Reproductive & Developmental Toxicity of quaternary ammonium compounds.

Quaternary ammonium compounds (QACs) are a class of chemicals commonly used as disinfectants in household and healthcare settings. Their usage has significantly increased in recent years due to the COVID-19 pandemic. In addition, QACs have replaced the recently banned disinfectants triclosan and triclocarban in consumer products. QACs are found in daily antimicrobial and personal care products such as household disinfectants, mouthwash, and hair care products. Due to the pervasiveness of QACs in daily use products, humans are constantly exposed. However, little is known about the health effects of everyday QAC exposure, particularly effects on human reproduction and development. Studies that investigate the harmful effects of QACs on reproduction are largely limited to high-dose studies, which may not be predictive of low dose, daily exposure, especially as QACs may be endocrine disrupting chemicals. This review analyzes recent studies on QAC effects on reproductive health, identifying knowledge gaps, and recommending future directions in QAC-related research.

A Label-Free Optical Flow Cytometry Based-Method for Rapid Assay of Disinfectants' Bactericidal Activity.

Selecting the appropriate disinfectant to control and prevent healthcare-associated infections (HAIs) is a challenging task for environmental health experts due to the large number of available disinfectant products. This study aimed to develop a label-free flow cytometry (FCM) method for the rapid evaluation of bactericidal activity and to compare its efficacy with that of standard qualitative/quantitative suspension tests. The bactericidal efficiency of eight commercial disinfectants containing quaternary ammonium compounds (QACs) was evaluated against four strains recommended by EN 13727 (Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus, Enterococcus hirae) and four multidrug-resistant pathogens. The proposed FCM protocol measures changes in scattered light and counts following disinfectant exposure, neutralization, and culture steps. Unlike other available FCM-based methods, this approach does not rely on autofluorescence measurements, impedance cytometry, or fluorescent dyes. The FCM scattered light signals revealed both decreased count rates and morphological changes after treatment with minimum inhibitory concentrations (MICs) and higher concentrations for all tested bacteria. The results from the FCM measurements showed excellent correlation with those from standard assays, providing a rapid tool for monitoring the susceptibility profile of clinical, multidrug-resistant pathogens to chemical disinfectants, which could support infection prevention and control procedures for healthcare environments. This label-free FCM protocol offers a novel and rapid tool for environmental health experts, aiding in the optimization of disinfectant selection for the prevention and control of HAIs.

Self-Cleaning Antibacterial Composite Coating of Fluorinated Acrylic Resin and Ag/SiO2 Nanoparticles with Quaternary Ammonium.

With improvements in living standards, the demand for antibacterial self-cleaning coatings has significantly increased. In this work, self-cleaning coatings with antibacterial properties were fabricated by spray-coating a composite of fluorinated acrylic resin and Ag/SiO2 nanoparticles with quaternary ammonium salts. The synergistic action of the quaternary ammonium salts and silver nanostructures caused the coating to show a dual antibacterial effect. The Ag/SiO2 nanoparticles roughened the coating's surface and, in combination with the fluorinated chains, provided the surface a superhydrophobic self-cleaning property with a contact angle of 156° and a sliding angle of less than 2°. Notably, the composite coating withstood 100 abrasion cycles without losing its superhydrophobicity and the contact angle is still exceeded 150° after 60 h of immersion solutions with different pH values, demonstrating outstanding wear resistance and acid/alkali stability. The incorporation of nanostructured antibacterial agents was effective in improving the roughness and antibacterial properties of the low-surface-energy resin, resulting in a self-cleaning antibacterial composite coating. This method may pave a new route for the design of functional coating materials with excellent overall performance.

Current insights into the effects of cationic biocides exposure on Enterococcus spp.

Cationic biocides (CBs), such as quaternary ammonium compounds and biguanides, are critical for controlling the spread of bacterial pathogens like Enterococcus spp., a leading cause of multidrug-resistant healthcare-associated infections. The widespread use of CBs in recent decades has prompted concerns about the potential emergence of Enterococcus spp. populations exhibiting resistance to both biocides and antibiotics. Such concerns arise from their frequent exposure to subinhibitory concentrations of CBs in clinical, food chain and diverse environmental settings. This comprehensive narrative review aimed to explore the complexity of the Enterococcus' response to CBs and of their possible evolution toward resistance. To that end, CBs' activity against diverse Enterococcus spp. collections, the prevalence and roles of genes associated with decreased susceptibility to CBs, and the potential for co- and cross-resistance between CBs and antibiotics are reviewed. Significant methodological and knowledge gaps are identified, highlighting areas that future studies should address to enhance our comprehension of the impact of exposure to CBs on Enterococcus spp. populations' epidemiology. This knowledge is essential for developing effective One Health strategies that ensure the continued efficacy of these critical agents in safeguarding Public Health.

Comparative metabolomics reveals how the severity of predation by the invasive insect Cydalima perspectalis modulates the metabolism re-orchestration of native Buxus sempervirens.

The recent biological invasion of box tree moth Cydalima perspectalis on Buxus trees has a major impact on European boxwood stands through severe defoliation. This can hinder further regrowth and threaten survival of populations. In a mesocosm approach and controlled larval density over a 2-month period, responses of B. sempervirens essential and specialized metabolites were characterized using metabolomics, combining 1H-NMR and LC-MS/MS approaches. This is the first metabolome depiction of major Buxus responses to boxwood moth invasion. Under severe predation, remaining green leaves accumulate free amino acids (with the noticeable exception of proline). The leaf trans-4-hydroxystachydrine and stachydrine reached 10-13% and 2-3% (DW), while root content was lower but also modulated by predation level. Larval predation promoted triterpenoid and (steroidal) alkaloid synthesis and diversification, while flavonoids did not seem to have a relevant role in Buxus resistance. Our results reveal the concomitant responses of central and specialized metabolism, in relation to severity of predation. They also confirm the potential of metabolic profiling using 1H-NMR and LC-MS to detect re-orchestration of metabolism of native boxwood after severe herbivorous predation by the invasive box-tree moth, and thus their relevance for plant-insect relationships and ecometabolomics.

Synthesis and antimicrobial activity testing of quaternary ammonium silane compounds.

With increasing health awareness of the pathogenic effects of disease-causing microorganisms, interest in and use (of medical textiles, disinfectants in medical devices, etc.) of antimicrobial substances have increased in various applications, such as medical textiles and disinfectants (alcohol-based and nonalcoholic), in medical devices There are several concerns with alcohol-based disinfectants, such as surface deformation of medical devices due to high alcohol content and damage to skin tissue caused by lipid and protein denaturation of cell membranes. Quaternary ammonium compounds (quats) were preferred because they have the potential to prepare water-based disinfectants. In this study, novel (3-chloropropyl)triethoxysilane (CPTMO) and (3-chloropropyl)triethoxysilane (CPTEO) based quaternary ammonium silane compounds (silane-quats) were developed using quats with carbon chain lengths of C12, C14, C16 and C18. Titration (ASTM D2074) was used to calculate the yield of the synthesis and the structures of the products were characterised by Fourier transform infrared spectroscopy (FTIR), nuclear magnetic resonance spectroscopy (13C NMR, 1H NMR) and gas chromatography-mass spectrometry (GC-MS).The in vitro antimicrobial activity of the synthesized samples was evaluated against Gram-positive (Staphylococcus aureus (S. aureus), Enterococcus hirae (E. hirae)) and Gram-negative (Escherichia coli (E. coli), Pseudomonas aeruginosa (P. aeruginosa)) bacteria and fungi (Candida albicans (C. albicans), Aspergillus brasiliensis (A. brasiliensis)) using the minimum inhibitory concentration (MIC) test. According to MIC tests, the silane-quats with the highest antimicrobial effects were dimethylhexadecyl[3-(trimethoxysilyl)propyl]ammonium chloride (SQ3), which had an MIC of < 16 µg/ml (ppm) against E. coli, S. aureus, E. hirae, C. albicans, and A. brasiliensis and 32 µg/ml against P. aeruginosa. The MIC test results also showed antimicrobial activity at least 2 times greater than that of the commercially available disinfectant benzalkonium chloride (BAC). Findings suggest that SQ3 (C16) holds promise as an effective medical disinfectant, presenting a novel approach to combating microbial infections in healthcare settings.

Rapid identification of reproductive toxicants among environmental chemicals using an in vivo evaluation of gametogenesis in budding yeast Saccharomyces cerevisiae.

Infertility affects ∼12 % of couples, with environmental chemical exposure as a potential contributor. Of the chemicals that are actively manufactured, very few are assessed for reproductive health effects. Rodents are commonly used to evaluate reproductive effects, which is both costly and time consuming. Thus, there is a pressing need for rapid methods to test a broader range of chemicals. Here, we developed a strategy to evaluate large numbers of chemicals for reproductive toxicity via a yeast, S. cerevisiae high-throughput assay to assess gametogenesis as a potential new approach method (NAM). By simultaneously assessing chemicals for growth effects, we can distinguish if a chemical affects gametogenesis only, proliferative growth only or both. We identified a well-known mammalian reproductive toxicant, bisphenol A (BPA) and ranked 19 BPA analogs for reproductive harm. By testing mixtures of BPA and its analogs, we found that BPE and 17 ß-estradiol each together with BPA showed synergistic effects that worsened reproductive outcome. We examined an additional 179 environmental chemicals including phthalates, pesticides, quaternary ammonium compounds and per- and polyfluoroalkyl substances and found 57 with reproductive effects. Many of the chemicals were found to be strong reproductive toxicants that have yet to be tested in mammals. Chemicals having affect before meiosis I division vs. meiosis II division were identified for 16 gametogenesis-specific chemicals. Finally, we demonstrate that in general yeast reproductive toxicity correlates well with published reproductive toxicity in mammals illustrating the promise of this NAM to quickly assess chemicals to prioritize the evaluation for human reproductive harm.

Broad-Spectrum Supramolecularly Reloadable Antimicrobial Coatings.

Antimicrobial surfaces limit the spread of infectious diseases. To date, there is no antimicrobial coating that has widespread use because of short-lived and limited spectrum efficacy, poor resistance to organic material, and/or cost. Here, we present a paint based on waterborne latex particles that is supramolecularly associated with quaternary ammonium compounds (QACs). The optimal supramolecular pairing was first determined by immobilizing selected ions on self-assembled monolayers exposing different groups. The QAC surface loading density was then increased by using polymer brushes. These concepts were adopted to develop inexpensive paints to be applied on many different surfaces. The paint could be employed for healthcare and food production applications. Its slow release of QAC allows for long-lasting antimicrobial action, even in the presence of organic material. Its efficacy lasts for more than 90 washes, and importantly, once lost, it can readily be restored by spraying an aqueous solution of the QAC. We mainly tested cetyltrimethylammonium as QAC as it is already used in consumer care products. Our antimicrobial paint is broad spectrum as it showed excellent antimicrobial efficiency against four bacteria and four viruses.

Facile Synthesis of Dual-Functional Cross-Linked Membranes with Contact-Killing Antimicrobial Properties and Humidity-Response.

Poly(2-hydroxyethylmethacrylate-co-2-(dimethylamino)ethyl methacrylate), P(HEMA-co-DMAEMAx), copolymers were quaternized through the reaction of a part of (dimethylamino)ethyl moieties of DMAEMA units with 1-bromohexadecane. Antimicrobial coatings were further prepared through the cross-linking reaction between the remaining DMAEMA units of these copolymers and the epoxide ring of poly(N,N-dimethylacrylamide-co-glycidyl methacrylate), P(DMAm-co-GMAx), copolymers. The combination of P(HEMA-co-DMAEMAx)/P(DMAm-co-GMAx) copolymers not only enabled control over quaternization and cross-linking for coating stabilization but also allowed the optimization of the processing routes towards a more facile cost-effective methodology and the use of environmentally friendly solvents like ethanol. Careful consideration was given to achieve the right content of quaternized units, qDMAEMA, to ensure antimicrobial efficacy through an appropriate amphiphilic balance and sufficient free DMAEMA groups to react with GMA for coating stabilization. Optimal synthesis conditions were achieved by membranes consisting of cross-linked P(HEMA78-co-DMAEMA9-co-qDMAEMA13)/P(DMAm-co-GMA42) membranes. The obtained membranes were multifunctional as they were self-standing and antimicrobial, while they demonstrated a distinct fast response to changes in humidity levels, widening the opportunities for the construction of "smart" antimicrobial actuators, such as non-contact antimicrobial switches.

Antibacterial Agents for Composite Resin Restorative Materials: Current Knowledge and Future Prospects.

Resin composites became the material of choice for direct restorations in anterior and posterior teeth. Despite the revolutionary improvement in the material, restoration failure is still a major drawback due to the material's inherent negative properties, including a lack of antibacterial effects. Therefore, many attempts have been made to incorporate antibacterial agents into resin composite materials to improve their antimicrobial properties and prevent secondary caries formation. Multiple laboratory studies have been conducted using different antibacterial agents, such as quaternary ammonium compounds, methacryloyloxydodecylpyridinium bromide, magnesium oxide nanoparticles, chlorhexidine, and chitosan. This review provides a glance at the current status of these materials and the research directions needed in the future.

Quantification of quaternary ammonium compounds by liquid chromatography-mass spectrometry: Minimizing losses from the field to the laboratory.

Quaternary Ammonium Compounds (QACs) are widely used in household, medical and industrial settings. As a consequence, they are ubiquitously found in the environment. Although significant efforts have been put into the development of sensitive and reproducible analytical methods, much less effort has been dedicated to the monitoring of QACs upon sample storage and sample preparation. Here we studied the effect of storage, concentration, and extraction procedures on the concentrations of QACs in samples. Thirteen QACs selected amongst benzalkonium compounds (BACs), dialkyldimethylammonium compounds (DADMACs) and alkyltrimethylammonium compounds (ATMACs) were quantified in aqueous and solid samples using LC-MS/MS. Most QACs adsorbed on container walls could be recovered using a short washing step with MeOH containing 2 % v/v formic acid. Concentrations of QACs from aqueous solutions using solid phase extraction (SPE) with Strata-X cartridges and elution with acidified MeOH utilized to wash the emptied containers gave highly satisfactory recoveries (101-111 %). Good recoveries (89-116 %) were also obtained when extracting a spiked organic-rich synthetic soil using accelerated solvent extraction (ASE) with acidified MeOH at low solid/solvent ratio (0.4 g/20 mL). Applying the recommended methodologies to real samples collected from a Canadian wastewater treatment plant (WWTP) gave QAC concentrations in the ranges of 0.01-30 µg/L, < 1.2 µg/L, and 0.05-27 mg/kg for the influent, effluent and biosolids samples, respectively.

Development and Application of a Multidimensional Database for the Detection of Quaternary Ammonium Compounds and Their Phase I Hepatic Metabolites in Humans.

The COVID-19 pandemic has led to significantly increased human exposure to the widely used disinfectants quaternary ammonium compounds (QACs). Xenobiotic metabolism serves a critical role in the clearance of environmental molecules, yet limited data are available on the routes of QAC metabolism or metabolite levels in humans. To address this gap and to advance QAC biomonitoring capabilities, we analyzed 19 commonly used QACs and their phase I metabolites by liquid chromatography-ion mobility-tandem mass spectrometry (LC-IM-MS/MS). In vitro generation of QAC metabolites by human liver microsomes produced a series of oxidized metabolites, with metabolism generally occurring on the alkyl chain group, as supported by MS/MS fragmentation. Discernible trends were observed in the gas-phase IM behavior of QAC metabolites, which, despite their increased mass, displayed smaller collision cross-section (CCS) values than those of their respective parent compounds. We then constructed a multidimensional reference SQLite database consisting of m/z, CCS, retention time (rt), and MS/MS spectra for 19 parent QACs and 81 QAC metabolites. Using this database, we confidently identified 13 parent QACs and 35 metabolites in de-identified human fecal samples. This is the first study to integrate in vitro metabolite biosynthesis with LC-IM-MS/MS for the simultaneous monitoring of parent QACs and their metabolites in humans.

Polypropylene-Rendered Antiviral by Three-Dimensionally Surface-Grafted Poly(N-benzyl-4-vinylpyridinium bromide).

To inhibit viral infection, it is necessary for the surface of polypropylene (PP), a polymer of significant industrial relevance, to possess biocidal properties. However, due to its low surface energy, PP weakly interacts with other organic molecules. The biocidal effects of quaternary ammonium compounds (QACs) have inspired the development of nonwoven PP fibers with surface-bound quaternary ammonium (QA). Despite this advancement, there is limited knowledge regarding the durability of these coatings against scratching and abrasion. It is hypothesized that the durability could be improved if the thickness of the coating layer were controlled and increased. We herein functionalized PP with three-dimensionally surface-grafted poly(N-benzyl-4-vinylpyridinium bromide) (PBVP) by a simple and rapid method involving graft polymerization and benzylation and examined the influence of different factors on the antiviral effect of the resulting plastic by using a plaque assay. The thickness of the PBVP coating, surface roughness, and amount of QACs, which jointly determine biocidal activity, could be controlled by adjusting the duration and intensity of the ultraviolet irradiation used for grafting. The best-performing sample reduced the viral infection titer of an enveloped model virus (bacteriophage ϕ6) by approximately 5 orders of magnitude after 60 min of contact and retained its antiviral activity after surface polishing-simulated scratching and abrasion, which indicated the localization of QACs across the coating interior. Our method may expand the scope of application to resin plates as well as fibers of PP. Given that the developed approach is not limited to PP and may be applied to other low-surface-energy olefinic polymers such as polyethylene and polybutene, our work paves the way for the fabrication of a wide range of biocidal surfaces for use in diverse environments, helping to prevent viral infection.

Development of Antibacterial Resin Composites Incorporating Poly(METAC) Clusters.

This study examined the antibacterial effects and physical properties of a novel resin composite incorporating poly[{2-(methacryloyloxy)ethyl}trimethylammonium chloride] (poly(METAC)), a methacrylate cationic polymer comprising quaternary ammonium compounds (QACs). Resin composites incorporating poly(METAC) were fabricated by adding 6 wt.% METAC aqueous solution to a commercially available resin composite. The FE-SEM/EDS and Raman spec-troscopy analyses showed that METAC was assembled and polymerized in the resin composites after curing. The antibacterial effect was evaluated by inoculating Streptococcus mutans or Strepto-coccus sobrinus suspensions on the surface of cured resin composites, and the experimental resin composites incorporating poly(METAC) clusters exhibited bactericidal effects even after 28 days of ageing. The physical properties of the experimental resin composites were within the ISO-stipulated ranges. Newly fabricated resin composites containing the QAC-based poly(METAC) cluster ex-hibited long-term bactericidal effects against oral bacteria on their surfaces and demonstrated ac-ceptable physical properties for clinical use.

Benzalkonium Chloride Poisoning in Pediatric Patients: Report of Case with a Severe Clinical Course and Literature Review.

The use of disinfectants, particularly those containing quaternary ammonium compounds (QUACs), has dramatically escalated globally since the coronavirus disease 2019 pandemic. We report a case that highlights the risks associated with ingesting low-concentration QUAC solutions and emphasize the importance of effective management in resolving severe lesions without sequelae. A 17-month-old boy experienced severe respiratory failure after ingesting a disinfectant containing benzalkonium chloride (BAC). The child was initially treated at a local emergency department and was subsequently transferred to a pediatric poison center. Upon evaluation, the child was found to have grade III-A corrosive esophageal lesions and chemical pneumonitis. Several complications, including massive pneumothorax and candidemia, occurred during the clinical course of the disease. However, with timely medical intervention and appropriate supportive care, the patient completely recovered without any long-term sequelae. The properties of BAC and the comprehensive management approach may have been responsible for the patient's full recovery, despite the potentially life-threatening effects of ingesting disinfectants.

An exposure assessment of 27 quaternary ammonium compounds in pet dogs and cats from New York State, USA.

Benzylalkyldimethylammonium (BACs), dialkyldimethylammonium (DDACs), and alkyltrimethylammonium compounds (ATMACs) are quaternary ammonium compounds (QACs) used widely as biocides, disinfectants, and sanitizers. Owing to their toxicity, human exposure to this class of chemicals is a concern. Pet animals are sentinels of human exposure to several indoor environmental chemicals. For the first time, we measured 7 BACs, 6 DDACs, 6 ATMACs, and 8 metabolites of BACs in urine and feces of pet dogs and cats from New York State, USA. We found widespread occurrence of QACs in feces, with median concentration of ∑All (sum concentration of all 27 QAC analytes) at 9680 and 1260 ng/g dry weight (dw) in dog and cat feces, respectively. BACs were the most abundant compounds among the four types of QACs, accounting for 64 % and 57 % of ∑All in dog and cat feces, respectively, followed by DDACs (33 % and 34 %, respectively), ATMACs (4 % and 9 %, respectively), and BAC metabolites (0.2 % and 0.3 %, respectively). However, in urine, only ω-carboxylic acid metabolites of BACs were found at median concentrations at 2.08 and 0.28 ng/mL in dogs and cats, respectively. Samples collected from animal shelters contained elevated levels of QACs than those from homes of pet owners. A significant positive correlation was found among the four types of QACs analyzed, which suggested usage of these chemicals in combination as mixtures. Based on the concentrations measured in feces, and through a reverse dosimetry approach, the median cumulative daily intakes (CDIs) of QACs were estimated to be 49.4 and 4.75 µg/kg body weight (BW)/day for dogs and cats, respectively. This study provides first evidence that pet dogs and cats are exposed to QACs at significant levels that warrant further attention.

High-Resolution Mass Spectrometry Screening of Quaternary Ammonium Compounds (QACs) in Dust from Homes and Various Microenvironments in South China.

Despite their ubiquitous use, information regarding the presence of quaternary ammonium compounds (QACs) in various microenvironments remains scarce and only a small subset of QACs has been monitored using targeted chemical analysis. In this study, a total of 111 dust samples were collected from homes and various public settings in South China during the COVID-19 pandemic and were analyzed for traditional and emerging QACs using high-resolution mass spectrometry. The total traditional QAC concentrations in residential dust (∑traditional QAC, sum of 18 traditional QACs) ranged from 13.8 to 150 µg/g with a median concentration of 42.2 µg/g. Twenty-eight emerging QACs were identified in these samples, and the composition of ∑emerging QAC (sum of emerging QACs) to ∑QAC (sum of traditional and emerging QACs) ranged from 19 to 42% across various microenvironments, indicating the widespread existence of emerging QACs in indoor environments. Additionally, dust samples from cinemas exhibited higher ∑QAC concentrations compared to homes (medians 65.9 µg/g vs 58.3 µg/g, respectively), indicating heavier emission sources of QACs in these places. Interestingly, significantly higher ∑QAC concentrations were observed in dust from the rooms with carpets than those without (medians 65.6 µg/g vs 32.6 µg/g, p < 0.05, respectively). Overall, this study sheds light on the ubiquitous occurrence of QACs in indoor environments in South China.

Photochemical fate of quaternary ammonium compounds (QACs) and degradation pathways predication through computational analysis.

Quaternary ammonium compounds (QACs) are commonly used in many products, such as disinfectants, detergents and personal care products. However, their widespread use has led to their ubiquitous presence in the environment, posing a potential risk to human and environmental health. Several methods, including direct and indirect photodegradation, have been explored to remove QACs such as benzylalkyldimethyl ammonium compounds (BACs) and alkyltrimethyl ammonium compounds (ATMACs) from the environment. Hence, in this research, a systematic review of the literature was conducted using PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analysis) method to understand the fate of these QACs during direct and indirect photodegradation in UV/H2O2, UV/PS, UV/PS/Cu2+, UV/chlorine, VUV/UV/chlorine, O3/UV and UV/O3/TiO2 systems which produce highly reactive radicals that rapidly react with the QACs, leading to their degradation. As a result of photodegradation, several transformation products (TPs) of QACs are formed, which can pose a greater risk to the environment and human health than the parent QACs. Only limited research in this area has been conducted with fewer QACs. Hence, quantum mechanical calculations such as density functional theory (DFT)-based computational calculations using Gaussian09 software package were used here to explain better the photo-resistant nature of a specific type of QACs, such as BACs C12-18 and ATMACs C12, C14, C18, and their transformation pathways, providing insights into active sites participating in the phototransformation. Recognizing that different advanced oxidation processes (AOPs) come with pros and cons in the elimination of QACs, this review also highlighted the importance of implementing each AOP concerning the formation of toxic transformation products and electrical energy per order (EEO), especially when QACs coexist with other emerging contaminants (ECs).

Cytotoxicity evaluation, antibacterial effect, and degree of conversion of QAM-containing adhesives

Abstract The aim of this study was to evaluate the influence of adding quaternary ammonium methacrylates (QAMs) to experimental adhesives by assessing the degree of conversion (DC), cytotoxicity against keratinocytes and fibroblasts, and antibacterial activity against biofilm formation. Two QAMs were added to an experimental adhesive: dimethylaminododecyl methacrylate bromododecane (DMADDM) or dimethylaminododecyl methacrylate bromohexadecane (DMAHDM) at three concentrations each: 1, 2.5, and 5 wt.%. Experimental adhesive without QAMs (control group) and commercially available Transbond XT Primer (3M Unitek, Monrovia, California, USA) were used for comparisons. The adhesives were tested for DC, cytotoxicity against keratinocytes and fibroblasts, and antibacterial activity against biofilm formation. DC, cytotoxicity against fibroblasts, and antibacterial activity were analyzed using one-way ANOVA and Tukey's multiple comparisons. Cytotoxicity against keratinocytes was evaluated using the Kruskal Wallis and Dunn's post-hoc (α = 5%) tests. Transbond showed lower DC as compared to 5% DMAHDM, 1% DMADDM, and 5% DMADDM (p < 0.05). However, all groups presented proper DC when compared to commercial adhesives in the literature. In the evaluation of cytotoxicity against keratinocytes, Transbond induced higher viability than 2.5 wt.% groups (p < 0.05). Against fibroblasts, Transbond induced higher viability as compared to 5 wt.% groups (p < 0.05). DMAHDM at 5 wt.% reduced biofilm formation when compared to all the other groups (p < 0.05). Despite their cytotoxic effect against keratinocytes, gingival fibroblasts showed higher viability. DMAHDM at 5 wt.% decreased Streptococcus mutans viability. The incorporation of DMAHDM at 5 wt.% may be a strategy for reducing the development of white spot lesions.

Ecotoxicity and rapid degradation of quaternary ammonium compounds (QACs) subjected to combined vacuum UV and UV-C treatment.

Quaternary ammonium compounds (QACs) are active ingredients in a palette of commercially available disinfectants, sanitizers, and biocides. QACs are widely used because of their broad-spectrum antimicrobial properties but the ubiquitous uses have resulted in frequent detection in aquatic and terrestrial matrices including domestic wastewater, surface waters, urban soils and sediments. An increased domestic QACs consumption has increased the environmental occurrence, and investigation of mitigation methods and effects on non-target organisms are in demand. In this study, we examined the potential ecotoxicity of six QACs and investigated the effect of combined vacuum UV (185 nm) and UV-C (254 nm) irradiation (VUV/UVC) on degradation and mitigation of ecotoxicity of QACs. The study showed that combined VUV/UVC irradiation facilitated rapid degradation of benzalkonium chloride, benzethonium chloride, didecyldimethylammonium chloride, dodecyltrimethylammonium chloride, and hexadecyltrimethylammonium chloride. The estimated half-lives varied between 2 and 7 min, and degradation was affected by the initial QAC concentrations, the UV fluence, and the water matrix. The potential ecotoxicity of QACs and VUV/UVC treated QACs was examined using a battery of test organisms that included the luminescent bacterium Aliivibrio fischeri, the gram-negative and gram-positive bacteria Escherichiacoli and Enterococcus faecalis, the freshwater microalga Raphidocelis subcapitata, and the crustacean Daphia magna. The potential for trophic transfer of QACs was investigated in a simplified aquatic food web. Test organisms from different trophic levels were included to assess adverse effects of bioactive compounds in VUV/UVC treated samples including transformation products. The study showed that several QACs were highly toxic to aquatic test organisms with EC50 and/or EC20 values < 1 µM. VUV/UVC treatment of QACs resulted in substantial photolysis of the parent compounds and comprehensive mitigation of the ecotoxicity potential. VUV/UVC represent an attractive oxidation technology for abatement QACs in contaminated water because the process does not require addition of catalysts or precursors.