The Effect of Non-Invasive Treatment Techniques on the Color Masking Ability and Surface Roughness of Induced Enamel Lesions (An in vitro Study).

Aim of the Study: The aim of this in vitro study was to evaluate the effect of the resin infiltration technique and remineralization of induced enamel caries with fluoride solution on the color masking of white spot lesions and surface roughness. Materials and Methods: A total of 45 sound teeth were used in this study. All the teeth were sectioned along the long axes into two halves, lingual and buccal to get 90 specimens. All specimens were immersed in a demineralized solution for 7 days. The specimens were divided randomly into three equal groups (n = 30) according to the type of treatment; Group 1 (n = 30) was treated with fluoride varnish (Clinpro); Group 2 (n = 30) was treated by resin infiltration (Icon); and Group 3 (n = 30) was used as a control group with no treatment. The color and surface roughness were measured three times at baseline (T1), directly after induction of artificial white spot lesions (WSLs) (T2), and directly after application of the treatment options (T3). The colors were measured using a portable reflective spectrophotometer and the 3D surface roughness was measured using a Light Sectioning Vision System. Data were collected and statistically analyzed using T test and Mann-Whitney U test. The Results: Surface roughness was almost equal in the study groups with no statistically significant differences reported. Icon showed slightly higher color scores than that of ClinPro. Conclusions: The Icon produced favorable esthetic results compared to the fluoride therapy while no significant differences were reported regarding the surface roughness.

Influence of different pre-treatments on the resin infiltration depth into enamel of teeth affected by molar-incisor hypomineralization (MIH).

OBJECTIVES: This in vitro pilot study aimed to evaluate whether different pre-treatments (demineralization, deproteinization, (chemo-)mechanical reduction of the surface layer) influence the penetration depth of a resin infiltrant into MIH-affected enamel compared to initial carious lesions. METHODS: Thirty extracted human permanent molars with non-cavitated initial carious lesions (n = 5) or MIH (n = 25) were chosen and randomly assigned to six experimental groups: IC: initial caries; M: MIH; MN: MIH, 5.25% sodium hypochlorite; MM: MIH, microabrasion; MA: MIH, air abrasion; MAN: MIH, air abrasion and 5.25% sodium hypochlorite. A modified indirect dual fluorescence staining method was adopted to assess the penetration depth (PD) of the resin infiltrant and the lesion depth (LD) by confocal laser scanning microscopy (CLSM). Exemplarily, scanning electron microscopic (SEM) images were captured. The relationship between group assignment and penetration/lesion depth was estimated using a linear mixed model incorporating the tooth as random effect (two observations/tooth). The significance level was set at p < 0.05. RESULTS: For MIH-affected molars, the mean PD (in µm; median, [minimum-maximum]) were M (178.2 [32.5-748.9]), MN (275.6 [105.3-1131.0]), MM (48.7 [0.0-334.4]), MA (287.7 [239.4-491.7]), and MAN (245.4 [76.1-313.5]). Despite the observed differences in PD between the groups, these could not be statistically verified (Bonferroni, p = 0.322). The percentage penetration was significantly higher for IC than for MIH groups (Bonferroni, p < 0.05). SIGNIFICANCE: Compared to IC, resin infiltration into MIH-affected enamel ist more variable. Different pre-treatments influence the resin penetration into developmentally hypomineralized enamel to a fluctuating level.

Resin infiltration versus fluoride varnish for visual improvement of white spot lesions during multibracket treatment. A randomized-controlled clinical trial.

AIMS: This study aimed to evaluate the visual improvement of resin infiltration of white spot lesions (WSL) during orthodontic treatment with the multibracket appliance (MBA) compared to fluoride varnish. METHODS: Patients aged 12-17 years with at least one WSL with an International Caries Detection and Assessment System (ICDAS) score of 1-2 during an active MBA treatment were included and randomized to receive either resin infiltration (Icon) or fluoride application (Flairesse). Standardized digital images were obtained before, one-day, one-week, one-month, three-months and six-months after treatment using a DSLR camera and a matching polarization filter. A grey reference card was used for color standardization. A Matlab routine was used to measure the color difference between adjacent healthy enamel and treated WSL. The independent-samples t-test was used for intergroup and paired-samples t-test for intragroup comparison. RESULTS: Images of 116 teeth from 36 patients were analyzed. The ΔE for the "Icon" treated WSL was smaller (T1ICON = 5.0 ± 1.4) than in the fluoride group (T1Fluoride = 8.4 ± 3.2). Caries infiltration significantly improved the aesthetic appearance of WSL (p < 0.001), which remained satisfactory at six months (T5ICON = 5.2 ± 1.6). CONCLUSION: WSL infiltration management during orthodontic treatment was superior to topical fluoridation in not only arresting the enamel lesions but also significantly improving the aesthetic appearance of demineralized regions around the brackets. CLINICAL RELEVANCE: WSL treatment in orthodontic patients is usually initiated after debonding. Research has shown that the earlier WSL is treated, the better the aesthetic outcome. There is limited data on the efficacy of resin infiltration of WSL during orthodontic treatment.

Evaluation of resin infiltration for inhibiting initial caries progression: An in vitro study using Micro-Computed Tomographic analysis.

Objective: To evaluate the changes in lesion depth and mineral density of resin infiltration-treated white spot lesions against a simulated oral environment using thermal and acidic challenges in vitro. Materials and methods: Two enamel slabs were prepared from each buccal surface of permanent human premolars, for a total of 56 slabs. Artificial white spot lesions were induced. One specimen was treated with resin infiltration, while the other was used as an untreated control. A micro-CT was used to assess the lesion depth and mineral density of each specimen. Subsequently, all specimens were subjected to 10,000 cycles of thermocycling and pH cycling for 10 days before being re-evaluated using the micro-CT. Lesion depth and mineral density were examined and compared between before and after aging procedures within each group by the paired sample t-test. The independent samples t-test was utilized to compare lesion depth progression and percentage change of mineral density between groups. Results: After aging, there was both a significant lesion depth progression and a mineral loss in the control and resin infiltration groups. Mean lesion depth progression was 132.88 ± 4.18 µm for the control group and 52.31 ± 4.16 µm for resin infiltration group. Percentage mineral density loss as a percentage for the control and resin infiltration groups were 16.1 ± 0.64 % and 8.83 ± 0.30 %, respectively. The resin infiltration group demonstrated a significantly lower mean lesion depth progression and percentage changes in mineral loss compared to the control group. Conclusions: The lesion depth and mineral density changes in the resin infiltrated-treated group were lower than untreated white spot lesions after aging procedures using thermal and acidic challenges. Clinical significance: Resin infiltration is a promising approach to inhibit the progression of white spot lesions related to the initial stage of dental caries.

Effect of Bleaching on Resin-Infiltration-Masked Artificial White Spots In Vitro.

Resin infiltration is an effective method to mask vestibular white spots. If needed, external bleaching is usually recommended before infiltration, whilst in clinical practice, this sequence may not always be feasible. This in vitro study evaluated the effect of bleaching after resin infiltration regarding surface roughness and color using bovine incisors. Unlike for the untreated specimens (control, n = 25), artificial caries lesions were created within the test group (n = 25) using a demineralization solution at 37 °C for five days (pH = 4.95). The lesions were subsequently infiltrated using a resin infiltrant (Icon, DMG, Hamburg, Germany), followed by polishing. Afterwards, all specimens were bleached with a 10% carbamide peroxide gel (Opalescence, Ultradent, South Jordan, UT, USA) for 8 h/day over a ten-day period. Between bleaching treatments, specimens were stored in an opaque container with moistened paper tissues at 37 °C. Surface roughness was measured using a profilometer, and color in the L*a*b* space was assessed spectrophotometrically before and after bleaching. Bleaching increased the L*-values of both infiltrated (mean ± SD; ΔL* = 3.52 ± 1.98) and untreated (control) specimens (ΔL* = 3.53 ± 2.30) without any significant difference between the groups (p = 0.983). Bleaching also induced a significant increase in the mean surface roughness of both infiltrated (p < 0.001) and untreated (p = 0.0134) teeth. In terms of clinical relevance; it can be concluded that bleaching resin-infiltrated enamel is as effective as bleaching sound enamel.

Equivalence study of the resin-dentine interface of internal tunnel restorations when using an enamel infiltrant resin with ethanol-wet dentine bonding.

This preregistered ex vivo investigation examined the dentinal hybrid layer formation of a resinous infiltrant (Icon), with reference to both thickness (HLT) and homogeneity when combined with modified tunnel preparation (occlusal cavity only) and internal/external caries infiltration. The adhesives Syntac and Scotchbond MP were used as controls (Groups 1 and 3) or in combination with Icon (Groups 2 and 4). A split-tooth design using healthy third molars from 20 donors resulted in 20 prepared dentine cavities per experimental group. The cavity surfaces (n = 80) were etched (37% H3PO4), rinsed, and air-dried. Rewetting with ethanol was followed by application of the respective primers. After labeling with fluorescent dyes, either Syntac Adhesive/Heliobond or Scotchbond MP Adhesive was used alone or supplemented with Icon. HLT, as evaluated by scanning electron microscopy, did not significantly differ (P > 0.05), and confocal laser scanning microscopy revealed homogeneously mixed/polymerized resin-dentine interdiffusion zones in all groups. Icon can be successfully integrated into an ethanol-wet dentine bonding strategy, and will result in compact and homogeneous hybrid layers of comparable thickness considered equivalent to the non-Icon controls, thus allowing for preservation of the tooth's marginal ridge and interdental space in the case of internal/external infiltration of proximal caries.

Resin infiltration for white spot lesions: An in vitro experimental trial.

OBJECTIVE: To evaluate the aesthetic outcome by varying the duration allowed for infiltrant penetration when treating white spot lesions with resin infiltration. DESIGN: An in vitro, experimental randomised study. METHODS: Artificially created white spot lesions (WSLs) were induced on 100 extracted anterior teeth (T1). Teeth were divided into enamel and dentine groups depending on the extent of the lesion and then randomly assigned into different treatment protocol groups: penetration times of 3, 6 and 9 min. Resin infiltration treatment was applied according to the treatment protocol assigned (T2). Samples were thermocycled for 10,000 cycles (1 clinical year) (T3). The samples from the 3-min enamel and dentine groups were then randomly assigned into either a repeat treatment or no additional treatment group (T4). Samples were then thermocycled for an additional 10,000 cycles (T5). Spectrophotometric analysis was measured colour change (ΔE) for all groups. RESULTS: Mean ΔE values equal to or greater than the critical value (3.7) indicate a detectable clinical difference in colour of the treated WSL when compared to before WSL formation. Mean ΔE values, for the enamel groups, were slightly above or significantly below the critical value, and for the dentine groups, were significantly above the critical value. Mean ΔE values within the enamel and dentine groups both demonstrated a downward trend with increasing time allowed for resin infiltrant penetration (P < 0.05). No significant mean ΔE difference (P = 0.53) was found between groups that received a single or repeat treatment. After the first thermocycling event, no significant difference in colour change was observed in all groups except for the deep dentine lesion treated for 3 min. There was a significant difference in colour change for all groups except the enamel group that received a single treatment following thermocycling after a single or repeat treatment. CONCLUSION: Increasing the resin infiltrant penetration time to at least 9 min is advised as the most optimised treatment protocol. Resin infiltration treatment should be done only once to treat a particular white spot lesion as subsequent treatment for the same lesion results in marginal colour improvement. The colour improvement of WSLs resulting from the resin infiltration treatment can be expected to last for at least 1 year. Resin infiltration treatment of shallow lesions with a single and optimised infiltration technique can be expected to last an additional year.

Infiltração resinosa em lesões brancas cariosas e não cariosas: relato de casos / Infiltración resinosa em lesiones blancas cariosas y no cariosas: Reporte de Casos / Resinous infiltration in carious and non-carious white lesions: Case Reports

Introdução: O processo de desmineralização proveniente da cárie leva à formação de manchas brancas que são a primeira manifestação visível da doença. Os infiltrantes resinosos surgem como uma alternativa para o tratamento dessas lesões não cavitadas, pois sãoresinas de baixa viscosidade e faz parte dos procedimentos que visam uma odontologia menos invasiva. Objetivo: Este estudo objetiva relatar a experiência clínica no uso de infiltrante resinoso, Icon, em lesões de mancha branca de etiologias cariosa e não cariosa em dois pacientes distintos, insatisfeitos com a estética do seu sorriso. Descrição do caso: Ao exame clínico foi observado nos pacientes com lesões brancas. No primeiro paciente, de 14 anos, verificou-se a presença da atividade de cárie e micro cavitações. Dessa forma, o plano de tratamento perpassou orientação de higiene oral supervisionada, aplicação de verniz fluoretado, Enamelast, semanal, adequação do meio com restaurações em resina, e só então o uso do infiltrante. A segunda paciente, de 11 anos, já possuía saúde bucal adequada e tinha queixa estética devido à lesão branca não cariosa, hipoplasia, cujo plano de tratamento foi à utilização do Icon apenas. Conclusões: Nos dois casos obteve-se melhoria estética considerável com este procedimento microinvasivo. Melhoria na saúde bucal, aliado à devolução da estética, pode ser observada com o uso de infiltrantes resinosos (AU).

Introduction: The process of demineralization resulting from caries leads to the formation of white spots that are the first visible manifestation of the disease. Resin infiltrants appear as an alternative for the treatment of these non-cavitated lesions, since they are low viscosity resins and are part of the procedures that aim at a less invasive dentistry.Objective:This study aims to report the clinical experience in the use of a resin infiltrant, Icon,in white spot lesions of carious and non-carious etiologies in two different patients who were dissatisfied with the esthetics of their smiles.Methodology: On clinical examination, white lesions were observed in both patients. In the first patient,14 years old,the presence of caries activity and micro cavitations was verified. Thus, the treatment plan included supervised oral hygiene guidance, weekly application of fluoride varnish,Enamelast, adaptation of the environment with resin restorations, and, onlythen, the use of the infiltrant, Icon. The second patient, 11 years old,already had adequate oral health and had an esthetic complaint due to a non-carious white lesion, hypoplasia, whose treatment plan consisted of the use of Icon only.Conclusions:In both cases considerable esthetic improvement was obtained with this microinvasive procedure. Improvement in oral health, combined with the return of esthetics, can be observed with the use of resin infiltrants (AU).

Introducción: El proceso de desmineralización resultante de la caries conduce a la formación de manchas blancas, que son la primera manifestación visible de la enfermedad. Losinfiltrantes de resina aparecen como una alternativa para el tratamiento de estas lesiones no cavitadas, pues se tratan de resinas de baja viscosidad y forman parte de los procedimientos que buscan una odontología menos invasiva. Objetivo:Este estudio tiene como objetivo relatar la experiencia clínica en el uso del infiltrante de resina,Iconen lesiones de mancha blanca de etiologías cariosas y no cariosas en dos pacientes diferentes, insatisfechos con la estética de sus sonrisas.Metodología: En el examen clínico se observaron lesiones blancas en ambos pacientes. En el primer paciente, 14 añosse verificó la presencia de actividad de caries y micro cavitaciones. De ese modo, el plan de tratamiento incluyó la orientación supervisada de la higiene bucal,la aplicación semanal de barniz de flúor (Enamelast), la adaptación del entorno con restauraciones de resina y, sólo después, el uso del infiltrante,Icon. La segunda paciente, 11 años,ya tenía una salud bucal adecuada y presentaba una queja estética debido a una lesión blanca no cariosa, hipoplasia, cuyo plan de tratamiento fue el uso exclusivo de Icon. Conclusiones: En ambos casos, se consiguió una mejora estética considerable con este procedimiento microinvasivo. La mejora de la salud bucal, unida a la recuperación de la estética, puede observarse con el uso de infiltrantes de resina (AU).

Aesthetic impact of resin infiltration and its mechanical effect on ceramic bonding for white spot lesions.

BACKGROUND: Treating white spot lesions (WSLs) with resin infiltration alone may not be sufficient, raising questions about its compatibility with other treatments amid controversial or incomplete data. Therefore, this study aimed to assess the aesthetic feasibility of resin infiltration combined with bleaching, as well as its potential mechanical effect on ceramic bonding to WSLs. METHODS: One hundred and fifty flat enamel surfaces of bovine incisors were prepared. Ninety specimens were deminerailized and randomly assigned to three groups(n = 30): post-bleaching resin infiltration (Bl-R), pre-bleaching resin infiltration (R-Bl), and only resin infiltration (R). Color, surface roughness and microhardness were assessed in immediate, thermocycling and pigmentation tests. The remaining sixty samples were randomly assigned to three groups (n = 20): control (Ctrl), bonding (Bo), pre-bonding resin infiltration (R-Bo). Shear bonding strength, failure mode, micro-leakage depth and interface morphology were evaluated after ceramic bonding. The Tukey test and analysis of variance (ANOVA) were used for statistical analysis. RESULTS: For the effect of resin infiltration and bleaching on WSLs, the R-Bl group showed the worst chromic masking ability, with the highest |ΔL|, |Δa|, |Δb|, and ΔE values after treatment. Compared with those in the Bl-R group, the R-Bl and R groups showed significant time-dependent staining, which is possibly attributed to their surface roughness. For the effect of resin infiltration on the adhesive properties of WSLs, resin infiltration reduced the staining penetration depth of WSLs from 2393.54 ± 1118.86 µm to 188.46 ± 89.96 µm (P < 0.05) while reducing WSLs porosity in SEM observation. CONCLUSIONS: Post-bleaching resin infiltration proved to be advantageous in the aesthetic treatment of WSLs. Resin infiltration did not compromise bonding strength but it did reduce microleakage and enhance marginal sealing. Overall, resin infiltration can effectively enhance the chromatic results of treated WSLs and prevent long-term bonding failure between ceramics and enamel. Based on these findings, the use of post-bleaching resin infiltration is recommended, and resin infiltration before ceramic bonding is deemed viable in clinical practice.

The effect of combined use of resin infiltration with different bioactive calcium phosphate-based approaches on enamel white spot lesions: An in vitro study.

OBJECTIVES: This in vitro study aimed to evaluate the effect of resin infiltration combined with casein phosphopeptide-amorphous calcium phosphate with fluoride (CPP-ACPF) or bioactive glass (BAG) on the stability of enamel white spot lesions (WSLs) treatment. MATERIALS AND METHODS: Eighty-four enamel blocks were prepared from the buccal surfaces of sound human premolars. All enamel blocks were placed in a demineralisation solution for 3 days to establish the artificial enamel WSLs. Enamel blocks with WSLs were randomly divided into three groups (n = 28 each group): RI/B: one-off resin infiltration followed by twice daily BAG treatment; RI/C: one-off resin infiltration followed by twice daily CPP-ACPF treatment; RI: one-off resin infiltration treatment only (as control) and subjected to pH cycling for 7 days. Surface morphology, elemental analysis, crystal characteristics, surface roughness and microhardness of enamel surfaces were investigated by scanning electron microscopy and energy-dispersive spectrometry observation, X-ray diffraction (XRD), atomic force microscope and Vickers' hardness testing, respectively. RESULTS: Mean values of the surface roughness (mean±standard deviation (nm)) were 24.52±5.07, 27.39±5.87 and 34.36±4.55 for groups RI/B, RI/C and RI respectively (p = 0.003). The calcium to phosphate ratios were 1.32±0.16, 1.22±0.26 and 0.69±0.24 for groups RI/B, RI/C and RI respectively (p < 0.001). XRD revealed apatite formation in all three groups. The mean enamel surface microhardness (kg/mm2) of the groups were 353.93±28.49, 339.00±27.32 and 330.38±22.55 for groups RI/B, RI/C and RI respectively (p = 0.216). CONCLUSIONS: Resin infiltration combined with CPP-ACPF or BAG remineralisation appears to improve the surface properties of WSLs. CLINICAL SIGNIFICANCE: The combination of resin infiltration and CPP-ACPF/BAG remineralisation may be a potential treatment for the management of the WSLs.

Comparison of aesthetic treatments for molar-incisor hypomineralisation: Systematic review and meta-analysis.

Introduction: Molar incisor hypomineralisation (MIH) is a developmental defect that predominantly targets the first permanent molars and incisors and consists of hypomineralisation of the enamel. A range of treatment options are available to improve aesthetics in this condition, including resin infiltration, bleaching techniques, restorations, microabrasion, and laser therapy. Objectives: This systematic review and meta-analysis aimed to analyse the effects of treatments on changes in enamel colour in teeth with MIH lesions and determine whether resin infiltration is the most aesthetic treatment. Material and Methods: A systematic literature search was conducted on PubMed, Web of Science, EBSCO, and Scopus databases until December 2022. The addressed PICO question was: "Is resin Infiltration the most effective treatment for restoring aesthetics in comparison to other treatments in patients with Molar incisor hypomineralisation?''. In addition, a meta-analysis was conducted with the selected studies to integrate the information using R.51 software (R Core Team (2013)). Results: In total, 678 articles were obtained from the initial search, of which 11 met the inclusion criteria. Seven studies concluded that resin infiltration was the most successful treatment method in the aesthetic rehabilitation of MIH lesions. Six of the eleven articles were included in the meta-analysis, which indicated that the treatments generated substantial colour changes. Conclusions: This systematic review and meta-analysis provided significant data suggesting that resin infiltration is the most effective treatment for achieving aesthetic improvements in MIH lesions, with the meta-analysis providing a significant result (p = 0.051) in favour of the hypothesis.

Management of permanent incisors affected by Molar-Incisor-Hypomineralisation (MIH) using resin infiltration: a pilot study.

PURPOSE: To compare the aesthetic improvement of Molar-Incisor-Hypomineralisation (MIH) opacities treated by applying Icon-Etch for three cycles with the opacities treated by Icon-Etch for once, in the course of resin infiltration technique. METHODS: Thirty incisors were sorted based on the colour of the opacities and then distributed according to the number of Icon-Etch cycles using a randomisation table into the groups: (1) White/Creamy one cycle, (2) White/Creamy three cycles, (3) Yellow/Brown one cycle, (4) Yellow/Brown three cycles. The primary outcomes of applying the resin infiltration to the opacities were compared amongst groups according to the parents' satisfaction, the amount of coverage, and the colour matching with the surrounding sound enamel. The stability of the results after 3 months was evaluated using a spectrophotometer. RESULTS: The colour of the opacity pre-treatment affected the outcomes significantly (p < 0.05), compared according to the method of application (p > 0.05) in terms of parents' satisfaction. Whilst the multiple applications for Icon-Etch cycles showed more coverage amount in White/Creamy opacities than the application ones (p < 0.05); in colour matching, there was no statistically significant difference between the two methods (p > 0.05). For yellow/brown opacities, some negative results occurred with the single Icon-Etch cycle. CONCLUSION: In MIH opacities, it is possible to rely on the resin infiltration as a minimally invasive method to achieve acceptable results, especially with multiple Icon-Etch cycles applications in the white/creamy opacities. The colour stability has not been affected by either the colour of the opacity or the number of cycles.

Visualization of etching cycles efficacy at the resin infiltration into artificial enamel caries: in-vitro study on bovine teeth.

This study evaluated the effect of repeated etching cycles on resin infiltrant penetration. Enamel samples measuring 4 × 4 × 3 mm3 were obtained from the facial aspect of 50 extracted bovine teeth. Samples were immersed in a demineralization solution for 21 days to create artificial lesions and divided into five equal groups (n = 10). A 15% hydrochloric acid gel was administered to each group. The acid etching application time differed between groups: Group 1; 2 min, Group 2; 2 × 2 min, Group 3; 3 × 2 min, Group 4; 4 × 2 min, and Group 5; 5 × 2 min. Resin infiltration was visualized using a confocal laser scanning microscopy. The lesion, penetration and erosion depth (µm) were calculated, and data were statistically analyzed. The highest penetration depth (75.59 ± 9.42 µm) was seen in Group 5, followed by Groups 4, 3, 2 and 1. However, there were no statistically significant differences in the penetration depths between Groups 4 and 5 and between Groups 2, 3 and 4 (p > 0.05). In conclusion, a repeated etching cycle enhanced resin infiltrant penetration.

Effects of repeated etching cycles using 15% hydrochloric acid on enamel loss and relative attenuation coefficient in resin infiltration.

BACKGROUND: Resin infiltration is used to mask enamel opacities and the recommended etching cycles are three. However, anecdotal evidence suggests that favorable esthetics outcomes can be obtained by increasing the etching cycles. AIM: To determine the incremental and total enamel loss when enamel surfaces are exposed to multiple etching cycles and to assess the relative attenuation coefficient after multiple etching cycles and resin infiltration treatment. METHODS: Ninety extracted sound human premolars teeth were divided into 9 groups (n = 10); with each consecutive group having one additional etching cycle up to 9 cycles. The teeth were scanned with optical coherence tomography and enamel loss and attenuation coefficient were measured with MATLAB software. Enamel loss (one-way ANOVA, p ≤ 0.05) and attenuation coefficient (two-way ANOVA, p ≤ 0.05) were statistically analyzed. RESULTS: There was a significant total enamel loss of more than 33% found at the 7th etching cycle and more. There was no statistically significant difference in the incremental mean depth of penetration of resin between various etching cycles (F(8, 134) = [2.016], one-way ANOVA, p = 0.185). CONCLUSION: This study recommends that etching should not be repeated more than seven cycles to prevent excessive enamel loss. Following eight etching cycles, resin infiltration penetration appears approximately equal to that of healthy enamel.

Management of Turner's Hypoplasia Using Resin Infiltration: A Case Report.

The causes of enamel discoloration can vary, leading to aesthetic concerns for patients. Injuries to primary teeth can lead to developmental issues in permanent successors, with enamel hypoplasia, commonly referred to as Turner's tooth. Diverse methods are available for addressing tooth discoloration. A case of an 11-year-old pediatric patient with a brown patch on the upper left central incisor was reported to the Pediatric Dentistry Department. A well-demarcated, yellowish-brown lesion was present on the labial surface of 21 and was diagnosed as Turner's hypoplasia. Resin infiltration was done using the Icon Smooth Surface (DMG America Company, Englewood, NJ) resin infiltration kit. The resin infiltration technique provides an approach to meet aesthetic requirements. In this case, the resin infiltration technique was successfully utilized to address the discoloration of the left maxillary central incisor, which was affected by Turner's hypoplasia.

Esthetic Effects and Color Stability of Resin Infiltration on Demineralized Enamel Lesions: A Systematic Review.

Aims and Objectives: The aim of this study was to systematically review the ability of resin infiltration to conceal demineralized enamel lesions to normal enamel translucency and to maintain color stability. Materials and Methods: A literature search of PubMed, MEDLINE, Web of Science, and Scopus databases and a manual search of articles from 2009 to 2021 for randomized controlled trials (RCTs) and clinical efficacy trials (nonrandomized) were performed. Methodological quality and risk of bias (RoB) of included papers was assessed using Cochrane Collaboration Risk of Bias Tool 2.0 for RCTs and ROBINS-I (Risk Of Bias In Non-randomized Studies of Interventions) tool for nonrandomized studies. Results: A total of 352 titles and abstracts were reviewed. Eight RCTs and three clinical efficiency studies were included in this review. The masking effects of the demineralized enamel lesion were reported immediately after resin infiltration, and the color stability of this material was up to 24 months, with no adverse effects noted. For RCTs, four studies were classified as "some concerns" and four were as "low RoB." For nonrandomized studies, all of the studies presented an overall moderate RoB. Conclusion: Resin infiltration achieves the best esthetic outcomes compared with microabrasion and remineralization therapy. Color stability was achieved with this material for up to 24 months and no adverse effects were noted. Factors contributing to the esthetic outcomes of the resin include the elimination of the hypermineralized surface layer, the homogeneity of the resin itself, and polishing after resin infiltration. Longitudinal follow-up and improved control of confounding variables should characterize future high-quality systematic reviews.

Effectiveness of resin infiltration (ICON) and microabrasion-remineralization technique with two remineralizing agents (Tooth Mousse and Toothmin) on permanent incisor hypoplasia - A randomized clinical trial.

Aims: The study aims to compare the effect of resin infiltration and microabrasion-remineralization (MAb-Re) with Tooth Mousse and Toothmin on permanent incisor hypoplasia. Materials and Methods: The study included children with permanent incisor hypoplasia above 9 years of age, 171 teeth divided randomly into four groups: Group A - ICON, Group B - MAb-Re using Tooth Mousse, Group C - MAb-Re using Toothmin, and Group D - control group. Process involved taking standardized photographs at T1 - before intervention, T2 - immediately after treatment, and T3 - 6-month follow-up. Color evaluation, area calculation, participant and expert opinion using a Likert scale, treatment time, and cost-effectiveness were all taken into consideration during the assessment. Statistical Analysis Used: Data were collected, entered into a computer, and analyzed; one-way ANOVA was used for intergroup assessment. Results: Overall color change was evident immediately after treatment in the ICON group compared to other groups (P < 0.05). However, no significant difference in color change was visible between the groups after 6 months. Reduction in hypoplastic area was seen in all the groups. The mean time was similar for all the groups. Toothmin was found to be the most cost-effective in comparison with the other two interventions. Conclusions: ICON proved to be more effective immediately after treatment for masking incisor hypoplasia. However, at 6-month follow-up interval, all the groups gave similar results.

Microhardness and surface roughness of resin infiltrated bleached enamel surface using atomic force microscopy: An in vitro study.

to evaluate the microhardness (VHN) and surface roughness (Ra) of human enamel surface treated with resin infiltration followed by in office bleaching and to study the effect of artificial saliva (AS) storage time on the VHN and Ra of resin infiltrated enamel. Materials and methods: Eighty enamel specimens were prepared from extracted human premolar teeth. Specimens were divided into two main groups (I and II) then, they were demineralized to create white spot lesions (WSLs). Group I was divided into A and B sub groups. Group A was treated with in office bleaching material while for group B, resin infiltration (Icon) was applied after 24 h storage in AS followed by bleaching. Group II was divided into (C and D). Group C was treated like group B. Specimens in group D were stored in AS for 14 d after treatment with Icon and before application of bleaching. Atomic force microscopy (AFM) Ra analysis and VHN calculation were done. Independent T Test was used to compare between groups at P < 0.05. Results: Group B demonstrated a significant increase in VHN compared with group A. Storage time in AS showed no significant difference on VHN or Ra between groups. Conclusion: Application of resin infiltration before bleaching significantly increased VHN and slightly improved Ra of WSLs compared with bleaching alone. Application of bleaching material after 24 h or 14 days of the application of resin infiltration did not have a significant effect or surface hardness or roughness of WSLs.

Effect of bleaching on color and surface topography of teeth with enamel caries treated with resin infiltration (ICON®) and remineralization (casein phosphopeptide-amorphous calcium phosphate).

Background: Dental bleaching is not recommended on teeth with enamel caries. Aim: The study aimed to assess the efficacy of in-office bleaching on demineralized enamel managed by resin infiltration (RI) as well as casein phosphopeptide-amorphous calcium phosphate (CPP-ACP). Methodology: Forty-eight sound enamel specimens were divided into four groups based on the surface treatment performed before in-office bleaching. Group I consisted of no caries and no treatment (NT); Group II had artificial caries (AC) and NT; Group III had AC treated with RI, and Group IV had AC remineralized with CPP-ACP. Pre- and postbleaching teeth color and surface topography were evaluated using spectrophotometer and scanning electron microscope (SEM), respectively. Statistical Analysis Used: One-way analysis of variance and Tukey's post hoc test were performed for inter-group comparisons. Results: The color change postbleaching was the least in Group IV; and this was significantly less than Group I (P < 0.05) and Group II (P < 0.001). The bleaching efficiency in Group III was not significantly different from the control group. In addition, the enamel topographic changes were less in the surface-treated group. Conclusion: RI can be considered a treatment modality for teeth with enamel caries requiring tooth whitening as the bleaching efficiency was like that of sound enamel.

Influence of the Resin System and Sand Type on the Infiltration of 3D-Printed Sand Tools.

Binder jetting is a highly productive additive manufacturing (AM) method for porous parts. Due to its cost-effectiveness, it is used for large components and quantities ranging from prototyping to series production. Post-processing steps like sintering or infiltration are common in several applications to achieve high density and strength. This work investigates how 3D-printed sand molds can be infiltrated with epoxy resins without vacuum assistance to produce high-strength molds for thermoforming applications. Specimens 3D-printed from different sand types are infiltrated with resins of different viscosity and analyzed for infiltration velocity and depth. The infiltration velocities corresponded well with the correlation described in Washburn's equation: The resins' viscosities and the saturation level were decisive. Amongst the investigated sand types commonly used in foundries, sand type GS19 was found most suitable for infiltration. However, the sand type proved to be a less relevant influencing factor than the resins' viscosities and quantities applied. Infiltration of topology-optimized 3D-printed sand tools up to a wall thickness of 20 mm for thermoforming applications was found to be feasible.