Influencia de la capacidad manipulativa en la calidad de vida y actividades de la vida diaria en la esclerosis múltiple / Influence of manipulative skills on quality of life and activities of daily living in multiple sclerosis

Introducción: Más de un 50% de los pacientes diagnosticados con esclerosis múltiple (EM) comunican problemas con la función manipulativa e impedimentos en su vida diaria a causa de esta alteración. Por ello, el objetivo del presente estudio es determinar la afectación que la fuerza de pinza, la fuerza de presa y la destreza manipulativa ejercen sobre la calidad de vida y la autonomía personal de las personas diagnosticadas de EM, y estudiar si existe diferencia de estos aspectos entre los distintos tipos de esta enfermedad. Sujetos y métodos: Se contó con una muestra total de 126 participantes, de los cuales 57 fueron controles, y 69, casos. A todos ellos se les evaluó con el Multiple Sclerosis Quality of Life-54, el Nine-Hole Peg Test, la dinamometría de pinza y de presa para la medición de la fuerza, y el índice de Barthel para la evaluación de las actividades básicas de la vida diaria. Resultados: Las personas con EM presentaron peores fuerza de pinza, fuerza de presa, destreza manipulativa, desempeño en actividades básicas de la vida diaria y calidad de vida (p < 0,001). La fuerza de presa es un factor condicionante en el desempeño de actividades básicas y calidad de vida en personas con EM. En cuanto al tipo de EM, el tipo remitente-recurrente presentó mejores valores (p < 0,001).Conclusiones: Los hallazgos de este estudio apuntan a que los pacientes diagnosticados con EM presentan una disminución en la fuerza de pinza, la fuerza de presa, la destreza manipulativa, la calidad de vida y la autonomía en las actividades de la vida diaria en comparación con la población sana.(AU)

Introduction: More than 50% of patients diagnosed with multiple sclerosis report problems with manipulative function and impairments in their daily lives due to this disorder. Therefore, the aim of the present study is to determine how pinch strength, prey strength and manipulative dexterity affect the quality of life and personal autonomy of people diagnosed with multiple sclerosis and to study whether there is a difference in these aspects between different types of multiple sclerosis.Subjects and methods: There was a total sample of 126 participants, of which 57 were controls and 69 cases. All of them were assessed with a Multiple Sclerosis Quality of Life-54 test, Nine-Hole Peg Test and Barthel Index.Results: People with multiple sclerosis have worse pinch strength, prey strenght, manipulative dexterity, performance in basic activities of daily living and quality of life (p < 0.001). Prey strength is a conditioning factor for performance and quality of life in people with multiple sclerosis. As for the type of multiple sclerosis, relapsing-remitting multiple sclerosis presented better values (p < 0.001).Conclusions: The findings of this study point to the fact that patients diagnosed with multiple sclerosis have a decrease in prey strength, pinch strength, manipulative dexterity, quality of life and autonomy in activities of daily living compared to the healthy population.(AU)

Selective extraction and analysis of phenolic acids in herbal plants using Fe3O4@MXene@PEI aerogel.

A magnetic MXene aerogel (Fe3O4@MXene@PEI) was prepared by crosslinking amino modified MXene with polyethyleneimine using epichlorohydrin as a cross-linker. Adsorption properties of Fe3O4@MXene@PEI aerogel for phenolic acids were evaluated by adsorption kinetics and isotherms experiments, showing that the high adsorption affinity was governed by multilayer chemisorption process. An efficient MSPE/HPLC method was developed for the determination of phenolic acids with excellent selectivity, good linearity (0.025-5.0 µg mL-1), low LODs (0.007-0.017 µg mL-1), and satisfactory recoveries (80.0-120.0 %). Moreover, the antioxidant activity of the Fe3O4@MXene@PEI purified compounds was superior to that of the conventional method as demonstrated by the results of scavenging experiments on 2,2 -diphenyl-1-picrylhydrazyl radical scavenging assay. Finally, 65 organic acids were identified in the Fe3O4@MXene@PEI treated honeysuckle extracts by UHPLC-Q-Exactive Orbitrap MS/MS analysis. The proposed sorbent exhibits remarkable promise for the selective separation and purification of organic acids from herbal products.

Effects of immersing Japanese quail eggs in various doses of riboflavin on reproductive, growth performance traits, blood indices and economics.

This investigation aimed to evaluate the impact of immersion (IM) riboflavin treatment on the hatchability, production efficiency, and carcass characteristics of Japanese quail eggs. A total of 260 eggs of Japanese quail birds were used for hatching and were randomly divided into 4 treatments with 5 replicates (13 eggs/replicate) in a fully randomized design. Hatching eggs were immersed in riboflavin for 2 min before incubation. The experiment treatments were designed as follows: G1 control group with no treatment, G2 treated with 3 g/L vit. B2 (IM), G3 treated with 4 g/L vit. B2 (IM) and G4 were treated with 5 g/L vit. B2 (IM). After hatching, 128 Japanese quail chicks, aged 7 d, were randomly grouped into 4 treatment groups, with 32 birds in each group. When quails were given vitamin B2 via immersion, they demonstrated significant enhancements in live body weight, body weight gain, feed consumption, and feed conversion ratio at different stages compared to the control group. Compared to control and other groups, the carcass parameters of Japanese quails given a 4 g/L immersion solution showed a significant improvement (P < 0.05). Hatchability and fertility (%) were considerably raised by Vit.B2 treatments of 3, 4, and 5g; the group immersed in 5 g/L had the highest percentages compared to the other groups. Furthermore, treated chickens with all concentrations of vitamin B2 had significantly higher blood indices than the controls. During the exploratory phase (1-6 wk) of age, the highest returns were reported in G4 treated with 5g/L vit. B2 (IM). Treating Japanese quail eggs with different dosages of vitamin B2 by immersion may be recommended to improve their productive and reproductive performance, blood indices, carcass traits, and economic efficiency.

Relative pedaling forces are low during cycling.

We quantified and compared the mechanical force demands relative to the maximum dynamic force (MDF) of 11 cyclists when pedaling at different intensities (ventilatory threshold, maximum lactate steady state, respiratory compensation point, and maximal aerobic power), cadences (free, 40, 60 and 80 rpm), and all-out resisted sprints. Relative force demands (expressed as %MDF) progressively increased with higher intensities (p < 0.001) and lower cadences (p < 0.001). Notwithstanding, relative force demands were low (<54 % MDF) for all conditions, even during the so-called 'torque training'. These results might be useful when programming on-bike resistance training to improve torque production capacity.

[Determination of six bisphenols in human urine by ultra-high performance liquid chromatography-tandem mass spectrometry].

OBJECTIVE: To develop and validate a solid phase extraction-ultra-high performance liquid chromatography-tandem mass spectrometry method for the determination of six bisphenols(bisphenol S, bisphenol F, bisphenol A, 2, 2'-methylenediphenol, bisphenol AF, bisphenol AP) in urine. METHODS: After enzymolysis of urine sample, the target substances were quickly purified and extracted by WAX solid phase extraction column. On ACQUITY BEH C_(18) column(2.1 mm×100 mm, 1.7 µm), the mobile phase of water and methanol was used to separate. Finally, multi-reaction detection was carried out under electrospray negative ion scanning, and quantification was carried out by internal standard method. RESULTS: The correlation coefficients(r) of the target compounds were all more than 0.998 in the range of 0.1-50.0 ng/mL, the linearity was good, and the detection limits were all lower than 0.1 ng/mL. The recoveries of the three standard concentrations(0.5, 5.0 and 50.0 ng/mL) were all between 80% and 120%, and the relative standard deviation was less than 20%(n=5). The standard reference material was detected and the concentration was within the reference range. CONCLUSION: This method can be used to detect six bisphenols in urine quickly and accurately, is suitable for the trace analysis of bisphenol compounds in human urine.

Improved industrial induction time-based technique for evaluating kinetic hydrate inhibitors.

Kinetic hydrate inhibitor laboratory testing before field application is one of the key priorities in the oil and gas industry. The common induction-time-based technique is often used to evaluate and screen for kinetic hydrate inhibitors (KHIs). However, the main challenge relates to the stochastic nature of hydrate nucleation observed in fresh systems, which often results in scattered data on hydrate formation with unacceptable uncertainties. A much more precise KHI evaluation method, called crystal growth inhibition (CGI), provides comprehensive insights into the inhibitory behavior of a kinetic hydrate inhibitor, including both hydrate formation and decomposition. Given that industry does not require this much information, it is not feasible to expend either much time or cash on this strategy. This study aims to provide a cost-effective technique that presents maximum data accuracy and precision with relatively little time and cost expenditure. Hence, the impact of water-hydrate memory on improving the accuracy and repeatability of the results of the induction-time-based technique (IT method) was examined. First, the concept of water-hydrate memory, which contains information about how it is created, was reviewed, and then, the factors influencing it were identified and experimentally investigated, like the heating rate of hydrate dissociation and the water-hydrate memory target temperature during heating. Finally, a procedure was developed based on the background information in the earlier sections to compare the consistency of the results, originating from the conjunction of water-hydrate memory with the IT technique. The results of replications at KHI evaluation target temperatures of 12.3-12.4°C and 11.5-11.7°C showed that more repeatable data were obtained by applying water-hydrate memory, and a more conclusive decision was made in evaluating KHI performance than with an IT method. It seems that combining the IT method with water-hydrate memory, introduced as the "HME method", can lead to more definitive evaluations of KHIs. This approach is expected to gain in popularity, even surpassing the accurate but complex and time-consuming CGI method.

Yield stability among potato varieties suitable for different agroecological regions of Bangladesh.

Multilocation trials are usually performed in breeding and variety evaluation programs to identify stable genotype(s) with similar crop performance in various environments. The present study evaluated the stability of six selected potato varieties (BARI Alu-7, BARI Alu-8, BARI Alu-25, BARI Alu-28, BARI Alu-36, and BARI Alu-41) suitable for multiple locations (Barishal, Bogura, Cumilla, Jamalpur, Jashore, Munshiganj, Mymensingh, and Rajshahi) in Bangladesh from 2014 to 2019. The study considered genotype and environment as treatments, year as replications and used a randomized complete block design (RCBD) with to construct the genotype plus genotype-vs-environment interaction (GGE) model. The joint analysis of variance revealed significant differences among the genotypes and environments (GE). The scores of PC1 (principal component 1) and PC2 (principal component 2) cumulatively explained approximately 63 % of the total variation in GE interactions and were used to construct the GGE biplot. BARI Alu-8 and BARI Alu-28 were the best genotypes, with high average yields and high stability across the locations. Jamalpur and Munshiganj was identified as the desired locations among the tested environments for growing all the genotypes. This study will help potato growers select highly stable high-performance varieties for a particular environment to achieve maximum tuber production.

Coronary circulation enhances the aerobic performance of wild Pacific salmon.

Female Pacific salmon often experience higher mortality than males during their once-in-a-lifetime up-river spawning migration, particularly when exposed to secondary stressors (e.g. high temperatures). However, the underlying mechanisms remain unknown. One hypothesis is that female Pacific salmon hearts are more oxygen-limited than males and are less able to supply oxygen to the body's tissues during this demanding migration. Notably, female hearts have higher coronary blood flow, which could indicate a greater reliance on this oxygen source. Oxygen limitations can develop from naturally occurring coronary blockages (i.e., coronary arteriosclerosis) found in mature salmon hearts. If female hearts rely more heavily on coronary blood flow but experience similar arteriosclerosis levels as males, they will have disproportionately impaired aerobic performance. To test this hypothesis, we measured resting (RMR) and maximum metabolic rate (MMR), aerobic scope (AS) and acute upper thermal tolerance in coho salmon (Oncorhynchus kisutch) with an intact or artificially blocked coronary oxygen supply. We also assessed venous blood oxygen and chemistry (cortisol, ions, and metabolite concentrations) at different time intervals during recovery from exhaustive exercise. We found that coronary blockage impaired MMR, AS, and the partial pressure of oxygen in venous blood (PvO2) during exercise recovery but did not differ between sexes. Coronary ligation lowered acute upper thermal tolerance by 1.1°C. Though we did not find evidence of enhanced female reliance on coronary supply, our findings highlight the importance of coronary blood supply for mature wild salmon, where migration success may be linked to cardiac performance, particularly during warm water conditions.

Door-to-Needle Time for Extracorporeal Cardiopulmonary Resuscitation and Neurological Outcomes in Out-of-Hospital Cardiac Arrest: A Nationwide Study.

BACKGROUND: Extracorporeal cardiopulmonary resuscitation (ECPR) is an option for refractory cardiac arrest, and immediate initiation after indication is recommended. However, the practical goals of ECPR preparation (such as the door-to-needle time) remain unclear. This study aimed to elucidate the association between the door-to-needle time and neurological outcomes of out-of-hospital cardiac arrest. METHODS AND RESULTS: This is a post hoc analysis of a nationwide multicenter study on out-of-hospital cardiac arrest treated with ECPR at 36 institutions between 2013 and 2018 (SAVE-J [Study of Advanced Cardiac Life Support for Ventricular Fibrillation with Extracorporeal Circulation in Japan] II study). Adult patients without hypothermia (≥32 °C) in whom circulation was not returned at ECPR initiation were included. The probability of favorable neurological function at 30 days (defined as Cerebral Performance Category ≤2) was estimated using a generalized estimating equations model, in which institutional, patient, and treatment characteristics were adjusted. Estimated probabilities were then calculated according to the door-to-needle time with 3-minute increments, and a clinical threshold was assumed. Among 1298 patients eligible for this study, 136 (10.6%) had favorable neurological function. The estimated probability of favorable outcomes was highest in patients with 1 to 3 minutes of door-to-needle time (12.9% [11.4%-14.3%]) and remained at 9% to 10% until 27 to 30 minutes. Then, the probability dropped gradually with each 3-minute delay. A 30-minute threshold was assumed, and shorter door-to-extracorporeal membrane oxygenation/low-flow time and fewer adverse events related to cannulation were observed in patients with door-to-needle time <30 minutes. CONCLUSIONS: The probability of favorable functions after out-of-hospital cardiac arrest decreased as the door-to-needle time for ECPR was prolonged, with a rapid decline after 27 to 30 minutes. REGISTRATION: URL: https://center6.umin.ac.jp/cgi-open-bin/ctr/ctr_view.cgi?recptno=R000041577; Unique identifier: UMIN000036490.

Effects of acute simulated altitude on the maximal lactate steady state in humans.

We sought to determine the effects of acute simulated altitude on the maximal lactate steady state (MLSS) and physiological responses to cycling at and 10 W above the MLSS-associated power output (PO) (MLSSp and MLSSp+10, respectively). Eleven (4 female) participants (mean [SD]; 28 [4] years; V̇O2max: 54.3 [6.9] mL×kg-1×min-1) acclimatized to ~1100 m performed 30-min constant PO trials in simulated altitudes of 0 m (SL), 1111 m (MILD), and 2222 m (MOD). MLSSp, defined as the highest PO with stable (<1mM change) blood lactate concentration ([BLa]) between 10 and 30 min, was significantly lower in MOD (209 [54] W) compared to SL (230 [56] W; p<0.001) and MILD (225 [58] W; p=0.001), but MILD and SL were not different (p=0.12). V̇O2 and V̇CO2 decreased at higher simulated altitudes due to lower POs (p<0.05), but other end-exercise physiological responses (e.g., [BLa], ventilation (V̇E), heart rate (HR)) were not different between conditions at MLSSp or MLSSp+10 (p>0.05). At the same absolute intensity (MLSSp for MILD), [BLa], HR, and V̇E and all perceptual variables were exacerbated in MOD compared to SL and MILD (p<0.05). Maximum voluntary contraction, voluntary activation, and potentiated twitch forces were exacerbated at MLSSp+10 relative to MLSSp within conditions (p<0.05); however, condition did not affect performance fatiguability at the same relative or absolute intensity (p>0.05). As MLSSp decreased in hypoxia, adjustments in PO are needed to ensure the same relative intensity across altitudes, but common indices of exercise intensity may facilitate exercise prescription and monitoring in hypoxia.

Nutritional synergy: optimizing growth in Siruvidai chicken via diverse dietary energy and protein strategies and gene expression analysis - brooder phase.

Nutrient supply regulates overall body growth directly or indirectly through its influence on regulatory factors optimizing nutrient requirements becomes crucial before embarking on genetic improvements. Hence this study addresses this gap by evaluating the effect of feeding varying energy and crude protein levels on growth performance and gene expression related to the growth of indigenous Siruvidai chicken from 0 to 12 weeks. A 360-day-old straight-run Siruvidai chick were randomly distributed into six experimental groups with three replicates of each 20 chicks. The birds were fed corn-soy-based diets formulated with two levels of energy (2500 and 2700 kcal ME/kg) each with three levels of crude protein (16, 18, and 20%) during the brooder stage (0-12 weeks) in 2 × 3 factorial design. Results revealed that there was no significant effect on the energy and protein interaction levels on average feed intake, body weight gain and feed conversion ratio in Siruvidai chicken at 12 weeks. The results showed significantly (P < 0.05) lower feed intake in 18% protein fed groups and significantly (P < 0.01) lower feed intake in higher energy 2700 kcal ME/kg fed groups. A better feed conversion ratio (4.06 and 4.21) was observed on the effect of protein levels in bird diets with 18% and 20% protein fed groups. The Growth Hormone (GH) and Myostatin (MSTN) gene expression were significantly (P < 0.01) higher in 16% CP and 2500 kcal ME/kg in hepatic tissue. The high protein and low energy diet up-regulated the Insulin-like Growth Factor-1 (IGF-1) gene expression in hepatic tissue. The study concluded that Siruvidai chicken fed with 18% crude protein and 2500 kcal ME/kg is optimum for 0-12 weeks of age.

Lean methane combustion over zeolite-supported Pd catalysts: Structure-performance relationship and deactivation mechanism.

Zeolites are a promising support for Pd catalysts in lean methane (CH4) combustion. Herein, three types of zeolites (H-MOR, H-ZSM-5 and H-Y) were selected to estimate their structural effects and deactivation mechanisms in CH4 combustion. We show that variations in zeolite structure and surface acidity led to distinct changes in Pd states. Pd/H-MOR with external high-dispersing Pd nanoparticles exhibited the best apparent activity, with activation energy (Ea) at 73 kJ/mol, while Pd/H-ZSM-5 displayed the highest turnover frequency (TOF) at 19.6 × 10-3 sec-1, presumably owing to its large particles with more step sites providing active sites in one particle for CH4 activation. Pd/H-Y with dispersed PdO within pore channels and/or Pd2+ ions on ion-exchange sites yielded the lowest apparent activity and TOF. Furthermore, Pd/H-MOR and Pd/H-ZSM-5 were both stable under a dry condition, but introducing 3 vol.% H2O caused the CH4 conversion rate on Pd/H-MOR drop from 100% to 63% and that on Pd/H-ZSM-5 decreased remarkably from 82% to 36%. The former was shown to originate from zeolite structural dealumination, and the latter principally owed to Pd aggregation and the loss of active PdO.

Surface Engineering of Cathode Materials: Enhancing the High Performance of Lithium-Ion Batteries.

The development and application of lithium-ion batteries present a dual global prospect of opportunity and challenge. With conventional energy sources facing reserve shortages and environmental issues, lithium-ion batteries have emerged as a transformative technology over the past decade, owing to their superior properties. They are poised for exponential growth in the realms of electric vehicles and energy storage. The cathode, a vital component of lithium-ion batteries, undergoes chemical and electrochemical reactions at its surface that directly impact the battery's energy density, lifespan, power output, and safety. Despite the increasing energy density of lithium-ion batteries, their cathodes commonly encounter surface-side reactions with the electrolyte and exhibit low conductivity, which hinder their utility in high-power and energy-storage applications. Surface engineering has emerged as a compelling strategy to address these challenges. This paper meticulously examines the principles and progress of surface engineering for cathode materials, providing insights into its potential advancements and charting its development trajectory for practical implementation.

Cyclic Ether Derived Stable Solid Electrolyte Interphase on Bismuth Anodes for Ultrahigh-Rate Sodium-Ion Storage.

The bismuth anode has garnered significant attention due to its high theoretical Na-storage capacity (386 mAh g-1). There have been numerous research reports on the stable solid electrolyte interphase (SEI) facilitated by electrolytes utilizing ether solvents. In this contribution, cyclic tetrahydrofuran (THF) and 2-methyltetrahydrofuran (MeTHF) ethers are employed as solvents to investigate the sodium-ion storage properties of bismuth anodes. A series of detailed characterizations are utilized to analyze the impact of electrolyte solvation structure and SEI chemical composition on the kinetics of sodium-ion storage. The findings reveal that bismuth anodes in both THF and MeTHF-based electrolytes exhibit exceptional rate performance at low current densities, but in THF-based electrolytes, the reversible capacity is higher at high current densities (316.7 mAh g-1 in THF compared to 9.7 mAh g-1 in MeTHF at 50 A g-1). This stark difference is attributed to the formation of an inorganic-rich, thin, and uniform SEI derived from THF-based electrolyte. Although the SEI derived from MeTHF-based electrolyte also consists predominantly of inorganic components, it is thicker and contains more organic species compared to the THF-derived SEI, impeding charge transfer and ion diffusion. This study offers valuable insights into the utilization of cyclic ether electrolytes for Na-ion batteries.

Synergistic Effect of In2O3/NC-Co3O4 Interface on Enhancing the Redox Conversion of Polysulfides for High-Performance Li-S Cathode Materials at Low Temperatures.

Lithium-sulfur (Li-S) batteries are considered as a promising energy storage technology due to their high energy density; however, the shuttling effect and sluggish redox kinetics of lithium polysulfides (LiPSs) severely deteriorate the electrochemical performance of Li-S batteries. Herein, we report a novel configuration wherein In2O3 and Co3O4 are incorporated into N-doped porous carbon as a sulfur host material (In2O3@NC-Co3O4) using metal-organic framework-based materials to synergistically tune the catalytic abilities of different metal oxides for different reaction stages of LiPSs, achieving a rapid redox conversion of LiPSs. In particular, the introduction of N-doped carbon improved the electron transport of the materials. The polar interface of In2O3 and Co3O4 anchors both long- and short-chain LiPSs and catalyzes long-chain and short-chain LiPSs, respectively, even at low temperatures. Consequently, the Li-S battery with In2O3@NC-Co3O4 cathode materials delivered an excellent discharge capacity of 1042.4 mAh g-1 at 1 C and a high capacity retention of 85.1% after 500 cycles. Impressively, the In2O3@NC-Co3O4 cathode displays superior performances at high current density and low temperature due to the enhanced redox kinetics, delivering 756 mAh g-1 at 2 C (room temperature) and 755 mAh g-1 at 0.1 C (-20 °C).

Thirty-second chair stand test in older adults with chronic health conditions is associated with lower limb oxygen extraction capacity.

BACKGROUND: The 30-s chair stand test (CS-30) is a well-known measure of muscle strength in older adults. However, factors other than muscle strength may also be involved in older adults with chronic health conditions who require support and care in daily living. PURPOSE: To test the hypothesis that the CS-30 in older adults with chronic health conditions is associated with lower limb muscle oxygen extraction capacity. METHODS: Twenty-seven older adults with chronic health conditions (those who needed support and care in daily living because of stroke, musculoskeletal disease, etc.) were recruited. Tissue and percutaneous oxygen saturations of the right vastus lateralis muscle were measured during CS-30 measurements, and muscle oxygen extraction rate (MOER) was calculated. Knee extension strength, skeletal muscle mass index (SMI), and phase angle (PhA) were measured. In a multiple regression analysis with CS-30 as the dependent variable, results were calculated for model 1 with SMI, PhA, and ΔMOER as independent variables and model 2 with knee extension muscle strength added to model 1. RESULTS: Phase angle (model 1, ß = 0.46, p = .014; model 2, ß = 0.46, p = .016) and ΔMOER (model 1, ß = 0.39, p = .032; model 2, ß = 0.40, p = .039) were significantly associated in both models. Adjusted R2 was 0.26 (Model 1) and 0.23 (Model 2). CONCLUSION: The CS-30 in older adults with chronic health conditions may be related to muscle oxygen extraction capacity. This indicates that CS-30 also considers lower limb endurance assessment in this population.

The endophytic fungus Serendipita indica affects auxin distribution in Arabidopsis thaliana roots through alteration of auxin transport and conjugation to promote plant growth.

Plants share their habitats with a multitude of different microbes. This close vicinity promoted the evolution of interorganismic interactions between plants and many different microorganisms that provide mutual growth benefits both to the plant and the microbial partner. The symbiosis of Arabidopsis thaliana with the beneficial root colonizing endophyte Serendipita indica represents a well-studied system. Colonization of Arabidopsis roots with S. indica promotes plant growth and stress tolerance of the host plant. However, until now, the molecular mechanism by which S. indica reprograms plant growth remains largely unknown. This study used comprehensive transcriptomics, metabolomics, reverse genetics, and life cell imaging to reveal the intricacies of auxin-related processes that affect root growth in the symbiosis between A. thaliana and S. indica. Our experiments revealed the sustained stimulation of auxin signalling in fungus infected Arabidopsis roots and disclosed the essential role of tightly controlled auxin conjugation in the plant-fungus interaction. It particularly highlighted the importance of two GRETCHEN HAGEN 3 (GH3) genes, GH3.5 and GH3.17, for the fungus infection-triggered stimulation of biomass production, thus broadening our knowledge about the function of GH3s in plants. Furthermore, we provide evidence for the transcriptional alteration of the PIN2 auxin transporter gene in roots of Arabidopsis seedlings infected with S. indica and demonstrate that this transcriptional adjustment affects auxin signalling in roots, which results in increased plant growth.

Effect of processing speed and memory performance on classification accuracy of the dot counting test in a mixed neuropsychiatric sample.

OBJECTIVE: This study examined the impact of impairment in two specific cognitive abilities, processing speed and memory, on Dot Counting Test (DCT) classification accuracy by evaluating performance validity classification accuracy across cognitively unimpaired, single-domain impairment, and multidomain impairment subgroups within a mixed clinical sample. METHOD: Cross-sectional data were analyzed from 348 adult outpatients classified as valid (n = 284) or invalid (n = 64) based on four independent criterion performance validity tests (PVTs). Unimpaired (n = 164), single-domain processing speed impairment (n = 24), single-domain memory impairment (n = 53), and multidomain processing speed and memory impairment (n = 43) clinical subgroups were established among the valid group. Both the traditional DCT E-score and unrounded E-score were examined. RESULTS: Overall, the DCT demonstrated acceptable to excellent classification accuracy across the unimpaired (area under the curve [AUC] traditional E-score=.855; unrounded E-score=.855) and single-domain impairment groups (traditional E-score AUCs = .690-.754; unrounded E-score AUCs = .692-747). However, it did not reliably discriminate the multidomain processing speed and memory impairment group from the invalid performers (traditional and unrounded E-scores AUC = .557). CONCLUSIONS: Findings support the DCT as a non-memory-based freestanding PVT for use with single-domain cognitive impairment, with traditional E-score ≥17 (unrounded E-score ≥16.95) recommended for those with memory impairment and traditional E-score ≥19 (unrounded ≥18.08) with processing speed impairment. Moreover, results replicated previously established optimal cutoffs for unimpaired groups using both the traditional (≥14) and unrounded (≥13.84) E-scores. However, the DCT did not reliably discriminate between invalid performance and multidomain cognitive impairment, indicating caution is warranted when using the DCT with patients suspected of greater cognitive impairment.

Evaluation of using micronized saudi calcite in ilmenite-weighted water-based drilling fluid.

A high-density water-based drilling fluid (WBDF) is crucial for maintaining wellbore stability, controlling formation pressures, and optimizing drilling performance in challenging subsurface conditions. In the present research, the effect of micronized calcium carbonate (calcite), extracted from the Aruma formation outcrop, is evaluated as one of the additives that could be added to the ilmenite-weighted WBDF to enhance and optimize its properties. Various concentrations of Calcite microparticles were introduced into identical fluid formulations to assess their impact. The concentrations ranged from 0, 10, 20, to 30 lb/bbl, providing a comprehensive examination of the effects of calcite microparticles across a spectrum of concentrations within the fluid. The results highlighted that adding Barite microparticles to the WBDF revealed a notable enhancement in rheological properties. Specifically, the yield point demonstrated an increase of 37%, 37%, and 11% for concentrations of 10, 20, and 30 lb/bbl of calcite, respectively. Equally significant, high-pressure-high-temperature (HPHT) filtration analysis indicated a considerable enhancement for the fluids containing calcite microparticles. A reduction of 14.5%, 24.6%, and 13% were observed in HPHT filtrate for concentrations of 10 lb/bbl, 20 lb/bbl, and 30 lb/bbl respectively. Simultaneously, there is a reduction in filter cake thickness by 20%, 40%, and 20%, respectively. No ilmenite settling was observed in the sample containing 20 lb/bbl of calcite, unlike the other concentrations. These diverse results strongly suggest that the optimal concentration for calcite microparticles is 20 lb/bbl. The combined utilization of the optimal concentration of calcite microparticles alongside the established additives proves to be an effective strategy for optimizing the ilmenite-weighted WBDF performance in terms of both thermal stability and rheological behavior.