Photochemical fate of nonionic polyacrylamide induced by hydroxyl radicals in the natural water: Mineralization mechanism exploration and half-life time evaluation.

Water-soluble polyacrylamide (PAM) compounds have been used extensively in various sectors. The abundance of PAM in the environment raises concerns about its environmental impact. However, the mineralization of PAM in water under natural light irradiation remains insufficiently explored. This study utilizes nonionic PAM (nPAM) as a representative model to investigate both the mechanism and efficiency of nPAM degradation in water when exposed to ultraviolet (UV) light with hydrogen peroxide (H2O2) as the hydroxyl radical source. In the dark or with only UVA irradiation, negligible mineralization of nPAM occurred. In contrast, the presence of hydroxyl radicals (produced by the UVA/H2O2 system) produced 50 % nPAM mineralization over 7 days under our experimental conditions. The corresponding molecular weight (MW) of the nPAM was swiftly reduced from 1.58 ×106 Da to 1.59 ×103 Da in 3 days. Moreover, five carboxylic acids and nitrate ions were identified as the photodegradation intermediates of nPAM. The efficiencies of nPAM photodegradation by the UVA/H2O2 system in different natural waters and environmental conditions were assessed. The rate constant for the reaction between the hydroxyl radical and nPAM was 2.17 ×109 M-unit-1 s-1. The half-lives of nPAM in the sea and continental surface waters were determined to be several years and dozens of days, respectively. The application of UVB obviously accelerated the mineralization of nPAM in ultrapure water (71 % degradation in 7 days). Moreover, mineralization of concentrated nPAM (200 mg/L) in sea water was more efficient when both UVA- and UVB-activated H2O2 were used. Additionally, toxic acrylamide was not generated during nPAM photodegradation. Moreover, the photodegradation intermediates from nPAM were found to be neither acutely nor chronically toxic to aquatic organisms. This comprehensive study sheds light on the photochemical fate of nPAM in natural waters and provides essential insight for practical treatment of PAM in water systems.

Filler found in bone: Surgical removal of polyacrylamide hydrogel (Amazingel) from the mandible after 24 years: A case report and literature review.

Polyacrylamide hydrogel (PAAG) is widely regarded as a safe soft tissue filler and has been extensively utilized for cosmetic enhancements, such as breast and facial augmentation in China from 1997 until its ban in 2006. Common complications associated with its use include inflammation, infection, granulomas, fibrosis, gel migration, and facial and soft tissue deformities. This case report describes a 45-year-old Chinese woman who experienced PAAG migration into her mandible 24 years after facial augmentation, causing irritation of the mandibular alveolar nerve - apparently the first documented instance of this occurrence. Surgical intervention was necessary to remove the migrated gel and associated calcifications. A literature review explored adverse events and management strategies for PAAG complications in cosmetic procedures. While generally considered safe, this report underscores the importance of meticulous injection techniques and careful anatomical site selection to prevent such severe complications.

Enhanced sludge dewatering using a novel synergistic iron/peroxymonosulfate-polyacrylamide method.

In the sludge dewatering process, a formidable challenge arises due to the robust interactions between extracellular polymeric substances (EPS) and bound water. This study introduces a novel, synergistic conditioning method that combines iron (Fe2+)/peroxymonosulfate (PMS) and polyacrylamide (PAM) to significantly enhance sludge dewatering efficiency. The application of the Fe2+/PMS-PAM conditioning method led to a substantial reduction in specific filtration resistance (SFR) by 82.75% and capillary suction time (CST) by 80.44%, marking a considerable improvement in dewatering performance. Comprehensive analyses revealed that pre-oxidation with Fe2+/PMS in the Fe2+/PMS-PAM process effectively degraded EPS, facilitating the release of bound water. Subsequently, PAM enhanced the flocculation of fine sludge particles resulting from the advanced oxidation processes (AOPs). Furthermore, analysis based on the Extended Derjaguin-Landau-Verwey-Overbeek (XDLVO) theory demonstrated shifts in interaction energies, highlighting the breakdown of energy barriers within the sludge and a transition in surface characteristics from hydrophilic (3.79 mJ m-2) to hydrophobic (-61.86 mJ m-2). This shift promoted the spontaneous aggregation of sludge particles. The innovative use of the Flory-Huggins theory provided insights into the sludge filtration mechanism from a chemical potential perspective, linking these changes to SFR. The introduction of Fe2+/PMS-PAM conditioning disrupted the uniformity of the EPS-formed gel layer, significantly reducing the chemical potential difference between the permeate and the water in the gel layer, leading to a lower SFR and enhanced dewatering performance. This thermodynamic approach significantly enhances our understanding of sludge dewatering and conditioning. These findings represent a paradigm shift, offering innovative strategies for sludge treatment and expanding our comprehension of dewatering and conditioning techniques.

Extraction of Proteins from Municipal Wastewater and Activated Sludge.

Wastewater treatment plants (WWTPs) are the main barrier to cope with the increased pressure of municipal and industrial wastewater on natural water resources in terms of both polluting load and produced volumes. For this reason, WWTP's efficiency should be the highest; thus, their monitoring becomes critical. In conventional WWTPs, biodegradation of pollutants mainly occurs in the biological reactors, and an increasing interest in a deeper characterization of the biomasses involved in these processes (made of biofilms, granules, and suspended activated sludge) rose up in recent years. In this sense, the meta-omics approaches were recently developed to investigate the entire set of biomolecules of a given class in a microbial community with the same general objective: the identification of the biomolecules through the sequence similarity of high degree in the already available databases. Particularly, metaproteomics concerns the identification of all proteins in a microbial community in a given moment or condition. In this chapter, a protocol for the extraction and separation of proteins from activate sludge sampled at WWTPs is proposed.

High-Temperature-Resistant Profile Control System Formed by Hydrolyzed Polyacrylamide and Water-Soluble Phenol-Formaldehyde Resin.

To realize the effective profile control of a heavy oil reservoir, hydrolyzed polyacrylamide (HPAM) and water-soluble phenol-formaldehyde resin (PR) were chosen to prepare the profile control system, which gelled at medium or low temperatures and existed stably at high temperatures in the meantime. The effects of phenolic ratios, PR concentration, and HPAM concentration on the formation and strength of the gels were systematically studied by the gel-strength code method and rheological measurements. And the microstructure of the gels was investigated by scanning electron microscope measurements. The results showed that the gelling time of the HPAM-PR system was 13 h at 70 °C. The formed gel could stay stable for 90 days at 140 °C. In addition, the gels showed viscoelastic properties, and the viscosity reached 18,000 mPa·s under a 1.5 s-1 shearing rate due to their three-dimensional cellular network structure. The formation of the gels was attributable to the hydroxyl groups of the PR crosslinking agent, which could undergo the dehydration condensation reaction with amide groups under non-acidic conditions and form intermolecular crosslinking with HPAM molecules. And the organic crosslinker gel system could maintain stability at higher temperatures because covalent bonds formed between molecules.

High-quality Agar and Polyacrylamide Tumor-mimicking Phantom Models for Magnetic Resonance-guided Focused Ultrasound Applications.

Background: Tissue-mimicking phantoms (TMPs) have been used extensively in clinical and nonclinical settings to simulate the thermal effects of focus ultrasound (FUS) technology in real tissue or organs. With recent technological developments in the FUS technology and its monitoring/guided techniques such as ultrasound-guided FUS and magnetic resonance-guided FUS (MRgFUS) the need for TMPs are more important than ever to ensure the safety of the patients before being treated with FUS for a variety of diseases (e.g., cancer or neurological). The purpose of this study was to prepare a tumor-mimicking phantom (TUMP) model that can simulate competently a tumor that is surrounded by healthy tissue. Methods: The TUMP models were prepared using polyacrylamide (PAA) and agar solutions enriched with MR contrast agents (silicon dioxide and glycerol), and the thermosensitive component bovine serum albumin (BSA) that can alter its physical properties once thermal change is detected, therefore offering real-time visualization of the applied FUS ablation in the TUMPs models. To establish if these TUMPs are good candidates to be used in thermoablation, their thermal properties were characterized with a custom-made FUS system in the laboratory and a magnetic resonance imaging (MRI) setup with MR-thermometry. The BSA protein's coagulation temperature was adjusted at 55°C by setting the pH of the PAA solution to 4.5, therefore simulating the necrosis temperature of the tissue. Results: The experiments carried out showed that the TUMP models prepared by PAA can change color from transparent to cream-white due to the BSA protein coagulation caused by the thermal stress applied. The TUMP models offered a good MRI contrast between the TMPs and the TUMPs including real-time visualization of the ablation area due to the BSA protein coagulation. Furthermore, the T2-weighted MR images obtained showed a significant change in T2 when the BSA protein is thermally coagulated. MR thermometry maps demonstrated that the suggested TUMP models may successfully imitate a tumor that is present in soft tissue. Conclusion: The TUMP models developed in this study have numerous uses in the testing and calibration of FUS equipment including the simulation and validation of thermal therapy treatment plans with FUS or MRgFUS in oncology applications.

Synthesis of bimetallic oxides (SrO-CoO) nanoparticles decorated polyacrylamide hydrogels for controlled drug release and wound healing applications.

Hydrogels are polymeric structures characterized by their three-dimensional nature, insolubility in aqueous media, and remarkable ability to absorb significant amounts of water. Owing to their exceptional biocompatibility with living tissues, hydrogels find extensive use in various biomedical applications. Guggul gum grafted polyacrylamide hydrogels (SG) were prepared and green synthesized SrO, CoO and SrO-CoO nanoparticles (NPs) were incorporated with hydrogels (SrG, CoG, Sr-CoG) respectively. The fabricated hydrogels were characterized by various analytical techniques such as FTIR, XRD and SEM. XRD results confirmed the presence of Sr and Co metal nanoparticles in the fabricated hydrogels matrix, SrG pattern showed diffraction peaks at 2θ = 30°, 36.59°, 44.11°, 50.22° and 62.20° while CoG peaks appeared at 2θ = 36.59°, 42.32°, 61.18°, 74.05° and 77.08°. SG, SrG, CoG and Sr-CoG hydrogels showed 11%, 32%, 23% and 45% radical scavenging activity respectively as compared to standard BHT (Butylated hydroxyl toluene). In vitro drug release tests results showed that SG, SrG, CoG and Sr-CoG exhibited 21%, 16%, 13% and 10% sustained release of naproxen respectively. The results revealed that SrO and CoO nanoparticles dopped hydrogels possessed good wound healing potential as compared to conventional hydrogels, which provides great potential in clinical treatment for wounds.

Evaluation of microwave irradiated Polyacrylamide grafted Opuntia leaf mucilage graft copolymer (OPM-g-PAM) as effective controlled release polymer for release of Rosuvastastin as model drug.

Controlled drug delivery systems offer numerous advantages. This research evaluates Opuntia leaf mucilage grafted with polyacrylamide (OPM-g-PAM) as a promising controlled-release polymer. PAM chains were grafted onto the backbone of OPM using a microwave-assisted method. Optimization of the best grade was based on % grafting efficiency and intrinsic viscosity, followed by extensive physical and analytical characterizations. Analytical characterizations revealed semicrystalline nature of the biomaterial. SEM and AFM observations revealed rough and porous surfaces, indicating effective grafting. Swelling behavior showed maximum sensitivity at pH 7, with reduced swelling at higher sodium chloride concentrations. A comparative study of % drug release of Rosuvastatin over 24 h showed that the optimized grade controlled drug release effectively, achieving 78.5 % release compared to 98.8 % for GF-3. The release data fitted the Korsmeyer-Peppas model, with an "n" value of 0.8334, indicating non-Fickian (anomalous) diffusion. Bacterial biodegradability studies confirmed the high biodegradability of the graft copolymer. In vitro acute toxicity tests showed no toxicity, as confirmed by histopathological studies of heart, liver, and kidney. Overall, the results indicate that OPM-g-PAM is a highly promising material for use in drug delivery systems, demonstrating potential as a novel controlled-release polymer.

The Influence of Citrus Pectin and Polyacrylamide Modified with Plant-Derived Additives on the Properties of α-TCP-Based Bone Cements.

Materials based on highly reactive α-tricalcium phosphate (α-TCP) powder were developed and evaluated. Furthermore, the impact of different polymeric additives, such as citrus pectin or polyacrylamide (PAAM) modified with sago starch, neem flower, or rambutan peel, on the physiochemical and biological properties of the developed materials was assessed. The addition of modified PAAM shortened the setting process of bone cements and decreased their compressive strength. On the other hand, the addition of citrus pectin significantly enhanced the mechanical strength of the material from 4.46 to 7.15 MPa. The improved mechanical properties of the bone cement containing citrus pectin were attributed to the better homogenization of cementitious pastes and pectin cross-linking by Ca2+ ions. In vitro tests performed on L929 cells showed that 10% extracts from α-TCP cements modified with pectin are more cytocompatible than control cements without any additives. Cements containing PAAM with plant-derived modifiers show some degree of cytotoxicity for the highly concentrated 10% extracts, but for diluted extracts, cytotoxicity was reduced, as shown by a resazurin reduction test and live/dead staining. All the developed bone substitutes exhibited in vitro bioactivity, making them promising candidates for further biological studies. This research underscores the advantageous properties of the obtained biomaterials and paves the way for subsequent more advanced in vitro and in vivo investigations.

Rationally designed ß-cyclodextrin-crosslinked polyacrylamide hydrogels for cell spheroid formation and 3D tumor model construction.

In vitro tumor models are essential for understanding tumor behavior and evaluating tumor biological properties. Hydrogels that can mimic the tumor extracellular matrix have become popular for creating 3D in vitro tumor models. However, designing biocompatible hydrogels with appropriate chemical and physical properties for constructing tumor models is still a challenge. In this study, we synthesized a series of ß-cyclodextrin (ß-CD)-crosslinked polyacrylamide hydrogels with different ß-CD densities and mechanical properties and evaluated their potential for use in 3D in vitro tumor model construction, including cell capture and spheroid formation. By utilizing a combination of ß-CD-methacrylate (CD-MA) and a small amount of N,N'-methylene bisacrylamide (BIS) as hydrogel crosslinkers and optimizing the CD-MA/BIS ratio, the hydrogels performed excellently for tumor cell 3D culture and spheroid formation. Notably, when we co-cultured L929 fibroblasts with HeLa tumor cells on the hydrogel surface, co-cultured spheroids were formed, showing that the hydrogel can mimic the complexity of the tumor extracellular matrix. This comprehensive investigation of the relationship between hydrogel mechanical properties and biocompatibility provides important insights for hydrogel-based in vitro tumor modeling and advances our understanding of the mechanisms underlying tumor growth and progression.

Metal Ion-Induced Acid Hydrolysis Strategy for the One-Step Synthesis of Tough and Highly Transparent Hydrolyzed Polyacrylamide Hydrogels.

Polyacrylamide (PAM) hydrogel is hard to enhance through coordination bonds because amide groups rarely coordinate with metal ions strongly in an aqueous solution. It is known that the aqueous solution of ZrOCl2.8H2O can be strongly acidic depending on its concentration. Consequently, through a facile one-step metal ion-induced acid hydrolysis strategy (MIAHS), tough and highly transparent hydrolyzed PAM physical hydrogels are prepared by using ZrOCl2.8H2O in this work. The formation of the partially hydrolyzed PAM physical hydrogels elucidates that the side reaction of imidization during common acid hydrolysis of PAM can be perfectly overcome because the structure of the Zr(IV) ion and its interaction with amide groups promote selective acidic hydrolysis from amide to carboxyl groups. Compared to most coordination cross-linked hydrogels, which need at least two-step fabrication, the hydrolyzed PAM hydrogel via MIAHS can be obtained by one-step synthesis due to the weak interaction between amide groups and Zr(IV). The obtained PAM hydrogel cross-linked by hydrogen bonds and coordination bond between Zr(IV) and carboxyl is a multibond network (MBN) and can achieve hierarchical energy dissipation, which exhibits excellent mechanical properties (tensile strength of 3.15 MPa, elongation at break of 890%, and toughness of 17.0 MJ m-3), high transparence (transmittance of 95%), and outstanding conductivity (5.6 S m-1) at water content of 80 wt %. The high gauge factor (from 2.24 to 12.8 as the strain increases from 0 to 400%) endows the hydrolyzed PAM hydrogels with promising application as strain sensors. Furthermore, in addition to ZrOCl2.8H2O, the fact that various hydrolyzable compounds of Ti(IV), Zr(IV) Hf(IV), and Sn(IV) can also fabricate tough hydrolyzed PAM hydrogels verifies the universality of MIAHS. Therefore, the simple, efficient, and universal MIAHS will shed new light on preparing functional PAM-based hydrogels.

Design and construction of high strength double network hydrogel with flow-induced orientation.

The design and construction of high strength hydrogels is a widely discussed topic in hydrogel research. In this study, we combined three toughening strategies, including dual network, oriented structure construction and nanophase doping, to develop an alginate/polyacrylamide (PAM)/modified titanium dioxide fiber (TiO2 NF@PAM) dual network composite hydrogel prepared via syringe. The effects of different preparation methods, AM/Alginate ratios, inorganic doping phases and TiO2 NF@PAM/AM ratios on the mechanical properties of composite hydrogels were investigated. The study found that the alginate hydrogel prepared by syringe exhibited superior axial orientation and achieved a tensile strength of (1091 ± 46) kPa. And the composite hydrogel doped with 0.2 wt% TiO2 NF@PAM had a tensile strength of (1006 ± 64) kPa, which was higher than that of the composite hydrogel doped with 0.2 wt% TiO2 nanoparticles (976 ± 66) kPa. The highest tensile strength (1120 ± 67) kPa and elongation at break (182 ± 8) % were achieved when the ratio of TiO2 NF@PAM/AM was 0.6 wt%. The force applied to the gel solution in the syringe affects the orientation of the polymer chains and TiO2 NF@PAM within the gel, which subsequently impacts the mechanical properties of the hydrogel. Therefore, we further investigated the mechanical properties of composite hydrogels under varying propulsion speeds, syringe diameters, and syringe lengths. It was observed that the gel solution's shear strength increased as the syringe diameter decreased. The resulting composite hydrogels were better oriented and had improved mechanical properties. The composite hydrogels' tensile strength peaked at (1117 ± 47) kPa when the syringe advance rate was between 1-7 mL/min. The mechanical properties of the hydrogels were optimal when the syringe length was 30 mm, with a maximum tensile strength of (1131 ± 67) kPa and a tensile ratio of (166 ± 5) %. This study demonstrates the viability of integrating three distinct strengthening methodologies to generate hydrogels of considerable strength. Furthermore, the Alginate/PAM/TiO2 NF@PAM composite hydrogels possess remarkable potential as adaptable, wearable sensors due to their exemplary mechanical properties, knittability, and conductivity.

Mechanobiological Modulation of In Vitro Astrocyte Reactivity Using Variable Gel Stiffness.

After traumatic brain injury, the brain extracellular matrix undergoes structural rearrangement due to changes in matrix composition, activation of proteases, and deposition of chondroitin sulfate proteoglycans by reactive astrocytes to produce the glial scar. These changes lead to a softening of the tissue, where the stiffness of the contusion "core" and peripheral "pericontusional" regions becomes softer than that of healthy tissue. Pioneering mechanotransduction studies have shown that soft substrates upregulate intermediate filament proteins in reactive astrocytes; however, many other aspects of astrocyte biology remain unclear. Here, we developed a platform for the culture of cortical astrocytes using polyacrylamide (PA) gels of varying stiffness (measured in Pascal; Pa) to mimic injury-related regions in order to investigate the effects of tissue stiffness on astrocyte reactivity and morphology. Our results show that substrate stiffness influences astrocyte phenotype; soft 300 Pa substrates led to increased GFAP immunoreactivity, proliferation, and complexity of processes. Intermediate 800 Pa substrates increased Aggrecan+, Brevican+, and Neurocan+ astrocytes. The stiffest 1 kPa substrates led to astrocytes with basal morphologies, similar to a physiological state. These results advance our understanding of astrocyte mechanotransduction processes and provide evidence of how substrates with engineered stiffness can mimic the injury microenvironment.

Hydrophobic association-improved multi-functional hydrogels with liquid metal droplets stabilized by xanthan gum and PEDOT:PSS for strain sensors.

The synthesis of liquid metal-infused hydrogels, typically constituted by polyacrylamide networks crosslinked through covalent bonds, often encounters a conundrum: they exhibit restricted extensibility and a diminished capacity for self-repair, owing to the inherently irreversible nature of the covalent linkages. This study introduces a hydrophobically associated hydrogel embedding gallium (Ga)-droplets, realized through the in situ free radical copolymerization of hydrophobic hexadecyl methacrylate (HMA) and hydrophilic acrylamide (AM) in a milieu containing xanthan gum (XG) and PEDOT:PSS, which co-stabilizes the Ga-droplets. The Ga-droplets, synergistically functioning as conductive agents alongside PEDOT:PSS, also expedite the hydrogel's formation. The resultant XG/PEDOT:PSS-Ga-P(AM-HMA) hydrogel is distinguished by its remarkable extensibility (2950 %), exceptional toughness (3.28 MJ/m3), superior adherence to hydrophobic, smooth substrates, and an innate ability for hydrophobic-driven self-healing. As a strain sensing medium, this hydrogel-based sensor exhibits heightened sensitivity (gauge factor = 12.66), low detection threshold (0.1 %), and robust durability (>500 cycles). Furthermore, the inclusion of glycerol endows the XG/PEDOT:PSS-Ga-P(AM-HMA) hydrogel with anti-freezing properties without compromising its mechanical integrity and sensing acumen. This sensor adeptly captures a spectrum of human movements, from the nuanced radial pulse to extensive joint articulations. This research heralds a novel approach for fabricating multifaceted PAM-based hydrogels with toughness and superior sensing capabilities.

Aqueous AlCl3/ZnCl2 solution room-induced the self-growing strategy of expanded topological network for cellulose/polyacrylamide-based solid-state electrolytes.

The green synthesis strategy for cellulose-containing hydrogel electrolytes is significant for effectively managing resources, energy, and environmental concerns in the contemporary world. Herein, we propose an all-green strategy using AlCl3/ZnCl2/H2O solvent to create cellulose/polyacrylamide-based hydrogel (AZ-Cel/PAM) with expanded hierarchical topologies. The aqueous AlCl3/ZnCl2 facilitates the efficient dissolution of cellulose at room temperature, and the dispersed Al3+-Zn2+ ions autocatalytic system catalyzes in-situ polymerization of acrylamide (AM) monomer. This expands the AM network within the cellulose framework, forming multiple bonding interactions and stable ion channels. The resulting hybrid hydrogel exhibits improved mechanical properties (tensile strength of 56.54 kPa and compressive strength of 359.43 kPa) and enhanced ionic conductivity (1.99 S/m). Furthermore, it also demonstrates excellent adhesion, freeze resistance (-45 °C), and water retention capabilities. Quantum simulations further clarify the mechanical composition and ion transport mechanism of AZ-Cel/PAM hydrogels. The assembled supercapacitor with the hydrogel electrolyte, demonstrates an ideal area-specific capacitance of 203.80 mF/cm2. This all-green strategy presents a novel approach to developing sustainable energy storage devices.

Molecular and microbial insights towards anaerobic biodegradation of anionic polyacrylamide in oil sands tailings.

Anionic polyacrylamide (A-PAM) is widely used as a flocculant in the management of oil sands tailings. Nevertheless, apprehensions arise regarding its potential biodegradation and environmental consequences within the context of oil sands tailings. Consequently, it is imperative to delve into the anaerobic biodegradation of A-PAM in oil sands tailings to gain a comprehensive understanding of its influence on tailings water quality. This work explored the dynamics of A-PAM biodegradation across concentrations: 50, 100, 250, 500, 1000, and 2000 mg/kg TS. The results showed a significant decrease in A-PAM concentration and molecular weight at lower concentrations (50 and 100 mg/kg TS) compared to higher ones, suggesting enhanced degradation efficiency. Likewise, the organic transformation and methane production exhibited dependency on A-PAM concentrations. The peak concentrations observed were 20.0 mg/L for volatile fatty acids (VFAs), 0.07 mg/L for acrylamide (AMD), and 8.9 mL for methane yield, with these maxima being recorded at 50 mg/kg TS. The biodegradation efficiency diminishes at higher concentrations of A-PAM, potentially due to the inhibitory effects of polyacrylic acid accumulation. A-PAM biodegradation under anaerobic condition did not contribute to acute toxicity or genotoxicity. SEM-EDS, FT-IR and XRD analyses further revealed that higher concentrations of A-PAM inhibited the biodegradation by altering floc structure and composition, thereby restricting the microbial activity. Major microorganisms, including Smithella, Candidatus_Cloacimonas, W5, XBB1006, and DMER64 were identified, highlighting A-PAM's dual role as a source of carbon and nitrogen under anaerobic conditions. The above findings from this research not only significantly advance understanding of A-PAM's environmental behavior but also contribute to the effective management practices in oil sands tailings.

Effectiveness and safety of polyacrylamide hydrogel injection for knee osteoarthritis: results from a 12-month follow up of an open-label study.

OBJECTIVE: There are few effective osteoarthritis (OA) therapies. A novel injectable polyacrylamide hydrogel (iPAAG) previously demonstrated efficacy and safety up to week 26 in an open-label study of knee OA. Here we report longer-term effectiveness and safety data. METHODS: This multi-centre, open-label study included patients with symptomatic and radiographic knee OA. Primary outcome was WOMAC pain (0-100 scale) at 13 weeks, and patients continued to 26 weeks before entering a further 26-week extension phase. Secondary efficacy outcomes included WOMAC stiffness and function subscales, Patient Global Assessment (PGA) and proportion of OMERACT-OARSI responders. Safety outcomes were adverse events (AEs). RESULTS: 49 participants (31 women, mean age 70) received an ultrasound-guided, intra-articular injection of 6 ml iPAAG; 46 completed the extension phase to 52 weeks. There was a significant reduction in the WOMAC pain score from baseline to 52 weeks (- 17.7 points (95% CI - 23.1; - 12.4); p < 0.0001). Similar sustained improvements were observed for WOMAC stiffness (11.0 points; 95% CI - 17.0; - 4.9), physical function (18.0 points; 95% CI - 19.1; - 10.6), and PGA (16.3 points; 95% CI - 23.1; - 9.4). At 52 weeks 62.2% of patients were OMERACT-OARSI responders. From 26 to 52 weeks, 8 adverse effects (AE), including 1 serious AE (cerebrovascular accident) were reported in 5 subjects. None of the new adverse events were thought to be device related. CONCLUSION: This open-label study suggests persistent benefits and safety of iPAAG through 52 weeks after a single injection. TRIAL REGISTRATION: Clinicaltrials.gov NCT04179552.

An optimized method of culturing neurons based on polyacrylamide gel.

Substrate stiffness is a microenvironment with a certain stiffness constructed by the extracellular matrix and adjacent cells, which plays an important role in the growth and development of cells and tissue formation. Studies have indicated that the stiffness of the brain is about 0.1-1 kPa. The physiological and pathological processes of the nervous system are mediated by the substrate stiffness that the neurons suffer. However, how substrate stiffness regulates these processes remains to be studied. Culturing neurons on substrates with different stiffness in vitro is one of the best methods to study the role of stiffness in regulating neuronal development and activity. In this study, by changing the preparation time and the activation time of polyacrylamide gel, we provide an improved method that achieves a low toxic substrate environment for better primary neuron adhesion and development. Hope that this method is convenient for those studying the role of substrate stiffness in neurons.

Granulomatous mastitis and pectoralis major muscle defect following polyacrylamide hydrogel injection: a case report and literature review.

Background: Breast augmentation through the injection of polyacrylamide hydrogel (PAAG) was a popular procedure in the past, but it has since been prohibited due to various complications, including masses, migration, infection, inflammation, and even cancer. However, there were rare cases of granulomatous mastitis with pectoralis major muscle defect following PAAG injection for breast augmentation. Case Description: A 40-year-old female patient presented with a swollen and suppurative mass in her left breast and was insensitive to antibiotics. She was admitted to our department for further treatment after 7 months with progressive local and general symptoms. Ultrasound imaging showed ill-defined heterogeneous echoes, and contrast-enhanced magnetic resonance imaging (MRI) revealed non-mass enhancement lesions in the multiregional distribution in Breast Imaging-Reporting and Data System 4A (BI-RADS 4A) with oedema in the retroglandular space and multiple enlarged lymph nodes in the ipsilateral axilla. Intraoperative observations revealed necrotic tissues, multiple abscesses, residual mucoid PAAG prosthesis diffused into the mammary glands and intramuscularly into the pectoralis muscle, and partial loss of pectoralis major muscle. Histopathological results revealed foreign-body granulomas accompanied by gel-like granular PAAG and proliferative inflammatory cells. She recovered after undergoing the characteristic surgical management in our center under general anesthesia and had no recurrence during the 2-year follow-up. Conclusions: This case revealed that PAAG injection for augmentation mammaplasty, even after the removal operation, could result in subsequent complications, including granulomatous mastitis and pectoralis major muscle damage. PAAG filler complications are difficult to treat, therefore, it is essential to establish appropriate and effective therapeutic procedures.

Injectable and rapidly expandable thrombin-decorated cryogels achieve rapid hemostasis and high survival rates in a swine model of lethal junctional hemorrhage.

Effective therapies are urgently needed to stabilize patients with marginally compressible junctional hemorrhage long enough to get them to the hospital alive. Herein, we report injectable and rapidly expandable cryogels consisting of polyacrylamide and thrombin (AT cryogels) created by cryo-polymerization for the efficient management of lethal junctional hemorrhage in swine. The produced cryogels have small pore sizes and highly interconnected porous architecture with robust mechanical strength. The cryogels exhibit rapid shape memory properties and prove to be resilient against fatigue. These cryogels also show high water/blood absorption capacity, fast blood clotting effect, and enhanced adhesion of red blood cells and platelets in vitro. Further, in vivo, hemostatic efficacy tests in a lethal swine junctional hemorrhage model suggest that treatment with AT cryogels, especially AT-2 cryogels, achieves the least blood loss and the highest survival rate (100 %) compared to currently employed products such as XStat® and combat gauze. The high hemostatic performance of the cryogels may be attributed to highly interconnected porous architecture with small pore size and the use of thrombin as a pro-coagulant agent. Collectively, injectable and rapidly expandable thrombin-decorated polyacrylamide-based cryogels show significant promise as hemostatic material, offering effective management of marginally compressible junctional hemorrhages in prehospital settings.