ABSTRACT
This work presents a novel nanoparticle-based thermosensor implant able to reveal the precise temperature variations along the polymer filaments, as it contracts and expands due to changes in the macroscale local temperature. The multimodal device is able to trace the position and the temperature of a polypropylene mesh, employed in abdominal hernia repair, by combining plasmon resonance and Raman spectroscopy with hydrogel responsive system. The novelty relies on the attachment of the biocompatible nanoparticles, based on gold stabilized by a chitosan-shell, already charged with the Raman reporter (RaR) molecules, to the robust prosthesis, without the need of chemical linkers. The SERS enhanced effect observed is potentiated by the presence of a quite thick layer of the copolymer (poly(N-isopropylacrylamide)-co-poly(acrylamide)) hydrogel. At temperatures above the LCST of PNIPAAm-co-PAAm, the water molecules are expulsed and the hydrogel layer contracts, leaving the RaR molecules more accessible to the Raman source. In vitro studies with fibroblast cells reveal that the functionalized surgical mesh is biocompatible and no toxic substances are leached in the medium. The mesh sensor opens new frontiers to semi-invasive diagnosis and infection prevention in hernia repair by using SERS spectroscopy. It also offers new possibilities to the functionalization of other healthcare products.
Subject(s)
Body Temperature , Polymers , Temperature , Prostheses and Implants , Hydrogels/chemistryABSTRACT
Tissue engineering replaces injured tissues by manipulating cells, making scaffolds, and using molecules that stimulate the tissue. Mesenchymal stem cells (MSCs) are good candidates for tissue engineering, as this is one of the cell types which are recruited to repair injured tissues. Scaffolds are structural devices that allow cell fixation and migration, with polypropylene meshes being an example. This study aims to evaluate the culture of adipose tissue-derived mesenchymal stem cells (ADSCs), isolated from C57Bl/6 GFP + mice, in two types of polypropylene meshes (macroporous and microporous) in conventional culture plates and plates coated with methacrylate, over a period of fifteen days. The objective was to obtain the best interaction protocol between the mesh and the cells. The choice of the best method was based on adherence, maintenance of adherence and viability during culture. The amount of ADSCs adhering was checked daily by counting in a Neubauer Chamber and by using a growth curve performed with the MTT assay. The ADSCs adhering to the meshes were visualized with DAPI, panotic, hematoxylin and eosin, immunohistochemistry (integrin), and immunofluorescence (actin). ADSCs adhere to all forms of culture and to the two types of polypropylene mesh. ADSCs adhered more to the microporous mesh, within the seven day period of culture and in the plates without methacrylate. Thus, polypropylene meshes offer a good scaffold for ADSCs to adhere to.
A engenharia de tecidos substitui tecidos danificados com a manipulação de células, confecção de arcabouços e a utilização de moléculas que estimulem o tecido. As células-tronco mesenquimais (MSCs) são boas candidatas para engenharia de tecido, pois são um dos tipos celulares recrutadas para a reparação de tecidos lesionados. O arcabouço deve ser um dispositivo estrutural que forneça uma estrutura para o crescimento e a diferenciação celular no sítio, sendo a tela de polipropileno um exemplo. O objetivo deste estudo foi avaliar o cultivo de células-tronco mesenquimais de tecido de adiposo (ADSCs), isoladas de camundongos C57Bl/6 GFP+, em dois tipos de telas de polipropileno (macroporosa e microporosa) em placas de cultura convencionais e revestidas com metacrilato, durante quinze dias, para obter o melhor protocolo de interação entre a tela e as células. A escolha do melhor método foi baseada na adesão, manutenção da adesão e viabilidade durante cultivo. A quantidade de ADSCs aderidas foi verificada diariamente em contagem em Câmara de Neubauer e através de uma curva de crescimento realizada através de ensaio de MTT. As ADSCs aderidas nas telas foram visualizadas com a marcação de DAPI, panótico, hematoxilina e eosina, imumo-histoquímica (integrina) e imunofluorescência (actina). Nas duas formas de cultivo e nos dois tipos de telas de polipropileno houve aderência das ADSCs. Houve maior aderência na tela microporosa, no período de sete dias de cultivo e em placas sem metacrilato. Conclui-se que a tela de polipropileno oferece um bom arcabouço para as ADSCs se aderirem.
Subject(s)
Animals , Mice , Polypropylenes/analysis , Tissue Embedding/methods , Tissue Engineering/methods , Tissue Scaffolds , Mesenchymal Stem Cells , MiceABSTRACT
A engenharia de tecidos tem como objetivo substituir tecidos danificados, manipulando células, confecção de arcabouços e a utilização de moléculas que estimulem o tecido. A proposta deste estudo foi avaliar duas técnicas de cultivo de células-tronco mesenquimais (MSC) em diferentes placas de cultura, utilizando dois tipos de telas de polipropileno (macroporoso e microporoso), para obter as melhores condições de interação entre a tela e as células, e definir uma proposta de protético para engenharia de tecidos. As telas de polipropileno foram cultivadas com células-tronco mesenquimais de tecido adiposo (ADSCs) isoladas de camundongos C57B1/6 GFP+ durante quinze dias em placas revestidas com metacrilato ou não revestidas com metacrilato. A quantidade de ADSCs aderidas foram verificadas diariamente em Câmara de Neubauer e através de uma curva de crescimento realizada pelo ensaio MTT. As ADSCs aderidas às malhas foram visualizadas com marcação de DAPI, panóticas, hematoxilina e eosina imuno-histoquímica e imunofluorescência. O melhor protocolo foi na tela microporosa, no o período de sete dias de cultivo e em placas sem metacrilato. Conclui-se que a tela de polipropileno fornece um bom suporte para as ADSCs se aderirem podendo ser utilizada na engenharia de tecidos.
Tissue engineering replaces injured tissues by manipulating cells, making scaffolds, and using molecules that stimulate the tissue. Mesenchymal stem cells (MSCs) are good candidates for tissue engineering, as this is one of the cell types which are recruited to repair injured tissues. Scaffolds are structural devices that allow cell fixation and migration, with polypropylene meshes being an example. This study aims to evaluate the culture of adipose tissue-derived mesenchymal stem cells (ADSCs), isolated from C57Bl/6 GFP + mice, in two types of polypropylene meshes (macroporous and microporous) in conventional culture plates and plates coated with methacrylate, over a period of fifteen days. The objective was to obtain the best interaction protocol between the mesh and the cells. The choice of the best method was based on adherence, maintenance of adherence and viability during culture. The amount of ADSCs adhering was checked daily by counting in a Neubauer Chamber and by using a growth curve performed with the MTT assay. The ADSCs adhering to the meshes were visualized with DAPI, panotic, hematoxylin and eosin, immunohistochemistry (integrin), and immunofluorescence (actin). ADSCs adhere to all forms of culture and to the two types of polypropylene mesh. ADSCs adhered more to the microporous mesh, within the seven day period of culture and in the plates without methacrylate. Thus, polypropylene meshes offer a good scaffold for ADSCs to adhere to.
Subject(s)
Animals , Mice , Mice/physiology , Mesenchymal Stem Cells/chemistry , Polypropylenes/analysis , Polypropylenes/chemistryABSTRACT
The use of an adhesive for mesh fixation in hernia repair reduces chronic pain and minimizes tissue damage in the patient. This study was designed to assess the adhesive properties of a medium-chain (n-butyl) cyanoacrylate glue applied as drops or as a spray in a biomechanical and histologic study. Both forms of glue application were compared to the use of simple-loose or continuous-running polypropylene sutures for mesh fixation. Eighteen adult New Zealand White rabbits were used. For mechanical tests in an ex vivo and in vivo study, patches of polypropylene mesh were fixed to an excised fragment of healthy abdominal tissue or used to repair a partial abdominal wall defect in the rabbit respectively. Depending on the fixation method used, four groups of 12 implants each or 10 implants each respectively for the ex vivo and in vivo studies were established: Glue-Drops, Glue-Spray, Suture-Simple and Suture-Continuous. Biomechanical resistance in the ex vivo implants was tested five minutes after mesh fixation. In vivo implants for biomechanical and histologic assessment were collected at 14 days postimplant. In the ex vivo study, the continuous suture implants showed the highest failure sample tension, while the implants fixed with glue showed lower failure sample tension values. However, the simple and continuous suture implants returned the highest stretch values. In the in vivo implants, failure sample tension values were similar among groups while the implants fixed with a continuous running suture had the higher stretch values, and the glue-fixed implants the lower stretch values. All meshes showed good tissue integration within the host tissue regardless of the fixation method used. Our histologic study revealed the generation of a denser, more mature repair tissue when the cyanoacrylate glue was applied as a spray rather than as drops.
