Improving assay feasibility and biocompatibility of 3D cyclic olefin copolymer microwells by superhydrophilic modification via ultrasonic spray deposition of polyvinyl alcohol.

Sample partitioning is a crucial step towards digitization of biological assays on polymer microfluidic platforms. However, effective liquid filling into microwells and long-term hydrophilicity remain a challenge in polymeric microfluidic devices, impeding the applicability in diagnostic and cell culture studies. To overcome this, a method to produce permanent superhydrophilic 3-dimensional microwells using cyclic olefin copolymer (COC) microfluidic chips is presented. The COC substrate is oxidized using UV treatment followed by ultrasonic spray coating of polyvinyl alcohol solution, offering uniform and long-term coating of high-aspect ratio microfeatures. The coated COC surfaces are UV-cured before bonding with a hydrophobic pressure-sensitive adhesive to drive selective filling into the wells. The surface hydrophilicity achieved using this method remains unchanged (water contact angle of 9°) for up to 6 months and the modified surface is characterized for physical (contact angle & surface energy, morphology, integrity of microfeatures and roughness), chemical composition (FTIR, Raman spectroscopy) and coating stability (pH, temperature, time). To establish the feasibility of the modified surface in biological applications, PVA-coated COC microfluidic chips are tested for DNA sensing (digital LAMP detection of CMV), and biocompatibility through protein adsorption and cell culture studies (cell adhesion, viability, and metabolic activity). Kidney and breast cells remained viable for the duration of testing (7 days) on this modified surface, and the coating did not affect the protein content, morphology or quality of the cultured cells. The ultrasonic spray coated system, coating with 0.25 % PVA for 15 cycles with 0.12 A current after UV oxidation, increased the surface energy of the COC (naturally hydrophobic) from 22.04 to 112.89 mJ/m2 and improved the filling efficiency from 40 % (native untreated COC) to 94 % in the microwells without interfering with the biocompatibility of the surface, proving to be an efficient, high-throughput and scalable method of microfluidic surface treatment for diagnostic and cell growth applications.

Preparation of poly(vinyl alcohol) nanofibers containing disulfiram-copper complex by electrospinning: a potential delivery system against melanoma.

BACKGROUND: Melanoma poses a significant threat to human health, making the development of a safe and effective treatment a crucial challenge. Disulfiram (DS) is a proven anticancer drug that has shown effectiveness when used in combination with copper (DS-Cu complex). OBJECTIVES: This study focuses on encapsulation of DS-copper complex into nanofiber scaffold from polyvinyl alcohol (PVA) (DS-Cu@PVA). In order to increase bioavailability towards melanoma cell lines and decrease its toxicity. METHODS: The scaffold was fabricated through an electrospinning process using an aqueous solution, and subsequently analyzed using ART-Fourier transform infrared spectroscopy (ART-FTIR), scanning electron microscopy (SEM), and energy dispersive X-ray analysis (EDX). Additionally, cellular cytotoxicity, flow cytometry analysis, and determination of caspase 3 activity were conducted to further characterize the scaffold. RESULTS: The results confirmed that encapsulation of DS-Cu complex into PVA was successful via different characterization. The scanning electron microscopy (SEM) analysis revealed that the diameter of the nanofibers remained consistent despite the addition of DS-Cu. Additionally, ATR-FTIR confirmed that the incorporation of DS-Cu into PVA did not significantly alter the characteristic peaks of PVA. Furthermore, the cytotoxicity assessment of the DS-Cu@PVA nanofibrous scaffold using human normal skin cells (HFB4) demonstrated its superior biocompatibility compared to DS-Cu-free counterparts. Notably, the presence of DS-Cu maintained its effectiveness in promoting apoptosis by increasing cellular reactive oxygen species, proapoptotic gene expression, and caspase 3 activity, while simultaneously reducing glutathione levels and oncogene expression in human and mouse melanoma cell lines (A375 and B16F10, respectively). Overall, these findings suggest that the addition of DS-Cu to PVA nanofibers enhances their biocompatibility and cytotoxic effects on melanoma cells, making them a promising candidate for biomedical applications. CONCLUSION: The findings indicate that the targeted delivery of DS-Cu onto a PVA nanofiber scaffold holds potential approach to enhance the efficacy of DS-Cu in combating melanoma.

Optimizing the feasibility of polyvinyl alcohol-potassium iodine gel for medical dosimeter.

This work aims to improve the post stabilty of reusable potassium iodide hydrogel dosimter. A reusable and low-cost radiochromic dosimeter containing a gel matrix of polyvinyl alcohol, potassium iodide dye, froctose as reducing agent and glutaraldehyde as cross-linking agent was developed for dose calibration in radiotherapy. The gel samples were exposed to different absorbed doses using a medical linear acceleration. UV-vis Spectrophotometry was utilized to investigate the changes in optical-properties of irradiated gels with regard to peak wavelength of 353 nm. The stability of the gel (one of the most limitation of using this dosimeter) was improved significantly by the addition of certain concentrations of dimethyl sulfoxide. The two-dimensional optical imaging system of charge-coupled-device (CCD) camera with a uniform RGB light-emitting-diode (LED) array source was used for diffusion coefficient purpose using two dimensional gel template. The value of diffusion coefficient reported is significant and highly reduced compared with other dosimeters reported in the literatures. Moreover, heating the improved gels to certain temperatures results in resetting their optical properties, which makes it possible to reuse for multiple times.

Tough Supramolecular Hydrogels Crafted via Lignin-Induced Self-Assembly.

Supramolecular hydrogels are typically assembled through weak non-covalent interactions, posing a significant challenge in achieving ultra strength. Developing a higher strength based on molecular/nanoscale engineering concepts is a potential improvement strategy. Herein, a super-tough supramolecular hydrogel is assembled by gradually diffusing lignosulfonate sodium (LS) into a polyvinyl alcohol (PVA) solution. Both simulations and analytical results indicate that the assembly and subsequent enhancement of the crosslinked network are primarily attributed to LS-induced formation and gradual densification of strong crystalline domains within the hydrogel. The optimized hydrogel exhibits impressive mechanical properties with tensile strength of ≈20 MPa, Young's modulus of ≈14 MPa, and toughness of ≈50 MJ m⁻3, making it the strongest lignin-PVA/polymer hydrogel known so far. Moreover, LS provides the supramolecular hydrogel with excellent low-temperature stability (<-60 °C), antibacterial, and UV-blocking capability (≈100%). Interestingly, the diffusion ability of LS is demonstrated for self-restructuring damaged supramolecular hydrogel, achieving 3D patterning on hydrogel surfaces, and enhancing the local strength of the freeze-thaw PVA hydrogel. The goal is to foster a versatile hydrogel platform by combining eco-friendly LS with biocompatible PVA, paving the way for innovation and interdisciplinarity in biomedicine, engineering materials, and forestry science.

Preliminary study on the preparation of antler powder/chitosan/ß-glycerophosphate sodium/polyvinyl alcohol porous hydrogel scaffolds and their osteogenic effects.

Introduction: The production of bone-like structural scaffolds through bone tissue engineering technology is a promising method for bone regeneration to repair bone defects. Deer antler, an easily harvested and abundantly sourced initial bone tissue structure, resembles the composition and structure of human cancellous bone and can serve as a new material for allogeneic bone transplantation. Methods: This study involved the preparation and characterization of antler powder/chitosan/ß-glycerophosphate sodium/polyvinyl alcohol (AP/CS/ß-GP/PVA) porous hydrogel scaffolds to verify their material properties and osteogenic mechanisms. The microstructure, hydrophilicity, and mechanical properties of the scaffolds were studied using Scanning Electron Microscopy (SEM), contact angle measurement, and a universal material testing machine. The interactions between the various components were investigated using Fourier-Transform Infrared Spectroscopy (FTIR). Biocompatibility, osteogenic properties, and expression of osteogenesis-related proteins of the scaffolds were evaluated through Cell Counting Kit-8 (CCK-8) assays, alkaline phosphatase staining, Alizarin Red staining, live/dead cell staining, and Western blot analysis. Results: The results showed that as the content of deer antler powder increased, both the hydrophilicity and mechanical properties of the scaffold materials improved, while the porosity slightly decreased with an increase in deer antler powder content. Cell culture experiments demonstrated that scaffolds with a higher proportion of deer antler powder were beneficial for the proliferation and differentiation of mouse pre-osteoblast (MC3T3-E1) cells, with the scaffolds containing 10% and 8% deer antler powder showing the best effects. The upregulation of RUNX2, OCN, OSX, and OPN protein expression may promote differentiation. Discussion: Therefore, the AP/CS/ß-GP/PVA hydrogel scaffolds have the potential to become a promising biomaterial for bone tissue engineering.

Development of Polyvinyl Alcohol (PVA) Nanofibers Containing Cationic Lipid/siRNA Complexes via Electrospinning: The Impact of PVA Characterization.

This study aimed to develop polyvinyl alcohol (PVA) nanofibers encapsulating 1,2-dioleoyl-3-trimethylammonium-propane (DOTAP)/siRNA complexes via electrospinning for the delivery of nucleic acid-based drugs. It also focused on the influence of the intrinsic properties of PVA on the efficacy of the system. PVA nanofibers, with diameters of 300-400 nm, were obtained, within which the siRNA remained intact and the DOTAP/siRNA complexes were uniformly dispersed. By incorporating DOTAP/siRNA complexes into the PVA nanofibers and assessing the impact of their RNA interference (RNAi) activity in A549-Luc cells, a stable inhibition of luciferase expression was observed. An examination of the nanofiber preparation process revealed that even when DOTAP or siRNA were added separately to the PVA solution without forming complexes, the RNAi effect was retained. The DOTAP/siRNA complexes released from the PVA nanofibers were internalized by the cells, with some PVA residues remaining on their surfaces. The significance of the degree of hydrolysis and polymerization of PVA on the performance of nanofibers was highlighted. Notably, PVA with a low degree of hydrolysis substantially enhanced RNAi effects, with luciferase expression inhibition reaching 91.5 ± 0.7%. Nanofibers made of PVA grades with anionic or cationic modifications were also evaluated, suggesting that they affect the efficacy of siRNA delivery. The insights obtained suggest avenues for future research to optimize drug delivery systems further.

High Strength UV-Resistant Composite Film of Fe3+-Coordination Lignin/PVA.

The literature on polyvinyl alcohol (PVA) films is extensive, however, these methods often necessitate intricate synthesis processes or the addition of plasticizers to modify the strength and water solubility of the PVA material. A high-strength UV radiation-resistant composite film by chelating Fe3+ with lignin and PVA, which exhibits excellent hydrolysis resistance is developed. This composite film is prepared simply by incorporating a small amount of dealkalized lignin (APPL) and ferric chloride (FeCl3) into PVA through a straightforward composite process. During the scanning test, it is noted that the film exhibits a high density of uniformly dispersed particles, endowing it with efficient ultraviolet absorption capabilities. The infrared and anti-dissolution tests reveal that the coordination of Fe3+ with lignin imparts an outstanding hydrolysis resistance to the film, obviating the need for any extender, curing agent, acid or base. The tensile fracture strength reaches an impressive 187.81Mpa in the tensile test. UV and indicator card tests unequivocally demonstrate that the film achieves a remarkable 100% anti-UV efficiency. This Fe3+ chelated lignin/PVA composite film, with its facile preparation, environmental sustainability, high strength, and outstanding anti-ultraviolet efficiency, can be deployed across diverse applications requiring robust protection against ultraviolet radiation.

Advances in Polyvinyl Alcohol-Based Membranes for Fuel Cells: A Comprehensive Review on Types, Synthesis, Modifications, and Performance Optimization.

Fuel cell technology is at the forefront of sustainable energy solutions, and polyvinyl alcohol (PVA) membranes play an important role in improving performance. This article thoroughly investigates the various varieties of PVA membranes, their production processes, and the numerous modification tactics used to solve inherent problems. Various methods were investigated, including chemical changes, composite blending, and the introduction of nanocomposites. The factors impacting PVA membranes, such as proton conductivity, thermal stability, and selectivity, were investigated to provide comprehensive knowledge. By combining various research threads, this review aims to completely investigate the current state of PVA membranes in fuel cell applications, providing significant insights for both academic researchers and industry practitioners interested in efficient and sustainable energy conversion technologies. The transition from traditional materials such as Nafion to PVA membranes has been prompted by limitations associated with the former, such as complex synthesis procedures, reduced ionic conductivity at elevated temperatures, and prohibitively high costs, which have hampered their widespread adoption. As a result, modern research efforts are increasingly focused on the creation of alternative membranes that can compete with conventional technical efficacy and economic viability in the context of fuel cell technologies.

Structural and Physiochemical Properties of Polyvinyl Alcohol-Succinoglycan Biodegradable Films.

Polyvinyl alcohol (PVA)-bacterial succinoglycan (SG) biodegradable films were developed through a solvent-casting method. Effects of the PVA/SG ratio on the thickness, transmittance, water holding capacity, and structural and mechanical properties were investigated by various analytical methods. All the prepared films were transparent and uniform, and XRD and FTIR analyses confirmed that PVA was successfully incorporated into SG. The films also showed excellent UV-blocking ability: up to close to 80% with increasing SG concentration. The formation of effective intermolecular interactions between these polymers was evidenced by their high tensile strength and moisture transport capacity. By measuring the biodegradation rate, it was confirmed that films with high SG content showed the fastest biodegradation rate over 5 days. These results confirm that PVA/SG films are eco-friendly, with both excellent biodegradability and effective UV-blocking ability, suggesting the possibility of industrial applications as a packaging material in various fields in the future.

The effect of MgO nanoparticle on PVA/PEG-based membranes for potential application in wound healing.

The interest in wound dressings increased ten years ago. Wound care practitioners can now use interactive/bioactive dressings and tissue-engineered skin substitutes. Several bandages can heal burns, but none can treat all chronic wounds. This study formulates a composite material from 70% polyvinyl alcohol (PVA) and 30% polyethylene glycol (PEG) with 0.2, 0.4, and 0.6 wt% magnesium oxide nanoparticles. This study aims to create a biodegradable wound dressing. A Fourier Transform Infrared (FTIR) study shows that PVA, PEG, and MgO create hydrogen bonding interactions. Hydrophilic characteristics are shown by the polymeric blend's 56.289° contact angle. MgO also lowers the contact angle, making the film more hydrophilic. Hydrophilicity improves film biocompatibility, live cell adhesion, wound healing, and wound dressing degradability. Differential Scanning Calorimeter (DSC) findings suggest the PVA/PEG combination melted at 53.16 °C. However, adding different weight fractions of MgO nanoparticles increased the nanocomposite's melting temperature (Tm). These nanoparticles improve the film's thermal stability, increasing Tm. In addition, MgO nanoparticles in the polymer blend increased tensile strength and elastic modulus. This is due to the blend's strong adherence to the reinforcing phase and MgO nanoparticles' ceramic material which has a great mechanical strength. The combination of 70% PVA + 30% PEG exhibited good antibacterial spatially at 0.2% MgO, according to antibacterial test results.

Enhanced biodegradation of 2, 4-dichlorophenol in packed bed biofilm reactor by impregnation of polyurethane foam with Fe3O4 nanoparticles: Bio-kinetics, process optimization, performance evaluation and toxicity assessment.

In this work, an effort has been made to enhance the efficacy of biological process for the effective degradation of 2, 4-dichlorophenol (2, 4-DCP) from wastewater. The polyurethane foam was modified with Fe3O4 nanoparticles and combined with polyvinyl alcohol, sodium alginate, and bacterial consortium for biodegradation of 2, 4-DCP in a packed bed biofilm reactor. The maximum removal efficiency of 2, 4-DCP chemical oxygen demand, and total organic carbon were found to be 92.51 ± 0.83 %, 86.85 ± 1.32, and 91.78 ± 1.24 %, respectively, in 4 days and 100 mg L-1 of 2, 4-DCP concentration at an influent loading rate of 2 mg L-1h-1 and hydraulic retention time of 50 h. Packed bed biofilm reactor was effective for up to four cycles to remove 2, 4-DCP. Growth inhibition kinetics were evaluated using the Edward model, yielding maximum growth rate of 0.45 day-1, inhibition constant of 110.6 mg L-1, and saturation constant of 62.3 mg L-1.

Fabrication of pH-stimuli hydrogel as bioactive materials for wound healing applications.

Hydrogels exhibit exceptional suitability as wound dressing due to their remarkable three-dimensional (3D) characteristics. Here, we have reported the fabrication of hydrogels from biopolymers carboxymethyl cellulose (CMC), polyvinyl alcohol (PVA), and gelatin via a simple blending method to mimic the natural extracellular matrix. Scanning electron microscopy (SEM), water contact meters (WCM), and Fourier-transform infrared spectroscopy (FTIR) were used to evaluate the chemical structural, morphological, and wettability behavior. The wetting and degradation behavior were also found to be different for different formulations (Min. (51.60o) and Max. (113.60o)) and (Min. (38.82 mg) and Max. (3.72 mg)), respectively. Swelling was investigated in different media, including phosphate buffer saline solution (PBS) and aqueous media. It was observed that the hydrogel displayed the highest degree of swelling in an aqueous medium (Min. (597.32-1121.49 %) and Max. (1089.51-2139.73 %)) compared to PBS media (Min. (567.01-1021.85 %) and Max. (899.13-1639.17 %)). The release of Neomycin was studied in a PBS medium via the Franz diffusion method at 37 °C. The maximal release in various media demonstrated pH-responsive behavior. The viability and proliferation of fibroblast (3T3) cell lines were examined in vitro to evaluate cytocompatibility. Human Embryonic Kidney (HEK) 293 cells were used to evaluate the hydrogels' ability to promote vascularization and angiogenesis. Therefore, the data demonstrate that hydrogels that have been manufactured have qualities that make them promising for use as wound dressings in wound healing applications.

Bronchial artery embolization using small particles is safe and effective: a single center 12-year experience.

BACKGROUND: Bronchial artery embolization (BAE) using particles is an established treatment for hemoptysis. The use of polyvinyl alcohol (PVA) with a particle size of 300 µm or larger is thought to reduce the risk of non-target embolization but may result in more proximal vessel occlusion than is ideal, resulting in a high rate of early recurrent hemorrhage. OBJECTIVE: This study evaluates the safety and efficacy of BAE using PVA particles with a size of less than 300 µm. METHODS: All patients who underwent BAE between 2010 and 2022 at a tertiary center were included. Demographic data, etiology and volume of hemoptysis, technical and clinical success, procedure-related complications, and follow-up information were collected from patients' electronic records. 150-250 µm PVA particles were used to commence embolization in all patients with the subsequent use of larger-sized particles in some individuals. The Kaplan-Meier method was used to estimate recurrence and survival rates. RESULTS: One hundred forty-four patients underwent 189 embolization procedures between 2010 and 2022 and were followed up for a median of 35 months [IQR 19-89]. 150 µm to 250 µm PVA particles were used as the sole embolic agent in 137 cases. Hemoptysis recurred within 30 days in 7%. The median time to repeat intervention was 144 days [IQR 42-441]. Seventeen out of 144 patients had a pulmonary artery branch pseudoaneurysm. The rate of major complications was 1% with no instances of stroke or spinal artery ischemia. Thirty-day mortality was 2% (4/189). CONCLUSION: BAE using 150-250 µm PVA particles is safe and effective with few complications and low rates of early hemoptysis recurrence. CLINICAL RELEVANCE STATEMENT: BAE using small particles is likely to improve outcomes, particularly the rate of early recurrence, in patients with hemoptysis, without an increase in procedural complications. KEY POINTS: BAE is a safe and effective treatment for patients with hemoptysis. Using small PVA particles in BAE has few complications and low rates of early recurrence. Pulmonary artery pseudoaneurysms should be actively sought in those with hemoptysis undergoing BAE.

Synthesis and Structural Characterization of Four Different Concentrations of Ant Nest (Myrmecodia pendens) Collagen Membranes with Potential for Medical Applications.

Purpose: The purpose of this study was to synthesize and structurally characterize four ant nest membranes in four different concentrations and determine the best concentration that could potentially be used as an alternative material for the production of new collagen barrier membranes. Materials and Methods: Membranes were created by mixing ant nest extracts at various concentrations of 0.5%, 1%, 1.5%, and 2%, as well as collagen, chitosan, and Polyvinyl Alcohol (PVA) using a film casting. A Universal Testing Machine (UTM) was used to evaluate mechanical properties including elastic modulus, tensile strength, maximum elongation, elongation at break, and maximum force. Water absorption was performed, FTIR was used for functional group identification, and morphology was examined using SEM. Additionally, EDS was used to identify the composition and distribution of elements in membranes. Statistical analysis was conducted using ANOVA (analysis of variance) and post hoc testing with a significance level of p <0.01 for quantitative data. Results: The results showed that the mechanical properties produced the following mean (standard deviation): elastic modulus 0.87 Mpa (0.11), tensile strength 16.32 N/mm2 (2.46), maximum elongation 4.96% (1.72), elongation at break 5.23% (1.87), and maximum force 22.50 N (5.06). The average water absorption capacity of all four membranes had a p-value <0.01. FTIR spectrum showed various peaks corresponding to functional groups, while SEM results indicated a homogeneous mixture. EDS analysis confirmed that the addition of ant plant extract at 0.5%, 1%, and 1.5% resulted in the presence of elements C, O, and Ca. Meanwhile, membranes prepared with 2% concentration had a different composition, namely C, O, Ca, and Na. Conclusion: Increasing the concentration of ant nest affects the values of the membrane's mechanical properties parameters, including the elastic modulus (0.87 Mpa), tensile strength (16.32 N/mm2), maximum elongation (4.96%), elongation at break (5.23%), and maximum force (22.50 N). The average membrane absorption of water (p value <0.01) was also affected. SEM images showed homogeneous mixing, and membrane EDS results consisted of C, O, and Ca composition. However, there was no effect on FTIR functional groups. The anthill membrane with a 1% concentration has the potential to serve as an alternative membrane in guided tissue regeneration.

Highly Biocompatible Antibacterial Hydrogel for Wearable Sensing of Macro and Microscale Human Body Motions.

Flexible electronics, like electronic skin (e-skin), rely on stretchable conductive materials that integrate diverse components to enhance mechanical, electrical, and interfacial properties. However, poor biocompatibility, bacterial infections, and limited compatibility of functional additives within polymer matrices hinder healthcare sensors' performance. This study addresses these challenges by developing an antibacterial hydrogel using polyvinyl alcohol (PVA), konjac glucomannan (KGM), borax (B), and flower-shaped silver nanoparticles (F-AgNPs), referred as PKB/F-AgNPs hydrogel. The developed hydrogel forms a hierarchical network structure, with a tensile strength of 96 kPa, 83% self-healing efficiency within 60 minutes, and 128% cell viability in Cell Counting Kit-8 (CCK-8) assays, indicating excellent biocompatibility. It also shows strong antibacterial efficacy against Gram-negative Escherichia coli (E. coli) and Gram-positive Staphylococcus aureus (S. aureus). Blue light irradiation enhances its antibacterial activity by 1.3-fold for E. coli and 2.2-fold for S. aureus. The hydrogel's antibacterial effectiveness is assessed by monitoring changes in electrical conductivity, providing a cost-effective alternative to traditional microbial culture assays. The PKB/F-AgNPs hydrogel's flexibility and electrical conductivity enable it to function as strain sensors for detecting body movements and facial expressions. This antibacterial hydrogel underscores its potential for future human-machine interfaces and wearable electronics.

Durability and Mechanical Properties of Nano-SiO2 and Polyvinyl Alcohol Fiber-Reinforced Cementitious Composites Subjected to Saline Freeze-Thaw Cycles.

To investigate the effects of nano-SiO2 (NS) and polyvinyl alcohol (PVA) fibers on the durability and mechanical properties of cementitious composites subjected to saline freeze-thaw cycling, a series of PVA fiber-reinforced cementitious composite (PFRCC) specimens were prepared using various fiber contents, and a series of NS and PVA fiber-reinforced cementitious composite (NPFRCC) specimens were prepared using various combinations of NS and fiber contents. Durability and fracture toughness tests were subsequently conducted on the specimens after different numbers of saline freeze-thaw cycles. The results indicate that the degradation of material properties can be divided into slow and accelerated damage stages before/after 50 freeze-thaw cycles. The durability and fracture toughness of the specimen series tended to increase, then decrease with increasing NS and PVA contents, suggesting optimum levels. When the PVA fiber content was 0.5%, PFRCC specimens had the best durability after saline freeze-thaw cycles; when the NS and PVA fiber contents were 1.0% and 0.5%, respectively, NPFRCC specimens had the best durability and fracture properties, and the initiation toughness, destabilization toughness, and fracture energy after 100 saline freeze-thaw cycles were 120.69%, 160.02%, and 451.31%, respectively. The results of this study may guide future exploration of the durability and mechanical properties of concrete subjected to freeze-thaw action.

Transcutaneous Delivery of Dexamethasone Sodium Phosphate Via Microneedle-Assisted Iontophoretic Enhancement - A Potential Therapeutic Option for Inflammatory Disorders.

AIM: This study aimed to fabricate dexamethasone sodium phosphate loaded microneedle arrays (MNA) and investigate their efficiency in combination with iontophoresis for the treatment of hind paw oedema in rats. METHODS: Drug loaded polyvinyl alcohol, polyvinyl pyrrolidone and D-sorbitol-based MNA11 were fabricated by vacuum micromolding. Physicochemical, morphological, thermal, in-silico, in-vitro insertion ability (on parafilm) and drug release studies were performed. Ex-vivo permeation, in-vivo insertion and anti-inflammatory studies were performed in combination with iontophoresis. RESULTS: MNA11 displayed sharp-tipped projections and acceptable physicochemical features. Differential scanning calorimetry results indicated that drug loaded MNA11 were amorphous solids. Drug interacted with PVP and PVA predominately via hydrogen bonding. Parafilm displayed conspicuously engraved complementary structure of MNA11. Within 60 min, 91.50 ± 3.1% drug released from MNA11. A significantly higher i.e., 95.06 ± 2.5% permeation of drug was observed rapidly (within 60 min) from MNA11-iontophoresis combination than MNA11 i.e., 84.07 ± 3.5% within 240 min. Rat skin treated using MNA11 and MNA11-iontophoresis showed disruptions / microchannels in the epidermis without any damage to underlying anatomical structures. MNA11-iontophoresis combination led to significant reduction (83.02 ± 3.9%) in paw oedema as compared to MNA11 alone (72.55 ± 4.1%). CONCLUSION: MNA11-iontophoresis combination can act as a promising candidate to deliver drugs transcutaneously for treating inflammatory diseases.

Preparation of starch/PVA nanoparticles and evaluation of their ability to stabilize Pickering emulsions.

Biodegradable and biocompatible polymer-based nanoparticles (NPs) hold great promise for various industries. We report the first development of composite NPs consisting of starch (St) and polyvinyl alcohol (PVA) using the nanoprecipitation technique with ethanol as an antisolvent. We varied the St:PVA ratios in the precursor solutions to evaluate their impact on the structure and properties of the composite NPs. The ratios used were 4:1, 1:1, and 1:4. Characterization by X-ray diffraction, differential scanning calorimetry, and thermogravimetric analysis revealed distinct XRD and TGA patterns for the composite St/PVANPs compared to their corresponding physical blends. This indicated the presence of mixed St/PVA crystallites within their structures. Additionally, the crystallinity of St/PVANPs increased with rising St content. Dynamic light scattering and scanning electron microscopy showed that nanoparticle sizes increased with higher PVA proportions. The St/PVANPs showed superior performance as stabilizers in Pickering emulsions, forming denser continuous networks in the gel-like structure of the emulsions. Additionally, increasing the PVA content in the composition of St/PVANPs strengthened the structure of Pickering emulsions. The emulsion stabilized by St20/PVA80NPs showed exceptional stability for one month. These findings highlight the potential of St/PVANPs as innovative materials for various applications, including emulsion stabilization.

PVA Hydrogels Supplemented with PLA Mesh for Tissue Regeneration Scaffold.

This study examined the tensile strength and biocompatibility properties of polyvinyl alcohol (PVA) hydrogel tissue regeneration scaffolds with polylactic acid (PLA) mesh fabric added as reinforcement, with a focus on the impact of heat treatment temperature and the number of layers of the PLA mesh fabric. The hydrogel scaffolds were prepared using a freeze-thaw method to create PVA hydrogel, with the PLA mesh fabric placed inside the hydrogel. The swelling ratio of the PVA/PLA hydrogel scaffolds decreased with increasing layer number and heat treatment temperature of the PLA mesh. The gel strength was highest when five layers of PLA mesh fabric were added, heat-treated at 120 °C, and confirmed to be properly placed inside the hydrogel by SEM images. The MTT assay and DAPI staining using HaCaT cells demonstrated that the cell proliferation was uninterrupted throughout the experimental period, confirming the biocompatibility of the scaffold. Therefore, we confirmed the possibility of using PLA mesh fabric as a reinforcement for PVA hydrogel to improve the strength of scaffolds for tissue regeneration, and we confirmed the potential of PLA mesh fabric as a reinforcement for various biomaterials.

Nelumbo nucifera flower extract incorporated alginate/polyvinyl alcohol films as a sustainable pH indicator for active food packaging applications.

In recent years, there has been a growing demand for environmentally friendly smart packaging materials. Therefore, in this study, we developed an eco-friendly pH-sensitive indicator film through the solvent casting process, incorporating alginate, polyvinyl alcohol, garlic, and Nelumbo nucifera flower extract. The effect of extract on the chemical and physical properties of the film were extensively studied using various characterization techniques. XRD and FTIR reveal the strong interaction between the polymers and the extract. The incorporation of the extract influenced various parameters such as swelling behavior, water solubility, and moisture content, while also improving the film's thermal stability, biodegradability, as well as its antioxidant and antimicrobial properties. Interestingly, the film exhibited a color change in response to pH change. During shrimp storage, the film showed a visible transition from purple to green, indicating shrimp spoilage. Additionally, the film's ability to detect freshness was confirmed by measuring total volatile basic nitrogen (TVBN). These findings suggest that the PVA/alginate/garlic/Nelumbo nucifera film shows promise as an intelligent packaging material for real-time food monitoring applications.