associated with the presence of mbGR. Decreased KTW presenting mbGR in the mandible and non-carious cervical lesion adjunct to mbGR significantly increased the odds of the severity of mbGR. Group function occlusion revealed higher mbGRs in premolar/molars than canine guided occlusion. CONCLUSION: Increase in the occlusal interferences in premolars/molars during lateral and anterior guidance may have an effect on the presence and severity of mbGR. Further studies should be designed to confirm these findings.

Parameters Associated with Marginal Bone Loss around Implant after Prosthetic Loading

Abstract This study evaluated retrospectively the association among occlusal, periodontal and implant-prosthetic parameters and marginal bone loss (MBL) around implants and survival rate at 5.7 ±3.2 years of follow-up after prosthetic loading. Eighty-two patients received 164 external hexagon implants. After the standard healing period (3 to 6 months), the implants were restored with single-tooth or up to three splinted crowns. All patients were followed according to a strict maintenance program with regular recalls and clinically evaluated by a calibrated examiner. The MBL measurements taken from standardized radiographs made at permanent crown placement (baseline) and after the last evaluation were calculated considering occlusal, periodontal and implant-prosthetic parameters. Veneer fractures and abutment loosening were not considered failure. Two implants failed during the follow-up period, resulting in a survival rate of 98.8%. Cox regression analyses showed MBL associated with non-working side contacts (p=0.047), inadequate anterior guidance (p=0.001), lateral group guidance involving teeth and implants (p=0.015), periimplant plaque index (p=0.035), prosthetic design (p=0.030) and retention (p=0.006). Inadequate occlusal pattern guide, presence of visible plaque, and cemented and splinted implant-supported restoration were associated with greater MBL around the implant.

Resumo Este estudo avaliou retrospectivamente a associação entre os parâmetros oclusais, periodontais e implante-protéticos e perda óssea marginal (POM) ao redor de implantes e taxa de sobrevivência, em 5,7 ± 3,2 anos de acompanhamento após o carregamento protético. Oitenta e dois pacientes receberam um total de 164 implantes com hexágono externo. Após o período de cicatrização (3 à 6 meses), os implantes foram restaurados com coroa unitária ou até três coroas ferulizadas. Todos os pacientes seguiram um programa de manutenção rigoroso, com consultas regulares e avaliações clinicas realizadas por um examinador calibrado. As medições de POM obtidas de radiografias padronizadas realizadas na colocação da coroa permanente (baseline) e após a última avaliação foram calculadas considerando os parâmetros oclusais, periodontais e àqueles relacionados ao implante e prótese. Fratura na cerâmica de cobertura e afrouxamento do pilar não foram considerados falhas. Dois implantes falharam durante o período de acompanhamento, resultando em uma taxa de sobrevivência de 98,8%.A análise de regressão de Cox mostrou POM associado com contatos no lado de balanceio (p= 0,047), inadequada guia anterior (p=0,001), guia lateral em grupo envolvendo dentes e implantes (p=0,015), índice de placa visível em torno do implante (p=0,035), tipo de prótese (p= 0,030) e retenção (p=0,006). Guia de padrão oclusal inadequado, presença de placa visível e restaurações implanto-suportadas cimentadas e ferulizadas resultaram em maior POM ao redor do implante.

Reconstruction of anterior guidance using duplication technique of CAD/CAM: a case report / 대한치과보철학회지

Comprehensive prosthetic treatment requires considerations from various points of view. The anterior guidance is important factor in prosthodontic treatment of anterior teeth. Lingual surface contour of anterior restoration is so critical that a small mistake of laboratory or clinical process can cause discomfort of patient and disharmony of entire dentition. There are no guidelines for lingual surface contour that fit all patients. Therefore the lingual surface of provisional restoration is most accurately described as a customized one. The dentist transfers the exact information of anterior guidance that has made through long term provisional restoration to the technician. This case introduce that the duplication technique of CAD/CAM system to reproduce the anterior guidance of provisional restoration. This method can improve satisfaction of both patient and dentist.

Effect of gender, facial dimensions, body mass index and type of functional occlusion on bite force

OBJECTIVE: Some factors such as gender, age, craniofacial morphology, body structure, occlusal contact patterns may affect the maximum bite force. Thus, the purposes of this study were to determine the mean maximum bite force in individuals with normal occlusion, and to examine the effect of gender, facial dimensions, body mass index (BMI), type of functional occlusion (canine guidance and group function occlusion) and balancing side interferences on it. MATERIAL AND METHODS: Thirty-four individuals aged 19-20 years-old were selected for this study. Maximum bite force was measured with strain-gauge transducers at first molar region. Facial dimensions were defined by standardized frontal photographs as follows: anterior total facial height (ATFH), bizygomathic facial width (BFW) and intergonial width (IGW). BMI was calculated using the equation weight/height². The type of functional occlusion and the balancing side interferences of the subjects were identified by clinical examination. RESULTS: Bite force was found to be significantly higher in men than women (p<0.05). While there was a negative correlation between the bite force and ATFH/BFW, ATFH/IGW ratios in men (p<0.05), women did not show any statistically significant correlation (p>0.05). BMI and bite force correlation was not statistically significant (p>0.05). The average bite force did not differ in subjects with canine guidance or group function occlusion and in the presence of balancing side interferences (p>0.05). CONCLUSIONS: Data suggest that bite force is affected by gender. However, BMI, type of functional occlusion and the presence of balancing side interferences did not exert a meaningful influence on bite force. In addition, transverse facial dimensions showed correlation with bite force in only men.

Control factors in removable complete dentures: from the articulation quintet to kinetic contact.

Hanau's laws and the so-called articulation quintet have contributed greatly to the evolution of the prosthetic dentistry and have been further elaborated by various authors. The main aim of this study was to establish the stability of prosthetic plates by attaining balanced occlusion. Several authors have addressed the problem of removable and fixed prostheses by classifying mandibular movements into functional and parafunctional movements which extends the classical occlusal mechanics for the modern occlusal feedback model. Moreover, they suggest the use of the angle of convergence as a reference plane when manufacturing prosthetic.