Influência de drogas anticonvulsivantes no tratamento ortodôntico / Influence of anticonvulsant drugs on orthodontic treatment

As drogas utilizadas para prevenção de convulsões podem impactar na movimentação dentária durante o tratamento ortodôntico. O objetivo deste estudo foi avaliar a influência de drogas anticonvulsivantes no tratamento ortodôntico. O desenho deste estudo é uma revisão narrativa da literatura onde uma busca eletrônica foi realizada sem restrição de idioma e data em três bases de dados (PubMed via MEDLINE, SCOPUS e BVS). Foram utilizados os seguintes termos para o PubMed e BVS: anticonvulsants drugs AND orthodontic movement e para o SCOPUS: anticonvulsants AND drugs AND orthodontic AND movement. Uma pesquisa complementar foi realizada nas referências bibliográficas dos estudos incluídos. Os artigos indicaram que o uso de medicação anticonvulsivante favorece o desenvolvimento de hiperplasias gengivais, xerostomia e alterações no metabolismo ósseo que modulam a taxa de movimentação ortodôntica. Dentro das limitações desta revisão, concluiu-se que não há contraindicações para tratamento ortodôntico em pacientes utilizando anticonvulsivantes, no entanto os ortodontistas devem estar cientes dos potenciais efeitos adversos advindos do uso desses medicamentos para que possam adotar medidas para mitigar esses riscos.

Drugs used to prevent seizures can have an impact on tooth movement during orthodontic treatment. This study aimed to evaluate the influence of anticonvulsant medications on orthodontic treatment. The design of this study is a narrative literature review in which an electronic search was carried out without language or date restriction in three databases (PubMed/MEDLINE, SCOPUS, and BVS). The following terms were used for PubMed and BVS: anticonvulsants drugs AND orthodontic movement and SCOPUS: anticonvulsants AND drugs AND orthodontic AND movement. A complementary search was carried out on the bibliographical references of the included studies. The articles indicated that using anticonvulsant medication favors the development of gingival hyperplasia, xerostomia, and alterations in bone metabolism that modulate the rate of orthodontic movement. Within the limitations of this review, it was concluded that there is no contraindication for orthodontic treatment in patients using anticonvulsants. However, orthodontists should be aware of the potential adverse effects arising from the use of these drugs so that they can adopt measures to minimize these risks.

Have orthodontists changed their retention and follow-up protocols due to contemporary orthodontics? An online survey.

Background: With advancements in orthodontic technology, treatment durations have shortened, often concluding at earlier ages. This shift prompts scrutiny of contemporary retention and post-treatment protocols. The study aimed to assess current professional preferences, compare them against patient age and treatment duration, and investigate the potential impacts of reduced treatment times on professional protocols, particularly when treatment concludes before pubertal growth. Methods: A questionnaire comprising 12 multiple-choice questions focused on active treatment and retention phases was developed using an online survey platform. It was distributed to licensed orthodontists engaged in patient treatment. Bivariate analysis was conducted using ANOVA and the Kruskal-Wallis test, with pairwise comparisons facilitated by the Dwass-Steel-Critchlow-Fligner method. Results: Of 743 respondents, representing a 32% response rate, approximately 70% reported initiating treatment with fixed appliances in pre-pubertal patients. The most prevalent treatment combination involved commencing treatment during early permanent dentition and lasting between 12 to 24 months, resulting in treatment completion before full growth maturation. No discernible individualization was observed in retention protocols or post-retention follow-ups. Traditional retainer prescription post-orthodontic therapy was unanimous among respondents. Notably, experienced orthodontists tended to prefer regular patient visits for follow-up, while less experienced counterparts discharged patients after 12 months. Conclusion: Contemporary orthodontic treatments are characterized by shorter durations, yet orthodontists have not adopted retention and post-treatment follow-up practices accordingly. There is a pressing need for evidence-based guidelines to develop protocols tailored to the shorter treatment durations and the increasing prevalence of younger patients completing treatment.

Occlusal Plane, Mandibular Position and Dentoalveolar Changes during the Orthodontic Treatment with the Use of Mini-Screws.

This study aimed to describe the changes produced on the occlusal plane (OP), the mandibular position and the dentoalveolar compensations of patients with distalization of the maxillary/mandibular arch assisted by mini-screws (MS). A descriptive case-series study was performed using the digital lateral cephalograms (DLC) of nine patients who underwent orthodontic treatment and required the use of MS for a complete distalization of the maxillary/mandibular arch. Records were collected at three different times (T1-T2-T3) and digitally analyzed (variables: Skeletal diagnosis; maxillary occlusal plane; position of the maxilla/mandible; and dentoalveolar changes of the distalization arch tracing the longitudinal axis of incisors/molars regarding the palatal/mandibular plane). Findings show that the OP varied from T1-T2-T3 in all cases, indicating its stepping or flattening. ODI, APDI, SNA, SNB, and ANB changed minimally in all cases, without variations in the mandibular position or in the skeletal diagnosis. Dentoalveolar measurements also showed differences between T1-T2-T3. In summary, conventional orthodontic treatment modified the OP during the first phase of treatment. Moreover, the distalization mechanics with MS changed the OP and produced dentoalveolar changes, mainly in the inclination of incisors and molars. Other measures considered in the study did not change substantially.

Impact of orthodontic treatment with aligners on the oral health-related quality of life of patients with trisomy 21.

OBJECTIVE: To assess the impact of treatment with orthodontic aligners (OA) on oral health-related quality of life (OHRQoL) in patients with trisomy 21 (T21) compared to non-syndromic patients. MATERIALS AND METHODS: The sample consisted of 30 patients, both sexes, aged between 11 and 35 years, divided into two groups: T21 (n = 10, patients with T21, treated prospectively) and CONTROL (n = 20, control group, non-syndromic patients, from the Orthodontic Laboratory of UNOPAR). In both groups, patients were treated with Invisalign orthodontic aligners (Align Technology), following the same treatment parameters. Participants, assisted by their caregivers, when necessary, answered Oral Health Impact Profile (OHIP-14) instrument and the patient's guardians answered the Oral Health Scale for People with Down's syndrome (OHDS) instrument, before (T0) and after 30 (T1), 180 (T2), and 365 (T3) days from the start of treatment. Friedman tests with Bonferroni correction and Mann-Whitney tests were used (p < .05). RESULTS: For the OHDS instrument, it was observed that for the eating and communication domains and an overall score, the treatment with OA positively impacted the lives of T21 patients (p < .05). Regarding the OHIP-14 instrument, the intragroup evaluation showed that in the CONTROL group, there was no significant difference between the evaluated times; while for the T21 group, there was a significant positive impact (p < .05). CONCLUSION: The results showed that the treatment with aligners positively impacted the OHRQoL of T21 patients, and these results were perceived by caregivers, mainly in relation to issues related to eating and communication.

Effect of estrogen depression on alveolar bone microarchitecture and periodontal ligament cells during orthodontic movement.

This study aimed to evaluate the effects of the estrogen depression during orthodontic tooth movement on alveolar bone microarchitecture and periodontal ligament. Female Wistar rats were divided into two groups, one consisting of non-ovariectomized animals subjected to orthodontic tooth movement, and one comprising ovariectomized animals subjected to orthodontic tooth movement. Micro-CT assessment of bone volume to total volume (BV/TV), total porosity, trabecular thickness (Tb.Th), trabecular number (Tb.N), and trabecular separation (Tb.Sp) in the alveolar bone of the orthodontically moved tooth was performed. Histomorphometric analyses were made in the periodontal ligament, and immunoexpression of RANK, RANKL, OPG, and TUNEL were quantified. Orthodontic tooth movement in the group of ovariectomized rats was faster than in non-ovariectomized animals. The alveolar bone area showed lower values of BV/TV and trabecular thickness, and higher bone porosity and trabeculae numbers in the ovariectomized rats. Histological analyses in the ovariectomized group revealed an increase in collagen fibers in the periodontal ligament. The apoptotic cell counts in the periodontal ligament were higher in the group of ovariectomized rats than in the sham-operated rats. Ovariectomy resulted in an increase in tooth movement and alteration of the alveolar bone microstructure in the first 7 day of orthodontic tooth movement, and in the presence of apoptotic cells in the periodontal ligament.

Dentoalveolar effects of open-bite correction with the dual action vertical intra-arch technique: A finite element analysis.

Objective: To evaluate tooth displacement and periodontal stress generated by the dual action vertical intra-arch technique (DAVIT) for open-bite correction using three-dimensional finite element analysis. Methods: A three-dimensional model of the maxilla was created by modeling the cortical bone, cancellous bone, periodontal ligament, and teeth from the second molar to the central incisor of a hemiarch. All orthodontic devices were designed using specific software to reproduce their morpho-dimensional characteristics, and their physical properties were determined using Young's modulus and Poisson's coefficient of each material. A linear static simulation was performed to analyze the tooth displacements (mm) and maximum stresses (Mpa) induced in the periodontal ligament by the posterior intrusion and anterior extrusion forces generated by the DAVIT. Results: The first and second molars showed the greatest intrusion, whereas the canines and lateral incisors showed the greatest extrusion displacement. A neutral zone of displacement corresponding to the fulcrum of occlusal plane rotation was observed in the premolar region. Buccal tipping of the molars and lingual tipping of the anterior teeth occurred with intrusion and extrusion, respectively. Posterior intrusion generated compressive stress at the apex of the buccal roots and furcation of the molars, while anterior extrusion generated tensile stress at the apex and apical third of the palatal root surface of the incisors and canines. Conclusions: DAVIT mechanics produced a set of beneficial effects for open-bite correction, including molar intrusion, extrusion and palatal tipping of the anterior teeth, and occlusal plane rotation with posterior teeth uprighting.

Inhibition of the Growth of Escherichia coli and Staphylococcus aureus Microorganisms in Aesthetic Orthodontic Brackets through the In Situ Synthesis of Ag, TiO2 and Ag/TiO2 Nanoparticles.

Plaque control is especially important during orthodontic treatment because areas of the teeth near brackets and wires are difficult to clean with a toothbrush, resulting in debris buildup of food or dental plaque, thus causing caries and periodontal disease. The objective of this study was to evaluate the antimicrobial properties of silver nanoparticles (AgNPs), titanium dioxide nanoparticles (TiO2NPs), and silver/titanium dioxide nanoparticles (Ag/TiO2NPs), synthesized on the surface of α-alumina ceramic brackets. The AgNPs and TiO2NPs were synthesized by a simple chemical method, and these were characterized by XRD, SEM, and XPS TEM; the antimicrobial activity was tested against Staphylococcus aureus and Escherichia coli by diffusion test. The results of this study demonstrated that by this simple chemical method, silver and titanium dioxide nanoparticles can be synthesized on the surface of α-alumina esthetic brackets, and these NPs possess good antimicrobial activity and the possibility of reducing dental caries, periodontal disease, and white spot generated during orthodontic treatment.

Bonding positional accuracy of attachments and marginal adaptation of in-house aligners - A quality improvement laboratory study.

OBJECTIVES: To evaluate the 3D accuracy of attachment positioning and the adaptation of aligners to attachments using in-house templates made with either polyethylene terephthalate glycol (PETG) or ethylene-vinyl acetate (EVA) and either pressure or vacuum thermoforming machines. MATERIALS AND METHODS: Overall, 140 test specimens were resin-printed. Templates for the attachment bonding were made with 1-mm EVA or 0.5-mm PETG laminates. Orthodontic aligners were manufactured with 0.75-mm PETG. The thermoplastification process was carried out using either vacuum or pressure machines. The positional differences between the virtual and bonded attachments were assessed in the X, Y and Z coordinates. The marginal adaptation between the aligners and the attachments was measured. RESULTS: Minor inaccuracies in the positioning of the attachments were observed in all combinations of thermoforming machines and plastic laminates used to fabricate the templates, mainly in the superior-inferior (Z) dimension. PETG performed better than EVA in the anterior region (p < .05). No association was found between thermoplastification machines and the accuracy of the positioning of the attachments (p > .05). While small misadaptations between the aligners and the attachments were observed, the EVA templates performed better than the PETG templates. CONCLUSIONS: The inaccuracy of the attachment positioning and the misadaptation of the aligners to the attachments were slight. The vacuum and pressure thermoplastification machines showed no difference in attachment positioning accuracy. The PETG template was better than the EVA template in the anterior region, but the EVA attachments presented a better adaptation to the aligners than the PETG attachments.

[Fixed orthodontic appliances and clear aligner system: a comparative review]. / Aparatos ortodónticos fijos y el sistema de alineadores transparentes: una revisión comparativa.

One of the biggest controversies in current orthodontics is determining the appliance to use, since today patients seek better results in shorter times, in addition to putting aesthetics first. OBJECTIVE: compare the benefits and disadvantages that arise when using fixed orthodontic appliances and transparent aligners. MATERIALS AND METHODS: An investigation and compilation of specialized bibliographic information on the topic was carried out in scientific search engines such as PubMed, SciElo and Web of Science between the years 1991 to 2023, focused on research work related to the effects of the use of orthodontic appliances. fixed compared to clear aligners. RESULTS: The review was carried out based on 53 articles found that met the selection criteria. CONCLUSION: Fixed orthodontic appliances are better in complex cases, they are more precise and less likely to relapse; Transparent aligners are more aesthetic, hygiene is more affective and the bone density of the mandibular condyle decreases.

Influence of distal-end heat treatment in the properties of heat-activated NiTi archwires.

PURPOSE: The aim of this study was to evaluate the extent of property changes caused by heating the distal portion of heat-activated nickel-titanium (NiTi) wires. METHODS: Forty preformed heat-activated NiTi archwires (3M Unitek, Monrovia, CA, USA) with a nominal cross-section of 0.018″ were used in this study. The archwires were divided into a control group, not submitted to heat treatment and, thus, maintaining the as-received properties, and an experimental group, in which the archwires were submitted to heat treatment for distal bending at one end. Wire segments of control and experimental groups were submitted to differential scanning calorimetry (DSC) and Vickers microhardness measurements. RESULTS: The DSC results suggest local recrystallization and precipitate dissolution at the heat-treated tip, which decreases as the distance to the wire's tip increases. Vickers microhardness tests revealed significant changes for distances between 6 and 8 mm from the wire's tip. Heating the distal portion of heat-activated NiTi archwires should be performed with care since this clinical procedure may compromise the performance of these wires to a distance of 8 mm from the archwire end. CONCLUSION: Heat treatment for distal bending in heat-activated NiTi archwires may be performed, with little impact on the areas adjacent to heat treatment. In cases presenting molars requiring significant orthodontic corrections, it should be preferred to apply other techniques to avoid archwire sliding, such as crimpable stops, or to have flame control to avoid placing a heat-treated section in the tubes of these molars.

Periodontal evaluation after maxillary expansion with a tooth-bone-borne expander in growing patients : A randomized clinical trial.

PURPOSE: This two-arm parallel randomized controlled trial aimed to evaluate and compare periodontal changes due to rapid maxillary expansion (RME) using tooth-bone-borne and tooth-borne devices in growing patients via clinical examinations and cone-beam computed tomography (CBCT). MATERIALS AND METHODS: Forty-two eligible patients (aged 11-14 years; transverse maxillary deficiency, posterior crossbite) were screened and divided into two groups based on the treatment received (randomization was performed using computer-generated numeric sequences): hybrid hyrax tooth-bone-borne group (TBB) and hyrax tooth-borne group (TB). The primary outcome was the change in cortical bone thickness (by CBCT). In addition, the clinical attachment level (CAL), gingival recession, and bleeding were assessed. Both examinations were performed before and 3 months after the activation phase. Intergroup comparisons were performed using analysis of covariance (ANCOVA; P < 0.05). RESULTS: Twenty-one patients (12 girls and 9 boys; mean initial age, 13.3 years) were included in the TBB group and 21 (5 girls and 16 boys; mean initial age, 13.2 years) were included in the TB group. The TB group exhibited a decrease in buccal bone thickness in the first premolars and first molars at all three evaluated levels. Specifically, tooth 14 at 3 mm from the enamel-cement junction showed a significant width reduction (0.7 mm; p < 0.001), accompanied by a notable increase in palatal cortical thickness at 6 mm of enamel-cement junction (1.13 mm; p < 0.001). CONCLUSIONS: RME resulted in buccal bone thickness reduction at the first premolar with hyrax treatment. In the molar region, both devices resulted in cortical bone alterations that were less pronounced in the TBB group.

Orthodontic movement after regenerative endodontic procedure in mature permanent tooth associated with dens invaginatus: a case report with 4-year follow-up.

BACKGROUND: Regenerative endodontic procedures (REPs) are innovative treatments aimed at restoring damaged dental structures. However, the effect of orthodontic movement on REP-treated teeth is not well understood and may have significant long-term consequences. This study aimed to evaluate the impact of orthodontic movement on a mature permanent tooth associated with dens invaginatus that has undergone a regenerative endodontic procedure (REP). CASE PRESENTATION: This report describes the case of a 13-year-old healthy male who presented with pulp necrosis and a chronic apical abscess (tooth number 2.2). Following REP according to the American Association of Endodontists' guidelines, the patient began non-extraction orthodontic treatment with fixed appliances after a 9-month healing period, which lasted 17 months in the upper arch. Subsequent follow-ups at 24, 36 and 48 months post-REP revealed an asymptomatic state with minimal cervical discoloration and diminished cold sensitivity. Radiographic analyses revealed periapical healing, mild apical remodeling on tooth 2.2, and moderate apical remodeling on other maxillary incisors. The treated tooth displayed a positive response to both REP and orthodontic treatment, yet further research is required to determine the long-term effects of orthodontics on REP-treated teeth. CONCLUSION: Orthodontic movement following REPs in mature permanent teeth is feasible and do not seem to prone teeth to orthodontic tooth resorption. Our experience indicates that a 9-month healing period allows successful orthodontic outcomes following REPs. Nonetheless, the predictability of outcomes and the ideal healing period before orthodontic movement is initiated remain to be established.

Effect of time and photoactivated face on bond strength of brackets and on degree of monomer conversion.

OBJECTIVE: To evaluate the effect of four different photoactivation protocols (according to "photoactivated faces" - mesial/distal, cervical/incisal or center - and "photoactivation time" - 6-3 s) of a high-power photo activator (Valo Cordless®-Ultradent) on the shear bond strength (SBS) between metal brackets and dental enamel and on the degree of conversion (DC) of an orthodontic resin. MATERIALS AND METHODS: 40 bovine incisor crowns were randomly assigned to 4 groups (n = 10). The brackets were bonded with Transbond XT® resin using 4 protocols according to the "photoactivation protocol" factor (which was subdivided into photoactivated faces and photoactivation time): V3C = 3 s + center; V6C = 6 s + center; V3M3D = 3 s on mesial + 3 s on distal; V3C3I = 3 s on cervical + 3 s on incisal. All the samples were stored for 4 months (water,37ºC) and then subjected to a SBS test (100KgF,1 mm/min). 40 resin discs were made to evaluate the monomer degree of conversion. Data from the SBS and DC were assessed by One-way ANOVA and Tukey's test (5%). Bond failures were analyzed according to the Adhesive Remnant Index (ARI) and evaluated by the Kruskal-Wallis test (5%). RESULTS: There was a statistically significant difference (p = 0.008) in the One-way ANOVA result for SBS values between all groups, but the protocols showed statistically similar results (p ≥ 0.05-Tukey's tests) concerning the photoactivated faces (V6C, V3M3D and V3C3I) and photoactivation time (V3C and V6C) factors individually. There was no statistically significant difference (p ≥ 0.05) in the One-way ANOVA result for DC values. CONCLUSION: The SBS and DC values will vary depending on the protocol applied. CLINICAL RELEVANCE: It is possible to maintain the bracket fixation quality with the use of a high-power LED photo activator associated with a shorter photoactivation time. However, it is assumed that not all types of protocols that might be applied will provide quality bonding, such as V3C, V3M3D and V3C3I, which may - depending on the SBS and DC values - affect the final treatment time, due to brackets debonding, or increase of possibility of damage to dental enamel during bracket removal. Clinical studies are suggested to confirm the hypotheses of this research.

Agreement between two cephalometric analyses of facial growth direction and biotype / Concordancia entre dos análisis cefalométricos de dirección de crecimiento y biotipo facial

Abstract Cephalometry is a morphological and descriptive diagnostic method that provides relevant data on skeletal and dentoalveolar malocclusions of patients seeking orthodontics treatment. Several authors have proposed different cephalometric measurements to determine facial growth direction and facial biotype, the results of these different measurements from the same patient do not always agree on the diagnosis. The aim of this study was to determine the level of agreement between Ricketts and Björk-Jarabak cephalometric analyses for the determination of facial growth direction and facial biotype in patients from a population of Yucatan, Mexico. A total of 260 lateral cephalograms of patients between 18 and 59 years of age were digitally traced using the Ricketts and Björk-Jarabak cephalometric analyses to determine the direction of facial growth and facial biotype using Dolphin Imagine software. Cohen's kappa statistical test was performed to establish the strength of agreement between the diagnostic results obtained by the cephalometric analyses. A poor diagnostic concordance strength was found for growth direction (K=0.105), and acceptable for facial biotype (K=0.362). The concordance strengths for each diagnostic possibility (level) ranged from slight to acceptable, except for the brachyfacial and dolichofacial biotypes, with a moderate strength of agreement. In conclusion, the Ricketts and Björk- Jarabak cephalometric measurements used for the determination of facial biotype and facial growth direction could suggest non-concordant diagnostic assessments in some individuals.

Resumen La cefalometría es un método diagnóstico morfológico y descriptivo que proporciona datos relevantes sobre maloclusiones esqueléticas y dentoalveolares de pacientes que buscan tratamiento de ortodoncia. Varios autores han propuesto diferentes mediciones cefalométricas para determinar la dirección del crecimiento facial y el biotipo facial, los resultados de estas diferentes mediciones de un mismo paciente no siempre coinciden en el diagnóstico. El objetivo de este estudio fue determinar el nivel de concordancia entre los análisis cefalométricos de Ricketts y Björk-Jarabak para la determinación de la dirección del crecimiento facial y el biotipo facial en pacientes de una población de Yucatán, México. Se trazaron digitalmente un total de 260 cefalogramas laterales de pacientes entre 18 y 59 años de edad utilizando los análisis cefalométricos de Ricketts y Björk-Jarabak para determinar la dirección del crecimiento facial y el biotipo facial utilizando el software Dolphin Imagine. Se realizó la prueba estadística kappa de Cohen para establecer la fuerza de concordancia entre los resultados diagnósticos obtenidos por los análisis cefalométricos. Se encontró una fuerza de concordancia diagnóstica deficiente para la dirección del crecimiento (K=0.105) y aceptable para el biotipo facial (K=0.362). Los niveles de concordancia para cada posibilidad diagnóstica (nivel) variaron de leve a aceptable, excepto para los biotipos braquifacial y dolicofacial, con un nivel de concordancia moderado. En conclusión, las mediciones cefalométricas de Ricketts y Björk-Jarabak utilizadas para la determinación del biotipo facial y la dirección del crecimiento facial podrían sugerir evaluaciones diagnósticas no concordantes en algunos individuos.

Gingival Enlargement Associated with Orthodontics Appliance Increases Protein Carbonylation and Alters Phosphorylation of Salivary Proteome.

Gingival enlargement is a common clinical sign in the gingival diseases associated with orthodontic treatment. Its biological mechanisms are not completely understood; nevertheless, the biochemical changes associated with these inflammatory and overgrowth processes could alter the post-translational protein modifications occurring in various locations within the mouth. Here, changes in the profiles of the carbonylated and phosphorylated proteins in saliva were examined in donors with gingival enlargement (seven men and seven women) and healthy donors (six men and eight women). The sociodemographic characteristics of both groups did not present significant differences. Carbonylation was measured by a quantitative immunoassay (Dot Blot), whereas the profiles of the phosphorylated proteins were visualized by SDS-PAGE with quercetin staining. Some phosphopeptides were also identified using a typical LC-MS-MS approach. Our results showed that gingival enlargement induced a significant increase in oxidative damage in salivary proteins. While a significant reduction in phosphorylation was observed at the stain level in SDS-PAGE, there was a slight increase in the number of phosphorylated proteins identified by MS in samples with gingival enlargement.

Sagittal cranial projections dataset extracted from CBCT volumes corrected to natural head position in a mixed ethnicity population.

This dataset features 200 sagittal projection images derived from Cone Beam Computed Tomography (CBCT) scans, corrected according to the Natural Head Position (NHP) guidelines proposed by Fredrik Lundström and Anders Lundström. The images originate from orthodontic patients in Cali, Valle del Cauca, Colombia, encompassing both initial phases and ongoing treatments. The dataset is divided into two groups: 100 images from female subjects (CoF) and 100 from male subjects (CoM), facilitating gender-specific studies. The dataset is accompanied by an Excel file ``Data info.xlsx'' that details the rotation angles in the axial (Yaw), coronal (Roll), and sagittal (Pitch) planes, along with the pixel size and image dimensions. This detailed documentation supports the replication of studies and aids in the interpretation of cephalometric analyses. Corrections made to align the images with NHP standards involve adjustments in the three main anatomical planes using points from the frontozygomatic suture (Fz) in the axial and coronal planes, and sella (S) and nasion (N) for the sagittal plane.

Pain and root resorption due to surgical interventions to accelerate tooth movement in orthodontics: A systematic review and meta-analysis.

BACKGROUND: There are several publications that show the efficacy of surgical interventions in accelerating the rate of tooth movement in orthodontics. Consequently, possible adverse effects must also be evaluated. OBJECTIVES: The aim of the present study was to compare the perception of pain and root resorption between orthodontic treatment with a surgical acceleration intervention vs. conventional orthodontic treatment. MATERIAL AND METHODS: An electronic search was conducted in the MEDLINE, Scopus, Web of Science (WoS), ScienceDirect, Cochrane Library, and Virtual Health Library (VHL) databases up to September 12, 2022. Randomized or non-randomized, controlled, parallel-arm or split-mouth clinical trials were included. Fixed-and random-effects meta-analyses were performed with regard to heterogeneity. The risk of bias (RoB) was assessed using the RoB 2.0 and ROBINS-I tools. RESULTS: A total of 1,395 articles were initially retrieved, 40 studies were finally included in the review and 15 studies were eligible for quantitative analysis. The meta-analysis showed a significant difference in pain perception between acceleration surgery vs. conventional orthodontics at 24 h (p = 0.040); however, this difference was not significant at 7 days (p = 0.080). Overall, the patients who underwent any acceleration procedure presented significantly less resorption as compared to those who were applied conventional treatment (p < 0.001). A similar significant difference was found in retraction movements (p < 0.001) and alignment movements (p = 0.030). CONCLUSIONS: In the first 24 h, surgical interventions for the acceleration of tooth movement produce a greater perception of pain as compared to conventional orthodontic treatment, but the perception is similar after 7 days. Acceleration surgery results in less root resorption - in alignment movements, and especially in retraction movements.

Expression of artefacts from different orthodontic brackets and wires in cone beam computed tomography scans-an in vitro study.

OBJECTIVES: To investigate artefacts produced by different orthodontic brackets and wires in cone-beam computed tomography (CBCT) scans. MATERIALS AND METHODS: Two dental arches were made using extracted human teeth and plaster. Three pairs of acetate plates containing different brackets - metallic, ceramic, and self-ligating ceramic with NiTi clip - along with a control plate (i.e., without brackets) were prepared. Wire changes (NiTi and steel) were made during CBCT acquisitions, performed with a fixed exposure protocol. Axial slices were selected for mean gray values and standard deviation measurement in three regions of interest (buccal, lingual, and tooth). Noise and contrast-to-noise ratio (CNR) were calculated and compared among the different brackets and wires by ANOVA with a significance level of 5%. RESULTS: Overall, the buccal and tooth region were mostly affected by the metallic and self-ligating brackets, showing higher noise, and lower CNR (p < 0.05). On the other hand, less impact of ceramic brackets in the image quality was observed (p ≥ 0.05). The lingual region did not show expressive differences among the brackets and wire combinations (p ≥ 0.05). The presence of wire associated with the brackets did not worsen image quality (p ≥ 0.05). CONCLUSIONS: In conclusion, metallic and self-ligating brackets have greater artefact expression than ceramic brackets. The wire did not influence image quality. CLINICAL RELEVANCE: One should pay attention to the type of brackets when requesting a CBCT scan during treatment, as metallic and self-ligating brackets may express greater artefacts than ceramic brackets.

Mini-implant assisted palate expansion and digital design in junctional epidermolysis bullosa and amelogenesis imperfecta: Case report.

BACKGROUND: Junctional epidermolysis bullosa (JEB) is one of the four major types of EB caused by genetic variants in the genes coding the proteins of the lamina lucida. All patients with this major type of EB present syndromic hypoplastic amelogenesis imperfecta (AI), with either a pits and fissures or generalized hypoplastic phenotype. Severe forms of AI are associated with compromised oral health-related quality of life (QoL) mostly due to poor dental aesthetics, dentofacial anomalies, and oral pain. AIM: To present the comprehensive dental treatment of a patient with JEB and AI from the age of 20 months until the age of 18 years, including complex orthodontics and digital oral rehabilitation. MATERIALS AND METHODS: A male patient with intermediate JEB (homozygous c.3228+1G>A LAMB3 variant) has been under the care of the special care dentistry clinic of the University of Chile since the age of 20 months. His complex dental needs include structural enamel abnormalities in primary and permanent dentition (hypoplastic generalized AI), severe dental crowding with maxillary compression, Class III skeletal pattern, agenesia (#45), and gingivitis. RESULTS: Pediatric dental care included oral hygiene education and preventive strategies (prophylaxis and fluoride applications), maintaining the dentition free of caries. Due to AI, severe tooth sensitivity hindered proper oral hygiene and required early rehabilitation with temporary polycarbonate and metallic crowns. At the age of 16, the patient began orthodontic treatment. A maxillary expansion was performed with two consecutive mini-implant assisted rapid palate expansion (MARPE) bonded to four mini-implants in the palate. After finishing orthodontic treatment metallic multibrackets (duration 19 months), a definitive oral rehabilitation based on digital smile design with feldspathic crowns of all anterior teeth and premolars was performed. CONCLUSION: Patients with severe generalized hypoplastic syndromic AI associated with JEB benefit from long-term preventive oral care. Complex orthodontic techniques, such as MARPE, and multibrackets can be successfully. Digital smile design provides a definitive oral rehabilitation technique improving oral function, aesthetics, and QoL.

Effective Parameters for Orthodontic Tooth Movement Acceleration with Photobiomodulation: An Umbrella Review.

Objective: To answer this research question: What are the effective wavelength, power, and energy density parameters for achieving dental movement acceleration? Background Data: Photobiomodulation (PBM) has been clinically studied for its ability to accelerate dental movements in orthodontics. However, its effectiveness is dose dependent. Methods: The search was carried out in PubMed, SCOPUS, and ISI Web of Science. The quality of the included systematic reviews was performed using the AMSTAR 2 tool. The risk of bias was assessed using the ROBIS tool. Results: In total, 29 articles in PubMed, 75 in Scopus, and 61 in ISI Web of Science. Finally, only five systematic reviews were included. Conclusions: The results showed the range from 730 to 830 nm as the most effective range of wavelength to accelerate the orthodontic dental movement. A power range of 0.25-200 mW, with emphasis on the direct correlation between power, wavelength, and energy density. Energy density has not been adequately reported in the most randomized controlled clinical trials.