Clinical and radiographic success rate of the root canal filling materials used in primary teeth: A systematic review.

One of the most important factors that determine the success of pulpectomy in primary teeth is the root canal filling material used. This systematic review is an update on the success rates of various materials used for obturation in primary teeth. An electronic search was carried out in the PubMed, Scopus, Web of Science, and Cochrane Library databases with the preset inclusion and exclusion criteria. Only randomized or quasi-randomized clinical and controlled trials with a minimum follow-up of 12 months were included for analysis. Nine articles were considered potentially eligible for inclusion in this review. All the included trials had zinc oxide-eugenol (ZOE) cement as a control group. The time span of the included trials extended from 12 to 30 months. Only 2 trials were at low risk of bias. Evidence to support the success rates of obturating materials used in primary teeth is scarce, which necessitates further highquality randomized controlled clinical trials with regard to this issue.

Evaluation of stress distributions in endodontically treated anterior incisors under occlusal and trauma-induced forces following various restoration treatments: A finite element analysis.

BACKGROUND: The aim of this study was to calculate the stress distribution of fiberglass post associated with resin composite crown restoration and fiberglass posts with zirconia restorations in mature and immature endodontically treated central maxillary incisor under various loading conditions. MATERIALS AND METHODS: The study created six different study models in a virtual environment: healthy mature maxillary central teeth, intact immature maxillary central teeth, mature maxillary central teeth with fiberglass post associated with resin composite crown restoration, immature maxillary central teeth with fiberglass post associated with resin composite crown restoration, mature maxillary central teeth with fiberglass posts and zirconia restoration, and immature maxillary central teeth with fiberglass posts and zirconia restoration. Loading conditions simulating mastication, trauma, and bruxism were applied to each of the models at different angles and amounts. The von Mises and the maximum and minimum principal stress values in tooth structures (dentin) and support structures (bone, PDL) and materials were observed using finite element stress analysis. RESULTS: The highest stress values in the tissue and the restoration structure were observed for masticating force and crowns rehabilitated with zirconia restorations. None of the compared loading conditions and restorations showed destructive stress values on periodontal ligament or bone. CONCLUSION: The mature and immature endodontically treated central maxillary incisors can be better rehabilitated using fiberglass post associated with resin composite crown restoration and may be preferred to zirconia restorations in order to reduce the stresses on the surrounding tissues and teeth. However, further clinical studies are needed to fully explore this topic.

Effects of different irrigation activation methods on root canal treatment of primary teeth.

There is currently a lack of research on the application of newly developed irrigation techniques in root canal treatment of primary teeth. This study aimed to evaluate the effects of various irrigation activation techniques on two key parameters: apical debris extrusion (ADE) and dentinal tubule penetration depth (DTPD) of the root canal filling material. A total of 96 primary mandibular second molars were randomly divided into 4 groups: Group 1-Conventional Needle Irrigation (CNI), Group 2-XP-Endo Finisher (XPF), Group 3-EndoActivator (EA), and Group 4-Passive Ultrasonic Irrigation (PUI). In all groups, the One Reci single-file system was used for root canal preparation. For ADE measurement, each group was rinsed with distilled water. For DTPD assessment, sodium hypochlorite (NaOCl) was applied. ADE quantification was performed by collecting debris in pre-weighed Eppendorf tubes. A combination of fluorescent dye and root canal filling material (DiaPex Plus) was used for root canal filling. In order to examine DTPD, horizontal cross-sections of the coronal and apical regions of the teeth were taken with a thickness of 1 mm. The maximum and mean DTPD was examined by confocal laser scanning microscopy. Data were analyzed using the Kruskal-Wallis, One-way ANOVA, and Mann-Whitney U tests (p = 0.05). As a result, PUI had the highest mean ADE and CNI had the lowest mean ADE, while CNI had the highest mean DTPD in both the coronal and apical regions, whereas PUI had the lowest mean DTPD in the coronal region, and EA had the lowest mean DTPD in the apical region. There were no statistically significant differences in DTPD and ADE among the four groups. Comparing intragroup maximum DTPD across all groups, it was significantly higher in the coronal region than in the apical region (p < 0.05). ADE and DTPD of root canal filling materials in primary teeth did not differ significantly among CNI, XPF, EA and PUI irrigation activation techniques.

Novel AI-based tool for primary tooth segmentation on CBCT using convolutional neural networks: A validation study.

BACKGROUND: Primary teeth segmentation on cone beam computed tomography (CBCT) scans is essential for paediatric treatment planning. Conventional methods, however, are time-consuming and necessitate advanced expertise. AIM: The aim of this study was to validate an artificial intelligence (AI) cloud-based platform for automated segmentation (AS) of primary teeth on CBCT. Its accuracy, time efficiency, and consistency were compared with manual segmentation (MS). DESIGN: A dataset comprising 402 primary teeth (37 CBCT scans) was retrospectively retrieved from two CBCT devices. Primary teeth were manually segmented using a cloud-based platform representing the ground truth, whereas AS was performed on the same platform. To assess the AI tool's performance, voxel- and surface-based metrics were employed to compare MS and AS methods. Additionally, segmentation time was recorded for each method, and intra-class correlation coefficient (ICC) assessed consistency between them. RESULTS: AS revealed high performance in segmenting primary teeth with high accuracy (98 ± 1%) and dice similarity coefficient (DSC; 95 ± 2%). Moreover, it was 35 times faster than the manual approach with an average time of 24 s. Both MS and AS demonstrated excellent consistency (ICC = 0.99 and 1, respectively). CONCLUSION: The platform demonstrated expert-level accuracy, and time-efficient and consistent segmentation of primary teeth on CBCT scans, serving treatment planning in children.

Comparative evaluation of volumetric changes following rotary and hand files' canal preparation of primary maxillary canine: an in vitro nano-CT analysis.

PURPOSE: To evaluate the volumetric changes of two recently introduced paediatric rotary file systems in comparison with conventional hand file systems in primary maxillary canines using an ultra-high-resolution nano-computed tomography. METHODS: This in vitro study was performed in extracted primary maxillary canines based on certain inclusion and exclusion criteria. Samples were prepared, and working length was determined after the pre-operative scan using a high-resolution nano-CT device (SkyScan 2214, Bruker, Kontich, Belgium). A single well-experienced paediatric dentist prepared the canals using three file systems: Kedo-S plus, Kedo-SG blue and hand K-files. All samples were subjected to post-operative scans performed similar to pre-operative scans. Image reconstruction was performed with NRecon software for 3D volumetric visualisation and analysis of the root canals. RESULTS: Kedo-SG blue file systems had the highest mean difference in the canal volume (4.05%). Hand K-files had the least difference at (3.71%) of canal volume. Kedo-S plus file system had a moderate mean canal volume difference (3.82%) which is closer to hand K-files. Intergroup comparison between the three groups showed that the mean difference in canal volume was statistically significant between all three file systems (p = 0.000). CONCLUSION: Within the limitations of the current study, rotary file systems produced a significant enlargement of canals as compared to hand files. Kedo-SG blue created a uniform preparation of the canal cervico-apically. Kedo-S plus files were prepared more coronally with minimal preparation apically as close to the preparation of hand files. TRIAL REGISTRATION: Trial registration number: IHEC/SDC/PEDO-2103/22/651, Date of registration: 2022.

Labial inverse dilaceration of bilateral maxillary central incisors: A case report.

BACKGROUND: Dilaceration is a rare dental developmental anomaly characterized by an abrupt deviation along the longitudinal axis of the root in which an angulation forms between the root and the crown. Here, we report on dilacerated bilateral maxillary central incisors in mixed dentition. CASE SUMMARY: A 10-year-old girl presented with a chief complaint of unerupted central incisors. An oral examination and radiography provided the basis for a diagnosis of dilaceration of the maxillary central incisors. After surgical exposure of the impacted teeth, a button with an attached chain was applied to the palatal surface of teeth 11 and 21. After 8 mo, a button was bonded to the labial surface of the crown to fix an elastic chain and move the teeth toward the maxillary arch. Finally, a fixed appliance was applied to tooth alignment to Class 1 malocclusion using a 0.019 × 0.025-inch nickel-titanium wire. After 3 years of follow-up, the clinical findings and radiographic assessment showed that the roots had developed with vital dental pulp and healthy periodontium, were acceptable aesthetically, and showed no resorption. CONCLUSION: The rare occurrences of dilacerated bilateral maxillary central incisors can be successfully treated through surgical exposure and orthodontics.

Effect of wire diameter and extent of wire composite splint on the mobility of luxated and anchor primary teeth: A typodont study.

BACKGROUND/AIMS: The recommendations for splinting are well established for the injuries of permanent dentition; however, ambiguity still exists for the injuries in primary dentition. Hence, this study aimed to determine the most appropriate dimensions of stainless steel wire and its extent, for achieving the physiologic mobility in primary dentition. MATERIAL AND METHODS: This study was designed as an in vitro experiment by using a typodont model of primary dentition. The baseline mobility of primary maxillary incisors was calibrated to the physiologic mobility of natural primary incisors by using a Teflon tape wrapped around the roots of resin teeth. Splinting was done using a stainless steel wire of 0.2 mm (Group I), 0.3 mm (Group II), and 0.4 mm (Group III). These groups were subdivided (a, b, and c) on the basis of the extent of the splint, and pre splint mobility (Pre-PV) and post-splint mobility (Post-PV) were tested by Periotest M. The splint effect was calculated by subtracting Post-PVs and Pre-PVs. RESULTS: The normal values of mobility in healthy human volunteers ranged from 10.5 to 13. The overall splint effect was higher in Group III irrespective of the extent of the splint, whereas it was found to be the lowest in Group I (b and c). The splint effect increased with the extent of the splint in all the groups. Among all the groups, the splint effect on the anchor teeth was observed to increase with the extent of the splint and the diameter of the wire. CONCLUSION: The mobility of the injured and anchor teeth splinted with 0.2-mm stainless steel wire was similar to the pre-splint and physiologic mobility. The most favorable extension was one tooth adjacent to the injured tooth on each side for both 0.2- and 0.3-mm wires.

Prevalence of Bruxism in Children and Adolescents with Cerebral Palsy: Systematic Review and Meta-analysis.

AIMS: To perform a systematic review and meta-analysis compiling data on the prevalence of bruxism in children and adolescents with cerebral palsy. METHODS AND RESULTS: Searches were carried out in PubMed/Medline, Web of Science, and Scopus databases to identify the articles published by February 2023. Two independent reviewers, and in duplicate, employed a two-stage process to select publications. The same two reviewers performed the data extraction. Studies were included when the following eligibility criteria were met: performed in children and/or adolescents with cerebral palsy and reporting bruxism. Potentially eligible studies were read in full and excluded that: not presented numerical data on the prevalence of bruxism; not reported how the bruxism was assessed; not reported data about the cerebral palsy; and not an observational study. The risk assessment of bias was assessed by the Newcastle- Ottawa Scale. After reading the titles and abstracts of the 358 identified articles, eight articles from 1966 to 2020 were included. The main reason for not including the studies was not to report data about bruxism (59.3%), and 44.5% were excluded for not reporting data from patients with cerebral palsy. The studies were carried out in schools, university hospitals, or centers for patients with special needs (Brazil, the United States, and Egypt). The pooled prevalence of bruxism in children and adolescents with cerebral palsy was 46% (95%CI: 0.38-0.55) after removing one study. CONCLUSION: The pooled prevalence of bruxism in children with cerebral palsy can be considered high since almost half of the studied population is affected by this condition. PROSPERO #CRD42021225781.

Immediate implant placement with soft tissue grafting and an ultra-translucent zirconia crown. Replacement of a primary tooth in the esthetic zone

OBJECTIVES: The present case report describes the atraumatic extraction of a primary maxillary right canine followed by immediate implant placement with a customized zirconia abutment and monolithic ultra-translucent zirconia (5Y-PSZ) crown. CLINICAL CONSIDERATIONS: A 31-year-old patient presented to the clinic with the primary concern of mobility and gingival inflammation around the maxillary right canine. After clinical evaluation, the tooth was found to be a primary retained tooth that presented grade 3 mobility and gingival inflammation. Atraumatic tooth extraction was performed, followed by immediate implant placement of a screw-retained provisional restoration with the use of a surgical guide. The soft tissue was contoured until ideal architecture was obtained. The final restoration included a customized zirconia and titanium abutment and a characterized implant-supported monolithic 5Y-PSZ crown. CONCLUSIONS: Well-planned surgical and restorative procedures including atraumatic extraction, 3D implant planning for surgical guide fabrication, implant placement, and a customized zirconia abutment with a monolithic 5Y-PSZ crown can achieve high esthetic results in replacing a primary tooth in the esthetic zone.

Evaluating the Thickness of the Root Canal Dentin Wall in Primary First Molars Using Cone-beam Computed Tomography.

Aim: To evaluate the thickness of the root canal dentin wall in the cervical, middle, and apical third of primary first molars. Materials and methods: Cross-sectional study consisting of 30 cone-beam computed tomography (CBCT) images of primary maxillary and mandibular first molars, with crown, and root integrity. The wall dentin thickness of each canal was measured in three axial views, divided into distal (D), mesial, lingual/palatine, and buccal surfaces. Results: The smallest dentin wall thickness of the maxillary molar was located on the mesial surface of the mesiobuccal (MB) canal apical third (mean 0.55 ± 0.04 mm). The buccal and palatal (P) surfaces of the distobuccal (DB) and P canals showed the smallest dentin thickness on the cervical third (0.62 ± 0.02 mm). On the mandibular molar, we found the smallest dentin thickness on the apical third [lingual surface of the MB canal and buccal surface of the mesiolingual (ML) canal] with a mean of 0.41 ± 0.07 mm. Additionally, the dentin thickness is average of the D canal was about 0.67 ± 0.11 mm. Conclusion: It is essential to understand the primary first molar's anatomy to reduce possible complications in pediatric patients from instrumentation during root canal treatments. Clinical significance: Pulpectomy is among the most challenging procedures in pediatric dentistry and the knowledge of the root anatomy of primary teeth allows the professional to make better clinical decisions and reduce possible risks during root canal treatment. How to cite this article: Justiniano-Navarro C, Caballero-García S, López-Rodriguez G, et al. Evaluating the Thickness of the Root Canal Dentin Wall in Primary First Molars using Cone-beam Computed Tomography. Int J Clin Pediatr Dent 2023;16(S-2):S122-S127.

Natal teeth in premature neonates, products of twin gestation. A case report

Se presenta el caso de 02 recién nacidas gemelares, pre-términos tardíos, producto de gestación monocoriónica - biamniótica con presencia de dientes natales, los cuáles requirieron evaluación odontológica para definir la mejor conducta a seguir y con ello evitar riesgos o desenlaces fatales como la aspiración hacia bronquios. La evaluación evidenció escasa movilidad de piezas dentarias en ambos casos, por lo que se recomendó mantener los dientes; del mismo modo, se dio consejería a los padres sobre la higiene y cuidado de la salud bucal de sus hijas con control ambulatorio a los 3 meses.

We present the case of 2 twin newborns, late preterm, who were a product of monochorionic - diamniotic gestation and presented with natal teeth, which required a dental evaluation to define the best management strategy and thereby avoid risks or fatal outcomes such as bronchial aspiration. The evaluation showed little mobility of teeth in both cases, so it was recommended to keep the teeth. The parents were counseled on proper oral health care and hygiene for their daughters and scheduled for an outpatient follow-up at 3 months.

Evaluation of accuracy of an electronic apex locator in presence of sodium hypochlorite in primary teeth with and without resorption.

This study compared the accuracy of Root ZX mini apex locator in presence of sodium hypochlorite (NaOCl) in primary molars with and without apical resorption. Sixty-four extracted primary lower molar teeth with 32 root resorption and 32 without resorption were selected. To determine the actual working length (AWL), a K-file was inserted into the root canal until the tip of the file was visible at the major foramen or the resolution level. It was then withdrawn 1 mm. This value was recorded as AWL. The teeth were then divided subgroups (with/without NaOCl). To determine the electronic working length, a Root ZX mini apex locator in canals with/without NaOCl was used. A K-file was inserted into the canal to just beyond the foramen, as indicated by the flashing "APEX" bar, and the electronic working length was determined by subtracting 1 mm from this length. The deviation of the Root ZX mini measurement from the AWL was determined. Student's t-test was used for statistical analysis. In teeth with no resorption, the measurement accuracy rates (within+/-0.5 mm) of non-NaOCl and NaOCl groups were 84.37% and 81.25%, respectively (p > 0.05); within+/-1 mm, the non-NaOCl and NaOCl demonstrated 100% and 96.87% accuracy, respectively (p > 0.05). In teeth with resorption, the measurement accuracy rates (within+/-0.5 mm) was 81.25% for the non-NaOCl and 62.50% for the NaOCl, respectively (p < 0.05). The measurement accuracy rates (within+/-1 mm) of the non-NaOCl and NaOCl was 96.87% and 84.37%, respectively (p < 0.05). The presence of NaOCl in the root canal affected the accuracy of the Root ZX mini in primary teeth with apical resorption, but not in teeth without resorption.

Shaping ability of a pediatric motor-driven instrumentation system in primary molar root canal prototypes

Abstract Evaluate the shaping ability and preparation time using a pediatric motor-driven rotary instrumentation compared to other systems in resin prototypes of primary molars. Methods: Thirty specimens were scanned in micro-CT and divided into three groups according to the instrumentation type: pediatric motor-driven Sequence baby File (SBF); conventional motor-driven (Sequence Rotary File - SRF); manual K file. Instrumentation time was timed. After preparation, the specimens were scanned again. The pre- and post-instrumentation images were superimposed to measure the amount of root canal deviation and the resin remnant thickness. ANOVA followed by the Tukey test analyzed the comparisons between groups (p<0.05). Results: No statistically significant differences occurred in root canal deviation among groups (p>0.05). There were statistically significant differences in the comparison among root thirds (p<0.001) but without significant differences in the interaction group vs. root third (p>0.05). Both motor-driven instrumentations showed statistically greater weariness than manual instrumentation (p<0.001), without significant significant differences between SBF and SRF. Motor-driven instrumentation had a shorter working time than manual instrumentation (p<0.001). Conclusion: Pediatric motor-driven instrumentation demonstrated good outcomes in relation to root canal deviation and amount of remnant structure, with shorter instrumentation time. SBF can be a suitable alternative for endodontic instrumentation in primary molars.

Resumo Objetivo: Avaliar os resultados da instrumentação endodôntica e o tempo de preparo de lima odontopediátrica ativada por motor (Sequence Baby File- SBF) em canais de molares decíduos prototipados. Métodos: Trinta espécimes foram escaneados em micro-CT e divididos em três grupos de acordo com o tipo de instrumentação: mecanizada odontopediátrica (SBF); mecanizada convencional; lima K manual. O tempo de instrumentação foi cronometrado. Após o preparo, os espécimes foram escaneados novamente. As imagens pré e pós-instrumentação foram sobrepostas e a quantidade de desvio do canal radicular e a espessura de resina remanescente foram mensurados. Para as análises de comparações entre os grupos foram realizados teste ANOVA seguido do teste de Tukey (p<0,05). Resultados: Não ocorreram diferenças estatisticamente significativas entre os grupos no desvio do canal radicular (p>0,05). Houve diferenças estatisticamente significativas na comparação entre terços radiculares (p<0,001), mas sem diferenças significativas na interação grupo vs. terço radicular (p>0,05). A instrumentação mecanizada apresentou desgaste estatisticamente maior do que a instrumentação manual (p<0,001), sem diferenças estatísticas entre a SBF e a lima mecanizada convencional. A instrumentação mecanizada teve menor tempo de trabalho quando comparado a instrumentação manual (p<0,001). Conclusão: A instrumentação mecanizada odontopediátrica demonstrou bons resultados em relação ao desvio do canal radicular e quantidade de estrutura remanescente, com menor tempo de instrumentação. A SBF pode ser uma alternativa adequada para a instrumentação endodôntica em molares decíduos.

Decoding early childhood caries: an in-depth analysis of YouTube videos for effective parental education.

PURPOSE: To assess the coverage of information about early childhood caries (ECC) available on YouTube videos in three different languages, regarding technical characteristics of videos and interaction metrics. METHODS: Search strategies were developed in English, Spanish, and Portuguese to make a comprehensive collection of videos from YouTube, encompassing 60 samples for each language, regarding all video types. The videos were assessed by a thematic checklist regarding 17 items on ECC. Videos were dichotomized according to the median of the thematic score and the nature of their authorship (health and non-health authors) to compare groups. The statistical analysis was performed using the Statistical Package for Social Science (version 25.0), applying Spearman's rank correlation coefficient and Mann-Whitney U test. P < 0.05 values were considered significant. RESULTS: Among 120 videos meeting inclusion criteria, ECC aetiology and prevention information proved incomplete, with a median score of 5 (Q1-Q3 = 3-7). No correlation emerged between this score and other video characteristics. However, interaction metrics like views, likes, dislikes, and viewing rates displayed significant correlations. Health authors primarily created these videos, yet non-health author channels had more subscribers. Surprisingly, videos focused on the impact of regular sugary food and beverage consumption on ECC progression received the most attention. CONCLUSIONS: Videos that presented information about the aetiology and prevention of ECC invariably focused on partial aspects of the disease. This highlights the need for better-quality educational videos and the importance of dental professionals in guiding patients toward reliable sources of information.

Incidence and risk factors of unplanned retreatment following dental general anesthesia in children with severe early childhood caries.

Objective: This study aimed to retrospectively describe the unplanned retreatment of dental general anesthesia (DGA) in children with severe early childhood caries (S-ECC) and explore potential factors that may influence the outcome of DGA treatment. Methods: Medical records of children with S-ECC who received DGA treatment were screened, and necessary data were extracted. The Kaplan-Meier method and Cox proportional hazards model were used to estimate the DGA survival rate and explore the potential factors affecting the success rate of DGA treatment. Results: Medical records of 852 children were included; 509 (59.7%) children with 1,212 (10.7%) teeth underwent unplanned retreatment. Restoration failure (30.12%) and new caries (29.46%) accounted for the most significant proportion of all failures. The median survival times were 510 and 1,911 days at the child and tooth levels, respectively. Unplanned retreatment risk was associated with the age of S-ECC children, frequency of follow-up, and fluoride application (hazard ratio = 0.97, 0.78, 0.69, P < 0.001). Conclusion: The treatment outcome of DGA administered to children with S-ECC was satisfactory at the tooth level from the perspective of the incidence of unplanned retreatment. Restoration failure was the main reason for the high unplanned retreatment rate. Strategies for a better outcome of DGA include improving the professional knowledge and skills of pediatric dentists and enhancing compliance of parents/patients. Health education and regular topical fluoride application may improve the success rate of DGA treatment.

Concentration-dependent effect of carboxymethyl chitosan amorphous calcium phosphate on the surface hardness of primary tooth enamel.

PURPOSE: To compare the effects of gels containing 2.5% and 5% carboxymethyl chitosan amorphous calcium phosphate (CMC-ACP) on the microhardness of primary tooth enamel. METHODS: Twenty-four tooth specimens were demineralized with 37% phosphoric acid and divided into four groups: an untreated control group, a positive control group treated with casein phosphopeptide amorphous calcium phosphate, and two groups treated with 2.5% and 5% CMC-ACP gel, respectively. The enamel surface hardness was then measured with a Vickers hardness tester. RESULTS: In terms of Vickers Hardness Number (VHN), the degree of alteration in tooth surface microhardness was 77.83 ± 13.44 in the 5% CMC-ACP group and 52 ± 6.93 in the 2.5% CMC-ACP group (P = 0.002). The inter-group difference in the surface hardness change was significant (P < 0.05). CONCLUSION: The 5% CMC-ACP gel increased the hardness of primary tooth enamel to a greater degree than the 2.5% CMC-ACP gel.

Nano-hydroxyapatite preparation for the remineralization of primary tooth enamel surface subjected to liquid medication: An observational study.

Background and Aims: Acid-induced demineralization may be caused by the consumption of liquid medications routinely administered to children. Therefore, different remineralizing agents, such as fluorides and nano-hydroxyapatite, have been added to oral care products to remineralize erosive lesions. This study was conducted to compare the effectiveness of 1% nano-hydroxyapatite suspension and 2% sodium fluoride solution on the surface texture of primary teeth enamel previously exposed to liquid drugs. Methods: Thirty posterior primary teeth were extracted and grouped depending on the remineralizing agent used: (A) nano-hydroxyapatite and (B) sodium fluoride. Groups A and B were subjected to liquid medication in two subgroups: cephalexin (cephalexin monohydrate) and ParAzar (acetaminophen), followed by remineralization with 1% nano-hydroxyapatite suspension and 2% sodium fluoride solution. An atomic force microscope was used to analyze the surface texture of the primary tooth enamel by measuring the roughness and waviness parameters of the tested surfaces. The examination was performed at baseline, 7 days after exposure to drugs, and after exposure to remineralizing agents. Results: A significant difference in enamel surface roughness between nano-hydroxyapatite-treated surfaces and sodium fluoride-treated surfaces was observed. A significant change was observed in the surface waviness of the primary enamel surface of sodium-fluoride-treated teeth that were subjected to cephalexin. Conclusion: Routine use of liquid medications could have a negative impact on primary enamel surface topography, because the primary tooth enamel is less mineralized than permanent tooth enamel. Our results show that compared with a 2% sodium fluoride solution, a 1% nano-hydroxyapatite suspension can be used for remineralizing and restoring defects of the enamel surface of primary teeth following exposure to liquid medication, thus reinforcing dental tissues with higher efficacy.

Prevalence of Primary Tooth Extraction and Its Associated Factors Among Under-Five-Year-Old Children in Debre Tabor Town, North-Central Ethiopia: Community-Based Cross-Sectional Study.

Introduction: In Ethiopia, primary tooth extraction is a process of pulling out of an infant's healthy primary teeth by traditional healers or family members. Traditional healers use unsterile equipment to perform teeth extraction blindly, as a result, the child is prone to different life-threatening complications such as anemia and infectious blood-borne diseases. Despite all of these consequences, it is one of the neglected health problems, especially for developing countries. Thus, this study aimed to assess the prevalence and associated factors of primary tooth extraction among under-five year's children in Debre Tabor Town, Northcentral Ethiopia. Methods: A community-based cross-sectional study was conducted among 370 participants, from March 2020 to April 2020 in Debre Tabor town. A multistage sampling technique was employed to select study participants. The data were collected by using a semi-structured pretested questionnaire via face-to-face interviews. The data was exported to SPSS version 20 software for analysis. Both binary and multiple logistic regression have been used to observe the association between the outcome variable with each independent variable. Finally, a 95% confidence interval was computed and variables with P-value ≤0.05 were considered statistically significant. Results: The prevalence of primary teeth extraction among under-five-year children in Debre Tabor town was found to be 11.1% [95% CI: 7.8-14.2]. Being able to read and write in educational status [AOR: 3.97 (1.20-13.09)], having a mother caregiver [AOR: 0.35 (0.15-0.82)], having poor awareness [AOR: 6.15 (1.56-27.56)], and having a previous history of using traditional medicines [AOR: 6.65 (3.09-14.34)] were significantly associated with primary tooth extraction. Conclusion: The prevalence of primary tooth extraction was found to be high. Educational status, caregiver of the child, level of awareness, and previous history of using traditional medicines were factors associated with primary tooth extraction.

Comparison of the opinions and attitudes of medical doctors, dentists and mothers toward teething symptoms.

BACKGROUND: The signs and symptoms associated with teething can be local or systemic. It remains unclear whether the disturbances are caused by the eruption of primary teeth or whether they simply coincide with tooth eruption. Parents and healthcare professionals can have different perceptions about teething symptoms, especially in different cultural or socio-economic contexts. OBJECTIVES: The study aimed to compare the opinions and attitudes of medical doctors, dentists and mothers toward the symptoms of teething. MATERIAL AND METHODS: Data about the signs and symptoms was collected using a researcher-made questionnaire. The questionnaire was mailed in December 2019 to 800 randomly selected medical doctors and dentists working in the Central Aegean Region of Turkey. Mothers of children aged 0-3 years who were referred to the pediatric department were selected for the study. Data from 199 medical doctors (109 family physicians, 90 pediatricians), 293 dentists (169 general dentists, 124 pediatric dentists) and 352 mothers who completed the questionnaire was included in the study. The data was analyzed using the IBM SPSS Statistics for Windows program. RESULTS: Each participant identified at least one symptom related to teething. Statistically significant differences were found between the 3 groups in terms of symptoms except for stomach ache (p < 0.05). Gingival irritation was the most common symptom among dentists (95.6%) and mothers (70.7%), while irritability was the most common symptom among medical doctors (90.5%). Mothers believed to a greater extent than the other groups that fever, vomiting and cough were associated with teething (p < 0.05), whereas medical doctors tended to point to drooling, irritability, biting/chewing, diarrhea, and ear rubbing more often than the other groups (p < 0.05). In addition, sleep disturbance and loss of appetite were associated with teething less frequently by mothers as compared to the other groups (p < 0.05). CONCLUSIONS: In the present study, medical doctors, dentists and mothers reported unproven and controversial associations between teething and certain local or systemic symptoms. Mothers especially were more likely to believe that systemic symptoms that can be confused with other serious diseases were associated with teething.

Splinting in the management of dental trauma in the primary dentition: a systematic review.

PURPOSE: The purpose of this study was to gather existing data on the efficacy of tooth splinting (TS) in patients with traumatized primary teeth, evaluating their overall prognosis and reported complications. METHODS: Electronic searches were performed in seven databases up to Februray/2023. Clinical studies published in the last two decades and presenting the following characteristics were included: (a) reporting on children with traumatized primary teeth; (b) describing the efficacy of splinting those teeth. Studies describing imobilization of dental avulsion were excluded. RESULTS: A total of 163 potentially relevant studies were initially found. After title/abstract screening, and full-text evaluation, three retrospective studies with moderate to high risk of bias were included. The studies described the outcomes of TS in primary teeth with luxation (intrusion, extrusion, lateral displacement), intra-alveolar root fracture, and/or alveolar fracture. High clinical success rate was observed for teeth with root fracture. Benefits of spliting teeth with lateral luxation were not identified, although it may be a reccomended approach. No study was found evaluating TS for alveolar fracture. CONCLUSION: Based on a low level of evidence, the findings highlight a better clinical success rate of the use of TS in the management of deciduous teeth with root fractures.