Modeling brain pathology to study nose-to-brain drug delivery.

OBJECTIVES: To create a new mucoadhesive dosage form based on PluronicF127 followed by transformation into a gel form upon intranasal administration for targeted delivery to brain tissueMETHODS: Citicoline, cytidine diphosphocholine, designated as CDP-choline, was purchased as a white powder with the molecular weight of 510.31 g/mol. The triblock copolymers of polyethylene glycol-block-polypropylene glycol-block-polyethylene glycol (PEG-PPG-PEG), branded as Pluronic F127, was used. RESULTS: When instilled into the nasal cavity, Pluronic F127 for intranasal administration is transformed into a gel that remains retained for 45-55 minutes, which promotes better penetration of drugs into the brain tissue. CONCLUSION: The polymer's gelling and adhesive properties performed well, which is crucial for further research at the preclinical stage (Tab. 1, Fig. 5, Ref. 28).

An Optical Reusable 2D Radiochromic Gel-Based System for Ionising Radiation Measurements in Radiotherapy.

This work describes the development of a reusable 2D detector based on radiochromic reaction for radiotherapy dosimetric measurements. It consists of a radiochromic gel dosimeter in a cuboidal plastic container, scanning with a flatbed scanner, and data processing using a dedicated software package. This tool is assessed using the example of the application of the coincidence test of radiation and mechanical isocenters for a medical accelerator. The following were examined: scanning repeatability and image homogeneity, the impact of image processing on data processing in coincidence tests, and irradiation conditions-monitor units per radiation beam and irradiation field are selected. Optimal conditions for carrying out the test are chosen: (i) the multi-leaf collimator gap should preferably be 5 mm for 2D star shot irradiation, (ii) it is recommended to apply ≥2500-≤5000 MU per beam to obtain a strong signal enabling easy data processing, (iii) Mean filter can be applied to the images to improve calculations. An approach to dosimeter reuse with the goal of reducing costs is presented; the number of reuses is related to the MUs per beam, which, in this study, is about 5-57 for 30,000-2500 MU per beam (four fields). The proposed reusable system was successfully applied to the coincidence tests, confirming its suitability as a new potential quality assurance tool in radiotherapy.

Development of novel 3D printable inks for protein delivery.

The application of 3D printing technology in the delivery of macromolecules, such as proteins and enzymes, is limited by the lack of suitable inks. In this study, we report the development of novel inks for 3D printing of constructs containing proteins while maintaining the activity of the proteins during and after printing. Different ink formulations containing Pluronic F-127 (20-35 %, w/v), trehalose (2-10 %, w/v) or mannitol, poly (ethylene glycol) diacrylate (PEGDA) (0 or 10 %, w/w), and diphenyl(2,4,6-trimethylbenzoyl) phosphine oxide (TPO, 0 or 0.2 mg/mL) were prepared for 3D-microextrusion printing. The F2 formulation that contained ß-galactosidase (ß-gal) as a model enzyme, Pluronic F-127 (30 %), and trehalose (10 %) demonstrated the desired viscosity, printability, and dose flexibility. The shear-thinning property of the F2 formulation enabled the printing of ß-gal containing constructs with a good peak force during extrusion. After 3D printing, the enzymatic activity of the ß-gal in the constructs was maintained for an extended period, depending on the construct design and storage conditions. For instance, there was a 50 % reduction in ß-gal activity in the two-layer constructs, but only a 20 % reduction in the four-layer construct (i.e., 54.5 ± 1.2 % and 82.7 ± 9.9 %, respectively), after 4 days of storage. The ß-gal activity in constructs printed from the F2 formulation was maintained for up to 20 days when stored in sealed bags at room temperatures (21 ± 2 °C), but not when stored unsealed in the same conditions (e.g., ∼60 % activity loss within 7 days). The ß-gal from constructs printed from F2 started to release within 5 min and reached 100 % after 20 min. With the design flexibility offered by the 3D printing, the ß-gal release from the constructs was delayed to 3 h by printing a backing layer of ß-gal-free F5 ink on the constructs printed from the F2 ink. Finally, ovalbumin as an alternative protein was also incorporated in similar ink compositions. Ovalbumin exhibited a release profile like that of the ß-gal, and the release can also be modified with different shape design and/or ink composition. In conclusion, ink formulations that possess desirable properties for 3D printing of protein-containing constructs while maintaining the protein activity during and after printing were developed.

Development and Characterization of Gelatin-Based Hydrogels Containing Triblock Copolymer and Phytic Acid.

In recent research, significant interest has been directed towards gelatin-based hydrogels due to their affordable price, extensive availability, and biocompatibility, making them promising candidates for various biomedical applications. The development and characterization of novel hydrogels formed from varying ratios of gelatin, triblock copolymer Pluronic F-127, and phytic acid have been presented. Swelling properties were examined at different pH levels. The morphology of hydrogels and their thermal properties were analyzed using scanning electron microscopy (SEM), thermogravimetric analysis (TG), and differential scanning calorimetry (DSC). Fourier-transform infrared (FTIR) analysis of the hydrogels was also performed. The introduction of phytic acid in the hydrogel plays a crucial role in enhancing the intermolecular interactions within gelatin-based hydrogels, contributing to a more stable, elastic, and robust network structure.

F127/chlorin e6-nanomicelles to enhance Ce6 solubility and PDT-efficacy mitigating lung metastasis in melanoma.

Photodynamic Therapy (PDT) is a promising paradigm for treating cancer, especially superficial cancers, including skin and oral cancers. However, the effectiveness of PDT is hindered by the hydrophobicity of photosensitizers. Here, chlorin e6 (Ce6), a hydrophobic photosensitizer, was loaded into pluronic F127 micelles to enhance solubility and improve tumor-specific targeting efficiency. The resulting Ce6@F127 Ms demonstrated a significant increase in solubility and singlet oxygen generation (SOG) efficiency in aqueous media compared to free Ce6. The confocal imaging and fluorescence-activated cell sorting (FACS) analysis confirmed the enhanced internalization rate of Ce6@F127 Ms in murine melanoma cell lines (B16F10) and human oral carcinoma cell lines (FaDu). Upon laser irradiation (666 nm), the cellular phototoxicity of Ce6@F127 Ms against B16F10 and FaDu was approximately three times higher than the free Ce6 treatment. The in vivo therapeutic investigations conducted on a murine model of skin cancer demonstrated the ability of Ce6@F127 Ms, when combined with laser treatment, to penetrate solid tumors effectively, which resulted in a significant reduction in tumor volume compared to free Ce6. Further, the Ce6@F127 Ms demonstrated upregulation of TUNEL-positive cells, downregulation of proliferation markers in tumor tissues, and prevention of lung metastasis with insignificant levels of proliferating cells and collagenase, as validated through immunohistochemistry. Subsequent analysis of serum and blood components affirmed the safety and efficacy of Ce6@F127 Ms in mice. Consequently, the developed Ce6@F127 Ms exhibits significant potential for concurrently treating solid tumors and preventing metastasis. The photodynamic formulation holds great clinical translation potential for treating superficial tumors.

Pluronic F127 hydrogel-loaded extracellular vesicles from adipose-derived mesenchymal stem cells promote tracheal cartilage regeneration via SCNN1B delivery.

Extracellular vesicles (EVs) derived from adipose-derived mesenchymal stem cells (AMSC-EVs) have been highlighted as a cell-free therapy due to their regenerative capability to enhance tissue and organ regeneration. Herein, we aimed to examine the mechanism of PF127-hydrogel@AMSC-EVs in promoting tracheal cartilage defect repair. Based on bioinformatics methods, SCNN1B was identified as a key gene for the osteogenic differentiation of AMSCs induced by AMSC-EVs. EVs were isolated from rat AMSCs and then loaded onto thermo-sensitive PF-127 hydrogel to develop PF127-hydrogel@AMSC-EVs. It was established that PF127-hydrogel@AMSC-EVs could effectively deliver SCNN1B into AMSCs, where SCNN1B promoted AMSC osteogenic differentiation. The promotive effect was evidenced by enhanced ALP activity, extracellular matrix mineralization, and expression of s-glycosaminoglycan, RUNX2, OCN, collagen II, PERK, and ATF4. Furthermore, the in vivo experiments revealed that PF127-hydrogel@AMSC-SCNN1B-EVs stimulated tracheal cartilage regeneration in rats through PERK/ATF4 signaling axis activation. Therefore, PF127-hydrogel@AMSC-SCNN1B-EVs may be a novel cell-free biomaterial to facilitate tracheal cartilage regeneration and cartilage injury repair.

Dual-Delivery Temperature-Sensitive Hydrogel with Antimicrobial and Anti-Inflammatory Brevilin A and Nitric Oxide for Wound Healing in Bacterial Infection.

Bacterial infections impede the wound healing process and can trigger local or systemic inflammatory responses. Therefore, there is an urgent need to develop a dressing with antimicrobial and anti-inflammatory properties to promote the healing of infected wounds. In this study, BA/COs/NO-PL/AL hydrogels were obtained by adding brevilin A (BA) camellia oil (CO) submicron emulsion and nitric oxide (NO) to hydrogels consisting of sodium alginate (AL) and Pluronic F127 (PL). The hydrogels were characterized through dynamic viscosity analysis, differential scanning calorimetry, and rheology. They were evaluated through anti-inflammatory, antimicrobial, and wound healing property analyses. The results showed that BA/COs/NO-PL/AL hydrogels were thermo-responsive and had good ex vivo and in vivo anti-inflammatory activity, and they also exhibited strong antimicrobial activity against methicillin-resistant Staphylococcus aureus Pseudomonas aeruginosa (MRPA) and methicillin-resistant Staphylococcus aureus (MRSA). They were able to effectively promote healing of the infected wound model and reduce inflammation and bacterial burden. H&E and Masson's staining showed that BA/COs/NO-PL/AL hydrogels promoted normal epithelial formation and collagen deposition. In conclusion, BA/COs/NO-PL/AL hydrogels are promising candidates for promoting the healing of infected wounds.

Amphiphilic, lauric acid-coupled pluronic-based nano-micellar system for efficient glipizide delivery.

Glipizide; an insulin secretagogue belonging to the sulfonylurea class, is a widely used antidiabetic drug for managing type 2 diabetes. However, the need for life-long administration and repeated doses poses challenges in maintaining optimal blood glucose levels. In this regard, orally active sustained-release nano-formulations can be a better alternative to traditional antidiabetic formulations. The present study explored an innovative approach by formulating orally active sustained-release nano-micelles using the amphiphilic lauric acid-conjugated-F127 (LAF127) block copolymer. LAF127 block copolymer was synthesized through esterification and thoroughly characterized before being employed to develop glipizide-loaded nano-micelles (GNM) via the thin-film hydration technique. The optimized formulation exhibited mean particle size of 341.40 ± 3.21 nm and depicted homogeneous particle size distribution with a polydispersity index (PDI) < 0.2. The formulation revealed a surface charge of -17.11 ± 6.23 mV. The in vitro release studies of glipizide from developed formulation depicted a sustained release profile. Drug loaded micelles exhibited a substantial reduction in blood glucose levels in diabetic rats for a duration of up to 24 h. Notably, neither the blank nano-micelles of LAF127 nor the drug loaded micelles manifested any indications of toxicity in healthy rats. This study provides an insight on suitability of synthesized LAF127 block copolymer for development of effective oral drug delivery systems for anti-diabetic activity without any significant adverse effects.

Surface charge-dependent cytokine production using near-infrared emitting silicon quantum dots.

Toll-like receptor 9 (TLR-9) is a protein that helps our immune system identify specific DNA types. Upon detection, CpG oligodeoxynucleotides signal the immune system to generate cytokines, essential proteins that contribute to the body's defence against infectious diseases. Native phosphodiester type B CpG ODNs induce only Interleukin-6 with no effect on interferon-α. We prepared silicon quantum dots containing different surface charges, such as positive, negative, and neutral, using amine, acrylate-modified Plouronic F-127, and Plouronic F-127. Then, class B CpG ODNs are loaded on the surface of the prepared SiQDs. The uptake of ODNs varies based on the surface charge; positively charged SiQDs demonstrate higher adsorption compared to SiQDs with negative and neutral surface charges. The level of cytokine production in peripheral blood mononuclear cells was found to be associated with the surface charge of SiQDs prior to the binding of the CpG ODNs. Significantly higher levels of IL-6 and IFN-α induction were observed compared to neutral and negatively charged SiQDs loaded with CpG ODNs. This observation strongly supports the notion that the surface charge of SiQDs effectively regulates cytokine induction.

Injectable Double Crosslinked Hydrogel-Polypropylene Composite Mesh for Repairing Full-Thickness Abdominal Wall Defects.

Abdominal wall defects are common clinical diseases, and mesh repair is the standard treatment method. The most commonly used polypropylene (PP) mesh in clinical practice has the advantages of good mechanical properties, stable performance, and effective tissue integration effect. However, direct contact between abdominal viscera and PP mesh can lead to severe abdominal adhesions. To prevent this, the development of a hydrogel-PP composite mesh with anti-adhesive properties may be an effective measure. Herein, biofunctional hydrogel loaded with rosmarinic acid is developed by modifying chitosan and Pluronic F127, which possesses suitable physical and chemical properties and commendable in vitro biocompatibility. In the repair of full-thickness abdominal wall defects in rats, hydrogels are injected onto the surface of PP mesh and applied to intraperitoneal repair. The results indicate that the use of hydrogel-PP composite mesh can alleviate abdominal adhesions resulting from traditional PP mesh implantation by decreasing local inflammatory response, reducing oxidative stress, and regulating the fibrinolytic system. Combined with the tissue integration ability of PP mesh, hydrogel-PP composite mesh has great potential for repairing full-thickness abdominal wall defects.

Preparation, Characterization, and Hepatoprotective Activity Evaluation of Quercetin-loaded Pluronic® F127/Chitosan-Myristic Acid Mixed Micelles.

BACKGROUND: Quercetin (QTN) is a flavonol antioxidant found in foods, medicinal plants, fruits, vegetables, and beverages. QTN oral consumption produces several biological effects, including antioxidant, cardioprotective, anti-apoptotic, anti-cancer, neuroprotection, anti-hypertensive, and chemo preventive. OBJECTIVE: The study aimed to prepare Pluronic®F127/chitosan-myristic acid copolymer (PF127/C-MAc)-based mixed micelles (QTN MM) to improve the biopharmaceutical and hepatoprotective potential of QTN. METHODS: QTN MM was developed employing thin-film hydration and optimized using full factorial design (FFD). Optimized QTN MM was analyzed using scanning electron microscopy (SEM), differential scanning calorimetry (DSC), Fourier-transform infrared spectroscopy (FT-IR), powder x-ray diffractometry (PXRD), in vitro dissolution, ex vivo permeation, and in vivo antioxidant activity in carbon tetrachloride (CCL4)-induced albino rats. RESULTS: PF127/C-MAc ratio (1:1) with CMC value ~ 5 µg/mL showed the suitability for MM. Characterization supported the formation of MM. QTN MM revealed prominent encapsulation efficiency and drug loading of about ~ 95.10% and ~ 12.28% w/w, respectively. MM spherical shape of QTN with a smaller particle size of ~ 34.08 nm and a higher zeta potential of ~ 36.24 nm indicated excellent physical stability. Dissolution and ex vivo permeation results revealed higher dissolution and permeation of QTN MM compared to QTN and PM. In vivo antioxidant activity suggested that QTN MM at (~ 20 mg/kg, p.o.) restored the enhanced marker enzyme level compared to QTN. CONCLUSION: The findings demonstrate that developed QTN MM could be used as an alternative nanocarrier to increase the biopharmaceutical and hepatoprotective potential of QTN and other flavonoids.

Rapid Volumetric Additive Manufacturing in Solid State: A Demonstration to Produce Water-Content-Dependent Cooling/Heating/Water-Responsive Shape Memory Hydrogels.

In this study, we demonstrate the feasibility of rapid volumetric additive manufacturing in the solid state. This additive manufacturing technology is particularly useful in outer space missions (microgravity) and/or for harsh environment (e.g., on ships and vehicles during maneuvering, or on airplanes during flight). A special thermal gel is applied here to demonstrate the concept, that is, ultraviolet crosslinking in the solid state. The produced hydrogels are characterized and the water-content-dependent heating/cooling/water-responsive shape memory effect is revealed. Here, the shape memory feature is required to eliminate the deformation induced in the process of removing the uncrosslinked part from the crosslinked part in the last step of this additive manufacturing process.

Digital Light Processing 4D Printing of Poloxamer Micelles for Facile Fabrication of Multifunctional Biocompatible Hydrogels as Tailored Wearable Sensors.

The lack of both digital light processing (DLP) compatible and biocompatible photopolymers, along with inappropriate material properties required for wearable sensor applications, substantially hinders the employment of DLP 3D printing in the fabrication of multifunctional hydrogels. Herein, we discovered and implemented a photoreactive poloxamer derivative, Pluronic F-127 diacrylate, which overcomes these limitations and is optimized to achieve DLP 3D printed micelle-based hydrogels with high structural complexity, resolution, and precision. In addition, the dehydrated hydrogels exhibit a shape-memory effect and are conformally attached to the geometry of the detection point after rehydration, which implies the 4D printing characteristic of the fabrication process and is beneficial for the storage and application of the device. The excellent cytocompatibility and in vivo biocompatibility further strengthen the potential application of the poloxamer micelle-based hydrogels as a platform for multifunctional wearable systems. After processing them with a lithium chloride (LiCl) solution, multifunctional conductive ionic hydrogels with antifreezing and antiswelling properties along with good transparency and water retention are easily prepared. As capacitive flexible sensors, the DLP 3D printed micelle-based hydrogel devices exhibit excellent sensitivity, cycling stability, and durability in detecting multimodal deformations. Moreover, the DLP 3D printed conductive hydrogels are successfully applied as real-time human motion and tactile sensors with satisfactory sensing performances even in a -20 °C low-temperature environment.

An injectable thermosensitive hyaluronic acid/pluronic F-127 hydrogel for deep penetration and combination therapy of frozen shoulder.

Frozen shoulder (FS) is a common and progressive shoulder disorder that causes glenohumeral joint stiffness, characterized by inflammation and fibrosis. The treatment options are quite limited, and the therapeutic response is hindered by the fibrous membrane formed by excessive collagen and the rapid removal by synovial fluid. To address these challenges, we designed a hyaluronic acid/Pluronic F-127 (HP)-based injectable thermosensitive hydrogel as a drug carrier loaded with dexamethasone and collagenase (HPDC). We screened for an optimal HP hydrogel that can sustain drug release for approximately 10 days both in vitro and in vivo. In the meanwhile, we found that HP hydrogel could inhibit the proliferation and diminish the adhesion capacity of rat synovial cells induced by transforming growth factor-ß1. Furthermore, using an established immobilization rat model of FS, intra-articular injection of HPDC significantly improved joint range of motion compared to medication alone. Relying on sustained drug release, the accumulated collagen fibers were degraded by collagenase to promote the deep delivery of dexamethasone. These findings showed a positive combined treatment effect of HPDC, providing a novel idea for the comprehensive treatment of FS.

Design of Liquid Formulation Based on F127-Loaded Natural Dimeric Flavonoids as a New Perspective Treatment for Leishmaniasis.

Infectious and Parasitic Diseases (IPD) remain a challenge for medicine due to several interconnected reasons, such as antimicrobial resistance (AMR). American tegumentary leishmaniasis (ATL) is an overlooked IPD causing persistent skin ulcers that are challenging to heal, resulting in disfiguring scars. Moreover, it has the potential to extend from the skin to the mucous membranes of the nose, mouth, and throat in both humans and various animals. Given the limited effectiveness and AMR of current drugs, the exploration of new substances has emerged as a promising alternative for ATL treatment. Arrabidaea brachypoda (DC). Bureau is a native Brazilian plant rich in dimeric flavonoids, including Brachydin (BRA), which displays antimicrobial activity, but still little has been explored regarding the development of therapeutic formulations. In this work, we present the design of a low-cost liquid formulation based on the use of Pluronic F127 for encapsulation of high BRA concentration (LF-B500). The characterization techniques revealed that BRA-loaded F127 micelles are well-stabilized in an unusual worm-like form. The in vitro cytotoxicity assay demonstrated that LF-B500 was non-toxic to macrophages but efficient in the inactivation of forms of Leishmania amazonensis promastigotes with IC50 of 16.06 µg/mL. The results demonstrated that LF-B500 opened a new perspective on the use of liquid formulation-based natural products for ATL treatment.

Thermoresponsive and Injectable Pluronic F127 Hydrogel for Loading Adipose-Derived Mesenchymal Stem Cells.

BACKGROUND: Stem cell-based therapies display immense potential in regenerative medicine, highlighting the crucial significance of devising efficient delivery methods. This study centers on a pioneering approach that utilizes Pluronic F127 (PF127) as a thermoresponsive and injectable hydrogel designed for the encapsulation of adipose-derived mesenchymal stem cells (AdMSCs). METHODS: The degradation profile, gelation time, and microstructure of the PF127 hydrogel were thoroughly examined. AdMSCs were isolated, expanded, and characterized based on their multi-lineage differentiation potential. AdMSCs from the third passage were specifically employed for encapsulation within the PF127 hydrogel. Subsequently, the cytotoxicity of the AdMSC-loaded PF127 hydrogel was assessed using 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) and apoptosis assays. RESULTS: Characterized by scanning electron microscopy (SEM), the PF127 hydrogel exhibited a porous structure, indicating its suitability for accommodating AdMSCs and facilitating wound healing. The PF127 hydrogel demonstrated reversible phase transitions, rendering it suitable for in vivo applications. Studies on the gelation time of PF127 hydrogel unveiled a concentration-dependent decrease in gelation time, offering adaptability for diverse medical applications. Analysis of the degradation profile showcased a seven-day degradation period, leading to the decision for weekly topical applications. Cytotoxicity assessments confirmed that AdMSCs loaded into the PF127 hydrogel maintained heightened metabolic activity for up to one week, affirming the safety and appropriateness of the PF127 hydrogel for encapsulating cellular therapeutics. Furthermore, cell apoptosis assays consistently indicated low rates of apoptosis, emphasizing the viability and robust health of AdMSCs when delivered within the hydrogel. CONCLUSIONS: These findings underscore the vast potential of PF127 hydrogel as a versatile and biocompatible delivery system for AdMSCs in the realm of regenerative medicine. Boasting adjustable gelation properties and a remarkable capacity for cell encapsulation, this pioneering delivery system presents a promising path for applications in tissue engineering and wound healing. Ultimately, these advancements propel and elevate the landscape of regenerative medicine.

Therapeutic potential of luteolin-loaded poly(lactic-co-glycolic acid)/modified magnesium hydroxide microsphere in functional thermosensitive hydrogel for treating neuropathic pain.

Neuropathic pain (NP) is a debilitating condition stemming from damage to the somatosensory system frequently caused by nerve injuries or lesions. While existing treatments are widely employed, they often lead to side effects and lack specificity. This study aimed to alleviate NP by developing an innovative sustained-release thermosensitive hydrogel system. The system incorporates hyaluronic acid (HA)/Pluronic F127 injectable hydrogel and bupivacaine (Bup, B) in combination with poly(lactic-co-glycolic acid; PLGA)/modified magnesium hydroxide (MH)/luteolin (Lut; PML) microspheres (PML@B/Gel). The PML@B/Gel was designed for localized and prolonged co-delivery of Bup and Lut as an anesthetic and anti-inflammatory agent, respectively. Our studies demonstrated that PML@B/Gel had exceptional biocompatibility, anti-inflammatory, and antioxidant properties. In addition, it exhibited efficient pain relief in in vitro cellular assays. Moreover, this functional hydrogel showed substantial sustained drug release while diminishing microglial activation. Consequently, it effectively mitigated mechanical allodynia and thermal hyperalgesia in in vivo rat models of chronic constriction injury (CCI). Based on our research findings, PML@B/Gel emerges as a promising therapeutic approach for the protracted treatment of NP.

Structure-dynamics correlations in composite PF127-PEG-based hydrogels; cohesive/hydrophobic interactions determine phase and rheology and identify the role of micelle concentration in controlling 3D extrusion printability.

A library of composite polymer networks (CPNs) were formed by combining Pluronic F127, as the primary gelator, with a range of di-acrylate functionalised PEG polymers, which tune the rheological properties and provide UV crosslinkability. A coarse-grained sol-gel room temperature phase diagram was constructed for the CPN library, which identifies PEG-dependent disruption of micelles as leading to liquefication. Small angle X-ray scattering and rheological measurements provide detailed insight into; (i) micelle-micelle ordering; (ii) micelle-micelle disruption, and; (iii) acrylate-micelle disruption; with contributions that depend on composition, including weak PEG chain length and end group effects. The influence of composition on 3D extrusion printability through modulation of the cohesive/hydrophobic interactions was assessed. It was found that only micelle content provides consistent changes in printing fidelity, controlled largely by printing conditions (pressure and feed rate). Finally, the hydrogels were shown to be UV photo-crosslinkable, which further improves fidelity and structural integrity, and usefully reduces the mesh size. Our results provide a guide for design of 3D-printable CPN inks for future biomedical applications.

Gelation Behaviour of Pluronic F127/Polysaccharide Systems Revealed via Thioflavin T Fluorescence.

Fast, reliable methods for characterizing the micelle-to-gel transition in emerging Pluronic F127/polysaccharide materials are essential for tailoring their applications as in situ gelling delivery systems. This study describes a simple fluorimetric method based on the response to gelation of the molecular probe thioflavin T (ThT). The techniques employed are (second derivative) steady-state and synchronous fluorescence. The capabilities of ThT as gelation reporter are tested for three model systems: Pluronic F127 (P16.6%), Pluronic F127/alginate (P16.6%ALG2%) and Pluronic F127/hyaluronic acid (P16.6%HA0.5%). We demonstrate that the changes in the short and long wavelength emissions of ThT allow accurate determination of the critical gelation temperatures in the investigated systems. The spectroscopic data providing information at molecular level are complemented with differential scanning microcalorimetric results revealing additional macroscopic insight into the micellization process. The gelation study is preceded by a solvatochromic analysis of ThT.

Validated HPLC method for simultaneous quantitative determination of dimethylcurcumin and resveratrol in pluronic-F127 nanomicelles: Formulation with enhanced anticancer efficacy.

Nano-micelles offer a promising vehicle for the delivery various therapeutically significant biologicals. Development of convenient and efficient chromatographic methods for the quantitative determination of the active pharmaceutical ingredients in such systems is of immense importance. In this study pluronic-F-127 nano-micelles were prepared and loaded with dimethylcurcumin (DMC) and resveratrol (Res). A simple, convenient and effective HPLC method was developed for the quantitative estimation of DMC and Res in the polymeric nano-micelles through a single injection. A reverse-phase ACE® C18 column (250 mm × 4.6 mm) was used with a gradient mobile phase system consisting of 1 % MeOH and 0.1 % H3PO4:100 % acetonitrile at 1 mL/min flow rate with UV detection for Res, and fluorescence detector for DMC. The calibration curves generated for both the compounds were found linear with r2 values of 1.000 over a concentration range of 2-25 µg/mL with low limit of detection (LOD) values of 0.37 and 0.16 µg/mL for DMC and Res respectively and limit of quantification (LOQ) values of 1.23 and 0.55 µg/mL for DMC and Res respectively. Similarly, accuracy was found in a range of 98.80 -102.47 % for DMC and 100.58-101.77 % for Res. Furthermore, the within-run precisions (%RSD) were 0.073 - 0.444% for DMC and 0.159 - 0.917% for Res, while between-run precisions (%RSD) were 0.344 - 1.47 for DMC and 0.458 - 1.651 for Res. Moreover, the DMC with Res co-loaded nanomicelles showed higher activity against MCF-7 and MDA-MB 231 compared to DMC and Res alone. Overall, this study presented a simple, convenient, precise and accurate method for the quantitative determination of DMC and Res in polymeric nano-micelles which have anticancer potential.•A simple HPLC for the quantitative determination of DMC and Res in nanomicelles having anti-cancer potential.•Non complicate with high degree of recoveries of sample preparation process.•This method can be used to determine a mixture of DMC and Res in pharmaceutical formulation in single injection.