Non-chemical weed management: Harnessing flame weeding for effective weed control.

The goal of the current study was to create and assess the effectiveness of a hand-pulled ergonomically designed flame weeder. The developed weeder was tested in the field at three operating pressures (20, 30 and 40 Psi) and forward speeds (1.00, 1.25 and 1.50 km/h) to study their effects on plant damage, survival rates, weight preservation rates, weed management effectiveness, soil temperatures, and gas and energy consumption. Thereafter, at optimized values of forward speed and operating pressure, a comparative assessment of flame weeding with traditional methods (mechanical and manual weeding) was done in terms of weed control effectiveness, operational time, energy consumption, and cost of operation. Results showed that the optimal performance of the designed flame weeder was achieved when operated at a speed of 1 km/h and an operating pressure of 40 psi. The survival rate, weight preservation rate, weed control efficiency, change in soil temperature, recovery rate, plant damage, gas consumption, and energy consumption were observed to be 27.3 %, 32.5 %, 91.1 %, 40.74 °C, 8.5 %, 2.2 %, 4.05 kg/h, and 2500.24 MJ/ha, respectively, at optimized values of forward speed (1.00 km/h) and operating pressure (40 Psi). The actual field capacity, field efficiency and operating cost of the flame weeder were 0.0755 ha/h, 94.94 %, and 3620.81 ₹/ha, respectively. Hand weeding had the best level of weed control effectiveness, but it was a laborious, time-consuming process. When compared to manual weeding, flame weeding was 50.42 % cheaper and 94.82 % faster.

Oil-recovery performance of a superhydrophobic sponge-covered disc skimmer.

Frequent oil spill accidents caused by transportation, storage and usage may lead to severe damage on aquatic and ecological environments. Effective methods for rapid oil recovery are urgently in demand. Polyvinyl chloride, hydrophobic nano-SiO2, expanded graphite were separately applied to polyurethane and melamine sponge to fabricate superhydrophobic sponge material. The selected superhydrophobic sponge was introduced to establish sponge - covered disc skimmer. Oil recovery tests of the device were conducted to determine the optimum parameters. The examined operating conditions encompassed sponge thickness, immersion depth, rotational speed, oil slick thickness, operation time. The results showed that the melamine sponge modified by both polyvinyl chloride and hydrophobic nano-SiO2 exhibits super-hydrophobicity with a water contact angle of 150.3°. The absorption capacity for diesel oil can reach 53.89 g/g. The absorption capacity can still achieve 90 % of its initial capacity even after 500 extrusion-absorption separation tests. The results indicate the superiority of the superhydrophobic sponge covered surface in oil recovery over the standard steel surface regardless of the operating conditions. The recovery rate of the device can still achieve 96.4 % of its initial capacity with 95 % efficiency even after 85 h operation. The results suggest the superhydrophobic sponge - covered disc skimmer may have great application perspectives in oil spill recovery.

Recycling of Ti and Si from Ti-bearing blast furnace slag and diamond wire saw silicon waste by flux alloying technique.

Two industrial solid wastes, Ti-bearing blast furnace slag (TBFS) and diamond wire saw silicon waste (DWSSW), contain large amounts of Ti and Si, and their accumulation wastes resources and intensifies environmental pollution. In the present study, DWSSW was used as the silicon source to reduce titanium oxide in TBFS by electromagnetic induction smelting, and meanwhile Na3AlF6 was added as a flux to improve the recycling of the wastes. Ti and Si of the two wastes were simultaneously recovered in the form of alloy. The effects of different addition amount of Na3AlF6 flux in the mixture of DWSSW and TBFS on chemical composition, viscosity, basicity and structure of slag were investigated. The dissolution behavior of SiO2 in Na3AlF6 flux was theoretically deduced and experimentally verification. The optimized recovery rate of Ti and Si were obtained, and the research realizes the efficient recycling of DWSSW and TBFS simultaneously.

Dynamical analysis of a network-based SIR model with saturated incidence rate and nonlinear recovery rate: an edge-compartmental approach.

A new network-based SIR epidemic model with saturated incidence rate and nonlinear recovery rate is proposed. We adopt an edge-compartmental approach to rewrite the system as a degree-edge-mixed model. The explicit formula of the basic reproduction number $ \mathit{\boldsymbol{R_{0}}} $ is obtained by renewal equation and Laplace transformation. We find that $ \mathit{\boldsymbol{R_{0}}} < 1 $ is not enough to ensure global asymptotic stability of the disease-free equilibrium, and when $ \mathit{\boldsymbol{R_{0}}} > 1 $, the system can exist multiple endemic equilibria. When the number of hospital beds is small enough, the system will undergo backward bifurcation at $ \mathit{\boldsymbol{R_{0}}} = 1 $. Moreover, it is proved that the stability of feasible endemic equilibrium is determined by signs of tangent slopes of the epidemic curve. Finally, the theoretical results are verified by numerical simulations. This study suggests that maintaining sufficient hospital beds is crucial for the control of infectious diseases.

Evaluating the Efficacy of Antibiotic Therapy in Non-responsive Sacroiliitis: A Comparative Study.

BACKGROUND: Sacroiliitis, characterized by inflammation of the sacroiliac joints, poses significant challenges in management, especially in patients unresponsive to standard therapies like non-steroidal anti-inflammatory drugs (NSAIDs) and physical therapy. This study aimed to evaluate the efficacy of antibiotic therapy in such patients, addressing a critical gap in the current treatment approach. METHODS: A total of 360 patients with lower back pain who presented to the outpatient department (OPD) of the Department of Orthopedics of a medical college in Northern India for six months were included in this study. With meticulous history taking, clinical examination, and radiological evaluation, 59 patients were diagnosed with sacroiliitis, out of which 31 were males and 28 were females, aged between 20 and 40 years, and were enrolled in this cross-sectional comparative study. Patients were divided into two groups: a control group (21 patients) receiving conventional treatment without antibiotics and a study group (38 patients) receiving conventional treatment plus antibiotics (who gave consent for treatment with antibiotics). The primary outcome was assessed using the Japanese Orthopaedic Association (JOA) score, with evaluations conducted at baseline, one month, and three months. Recovery rates were also calculated. SPSS trial software version 27 (IBM Corp., Armonk, NY) was used for statistical analysis. RESULTS: Both groups exhibited improvement in JOA scores over time. At the one-month and three-month follow-ups, the mean JOA scores and recovery rates showed no statistically significant difference between the control and study groups (p-values > 0.05). Adverse effects related to antibiotic use were not significant. CONCLUSION: The study concludes that the addition of antibiotics to the conventional treatment regimen for sacroiliitis does not provide significant benefit in terms of functional recovery or pain relief in patients non-responsive to NSAIDs and/or physical therapy. These findings underscore the importance of a targeted treatment approach based on the specific etiology of sacroiliitis and caution against unnecessary antibiotic use.

Assessing protein and albumin recovery rates in different ascites filtration membrane washing methods for cell-free and concentrated ascites reinfusion therapy.

Objectives: In cell-free and concentrated ascites reinfusion therapy (CART), the protein recovery rate decreases when the filtration membrane gets clogged. Employing a device with a filtration membrane washing feature prevents clogging, but it leads to the loss of ascites within the filter, resulting in reduced protein recovery. This study employed a device with a membrane washing function to investigate the relationship between protein recovery rate and the quantity of washing solution used, depending on the selected washing method. Methods: We analyzed cases of CART conducted at Fujita Health University Hospital between May 2021 and November 2022. The cases were divided and compared between two groups: one using flush and rinse as the washing method (flush+rinse group) and another using only flushing (flush group). Results: We identified nine cases and 16 sessions. In the flush+rinse group, the median amount of washing solution used per membrane washing was 259 mL per cycle, whereas it was 54 mL per cycle in the flush group. This difference was statistically significant (p<0.0001). The median total protein recovery rate was 53.8% for the flush+rinse group and 78.8% for the flush group, with the latter showing a significantly higher value (p=0.0199). Conclusions: In CART using a membrane washing function, adopting a washing method that reduces the amount of washing solution leads to an increase in the total protein recovery rate.

Declined terrestrial ecosystem resilience.

Terrestrial ecosystem resilience is crucial for maintaining the structural and functional stability of ecosystems following disturbances. However, changes in resilience over the past few decades and the risk of future resilience loss under ongoing climate change are unclear. Here, we identified resilience trends using two remotely sensed vegetation indices, analyzed the relative importance of potential driving factors to resilience changes, and finally assessed the risk of future resilience loss based on the output data of eight models from CMIP6. The results revealed that more than 60% of the ecosystems experienced a conversion from an increased trend to a declined trend in resilience. Attribution analysis showed that the most important driving factors of declined resilience varied regionally. The declined trends in resilience were associated with increased precipitation variability in the tropics, decreased vegetation cover in arid region, increased temperature variability in temperate regions, and increased average temperature in cold regions. CMIP6 reveals that terrestrial ecosystems under SPP585 are expected to experience more intense declines in resilience than those under SSP126 and SSP245, particularly in cold regions. These results highlight the risk of continued degradation of ecosystem resilience in the future and the urgency of climate mitigation actions.

What is the effect of reducing the air change rate on the ventilation effectiveness in ultra-clean operating rooms?

BACKGROUND: The operating room (OR) department is one of the most energy-intensive departments of a hospital. The majority of ORs in the Netherlands have an air-handling installation with an ultra-clean ventilation system. However, not all surgeries require an ultra-clean OR. AIM: To determine the effect of reducing the air change rate on the ventilation effectiveness in ultra-clean ORs. METHODS: Lower air volume ventilation effectiveness (VELv) of conventional ventilation (CV), controlled dilution ventilation (cDV), temperature-controlled airflow (TcAF) and unidirectional airflow (UDAF) systems were evaluated within a 4 × 4 m measuring grid of 1 × 1 m. The VELv was defined as the recovery degree (RD), cleanliness recovery rate (CRR) and air change effectiveness (ACE). FINDINGS: The CV, cDVLv and TcAFLv ventilation systems showed a comparable mixing character in all areas (A, B and AB) when reducing the air change rate to 20/h. Ventilation effectiveness decreased when the air change rate was reduced, with the exception of the ACE. At all points for the UDAF-2Lv and at the centre point (C3) of the TcAFLv, higher RD10Lv and CRRLv were measured when compared with the other examined ventilation systems. CONCLUSIONS: The ventilation effectiveness decreased when an ultra-clean OR with an ultra-clean ventilation air-supply system was switched to an air change rate of 20/h. Reducing the air change rate in the OR from an ultra-clean OR to a generic OR will reduce the recovery degree (RD10) by a factor of 10-100 and the local air change rate (CRR) by between 42% and 81%.

Quantitative and Qualitative Evaluation of Plant Intake in Laying Hens: n-Alkanes as Predictive Fecal Markers for Dietary Composition Assessment.

The shift in animal welfare standards towards free-range housing for laying hens in the EU has raised questions about changes in dietary composition. Accurate assessment of outdoor plant material intake is crucial for effective feeding strategies. This study introduces an approach using n-alkanes as markers to determine plant intake in laying hens, involving n-alkane recovery rate assessment, discriminant analysis and linear equation-solving for both qualitative and quantitative assessment, respectively, considering systematic n-alkane combinations. Two diets: a standard commercial diet and a diet incorporating 1% alfalfa were tested. Chemical analyses showed an altered n-alkane profile due to alfalfa inclusion, resulting a recovery rates ranging from 30-44% depending on the n-alkane type and diet. Statistical analysis revealed significant differences in recovery rates among the different alkanes for the same diets and between the diets for the same alkane, together with an interaction between n-alkane carbon chain length and initial concentration in the diet. The method accurately predicted plant inclusion, with a slight overestimation (2.80%) using the combination C25-C29-C33. Accurate qualitative classification of the animals based on fecal n-alkanes profiles was observed. The study successfully demonstrated the utility of n-alkanes for estimating dietary composition, providing a non-invasive approach for future free-range studies.

Taking cues from machine learning, compartmental and time series models for SARS-CoV-2 omicron infection in Indian provinces.

SARS-CoV-2, the virus responsible for COVID-19, posed a significant threat to the world. We analyzed COVID-19 dissemination data in the top ten Indian provinces by infection incidences using the Susceptible-Infectious-Removed (SIR) model, an Autoregressive Integrated Moving Average (ARIMA) time series model, a machine learning model based on the Random Forest, and distribution fitting. Outbreaks are expected to continue if the Basic Reproduction Number (R0) > 1, and infection waves are anticipated to end if the R0 < 1, as determined by the SIR model. Different parametric probability distributions are also fitted. Data collected from December 12, 2021, to March 31, 2022, encompassing data from both before and during the implementation of strict control measures. Based on the estimates of the model parameters, health agencies and government policymakers can develop strategies to combat the spread of the disease in the future, and the most effective technique can be recommended for real-world application for other outbreaks of COVID-19. The best method out of these could be also implemented further on the epidemiological data of other similar infectious agents.

Variance reflects resilience to disturbance along a stress gradient: Experimental evidence from coastal marshes.

Quantifying ecosystem resilience to disturbance is important for understanding the effects of disturbances on ecosystems, especially in an era of rapid global change. However, there are few studies that have used standardized experimental disturbances to compare resilience patterns across abiotic gradients in real-world ecosystems. Theoretical studies have suggested that increased return times are associated with increasing variance during recovery from disturbance. However, this notion has rarely been explicitly tested in field, in part due to the challenges involved in obtaining long-term experimental data. In this study, we examined resilience to disturbance of 12 coastal marsh sites (five low-salinity and seven polyhaline [=salt] marshes) along a salinity gradient in Georgia, USA. We found that recovery times after experimental disturbance ranged from 7 to >127 months, and differed among response variables (vegetation height, cover and composition). Recovery rates decreased along the stress gradient of increasing salinity, presumably due to stress reducing plant vigor, but only when low-salinity and polyhaline sites were analyzed separately, indicating a strong role for traits of dominant plant species. The coefficient of variation of vegetation cover and height in control plots did not vary with salinity. In disturbed plots, however, the coefficient of variation (CV) was consistently elevated during the recovery period and increased with salinity. Moreover, higher CV values during recovery were correlated with slower recovery rates. Our results deepen our understanding of resilience to disturbance in natural ecosystems, and point to novel ways that variance can be used either to infer recent disturbance, or, if measured in areas with a known disturbance history, to predict recovery patterns.

Optimization of glass separating funnels to facilitate microplastic extraction from sediments.

Recent studies on the distribution of microplastics in aquatic sediments have deployed different methods and devices for density separation of microplastics from sediments. However, instrument specific limitations have been noted, including their high cost, difficulty in handling, or/and the potential for elevated contamination risk due to their plastic composition. This study improves existing sediment microplastic separation techniques by modifying the commonly used conical shape glass separating funnels. The modification consists in connecting a silicone tube at the base of the funnel, whose opening and closure was manually controlled by a Mohr clamp. This adjustment made to the funnels have effectively mitigated critical clogging problems frequently encountered in density separation units. An experiment was conducted using sand-based sediment spiked with polyamide fragments to validate this method modification. Following a complete extraction protocol with the modification of separating funnels, the microplastic extraction efficiency from sediments was high with a 90% recovery rate. Based on these promising results, future studies should consider naturally diverse substrates, as recovery efficiency may be sediment-dependent. Two key adjustments to the glass separation funnels:•Removal of stopcocks•Use of silicone tubes and Mohr clamps to control sediment release.

Promoting wound recovery through stable intestinal flora: Reducing post-operative complications in colorectal cancer surgery patients.

In recent years, the relationship between intestinal flora and post-operative recovery, particularly in colorectal cancer (CRC) surgery patients, it has been hypothesized that intestinal flora stability influences wound healing, reduces complications and improves overall recovery outcomes after surgical interventions. This study examined the relationship between intestinal flora stability and post-operative recovery in patients undergoing CRC surgery. Between May 2020 and 2023, 80 CRC patients from our hospital's Colorectal Surgery Department were enrolled. A random number table was used to divide them into two categories. Both groups were subjected to distinct gastrointestinal preparation protocols. Indicators of clinical therapeutic effect, intestinal flora balance following surgery, post-operative complications and quality of life were evaluated. The observation group, which adhered to a distinct gastrointestinal regimen, demonstrated a statistically significant improvement in post-operative outcomes, with a clinical effectiveness rate of 97.5% compared to the control group's 75%. In addition, the observation group had a lower incidence of intestinal flora imbalance following surgery than the control group. The observation group had lower incidences of intestinal obstruction, infection, anastomotic leakage, incisional tumour implantation and delayed diarrhoea. Using the KPS score and the BMI, post-treatment assessments of the observation group's quality of life revealed significant enhancements in comparison to the control group. Additionally, wound healing rates were superior in the observation group, with a correlation between stable intestinal flora and decreased wound infection rates. The type of post-operative diet influenced the stabilization of the gut flora, with a high-fibre diet producing superior results in both groups. The stability of intestinal flora influences the post-operative rehabilitation of patients undergoing CRC surgery favourably. Appropriate bowel preparation and dietary considerations can reduce post-operative complications, improve wound healing rates and enhance overall quality of life.

Effects of Phytase Source and Dose on Its Stability during Pelleting Process under Different Conditioning Temperatures.

Phytase activity can be impaired during pelleting because of extreme thermal conditions. This study investigated the effects of dose and source of phytase on phytase activity during the conditioning, pelleting, and cooling process. A split-plot design was used in two experiments, with five phytase doses (Exp. 1; 7560, 14310, 33830, 43590 and 61500 FTU/kg) or eight phytase sources (Exp. 2) as the main plot and steam conditioning temperatures (Exp. 1 and 2; 75 and 85 °C) as the subplot. Each treatment processed four batches, one batch per replicate. The results of Exp. 1 showed phytase dose in diets had no effect (p > 0.05) on the recovery rate of phytase activity after the conditioning, pelleting, or cooling process. The recovery rate of phytase activity in each process was higher (p < 0.05) at 75 °C than that at 85 °C for both Exp. 1 and 2. The phytase source significantly affected (p < 0.05) the recovery rate of phytase activity and had varied appearances of structure. In conclusion, the structure, phytase activity, and phytase recovery after steam conditioning-pelleting significantly varied across sources, but the stability of phytase was not affected by dose.

On Impact Damage and Repair of Composite Honeycomb Sandwich Structures.

This study is conducted on glass fiber-reinforced composite honeycomb sandwich structures by introducing delamination damage through low-velocity impact tests, establishing a three-dimensional progressive damage analysis model, and evaluating the delamination damage characteristics and laws of honeycomb sandwich structures under different impact energies through experiments. Repair techniques and process parameters for delamination damage are explored. It is found that as the impact energy increases, the damage area of honeycomb sandwich panels also increases, and the delamination damage extends from the impact center to the surrounding areas, accompanied by damage such as fiber fracture and matrix cracking. The strength recovery rates of sandwich panels at impact energies of 5 J, 15 J, and 25 J after repair are 71.90%, 65.89%, and 67.10%, respectively, which has a considerable repair effect. In addition, a progressive damage model for low-velocity impact on the composite honeycomb sandwich structure is established, and its accuracy and reliability are verified.

Performance evaluation of protocols for Taenia saginata and Ascaris suum egg recovery from the house fly's gastrointestinal tract and exoskeleton.

BACKGROUND: The synanthropic house fly (Musca domestica) can potentially contribute to the mechanical spread of eggs of Taenia and Ascaris spp. in the environment and between hosts. However, the absence of validated protocols to recover eggs hampers an in-depth analysis of the house fly's role in parasite egg transmission. METHODS: The gastrointestinal tract and exoskeleton of euthanized house flies were spiked with Taenia saginata eggs. The performance of several recovery protocols, in terms of both the recovery rate and ease-of-use, was (microscopically) evaluated and compared. These protocols employed steps such as washing, maceration, filtration, flotation and both passive and centrifugal sedimentation. The final validated protocols were subsequently evaluated for the recovery of Ascaris suum eggs. RESULTS: The final protocol validated for the recovery of T. saginata eggs from the house fly's gastrointestinal tract involved homogenization in phosphate-buffered saline and centrifugation at 2000 g for 2 min, yielding a recovery rate of 79.7%. This protocol required 6.5 min to perform (which included 1.5 min of hands-on time) and removed large debris particles that could hinder the differentiation of eggs from debris. Similarly, the final protocol validated for the recovery of T. saginata eggs from the fly's exoskeleton involved washing by vortexing for 2 min in Tween 80 (0.05%), 15 min of passive sedimentation and centrifugation at 2000 g for 2 min, yielding a recovery rate of 77.4%. This protocol required 20.5 min to perform (which included 3.5 min of hands-on time) and successfully removed debris. The same protocols yielded recovery rates of 74.2% and 91.5% for the recovery of A. suum eggs from the fly's gastrointestinal tract and exoskeleton, respectively. CONCLUSIONS: Effective, simple and easy-to-use protocols were developed and validated for the recovery of T. saginata and A. suum eggs from the house fly's gastrointestinal tract and exoskeleton. These protocols can be applied to investigate the importance of flies as parasite egg transmitters in laboratory and field settings.

The Effect of Cervical Cold-Knife Conization (CKC) on HPV Infection in Patients with High-Grade Cervical Intraepithelial Neoplasia: A Retrospective Study.

Purpose: Investigation of HPV infection treatment in women undergoing cervical cold-knife conization for advanced cervical intraepithelial neoplasia. Patients and Methods: A retrospective analysis was conducted on patients who underwent cervical cold-knife conization for cervical intraepithelial neoplasia grade II-III at Beijing Obstetrics and Gynecology Hospital from January 2017 to December 2018. The HPV infection status of the patients at 6 months, 1 year, and 2 years after surgery was collected. We use chi square analysis and binary logistic regression to evaluate various factors such as age, number of pregnancies, number of cesarean sections, number of vaginal deliveries, HPV type, size of surgical specimens (diameter and height), and the influence of specimen edge on HPV infection. Results: A total of 334 patients were included in the analysis. The patients are mainly infected with HPV 16/58/52. Age is a influencing factor for HPV recovery 12 months after CKC surgery (P=0.002). Based on the diagnosis of HPV one year after CKC, the recovery rate of HPV58 patients is significantly lower than HPV16. Age is a influencing factor for the recovery of HPV infection (P<0.05). Conclusion: The treatment of HPV infection by CKC is related to the patient's age and HPV subtype but not to number of pregnancies, number of pregnancies, number of vaginal deliveries, size of surgical specimens, and marginal conditions. The rate of HPV negative conversion is relatively high 24 months after the patient does not undergo surgery, but there is currently a lack of data on cervical lesions that match HPV results.

Effect of Capsule Burst in Cigarette Filters on the Compound Composition of Mainstream Cigarette Smoke.

The number of cigarette capsule users is increasing; however, a comprehensive epidemiological investigation comparing the harmfulness of capsule and non-capsule cigarettes, particularly concerning the composition of flavor components and mainstream smoke, is lacking. The present study aimed to investigate the effect of capsule burst on the compound composition of mainstream smoke by quantifying the Hoffmann list and flavor (geraniol, eugenol, menthofuran, and pulegone) in mainstream smoke with and without crushing the capsules. The findings indicate that while tar values tended to increase when the capsules were burst, there was no significant change observed in the other Hoffmann list components, such as nicotine, benzo[α]pyrene, tobacco-specific nitrosamines, aromatic amines, and phenolics. However, when the capsules burst, menthofuran and pulegone, which were present in the capsule and could cause toxicity, were found in the mainstream smoke via the International Standard Organization (1.5-4.0 µg/cig and 5.13-6.00 µg/cig smoking regime) and Health Canada Intense (12.8-18.2 µg/cig and 22.77-24.67 µg/cig smoking regime). Therefore, understanding the capsule composition is important, as the toxic components of the capsules can be inhaled as smoke, posing a potential health risk.

Advancing Quantification of Water-Extractable Arabinoxylan in Beer: A High-Throughput Approach.

Water-extractable arabinoxylan (WEAX) may cause major problems during clarification processes in a brewery owing to its ability to form gel networks. However, high WEAX contents can also enhance the nutritional quality of the final product as they play an important role in the human diet. Therefore, precise quantification of WEAX is required. Current methods are very time- and resource-consuming as well as limited in the number of samples and in some cases provide low accuracy. Thus, a reproducible high-throughput method for the quantification of WEAX optimized for beer was developed, reaching recovery rates (RRs) of almost 100%. The assay is based on Douglas's colorimetric method. Hydrolysis was conducted using glacial acetic acid to induce the formation of red color complexes resulting from the interaction between pentose degradation products and phloroglucinol. The method was successfully transferred to a multi-mode microplate reader to minimize the loss of color intensity over time and to obtain a high throughput. By using 96-well plates, up to 40% of the previous analysis time could be saved, and a larger number of samples could be analyzed in one batch. The collected data determined xylose as an optimal calibration standard due to high accuracy and reproducibility. The respective AX control standards showed RR within the range of 95-105% without exception. To validate and show the ruggedness of the modified method, WEAX concentration in seven commercial German beers (e.g., lager, pilsner, wheat beer, non-alcoholic beer) was quantified. Interfering hexose sugars that lead to measurement errors when analyzing samples with high amounts of fermentable sugars (e.g., non-alcoholic beer produced by limited fermentation) were eliminated by Saccharomyces diastaticus fermentation. Further investigations were carried out by means of LC-MS in order to obtain additional information about the reddish product in the hydrolyzed samples. In this context, C16H12O6 could be identified as one of numerous condensation products, contributing to the coloring. The collected data showed the impact of diverse factors on the measured AX concentration and helped optimize the experimental procedure for a high sample throughput with precise and highly reproducible results. The proposed quantification method should be primarily used in completely fermented finished beer to emphasize the time aspect. Wort samples and non-alcoholic beer produced by limited fermentation can be also analyzed, but only after fermentation with S. diastaticus.

Prospects of recycling from end-of-life of Li-ion batteries on alleviating materials demand-supply gap in new electric vehicles in Asia.

The acceptance of battery electric vehicles (BEVs) is continuously increasing to mitigate CO2 emissions, resulting in an increase in the future material demand for LIBs. Therefore, the proper handling of End-of-life (EOL) BEV batteries requires careful attention to mitigate the supply chain issues for future LIBs materials, especially in Asia. A system dynamics model assessment was performed to evaluate the EOL of LIBs by considering the dynamic lifespan, recovery rate, and economic value under three growth rate scenarios in Asia from 2022 to 2030, depending on the battery chemistry over time. We find that comparing three different scenarios to materials demand, the result showed that materials demand for LIBs is greater in higher scenarios as compared with lower and reference scenarios. Moreover, in the low scenario, the nickel demand and recovery from end-of-life LIBs BEVs will achieve 244.0 and 43.28 kt in 2030. Based on the dynamic economic evaluation, an overall, higher potential economic value of all materials would achieve around 1471 million USD in 2030 in the low scenario. This study manifested that recycling LIBs materials has enormous economic potential and would be a step towards economic sustainability, especially in Asia in the near future.