Integrating multi-index determination coupled with hierarchical cluster analysis to evaluate the quality consistency of PVE30, an anti-HSV "glycoprotein" macromolecule of Prunellae Spica.

INTRODUCTION: Prunellae Spica (PS), derived from the dried fruit spikes of Prunella vulgaris L., is a traditional Chinese medicinal herb. Our previous studies found that PVE30, a water-extracting ethanol-precipitating "glycoprotein" macromolecule of PS, was a potential anti-herpes simplex virus (HSV) candidate. However, due to the complex structure and diverse bioactivity of the "glycoprotein", ensuring its quality consistency across different batches of PVE30 becomes particularly challenging. This poses a significant hurdle for new drug development based on PVE30. OBJECTIVE: Our study aimed to integrate multi-index determination coupled with hierarchical cluster analysis (HCA) to holistically profile the quality consistency of "glycoprotein" in PVE30. METHODS: High-performance gel permeation chromatography with refractive index detector (HPGPC-RID) was used to characterise the molecular weight (Mw) distribution, HPLC-PDA was used to quantitatively analyse the composed monosaccharides and amino acids, and UV-VIS was used to quantify the contents of polysaccharides and proteins. Qualitative and quantitative consistency was analysed for each single index in 16 batches of PVE30, and a 16 × 38 data matrix, coupled with HCA, was used to evaluate the holistic quality consistency of PVE30. RESULTS: The newly developed and validated methods were exclusive, linear, precise, accurate, and stable enough to quantify multi-indexes in PVE30. Single-index analysis revealed that 16 batches of PVE30 were qualitatively consistent in Mw distribution, polysaccharides and proteins, and the composition of composed monosaccharides and amino acids but quantitatively inconsistent in the relative contents of some "glycoprotein" macromolecules, as well as the composed monosaccharides/amino acids. HCA showed that the holistic quality of PVE30 was inconsistent, the inconsistency was uncorrelated with the regions where PS was commercially collected, and the contents of 17 amino acids and 2 monosaccharides contributed most to the holistic quality inconsistency. CONCLUSION: Multi-index determination coupled with HCA was successful in evaluating the quality consistency of PVE30, and the significant difference in quantitative indices was not caused by the origin of PS. The cultivating basis should be confirmed for PVE30-based new drug development.

Quality control strategies of medicine food homology materials based on fingerprint profiling and chemometrics: Citri Reticulata Pericarpium as an example.

The study aimed to provide a reliable and feasible strategy for the comprehensive quality control of medicine food homology materials (MFHM). The high performance liquid chromatography (HPLC) fingerprints and Fourier transform mid-infrared (FT-MIR) quantized fingerprints were successfully developed to comprehensively evaluate overall quality of Citri Reticulata Pericarpium (CRP) by applying comprehensive quantified fingerprint method (CQFM). All samples were well distinguished and divided into 5 grades. In addition, through principal component analysis (PCA) and partial least squares discriminant analysis (PLS-DA), the identification ability of HPLC fingerprints and FT-MIR fingerprints on CRP with different storage years was discussed. The results showed that HPLC fingerprints combined with PCA had good discrimination ability, and the PLS-DA model established by the preprocessed FT-MIR fingerprint data could accurately distinguish and predict the storage period of CRP. Finally, based on 1, 1-diphenyl-2-picrylhydrazyl radical (DPPH•) scavenging assay, combined with bivariate correlation analysis, the fingerprint-activity relationship of offline antioxidant activity of CRP samples with the fingerprints peak were studied. In general, the comprehensive strategies provide a reliable and scientific reference scheme for the quality control of MFHM in the future.

Comprehensive quality consistency evaluation strategy and analysis of compound danshen tablet.

The compositions of traditional Chinese medicines are extremely complex,as a result, exploring consistent quality is demanded and challenging. Quality consistency of products obtained from the same manufacturer has received little attention. The strategy of quality consistency evaluation (QCE) has been proposed as a novel method for quality control of Traditional Chinese Medicine Patent Prescription (TCMPP). This study aimed to establish a comprehensive QCE strategy for Compound Danshen Tablet (CDT). High Performance Liquid Chromatography-Diode Array Detector and Gas Chromatography-Mass Spectrometry were separately applied to determinate the content of seven and two index components, which representing the quality actuality of different raw medicines. The dissolution test was designed to obtain the dissolution ratios of CDT samples. QCE can provide the intra-batch content consistency difference (PA), inter-batch content consistency difference (PB), and dissolution ratio consistency difference (PR) values. The consistency of CDT samples from 15 different manufacturers (75 batches) was evaluated by principal component analysis (PCA), which showed that the total content (nine index components) of the 75 batches of samples obtained from 15 manufacturers ranged from 22.11 to 38.45 mg·tablet-1. The dissolution ratios ranged from 74.8% to 116.4%. The PA values of 15 manufacturers ranged from 2.4% to 12.2%, and the PB (11.1-45.1%) values were higher than the PA values. The PR values reflecting the various dissolution ratios in vitro ranged from 8.1% to 57.5%. The three consistency factors were ranked by PCA, and products of the 15 manufacturers were classified into three categories. The PA, PB, and PR values provided a comprehensive and effective approach for monitoring the quality consistency of CDT and can serve as an example of QCE for other TCMPP.

Quality consistency evaluation of commercial Impatiens Caulis by integrating UPLC-QTOF-MS/MS chemical profiling and UPLC-DAD multi-components quantification approaches.

In this study, ultra-high performance liquid chromatography coupled with quadrupole time-of-flight mass spectrometry (UPLC-QTOF-MS/MS) and ultra-high performance liquid chromatography coupled with photo-diode array spectrometry (UPLC-DAD) were firstly integrated to qualitatively characterize the chemical profiles and quantitatively determine the major components in Impatiens Caulis (IC), a Chinese medicinal herb derived from the dried stem of Impatiens balsamina. The qualitative analysis revealed that there was no difference in chemical profiles of twenty commercial IC samples. A total of 45 components were characterized, there in 5 naphthoquinones, 3 coumarins, 5 phenolic acids, 12 flavonoids and 3 other compounds were identified definitely. However, the quantitative results showed a significant difference in these IC samples. In particular, the highest content of total quantified compounds was even 9.49 times of the lowest one. Furthermore, the average contents of these quantified compounds in twenty commercial IC samples had high values of relative standard deviation (RSD) ranged from 15.64% to 98.76%, suggesting a poor quality consistency in these commercial IC samples. Therefore, efficacy related chemical markers as well as the cultivation region, harvest time and/or post-harvest handling of IC should be further investigated for ensuring its quality and efficacy consistency.

Views on Key Technical Problems in Research and Development of Famous Classical Formulas / 中国实验方剂学杂志

In this paper， the key technical problems in the research and development of famous classical formulas are analyzed. Firstly， the puzzled problem for a long-time， which is conversion relationship from medicinal metrology of Han dynasty （HD） to that of modern （gram，g）， is comprehensively expounded that one Liang （两） of HD=3 g is more appropriate. Secondly， the model and principles of quality consistency evaluation are given for the transformation from the quality of authoritative basic sample prepared by casserole （ABS-C） to the quality consistency in Laboratory process， pilot-scale process and industrial production. The consistency evaluation model is ξABS-X=K1（Q1ABS-X/Q1ABS-C）+K2（Q2ABS-X/Q2ABS-C）+……+Ki（QiABS-X/QiABS-C）=∑Ki（QiABS-X/QiABS-C）（i=1，2，3……n）. In the formula， ABS-X means laboratory reference sample ABS-C （ABS-L）， pilot-scale ABS-C （ABS-mP） or industrial production ABS-C （ABS-P）， ξABS-X means the quality consistency rate or similarity degree of ABS-L， ABS-mP and ABS-P processes with ABS-C， Ki means the weight of each quality evaluation index （i）， QiABS-X is the data of i in ABS-L， ABS-mP， ABS-P samples， and QiABS-C is the data （or mean） of i in ABS-C sample. Thirdly， in order to control the quality of the herbal medicines whose active ingredients were unknown， their chemical constituents should be studied deeply， and if necessary， the bioassay research should be carried out according to the main efficacy or indication of famous classical formulas. Finally， for the special processing of some herbal medicines， it is difficult to formulate the processing method， technology and standard of prepared slices. It is suggested that the scientific connotation and historical evolution of the special processing method should be thoroughly sorted out， and its technological characteristics are summarized， the modern processing technology and production processes are simulated， and then the corresponding processing methods and quality standards are formulated.

Establishment and validation of the quantitative analysis of multi-components by single marker for the quality control of Qishen Yiqi dripping pills by high-performance liquid chromatography with charged aerosol detection.

INTRODUCTION: Charged aerosol detection (CAD) has the merits of high sensitivity, high universality and response uniformity. The strategy that combines the quantitative analysis of multi-components by single marker (QAMS) with CAD has certain advantages for the quantification of multi-components. However, relevant research was limited. OBJECTIVES: To comprehensively investigate the crucial factors that affect the performance of the HPLC-CAD-QAMS approach and validate the credibility and feasibility of the method. METHODOLOGY: Multiple components of Qishen Yiqi dripping pills (QSYQ) were assayed using the high-performance liquid chromatography (HPLC)-CAD-QAMS approach. Some factors that affect the sensitivity and accuracy of the approach were sufficiently studied. After the method verification, principal component analysis (PCA) was applied to evaluate the quality consistency of three types of samples: normal samples, expired samples and negative samples. RESULTS: A HPLC-CAD-QAMS method was successfully developed for the multi-component determination of QSYQ. First, chromatographic conditions were optimised by a definitive screening design, and the optimised ranges of operating parameters were obtained with a Monte Carlo simulation method. Next, a new method to select the internal reference standards was successfully introduced based on the heatmap of Pearson correlation coefficients of the response factors. Then, the multi-point method was selected to calculate the relative correction factors, and a robustness test was conducted with Plackett-Burman design. Finally, the PCA was proved to be effective for the quality consistency evaluation of different samples. CONCLUSION: The developed HPLC-CAD-QAMS method can be a reliable and superior means for the multi-component quantitative analysis of QSYQ.

Quality consistency evaluation of commercial transfer factor injections by chromatographic fingerprint combined with multivariate statistical analysis.

The current quality control methods relying mainly on chromogenic reaction can hardly ensure the quality and safety of the biochemical drug with complex chemical composition. Therefore, a chromatographic fingerprint method was developed for the quality evaluation of a multicomponent biochemical drug, transfer factor injection. High-performance liquid chromatography fingerprint was measured by using a C18 column (250 × 4.6 mm, 5 µm) with a mobile phase composed of 0.1% trifluoroacetic acid-water and 0.085% trifluoroacetic acid-acetonitrile under gradient elution. The developed method was validated and was subsequently applied to 57 batches of commercial products which were sampled by National Drug Assessment Program. High-resolution mass spectrometry analysis was performed on characteristic peaks of fingerprints, and a series of amino acids, nucleosides, and deoxynucleosides were identified. In the fingerprint assessments, principal component analysis and Hotelling T2 analysis yielded the best results. The results generally indicated that there was a significant difference among products of batch-to-batch or from different manufacturers. Abnormal samples and its discriminatory components were also explored. In summary, the established fingerprinting method with multivariate statistical analysis could offer an efficient, reliable, and practical approach for quality consistency evaluation of transfer factor injection, providing a reference for the quality control of other multicomponent biochemical drugs.

Quality consistency evaluation on four origins of Cicadae Periostracum by ultra-performance liquid chromatography coupled with quadrupole/time-of-flight mass spectrometry analysis.

Cicadae Periostracum, which is derived from the slough of Cicadidae insects, is a commonly used crude drug in traditional Chinese medicine (TCM). As specified in Chinese Pharmacopoeia, Cryptotympana atrata (CA) is the only official species of this crude drug. However, the slough of other three species, i.e., Auritibicen flammatus (AF), Cryptotympana mandrina (CM) and Platypleura kaempferi (PK), have been also used as the origins of Cicadae Periostracum in Chinese herbal market, although whether the quality of these four origins is consistent or not is still unknown. In present study, ultra-high performance liquid chromatography coupled with quadrupole time-of-flight mass spectrometry (UPLC-QTOF-MS/MS) was employed to qualitatively and quantitatively compare the chemical profiles of the four origins. Totally, 34 N-acetyldopamine polymers were identified from the four origins, including 4 N-acetyldopamine dimers, 11 N-acetyldopamine trimers, 10 N-acetyldopamine tetramers, and 9 N-acetyldopamine pentamers. AF, CM and PK had similar chemical profiles with that of CA. The contents and compositional ratio of the four types of polymers in CA, AF and CM were consistent with each other, but significantly lower or different in PK. All these results suggested that AF and CM might be considered as the potential resources of Cicadae Periostracum concerning their consistent holistic quality, whereas whether PK could be used as potential origin of Cicadae Periostracum or not need further evaluation for their different compositional ratios and contents of the four types of N-acetyldopamine polymers. This is the first study on chemical profiling and comparison of N-acetyldopamine polymers in four origins of Cicadae Periostracum, which is beneficial for potential resources utilization and quality standard improvement of Cicadae Periostracum.

Integrating chemical similarity and bioequivalence: A pilot study on quality consistency evaluation of dispensing granule and traditional decoction of Scutellariae Radix by a totality-of-the-evidence approach.

There is an increasing focus on the quality consistency evaluation of dispensing granule in traditional Chinese medicines (TCMs). According to the guideline from Chinese Pharmacopoeia Commission, the substantial equivalence of dispensing granule and traditional decoction should be determined, and the chromatographic fingerprint has been recommended as a comprehensive qualitative approach to assess the quality consistency between dispensing granule and traditional decoction. However, a high-degree chemical similarity does not equal a bioequivalence. Attempting to realize the quality evaluation by integrating chemical consistency and bioequivalence, we herein proposed a totality-of-the-evidence approach based on clustering analysis and equivalence evaluation taking the dispensing granule and traditional decoction of Scutellariae Radix (SR) as a typical case. Chemical fingerprints were developed by high performance liquid chromatography coupled with photodiode array detector and quadrupole time-of-flight mass spectrometry (HPLC-PDA/QTOF-MS). Subsequently, a feature selection strategy, integrated linear and nonlinear correlation analysis, was carried out to assess the correlation between chemical profiles and biological activities. Finally, quality consistency between the dispensing granule and the traditional decoction was determined by bioactive marker-guided hierarchical clustering analysis (HCA), k-means clustering method and bioequivalence evaluation. The available evidence suggested that not all the dispensing granule of SR were sufficiently similar to the traditional decoction. This study provides an applicable methodology for quality consistency evaluation of dispensing granule and traditional decoction in TCMs.

Evaluation of the Process Control Capability of Lorazepam Tablets by Near-Infrared Spectroscopy / 中国药学杂志

OBJECTIVE: To evaluate the process control capability of lorazepam tablets produced in China. METHODS: Near-infrared spectroscopy combined with cluster analysis(CLA) and principal component analysis(PCA) were used to characterize the different processes and process control space of lorazepam tablets produced in China. Universal quantitative model was built to obtain the content predictions of individual units(tablets), on base of which process mean value,intra-batch and inter-batch differences and distribution status were calculated by univariate statistics analysis methods. RESULTS: Three different manufacturing processes of lorazepam tablets were characterized by both CLA and PCA. The process control spaces reconstructed by the second and third principal components indicated that the process of manufacturer B had smaller variation than that of manufacturer A. The universal quantitative model had a principal component number of 5, r2 square value of 93.89% and bias of -0.008 56. The statistic distribution of API contents showed that 9 batches out of the total 27 batches had relative lager intra-batch differences and manufacturer B had better inter-batch differences than manufacturer A. CONCLUSION: The method this study established can reveal the control levels of different processes of lorazepam tablets, which provide an efficient quality consistency evaluation means for generic drug consistency assessment.

Novel strategy for quality consistency evaluation of Chinese medicine "YIQING" tablet that combines the simultaneous quantification and screening of ten bioactive constituents.

The UV characteristics for different categories compounds in complex traditional Chinese medicines and herbal preparations usually vary. Thus, to achieve the integral analysis of multiwavelength fingerprint characteristics, we introduced a novel strategy of multiwavelength total fusion profiling. The simultaneous separation and quantification of multiple components by reversed-phase high-performance liquid chromatography coupled with diode array detection was developed in an effective, accurate, and reliable way. Furthermore, a 2,2-diphenyl-1-picrylhydrazyl radical (DPPH) scavenging assay was set up to detect and screen the bioactivity of similar-structure constituents (aloe-emodin, rhein, emodin, chrysophanol, baicalein, wogonin, baicalin, wogonoside, berberine hydrochloride, and jatrorrhizine hydrochloride). Moreover, the high-performance liquid chromatography DPPH assay was developed to monitor the relationship between the biological activity and the spatial structure, the number of hydroxyl groups, the concentration of the analytes in samples. The result of qualitative classification for 15 batches of "YIQING" tablets using principle component analysis was consistent with the quantitative fingerprint assessment using the average linear quantitative fingerprint method. Therefore, chemometrics, multiwavelength total fusion profiling in conjunction with average linear quantitative fingerprint method and antioxidant activity can control the quality of traditional Chinese medicines/herbal preparations comprehensively and practically.

In vitro Dissolution and Virtual Bioequivalence of Domestic Nifedipine Sustained Release Tablets / 中国药师

Objective: To evaluate the quality consistency of four domestic nifedipine sustained release tablets by dissolution test and virtual bioequivalence study by GastroPlus software.Methods: The dissolution curves of the four preparations were determined with the methods described in Japanese orange book and Chinese Pharmacopeia.The f2 factor of dissolution curves was calculated to compare the similarity.The in vitro dissolution data of the original preparation were combined with GastroPlus software to obtain the simulated in vivo absorption curves which were correlated with the actual concentration-time curves.The suitable dissolution medium was selected to evaluate the quality of domestic nifedipine sustained release tablets according to the better in vivo-in vitro correlation (IVIVC).The simulated in vivo absorption parameters obtained from the dissolution data combined with GastroPlus software were used to conduct the virtual bioequivalence study of domestic nifedipine sustained release tablets compared with the original products.Results: The f2 similar factors of the four domestic nifedipine sustained release tablets compared with the original preparation were all less than 50.Compared with that from the method in Japanese orange book, the correlation between the dissolution profiles in vitro and in vivo of original nifedipine sustained release tablets obtained from the method in Chinese Pharmacopoeia was better.The deviation between the simulated Cmax and AUC0-∞ values of the four test tablets and the measured values of the original preparation was within the range of ±20%.Conclusion: The dissolution curves of the four domestic nifedipine sustained release tablets are not similar to that of the original preparation, however, the four preparations are all bioequivalent to the original preparation according to the simulated absorption parameters based on the dissolution method in Chinese Pharmacopeia and GastroPlus software.

Establishment of dissolution curves test method of Ribavirin capsules and investigation with domestic ribavirin capsules of dissolution behavior / 中国生化药物杂志

Objective To establish the dissolution curves test method of Ribavirin capsules, and investigate dissolution behavior of domestic Ribavirin capsules.To provide experimental basis for generic drugs quality consistency evaluation.Methods According to the first dissolution method (basket method)stated in appendix Ⅹof Chinese Pharmacopeia(2010 edition),the rotation speed was 50 r/min with dissolution medium volume of 900 mL.The dissolution profiles of Ribavirin capsules in four different mediums( pH 1.2 hydrochloric acid solution,pH 4.5 acetic buffer,pH 6.8 phosphate buffer and water) were determined by HPLC.The determination was performed on C18 column with mobile phase consisted of 4 g/L sodium dihydrogen phosphate solution(pH adjusted to 5.0 ±0.05 using 5% sodium hydroxide solution)-acetonitrile(98:2)at the flow rate of 1.0 mL/min.The detection wavelength was 225 nm,and sample size was 10μL.Results The linear range of ribavirin was 2.5-200μg/mL(r=1).RSD of precision and stability tests were lower than 0.5%.The average recoveries were 101.3%, 100.7%, 100.2%, 100.4% in four mediums.Dissolution behavior of capsules can be more consistent and rapid dissolution in pH4.5 and pH6.8 mediums.But they were quite different in pH1.2 and water mediums, and some of their average dissolution at 15 min could not reach 85%.Conclusion This method is accurate and reliable.There is a difference between domestic Ribavirin capsules dissolution behavior, and the formulation processes have room for improvement.