Prospective case series study on the survival rates of occlusal polymethyl methacrylate veneers as a semipermanent therapy in patients with severe pathologic tooth wear.

OBJECTIVES: To evaluate the survival rate of minimally invasive semipermanent occlusal polymethylmethacrylate (PMMA) onlays/veneers in previous temporomandibular disorder (TMD) patients with severe tooth wear and with a loss of vertical dimension after up to 7 years. METHOD AND MATERIALS: This case series was designed as a follow-up evaluation with consecutive patient recruitment. All patients bearing the indication for this kind of rehabilitation were treated by the same clinician using the same adhesive methodology. The study included 22 patients (3 males/19 females), with a mean [SD] age of 50.7 [11.6] years. Controls followed within the first 4 weeks (and subsequently as required). Failure criteria included damage by fracture, chipping, and retention loss. Survival rates were determined based on the Kaplan-Meier analysis. RESULTS: 328 semipermanent occlusal/incisal veneers were included (142 maxillary/186 mandibular teeth). Almost 80% of the restorations were in place and in function when starting the follow-up treatment after 180 days; failures predominantly occurred within the first 3 to 6 months but proved reparable. Depending on the patients' priorities, scheduled replacements followed successively, and more than 65% did not show repair or any renewal needs for more than 360 days. CONCLUSION: Within the limitations of this study the survival rates of occlusal veneers made of PMMA were sufficiently high to allow for consecutive treatment of the respective teeth by means of permanent restorations while preserving the restored vertical dimension. In patients with severe tooth wear and a TMD history, semipermanent restorative therapy with occlusal PMMA onlays/veneers would seem a noteworthy option.

Clinical performance comparison between lithium disilicate and hybrid resin nano-ceramic CAD/CAM onlay restorations: a two-year randomized clinical split-mouth study.

A total of 20 lithium disilicate glass-ceramics (IPS e.max CAD, Ivoclar Vivadent) and 20 resin nano-ceramic (Voco Grandio Blocks) onlay restorations were performed in 20 patients using a split-mouth design to compare the two-year clinical performance of lithium disilicate and resin nano-ceramic onlay restorations. Both restorations were evaluated at baseline, one-year, and two-year clinical follow-ups based on the modified United States Public Health Service (USPHS) criteria. Chi-square and Fisher's exact tests showed no statistically significant difference between Voco Grandio and IPS e.max ceramic restorations for all evaluated parameters during the different follow-up periods (p > 0.05). Cochrane's and MC-Nemar's tests indicated statistically significant differences regarding color match within the Voco Grandio group. They also indicated statistically significant differences in marginal discoloration, marginal adaptation, surface texture, and postoperative hypersensitivity within both ceramic material groups (p < 0.05). Kaplan-Meier curve indicated that the survival rate of both ceramic materials was 90%. After two years of clinical service, IPS e.max CAD and Voco Grandio onlay restorations exhibited similar clinical performance.

In Vitro Comparison of Internal and Marginal Adaptation between Printed and Milled Onlays.

STATEMENT OF PROBLEM: Nowadays, milling is still the gold standard for fabricating indirect restorations, but to overcome its disadvantages, there are alternatives, such as 3D printing. PURPOSE: This study aimed to compare the gaps between the prepared tooth and milled and printed onlays fabricated with the same CAD design. It also aimed to determine the gap reproducibility across onlays fabricated by 3D printing and milling. METHODS: A resin tooth was prepared for an onlay. After scanning the preparation, an onlay was designed with proprietary dental software. Next, 22 onlays were milled in a graphene-reinforced PMMA disc (Group 1), and 22 onlays were 3D-printed with a hybrid composite material (Group 2). After that, all fabricated restorations were scanned and superimposed on the scanned prepared resin tooth. Subsequently, a specific software was used to measure the margin, central, and intaglio-located gap between the milled or printed restoration and the preparation. Finally, measurements were compared with a multifactor analysis of variance. RESULTS: The results demonstrated that printed onlays (Group 2) adapted better to the prepared tooth than the milled ones (Group 1) (p < 0.05). The comparison of standard deviations showed the better gap reproducibility of printed onlays (p < 0.05). CONCLUSION: This study concluded that the printed onlays adapted significantly better to the prepared tooth than the milled onlays. Printed onlays also showed significantly better gap reproducibility.

Evaluation of Internal Adaptation and Marginal Fit of Onlays Fabricated Using Computer-Aided Design (CAD)-Computer-Aided Manufacturing (CAM) and Three-Dimensional Printing Techniques: An In Vitro Study.

Background This in-vitro study aimed to evaluate the internal adaptation, marginal fit, and applicability of digital intraoral impression techniques for onlays fabricated using computer-aided design (CAD)-computer-aided manufacturing (CAM) and three-dimensional (3D) printing techniques using a stereomicroscope and micro-CT scan. Methodology A total of 20 extracted mandibular first molars were selected for this study. The teeth were then divided into two groups. Onlay cavities were prepared involving the mesiobuccal cusp of the mandibular first molar in both groups. After preparation, both blocks were sent to the laboratory for fabrication of onlays using digital impressions (Shinning 3D scanner). Once the onlays were fabricated using CAD-CAM and 3D printing, a replica technique with monophase medium body impression material was used to assess the marginal fit and internal adaptation. The accuracy of internal adaptation was evaluated and compared using a stereomicroscope at 20× magnification. Measurements were taken at proximal margins, the inner axial wall, and the occlusal cavosurface area according to the Molin and Karlsson criteria. The same samples of both groups were studied for marginal fit using a micro-CT scan and values were recorded. The data collected were statistically analyzed using an independent Student's t-test. Results Independent Student's t-test results demonstrated that the mean thickness values of the material in the CAD-CAM group at occlusal cavosurface area, proximal area, and axial area were significantly higher when compared to the 3D printing group at p <0.001 and 0.005, respectively. Conclusions Internal adaptation and marginal fit of 3D-printed onlays were significantly lower than CAD-CAM onlays whereas the accuracy of 3D-printed onlays was significantly better than CAD-CAM onlays.

Three-Dimensional Finite Element Analysis of Worn Molars With Prosthetic Crowns and Onlays Made of Various Materials.

Background/Purpose Restoration of worn teeth represents a challenge for practitioners in terms of preserving dental tissues, achieving restoration requirements, and choosing the most appropriate material. This study aimed to evaluate the effect of both preparation and restoration type on stress distribution in modeled first mandibular molars when functional and parafunctional occlusal forces were applied. Materials and methods The study sample consisted of 40 three-dimensional computer models of restored lower first molars with full crowns (gold, nickel-chrome, lithium disilicate, BruxZir® zirconia, and porcelain fused to metal) and onlays (gold, nickel, chrome, lithium disilicate, and direct and indirect composites). Forces of different intensities and directions were applied, and then finite element analysis was carried out based on the von Mises equivalent stress theory to predict the failure that could occur in the restoring materials and luting cement or bonding agent. Results In functional forces groups, zirconia crowns showed the lowest value of the failure risk, while the highest value was in veneering porcelain with values close to the rest of the models. For onlays, gold onlays represented the best stress distribution with the lowest value of the failure risk, in contrast to the composite onlays that had the highest failure risk. In parafunctional forces groups, the preference remained for zirconia and gold crowns, as well as for metal onlays, with greater differences in the values of the failure risk. Conclusion Gold alloy exhibited better behavior in the stress distribution. All restorations showed similar behavior when applying functional forces; however, when applying parafunctional forces, both gold and zirconia crowns have shown the best results.

Onlays/partial crowns versus full crowns in restoring posterior teeth: a systematic review and meta-analysis.

BACKGROUND: Tooth-colored onlays and partial crowns for posterior teeth have been used increasingly in clinics. However, whether onlays/partial crowns could perform as well as full crowns in the posterior region was still not evaluated thoroughly. METHODS: A literature search was conducted without language restrictions in Pubmed, Embase, Cochrane Central Register of Controlled Trial and Web of science until September 2021. RCTs, prospective and retrospective observational studies with a mean follow-up of 1 year were selected. Cochrane Collaboration's tool was adopted for quality assessment of the RCT. The quality of observational studies was evaluated following Newcastle-Ottawa scale. The random-effects and fixed-effects model were employed for meta-analysis. RESULTS: Four thousand two hundred fifty-seven articles were initially searched. Finally, one RCT was identified for quality assessment and five observational studies for qualitative synthesis and meta-analysis. The RCT was of unclear risk of bias while five observational studies were evaluated as low risk. The meta-analysis indicated no statistically significant difference in the survival between onlays/partial crowns and full crowns after 1 year (OR = 0.55, 95% CI: 0.02-18.08; I2 = 57.0%; P = 0.127) and 3 years (OR = 0.65, 95% CI: 0.20-2.17; I2 = 0.0%; P = 0.747). For the success, onlays/partial crowns performed as well as crowns (OR = 0.58, 95% CI: 0.20-1.72; I2 = 0.0%; P = 0.881) at 3 years. No significant difference of crown fracture existed between the two methods (RD = 0.00, 95% CI: - 0.03-0.03; I2 = 0.0%; P = 0.972). CONCLUSIONS: Tooth-colored onlays/partial crowns performed as excellently as full crowns in posterior region in a short-term period. The conclusions should be further consolidated by RCTs with long-term follow-up.

A Clinical Evaluation of Onlay and Inlay in the Posterior Ceramic Restorations: An Original Study.

Introduction: The extensively damaged teeth can be treated with the inlay and onlay. The ceramic inlays and onlays can be prescribed for the esthetic needs of the patient. Hence in our study, we aim to evaluate clinically the outcomes of the ceramic inlays and onlays for the posterior teeth. Materials and Methods: We piloted a retrospective analytical study from the departmental records. We included 70 patients who had a total of 160 ceramic inlays and onlays prepared between the years 2010-2020. The survival and the failure rates were noted and compared using the "Kruskal-Wallis H statistics and the Chi-square tests" deliberating P < 0.05 as significant. Results: The mean survival was 6.1 ± 1.8 years. The success rate was 92.21% and the failure was 7.6%. Significant variation was seen with the survival rate between the vital and nonvital teeth and between the molars and premolars. Conclusions: The ceramic inlays and onlays were performed successfully in the posterior teeth with a high survival rate and very low failure.

Ceramic Onlay: A Case Report.

With the growing demand for minimally invasive dental restoration, conservative treatment options offer good aesthetic outcomes and durability with minimal tooth reduction. The use of ceramics in dental restoration has been on the rise in the past two decades due to its long-term benefits and capacity to produce a superior bond to tooth structure when used in conjunction with adhesive cement and acid-etch procedures. A ceramic onlay, which covers one or more cusps, also helps to preserve dental tissue. These materials enable the dentist to conservatively prepare the tooth for restoration while also strengthening the patient's own tooth structure. This case report discusses the preparation of a functional and aesthetic ceramic onlay for a patient with a cracked tooth.

Effect of cavity design and material type on fracture resistance and failure pattern of molars restored by computer-aided design/computer-aided manufacturing inlays/onlays.

BACKGROUND: The maximum conservation of tooth structure and the use of restorative materials with elastic modulus close to the dental structure may promote greater longevity of the tooth/restoration complex. This study was conducted to evaluate the effect of cavity design and material type on fracture resistance and failure pattern of molars restored by computer-aided design/computer-aided manufacturing (CAD/CAM) inlays/onlays. MATERIALS AND METHODS: In this in vitro study, 55 human maxillary molars were embedded in resin blocks and divided into control group (CG) and five main groups: Group 1: Inlay, Group 2: Conventional onlay/mesiobuccal (MB), Group 3: Conservative onlay/MB, Group 4: Conventional onlay/MB and distobuccal (DB), and Group 5: Conservative onlay/MB and DB. Then, each group was divided into two subgroups: (A) CeraSmart (CS) and (B) Katana Zirconia (KZ). Restorations were cemented by RelyX Ultimate and then thermocycled. The universal testing machine was used to measure fracture loads. Failure was determined using a magnifying lens. Data were statistically analyzed using ANOVA followed by Tukey's post hoc test (P < 0.05). RESULTS: Group 5 showed the highest significant fracture load, whereas the least significant value was recorded in Group 2. KZ recorded higher significant fracture loads than CS in all tested groups. Groups 1, 2, and 3 restored by CS showed lower fracture load than CG, but the difference was insignificant with Group 1. CS restorations showed restorable failure, while unrestorable pattern was predominant in KZ restorations (P < 0.05). CONCLUSION: KZ inlays and onlays can be used safely in terms of fracture resistance as both have values exceed the physiologic requirements. CS inlays and onlays/MB and DB are of fracture resistance comparable to intact teeth. The use of conservative onlay design with more cusp coverage guarantees better resistance of CS restorations. Being force absorbing material, the predominant failure of teeth restored by CS was restorable.

Mechanical Behavior of Different Restorative Materials and Onlay Preparation Designs in Endodontically Treated Molars.

This study evaluated the effect of the combination of three different onlay preparation designs and two restorative materials on the stress distribution, using 3D-finite element analysis. Six models of first lower molars were created according to three preparation designs: non-retentive (nRET), traditional with occlusal isthmus reduction (IST), and traditional without occlusal isthmus reduction (wIST); and according to two restorative materials: lithium-disilicate (LD) and nanoceramic resin (NR). A 600 N axial load was applied at the central fossa. All solids were considered isotropic, homogeneous, and linearly elastic. A static linear analysis was performed, and the Maximum Principal Stress (MPS) criteria were used to evaluate the results and compare the stress in MPa on the restoration, cement layer, and tooth structure (enamel and dentin). A novel statistical approach was used for quantitative analysis of the finite element analysis results. On restoration and cement layer, nRET showed a more homogeneous stress distribution, while the highest stress peaks were calculated for LD onlays (restoration: 69-110; cement layer: 10.2-13.3). On the tooth structure, the material had more influence, with better results for LD (27-38). It can be concluded that nRET design showed the best mechanical behavior compared to IST and wIST, with LD being more advantageous for tooth structure and NR for the restoration and cement layer.

Does overlay preparation design affect polymerization shrinkage stress distribution? A 3D FEA study.

This study evaluated the polymerization shrinkage stress of three tooth preparation designs for indirect ceramic overlay by finite element analysis: isthmus preparation (IST); without isthmus preparation (wIST); and non-retentive preparation (nRET). The models were created based in prepared dental typodonts and were digitally impressed with an intraoral scanner. The interfaces in all models were considered perfectly bonded and all materials were considered homogeneous, linear, and isotropic. The polymerization shrinkage of the cement layer (100 µm) was simulated and evaluated by maximum principal stress criteria. The stress peaks followed this sequence: restoration = IST (13.4 MPa) > wIST (9.3 MPa) > nRET (9 MPa); cement layer = IST (16.9 MPa) > wIST (12.6 MPa) > nRET (10-7.5 MPa); and teeth = IST (10.7 MPa) > wIST (10.5 MPa) > (9 MPa). For the cement layer, the non-retentive preparation (nRET) had the lowest shrinkage stress from all the groups, obtaining a more homogeneous stress distribution on the cement surface. Regarding the abutment teeth, the IST generated a higher shrinkage stress area on the dental structure, concentrating higher stress magnitude at the axiopulpar and axiogingival angles. Non-retentive preparation seems to reduce polymerization shrinkage stress.

Effect of Inlays, Onlays and Endocrown Cavity Design Preparation on Fracture Resistance and Fracture Mode of Endodontically Treated Teeth: An In Vitro Study.

PURPOSE: To evaluate the fracture resistance and failure modes of endodontically treated mandibular molars restored with different designs of inlays, onlays and endocrowns. MATERIALS AND METHODS: Extracted mandibular third molars (n = 180) were used. An access cavity was prepared on the occlusal surface of each tooth and the roots were obturated with gutta percha. All specimens were randomly divided into 6 groups (n = 30/group) according to the cavity design and the restoration material used. C: control group without access cavity preparation. IE: MOD inlay preparation with EverX Posterior (GC Europe) in the pulp chamber. IG: MOD inlay preparation with G-aenial Universal Flo (GC America) in the pulp chamber. OE: onlay preparation with EverX Posterior (GC Europe) in the pulp chamber. OG: onlay preparation with G-aenial Universal Flo (GC America) in the pulp chamber. EC: endocrown with an empty pulp chamber. All restorations were fabricated with CAD/CAM system using CERASMART® (GC Dental products Europe, Belgium) CAD/CAM blocks. Specimens were thermal-cycled and were subjected to a compressive load applied at 30° angle relative to the long axis of the tooth with a universal testing machine. Results were statistically analyzed by ANOVA followed by Tukey post hoc tests. Chi-square test and Fisher Exact tests were used for the comparisons among groups. RESULTS: The mean fracture strength was significantly different between the groups (p < 0.001); it was significantly highest for intact teeth, followed by endocrowns (p = 0.021). The strength was significantly lower for inlays (with G-aenial Universal Flo and EverX Posterior), intermediate for onlays with EverX Posterior followed by onlays with G-aenial Universal Flo. CONCLUSIONS: Endocrowns exhibited higher fracture resistance than other tested composite resin groups. Endocrowns and onlays showed a more favorable failure mode than inlay restorations.

Endocrown: una alternativa rehabilitadora a las restauraciones rígidas totales clásicas / Endocrown: a rehabilitative alternative to

La restauración ideal en los dientes tratados endodónticamente (DTE) ha sido un tema controversial y ampliamente discutido en la literatura odontológica. El alto índice de fracasos en los dientes endodónticos se asocia principalmente a la falta de un adecuado sellado coronario, motivo por el cual la restauración post endodóntica cumple un papel fundamental. Los propios tejidos del DTE constituyen el refuerzo más importante de la pieza dentaria. La odontología considerada hoy en día como ideal es la mínimamente invasiva. A su vez la restauración de elección deberá ser aquella que respete mayor cantidad de tejido remanente a la hora de seleccionar la restauración coronaria. Se deberá considerar la cantidad y la calidad del remanente dentario sano, como los requisitos funcionales de cada pieza en particular. Si bien existen diversos tipos de restauraciones que podrían rehabilitar un DTE, en este trabajo sólo nos referiremos a las de inserción rígida, específicamente a las endo-onlays, también denominadas endocrowns (AU)

Clinical Behavior of Ceramic, Hybrid and Composite Onlays. A Systematic Review and Meta-Analysis.

A systematic review and meta-analysis was performed to analyze the survival of onlay restorations in the posterior region, their clinical behavior according to the material used (ceramic reinforced with lithium disilicate, conventional feldspathic ceramic or reinforced with leucite; hybrid materials and composite), possible complications, and the factors influencing restoration success. The systematic review was based on the preferred reporting items for systematic reviews and meta-analyses (PRISMA) statement, without publication date or language restrictions. An electronic search was made in the PubMed, Scopus, Embase, and Cochrane databases. After discarding duplicate publications and studies that failed to meet the inclusion criteria, the articles were selected based on the population, intervention, comparison, outcome (PICO) question. The following variables were considered in the qualitative and quantitative analyses: restoration survival rate (determined by several clinical parameters), the influence of the material used upon the clinical behavior of the restorations, and the complications recorded over follow-up. A total of 29 articles were selected for the qualitative analysis and 27 for the quantitative analysis. The estimated restoration survival rate was 94.2%. The predictors of survival were the duration of follow-up (beta = -0.001; p = 0.001) and the onlay material used (beta = -0.064; p = 0.028). Composite onlays were associated with a lower survival rate over time. Onlays are a good, conservative, and predictable option for restoring dental defects in the posterior region, with a survival rate of over 90%. The survival rate decreases over time and with the use of composite as onlay material.

Marginal adaptation of zirconia-reinforced lithium silicate overlays with different preparation designs.

OBJECTIVE: Following the advent of strong adhesive bonding, the conservative tooth preparation designs without a retentive form gained increasing popularity. This study aimed to evaluate the marginal adaptation of zirconia-reinforced lithium silicate (ZLS) overlays with different preparation designs. MATERIALS AND METHODS: Forty sound human maxillary first molars were collected and divided into four groups (n = 10) according to their preparation design for the fabrication of ZLS overlays: (O) anatomical occlusal reduction, (OS) anatomical occlusal reduction with rounded shoulder, (OG) anatomical occlusal reduction with a central groove, and (OSG) anatomical occlusal reduction with rounded shoulder and central groove. A video measuring machine (VMM) was used to measure the marginal gap. Statistical analysis was carried out using one-way ANOVA followed by paired t test and Tukey's test (α = .05). RESULTS: The gap size was significantly different between the groups both before (P = .004) and after (P = .008) cementation, and it was significantly smaller in group O than group OSG (P = .002 before and P = .004 after cementation). Marginal gap increased in all groups following cementation (P < .001). CONCLUSIONS: Group O showed comparable marginal adaptation with groups OS and OG while group OSG with the most complex design showed the lowest marginal adaptation for ZLS overlays. CLINICAL SIGNIFICANCE: According to the results of this in vitro study, it may be stated that for defect-free teeth requiring occlusal restoration, the occlusal surface preparation alone would suffice to achieve optimal marginal adaptation, and retentive and more invasive preparation designs are not required.

A comparison of mvM stress of inlays, onlays and endocrowns made from various materials and their bonding with molars in a computer simulation of mastication - FEA.

OBJECTIVES: The purpose of the study was to compare the mvM stresses occurring in inlays, onlays and endocrowns made from different materials and their bonding with molars in a computer simulation of mastication. METHODS: The study was conducted using the finite elements method with contact elements. Sixteen 3D first molar models were created of a intact tooth - T; a tooth with a ceramic inlay - IN; a tooth with an onlay - ON; and a tooth with an endocrown - EN. The restorations were made of: Comp - resin nanoceramic; Hc - hybrid ceramic; Le - leucite ceramic; Dlit - lithium disilicate; and Zr - zirconia. Computer simulations of mastication were performed. The equivalent stresses according to the modified von Mises criterion (mvM) were calculated in model materials and contact stresses at the interface cement-dental tissue around the examined restorations. RESULTS: The highest equivalent mvM stresses were concentrated in buccal margins of inlays. The mvM stresses recorded in onlays were 1.6-5 times lower than those found in inlays, while in endocrowns they were 2.3-6.5 times lower. Around the onlays and endocrowns, in tooth structures and luting cement, mvM stresses were significantly lower compared to teeth restored with inlays. The tensile and shear contact stresses between inlays and teeth were several times lower than under another restorations. The highest stresses (58.5MPa) occurred in the zirconia inlay. The stresses observed in the enamel of a tooth restored with an INZr inlay were half those noted in INComp, and a third of those observed in cement. Tensile contact stresses at the interface between the INZr inlay and dental tissue were 4.5 times lower than in the INComp, and the shear stresses were more than 7 times lower. SIGNIFICANCE: The highest values and unfavorable of stress levels occurred in teeth restored with inlays. Cavities MOD in molars should be reconstructed with cusp-covering restorations. The endocrown in molars should withstand physiological loading. The higher the modulus of elasticity of the restoration material, the higher the stresses in the restorations, while the lower stresses were observed in the tooth structures, luting cement and at the interface between the restoration and the dental tissue. Ceramic restorations should provide better protection and marginal seal of the reconstructed tooth than composite ones.

Effect of Tooth Preparation Design on Fracture Resistance of Zirconia-Reinforced Lithium Silicate Overlays.

PURPOSE: To assess the effect of tooth preparation design on fracture resistance of zirconia-reinforced lithium silicate overlays. MATERIALS AND METHODS: This study evaluated 50 human maxillary first molars with no caries, restorations or anatomical defects. The teeth were randomly divided into five groups (n = 10/group) based on preparation design for the fabrication of overlay restorations: (O) anatomical occlusal reduction, (OS) anatomical occlusal reduction with round shoulder preparation, (OG) anatomical occlusal reduction with a central groove, (OSG) anatomical occlusal reduction with round shoulder preparation and central groove, and (C) no preparation of tooth (control group). All restorations were fabricated using zirconia-reinforced lithium silicate (Vita Suprinity). The specimens underwent thermomechanical fatigue loading in a masticatory simulator (1.2 million cycles at 98 N). Fracture resistance was measured using a universal testing machine. The mode of failure was determined as well. Data were analyzed using one-way ANOVA followed by Tukey's post-hoc test, paired t-test and Fisher's exact test (α = 0.05). RESULTS: Group O showed significantly higher fracture resistance than groups OG and OSG (p = 0.002 and p = 0.001, respectively). The fracture resistance of group OS was significantly higher than that of group OSG (p = 0.008). The fracture resistance of the control group was significantly higher than that of OG and OSG (p = 0.001) and had no significant difference with other groups. CONCLUSIONS: Group O (anatomical occlusal reduction alone), which had the most conservative preparation design, yielded the highest fracture resistance.

Integrity of dural closure after autologous platelet rich fibrin augmentation: an in vitro study.

BACKGROUND: Watertight closure of the dura mater is fundamental in neurosurgery. Besides the classical suturing techniques, a variety of biomaterials have been proposed as sealants. Platelet rich fibrin (PRF) is an autologous biomaterial which can readily be obtained through low-speed centrifugation of patient's own blood. It is rich in fibrin, growth factors, leucocytes and cytokines and has shown adhesive properties while promoting the physiological wound healing process. In this study, we investigated the effect of applying PRF in reinforcing the watertight dura mater closure. METHODS: We created an in vitro testing device, where the watertight dura mater closure could be hydrostatically assessed. On 26 fresh harvested bovine dura maters, a standardised 20-mm incision was closed with a running suture, and the leak pressure was measured first without (primary leak pressure) and then with PRF augmentation (secondary leak pressure). The two groups of measurements have been statistically analysed with the Student's paired t test. RESULTS: The "running suture only group" had a leak pressure of 10.5 ± 1.2 cmH2O (mean ± SD) while the "PRF-augmented group" had a leak pressure of 47.2 ± 2.6 cm H2O. This difference was statistically significant (p < 0.001; paired t test). CONCLUSIONS: Autologous platelet rich fibrin augmentation reliably reinforced watertight closure of the dura mater to a > 4-fold increased leak pressure after failure of the initial standard running suture technique.

Clinical evaluation of chairside Computer Assisted Design/Computer Assisted Machining nano-ceramic restorations: Five-year status.

OBJECTIVES: This investigation was a longitudinal, randomized clinical trial to measure the clinical performance of a nano-ceramic material (Lava Ultimate/3M) for chairside Computer Assisted Design/Computer Assisted Machining (CAD/CAM) fabricated restorations. MATERIALS AND METHODS: One hundred and twenty chairside CAD/CAM onlays were restored with a CEREC system randomly assigned to 60 leucite-reinforced ceramic (IPS EmpressCAD/Ivoclar Vivadent AGBendererstrasse 2FL-9494 SchaanLiechtenstein) onlays and 60 nano-ceramic (Lava Ultimate/3M) onlays. Equal groups of onlays were cemented using a self-etch and a total etch adhesive resin cement. The onlays were recalled for a period of 5 years. RESULTS: At 1 week postoperatively, 10% of the onlays cemented with both the self-etch and total etch adhesive resin cements were reported as slightly sensitive. However, all patients were asymptomatic by the 4th week without treatment. Four leucite-reinforced onlays and one nano-ceramic onlay fractured and required replacement. CONCLUSIONS: Adhesive retention with a self-etch or total etch cementation technique resulted in a similar clinical outcome with no reported debonds. The nano-ceramic onlays had a lower incidence of fracture compared to the leucite-reinforced ceramic onlays with both having a very low risk of fracture. Nano-ceramic onlays performed equally as well as glass ceramic onlays over 5 years of clinical service. CLINICAL SIGNIFICANCE: Ceramic materials have been a mainstay for chairside CAD/CAM restorations for the past 30 years and a new category of resilient ceramics with a resin matrix has been introduced reported to offer ceramic-like durability and esthetics with resin-like efficiency in handling. There are no long-term clinical studies on the performance of these materials. This is a 5-year randomized clinical trial on the performance of nano-ceramic onlays.

The marginal discrepancy of lithium disilicate onlays: Computer-aided design versus press.

AIM: The aim of the study was to evaluate and compare the vertical marginal discrepancy of computer-aided design (CAD)/computer-aided manufacturing (CAM) and pressable lithium disilicate onlays. MATERIALS AND METHODS: A maxillary first premolar typodont tooth was prepared to receive lithium disilicate onlay. Mesio-occluso-distal cavity was prepared with palatal cusp reduction and collar preparation. In the proximal box, gingival seat was placed 1 mm coronal to the cementoenamel junction and mesiodistal width of the seat was kept to 1 mm. Thirty stone models were prepared from thirty rubber base impressions and divided into two groups, based on the technique of fabrication of onlays: (1) Group CL (CAD/CAM lithium disilicate) and (2) Group PL (Pressable lithium disilicate). Fifteen onlays per each group were fabricated by following the manufacturer instructions. Marginal fit of all the samples were analyzed by using stereomicroscope with Image Analysis software. Statistical analysis was done by t-test. RESULTS: Statistical significant difference was found between both the groups. The lowest marginal discrepancy (41.46 µm) was measured for Group CL (CAD/CAM lithium disilicate) specimens, and the highest (55.95 µm) discrepancy was observed on the Group PL (Pressable lithium disilicate) specimens. CONCLUSION: Although there was a statistically significant difference between the two groups, marginal gap of both the groups were in clinically acceptable levels.