Incidence of ProTaper Universal System Instrument Fractures - A Retrospective Clinical Study.

OBJECTIVE: The aim of this retrospective clinical study was to evaluate the incidence of ProTaper Universal System instrument fractures, associated with observation of the arch, group of teeth, and root thirds in which these fractures occurred. METHODS: From analysis of charts, clinical record cards and radiographs of endodontic treatments performed by postgraduate students using the ProTaper Universal System at a reference center, a total of 1031 teeth and 2355 canals were analyzed. The general incidence of instrument fractures and their frequency, considering the group of teeth, arch and root thirds, were cataloged and the data obtained were statistically analyzed (Exact Fischer test, with level of significance of 1%). RESULTS: The general percentage of fractures, considering the number of teeth and number of root canals evaluated was 4.4% and 1.9%, respectively. Instrument fractures occurred more frequently in the mandibular first (8.8%) and second (9.6%) molars, however, without statistically significant difference between them (P=0.81). In the first and second maxillary molars, the incidence of fracture was 4.7% and 5.1%, respectively, also without significant difference (P=0.81). Considering the dental arches (maxillary and mandibular), the fractures occurred with significantly higher frequency in the mandibular arch (66.7%), in comparison with the maxillary arch (33.3%) (P<0.01). A significantly higher percentage of fractures occurred in the apical third (84.4%) compared with the middle third (15.6%) (P<0.01). CONCLUSION: The general percentage of fractures, considering the number of teeth and number of root canals evaluated was 4.4% and 1.9%, respectively. However, the arch (mandibular) and root third (apical) had a significant effect on the incidence of instrument fractures.

Automatic Electronic Device Used for the Evaluation of Cyclic-Fatigue Resistance of Nickel-Titanium Instruments

he aim of this study was to evaluate the cyclic-fatigue fracture of different Nickel-Titanium motor-driven rotary instruments (ProTaper® Universal, ProFile®, and Mtwo® systems) in artificial canals by means of an Automatic Electronic Device (AED). The study was performed using NickelTitanium instruments 25/0.06 evaluated in canals with a 45-degree curvature and 2-mm radius. The analyses evaluated two parameters: fracture by cyclic fatigue, and time of fracture; in addition, the length of separated fragment was evaluated. Medians and range values were calculated for each group. Data were analyzed by the Kruskall-Wallis and Mann-Whitney U tests to determine statistical difference. The ProFile motor-driven rotator system exhibited highest resistance to fracture due to cyclic fatigue and highest fracture time compared with the ProTaper and Mtwo systems (p <0.05). The equipment proposed in this study (AED) demonstrated efficiency for recording information, automation, scheduled work times and durations, cycle number, time of fracture, pressure changes and, principally control of the human factor.

l objetivo del presente estudio fue evaluar la fractura a la fatiga cíclica de diferentes instrumentos rotatorios de Niquel-Titanio (sistemas ProTaper® Universal, ProFile® y Mtwo®) en conductos artificiales por medio de un Dispositivo Electrónico Automático (DEA). Se usaron instrumentos de Niquel-Titanio 25/0.06, los cuales se evaluaron en conductos con una curvatura de 45 grados y 2 milímetros de radio. Se analizaron dos parámetros: Fractura a la fatiga cíclica y tiempo a la fractura; además se evaluó la longitud del fragmento separado. Medianas y rangos fueron calculados para cada uno de los grupos. Los resultados fueron analizados por las pruebas de Kruskall-Wallis y U de Mann-Whitney para determinar diferencias estadísticas. El Sistema ProFile mostró una mayor resistencia y tiempo a la fractura en comparación con los sistemas ProTaper y Mtwo (p <0.05). El equipo propuesto en este estudio (DEA) demostró eficiencia para el registro de la información, tiempos de trabajo y duración, número de ciclos, tiempo a la fractura, cambios en la presión y principalmente control del factor humano.

On the Causality Between Dentinal Defects and Root Canal Preparation: A Micro-CT Assessment

Abstract This study aimed to evaluate the cause-effect relationship between canal preparation with ProTaper Universal (PTU) system and dentinal defects formation using micro-computed tomography (micro-CT) analysis. Forty mesial canals of mandibular molars with a type II Vertucci's canal configuration were scanned at an isotropic resolution of 14.16 µm. The sample was assigned to an experimental (n = 30) and a control (n = 10) groups, and the mesial canals were prepared with PTU system up to F2 instrument. The specimens from the experimental group were scanned and the cross-section images of the mesial roots, before and after preparation, were screened to identify the presence of dentinal defects. In the control group, the specimens were sectioned perpendicularly to the long axis of the root into 1-mm-thick slices (n = 80) and examined under optical microscope. Once a dentinal defect was detected, the slice was scanned through micro-CT. In the experimental group, dentinal micro-cracks were observed in 4,828 slices (24.04%). In all cross-section images, dentinal defects identified in the postoperative images were already present in the corresponding preoperative image. In the control group, 13 out of 80 slices (16.25%) had at least one dentinal defect visualized under stereomicroscopy, which was identified after a further micro-CT scanning. Micro-CT showed reliability as similar as optical microscopy in detecting dentinal defects, adding the possibility of tracking the dentinal tissue, before and after canal preparation, and providing a clear visualization of micro-cracks. Root canal preparation with PTU system did not induce the formation of new dentinal defects.

Resumo O objetivo deste estudo foi avaliar a relação de causa-efeito entre o preparo do canal radicular com o sistema ProTaper Universal (PTU) e a formação de defeitos dentinários usando a análise por micro-tomografia computadorizada (micro-CT). Quarenta raízes mesiais de molares inferiores com a configuração tipo II de Vertucci foram escaneadas com resolução isotrópica de 14.16 μm. A amostra foi distribuída em um grupo experimental (n = 30) e um grupo controle (n = 10), e os canais mesiais foram preparados com o sistema PTU até a lima F2. As amostras do grupo experimental foram escaneadas e as imagens de secção transversal das raízes mesiais, antes e após o preparo, foram analisadas ​​para identificar a presença de defeitos dentinários. No grupo controle, os dentes foram seccionados perpendicularmente em relação ao longo eixo da raiz em fatias de 1 mm de espessura (n = 80) e examinados ao microscópio óptico. Uma vez detectado um defeito dentinário, a fatia foi escaneada através da micro-CT. No grupo experimental, defeitos dentinários foram observados em 4.828 secções transversais (24,04%). Em todas as imagens de secção transversal, os defeitos dentinários após os procedimentos experimentais já estavam presentes na secção pré-operatória correspondente. No grupo controle, 13 das 80 fatias (16,25%) apresentaram pelo menos um defeito dentinário visualizado através do microscópio, o qual foi identificado em um escaneamento posterior. A micro-CT mostrou confiabilidade com a microscopia óptica para detecção e visualização dos defeitos dentinários, permitindo acompanhar o tecido dentinário antes e depois do preparo do canal. O preparo do canal radicular com o sistema PTU não induziu a formação de novos defeitos dentinários.

Eficiencia de tres técnicas en la remoción de gutapercha / Efficiency of three different techniques in the removal of gutta-percha

Cuando la terapia endodóntica fracasa, las opciones para solucionar este problema incluyen preservar el diente a través del retratamiento ortógrado o cirugía apical. Siempre que sea posible, el retratamiento endodóntico no quirúrgico debe ser la opción elegida. Diferentes sistemas rotatorios han sido propuestos como una alternativa a la instrumentación manual para la remoción de la gutapercha.El objetivo de este trabajo fue comparar la eficacia y la eficiencia en la desobturación total del canal radicular, utilizando dos tipos de instrumentos rotatorios: limas Protaper Universal® y limas Protaper Retratamiento® con limas manuales tipo K. Se instrumentaron 45 canales radiculares, con limas mecanizadas del sistema Mtwo®, hasta la 25/06 y terminados de conformar con lima K #40 e irrigados con hipoclorito de sodio al 2,5 % entre cada instrumento. Los dientes fueron obturados con técnica de condensación lateral, utilizando conos de gutapercha y cemento Tubliseal®.La muestra se dividió al azar en tres grupos A, B y C, de 15 canales cada uno, el grupo A se desobturó con limas Protaper Universal. El grupo B se desobturó con limas Protaper retratamiento y el grupo C se desobturó totalmente con limas K. Se cronometró cada procedimiento de desobturación y al término de esta, se tomó una radiografía en sentido buco-lingual y otra en sentido mesio-distal para cuantificar la remoción de gutapercha en cada grupo. Los resultados muestran que no existe diferencia significativa en la eliminación total del relleno endodóntico entre los tres grupos (p= 0,271) pero que los tiempos empleados en la desobturación total de los canales entre los grupos, muestra diferencias significativas entre Protaper Retratamiento y limas K, y entre Protaper Universal y limas K (p <0,05). Bajo las condiciones de este estudio, ningún sistema fue capaz de remover toda la gutapercha del interior del canal radicular.

When primary endodontic treatment fails, the treatment alternatives for root preservation are orthograde retreatment or apical surgery. Whenever possible, orthograde retreatment must be the first option. Different rotary systems have been proposed as an alternative to manual instrumentation for the removal of gutta-percha. The aim of this study was to compare the efficacy and efficiency of the total removal of gutta-percha from root canals, using two types of rotary instruments: Protaper Universal Files® and Protaper Retreatment Files®, compared to manual K type Files. A total of forty-five canals were instrumented with Mtwo files® up to a 25.06 file and the shaping was completed with a 40 K-type File and irrigated with 2.5 % Sodium Hypochlorite between each instrument. The teeth were obturated with Lateral Condensation Technique, using gutta-percha and Tubliseal® sealer. Samples were divided in groups A, B and C, 15 canals each, and gutta-percha was removed using the following protocols: group A with Protaper Universal; Group B using Protaper Retreatment and Group C using K type Files. Each procedure was timed and at the end of it, two periapical radiographs were taken: one buccolingual and one mesiodistal, in order to quantify the amount of gutta-percha removed. The results analysis show that there is no significant difference in the amount of gutta-percha removed between the three groups (p= 0.271) but that the time invested to perform the removal of the gutta-percha was significantly less between for the rotary systems, when compared to manual instrumentation (p <0.05). Under the conditions of this study, no system was able to remove all gutta percha inside the root canal.

Evaluación ex vivo del material de obturación extruido durante el retratamiento endodóntico con el empleo de dos técnicas de remoción / Ex vivo evaluation of the amount of extruded filling material during endodontic retreatment using wo removal techniques

Objetivo: evaluar ex vivo la cantidad de material de obturación durante el retratemiento endodóntico ortógrado con el uso de dos técnicas de desobturación. Materiales y métodos: se utilizaron 30 caninos humanos extraídos, de conducto único y raíces rectas. Los conductos se instrumentaron con ProGlider (Dentsply/Maillefer, Ballaigues, Suiza) y ProTaper Next X1, X2 y X3 (Dentsply/Maillefer, Ballaigues, Suiza) hasta la longitud de trabajo (LT), luego, se sobrepasó 1 mm del foramen apical con una lima tipo K #20. A continuación se obturaron con conocs de gutapercha ProTaper Next X3 (Dentsply / Maillefer, Ballaigues, Suiza), condensación lateral y termocompactación. Como sellador endodóntico, se utilizó el AHPlus (Dentsply DeTrey, Konstanz, Alemania), coloreado con tinta china azul. Los especímenes se dividieron aleatoriamente en dos grupos de 15 dientes. Las raíces se montaron en tubos Eppendorf, que fueron pesados previamente en una balanza de precisión. En el grupo 1 (n=15) se removió la gutapercha con instrumentos D1, D2 del sistema ProTaper Universal, hasta el tercio medio y luego hasta la LT con D3 y limas Hedstroem #40 (Dentsply/Maillefer, Ballaigues, Suiza), empleando xilol. La remoción se completó con ProTaper Next x4 hasta la LT. En el grupo 2 (n=15) se removió la gutapercha con el sistema ProTaper Universal D1, D2 y D3 hasta el tercio apical y se completó con ProTaper Next x4 hasta la LT. En ambos grupos se realizaron lavajes con 3 ml de agua destilada a cada cambio de instrumento y al finalizar la instrumentación. Se retiraron las tapas con los especímenes de los tubos Eppendorf, los cuales fueron colocados en una estufa de cultivo a 27ºC durante 5 días. Los tuvos se pesaron nuevamente (sin sus tapas) para determinar la diferencia de peso correspondiente al material de obturación extravasado. La comparación de las diferencias de peso promedio entre los dos grupos se realizó mediante la prueba no paramétrica de Mann-Whitney.

Análise comparativa da eficiência de corte de instrumentos rotatórios de níquel-titânio ProTaper NEXT e ProTaper Universal / Comparative analysis of the cutting efficiency of rotational instruments of nickel-titanium ProTaper NEXT and ProTaper Universal

Os instrumentos rotatórios fabricados em Níquel-Titânio possuem características geométricas e dimensionais que influenciam sua eficiência de corte. Torque e força apical exercidos durante o preparo de canais radiculares são parâmetros que definem esta propriedade mecânica. Neste estudo avaliou-se o torque e a força apical exercidos por instrumentos ProTaper Universal (PTU) S2 e F1 e ProTaper NEXT (PTN) X1 e X2, que apresentam diâmetros semelhantes e geometrias diferentes. Os ensaios foram realizados em dispositivo de bancada, onde 10 instrumentos de cada tipo foram testados em blocos de acrílico préfabricados, contendo um canal artificial previamente explorado com limas rotatórias PathFile #13 e #16. Acionados por um motor endodôntico com velocidade de 300 rotações por minuto (rpm) e torque de 4,0 Newton por centímetro (Ncm), os instrumentos foram inseridos no canal a uma velocidade constante de 0,09 mm/seg. Enquanto uma célula de carga registrou a força axial exercida, um multímetro acoplado ao motor endodôntico registrou o torque requerido pelo instrumento durante seu deslocamento ao longo do canal. Os ensaios foram realizados utilizando um bloco novo para cada sistema, na sequência de S2 e F1 para PTU, e X1 e X2 para PTN. Os resultados mostraram que os instrumentos do sistema PTU apresentaram menores valores de força apical e torque, quando comparados com PTN

The NiTi instruments have geometrical and dimensional characteristics that could play an important hole in the cutting efficiency. Torque and apical force exerted during the root canal preparation are parameters that define this mechanical property. This study evaluated the apical force and torque required by the instruments ProTaper Universal (PTU) S2 and F1, and ProTaper NEXT (PTN) X1 and X2, with similar diameters and different geometries, to penetrate standardized acrylic blocks containing an artificial canal previously explored with rotary instruments Pathfile #13 and #16. The parameters were determined using a bench-testing machine, where the instruments were set to move against the artificial canal in a constant speed of 0.09 mm/sec. The X-Smart Plus motor, with a rotational speed of 300 rpm and torque limitation of 4N.cm, was employed to drive the instruments and the load cell of the machine recorded the apical force exerted, while a digital multimeter attached to the endodontic motor recorded the torque required during the work of the instrument along the canal. Ten instruments of each type were tested using a new acrylic block for each system, in a sequence of S2 and F1 for PTU, and X1 and X2 for PTN. The results showed that the instruments of the PTU system displayed lower torque and apical force during the test, when compared to PTN instruments

Influence of Apical Patency and Cleaning of the Apical Foramen on Periapical Extrusion in Retreatment

This study evaluated the influence of apical patency, root filling removal technique and cleaning of the apical foramen, concerning the amount of debris extruded during root canal retreatment. Forty mandibular incisors were randomly assigned to 4 groups - GIM (n=10), GIIM (n=10), GIPT (n=10) and GIIPT (n=10), which were named according to leaving (I) or not (II) apical patency during canal preparation and filling removal technique (manual - M or ProTaper system - PT). After filling material removal, each specimen of each group had the apical foramen cleaned by sizes 15, 20 and 25 instruments, generating 12 subgroups: GIM15, GIM20, GIM25, GIIM15, GIIM20, GIIM25, GIPT15, GIPT20, GIPT25, GIIPT15, GIIPT20 and GIIPT25. Extruded filling debris was collected by a Milipore filtration system, an HV-durapore, 0.45 µm pore filter with a 25 mm diameter. The filters were weighed before and after the collection on an analytical scale (10–5 g), and the difference was calculated. The mean weight of extruded filling debris was analyzed statistically by Kruskal-Wallis and Friedman ANOVA tests (α=0.05). The mean values found in the groups (in mg) were: GIM (0.95±0.94), GIIM (0.47±0.62), GIPT (0.30±0.31) and GIIPT (0.32±0.44). There was no statistically significant difference among any of the groups or subgroups (p>0.05). ProTaper provided the smallest amount of extruded filling material, regardless of presence or absence of apical patency, followed by manual technique, without and with apical patency. Additional amounts of debris were collected during cleaning of the apical foramen, regardless of the instrument, presence/absence of patency or root filling removal technique.

Este estudo verificou a influência da patência apical, técnica de desobturação e limpeza foraminal na quantidade de material sólido extruído, durante retratamento endodôntico. Quarenta incisivos inferiores foram divididos aleatoriamente em quatro grupos - GIM (n=10), GIIM (n=10), GIPT (n=10) e GIIPT (n=10) - nomeados de acordo com a realização (I) ou não (II) de patência apical durante o preparo de canais e a técnica de desobturação - manual (M) ou sistema ProTaper (PT). Após a desobturação, realizou-se a limpeza foraminal em cada espécime de todos os grupos com instrumentos #15, #20 e #25, gerando 12 subgrupos: GIM15, GIM20, GIM25, GIIM15, GIIM20, GIIM25, GIPT15, GIPT20, GIPT25, GIIPT15, GIIPT20 e GIIPT25. O material sólido extruído foi coletado pelo sistema de filtração Millipore®, com filtros de 0,45 µm de poro e 25 mm de diâmetro. Os filtros foram pesados antes e após a coleta, em balança analítica de precisão (10–5g), e as diferenças foram calculadas. Os valores médios encontrados (em mg) foram: GIM (0,95±0,94), GIIM (0,47±0,62), GIPT (0,30±0,31) e GIIPT (0,32±0,44), sem diferença estatística entre quaisquer dos grupos ou subgrupos (p>0,05). O sistema Protaper proporcionou a menor quantidade de material sólido extruído, independente da presença ou não de patência apical seguidos da técnica manual sem e com patência apical. Quantidades adicionais foram coletadas durante a limpeza foraminal, independente do instrumento utilizado, da presença ou não da patência apical ou da técnica de desobturação.

Instrumentación rotatoria en endodoncia: reporte de casos clínicos / Rotary instrumentation in endodontics: clinical cases report

Los recientes avances en endodoncia de los últimos años, como la introducción de instrumentación rotatoria con limas de Niquel Titanio (NiTi), han simplificado el proceso del tratamiento, mejorando el éxito a largo plazo en términos de tiempo, efectividad y reducción de riesgos, comparados con la instrumentación manual con limas de acero inoxidable. Sin embargo, para algunos clínicos resulta difícil seleccionar el sistema rotatorio NiTi más apropiado, debido a la numerosa cantidad de instrumentos que conforman los diferentes sistemas existentes en el mercado. El presente reporte, basado en casos clínicos de la práctica diaria, tiene como objetivo mostrar, analizar y destacar la posibilidad de realizar tratamientos endodónticos predecibles con la técnica corono apical utilizando el sistema ProTaper Universal.

Advances in recent years in endodontics, such introduction of rotary Niquel Titanium (NiTi) instrumentation have simplified the treatment process and improved the long term success in terms of procedural time, accuracy, and risk reduction compared with the previously used, manual, stainless steel files. However, selecting the most appropriate NiTi system remains difficult for clinicians because of the large number of NiTi rotary instruments available nowadays on the market. This paper aims to show, analyze and emphasize, on the basis of every day clinical practice, the possibility of realizing predictability root canal preparations with the crown down technique of ProTaper Universal system.

Comparison of the centering ability of the ProTaper Universal, ProFile and Twisted File Rotary Systems

Aim: To determine the centering ability of Twisted File™ rotary system compared with ProTaperUniversal™ and ProFile™ rotary systems by evaluating pre- and postoperative cross-sectionalimages of the apical root canals third. Methods: Thirty mesiobuccal canals of human mandibularfirst molars were divided into three groups with 10 root canals each according to the instrumentused: group 1, ProTaper Universal™ rotary system; group 2, ProFile™, and group 3, TwistedFile™. Pre- and postoperative images of the apical thirds were viewed with a stereoscopicmagnifier with ×10 magnification and were captured digitally for further analysis using the ImageTools Software. The results were analyzed statistically by the Kruskal-Wallis test and the Mann-Whitney test. A level of significance of 0.05 was adopted. Results: The means of the buccolingualmeasurement ranged from 0.79 to 1.5. The largest deviation was registered to instrument 25.06in group 2. The means of the mesiodistal measurement ranged from 0.86 to 1.52, with the largestdeviation being registered to instrument 25.04 in group 3; however, there were no statisticallysignificant differences (p>0.05) among the three groups or among the instruments in the samegroup in terms of centering ability. Conclusions: None of the rotary systems evaluated in thisstudy was totally effective in performing biomechanical preparation of the root canals.

Comparison of root canals obturated with ProTaper gutta-percha master point using the active lateral condensation and the single-cone techniques: a bacterial leakage study

Aim: The aim of the present study was to assess the recontamination time of root canals filled with ProTaper gutta-percha master point using the active lateral condensation and the single-cone techniques. Methods: Fifty premolars, after biomechanical preparation, were randomly divided into six groups according to the obturation technique and the diameter of the gutta-percha point. For leakage evaluation, the roots were mounted in a dual-chamber leakage model system using Pseudomonas aeruginosa, Enterococcus faecalis, Escherichia coli, and Staphylococcus aureus. The Kaplan-Meier and Long-Rank tests were employed at the .05 level of significance. Results: The recontamination was detected between the 13th and 80th days. The active lateral condensation produced less infiltration than the single cone technique, though without statistically significant differences between them. Conclusions: It may be concluded that there was no difference in bacterial penetration between the two root canal filling techniques. The mean root canalcontamination time was 67 days.

Antimicrobial activity of chlorhexidine in root canals instrumented with the ProTaper Universal™ System

Aim: The purpose of the present study was to evaluate the antimicrobial activity of 0.2%, 1%, and2% chlorhexidine in root canals instrumented with the ProTaper Universal™ system. Methods:Fifty human mandibular premolar teeth were infected with a mixture of Candida albicans,Pseudomonas aeruginosa, Enterococcus faecalis and Staphylococcus aureus. The specimens were randomly divided into 5 groups with 10 root canals according to the irrigant used. All root canals were instrumented with the ProTaper Universal™ system. Assessment of the antimicrobial action of the irrigant was performed before, during, and after instrumentation. Data were analyzed statistically by Chi-squared test and the Fisher exact test at 5% significance level. Results: The0.2% chlorhexidine solution was ineffective against all test microorganisms. The 1% chlorhexidinesolution was effective in eliminating P. aeruginosa and C. albicans after the use of the F1 and F3instruments, respectively. The 2% chlorhexidine solution was effective at killing S. aureus, P.aeruginosa and C. albicans after the use of the S1 instrument. There were statistically significant differences (p<0.05) between the concentrations of chlorhexidine and the instruments used.Conclusions: The 0.2% chlorhexidine solution in combination with rotary instrumentation was ineffective against all test microorganisms. The 1% chlorhexidine solution was ineffective against S. aureus and E. faecalis. The 2% chlorhexidine solution was not sufficient to inactivate E.faecalis.

Qualidade do debridamento obtido pela técnica de instrumentação da lima única de NiTi em canais ovais e circulares / Suboptimal debridement quality produced by the single-file F2 protaper technique in oval-shope canals

O presente avalia a qualidade da remoção de tecido pulpar após o preparo químico-cirúrgico realizado com a técnica da lima única, descrita por Ghassan Yared. Ainda não há publicado pesquisa sobre os resultados desta técnica. Este estudo compara o percentual de tecido pulpar remanescente em canais radiculares ovais e circulares de incisivos inferiores recém-extraídos que possuíssem polpa viva e armazenados em formol a 10%. Foram comparadas duas técnicas: ProTaper Universal® e a técnica da lima única F2. Após uma rigorosa seleção, quarenta e oito dentes com polpa viva que possuíam indicação de extração, foram preparados, classificados em canais ovais e circulares, separados aleatoriamente em 4 grupos e instrumentados com as duas técnicas. O grupo controle, com 12 espécimes, não recebeu nenhum tipo de intervenção. G1 (n=12), canais ovais, instrumentados com a técnica ProTaper Universal®; G2 (n=12), canais ovais instrumentados com a técnica da lima única F2; G3 (n=12), canais circulares instrumentados com a técnica ProTaper Universal®; G4 (n=12), canais circulares instrumentados com a técnica da lima única F2. Então, seções transversais foram preparadas para avaliação histológica. A análise da quantidade de tecido pulpar remanescente foi avaliada digitalmente. A análise preliminar dos dados brutos em conjunto de todos os grupos experimentais revelou um padrão de distribuição normal por meio do uso do teste Kolmogorov-Smirnov. A análise foi realizada, e os dados brutos foram avaliados através de métodos não-paramétricos: Teste H Kruskal-Wallis. O valor percentual mínimo de tecido remanescente foi de 0% e o máximo de 37,78% entre todos os grupos. Os valores relativos a quantidade de tecido pulpar remanescente variaram entre 0 a 43.47% µm2. Os resultados do Teste H Kruskal-Wallis não revelaram diferenças entre as seções mais apicais (p > 0.05). Entretanto, foi encontrada diferença significante entre as seções ...

The present study evaluates the quality of the pulp tissue removal after chemical and surgical preparation performed with the single file technique, described by Ghassan Yared. This study compares the percentage of remaining pulp tissue in root canals, oval and circular incisors freshly extracted possessing vital pulp and stored in formaldehyde 10%. Two techniques were compared: ProTaper Universal® and the single file F2 technique. After careful selection, forty-eight teeth with vital pulp that were likely to extraction, were prepared and divided into oval and circular root canals, divided into 4 groups and instrumented with both techniques. The control group, with 12 specimens, received no intervention. G1 (n = 12), oval canals instrumented with the ProTaper Universal technique® G2 (n = 12), oval canals instrumented using the single file F2 technique, G3 (n = 12), the circular canals instrumented with ProTaper Universal®, G4 (n = 12), the circular canals instrumented with the single file F2 technique. After biomechanical preparation, cross sections were prepared for histological evaluation. The analysis of the amount of remaining pulp tissue was assessed digitally. Preliminary analysis of the raw data set of all experimental groups revealed a normal distribution pattern by using the Kolmogorov-Smirnov test. The statistical analysis was performed, and the raw data were evaluated by non-parametric methods: H Test Kruskal-Wallis. The minimum percentage was 0% and maximum of 37.78% among all groups. The images for the amount of remaining pulp tissue ranged from 0 to 43.47% µm 2. H Test Kruskal-Wallis results revealed no differences among the most apical sections (p> 0.05). However, a significant difference was found at most apical section of the middle third (p <0.05). Significant differences were also found when the circular root canals were compared with oval canals, independent of instrumentation ...

Avaliação do efeito de duas técnicas de instrumentação na zona de risco de molares inferiores curvos por microtomografia computadorizada e análise de imagens / Effect of two instrumentation techniques in the risk zone of curved molars by microcomputed tomography and image analysis

O objetivo deste estudo foi avaliar a espessura mínima radicular remanescente e o desgaste porcentual do terço cervical em raízes mesiais de molares inferiores, após a instrumentação com as técnicas ProTaper Universal e Lima única F2. Foram obtidos 100 primeiros molares inferiores com raízes completamente separadas. Desse total, foram selecionados e incluídos no estudo somente 22 que possuíam dois canais distintos na raiz mesial, comprimento entre 20 e 22 mm e grau de curvatura da raiz mesial com angulação variando entre 10° e 20°. Destes, 8 foram eliminados por possuírem uma anatomia muito discrepante, o que limitava o processamento e análise digital das imagens (PADI). Os dentes foram acessados e a patência apical foi realizada em todos os canais determinando o comprimento de trabalho. Em cada dente, cada canal mesial foi instrumentado por uma técnica diferente. As amostras foram posicionadas em um dispositivo de montagem e digitalizadas através de microtomografia computadorizada antes e depois de serem completamente instrumentadas. O volume de interesse, correspondente à região de zona de risco, com uma grande margem de tolerância, tanto em direção apical quanto em direção cervical, foi determinado por 234 fatias, totalizando um comprimento vertical de 3,5 mm, para avaliação quantitativa comparativa. Através de PADI mediu-se, de forma automática, a espessura mínima radicular nos dois canais mesiais, antes e após a instrumentação, para todas as fatias de todos os dentes. A partir destes dados foi calculado o desgaste porcentual. Após o tratamento estatístico das mais de 6500 medidas obtidas, pôde-se concluir que não existiu diferença no desgaste da zona de risco produzido pelas duas técnicas de instrumentação testadas. Em todos os casos a espessura radicular remanescente permaneceu dentro de uma margem de segurança, não havendo, portanto, nenhum caso de rasgo ou perfuração. Dessa forma, ambas as técnicas estudadas foram consideradas seguras quanto ao ...

The aim of the present study was to evaluate the minimal remaining root canal thickness and percentage of dentin removed of the cervical third of the mesial roots mandibular molars after instrumentation with the ProTaper Universal and Single File F2 Techniques. From a total of 100 teeth, only 22 were selected and included in the study by having two distinct canals in the mesial root with length between 20 and 22 mm and degree of curvature presenting angle between 10° and 20°. Eight specimens were eliminated because they have a very disparate anatomy that limited the digital processing and analysis of the images (PADI). The teeth were accessed and patency was performed in all canals determining the working length. In each tooth, each mesial canal was instrumented by a different technique. The samples were placed in a mounting device and scanned by microcomputed tomography before and after instrumentation. The corresponding volume of interest to the region of the risk zone was determined by 234 slices, with a total vertical length of 3.5 mm, for quantitative comparative evaluation with a high degree of tolerance. The PADI performed the measures automatically of the minimal thickness of root in both mesial canals, before and after instrumentation for all slices of each tooth. From these data, the percentage of dentin removed was calculated. After statistical analysis of more than 6500 measurements, it was concluded that there was no difference in the wear of the risk zone produced by the two instrumentation techniques tested. In all instrumented specimens, the root thickness remained within a security margin, thus, no case of strip perforation was ...

Assessment of canal walls after biomechanical preparation of root canals instrumented with protaper universalTM rotary system

OBJECTIVE: The aim of this study was to examine the instrumented walls of root canals prepared with the ProTaper UniversalTM rotary system. MATERIAL AND METHODS: Twenty mesiobuccal canals of human first mandibular molars were divided into 2 groups of 10 specimens each and embedded in a muffle system. The root canals were transversely sectioned 3 mm short of the apex before preparation and remounted in their molds. All root canals were prepared with ProTaper UniversalTM rotary system or with NitiflexTM files. The pre and postoperative images of the apical thirds viewed with a stereoscopic magnifier (X45) were captured digitally for further analysis. Data were analyzed statistically by Fisher's exact test and Chi-square test at 5 percent significance level. RESULTS: The differences observed between the instrumented and the noninstrumented walls were not statistically significant (p<0.05). CONCLUSIONS: The NitiflexTM files and the ProTaper UniversalTM rotary system failed to instrument all the root canal walls.

Wear promoted in the apical third of simulated canals after instrumentation with protaper universal system

OBJECTIVE: This study evaluated the wear in the apical third of simulate canals after preparation with ProTaper Universal Rotary System. MATERIAL AND METHODS: 24 sets of instruments were used in 24 simulated canals in transparent epoxy resin blocks with degree of curvature of either 20°or 40°. The canals were photographed preoperatively and after preparation of the apical stop with ProTaper F3, F4 and F5 instruments. The initial and final images were exported to Adobe Photoshop® software and superimposed to detect the root canal wall differences (in mm) between them, in two points located 1 (A) and 5 (B) mm from the point where the working length was established. Data were subjected to analysis of variance to verify the existence of interaction among the factors: canal curvature, instrument size and curve location. Significant level was set at 5 percent. RESULTS: Regardless of the location and the canal curvature, F4 and F5 instruments produced the greatest wear (p<0.05). CONCLUSIONS: There was a deviation from the original pathway towards the outside of the root curvature in both analyzed points. All instruments produced canal transportation, but the F4 and F5 instruments produced more than the other instruments, and should thus be used with care in curved canals.