Impact of polystyrene nanoplastics on primary sludge fermentation under acidic and alkaline conditions: Significance of antibiotic resistance genes.

As a part of industrial or commercial discharge, the influx of nanoplastics (NPs) to the wastewater treatment plants is inevitable. Consequently, it has become a must to understand the effects of these NPs on different unit processes. This study aimed to investigate the impact of three different concentrations of polystyrene nano plastics (PsNPs) on the fermentation of primary sludge (PrS), implemented in batch anaerobic bioreactors, at pH 5 and 10, considering the pH-dependent nature of the fermentation process. The results showed that PsNPs stimulated hydrogen gas production at a lower dose (50 µg/L), while a significant gas suppression was denoted at higher concentrations (150 µg/L, 250 µg/L). In both acidic and alkaline conditions, propionic and acetic acid predominated, respectively, followed by n-butyric acid. Under both acidic and alkaline conditions, exposure to PsNPs boosted the propagation of various antibiotic resistance genes (ARGs), including tetracycline, macrolide, ß-lactam and sulfonamide resistance genes, and integrons. Notably, under alkaline condition, the abundance of sul2 gene in the 250 µg PsNPs/L batch exhibited a 2.4-fold decrease compared to the control batch. The response of the microbial community to PsNPs exposure exhibited variations at different pH values. Bacteroidetes prevailed at both pH conditions, with their relative abundance increasing after PsNPs exposure, indicating a positive impact of PsNPs on PrS solubilization. Adverse impacts, however, were detected in Firmicutes, Chloroflexi and Actinobacteria. The observed variations in the survival rates of various microbes stipulate that they do not have the same tolerance levels under different pH conditions.

Effects of triclosan adsorption on intestinal toxicity and resistance gene expression in Xenopus tropicalis with different particle sizes of polystyrene.

Microplastics (MPs) are commonly found with hydrophobic contaminants in the water column and pose a serious threat to aquatic organisms. The effects of polystyrene microplastics of different particle sizes on the accumulation of triclosan in the gut of Xenopus tropicalis, its toxic effects, and the transmission of resistance genes were evaluated. The results showed that co-exposure to polystyrene (PS-MPs) adsorbed with triclosan (TCS) caused the accumulation of triclosan in the intestine with the following accumulation capacity: TCS + 5 µm PS group > TCS group > TCS + 20 µm PS group > TCS + 0.1 µm PS group. All experimental groups showed increased intestinal inflammation and antioxidant enzyme activity after 28 days of exposure to PS-MPs and TCS of different particle sizes. The TCS + 20 µm PS group exhibited the highest upregulated expression of pro-inflammatory factors (IL-10, IL-1ß). The TCS + 20 µm group showed the highest increase in enzyme activity compared to the control group. PS-MPs and TCS, either alone or together, altered the composition of the intestinal microbial community. In addition, the presence of more antibiotic resistance genes than triclosan resistance genes significantly increased the expression of tetracycline resistance and sulfonamide resistance genes, which may be associated with the development of intestinal inflammation and oxidative stress. This study refines the aquatic ecotoxicity assessment of TCS adsorbed by MPs and provides informative information for the management and control of microplastics and non-antibiotic bacterial inhibitors.

Use of Fludrocortisone for Hyperkalemia in Chronic Kidney Disease Not Yet on Dialysis.

Background: Hyperkalemia is a frequent and potentially lethal complication of chronic kidney disease (CKD). We retrospectively examined the potassium-lowering effect of oral fludrocortisone and its adverse effects in hyperkalemic CKD patients not yet on dialysis. Methods: Thirty-three patients (23 men and 10 women, ages 69±14 years) were included. To control hyperkalemia at the outpatient clinic, twenty-one patients (Group 1) received fludrocortisone (0.05-0.1 mg/day) without changes in angiotensin II receptor blockers (ARBs) and calcium polystyrene sulfonate (CPS), while twelve patients (Group 2) were treated with fludrocortisone in addition to stopping ARBs and/or adding low-dose CPS. Results: Fludrocortisone was administered for a median of 169 days (interquartile range, 47-445). At the first follow-up after fludrocortisone administration, serum potassium dropped from 6.14±0.32 mEq/L to 4.52±1.06 mEq/L (p<0.001) in Group 1 and from 6.37±0.35 mEq/L to 4.08±0.74 mEq/L (p<0.01) in Group 2. Ten patients in Group 1 and five patients in Group 2 measured serum potassium levels at four outpatient visits before and after fludrocortisone administration, respectively. The frequency of serum potassium ≥6.0 mEq/L decreased from 19/40 (48%) to 2/40 (5%) (p<0.001) in Group 1 and from 11/20 (55%) to 0/20 (0%) (p<0.001) in Group 2. Eleven patients experienced sodium retention-related problems after fludrocortisone administration: 7 with worsening leg edema, 2 with pleural effusions, and 2 with pulmonary edema. Conclusion: In pre-dialysis CKD patients, fludrocortisone at low doses effectively reduced serum potassium levels; however, sodium retention was a common adverse effect.

Convenient determination of polystyrene microplastics in soils by gel permeation chromatography-ultraviolet detection analysis.

Microplastics (MPs), especially polystyrene microplastics (PS-MPs), have emerged a new worldwide pollutant, prompting significant public concern regarding their detection in environmental media. Analysis of PS-MPs in soil remains as a challenging task for analysts due to the highly intricate matrices. This work presents a practical approach for detecting PS-MPs in soil, which involves dilute HCl-assisted extraction and gel permeation chromatography- ultraviolet detection (GPC-UV) analysis. The presence of MPs in soil was confirmed through the use of a scanning electron microscope in conjunction with energy dispersive spectroscopy investigation. PS-MPs was isolated from soil, by agitating it with a diluted HCl solution, filtering the resulting liquid, and dissolving the residue on the filter with THF. The extractant was subsequently determined by GPC-UV. The introduction of a small amount of HCl into the extraction system was found to greatly expedite the settling of soil in water and enhance the efficacy of extracting PS-MPs in about 30 min. The linear range of PS-MPs was from 1.0 to 100 µg/mL with R2 > 0.999. Good reproducibility was obtained with the intra-day relative standard deviation (RSD, n = 3) of 1.36 % and the inter-day RSD (n = 3) of 4.78 %. The concentration of PS-MPs in soil samples were N.D. - 2.33 µg/g, and the good recoveries were 76.7-100.3 %. The corresponding AFGEEprer score was calculated to be 0.59, indicating the concept of green analytical chemistry for the pretreatment method. These results indicated that this method has a powerful potential for the accurate and rapid determination of PS-MPs in soil.

Polystyrene sulfonate resin as an ophthalmic carrier for enhanced bioavailability of ligustrazine phosphate controlled release system.

Topical ocular sustained-release drug delivery systems represent an effective strategy for the treatment of ocular diseases, for which a suitable carrier has yet to be sufficiently developed. Herein, an eye-compatible sodium polystyrene sulfonate resin (SPSR) was synthesized with a uniform particle size of about 3 µm. Ligustrazine phosphate (LP) was adsorbed to SPSR by cation exchange to form LP@SPSR. LP@SPSR suspension eye drops were further developed using the combination of Carbopol 934P and xanthan gum as suspending agents. The LP@SPSR suspension showed a sustained release in vitro, which was consistent with the observed porcine corneal penetration ex vivo. Pharmacokinetics in tear fluid of rabits indicated that LP@SPSR suspension led to prolonged ocular retention of LP and a 2-fold improved the area under the drug concentration-time curve (AUC0-t). Pharmacokinetics in the aqueous humor of rabbits showed 2.8-fold enhancement in the AUC0-t compared to LP solution. The LP@SPSR suspension exhibited no cytotoxicity to human corneal epithelial cells, nor irritation was observed in rabbit eyes. Thus, the LP@SPSR suspension has been validated as a safe and sustained release system leading to enhanced ophthalmic bioavailability for treating ocular diseases.

Polystyrene nanoplastics at predicted environmental concentrations enhance the toxicity of copper on Caenorhabditis elegans.

Excessive nanoplastics not only pose a direct threat to the environment but also have the propensity to adsorb and interact with other pollutants, exacerbating their impact. The coexistence of nanoplastics and heavy metals in soils is a prevalent phenomenon. However, limited research existed about the joint effects of the two contaminants on soil organisms. In this paper, we ascertained the combined toxicity of polystyrene nanoplastics (PS-NPs) and copper (Cu2+) on soil organisms (Caenorhabditis elegans) at quantities that were present in the environment, further exploring whether the two toxicants were synergistic or antagonistic. The outcomes manifested that single exposure to low-dose PS-NPs (1 µg/L) would not cause significant damage to nematodes. After treatment with PS-NPs and Cu2+, the locomotion ability of nematode was impaired, accompanied by an elevation in reactive oxygen species (ROS) level and a biphasic response in antioxidant enzyme activity. Moreover, combined exposure to PS-NPs and Cu2+ induced the mRNA up-regulation of vit-6, cyp-35a2, hsp-16.2, age-1, and cep-1, both of which were stress-related genes. The comparative analysis between groups (with or without PS-NPs) revealed that the combined exposure group resulted in significantly greater toxic effects on nematodes compared with Cu2+ exposure alone. Furthermore, the addition of PS-NPs influenced the metabolic profiles of Caenorhabditis elegans under Cu2+ stress, with numerous differential metabolites associated with oxidative damage or defense mechanism. Overall, these findings manifested that PS-NPs at the expected environmental concentration elevated Cu2+ toxicity on nematodes.

Mechanistic insight into the photoconversion of losartan potassium mediated by different types of microplastics.

Nowadays the proliferation of microplastics (MPs) in aquatic environments and impacts on the fate of organic contaminants (OCs) has drawn sustained worldwide attention. In this study, we investigated the effects of different types and aging degrees of MPs, specifically polystyrene (PSMPs), polyethylene terephthalate (PETMPs), and polylactic acid (PLAMPs), on the photo-transformation of LSTPs. Our results revealed that the facilitation of LSTP photoconversion by PSMPs exhibited a positive linear relationship with aging degree. On the other hand, the effects of PETMPs with different oxidation levels on LSTP photoconversion were weak, while the contribution of PLAMPs decreased as aging increased. Characterizations, quenching and probing experiments showed the aging mechanisms and the generation of reactive oxygen species (ROS) converged among various MPs. Specifically, theoretical calculations, TOC and GC-MS were conducted to verify that in the PLA0-mediated systems, it was the intermediates of PLA0 that prevailed in promoting the photoconversion of LSTP. The aged PLA own have a large propensity to consume ROS, which diminished their promotion of LSTP degradation. This differd from the reactions involving PSMPs and PETMPs, where the microplastic particles themselves were the main drivers of the photoconversion process rather than intermediates.

Charged polystyrene microplastics inhibit uptake and transformation of 14C-triclosan in hydroponics-cabbage system.

INTRODUCTION: Since the outbreak of COVID-19, microplastics (MPs) and triclosan in pharmaceuticals and personal care products (PPCPs) are markedly rising. MPs and triclosan are co-present in the environment, but their interactions and subsequent implications on the fate of triclosan in plants are not well understood. OBJECTIVE: This study aimed to investigate effects of charged polystyrene microplastics (PS-MPs) on the fate of triclosan in cabbage plants under a hydroponic system. METHODS: 14C-labeling method and liquid chromatography coupled with quadrupole/time-of-flight mass spectrometry (LC-QTOF-MS) analysis were applied to clarify the bioaccumulation, distribution, and metabolism of triclosan in hydroponics-cabbage system. The distribution of differentially charged PS-MPs in cabbage was investigated by confocal laser scanning microscopy and scanning electron microscopy. RESULTS: The results showed that MPs had a significant impact on bioaccumulation and metabolism of triclosan in hydroponics-cabbage system. PS-COO-, PS, and PS-NH3+ MPs decreased the bioaccumulation of triclosan in cabbage by 69.1 %, 81.5 %, and 87.7 %, respectively, in comparison with the non-MP treatment (control). PS-MPs also reduced the translocation of triclosan from the roots to the shoots in cabbage, with a reduction rate of 15.6 %, 28.3 %, and 65.8 % for PS-COO-, PS, and PS-NH3+, respectively. In addition, PS-NH3+ profoundly inhibited the triclosan metabolism pathways such as sulfonation, nitration, and nitrosation in the hydroponics-cabbage system. The above findings might be linked to strong adsorption between PS-NH3+ and triclosan, and PS-NH3+ may also potentially inhibit the growth of cabbage. Specially, the amount of triclosan adsorbed on PS-NH3+ was significantly greater than that on PS and PS-COO-. The cabbage biomass was reduced by 76.9 % in PS-NH3+ groups, in comparison with the control. CONCLUSION: The uptake and transformation of triclosan in hydroponics-cabbage system were significantly inhibited by charged PS-MPs, especially PS-NH3+. This provides new insights into the fate of triclosan and other PPCPs coexisted with microplastics for potential risk assessments.

Polystyrene nanoplastics of different particle sizes regulate the polarization of pro-inflammatory macrophages.

Microplastics (MPs) are defined as plastic particles smaller than 5 mm in size, and nanoplastics (NPs) are those MPs with a particle size of less than 1000 nm or 100 nm. The prevalence of MPs in the environment and human tissues has raised concerns about their potential negative effects on human health. Macrophages are the major defence against foreign substances in the intestine, and can be polarized into two types: the M1 phenotype and the M2 phenotype. However, the effect of NPs on the polarization of macrophages remains unclear. Herein, we selected polystyrene, one of the most plastics in the environment and controlled the particle sizes at 50 nm and 500 nm respectively to study the effects on the polarization of macrophages. We used mouse RAW264.7 cell line models in this macrophage-associated study. Experiments on cell absorption showed that macrophages could quickly ingest polystyrene nanoplastics of both diameters with time-dependent uptake. Compared to the untreated group and 10 µg/mL treatment group, macrophages exposed to 50 µg/mL groups (50 nm and 500 nm) had considerably higher levels of CD86, iNOS, and TNF-α, but decreased levels of aCD206, IL-10, and Arg-1. According to these findings, macrophage M1 and M2 polarization can both be induced and inhibited by 50 µg/mL 50 nm and 500 nm polystyrene nanoplastics. This work provided the first evidence of a possible MPs mode of action with appropriate concentration and size through the production of polarized M1, providing dietary and environmental recommendations for people, particularly those with autoimmune and autoinflammatory illnesses.

Effect of gamma irradiation on properties of the synthesized PANI-Cu nanoparticles assimilated into PS polymer for electromagnetic interference shielding application.

Conductive polymer nanocomposites for electromagnetic interference (EMI) shielding are important materials that can be combat the increasingly dangerous radiation pollution arising from electronic equipment and our surrounding environment. In this work, we have synthesized polyaniline-copper nanoparticles (PANI-Cu NPs) by the copper salt based oxidative polymerization method at room temperature and then added with different concentration (0, 1, 3 and 5 wt%) in polystyrene polymer forming PS/ PANI-Cu nanocomposites films by means of the traditional solution casting technique. The formed PANI-Cu NPs were investigated by UV/Vis spectroscopy, X-ray diffraction (XRD), transmission electron microscopy (TEM) and SEM/EDX elemental mapping techniques. On the other hand, the prepared PS/PANI-Cu nanocomposites films were evaluated by UV and SEM, the mechanical properties of the nanocomposites films were evaluated and showed an improvement by added PANI-Cu NPs up to 3 wt% and 50 kGy gamma exposure dose. The PS/PANI-Cu nanocomposites films were examined as electromagnetic interference shielding material. Electromagnetic shielding effectiveness of the produced nanocomposites were tested in the X-band of the radio frequency range namely from 8 to 12 GHz using the vector network analyzer (VNA) and a proper wave guide. All samples were studied before and after 50 kGy gamma-ray irradiation under the same condition of pressure and temperature. The results showed that the nanocomposites have improved shielding properties.

Are mixtures of micro/nanoplastics more toxic than individual micro or nanoplastic contamination in the clam Ruditapes decussatus?

The abundance of micro (MPs) and nano (NPs) sized plastic particles in the ocean is concerning due to their harmful effects on marine life. The interactions between MPs and NPs in the marine environment and their impact on marine biota remain not fully understood. This study contributes with new insights into the interaction between polystyrene NPs (PSNPs) and polyethylene MPs (PEMPs) on the clam Ruditapes decussatus. Results showed ingestion of MPs and NPs by clams, with PSNPs demonstrating higher toxicity in hemolymph. While no genotoxicity was observed, clams treated with MPs and the mixture showed increased acetylcolinesterase (AchE) activity over time. Additionally, the antioxidant defense system mitigated oxidative stress, suggesting effective neutralization of reactive oxygen species. Hazard assessment indicated the greatest impact on clam digestive glands after ten days of exposure, with an antagonistic interaction between MPs and NPs noted.

The impact of polystyrene nanoplastics on plants in the scenario of increasing temperatures: The case of Azolla filiculoides Lam.

There are great concerns for the accumulation in the environment of small dimension plastics, such as micro- and nanoplastics. Due to their small size, which facilitates their uptake by organisms, nanoplastics are of particular concern. The toxic effects of nanoplastics on plants are already reported in the literature, however nothing is known, to date, about the possible effects of climate change, in particular of increasing temperatures, on their toxicity for plants. To address this issue, plants of the water fern Azolla filiculoides were grown at optimal (25 °C) or high (35 °C) temperature, with or without polystyrene nanoplastics, and the effects of these stressors were assessed using a multidisciplinary approach. Green fluorescent polystyrene nanoplastics were used to track their possible uptake by A. filiculoides. The development and physiology of our model plant was adversely affected by both nanoplastics and high temperatures. Overall, histological, morphological, and photosynthetic parameters worsened under co-treatment, in accordance with the increased uptake of nanoplastics under higher temperature, as observed by fluorescence images. Based on our findings, the concern regarding the potential for increased toxicity of pollutants, specifically nanoplastics, at high temperatures is well-founded and warrants attention as a potential negative consequence of climate change. Additionally, there is cause for concern regarding the increase in nanoplastic uptake at high temperatures, particularly if this phenomenon extends to food and feed crops, which could lead to greater entry into the food chain.

Bio-based microplastic polylactic acid exerts the similar toxic effects to traditional petroleum-based microplastic polystyrene in mussels.

Microplastics (MPs) have accumulated in the oceans, causing adverse effects on marine organisms and the environment. Biodegradable polylactic acid (PLA) is considered as an excellent substitute for traditional petroleum-based plastics, but it is difficult to degrade completely and easily become MPs in the marine environment. To test the ecological risk of bio-based PLA, we exposed thick-shelled mussels (Mytilus coruscus) to bio-based PLA and petroleum-based polystyrene (PS) (at 102, 104, and 106 particles/L) for 14 days. The significant increase in enzyme activities related to oxidative stress and immune response showed that mussels were under physiological stress after MP ingestion. While enzyme activities of nerve conduction and energy metabolism were significantly disturbed after exposure. Meanwhile, normal physiological activities in respiration, ingestion and assimilation were also suppressed in association with enzyme changes. The negative effects of PS and PLA in mussels were not differentiated, and further integration analysis of integrated biomarker response (IBR) and principal component analysis (PCA) also showed that PLA would induce adverse effects in mussels and ecological risks as PS, especially at environmental concentrations. Therefore, it is necessary to pay more attention to the environmental and ecological risk of bio-based MP PLA accumulating in the marine environment.

Synergy between nanoplastics and benzo[a]pyrene promotes senescence by aggravating ferroptosis and impairing mitochondria integrity in Caenorhabditis elegans.

Micro-nano plastics have been reported as important carriers of polycyclic aromatic hydrocarbons (PAHs) for long-distance migration in the environment. However, the combined toxicity from long-term chronic exposure beyond the vehicle-release mechanism remains elusive. In this study, we investigated the synergistic action of Benzo[a]pyrene (BaP) and Polystyrene nanoparticles (PS) in Caenorhabditis elegans (C. elegans) as a combined exposure model with environmental concentrations. We found that the combined exposure to BaP and PS, as opposed to single exposures at low concentrations, significantly shortened the lifespan of C. elegans, leading to the occurrence of multiple senescence phenotypes. Multi-omics data indicated that the combined exposure to BaP and PS is associated with the disruption of glutathione homeostasis. Consequently, the accumulated reactive oxygen species (ROS) cannot be effectively cleared, which is highly correlated with mitochondrial dysfunction. Moreover, the increase in ROS promoted lipid peroxidation in C. elegans and downregulated Ferritin-1 (Ftn-1), resulting in ferroptosis and ultimately accelerating the aging process of C. elegans. Collectively, our study provides a new perspective to explain the long-term compound toxicity caused by BaP and PS at real-world exposure concentrations.

Influence of algal-extracellular polymeric substances (EPS) on the pristine and combined toxicity of TiO2 NPs and PSNPs in Artemia salina: Eco-corona enhances the toxic effects.

The study on the influence of Natural Organic Matter (NOM) over the individual and combined effects of different nanomaterials on marine species is pertinent. The current study explores the role of Extracellular Polymeric Substances (EPS) in influencing the individual and combined toxic effects of polystyrene nanoplastics (PSNPs) viz. aminated (NH2-PSNPs), carboxylated (COOH-PSNPs), and plain PSNPs and TiO2 NPs in the marine crustacean, Artemia salina. A. salina was interacted with pristine PSNPs, pristine TiO2 NPs, EPS incubated PSNPs, EPS incubated TiO2 NPs, binary mixture of PSNPs and TiO2 NPs, and EPS adsorbed binary mixture of PSNPs and TiO2 NPs for 48 h. The present study proves that, when compared to the pristine toxicity of PSNPs and TiO2 NPs, the coexposure of TiO2 NPs with PSNPs resulted in increased toxicity. The adsorption of algal EPS on the NMs (both in their pristine and combined forms) significantly increased the toxic nature of the NMs against A. salina. It was observed that with an increase in the hydrodynamic diameter of the particles, the mortality, oxidative stress, and ingestion of the NMs by A. salina increased. The uptake of Ti by A. salina from 8 mg/L TiO2 NPs, EPS adsorbed 8 mg/L TiO2 NPs, 8 mg/L TiO2 NPs + NH2-PSNPs and the EPS adsorbed mixture of 8 mg/L TiO2 NPs, 8 mg/L TiO2 NPs + NH2-PSNPs was observed to be 0.043, 0.047, 0.186, and 0.307 mg/g of A. salina. The adsorption of algal EPS on the NMs (both in their pristine and combined forms) significantly increased the toxic nature of the NMs against A. salina. The major outcomes from the current study highlight the role of EPS in exacerbating the toxicity of NMs in marine crustaceans.

Polystyrene Microplastics Causes Diarrhea and Impairs Intestinal Angiogenesis through the ROS/METTL3 Pathway.

Due to the immature intestinal digestion, immunity, and barrier functions, weaned infants are more susceptible to pathogens and develop diarrhea. Microplastics (MPs), pervasive contaminants in food, water, and air, have unknown effects on the intestinal development of weaned infants. This study explored the impact of polystyrene MPs on intestinal development using a weaned piglet model. Piglets in the control group received a basal diet, and those in the experimental groups received a basal diet contaminated with 150 mg/kg polystyrene MPs. The results showed that exposure to polystyrene MPs increased the diarrhea incidence and impaired the intestinal barrier function of weaned piglets. Notably, the exposure led to oxidative stress and inflammation in the intestine. Furthermore, polystyrene MPs-treated weaned piglets showed a reduced level of intestinal angiogenesis. Mechanistically, polystyrene MPs suppressed methyltransferase-like 3 (METTL3) expression by increasing reactive oxygen species (ROS) production, consequently destabilizing angiogenic factors' mRNA and hindering intestinal angiogenesis. In summary, polystyrene MPs contamination in the diet increases diarrhea and compromises intestinal angiogenesis through the ROS/METTL3 pathway, demonstrating their toxic effects on the intestine health of weaned infants.

Integrated transcriptomic and metabolomic analysis reveals the underlying mechanisms for male reproductive toxicity of polystyrene nanoplastics in mouse spermatocyte-derived GC-2spd(ts) cells.

BACKGROUND: Polystyrene nanoplastics (PS-NPs), are ubiquitous pollution sources in human environments, posing significant biosafety and health risks. While recent studies, including our own, have illustrated that PS-NPs can breach the blood-testis barrier and impact germ cells, there remains a gap in understanding their effects on specific spermatogenic cells such as spermatocytes. METHODS AND RESULTS: Herein, we employed an integrated approach encompassing phenotype, metabolomics, and transcriptomics analyses to assess the molecular impact of PS-NPs on mouse spermatocyte-derived GC-2spd(ts) cells. Optimal exposure conditions were determined as 24 h with 50 nm PS-NPs at 12.5 µg/mL and 90 nm PS-NPs at 50 µg/mL for subsequent multi-omics analysis. Our findings revealed that PS-NPs significantly influenced proliferation and viability, causing alterations in transcriptome and metabolome profiles. Transcriptomics analysis of GC-2spd(ts) cells exposed to PS-NPs indicated the pivotal involvement of cell proliferation and cycle, autophagy, ferroptosis, and redox reaction pathways in PS-NP-induced effects on the proliferation and viability of GC-2spd(ts) cells. Furthermore, metabolomics analysis identified major changes in amino acid metabolism, cyanoamino acid metabolism, and purine and pyrimidine metabolism following PS-NP exposure. CONCLUSION: Our integrated approach, combining metabolomics and transcriptomics profiles with phenotype data, enhances our understanding of the adverse effects of PS-NPs on germ cells.

Combined effect and mechanism of microplastic with different particle sizes and levofloxacin on developing Rana nigromaculata: Insights from thyroid axis regulation and immune system.

Microplastics (MPs) usually appear in the aquatic environment as complex pollutants with other environmental pollutants, such as levofloxacin (LVFX). After 45-day exposure to LVFX and MPs with different particle sizes at environmental levels, we measured the weight, snout-to-vent length (SVL), and development stages of Rana nigromaculata. Furthermore, we analyzed proteins and genes related to immune system and thyroid axis regulation, intestinal histological, and bioaccumulation of LVFX and MPs in the intestine and brain to further explore the toxic mechanism of co-exposure. We found MPs exacerbated the effect of LVFX on growth and development, and the order of inhibitory effects is as follows: LVFX-MP3>LVFX-MP1>LVFX-MP2. 0.1 and 1 µm MP could penetrate the blood-brain barrier, interact with LVFX in the brain, and affect growth and development by regulating thyroid axis. Besides, LVFX with MPs caused severer interference on thyroid axis compared with LVFX alone. However, 10 µm MP was prone to accumulating in the intestine, causing severe histopathological changes, interfering with the intestinal immune system and influencing growth and development through immune enzyme activity. Thus, we concluded that MPs could regulate the thyroid axis by interfering with the intestinal immune system.

Effects of Testing Methods and Sample Configuration on the Flexural Properties of Extruded Polystyrene.

Extruded polystyrene (XPS) is frequently used in the construction of many different structures. Therefore, it is necessary to appropriately characterize its mechanical properties to ensure the safety of said structures. Among the available characterization tests, static bending tests are simple and easy to perform; owing to these characteristics, they should be performed more frequently than other tests. In static bending tests on XPS, there are several challenges owing to the high flexibility of XPS, and the chosen testing method and sample configuration affect the accuracy of characterization. For cellular plastics, including XPS, three-point bending (TPB) test methods are standardized by the International Organization for Standardization (ISO) and Japanese Industrial Standards (JIS) as in ISO 1209-2:2007 and JIS K 7221-2:2006, respectively, where the sample configurations are determined. Therefore, TPB tests of cellular plastics have been conventionally performed based on these standardized methods to characterize the bending properties. In contrast, investigations on the effects of testing methods and sample configurations have often been neglected due to the existence of these standardized methods. However, to characterize the bending properties of XPS accurately, the effects of the testing method and sample configuration must be examined in detail. In this study, three bending properties (Young's modulus, proportional limit stress, and bending strength) of samples cut from an XPS panel were determined using three-point bending (TPB), four-point bending (FPB), and compression bending (CB) tests with varying sample span/depth ratios from 5 to 50 at intervals of 5, and statistical analyses were performed to determine the relevance of the tests. The effect of sample configuration on Young's modulus could be reduced when the span/depth ratio range was 25-50, 25-50, and 15-50 in the TPB, FPB, and CB tests, respectively, whereas that on the proportional limit stress was reduced in the span/depth ratio range of 5-50, 20-50, and 15-50 in the TPB, FPB, and CB tests, respectively. Additionally, the effect on the bending strength was reduced when the span/depth ratio range was 5-50, 20-50, and 5-50 in the TPB, FPB, and CB tests, respectively. Therefore, these results suggest that the TPB and CB tests were more feasible than the FPB test when the span/depth ratio was determined as being 25-50 and 15-50, respectively. However, clear differences were observed in the sample bending properties determined in these tests. In light of these findings, further studies should be conducted to elucidate these differences.

Enhanced Cadmium Adsorption Dynamics in Water and Soil by Polystyrene Microplastics and Biochar.

Microplastics (MPs) are prevalent emerging pollutants in soil environments, acting as carriers for other contaminants and facilitating combined pollution along with toxic metals like cadmium (Cd). This interaction increases toxic effects and poses substantial threats to ecosystems and human health. The objective of this study was to investigate the hydrodynamic adsorption of Cd by conducting experiments where polystyrene microplastics (PS) and biochar (BC) coexisted across various particle sizes (10 µm, 20 µm, and 30 µm). Then, soil incubation experiments were set up under conditions of combined pollution, involving various concentrations (0.5 g·kg-1, 5 g·kg-1, 50 g·kg-1) and particle sizes of PS and BC to assess their synergistic effects on the soil environment. The results suggest that the pseudo-second-order kinetic model (R2 = 0.8642) provides a better description of the adsorption dynamics of Cd by PS and BC compared to the pseudo-first-order kinetic model (R2 = 0.7711), with an adsorption saturation time of 400 min. The Cd adsorption process in the presence of PS and BC is more accurately modeled using the Freundlich isotherm (R2 > 0.98), indicating the predominance of multilayer physical adsorption. The coexistence of 10 µm and 20 µm PS particles with BC enhanced Cd absorption, while 30 µm PS particles had an inhibitory effect. In soil incubation experiments, variations in PS particle size increased the exchangeable Cd speciation by 99.52% and decreased the residual speciation by 18.59%. The addition of microplastics notably impacted the exchangeable Cd speciation (p < 0.05), with smaller PS particles leading to more significant increases in the exchangeable content-showing respective increments of 45.90%, 106.96%, and 145.69%. This study contributes to a deeper understanding of the mitigation mechanisms of biochar in the face of combined pollution from microplastics and heavy metals, offering theoretical support and valuable insights for managing such contamination scenarios.