Benzotriazole ultraviolet absorbents in surface waters and sediments of the Bohai Sea and North Yellow Sea: Spatial trends and influencing factors.

Benzotriazole ultraviolet absorbents (BUAs) of emerging concern were recently monitored in seawater and sediments from the Bohai Sea (BS) and North Yellow Sea (NYS), which are impacted by human activities, to elucidate their regional occurrence patterns, phase distributions, and contamination profiles. Although environmental variables such as sedimentary organic carbon, particle size, and salinity, as well as hydrological conditions, affected the environmental occurrence of BUAs in the BS and NYS, the source dependence of BUA distributions associated with urban impacts and riverine inputs was highlighted. Substantial spatial variability in the composition patterns and contamination profiles of BUAs identified through correlation and principal component analyses were likely caused by region-specific sources and characteristics. The distribution of target BUAs between the sediment and seawater phases showed no dependence on the octanol-water partition coefficient (KOW) but exhibited marked spatial variations. The diversity of BUA sorption behaviors was further explained by the total organic carbon (TOC)-normalized distribution coefficient (KTOC). Classic logKTOC-logKOW linear relationships accurately predicted the phase distributions of UV-326, UV-328, and UV-234, but deviations were found for lighter and heavier BUAs, possibly due to the influences of physical disturbance and microparticle binding.

Partitioning purification, biochemical characterization, and milk coagulation efficiency of protease from a newly Streptomyces sp. isolate.

An actinobacteria strain was isolated from an olive waste mill and tested for protease production on skimmed milk media. The strain identification was achieved through both 16 S rDNA sequencing and phenotypic characterization. The enzyme was purified using the ammonium sulfate/t-butanol three-phase partitioning (TPP) method, followed by characterization to investigate the effect of pH, temperature, and various chemical agents. Subsequently, the enzyme was assessed for its milk coagulation activity. The strain belonging to the Streptomyces genera, exhibits significant phylogenetic and phenotypic differences from the aligned species, suggesting its novelty as a new strain. The enzyme was best separated in the TPP aqueous phase with a 5.35 fold and 56.25% yield. Optimal activity was observed at pH 9.0 and 60 °C, with more than half of the activity retained within the pH range of 7-10 over one hour. The protease demonstrated complete stability between 30 and 60 °C. While metallic ions enhanced enzyme activity, EDTA acted as an inhibitor. The enzyme displayed resistance to H2O2, SDS, Tween 80, and Triton X-100. Notably, it was activated in organic solvents (ethyl acetate, petroleum ether, and xylene), maintaining > 75% of its original activity in butanol, ethanol, and methanol. Additionally, the enzyme yielded high milk coagulant activity of 11,478 SU/mL. The new Streptomyces sp. protease revealed high activity and stability under a wide range of biochemical conditions. Its use in the dairy industry appears particularly promising. Further industrial process investigations will be valuable in determining potential uses for this enzyme.

Characterization of the Structure and Physicochemical Properties of Soluble Dietary Fiber from Peanut Shells Prepared by Pulsed Electric Fields with Three-Phase Partitioning.

This study evaluated the impact of pulsed electric fields (PEFs) combined with three-phase partitioning (TPP) extraction methods on the physicochemical properties, functional properties, and structural characterization of the soluble dietary fiber (SDF) derived from peanut shells (PS). The findings of this study indicated that the application of a PEF-TPP treatment leads to a notable improvement in both the extraction yield and purity of SDF. Consequently, the PEF-TPP treatment resulted in the formation of more intricate and permeable structures, a decrease in molecular weight, and an increase in thermal stability compared to SDFs without TPP treatment. An analysis revealed that the PEF-TPP method resulted in an increase in the levels of arabinose and galacturonic acid, leading to enhanced antioxidant capacities. Specifically, the IC50 values were lower in SDFs which underwent PEF-TPP (4.42 for DPPH and 5.07 mg/mL for ABTS) compared to those precipitated with 40% alcohol (5.54 mg/mL for DPPH, 5.56 mg/mL for ABTS) and PEF75 (6.60 mg/mL for DPPH, 7.61 mg/mL for ABTS), respectively. Notably, the SDFs which underwent PEF-TPP demonstrated the highest water- and oil-holding capacity, swelling capacity, emulsifying activity, emulsion stability, glucose adsorption, pancreatic lipase inhibition, cholesterol adsorption, nitric ion adsorption capacity, and the least gelation concentration. Based on the synthesis scores obtained through PCA (0.536 > -0.030 > -0.33), which indicated that SDFs which underwent PEF-TPP exhibited the highest level of quality, the findings indicate that PEF-TPP exhibits potential and promise as a method for preparing SDFs.

Nitroaromatic compounds in six major Chinese cities: Influence of different formation mechanisms on light absorption properties.

Nitroaromatic compounds (NACs) are important nitrogen organics in aerosol with strong light-absorbing and chemically reactive properties. In this study, NACs in six Chinese megacities, including Harbin (HB), Beijing (BJ), Xi'an (XA), Wuhan (WH), Chengdu (CD), and Guangzhou (GZ), were investigated for understanding their sources, gas-particle partitioning, and impact on BrC absorption properties. The concentrations of ΣNACs in PM2.5 in the six cities ranged from 9.15 to 158.8 ng/m3 in winter and from 2.02 to 9.39 ng/m3 in summer. Nitro catechols (NCs), nitro phenols (NPs), and nitro salicylic acids (NSAs) are the main components in ΣNACs, with NCs being dominant in particulate phase and NPs being dominant in the gas phase. Correlation analysis between different pollutant species revealed that coal and biomass combustions were the major sources of NACs in the northern cities during wintertime, while secondary formation dominated NACs in the southern cities during summertime. The contribution of ΣNACs to brown carbon (BrC) light absorption ranged from 0.85 to 7.98 % during the wintertime and 2.07-6.44 % during the summertime. The mass absorption efficiency at 365 nm (MAE365) were highest for 4-nitrocatechol (4NC, 17.4-89.0 m2/g), 4-methyl-5-nitrocatechol (4M5NC, 15.0-76.9 m2/g), and 4-nitroguaiacol (4NG, 11.7-59.8 m2/g). The formation of NCs and NG through oxidation and nitration of catechol and guaiacol led to a significant increase in aerosol light absorption. In contrast, NPs and NSAs formed by the photonitration and photooxidation in liquid phase showed high polarity but low light absorption ability, and the proportions of (NPs + NSAs) in the light absorption of ΣNACs were lower than 15.3 % in the six megacities.

Structural Elucidation of a Polysaccharide from Flammulina velutipes and Its Lipid-Lowering and Immunomodulation Activities.

FVPT1, a novel heteropolysaccharide, was purified from the fruiting body of Flammulina velutipes using magnetic-field-assisted three-phase partitioning and gel permeation chromatography. The structure was characterized using monosaccharide composition and methylation analysis, infrared spectroscopy and nuclear magnetic resonance (NMR). The FVPT1 (~1.64 × 104 Da) was composed of L-fucose, D-galactose, D-glucose and D-mannose at a molar ratio of 1.0:3.5:1.0:1.4. The polysaccharide repeating unit of FVPT1 was established with methylation analyses and NMR spectroscopy. Moreover, a zebrafish larva hyperlipidemia model test demonstrated that FVPT1 can show appreciable lipid-lowering effects. In addition, the FVPT1 exhibited remarkable immunoregulatory activity by increasing nitric oxide, interleukin (IL)-1ß and IL-1 secretion in macrophages. Therefore, these results suggest that FVPT1 has the potential to be developed into a new immune or hypolipidemic health product.

Techno-environmental and economic assessment of color removal strategies from textile wastewater.

The textile industry is one of the most chemical-intensive processes, resulting in the unquestionable pollution of more than a quarter of the planet's water bodies. The high recalcitrant properties of some these pollutants resulted on the development of treatment technologies looking at the larger removal efficiencies, due to conventional systems are not able to completely remove them in their effluents. However, safeguarding the environment also implies taking into account indirect pollution from the use of chemicals and energy during treatment. On the other hand, the emerged technologies need to be economically attractive for investors and treatment managers. Therefore, the costs should be kept under control. For this reason, the present study focuses on a comparative Life Cycle Assessment and Life Cycle Costing of four scale-up scenarios aiming at mono and di-azo reactive dyes removal from textile wastewater. Two reactors (sequencing batch reactor and two-phase partitioning) were compared for different reaction environments (i.e., single anaerobic and sequential anaerobic-aerobic) and conditions (different pH, organic loading rates and use of polymer). In accordance with the results of each scenario, it was found that the three technical parameters leading to a change in the environmental profiles were the removal efficiency of the dyes, the type of dye eliminated, and the pollutant influent concentration. The limitation of increasing organic loading rates related to the biomass inhibition could be overcame through the use of a novel two-phased partitioning bioreactor. The use of a polymer at this type of system may help restore the technical performance (84.5 %), reducing the toxic effects of effluents and consequently decreasing the environmental impact. In terms of environmental impact, this is resulting into a reduction of the toxic effects of textile effluents in surface and marine waters compared to the homologous anaerobic-aerobic treatment in a sequencing batch reactor. However, the benefits achieved for the nature comes with an economic burden related to the consumption of the polymer. It is expected that the cost of investment of the treatment with the two-phase partitioning bioreactor rises 0.6-8.3 %, depending on market prices, compared to the other analyzed sequential anaerobic-aerobic technologies. On the other side, energy and chemical consumption did not prove to be limiting factors for economic feasibility.

Extraction of Ampelopsis japonica polysaccharides using p-toluenesulfonic acid assisted n-butanol three-phase partitioning: Physicochemical, rheological characterization and antioxidant activity.

Polysaccharides as the biopolymers are showing various structural and modulatory functions. Effective separation of carbohydrate structures is essential to understanding their function. In this study, we choose an efficient organic acid in combination with recyclable organic solvent three-phase partitioning technology for the simultaneous extraction of polysaccharides from Ampelopsis japonica (AJPs) to ensure the integrity of linear and branched polysaccharide. The monosaccharide composition, glycosidic linkage information, structural and physicochemical analyses and associations with antioxidant activities were extensively analyzed. Synergistic extraction was compared with the conventional hot water extraction method and the results showed that AJPs-HNP exhibited better elastic properties and excellent antioxidant activity. Correlation analysis confirmed that the antioxidant activity of AJPs was significantly correlated with relative molecular weight, uronic acid content and terminal glycoside linkage molar ratios. The collaborative processing has significantly improved the utilization potential of AJPs and provides a sound theoretical foundation for the effective extraction and separation of polysaccharides. Overall, this work provides systematic and comprehensive scientific information on the physicochemical, rheological and antioxidant properties of AJPs, revealing their potential as natural antioxidants in the functional food and pharmaceutical industries.

Purification and characterization of a new trypsin-like protease from Crotalaria stipularia.

Proteases are the main enzymes traded worldwide-comprising 60% of the total enzyme market-and are fundamental to the degradation and processing of proteins and peptides. Due to their high commercial demand and biological importance, there is a search for alternative sources of these enzymes. Crotalaria stipularia is highlighted for its agroecological applications, including organic fertilizers, nematode combat, and revegetation of areas contaminated with toxic substances. Considering the pronounced biotechnological functionality of the studied species and the necessity to discover alternative sources of proteases, we investigated the extraction, purification, and characterization of a protease from seeds of the C. stipularia plant. Protease isolation was achieved by three-phase partitioning and single-step molecular exclusion chromatography in Sephacryl S-100, with a final recovery of 47% of tryptic activity. The molecular mass of the isolated enzyme was 40 kDa, demonstrating optimal activities at pH 8.0 and 50 °C. Enzymatic characterization demonstrated that the protease can hydrolyze the specific trypsin substrate, BApNA. This trypsin-like protease had a Km, Vmax, Kcat, and catalytic efficiency constant of 0.01775 mg/mL, 0.1082 mM/min, 3.86 s-1, and 217.46, respectively.

Improved accuracy in pentraxin-3 quantification assisted by aqueous biphasic systems as serum pretreatment strategies.

Although pentraxin-3 holds promise as a diagnosis/prognosis biomarker of microbial infections and lung cancer, its analysis in human serum can be constrained by matrix effects caused by high abundance proteins - human serum albumin and immunoglobulin G. Aqueous biphasic systems composed of polymers and citrate buffer are here proposed as a serum pretreatment step to improve the accuracy of pentraxin-3 analysis. Binodal curves were determined to identify the compositions required to form two phases and to correlate the polymers' properties and performance in serum pretreatment and biomarker extraction. Aqueous biphasic systems were evaluated regarding their ability to deplete human serum albumin and immunoglobulin G at the interphase. Polymers of relatively high to intermediate hydrophobicity were unveiled as efficient components to deplete high abundance serum proteins. Considering the possibility to extract pentraxin-3 from human serum into the polymer-rich phase, the system composed of polyethylene glycol with a molecular weight of 1000 g·mol-1 simultaneously achieved >93 % of human serum albumin and immunoglobulin G depletion and complete biomarker extraction. The accuracy of analysis of pretreated human serum by enzyme-linked immunosorbent assays outperformed that of a non-pretreated sample, with a relative error of 0.8 % compared to 14.6 %, contributing to boost pentraxin-3 usefulness as a biomarker.

Biofilm metagenomic characteristics behind high coulombic efficiency for propanethiol deodorization in two-phase partitioning microbial fuel cell.

Hydrophobic volatile organic sulfur compounds (VOSCs) are frequently found during sewage treatment, and their effective management is crucial for reducing malodorous complaints. Microbial fuel cells (MFC) are effective for both VOSCs abatement and energy recovery. However, the performance of MFC on VOSCs remains limited by the mass transfer efficiency of MFC in aqueous media. Inspired by two-phase partitioning biotechnology, silicone oil was introduced for the first time into MFC as a non-aqueous phase (NAP) medium to construct two-phase partitioning microbial fuel cell (TPPMFC) and augment the mass transfer of target VOSCs of propanethiol (PT) in the liquid phase. The PT removal efficiency within 32 h increased by 11-20% compared with that of single-phase MFC, and the coulombic efficiency of TPPMFC (11.01%) was 4.32-2.68 times that of single-phase MFC owing to the fact that highly active desulfurization and thiol-degrading bacteria (e.g., Pseudomonas, Achromobacter) were attached to the silicone oil surface, whereas sulfur-oxidizing bacteria (e.g., Thiobacillus, Commonas, Ottowia) were dominant on the anodic biofilm. The outer membrane cytochrome-c content and NADH dehydrogenase activity improved by 4.15 and 3.36 times in the TPPMFC, respectively. The results of metagenomics by KEGG and COG confirmed that the metabolism of PT in TPPMFC was comprehensive, and that the addition of a NAP upregulates the expression of genes related to sulfur metabolism, energy generation, and amino acid synthesis. This finding indicates that the NAP assisted bioelectrochemical systems would be promising to solve mass-transfer restrictions in low solubility contaminates removal.

Polysaccharide extracted from cultivated Sanghuangporous vaninii spores using three-phase partitioning with enzyme/ultrasound pretreatment: Physicochemical characteristics and its biological activity in vitro.

Sanghuangporous vaninii, as a valuable dietary supplement and medicinal ingredient, contains abundant bioactive polysaccharides that have health-promoting effects. In the present study, four polysaccharides (SVSPs-C, SVSPs-E, SVSPs-U, and SVSPs-E/U) were extracted for the first time from S. vaninii spores by three-phase partitioning (TPP), enzyme pretreatment before TPP (E-TPP), ultrasonic pretreatment before TPP (U-TPP), and enzyme pretreatment followed by ultrasonic before TPP (E/U-TPP) methods, respectively. Their physicochemical characteristics and in vitro pharmacological functions were determined and compared. Results showed that four TPP-based extraction methods had remarkable impacts on the extraction yield, chemical properties, monosaccharide compositions, and molecular weights (Mw) of SVSPs. Specifically, SVSPs-E/U obtained by E/U-TPP showed the highest extraction yield (25.40 %), carbohydrate content (88.50 %), and the lowest protein content (0.86 %). The four SVSPs had high-Mw (183.8-329.1 kDa) and low-Mw (23.0-156.4 kDa) fractions and mainly consisted of galactose, glucose, and mannose with different contents. In vitro bioactivities assays indicated that SVSPs-E/U possessed stronger antioxidant, hypoglycemic, hypouricemic, immunostimulatory, and antitumor activities than those of SVSPs-C, SVSPs-E, and SVSPs-U. Therefore, our results provide an efficient and promising extraction technique for bioactive polysaccharides from S. vaninii spores, as well as SVSPs had the potential to be applied in functional food, pharmaceutical, and cosmetics fields.

Occurrence and phase distribution of lipophilic marine algal toxins in the bottom boundary layer and sediment-porewater system of two mariculture sites.

To date, understanding the fate of lipophilic marine algal toxins (LMATs) in benthic environments on which cultivated shellfish depend is still limited. In this work, the occurrence, concentration levels, and phase distributions of LMATs in the benthic environments of two mariculture sites (Sishili and Rongcheng Bays) in China were investigated for the first time. Five LMATs: okadaic acid (OA), pectenotoxin-2 (PTX2), gymnodimine, 13-desmethyl spirolide C, and azaspiracid-2 (AZA2) and three derivatives: dinophysistoxin-1 isomer (DTX1-iso), pectenotoxin-2 seco acid, and 7-epi- pectenotoxin-2 seco acid were detected in different environmental samples. OA and PTX2 were the dominant LMATs in the bottom boundary layer (BBL) and sediment, whereas AZA2 was present in the sediment only. Notably, DTX1-iso was found for the first time to be widely distributed in the benthic environments of the bays. In BBL, the average proportion of LMATs in the dissolved phase (99.20%) was much higher than in the particulate phase (0.80%). Partition of LMATs was more balanced between sediment porewater (57.80% average proportion) and sediment (42.20%). The concentrations of ∑LMATs in the BBL seawater ranged from 19.09 ng/L to 41.57 ng/L (mean of 32.67 ng/L), and the spatial distribution trend was higher in offshore than nearshore. ∑LMATs concentrations in the sediment and porewater of the two bays ranged from 17.04 ng/kg to 150.13 ng/kg (mean of 53.58 ng/kg) and from 8.29 ng/L to 120.58 ng/L (mean of 46.63 ng/L), respectively. Their spatial distributions differed from those in BBL, showing a trend of high concentrations in areas with heavy land-based inputs. ∑LMATs concentrations in porewater were significantly higher than those in BBL seawaters, suggesting that the potential hazards of LMATs to benthic organisms may be underestimated.

Protein Extraction and Purification by Differential Solubilization.

The preparation of purified soluble proteins for biochemical studies is essential and the solubility of a protein of interest in various media is central to this process. Selectively altering the solubility of a protein is a rapid and economical step in protein purification and is based on exploiting the inherent physicochemical properties of a polypeptide. Precipitation of proteins, released from cells upon lysis, is often used to concentrate a protein of interest before further purification steps (e.g., ion exchange chromatography, size exclusion chromatography etc).Recombinant proteins may be expressed in host cells as insoluble inclusion bodies due to various influences during overexpression. Such inclusion bodies can often be solubilized to be reconstituted as functional, correctly folded proteins.In this chapter, we examine strategies for extraction/precipitation/solubilization of proteins for protein purification. We also present bioinformatic tools to aid in understanding a protein's propensity to aggregate/solubilize that will be a useful starting point for the development of protein extraction, precipitation, and selective re-solubilization procedures.

Co-culture of Kluyveromyces marxianus and Meyerozyma guilliermondii with In Situ Product Recovery of 2-Phenylethanol.

Production of 2-phenylethanol (2-PE) via Kluyveromyces marxianus is well-established. However, co-culture with other microbes in combination with in situ product recovery (ISPR) yields improved selectivity and volumetric productivity. Fermentation ofK. marxianus (MUCL 53775) with direct inclusion of absorptive polymer Hytrel3548 achieved ISPR, but accumulation of the byproduct phenylethyl acetate (PEA) was strongly favored. Co-culture of K. marxianus (MUCL 53775) with Meyerozyma guilliermondii (MUCL 28072) with ISPR limited PEA production, thereby improving the 2-PE selectivity from 13 to 90%, compared to a pure culture of K. marxianus (MUCL 53775) under similar conditions. This improved the volumetric productivity by 85% compared to 2-PE ISPR with a pure culture of K. marxianus. This is the first report of co-culture in a two-phase fermentation for 2-PE bioproduction and demonstrates that interactions between co-culture and ISPR techniques can modulate bioproduction between 2-PE and byproduct PEA, and this technique will be explored for other strain combinations and for other high-value molecules of interest.

Prevalence of the neurotoxin domoic acid in the aquatic environments of the Bohai and Northern Yellow seas in China.

Domoic acid (DA), a natural marine phytotoxin produced by toxigenic algae, is harmful to fishery organisms and the health of seafood consumers. In this study, we performed a whole-sea area investigation of DA in seawater, suspended particulate matter (SPM), and phytoplankton of the Bohai and Northern Yellow seas to clarify the occurrence, phase partitioning, spatial distribution, potential sources, and environmental influencing factors of DA in the aquatic environment. DA in different environmental media was identified using liquid chromatography-high resolution mass spectrometry and liquid chromatography-tandem mass spectrometry. DA was found to be predominantly in a dissolved phase (99.84 %) in seawater with only 0.16 % in SPM. Dissolved DA (dDA) was widely detected in nearshore and offshore areas of the Bohai Sea, Northern Yellow Sea, and Laizhou Bay with concentrations ranging from < limits of detection (LOD) to 25.21 ng/L (mean: 7.74 ng/L), < LOD to 34.90 ng/L (mean: 16.91 ng/L), and 1.74 ng/L to 38.20 ng/L (mean: 21.28 ng/L), respectively. dDA levels were relatively lower in the northern part than in the southern part of the study area. In particular, the dDA levels in the nearshore areas of Laizhou Bay were significantly higher than in other sea areas. This may be due to seawater temperature and nutrient levels exerting a crucial impact on the distribution of DA-producing marine algae in Laizhou Bay during early spring. Pseudo-nitzschia pungens may be the main source of DA in the study areas. Overall, DA was prevalent in the Bohai and Northern Yellow seas, especially in the nearshore aquaculture zone. Routine monitoring of DA in the mariculture zones of the northern seas and bays of China should be performed to warn shellfish farmers and prevent contamination.

Evaluating Neutral PFAS for Potential Dermal Absorption from the Gas Phase.

Exposures to per- and polyfluoroalkyl substances (PFAS) are of increasing concern. Assessments typically focus only on ingestion and inhalation exposure due to a lack of generally accepted approaches for estimating dermal absorption. Prior work indicates limited dermal absorption of ionic PFAS, but absorption of neutral PFAS has not been examined from the liquid vehicle or from vapor. Partitioning of semivolatile organic compounds from the gas phase to the skin surface (i.e., stratum corneum) is well known, but the potential for partitioning of neutral PFAS from the gas phase to the stratum corneum has yet to be estimated. The SPARC-estimated physicochemical properties were used to calculate transdermal permeability coefficients (kp_g) and dermal-to-inhalation (D/I) exposure ratios for two groups of neutral PFAS, including those on a U.S. Environmental Protection Agency PFAS list. 11 neutral PFAS gave calculated D/I ratios >5, indicating that direct transdermal absorption may be an important exposure pathway compared to inhalation. Data on consumer products or indoor air is needed for the 11 neutral PFAS, followed by possible biomonitoring to experimentally verify dermal absorption from air. Additional PFAS should be estimated by the protocol used here as they are identified in commercial products.

Extraction and purification of grape seed polysaccharides using pH-switchable deep eutectic solvents-based three-phase partitioning.

T-butanol is widely used in three-phase partitioning (TPP), which is harmful to the environment. pH-switchable deep eutectic solvents (DESs) can be used as recyclable alternatives to t-butanol. This study aimed to construct DES-based TPP for extracting and purifying grape seed polysaccharides (GSP). The main influence factors were investigated in single-factor experiments. DES-1 (dodecanoic acid: octanoic acid = 1:1)-based extraction was screened, and the extraction yield reached the maximum of 98.04 mg/g under the optimal conditions. Furthermore, DES can be recycled, only suffering a small loss capacity in extraction yield after 25 cycles. Most importantly, the extractability of DES could be completely recovered after switching and regeneration. The molecular weight of obtained GSP was 60 kDa, and the main monosaccharides of GSP included mannose, glucose, galactose, and arabinose. This study provides an efficient and sustainable method for the extraction of bioactive substances.

Improved terephthalic acid production from p-xylene using metabolically engineered Pseudomonas putida.

Terephthalic acid (TPA) is an important commodity chemical used as a monomer of polyethylene terephthalate (PET). Since a large quantity of PET is routinely manufactured and consumed worldwide, the development of sustainable biomanufacturing processes for its monomers (i.e. TPA and ethylene glycol) has recently gained much attention. In a previous study, we reported the development of a metabolically engineered Escherichia coli strain producing 6.7 g/L of TPA from p-xylene (pX) with a productivity and molar conversion yield of 0.278 g/L/h and 96.7 mol%, respectively. Here, we report metabolic engineering of Pseudomonas putida KT2440, a microbial chassis particularly suitable for the synthesis of aromatic compounds, for improved biocatalytic conversion of pX to TPA. To develop a plasmid-free, antibiotic-free, and inducer-free biocatalytic process for cost-competitive TPA production, all heterologous genes required for the synthetic pX-to-TPA bioconversion pathway were integrated into the chromosome of P. putida KT2440 by RecET-based markerless recombineering and overexpressed under the control of constitutive promoters. Next, TPA production was enhanced by integrating multiple copies of the heterologous genes to the ribosomal RNA genes through iteration of recombineering-based random integration and subsequent screening of high-performance strains. Finally, fed-batch fermentation process was optimized to further improve the performance of the engineered P. putida strain. As a result, 38.25 ± 0.11 g/L of TPA was produced from pX with a molar conversion yield of 99.6 ± 0.6%, which is equivalent to conversion of 99.3 ± 0.8 g pX to 154.6 ± 0.5 g TPA. This superior pX-to-TPA biotransformation process based on the engineered P. putida strain will pave the way to the commercial biomanufacturing of TPA in an industrial scale.

Three-phase partitioning, a recyclable method for the purification of R-phycoerythrin from a red algae Porphyra yezoensis.

In this study, R-phycoerythrin (R-PE) was isolated and characterized from Porphyra yezoensis by three-phase partitioning (TPP) method. The effects of temperature, time, pH, salt saturation, and volume ratio on the purity and recovery rate of R-PE were studied. The optimum extraction conditions were determined as follows: salt saturation of 70%, temperature of 25 °C, time of 45 min, pH of 7.0, and volume ratio of 1:1. Under the optimal extraction conditions, the purity of R-PE was 3.90. The results of SDS-PAGE showed that R-PE has three bands at 23 kDa, 22 kDa, and 18 kDa, corresponding to its α, ß, γ subunits. The structure and optical activity of R-PE did not change before and after purification based on ultraviolet, infrared, and fluorescence spectra. In addition, the purity and recovery rate of R-PE extracted by tert-butanol were evaluated. The results showed that the extraction performance of tert-butanol for R-PE remained unchanged in three recoveries. These show that TPP is an efficient, green, and recyclable extraction technology.

Ecological risk assessment of organochlorine pesticide mixture in South China Sea and East China Sea under the effects of seasonal changes and phase-partitioning.

Organochlorine pesticides (OCPs), chlorinated hydrocarbon derivatives extensively used in agriculture and chemical industry, have been banned for several decades in most developed countries. However, OCPs act as persistent organic pollutants due to their semi-volatility nature, high ability for wide range transportation and faster bioaccumulation, and thus it has remained as a topical global concern. This study focuses on OCP distributions, sources and associated ecological risks in the globally important OCP source-sink regions of South China Sea (SCS) and East China Sea (ECS). Given the co-exposure of multiple OCPs that undermine the classical risk assessment of single OCP species, a two-tier mixture risk assessment approach has been employed with explicit consideration of seasonal changes and phase-partitioning effects. The results indicate existence of multiple sources varied across the seasons and between the dissolved and particulate phases. Potential sources include the current-use of lindane or historical use of technical HCH, input of technical DDTs, long-range atmospheric transport, and deposition of HCB from land surfaces. There are no wide high-risk zones. Dissolved HCB and DDTs have posed low-to-medium levels of risks broadly distributed across the seasons. Relatively greater risks are observed in summer in the both dissolved and particulate phases. The study has shown the importance of considering mixture risk assessments with the effects of phase-partitioning and seasonal changes for efficient oceanic risk management.