EVALUATION OF MINIMALLY INVASIVE PREPARATION OF CURVED MESIAL CANALS OF MANDIBULAR MOLARS - AN IN VITRO STUDY.

INTRODUCTION: Curved mesial roots can be challenging for different stages of endodontic treatment. Preparation aims to enlarge, clean, and shape the root canal system, and hundreds of systems are available to carry it out. Aiming to maintain pericervical dentin, minimally invasive preparation was proposed, and with it, instruments with lower tapers emerged. This study aimed to evaluate the increase in canal volume, the centering ability of the instruments, and root canal transportation of two different rotary systems with lower tapers. METHODS: Eighteen curved mesial roots of extracted mandibular molars were scanned by micro-CT at three moments: initial and after the two stages of endodontic preparation. The canals were prepared using TruNatomy (TN) and ProDesign Logic 2 (PDL2) instruments up to sizes 25.04 and 26.04, respectively, and after 36.03 and 35.05, respectively. The data was analyzed using parametric and non-parametric tests with a significance level of 5%. RESULTS: TN and PDL2 systems showed no difference regarding the increase in the volume of the canals with the first instruments, but after preparation with a diameter size of 35 or 36, there was a difference (p<0.01) between the systems in the cervical and middle thirds. CONCLUSION: Both systems shaped the mesial canals of mandibular molars while keeping low transportation and good centering ability in enlargements up to diameter size 35 or 36 with tapers of 3 or 5%.

Impact of Different Glidepath Techniques on the Overall Performance of WaveOne Gold in an Artificial S-Shape Canal.

OBJECTIVES: The article's aim is to test if rotary or reciprocating glide path influences the overall performance of WaveOne Gold in S-shaped canals. METHODS: Sixty endo training blocks with an S-shape curvature were divided into three groups based on the glide path method used: no glide path; glide path preparation with ProGlider; glide path preparation with WaveOne Gold Glider. All blocks were then shaped with WaveOne Gold Primary. The time for shaping, the incidence in reaching working length and the number of pecking motions were recorded. ANOVA with Turkey's test was used, and the p-value was set to 0.05. RESULTS: WaveOne Gold Primary reached working length faster in the control group when comparing total working times. No significant differences in the ability of the WaveOne Gold Primary to reach working length in all groups (p > 0.05). The mean number of pecking motions was higher in the control group compared to other groups. CONCLUSIONS: No significant differences in the time needed to achieve a glide path between Proglider and WaveOne Gold Glider. WaveOne Gold Primary can shape a double curved canal faster if a glide path is present but takes less time to reach length if it is the only file used. No difference in the ability to reach working length.

Endodontic management of a four-canal mandibular second premolar; using an operative microscope: A case report.

Key Clinical Message: Due to the complexities and variations of the root canal system's anatomy, mandibular premolars are among the most difficult teeth for endodontic treatment. The lack of clinician knowledge ultimately leads to treatment failure. Abstract: Mandibular premolars are the most complicated teeth for endodontic treatment because of the variations in root canal anatomy. On the other hand, missing root canals can subsequently lead to failure of endodontic treatment, which causes the patient to become symptomatic. Therefore, the clinician's knowledge of the different types of root canal anatomy and the skill of using new equipment for proper root canal treatment improve the outcome. This study reported the successful endodontic treatment of a mandibular second premolar with four root canals by using an operative microscope.

The effect of apical patency on postoperative pain following endodontic therapy: A systematic review and meta-analysis.

This systematic review and meta-analysis aimed to determine whether apical patency increases postoperative pain after endodontic therapy. This study explored the degree and incidence of postoperative pain during root canal therapy, as well as the number of required analgesic doses. We searched PubMed, Scopus, Embase, Web of Science, Cochrane Library, and gray literature from the date of database inception until May 2023. RevMan 5.4 software was used for data analysis. Twelve studies were considered eligible for meta-analysis. The mean pain scores on days 1 (mean difference [MD] = -1.69) and 2 (MD = -0.85) differed significantly between the apical patency and non-patency groups. The odds for pain after 24 h were significantly lower (OR 0.59) in the apical patency group than in the non-patency group. Furthermore, the mean number of required analgesic doses was not significantly different between the two groups. In conclusion, apical patency significantly alleviated postoperative pain (low-quality evidence) and reduced the incidence of pain (moderate evidence). However, high-quality randomized controlled trials are required to validate these findings.

Microscopic Evaluation of Dentinal Defects after Root Canal Preparation with Different Hand and Nickel-Titanium Files; An In Vitro Study.

Background: Effective endodontic instrumentation aims to remove microorganisms, debris, and tissue from the root canal while maintaining dentinal integrity. This study compares dentinal defect incidence following canal preparation with different hand files, nickel-titanium rotary files, and reciprocating files. Materials and Methods: Eighty single-rooted mandibular premolars with mature apices were collected. Four groups (n = 20) were established based on canal patency establishment, canal preparation technique, irrigation solution, and final irrigation. After root sectioning at 3 mm, 6 mm, and 9 mm from the apex, slices were examined under a stereomicroscope, and dentinal defects were recorded. A second examiner reviewed the images. Results: The results showed significant difference of P = 0.031 among Hand files vs. Rotary ProTaper files: In Hand files vs. Reciprocating WaveOne files significant difference was P = 0.048, and for rotary ProTaper files vs. Reciprocating WaveOne files: No significant difference (P = 0.643). Dentinal defect counts were similar at 3 mm, 6 mm, and 9 mm. Statistically significant variation was observed between hand files and rotary files, as well as hand files and reciprocating files. Conclusion: Both rotary and reciprocating files showed a statistically significant increase in dentinal defect incidence compared to hand files. However, clinical implications should be considered cautiously. Instrumentation technique selection should be based on clinical context, operator experience, and patient factors. Further clinical studies are needed for validation.

Compare the Centering Ability, Canal Transportation and Root Canal Area Increase of XP Endoshaper, Hyflex CM and K3 XF File System by using Cone Beam: An Original Research.

Objective: Using cone beam computed tomography (CBCT), this study compared three rotary file systems-XP Endoshaper, Hyflex CM, and K3 XF-for centering, canal transportation, and root canal area growth. Materials and Methods: The rotating file system randomly separated 60 removed human mandibular molars into three groups (n = 20). Manufacturer-recommended root canal instrumentation was done. Specialized software examined pre- and post-instrumentation CBCT scans. Centering ability was measured by canal transportation and root canal area expansion at different levels from the apex. Results: The Hyflex CM file system had the best centering and the least canal transit at all levels (P < 0.05). XP Endoshaper increased the root canal area the most (P < 0.05). The K3 XF file system had average centering and canal transfer results. Conclusion: The Hyflex CM system centered well, whereas the XP Endoshaper system increased the root canal area the most. The clinical context and therapeutic goals should determine the rotating file system.

The Effect of Lasers on the Healing of Periapical Lesion: A Systematic Review.

Introduction: Endodontic treatment of teeth with periapical lesions presents more clinical difficulty. Various lasers in several methods are used in endodontics, and most of them are utilized as an adjunctive protocol in order to reduce the bacterial load of the root canal system. Improved disinfection plays a crucial role in enhanced and accelerated healing of periapical lesions. This review aims to summarize studies assessing the effect of lasers on periapical lesion healing. Methods: PubMed/MEDLINE, Scopus, Embase, and Web of Science (ISI) online databases were searched, with no publication year or status restriction, for relevant articles on April 2023. Clinical studies evaluating the effect of laser application on the periapical lesion of patients using radiographic assessment were considered eligible for inclusion. Results: Eight studies were included after carefully screening the obtained articles, first by their title and abstract and then by their full texts. Diode (4), Er, Cr: YSGG (3), and Nd: YAG (1) lasers were used with output powers that varied from 0.75 to 2 watts. Photodynamic therapy was employed in two studies, and in other studies, the root canal system was directly irradiated. Irradiation of the root canal system was adjunctive to standard preparation in all studies. The healing of the teeth treated with lasers was not inferior to those conventionally treated. In all of the included studies, laser application outperformed the standard cleaning and shaping protocol; however, this improved or faster healing was not statistically significant in most studies. Conclusion: Lasers might expedite and improve the healing process of periapical lesions. Since lasers enhance the quality of cleaning of the root canal system, it is hard to point out the exact mechanism of it. Further investigations are needed to realize the effectiveness of this treatment modality and to discover the underlying biological concepts.

Micro-computed tomography analysis of shaping ability of nickel-titanium instruments activated by continuous rotation or adaptive motion.

This study assessed the ability of Twisted File Adaptive (TFA), TruNatomy (TRN) and VDW.Rotate (VR) instruments activated by continuous rotation (CR) and adaptive motion (AM) to shape curved root canals. Thirty mandibular molars with two separate mesial canals 20°-40° curved were collected and scanned using micro-computed tomography (µCT). The canals were then randomly assigned into six groups (n = 10): TRN, VR or TFA instruments activated by CR or AM. TRN groups 17.02, 20.04 and 26.04; VR groups 15.04, 20.05 and 25.06; TFA groups were shaped consecutively using 15K-file, 20.04 and 25.06. After they were shaped, the canals were scanned again. The volume of removed dentin, canal transportation and centring ratio were calculated µCT images. All data were analysed using the Kruskal-Wallis test or one-way analysis of variance (p < 0.05). With both kinematics, the TRN instrument removed the least amount of dentin, the VR-CR and the TFA-AM removed the most (p < 0.05). The transportation and centring ratios among all groups were similar (p > 0.05). The volume of dentin removed, the diameter or design features of the instruments and different kinematics did not affect the centring ratio and the amount of transportation and remained within safe limits. All three instruments activated by either kinematics were found to have similar effectiveness in shaping curved root canals.

Phase transformation behavior and mechanical properties of HyFlex EDM nickel-titanium endodontic rotary instrument: Evaluation at body temperature.

Background/purpose: Temperature-dependent phase compositional changes influence the mechanical properties of heat-treated nickel-titanium (NiTi) rotary instruments. This study evaluated the phase composition, bending properties, and cyclic fatigue resistance of HyFlex EDM NiTi rotary instruments against differently heat-treated and non-heat-treated NiTi instruments at body temperature (BT). Materials and methods: HyFlex EDM OneFile (EDM) instruments, heat-treated HyFlex CM (CM) and Twisted File (TF) instruments, and non-heat-treated K3 instruments (size #25/.08) were subjected to differential scanning calorimetry, and the martensitic, R-phase, and reverse transformation starting and finishing temperatures were determined. A cantilever bending test and a cyclic fatigue test were conducted at BT (37 °C ± 1.0 °C), and the bending load and number of cycles to failure (NCF) were recorded. Statistical analysis was performed using Kruskal-Wallis and Mann-Whitney U tests (α = 0.05). Results: TF and K3 had reverse transformation finishing temperatures lower than BT, while those for EDM and CM were higher than BT. The bending loads at a 0.5 mm deflection were in the order of EDM < TF < CM < K3 (P < 0.05), and those at a 2.0 mm deflection were EDM < CM and TF < K3 (P < 0.05). EDM had the highest NCF among the four instruments (P < 0.05). Conclusion: The EDM instrument had a reverse transformation finishing temperature higher than BT indicating its martensite/R-phase composition at BT. The EDM instrument had superior flexibility and greater resistance to cyclic fatigue than the CM, TF, and K3 instruments at BT.

40-Year Outcome of Old-School, Non-Surgical Endodontic Treatment: Practice-Based Retrospective Evaluation.

(1) Background: Non-surgical endodontic treatment has been shown to be clinically successful; however, clinical long-term data are scarce. This practice-based retrospective clinical investigation evaluated endodontic outcomes over 40 years and identified relevant clinical co-factors. (2) Methods: Two experienced dental practitioners in two different private dental practices treated 174 patients with 245 teeth from 1969 to 1993. After root canal obturation, either a new direct restoration (amalgam, resin composite, or glass-ionomer cement) or the re-cementation of a pre-existing prosthetic restoration or renewal of prosthetic restoration followed. Metal posts (operator A) or metal screws (operator B) were inserted when coronal substance loss was significant. The primary outcome (i.e., tooth survival) was achieved when the endodontically treated tooth was, in situ, painless and had full function at the end of the observation period. A secondary outcome, the impact of different prognostic factors on survival rate, was evaluated. (3) Results: The overall mean survival was 56.1% of all treated teeth after 40 years of clinical service, resulting in an annual failure rate of 1.1%. Most investigated clinical co-factors (jaw, tooth position, intracanal dressings, post/screw placement, and gender) showed no significant influence on survival. (4) Conclusions: Even with materials and techniques from the 1970s and 1980s, successful root canal treatment was achievable. Except for post-endodontic restorations, most of the evaluated factors had no significant influence on the clinical long-term survival of root canal-treated teeth.

Evaluation of apical transportation and centering ability of three single-file systems in severely curved canals using micro-computed tomography.

Background: This study aimed to compare the apical transportation and centering ability of One Curve, HyFlex EDM, and EdgeFile X1 in curved mesiobuccal and mesiolingual canals of mandibular first molars. Materials and Methods: In this in vitro experimental study, 60 mesiobuccal and mesiolingual canals of the mandibular first molars with a minimum length of 19 mm and 25°-40° curvature were randomly divided into three groups (n = 20) for root canal preparation with One Curve, HyFlex EDM, and EdgeFile X1. After access cavity preparation and confirming the glide path, the baseline micro-computed tomography (micro-CT) scans were obtained, and the root canals were instrumented with the respective systems according to the manufacturers' instructions. Apical transportation and centering ability were assessed at 1, 3, 5, and 7 mm from the apex by comparing pre- and postinstrumentation micro-CT scans. One-way ANOVA, independent t-test, and Duncan's post hoc test were used to statistically compare the groups, and data were analyzed by SPSS version 24 (alpha = 0.05). Results: The three groups were not significantly different regarding apical transportation at 5 and 7 mm from the apex (P > 0.05). At 1 mm level, One Curve caused significantly lower apical transportation; while, at 3 mm level, HyFlex EDM resulted in significantly higher apical transportation (P < 0.05). No significant difference was noted in the centering ability of the three groups at 1, 3, and 5 mm from the apex (P > 0.05). At 7 mm level, EdgeFile X1 showed significantly lower centering ability (P < 0.05). Conclusion: One Curve caused lower canal transportation in the apical third compared with EdgeFile and HyFlex EDM, but no significant difference was noted among the three in the coronal third of the roots.

Formation of dentinal microcracks after root canal preparation with four kinds of mechanical nickel-titanium files.

OBJECTIVES: This study aimed to compare the differences among four kinds of mechanical Ni-Ti files including T-Flex, Reciproc Blue (RB), ProTaper Gold (PTG), and ProTaper Universal (PTU) in dentinal microcrack generation after root canal preparation in vitro by using micro-computed tomography (micro-CT) analysis. METHODS: A total of 32 freshly extracted double-root-canal premolars with an angle not exceeding 10° were selected and established as root canal preparation models in vitro. Then, the specimens were randomly assigned to four experimental groups (n=8) according to the different Ni-Ti systems used for root canal preparation: group T-Flex, group RB, group PTG, and group PTU. The voxel size of the micro-CT was set at 17.18 µm. Pre- and post-operative cross-sectional images of roots (n=56 940) were scanned and analyzed to identify the presence of dentinal microcracks. The results of each group were expressed by the quantity and percentage of sectional images with microcracks. McNemar test was used to determine whether a significant difference existed in the existence of dentinal microcracks before and after instrumentation. The level of significance was set at P<0.05. RESULTS: Overall, 11.04% of the images presented dentinal defects (n=6 288). Dentinal microcracks were observed in 9.82%, 10.79%, 12.27%, and 11.25% of the post-instrumentation images from groups T-Flex, RB, PTG, and PTU, respectively. However, all these dentinal microcracks were already present in the corresponding pre-operative images. No new microcrack of premolars were generated after the root canal preparation utilizing the aforementioned systems. CONCLUSIONS: Denti-nal microcracks already existed in advance in extracted teeth before root canal preparation. Root canal preparation using the T-Flex, RB, PTG, and PTU systems did not induce the formation of new dentinal microcracks on the straight root canals of premolars.

Impact of root canal preparation using two single-file systems on the intra-radicular microbiome of teeth with primary apical periodontitis.

OBJECTIVES: This study aimed to describe the effects of two single-file systems on the diversity of the endodontic microbiome of teeth with primary asymptomatic apical periodontitis. MATERIALS AND METHODS: The root canals from single-rooted teeth with apical periodontitis were prepared using either the Reciproc Blue (RB) or the XP-endo Shaper (XPS) instrument system. The latter was followed by a supplementary step with the XP-endo Finisher (XPF) instrument. For irrigation, 5.25% sodium hypochlorite was used. Root canal samples were taken at the baseline (S1), after preparation (S2), and after the supplementary step (S3). DNA was extracted and subjected to high-throughput sequencing using the MiSeq Illumina platform. RESULTS: Samples from 10 teeth from the RB and 7 from the XPS group were subjected to DNA sequencing. Initial samples differed significantly from post-preparation samples in bacterial diversity, with no significant difference when comparing the two instrument systems. The most dominant phyla in S2 were Bacteroidetes, Proteobacteria, Firmicutes, Fusobacteria, and Actinobacteria. The same phyla were found to dominate baseline samples and samples taken after using XPF, but with differences in the ranking of the most dominant ones. At the genus level, the most dominant genera identified after RB instrumentation were Bacteroidaceae [G-1], Fusobacterium, and Staphylococcus, while the most dominant genera after XPS instrumentation were Fusobacterium and Porphyromonas. These genera were also dominant in the initial samples. CONCLUSIONS: Both treatment protocols had measurable effects on the root canal microbial diversity, with no significant differences between them. Most of the dominant taxa involved in the primary infection and probably in the aetiology of apical periodontitis were eliminated or substantially reduced. CLINICAL RELEVANCE: The most dominant taxa that persisted after instrumentation were Fusobacterium, Porphyromonas, Staphylococcus, and Bacteroidaceae [G-1].

In Vitro Evaluation of the Dynamic Cyclic Fatigue Resistance of a New TruNatomy Glider File after Different Cycles of Use.

INTRODUCTION: Determination of the glide path is recommended before using rotary instruments. This study aimed to evaluate the dynamic cyclic fatigue resistance of new and used glider rotary instruments in up to 6 root canals. METHODS: Seventy-two TruNatomy Glider files were used for the preparation of root canals of extracted lower molars, which were then submitted to the dynamic cyclic fatigue test carried out in a curved metallic artificial canal. The instruments were divided into 4 groups (n = 18): Control group, new instruments without any use in the root canal; Group 2U, instruments used in 2 mesial canals; Group 4U, instruments used in 4 mesial canals; Group 6U, instruments used in 6 mesial canals. The time to failure (TF) of the instrument was recorded, and the number of cycles to failure (NCF) was calculated. The data were submitted to 1-way analysis of variance and to the Games-Howell test for multiple comparisons, adopting a significance level of 5%. RESULTS: TF and NCF were significantly affected by the number of file uses. The Games-Howell test revealed that TF and NCF were significantly greater in the control group than in Group 4U. In Group 2U, TF and NCF were intermediate and not significantly different from the control group. Group 6U had significantly lower TF and NCF than all other groups. CONCLUSION: The TruNatomy Glider can be used as a glide path for up to 2 mesial canals of mandibular molars, whereas its use on 4 or 6 root canals is not suggested.

How Does Intentional Apical Foraminal Enlargement Affect the Foramen and Root Canal Morphology?

INTRODUCTION: This study assessed the effect of intentional foraminal enlargement on the foramen and the apical root canal morphology. METHOD: Sixty mesial roots of mandibular molars were scanned by micro-computed tomography. Their apical foramina were photographed with a stereomicroscope before and after preparation. Three groups were formed (n = 20) according to the working length (WL). G-1: foramen - 1 mm; G0: foramen; and G+1: foramen + 1 mm. Each group originated 2 subgroups (n = 10): G-1: Buchanan's patency (size 10 K-type file) and foraminal debridement (sizes 20, 25 and 30 K-type files); G0 and G+1: rotary foraminal enlargement (ProDesign S size 25/.08) or reciprocating foraminal enlargement (R25). The area, perimeter, transportation, and noninstrumented walls of the foramen were evaluated. The root canal transportation and the centering index of preparation at 1, 3 and 5 mm from the foramen were also assessed. Data were compared statistically (α = 5%). RESULTS: The instruments used at the foramen and 1 mm beyond promoted foraminal enlargement and transportation. Regarding NIW, there was no difference between mechanized foraminal enlargements performed at the foramen or 1 mm beyond, similar to the manual foraminal debridement group (P > .05). There was no difference in transportation and centralization at 1-, 3-, and 5-mm apical levels, regardless of the instrumentation systems. CONCLUSION: Mechanical preparation at the foramen, or 1 mm beyond, resulted in foraminal enlargement, transportation and were not able to touch all root canal walls that delimit the foramen.

Enhancing Coronal Adaptation of Root Canal Fillings with a Modified Single-Cone Obturation Technique: Two Case Reports.

The single-cone technique, also known as the hydraulic condensation technique, is widely employed in endodontics. However, the aforementioned method is presented with certain limitations; specifically concerning the coronal seal and the adaptation of the coronal third of a master gutta-percha (GP) with a round cross-section to the coronal dentinal walls of root canals with semi-round or oval cross-sections. Through two case reports, the current article introduces the coronal vertical condensation (CVC) technique; aiming to enhance GP adaptation to canal walls in similar scenarios. In fact, the coronal vertical condensation technique amalgamates the different aspects of warm vertical condensation and single-cone techniques. In CVC, following the placement of the master GP cone, an electrical heat carrier is inserted immediately a few millimeters apical from the canal orifice to remove the coronal portion of the master GP cone. Subsequently, a hand plugger is used to condense GP in the vertical dimension, and the coronal space is backfilled using melted GP. The implementation of CVC technique has demonstrated an improved coronal adaptation of GP with canal walls. The stated technique seems beneficial; especially in the obturation of severely curved canals or root canals with a final preparation shape of variable taper.

Substance P/calcitonin gene-related peptide and their receptors expression in human periodontal ligament after root canal preparation with five different systems.

AIM: The purpose of this study was to quantify the effect of five different root canal preparation instruments on Substance P (SP), Calcitonin gene-related peptide (CGRP) and their receptors expression in healthy human periodontal ligament. METHODOLOGY: STROBE guidelines were used to design a study using 60 periodontal ligament samples obtained from healthy lower premolars where extraction was indicated for orthodontic reasons. Prior to extraction 40 of these premolars were equally divided into four groups and root canals were prepared using different systems: Mtwo, Reciproc Blue, HyFlex EDM and Plex-V. Ten premolars were prepared with hand files and served as a positive control group. The remaining 10 premolars where extracted without treatment and served as a negative control group. All periodontal ligament samples were processed to measure the expression of SP, CGRP and their receptors by radioimmunoassay. Kruskal-Wallis and Duncan tests were performed to determine statistically significant differences between the groups for each variable. RESULTS: Greater expression of all the peptides measured were found in the hand-file preparation group, followed by the Reciproc Blue, Mtwo, HyFlex EDM and Plex-V groups. The lower SP, CGRP and their receptors values were for the intact teeth control group. Kruskal-Wallis test showed statistically significant differences amongst groups (p < .001). Dunn post-hoc tests showed statistically significant differences in SP, CGRP and their receptors expression between the intact teeth and the hand-file and Reciproc Blue groups. Hand-file group showed significant differences with the other groups, except with Reciproc Blue, where no differences were observed in any of the peptides measured. Finally, no differences were observed between Plex-V and HyFlex in any of the peptides measured. CONCLUSIONS: Root canal preparation with hand files and Reciproc Blue generates the highest expression of SP, CGRP, NK1 and CGRP1R in human periodontal ligament, whilst Plex-V and HyFlex maintain the basal expression of neuropeptides and their receptors. Mtwo showed intermediate results between Reciproc Blue and HyFlex.

Photodynamic therapy in the root canal treatment of primary teeth: A systematic review of clinical trials.

BACKGROUND: Dental caries is the most common oral disease worldwide, and it is estimated to affect 2.3 billion people, with at least 530 million of them being schoolchildren with decayed primary teeth. This condition can rapidly evolve into irreversible pulp inflammation and pulp necrosis and thus requiring endodontic intervention. Photodynamic therapy (PDT) is a supplementary method to conventional pulpectomy and is used to improve the protocol used for disinfection. AIM: The main objective of this study was to evaluate through a systematic review the efficacy of supplementary PDT on the pulpectomy of primary teeth. This review was registered a priori on the PROSPERO database (CRD42022310581). DESIGN: Two independent and blinded reviewers carried out a comprehensive search in five databases: PubMed, Cochrane, Scopus, Embase, and Web of Science. Eligible studies were randomized and nonrandomized clinical trials that evaluated in vivo microbiological load or clinical outcomes after using supplementary PDT in infected primary teeth. RESULTS: After the selection process, four studies met the inclusion criteria and were included in this study. Data regarding the sample characteristics and PDT protocols were retrieved. All included trials used phenothiazinium salts as photosensitizer agents. Only one study observed a significant difference in the in vivo microbiological load reduction outcome when performing PDT on primary teeth. The remaining studies all discussed the possible benefits of this intervention; however, none observed a significant difference in this outcome. CONCLUSION: In this systematic review, moderate-to-low certainty of the available evidence was observed, and thus, no significant conclusions can be drawn from the findings.

Can ultrasonography be used to determine working length in endodontic treatment? An in vitro study.

This study was conducted to evaluate efficacy of ultrasonography (USG) in determining working length in in-vitro conditions. Twenty five access cavities of maxillary incisor teeth were opened and actual working lengths (AWL) were measured with dental operating microscope. The working length were then measured with an electronic apex locator and USG. USG and apex locator measurements were statistically analyzed using one sample t-test and compared with AWL. The mean AWL measurment was 20.68 mm. USG measured the working length slightly longer (21.09 mm) than the measurements of apex locator (20.64 mm). Statistical analysis showed that the USG method provided similar measurements to electronic apex locators and with no statistical difference with actual working length (P < .05). USG emerges as a promising method for working length measurement that allows simultaneous visualization of root tip anatomy in cases where electronic apex locators may be insufficient and there is buccal cortical bone loss.

Effectiveness of different supplementary protocols for remaining filling material removal in endodontic reintervention: an integrative review.

The aim of this study was to perform an integrative review to identify the most effective supplementary protocols used after filling material (FM) removal and root canal reinstrumentation, during endodontic reintervention. The literature search was performed on the electronic databases PubMed and Latin American and Caribbean Health Sciences Literature (LILACS), using a combination of specific scientific descriptors. Selection criteria accepted articles published in English, Spanish and Portuguese languages, up to August 2021, involving in vitro and ex vivo studies. After applying the eligibility criteria, 46 articles were included for qualitative analysis. The tool for qualitative analysis of quasi-experimental studies of the Joanna Briggs Institute was used to determine the risk of bias of the included articles. The selected articles provided important data regarding the following supplementary protocols: sonic and ultrasonic activation of the irrigating solution; the use of ultrasonic inserts, XP-endo system instruments, and photon-induced photoacoustic streaming for mechanical debridement; and new devices as GentleWave system, and the self-adjusting file. Overall, all supplementary protocols demonstrated efficacy in removing the remaining FM. The implementation of various supplementary protocols can effectively remove the remaining FM from the root canal walls, although complete removal is not always achieved. However, it was not possible to determine the most effective protocol. Conversely, their association can enhance remaining FM removal. Remaining FM attached to root canal walls hinders proper chemical-mechanical preparation during endodontic reintervention. Supplementary protocols optimize the remaining FM removal, enhancing cleaning and disinfection of root canal.