Enhancement of Mechanical Properties of High-Thermal-Conductivity Composites Comprising Boron Nitride and Poly(methyl methacrylate) Resin through Material Design Utilizing Hansen Solubility Parameters.

Materials for heat sinks in automotive heat dissipation systems must demonstrate both high thermal conductivity and stress resistance during assembly. This research proposes a composite material, comprised of thermally conductive ceramic fillers and matrix resins, as a suitable option for such application. The strategy for designing this material interface is directed with Hansen solubility parameters (HSP). A composite material featuring a honeycomb-like structure made of poly(methyl methacrylate) (PMMA) and boron nitride (BN) particles was successfully fabricated through press molding. This yielded a continuous BN network exhibiting high thermal conductivity and moderate mechanical strength. The HSP evaluation led to the suggestion of introducing highly polar functional groups into the matrix resin to enhance the affinity between PMMA resin and BN fillers. In line with this recommendation, a nitrile (CN) group─a highly polar group─was introduced to PMMA (CN-PMMA), significantly enhancing the composite's maximum bending stress without noticeably degrading other properties. Surface HSP evaluation through contact angle measurements revealed an "interface enrichment effect", with the CN groups concentrating at the resin-filler interface and effectively interacting with the surface functional groups on the BN particles, which resulted in an increase in the maximum bending stress. These findings emphasize the advantage of employing HSP methodologies in designing high-performance composite materials.

Composite Nanomaterials Based on Polymethylmethacrylate Doped with Carbon Nanotubes and Nanoparticles: A Review.

Composite polymer materials have high strength and lightness, which makes them attractive for use in a variety of structures and products. The present article contains an overview of modern works devoted to the production of composite materials based on poly(methyl methacrylate) (PMMA) with improved characteristics. The possibility of obtaining such materials can be a key area for creating more efficient and durable products in various industries. Various methods were considered to improve the characteristics of PMMA by doping the polymer matrix with carbon nanotubes (CNTs), graphite, nanohydroxyapatite particles, micro-zirconia nanoparticles, titanium dioxide, etc. The possibilities of using the obtained composite materials in various industries such as aviation, automotive, construction, medical and others are discussed. This article also presents the results of our own research on the mechanisms of interaction of PMMA with single-layer CNTs, leading to the creation of a composite polymer system "PMMA+CNT", achieved using the modern quantum chemical method DFT. This article presents a review of the recent research on the effect of CNTs on the mechanical and electrically conductive properties of nanocomposite materials. The outcomes of this study can be important for the development of science and technology in various fields, from fundamental chemistry to applied scientific research.

PMMA dialyzers modulate both humoral and cell-mediate immune response to anti-COVID-19 vaccine (BNT162b2) in a cohort of chronic hemodialyzed patients.

Patients on hemodialysis (HD) have a high risk of death from COVID-19. We evaluated the humoral and cell-mediated immune response to BNT162b2 (Pfizer-BioNTech) vaccine in HD patients, comparing HD with Poly-methyl-methacrylate (PMMA) and HD with Polysulphone (PS). Samples were collected before vaccination (T0) and 14-days after the 2ndvaccine (T2) in a TG (TG, n = 16-Foggia) and in a VG (CG, n = 36-Novara). Anti-SARS-CoV-2-Ig were titrated in the cohort 2-weeks after the 2nddose of vaccine. In the Testing-Group, serum neutralizing antibodies (NAb) were assayed and PBMCs isolated from patients were thawed, counted and stimulated with SARS-CoV-2 IGRA stimulation tube set. All patients had a positive ab-response, except in a case. PMMA-patients had higher levels of anti-SARS-CoV-2 IgG (p = 0.031); VG data confirmed these findings (p < 0.05). NAb evaluation: PMMA patients passed the positive cut-off value, while in PS group only only 1/8 patient did not respond. PMMA patients showed higher percentages of anti-SARS-CoV-2 S1/RBD-Ig after a complete vaccine schedule (p = 0.028). Interferon-gamma release: PMMA patients showed significantly higher release of IFNγ (p = 0.014). The full vaccination course provided sufficient protection against SARS-CoV-2 across the entire cohort, regardless of dialyzer type. After vaccination, PMMA patients show a better immune response, both humoral and cellular, at the end of the vaccination course than PS patients.

Weighted Mostar invariants of chemical compounds: An analysis of structural stability.

The concept of the weighted Mostar invariant is a mathematical tool used in chemical graph theory to study the stability of chemical compounds. Several recent studies have explored the weighted Mostar invariant of various chemical structures, including hydrocarbons, alcohols, and other organic compounds. One of the key advantages of the weighted Mostar invariant is that it can be easily computed for large and complex chemical structures, making it a valuable tool for studying the stability of a wide range of chemical compounds. This notion has been utilized to build novel approaches for forecasting chemical compound stability, such as machine learning algorithms. The focus of the paper is to demonstrate the weighted Mostar indices of three specific nanostructures: silicon dioxide (SIO2, poly-methyl methacrylate network (PMMA(s)), and melem chains (MC(h)). The authors seek to provide the findings of their investigation of these nanostructures using the weighted Mostar invariant.

Synthesis of New Ruthenium Complexes and Their Exploratory Study as Polymer Hybrid Composites in Organic Electronics.

Polymeric hybrid films, for their application in organic electronics, were produced from new ruthenium indanones in poly(methyl methacrylate) (PMMA) by the drop-casting procedure. Initially, the synthesis and structural characterization of the ruthenium complexes were performed, and subsequently, their properties as a potential semiconductor material were explored. Hence hybrid films in ruthenium complexes were deposited using PMMA as a polymeric matrix. The hybrid films were characterized by infrared spectrophotometry and atomic force microscopy. The obtained results confirmed that the presence of the ruthenium complexes enhanced the mechanical properties in addition to increasing the transmittance, favoring the determination of their optical parameters. Both hybrid films exhibited a maximum stress around 10.5 MPa and a Knoop hardness between 2.1 and 18.4. Regarding the optical parameters, the maximum transparency was obtained at wavelengths greater than 590 nm, the optical band gap was in the range of 1.73-2.24 eV, while the Tauc band gap was in the range of 1.68-2.17 eV, and the Urbach energy was between 0.29 and 0.50 eV. Consequently, the above comments are indicative of an adequate semiconductor behavior; hence, the target polymeric hybrid films must be welcomed as convenient candidates as active layers or transparent electrodes in organic electronics.

Antibacterial PVDF Coral-Like Hierarchical Structure Composite Film Fabrication for Self-Cleaning and Radiative Cooling Effect.

Passive radiative cooling (PRC) is a zero-energy-consumption technology that reflects sunlight and radiates heat to cold outer space. In this work, a porous poly(vinylidene fluoride)-poly(methyl methacrylate) (PVDF-PMMA) composite film is fabricated by decorating zinc-imidazolate metal-organic framework (MOF) (ZIF-8) particles obtained by phase inversion. Due to the competent scattering via the coral-like hierarchical structures and the vibration excitations of specific functional groups, the prepared film exhibits good solar reflectance (92.6%) and intermediate infrared emittance (99.1%), with an average sub-ambient cooling of 10.4 °C under a solar radiation intensity of 0.6 AM1.5. Additionally, poly(vinylidene fluoride) has a low surface energy, while the ZIF-8 particles and coral-like hierarchical structures enhance the surface roughness, endowing the surface with significant superhydrophobicity characterized by a water contact angle (WCA) of 157.5° and a sliding angle (SA) of 2°. These films exhibit excellent antibacterial properties. When the content of ZIF-8 particles in the film is 300 mg·L-1, the antibacterial rate reaches 100% after 1 h of treatment. Thus, the ZIF-8 porous poly(vinylidene fluoride)-poly(methyl methacrylate) composite (ZPPP) film has potential application prospects in areas with high health and environmental requirements, such as cold chain transportation and public spaces.

The Effects of Ozone Sterilization on the Chemical and Mechanical Properties of 3D-Printed Biocompatible PMMA.

Since ozone is highly corrosive, it can substantially affect the mechanical and chemical properties of the materials; consequently, it could affect the applicability of those materials in medical applications. The effect of ozone sterilization on the chemical and mechanical properties of additively manufactured specimens of biocompatible poly(methyl-methacrylate) was observed. FDM 3D-printed specimens of biocompatible PMMA in groups of five were exposed to high concentrations of ozone generated by corona discharge for different durations and at different ozone concentrations inside an enclosed chamber with embedded and calibrated ozone, temperature, and humidity sensors. A novel approach using laser-induced fluorescence (LIF) and spark-discharge optical emission spectrometry (SD-OES) was used to determine an eventual change in the chemical composition of specimens. Mechanical properties were determined by testing the tensile strength and Young's modulus. A calibrated digital microscope was used to observe the eventual degradation of material on the surface of the specimens. SD-OES and LIF analysis results do not show any detectable sterilization-caused chemical degradation, and no substantial difference in mechanical properties was detected. There was no detectable surface degradation observed under the digital microscope. The results obtained suggest that ozone sterilization appears to be a suitable technique for sterilizing PMMA medical devices.

Preclinical Evaluation of Bioactive Small Intestinal Submucosa-PMMA Bone Cement for Vertebral Augmentation.

In vertebroplasty and kyphoplasty, bioinert poly(methyl methacrylate) (PMMA) bone cement is a conventional filler employed for quick stabilization of osteoporotic vertebral compression fractures (OVCFs). However, because of the poor osteointegration, excessive stiffness, and high curing temperature of PMMA, the implant loosens, the adjacent vertebrae refracture, and thermal necrosis of the surrounding tissue occurs frequently. This investigation addressed these issues by incorporating the small intestinal submucosa (SIS) into PMMA (SIS-PMMA). In vitro analyses revealed that this new SIS-PMMA bone cement had improved porous structure, as well as reduced compressive modulus and polymerization temperature compared with the original PMMA. Furthermore, the handling properties of SIS-PMMA bone cement were not significantly different from PMMA. The in vitro effect of PMMA and SIS-PMMA was investigated on MC3T3-E1 cells via the Transwell insert model to mimic the clinical condition or directly by culturing cells on the bone cement samples. The results indicated that SIS addition substantially enhanced the proliferation and osteogenic differentiation of MC3T3-E1 cells. Additionally, the bone cement's biomechanical properties were also assessed in a decalcified goat vertebrae model with a compression fracture, which indicated the SIS-PMMA had markedly increased compressive strength than PMMA. Furthermore, it was proved that the novel bone cement had good biosafety and efficacy based on the International Standards and guidelines. After 12 weeks of implantation, SIS-PMMA indicated significantly more osteointegration and new bone formation ability than PMMA. In addition, vertebral bodies with cement were also extracted for the uniaxial compression test, and it was revealed that compared with the PMMA-implanted vertebrae, the SIS-PMMA-implanted vertebrae had greatly enhanced maximum strength. Overall, these findings indicate the potential of SIS to induce efficient fixation between the modified cement surface and the host bone, thereby providing evidence that the SIS-PMMA bone cement is a promising filler for clinical vertebral augmentation.

Machinability and Surface Properties of Cryogenic Poly(methyl methacrylate) Machined via Single-Point Diamond Turning.

Poly(methyl methacrylate) (PMMA), with a glass transition temperature (Tg) over 100 °C, shows good mechanical and optical properties and has broad applications after being machined with single-point diamond turning (SPDT) at room temperature. Because of the high Tg, current efforts mostly focus on optimizing machining parameters to improve workpiece precision without considering the modification of material properties. Cryogenic cooling has been proven to be an effective method in assisting ultra-precision machining for certain types of metals, alloys, and polymers, but has never been used for PMMA before. In this work, cryogenic cooling was attempted during the SPDT of PMMA workpieces to improve surface quality. The machinability and surface properties of cryogenically cooled PMMA were investigated based on the mechanical properties at corresponding temperatures. Nanoindentation tests show that, when temperature is changed from 25 °C to 0 °C, the hardness and Young's modulus are increased by 37% and 22%, respectively. At these two temperature points, optimal parameters including spindle speed, feed rate and cut depth were obtained using Taguchi methods to obtain workpieces with high surface quality. The surface quality was evaluated based on the total height of the profile (Pt) and the arithmetic mean deviation (Ra). The measurement results show that the values of Pt and Ra of the workpiece machined at 0 °C are 124 nm and 6 nm, respectively, while the corresponding values of that machined at 25 °C are 291 nm and 11 nm. The test data show that cryogenic machining is useful for improving the form accuracy and reducing the surface roughness of PMMA. Moreover, the relationship between temperature, material properties and machinability weas established with dynamic mechanical analysis (DMA) data and a theoretical model. This can explain the origin of the better surface quality of the cryogenic material. The basis of this is that temperature affects the viscoelasticity of the polymer and the corresponding mechanical properties due to relaxation. Then, the material property changes will affect surface profile formation during machining. The experimental results and theoretical analysis show that cryogenically cooled PMMA has good machinability and improved surface quality when using SPDT compared to that at ambient temperature.

The effects of antimicrobial photocatalytic nanoparticles on the flexural strength of orthodontic acrylic resins: A systematic review and meta-analysis.

BACKGROUND/PURPOSE: Orthodontic acrylic resins containing antimicrobial photocatalytic nanoparticles aims to reduce oral lesions including denture stomatitis and white spot lesions but they should not imperil its mechanical properties. This systematic review was done to evaluate the effect of various photocatalytic nanoparticles on the flexural strength (FS) of acrylic resins. MATERIALS AND METHODS: We systematically searched the PubMed/Medline, Cochrane Library, and Scopus databases from January 2018 to October 2023. The review was conducted according to the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines, and the quality of the studies was evaluated using the QUIN tool, which is specifically designed to assess the risk of bias in vitro studies. RESULTS: Following screening of 1016 initial records, 23 studies were deemed eligible for inclusion. The addition of photocatalytic nanoparticles, such as emodin (Emo), curcumin (Cur), Cur nisin (CurNis), zeolite/zinc oxide (Zeo/ZnO), and Ulva lactuca (U. lactuca), to acrylic resins resulted in a reduction in FS, with the extent of reduction dependent on the nanoparticle concentration. Specifically, the addition of Emo (≥0.5 %), Cur (≥0.5 %), CurNis (≥5 %), Zeo/ZnO (≥2), and U. lactuca (≥1 %) to acrylic resins significantly decreased FS. Conversely, the inclusion of ZnO and titanium dioxide (TiO2) in acrylic resins improved FS, but higher concentrations (≥5 % for TiO2) had a limited positive effect. CONCLUSION: Our study supports the use of low concentrations of photocatalytic nanoparticles, such as ZnO (≤2 %), TiO2 (≤3 %), Emo (≤0.5 %), Cur (≤0.5 %), CurNis (≤5 %), and U. lactuca (≤1 %), in orthodontic acrylic resins without compromising FS.

Polymeric Electronic Shielding Layer Enabling Superior Dendrite Suppression for All-Solid-State Lithium Batteries.

LiBH4 is one of the most promising candidates for use in all-solid-state lithium batteries. However, the main challenges of LiBH4 are the poor Li-ion conductivity at room temperature, excessive dendrite formation, and the narrow voltage window, which hamper practical application. Herein, we fabricate a flexible polymeric electronic shielding layer on the particle surfaces of LiBH4. The electronic conductivity of the primary LiBH4 is reduced by 2 orders of magnitude, to 1.15 × 10-9 S cm-1 at 25 °C, due to the high electron affinity of the electronic shielding layer; this localizes the electrons around the BH4- anions, which eliminates electronic leakage from the anionic framework and leads to a 68-fold higher critical electrical bias for dendrite growth on the particle surfaces. Contrary to the previously reported work, the shielding layer also ensures fast Li-ion conduction due to the fast-rotational dynamics of the BH4- species and the high Li-ion (carrier) concentration on the particle surfaces. In addition, the flexibility of the layer guarantees its structural integrity during Li plating and stripping. Therefore, our LiBH4-based solid-state electrolyte exhibits a high critical current density (11.43 mA cm-2) and long cycling stability of 5000 h (5.70 mA cm-2) at 25 °C. More importantly, the electrolyte had a wide operational temperature window (-30-150 °C). We believe that our findings provide a perspective with which to avoid dendrite formation in hydride solid-state electrolytes and provide high-performance all-solid-state lithium batteries.

Poly(methyl methacrylate) in Orthopedics: Strategies, Challenges, and Prospects in Bone Tissue Engineering.

Poly(methyl methacrylate) (PMMA) is widely used in orthopedic applications, including bone cement in total joint replacement surgery, bone fillers, and bone substitutes due to its affordability, biocompatibility, and processability. However, the bone regeneration efficiency of PMMA is limited because of its lack of bioactivity, poor osseointegration, and non-degradability. The use of bone cement also has disadvantages such as methyl methacrylate (MMA) release and high exothermic temperature during the polymerization of PMMA, which can cause thermal necrosis. To address these problems, various strategies have been adopted, such as surface modification techniques and the incorporation of various bioactive agents and biopolymers into PMMA. In this review, the physicochemical properties and synthesis methods of PMMA are discussed, with a special focus on the utilization of various PMMA composites in bone tissue engineering. Additionally, the challenges involved in incorporating PMMA into regenerative medicine are discussed with suitable research findings with the intention of providing insightful advice to support its successful clinical applications.

Exploring the Molecular Origin for the Long-Range Propagation of the Substrate Effect in Unentangled Poly(methyl methacrylate) Films.

The polymer/substrate interface plays a significant role in the dynamics of nanoconfined polymers because of its suppression on polymer mobility and its long-range propagation feature, while the molecular origin of the long-range substrate effect in unentangled polymer material is still ambiguous. Herein, we investigated the propagation distances of the substrate effect (h*) by a fluorinated tracer-labeled method of two unentangled polymer films supported on silicon substrates: linear and ring poly(methyl methacrylate) films with relatively low molecular weights. The results indicate that the value of h* has a molecular weight dependence of h*∝N (N is the degree of polymerization) in the unentangled polymer films, while h*∝N1/2 was presented as previously reported in the entangled films. A theoretical model, depending on the polymer/polymer intermolecular interaction, was proposed to describe the above long-range propagation behavior of the substrate effect and agrees with our experiment results very well. From the model, it revealed that the intermolecular friction determines the long-range propagation of the substrate effect in the unentangled system, but the intermolecular entanglement is the dominant role in entangled system. These results give us a deeper understanding of the long-range substrate effect.

Surface, mechanical and chemical properties of modified denture resin using natural biopolymer.

Objective: This laboratory study determined the surface, mechanical and chemical properties of polymethyl methacrylate (PMMA) denture resin reinforced with micron-sized Gum Arabic (GA) powder in different weight ratios. Methods: This laboratory study was conducted at the Dental Health Department of the College of Applied Medical Sciences, King Saud University, Riyadh, Saudi Arabia from November 2022 to February 2023. Three experimental denture resins were prepared by incorporating GA powder in heat-polymerized PMMA powder using different wt.% (5, 10, and 20 wt.%). While pristine PMMA served as the control group. A total of ten bar-shaped specimens with dimensions of 65 mm × 10 mm × 3.5 mm were prepared for each study group. The surface properties (micro CT and SEM evaluation), mechanical properties (Nanohardness, elastic modulus and flexural strength) and chemical properties (FTIR) were conducted. The data were statistically analyzed using the one-way analysis of variance and Tukey's post hoc tests (p<0.05). Results: The surface and bulk properties of experimental GA-reinforced PMMA resin materials deteriorated while the mechanical properties were also negatively altered using GA-based PMMA denture resin. A linear correlation was observed between weak mechanical properties and increasing wt.% of GA in denture resin. Conclusions: The incorporation of GA powder in denture resin might not be a viable option. The surface and mechanical properties of experimental PMMA composites were adversely affected compared to the control group.

Composition-Dependent Protein-Material Interaction of Poly(Methyl Methacrylate-co-styrene) Nanoparticle Series.

Polymer nanoparticles continue to be of high interest in life science applications. Still, adsorption processes occurring in protein-containing media and their implications for biological responses are not generally predictable. Here, the effect of nanoparticle composition on the adsorption of bovine serum albumin (BSA), fibronectin (FN) and immunoglobulin G (IgG) as structurally and functionally different model proteins was explored by systematically altering the composition of poly(methyl methacrylate-co-styrene) nanoparticles with sizes in a range of about 550 nm. As determined by protein depletion from the suspension medium via a colorimetric assay, BSA and IgG adsorbed at similar quantities, while FN reached larger masses of adsorbed protein (up to 0.4 ± 0.06 µg·cm-2 BSA, 0.42 ± 0.09 µg·cm-2 IgG, 0.72 ± 0.04 µg·cm-2 FN). A higher content of styrene as the more hydrophobic polymer component enhanced protein binding, which suggests a contribution of hydrophobic interactions despite the particles exhibiting strongly negatively charged surfaces with zeta potentials of -44 to -52 mV. The quantities of adsorbed proteins were estimated to correspond to a confluent surface coverage. Overall, this study illustrated how protein binding can be controlled by systematically varying the nanoparticle bulk composition and may serve as a basis for establishing interfaces with a targeted level of protein retention and/or presentation.

Assessment of Polydopamine to Reduce Streptococcus mutans Adhesion to a Dental Polymer.

Bacterial adhesion to the surface of materials is the first step in biofilm formation, which will lead to conditions that may compromise the health status of patients. Recently, polydopamine (PDA) has been proposed as an antibacterial material. Therefore, the objective of the current work was to assess and compare the adhesion of Streptococcus mutans to the surface of poly(methyl methacrylate) (PMMA) discs that were modified using PDA following a biomimetic approach versus smooth PDA-coated PMMA surfaces. In addition, an assessment of the growth inhibition by PDA was performed. PMMA discs were manufactured and polished; soft lithography, using the topography from the Crocosmia aurea leaf, was used to modify their surface. PDA was used to smooth-coat PMMA discs by dip-coating. The growth inhibition was measured using an inhibition halo. The surfaces were characterized by means of atomic force microscopy (AFM), the contact angle (CA), and Fourier-transform infrared spectroscopy (FTIR). Polydopamine exhibited a significant antibacterial effect when used directly on the S. mutans planktonic cells, but such an effect was not as strong when modifying the PMMA surfaces. These results open the possibility of using polydopamine to reduce the adhesion and growth of S. mutans, which might have important consequences in the dental field.

3D interconnected porous PMMA scaffold integrating with advanced nanostructured CaP-based biomaterials for rapid bone repair and regeneration.

Bioactive scaffolds with polymer and nanostructured bioactive glass-based composites are promising materials for regenerative applications in consequence of close mimics of natural bone composition. Poly methyl methacrylate (PMMA) is a highly preferred thermoplastic polymer for orthopedic applications as it has good biocompatibility. Different kinds of bioactive, biodegradable as well as biocompatible biomaterial composites such as Bioglass (BG), Hydroxyapatite (Hap), and Tricalcium phosphate (TCP) can be integrated with PMMA, so as to augment the bioactivity, porosity as well as regeneration of hard tissues in human body. Among the bioactive glass, 60S BG (Bioactive glass with 60 percentage of Silica without Sodium ions) is better materials among aforementioned systems owning to mechanical stability as well as controlled bioactive material. In this work, the fabrication of PMMA-CaP (calcium phosphate)-based scaffolds were carried out by Thermal Induced Phase Separation method (TIPS). X-ray diffractogram analysis (XRD) is used to examine the physiochemical properties of the scaffolds that evidently reveal the presence of calcium phosphate besides calcium phosphate silicate phases. The Field Emission Scanning Electron Microscopy (FESEM) studies obviously exhibited the microstructure of the scaffolds as well as their interconnected porous morphology. The PMMA/60S BG/TCP (C50) scaffold has the maximum pore size, measuring 77 ± 23 µm, while the average pore size ranges from 50 ± 20 to 80 ± 23 µm. By performing a liquid displacement method, the C50 scaffold is found to have the largest porosity of 50%, high hydrophilicity of 118.16°, and a compression test reveals the scaffolds to have a maximum compressive strength of 0.16 MPa. The emergence of bone-like apatite on the scaffold surface after 1st and 21st days of SBF immersion is further supported by in vitro bioactivity studies. Cytocompatibility and hemocompatibility analyses undoubtedly confirmed the biocompatibility behavior of PMMA-based bioactive scaffolds. Nano-CT investigation demonstrates that PMMA-CaP scaffolds provide more or less alike morphologies of composites that resemble the natural bone. Therefore, this combination of scaffolds could be considered as potential biomaterials for bone regeneration application. This detailed study promisingly demonstrates the eminence of the unique scaffolds in the direction of regenerative medicines.

Direct deep UV lithography to micropattern PMMA for stem cell culture.

Microengineering is increasingly being used for controlling the microenvironment of stem cells. Here, a novel method for fabricating structures with subcellular dimensions in commonly available thermoplastic poly(methyl methacrylate) (PMMA) is shown. Microstructures are produced in PMMA substrates using Deep Ultraviolet lithography, and the effect of different developers is described. Microgrooves fabricated in PMMA are used for the neuronal differentiation of mouse embryonic stem cells (mESCs) directly on the polymer. The fabrication of 3D, curvilinear patterned surfaces is also highlighted. A 3D multilayered microfluidic chip is fabricated using this method, which includes a porous polycarbonate (PC) membrane as cell culture substrate. Besides directly manufacturing PMMA-based microfluidic devices, an application of the novel approach is shown where a reusable PMMA master is created for replicating microstructures with polydimethylsiloxane (PDMS). As an application example, microchannels fabricated in PDMS are used to selectively expose mESCs to soluble factors in a localized manner. The described microfabrication process offers a remarkably simple method to fabricate for example multifunctional topographical or microfluidic culture substrates outside cleanrooms, thereby using inexpensive and widely accessible equipment. The versatility of the underlying process could find various applications also in optical systems and surface modification of biomedical implants.

Synthesis, electrospinning, and molecular docking of poly(methyl methacrylate) Schiff bases and their applications as polymeric antimicrobial agents and for dye removal.

The antibacterial activity of a variety of modified poly(methyl methacrylate) Schiff bases against common microbial infections and removal of methylene blue (MB) dye were screened. The Schiff bases were synthesized from the reaction of the modified (PMMA) with vanillin (PMMA)Van and cinnamaldehyde (PMMA)Cin. By using Fourier transformer infrared (FT-IR), X-ray diffraction analysis (XRD), thermogravimetric analysis (TGA), and scanning electron microscopy (SEM), the structures of the nanofibers of the synthesized Schiff bases were confirmed. The modified Kirky-Bauer method was used to screen the antibacterial activities of all the obtained materials against various bacterial species, including gram-positive bacterial (Bacillus subtilis (4k1p), Staphylococcus aureus), Gram-negative bacteria (Escherichia coli (7ab3), Pseudomonas aeruginosa). Inhibition zones against gram-positive bacteria ranged in diameter from 7 to 14 mm, whereas for the Gram-negative bacteria, the inhibition zones found to be ranged between 6 and 13 mm. With a minimum bactericidal concentration (MBC) of 8 mg/mL and a minimum inhibitory concentration (MIC) of 2 mg/mL, (PMMA)Van shown the greatest antibacterial activity. Lastly, molecular docking research was done to better understand the interactions between this series' targets and inhibitors for (PMMA)Van and (PMMA)Cin (4k1p and 7ab3). Molecular modeling of these surface-adsorbed polymers indicated that (PMMA)Van binds more strongly with Nitrogen than does (PMMA)Cin through extra hydrogen-bonding interactions. All the developed materials were evaluated for the removal of 0.1 g/L methylene blue dye (MB) from an aqueous solution. The elimination percentage of MB dye ranged from 26.67% by using 0.05 g powder of (PMMA)Cin to 85.63% by employing 0.05 g nanofibers of (PMMA)Van.

Embedded 3D printing and pressurized thermo-curing of PMMA for medical implants.

Poly (methyl methacrylate) (PMMA) is a synthetic polymer commonly used for medical implants in cranioplasty and orthopedic surgery owing to its excellent mechanical properties, optical transparency, and minimal inflammatory responses. Recently, the development of 3D printing opens new avenues in the fabrication of patient-specific PMMA implants for personalized medicine. However, challenges are confronted when adapting medical-grade PMMA to the 3D printing process due to its dynamic viscosity and nonself-supporting characteristics before cured. In addition, the intrinsically exothermic polymerization of MMA brings about bubble generation issues that reduce its mechanical performance harshly. Therefore, in this study, an embedded 3D printing methodology followed by pressurized thermo-curing is proposed and developed: a granular alginate microgel is designed for serving as a supporting matrix when jamming formed between the granules to structurally support the extruded precursor filaments of PMMA-MMA ink during both 3D printing and post-curing; moreover, the autoclave reactor enclosing the alginate matrix and as-sculpted PMMA structures is utilized to generate temperature-dependent pressure, which serves for suppressing the bubbles and solidifying the polymerized MMA during the post-curing process. The 3D printed PMMA is comparably matchable to traditional PMMA castings in terms of their microstructures, density, thermal properties, mechanical performance and biocompatibility. In the future, the proposed embedded 3D printing platform combined with the special post-curing method has great potential for a customized and cost-effective fabrication of patient-specific, complex and functional PMMA implants.