Colombian Sustainability Perspective on Fused Deposition Modeling Technology: Opportunity to Develop Recycled and Biobased 3D Printing Filaments.

In the context of the preservation of natural resources, researchers show a growing interest in developing eco-friendly materials based on recycled polymers and natural fiber biocomposites to minimize plastic and agroindustrial waste pollution. The development of new materials must be integrated within the circular economy concepts to guarantee sustainable production. In parallel, fused deposition modeling, an additive manufacturing technology, provides the opportunity to use these new materials in an efficient and sustainable manner. This review presents the context of plastics and agro-industrial fiber pollution, followed by the opportunity to give them added value by applying circular economy concepts and implementing these residues to develop new materials for the manufacture of fused deposition modeling 3D printing technique feedstock. Colombian perspective is highlighted since 3D printing technology is growing there, and Colombian biodiversity represents a high reservoir of materials. Also, recycling in Colombia promotes compliance with the 2030 Agenda and the Sustainable Development Goals.

Physical-mechanical properties of wood panel composites produced with Qualea sp. sawdust and recycled polypropylene.

Adhesive-free wood-plastic composite panels made with lignocellulosic wastes, and recycled plastics can be a sustainable option for generating useful "green" products. The present work assessed the physical-mechanical properties of adhesive-free panels produced with Qualea sp. sawdust and recycled polypropylene (PP). Discarded PP packaging was used. The packages were washed and ground with a laboratory knife mill until particle size of 10 to 14 mesh. Qualea sp. sawdust was sieved to select particle size of 14 to 30 mesh. Four experimental treatments were assessed by varying the percentages of PP and sawdust, as follows, 60 and 40%, 70 and 30%, 80 and 20%, and 90 and 10%, in an entirely randomized design with 3 panels per treatment, totaling 12 panels. The mats were hot-pressed at 180 °C during 20 min, the first 10 min under pressure of 1.0 MPa and the remaining 10 min at 42 MPa. Physical-mechanical properties of the panels were obtained as follows: density, moisture content, water absorption, thickness swelling, moduli of elasticity and rupture, and Rockwell hardness. In general, an increase of the percentage of PP provided higher dimensional stability to the panels, but there was no significant influence on mechanical strength.