A proof of concept model to calculate white and grey matter AIS injuries in pedestrian collisions.

In the real world, the severity of traumatic injuries is measured using the Abbreviated Injury Scale (AIS) and is often estimated, in finite element human computer models, with the maximum principal strains (MPS) tensor. MPS can predict when a serious injury is reached, but cannot provide any AIS measures lower and higher from this. To overcome these limitations, a new organ trauma model (OTM2), capable of calculating the threat to life of any organ injured, is proposed. The OTM2 model uses a power method, namely peak virtual power, and defines brain white and grey matters trauma responses. It includes human age effect (volume and stiffness), localised impact contact stiffness and provides injury severity adjustments for haemorrhaging. The focus, in this case, is on real-world pedestrian brain injuries. OTM2 model was tested against three real-life pedestrian accidents and has proven to reasonably predict the post mortem (PM) outcome. Its AIS predictions are closer to the real-world injury severity than the standard maximum principal strain (MPS) methods currently used. This proof of concept suggests that OTM2 has the potential to improve forensic predictions as well as contribute to the improvement in vehicle safety design through the ability to measure injury severity. This study concludes that future advances in trauma computing would require the development of a brain model that could predict haemorrhaging.

Tailoring ZnS nanostructures through precipitation-cum-hydrothermal synthesis for enhanced wastewater purification and antibacterial treatment.

This study presents a novel blend of synthesis techniques for shape-controlled ZnS nanoparticles. Zinc sulfide (ZnS) nanoparticles with distinct morphologies cauliflower-like microstructures (∼4.5 µm) and uniform nanospheres (200-700 nm) were synthesized through an innovative blend of precipitation and hydrothermal techniques. Capping with polyvinylpyrrolidone (PVP) significantly decreased crystallite size (3.93 nm-2.36 nm), modulated the band gap (3.57 eV-3.71 eV), and dramatically influenced morphology, highlighting the novelty of shape-controlled synthesis and its impact on optoelectronic and functional properties. X-ray diffraction confirmed crystallinity and revealed the size-controlling influence of PVP. UV-vis spectroscopy suggested potential tuning of optical properties due to band gap widening upon PVP capping. Field-emission scanning electron microscopy (FESEM) unveiled distinct morphologies: cauliflower-like microstructures for ZnS and uniform nanospheres (200-700 nm) for PVP-ZnS. Both structures were composed of smaller spherical nanoparticles, demonstrating the role of PVP in promoting controlled growth and preventing agglomeration. High-resolution transmission electron microscope (HRTEM) images depicted that the majority of nanoparticles maintain a spherical shape, though slight deviations from perfect sphericity can be discerned. Fourier-transform infrared (FTIR) spectroscopy confirmed that successful PVP encapsulation is crucial for shaping nanospheres and minimizing aggregation through steric hindrance. Photocatalytic activity evaluation using methylene blue (MB) dye degradation revealed significantly faster degradation by PVP-ZnS under ultraviolet (UV) irradiation (within 60 min as compared to 120 min for ZnS), showcasing its superior performance. This improvement can be attributed to the smaller size, higher surface area, and potentially optimized band gap of PVP-ZnS. Additionally, PVP-ZnS exhibited promising antibacterial activity against S. aureus and P. aeruginosa, with increased activity at higher nanoparticle concentrations.

QbD Assisted Systematic Review for Optimizing the Selection of PVP as a Ternary Substance in Enhancing the Complexation Efficiency of Cyclodextrins: a Pilot Study.

Inclusion complexes require higher concentration of Beta cyclodextrins (ßCD) resulting in increased formulation bulk, toxicity, and production costs. This systematic review offers a comprehensive analysis using Quality by design (QbD) as a tool to predict potential applications of Polyvinylpyrrolidone (PVP) as a ternary substance to address issues of inclusion complexes. We reviewed 623 documents from 2013 to 2023 and Eighteen (18) research papers were selected for statistical and meta-analysis using the QbD concept to identify the most critical factors for selecting drugs and effect of PVP on inclusion complexes. The QbD analysis revealed that Molecular weight (MW), Partition coefficient (Log P), and the auxiliary substance ratio directly affected complexation efficiency (CE), thermodynamic stability in terms of Gibbs free energy (ΔG), and percent drug release. However, Stability constant (Ks) remained unaffected by any of these parameters. The results showed that low MW (250), median Log P (6), and a ßCD: PVP ratio of 2:3 would result in higher CE, lower G, and improved drug release. PVP improves drug solubility, enhances delivery and therapeutic outcomes, and counteracts increased drug ionization due to decreased pH. In certain cases, its bulky nature and hydrogen bonding with CD molecules can form non-inclusion complexes. The findings of the study shows that there is potential molecular interaction between PVP and ß-cyclodextrins, which possibly enhances the stability of inclusion complexes for drug with low MW and log P values less than 9. The systematic review shows a comprehensive methodology based on QbD offers a replicable template for future investigations into drug formulation research.

Fabrication of bacterial cellulose/PVP nanofiber composites by electrospinning.

This study aimed to address a significant challenge in the application of bacterial cellulose (BC) within tissue engineering and regenerative medicine by tackling its inherent insolubility in water and organic solvents. Our team introduced a groundbreaking approach by utilizing zinc sulfate (ZnSO4) as a solvent to render BC soluble, a novel contribution to the literature. Subsequently, the obtained soluble BC was combined with varying concentrations of polyvinylpyrrolidone (PVP). Notably, we pioneered the fabrication of BC/PVP composite scaffolds with customizable fiber surface morphology and regulated degradation rates through the electrospun technique. Several key parameters, such as PVP concentration (8%, 15%, 12%, and 20% w/v), applied voltage (22, 15, and 12 kV), and a fixed nozzle-collector distance of 10 cm with a flow rate of 0.9 mL/h, were systematically evaluated so as to find the optimum parameter created BC/PVP product with electrospun. For electrospun BC/PVP products, a voltage of 12 kV was found to be optimal. Intriguingly, our findings revealed enhanced cell adhesion and proliferation in BC/PVP electrospun products compared with using PVP membranes alone. Specifically, cell viability for PVP and PVP/BC electrospun products was determined as 50.73% and 79.95%, respectively. In terms of thermal properties, the BC/PVP electrospun product exhibited a mass loss of 82.6% at 380°C, while PVP alone experienced 90.2% mass loss at around 280°C. Furthermore, the protein adhesion capacities were measured at 62.3 ± 1.2 µg for PVP and 99.4 ± 2 µg for BC/PVP electrospun products, whereas product showed no biodegradation over 28 days and had notable water retention capacity. In conclusion, our research not only successfully attained nanofiber morphology but also showcased enhanced cell attachment and proliferation on the BC/PVP electrospun product.

Dissolving microarray patches for transdermal delivery of risperidone for schizophrenia management.

Schizophrenia is a psychiatric disorder that results from abnormal levels of neurotransmitters in the brain. Risperidone (RIS) is a common drug prescribed for the treatment of schizophrenia. RIS is a hydrophobic drug that is typically administered orally or intramuscularly. Transdermal drug delivery (TDD) could potentially improve the delivery of RIS. This study focused on the development of RIS nanocrystals (NCs), for the first time, which were incorporated into dissolving microneedle array patches (DMAPs) to facilitate the drug delivery of RIS. RIS NCs were formulated via wet-media milling technique using poly(vinylalcohol) (PVA) as a stabiliser. NCs with particle size of 300 nm were produced and showed an enhanced release profile up to 80 % over 28 days. Ex vivo results showed that 1.16 ± 0.04 mg of RIS was delivered to both the receiver compartment and full-thickness skin from NCs loaded DMAPs compared to 0.75 ± 0.07 mg from bulk RIS DMAPs. In an in vivo study conducted using female Sprague Dawley rats, both RIS and its active metabolite 9-hydroxyrisperidone (9-OH-RIS) were detected in plasma samples for 5 days. In comparison with the oral group, DMAPs improved the overall pharmacokinetic profile in plasma with a âˆ¼ 15 folds higher area under the curve (AUC) value. This work has represented the novel delivery of the antipsychotic drug, RIS, through microneedles. It also offers substantial evidence to support the broader application of MAPs for the transdermal delivery of poorly water-soluble drugs.

Liraglutide alleviated alpha-pyrrolidinovalerophenone (α-PVP) induced cognitive deficits in rats by modifying brain mitochondrial impairment.

The use of NPS compounds is increasing, and impairment in spatial learning and memory is a growing concern. Alpha-pyrrolidinovalerophenone (α-PVP) consumption, as a commonly used NPS, can impair spatial learning and memory via the brain mitochondrial dysfunction mechanism. Liraglutide isone of the most well-known Glucagon-Like Peptide 1 (GLP-1) agonists that is used as an anti-diabetic and anti-obesity drug. According to current research, Liraglutide likely ameliorates cognitive impairment in neurodegenerative conditions and substance use disorders. Hence, the purpose of this study is examining the effect of Liraglutide on α-PVP-induced spatial learning and memory problems due to brain mitochondrial dysfunction. Wistar rats (8 in each group) received α-PVP (20 mg/kg/d for 10 consecutive days, intraperitoneally (I.P.)). Then, Liraglutide was administered at 47 and 94 µg/kg/d, I.P., for 4 weeks following the α-PVP administration. The Morris Water Maze (MWM) task evaluated spatial learning and memory 24 h after Liraglutide treatment. Bedside, brain mitochondrial activity parameters, including reactive oxygen species (ROS) level, mitochondrial membrane potential (MMP), cytochrome c release, mitochondrial outer membrane damage and swelling, and brain ADP/ATP ratio, were studied. Our results showed that Liraglutide ameliorated α-PVP-induced spatial learning and memory impairments through alleviating brain mitochondrial dysfunction (which is indicated by increasing ROS formation, collapsed MMP, mitochondrial outer membrane damage, cytochrome c release, mitochondrial swelling, and increased brain ADP/ATP ratio). This study could be used as a starting point for future studies about the possible role of Liraglutide in ameliorating mitochondrial dysfunction leading to substance use disorder- induced cognitive impairment.

CS/PVP Hydrogel-Based Nanocapillary for Monitoring Bacterial Growth and Rapid Antibiotic Susceptibility Testing.

Infection with drug-resistant bacteria poses a significant threat to human health. Judicious use of antibiotics could reduce the likelihood of bacterial resistance, which can be evaluated through antibiotic susceptibility testing (AST). This paper focuses on the application of a needle-like nanocapillary tip filled with chitosan (CS)/polyethylene pyrrolidone (PVP) hydrogel based on its specific pH-sensitive properties. The gel-filled nanocapillary has the potential to be used for electrical pH detection with a sensitivity of 3.06 nA/pH and a linear range from 7.3 to 4.3. Such sensitivity for pH measurement could be extended for monitoring of bacterial (such as Escherichia coli and Streptococcus salivarius) growth because of the relationship between pH and bacterial growth. Bacterial growth curves obtained using the hydrogel-filled nanocapillary showed good agreement with the OD600 method. Moreover, this device could be applied for rapid AST for tetracycline and norfloxacin on E. coli with minimum inhibitory concentrations of 2 and 0.125 µg/mL, respectively. This study expands the application of the hydrogel-based nanocapillary for bacterial research by monitoring changes in pH values.

Nanomaterials-incorporated polymeric microneedles for wound healing applications.

There is a growing and urgent need for developing novel biomaterials and therapeutic approaches for efficient wound healing. Microneedles (MNs), which can penetrate necrotic tissues and biofilm barriers at the wound and deliver active ingredients to the deeper layers in a minimally invasive and painless manner, have stimulated the interests of many researchers in the wound-healing filed. Among various materials, polymeric MNs have received widespread attention due to their abundant material sources, simple and inexpensive manufacturing methods, excellent biocompatibility and adjustable mechanical strength. Meanwhile, due to the unique properties of nanomaterials, the incorporation of nanomaterials can further extend the application range of polymeric MNs to facilitate on-demand drug release and activate specific therapeutic effects in combination with other therapies. In this review, we firstly introduce the current status and challenges of wound healing, and then outline the advantages and classification of MNs. Next, we focus on the manufacturing methods of polymeric MNs and the different raw materials used for their production. Furthermore, we give a summary of polymeric MNs incorporated with several common nanomaterials for chronic wounds healing. Finally, we discuss the several challenges and future prospects of transdermal drug delivery systems using nanomaterials-based polymeric MNs in wound treatment application.

Detection of polyvinylpyrrolidone in Daphnia magna: Development of a refractive index quantification method for water-soluble polymers in aquatic organisms.

The water-soluble polymer polyvinylpyrrolidone (PVP) is an established ingredient in pharmaceutical and personal care product (PPCP) formulations. Due to its high usage and lack of biodegradability, it has been detected up to 7.0 mg L-1 in wastewater and 0.1 mg L-1 in the receiving freshwaters, with several studies showing detrimental sublethal effects in a range of aquatic species. A lack of simple analytical methods to detect and quantify PVP currently impacts further investigation into the cause of these sublethal effects. In this paper we propose a refractive index gel-permeation chromatography (GPC) method to quantify PVP, which includes the processing of raw chromatograms using line deconvolution to calculate peak area. The method was then applied to Daphnia magna exposed to PVP for 48 h. A limit of detection (LOD) and limit of quantification (LOQ) of 0.05 and 0.2 mg mL-1 respectively was determined, with a recovery of 78 % from spiked Daphnia magna. PVP was detected in the samples above the LOD but below the LOQ. This suggests PVP is ingested by Daphnia magna, which warrants further investigation into whether bioaccumulation of PVP could be causing the sublethal effects seen in other studies.

Self-powered stable high-performance UV-Vis-NIR broadband photodetector based on PVP-Cobalt@Carbon nanofibers/n-GaAs heterojunction.

The self-powered PVP-Co@C nanofibers/n-GaAs heterojunction photodetector (HJPD) was fabricated by electrospinning of the nanofibers onto GaAs. An excellent rectification ratio of 6.60 × 106was obtained fromI-Vmeasurements of the device in the dark. TheI-Vmeasurements of the fabricated device under 365 nm, 395 nm and 850 nm lights, as well asI-Vmeasurements in visible light depending on the light intensity, were performed. The HJPD demonstrated excellent photodetection performance in terms of a good responsivity of âˆ¼225 mA W-1(at -1.72 V) and at zero bias, an impressive detectivity of 6.28 × 1012Jones, and a high on/off ratio of 8.38 × 105, all at 365 nm wavelength. In addition, the maximum external quantum efficiency and NPDR values were 3495% (V = -1.72 V) and 2.60 × 1010W-1(V= 0.0 V), respectively, while the minimum NEP value was ∼10-14W.Hz-1/2for 365 nm atV= 0.V volts. The HJPD also exhibited good long-term stability in air after 30 d without any encapsulation.

Structural, Optical and Dielectric Properties of Some Nanocomposites Derived from Copper Oxide Nanoparticles Embedded in Poly(vinylpyrrolidone) Matrix.

Polymer nanocomposite films based on poly(vinyl pyrrolidone) incorporated with different amounts of copper oxide (CuO) nanoparticles were prepared by the solution casting technique. The PVP/CuO nanocomposites were analyzed by X-ray diffractometry (XRD), scanning electron microscopy, UV-Visible absorption spectroscopy and dielectric spectroscopy. The XRD analysis showed that the monoclinic structure of cupric oxide was maintained in the PVP host matrix. The key optical parameters, such as optical energy gap Eg, Urbach energy EU, absorption coefficient and refractive index, were estimated based on the UV-Vis data. The optical characteristics of the nanocomposite films revealed that their transmittance and absorption were influenced by the addition of CuO nanoparticles in the PVP matrix. Incorporation of CuO nanoparticles into the PVP matrix led to a significant decrease in band gap energy and an increase in the refractive index. The dielectric and electrical behaviors of the PVP/CuO nanocomposites were analyzed over a frequency range between 10 Hz and 1 MHz. The effect of CuO loading on the dielectric parameters (dielectric constant and dielectric loss) of the metal oxide nanocomposites was also discussed.

Design and development of a soluble PDA-Emodin-PVP-MN patch and its anti-obesity effect in rats.

Emodin has been proven to have weight-reducing and lipid-lowering effects. In order to make emodin play a better anti-obesity role, we designed and developed an emodin loaded dissolving microneedle patch, in which emodin existed in the form of emodin-polyvinylpyrrolidone co-precipitate (Emodin-PVP). Meanwhile, polydopamine (PDA) was added to the microneedle patch (PDA-Emodin-PVP-MN) for photothermal-enhanced chemotherapy of obesity. The average weight of the patch was 0.1 ± 0.05 g and the drug loading was 0.37 ± 0.031 mg. After 5 min of NIR irradiation (808 nm, 0.6 W/cm2), the rat abdominal temperature could reach 48 ℃, and the cumulative release of emodin reached 96.25%. The diffusion coefficient of emodin in the in vitro agar diffusion experiment was 249.27 mm2 h-1. No obvious toxicity was observed in hemolysis test, CCK-8 assay and microscopic histopathological analysis. The patch significantly reduced the percent of body weight ( P < 0.01), lipid-body ratio ( P < 0.001), serum FFAs ( P < 0.01) and the cell volume of peritesticular adipose tissue in the high-fat diet induced obese rats, indicating the patch had good anti-obesity effect. The mechanism of action may be related to the up-regulation of HSL and LPL protein levels in rat peritesticular adipose tissue.

Synthesis and Reduction Processes of Silver Nanowires in a Silver(I) Sulfamate-Poly (Vinylpyrrolidone) Hydrothermal System.

Silver (Ag) nanowires, as an important one-dimensional (1D) nanomaterial, have garnered wide attention, owing to their applications in electronics, optoelectronics, sensors, and other fields. In this study, an alternative hydrothermal route was developed to synthesize Ag nanowires via modified reduction of Ag+. Silver sulfamate plays an important role in the formation of Ag nanowires via controlled release of free Ag+. Results of controlled experiments and characterizations such as UV-vis spectroscopy, FTIR, XPS, and 1H NMR revealed that sulfamic acid does not function as a reductant, supporting by the generation of free Ag+ instead of Ag nanostructures in hydrothermally treated silver sulfamate solution. The initial reduction of Ag+ was induced by the combination of poly (vinylpyrrolidone) (PVP) end group and degradation products. This phenomenon was supported by abundant free Ag+ in the mixed preheated silver sulfamatic and preheated PVP aqueous solutions, indicating a second and distinct Ag+ autocatalytic reduction. Thus, the roles of different reagents and Ag+ reduction must be studied for nanomaterial syntheses.

Fluorescence lifetime imaging and phasor analysis of intracellular porphyrinic photosensitizers applied with different polymeric formulations.

The fluorescence lifetime of a porphyrinic photosensitizer (PS) is an important parameter to assess the aggregation state of the PS even in complex biological environments. Aggregation-induced quenching of the PS can significantly reduce the yield of singlet oxygen generation and thus its efficiency as a medical drug in photodynamic therapy (PDT) of diseased tissues. Hydrophobicity and the tendency to form aggregates pose challenges on the development of efficient PSs and often require carrier systems. A systematic study was performed to probe the impact of PS structure and encapsulation into polymeric carriers on the fluorescence lifetime in solution and in the intracellular environment. Five different porphyrinic PSs including chlorin e6 (Ce6) derivatives and tetrakis(m-hydroxyphenyl)-porphyrin and -chlorin were studied in free form and combined with polyvinylpyrrolidone (PVP) or micelles composed of triblock-copolymers or Cremophor. Following incubation of HeLa cells with these systems, fluorescence lifetime imaging combined with phasor analysis and image segmentation was applied to study the lifetime distribution in the intracellular surrounding. The data suggest that for free PSs, the structure-dependent cell uptake pathways determine their state and emission lifetimes. PS localization in the plasma membrane yielded mostly monomers with long fluorescence lifetimes whereas the endocytic pathway with subsequent lysosomal deposition adds a short-lived component for hydrophilic anionic PSs. Prolonged incubation times led to increasing contributions from short-lived components that derive from aggregates mainly localized in the cytoplasm. Encapsulation of PSs into polymeric carriers led to monomerization and mostly fluorescence emission decays with long fluorescence lifetimes in solution. However, the efficiency depended on the binding strength that was most pronounced for PVP. In the cellular environment, PVP was able to maintain monomeric long-lived species over prolonged incubation times. This was most pronounced for Ce6 derivatives with a logP value around 4.5. Micellar encapsulation led to faster release of the PSs resulting in multiple components with long and short fluorescence lifetimes. The hydrophilic hardly aggregating PS exhibited a mostly stable invariant lifetime distribution over time with both carriers. The presented data are expected to contribute to optimized PDT treatment protocols and improved PS-carrier design for preventing intracellular fluorescence quenching. In conclusion, amphiphilic and concurrent hydrophobic PSs with high membrane affinity as well as strong binding to the carrier have best prospects to maintain their photophysical properties in vivo and serve thus as efficient photodynamic diagnosis and PDT drugs.

Efficacy and safety of photoselective vaporization of the prostate using the Greenlight XPS 180W laser and simple prostatectomy for high-volume prostate hypertrophy: a comparative analysis.

Introduction: This study aimed to compare the safety and efficacy of treatment using simple prostatectomy (SP) and using photoselective vaporization of the prostate (PVP) with a 180W GreenLight XPS laser in patients with high-volume prostate hypertrophy. Material and methods: The study included 120 patients with LUTS symptoms caused by prostatic enlargement of more than 80 ml; 79 patients were treated with SP, while 41 were treated with PVP. The analysis included subjective the International Prostate Symptom Score (IPSS) and Quality of Life (QoL), and objective (Qmax), (Qave), and post-void residual volume (PVR) parameters before treatment and at an average of 38 months after surgical treatment. Early and late adverse effects and length of hospitalisation were assessed. Complication reports were performed according to the modified Clavien-Dindo system. Results: The analysis independently showed the effectiveness of both methods. Subjective parameters (IPSS, QoL), showed no significant differences. Patients treated with SP scored slightly better on objective parameters (Qmax, Qave, and PVR). Analysis of adverse effects and hospitalisation time were more favourable after PVP. Conclusions: SP and PVP were found to be comparable and highly effective in treating benign prostatic hyperplasia in terms of IPSS and QoL. Patients treated with the SP method obtained slightly better results of objective parameters such as Qmax, Qave, and PVR. Compared with SP, PVP has a more favourable safety profile.

Transport and retention of functionalized graphene oxide nanoparticles in saturated/unsaturated porous media: Effects of flow velocity, ionic strength and initial particle concentration.

The widespread use of nanomaterials has raised the threat of nanoparticles (NPs) infection of soils and groundwater resources. This research aims to investigate three parameters including flow velocity, ionic strength (IS), and initial particle concentration effects on transport behavior and retention mechanism of functionalization form of graphene oxide with polyvinylpyrrolidone (GO-PVP). The transport of GO-PVP was investigated in a laboratory-scale study through saturated/unsaturated (Saturation Degree = 0.91) sand columns. Experiments were conducted on flow velocity from 1.20 to 2.04 cm min-1, initial particle concentration from 10 to 50 mg L-1, and IS of 5-20 mM. The retention of GO-PVP was best described using the one-site kinetic attachment model in HYDRUS-1D, which accounted for the time and depth-dependent retention. According to breakthrough curves (BTCs), the lower transport related to the rate of mass recovery of GO-PVP was obtained by decreasing flow velocity and initial particle concentration and increasing IS through the sand columns. Increasing IS could improve the GO-PVP retention (based on katt and Smax) in saturated/unsaturated media; katt increases from 2.81 × 10-3 to 3.54 × 10-3 s-1 and Smax increases from 0.37 to 0.42 mg g-1 in saturated/unsaturated conditions, respectively. Our findings showed that the increasing retention of GO-PVP through the sand column under unsaturated condition could be recommended for the reduction of nanoparticles danger of ecosystem exposure.

Fabrication of biodegradable and antibacterial films of chitosan/polyvinylpyrrolidone containing Eucalyptus citriodora extracts.

The main objective of this work is to develop biodegradable active films through the combination of the extracts with different solvents sourced from Eucalyptus citriodora leaves, with films made of chitosan (Cs) and polyvinylpyrrolidone (PVP). Chromatographic profiling investigations were carried out to examine the antibacterial characteristics of E. citriodora extracts before their direct incorporation into the polymer films. At this point, the potent antimicrobial properties of the phenol compounds and bioactive components demonstrated an antibacterial activity that was particularly noticeable at a hexane resolution. Different morphological characteristics were seen on films made from these solvent extracts, such as Cs/PVP-AE, Cs/PVP-EAE, and Cs/PVP-HE, when scanning electron microscopy was used. Numerous other outcomes of all the interactions between the extract particles and the film were shown by the pores defined by the Cs/PVP film's porous nature. The addition of the extracts, either alone or in combination, greatly enhanced the Cs/NC/PVP films' mechanical characteristics. It has also been shown that adding plant extracts greatly increased the antibacterial activity of these films. These findings reveal that Cs/PVP films loaded with extract may be utilized as more environmentally acceptable substitutes for possible food packaging application by increasing shelf life of food products.

An empirical predictive model for determining the aqueous solubility of BCS class IV drugs in amorphous solid dispersions.

CONTEXT: Determining solubility of drugs is laborious and time-consuming process that may not yield meaningful results. Amorphous solid dispersion (ASD) is a widely used solubility enhancement technique. Predictive models could streamline this process and accelerate the development of oral drugs with improved aqueous solubilities. OBJECTIVE: This study aimed to develop a predictive model to estimate the solubility of a compound from the ASDs in polymer matrices. METHODS: ASDs of model drugs (acetazolamide, chlorothiazide, furosemide, hydrochlorothiazide, sulfamethoxazole) with model polymers (PVP, PVPVA, HPMC E5, Soluplus) and a surfactant (TPGS) were prepared using hotmelt process. The prepared ASDs were characterized using DSC, FTIR, and XRD. The aqueous solubility of the model drugs was determined using shake-flask method. Multiple linear regression was used to develop a predictive model to determine aqueous solubility using the molecular descriptors of the drug and polymer as predictor variables. The model was validated using Leave-One-Out Cross-Validation. RESULTS: The ASDs' drug components were identified as amorphous via DSC and XRD Studies. There were no significant chemical interactions between the model drugs and the polymers based on FTIR studies. The ASDs showed a significant (p < 0.05) improvement in solubility, ranging from a 3-fold to 118-fold, compared with the pure drug. The developed empirical model predicted the solubility of the model drugs from the ASDs containing model polymer matrices with an accuracy greater than 80%. CONCLUSION: The developed empirical model demonstrated robustness and predicted the aqueous solubility of model drugs from the ASDs of model polymer matrices with an accuracy greater than 80%.

Comparison of the Clinical Outcomes of Vesselplasty vs. Percutaneous Vertebroplasty for the Treatment of Neurologically Intact Osteoporotic Kümmell's Disease: A Retrospective Study.

Kummell's disease (KD) is a rare clinical complication of osteoporotic vertebral compression fractures (OVCFs). Minimally invasive surgery is an important way to treat KD. In this paper, we used Percutaneous Vertebroplasty (PVP) and Vesselplasty (VP) to treat KD. 125 patients with KD were admitted to our hospital. Among them, 89 patients received PVP and 36 received VP. All patients underwent operations successfully. VAS scores and ODI of both groups at each postoperative time point were lower than preoperatively. Postoperative Cobb angle of both groups postoperatively was lower than preoperatively (p < 0.05). The anterior height and ratio of vertebra compression of both groups postoperatively was lower than preoperatively (p < 0.05). Cement leakage occurred in 16 vertebrae (16/89) in PVP group and one (1/36) in VP group. Two patients suffered from transient paraplegia in PVP group immediately after operation. Adjacent vertebral fractures occurred in one patient in PVP group and one in VP group. Re-fracture of affected vertebra occurred in one patient in PVP group. Besides, four patients suffered from bone cement loosening in PVP group while one in VP group. Both PVP and VP play an important effect in pain relief and functional recovery for the treatment of KD. And VP is more effective than PVP in preventing cement leakage.

Microbiome-friendly PS/PVP electrospun fibrous membrane with antibiofilm properties for dental engineering.

Dental caries is one of the most prevalent and biofilm-associated oral diseases in humans. Streptococcus mutans, with a high ability to form biofilms by adhering to hard surfaces, has been established as an important etiological agent for dental caries. Therefore, it is crucial to find a way to prevent the formation of cariogenic biofilm. Here, we report an electrospun fibrous membrane that could inhibit the adhesion and biofilm formation of S. mutans. Also, the polystyrene (PS)/polyvinyl pyrrolidone (PVP) electrospun fibrous membrane altered the 3D biofilm architecture and decreased water-insoluble extracellular polysaccharide production. Notably, the anti-adhesion mechanism which laid in Coulomb repulsion between the negatively charged PS/PVP electrospun fibrous membrane and S. mutans was detected by zeta potential. Furthermore, metagenomics sequencing analysis and CCK-8 assay indicated that PS/PVP electrospun fibrous membrane was microbiome-friendly and displayed no influence on the cell viability of human gingival epithelial cells and human oral keratinocytes. Moreover, an in vitro simulation experiment demonstrated that PS/PVP electrospun fibrous membrane could decrease colony-forming unit counts of S. mutans effectively, and PS/PVP electrospun fibrous membrane carrying calcium fluoride displayed better anti-adhesion ability than that of PS/PVP electrospun fibrous membrane alone. Collectively, this research showed that the PS/PVP electrospun fibrous membrane has potential applications in controlling and preventing dental caries.