The Assessment of C-shaped Canal Prevalence in Mandibular Second Molars Using Endodontic Microscopy and Cone Beam Computed Tomography: An In Vivo Investigation.

Background Understanding root canal anatomy variations, particularly C-shaped canals, is crucial for successful endodontic treatment. This study used clinical and radiographic methods to assess the prevalence and characteristics of C-shaped canals in mandibular second molars in Western Maharashtra. Materials and methods This prospective study was conducted in the western region of Maharashtra, India. The samples included patients requiring endodontic treatment for mandibular second molars. Clinical evaluation was conducted using a surgical endodontic microscope and cone beam computed tomography (CBCT) imaging. Inclusion and exclusion criteria ensured the selection of a focused and homogeneous sample. Data analysis included assessment of unilateral/bilateral occurrence, canal distribution, and cross-sectional characteristics. Results Out of 200 mandibular second molars, 7.5% exhibited C-shaped root canals, with no significant gender differences. Canal distribution varied across coronal, middle, and apical levels, with prevalent configurations being C1, C2, C3, and C4. No significant differences were observed in canal distribution based on root levels. No significant gender differences were found in the presence of grooves on the root surfaces. Conclusion This study provides valuable insights into the prevalence and characteristics of C-shaped canals in mandibular second molars in Western Maharashtra. Further research into histological and genetic aspects can enhance our understanding, leading to improved treatment strategies for complex root canal anatomy variations.

Root anatomy and canal configuration of human permanent maxillary third molar - systematic review.

Knowledge of the root canals configuration is essential for the success of endodontic treatment. The main aim of the systematic review is to determine the number of roots and the number of root canals in maxillary third molars, in addition, where possible, to determine the Vertucci classification. This systematic review was conducted following the Preferred Reporting Items for Systematic Reviews and Meta-Analysis (PRISMA) statement guidelines. The study protocol was registered and approved on the International Prospective Register of Systematic Reviews PROSPERO (Reg. No: CRD42022366444) before the start of the study. Twelve studies were included in the analysis, differing in sample origin and methodology. The combined studies were analyzed based on the number of roots, number of canals, and root canal configurations, and the findings were compared with those of other international studies. Analyzing the available research results regarding the root anatomy and canal configuration of the third maxillary molar, the most commonly maxillary third molars had 3 roots (59.00%). Single-rooted teeth (24.20%) or double-rooted teeth (13.80%) were less common. In addition, it was observed that maxillary third molars typically possessed three root canals (47.28%) and the MB (mesiobuccal), DB (distobuccal), and P (palatal) canals most often showed Vertucci Type I (59.53%, 95.83% and 98.61%, respectively) in three-rooted form. Due to the small number of available studies, it is necessary to conduct further analyses taking into account demographic and ethnic differences that may affect the anatomical and morphological structure of the teeth.

Reinforcement of the Maxillary First Premolar With Bayonet-Shaped Radicular Anatomy: A Challenging Case.

This is a unique case of a single-rooted maxillary premolar with two separate canals in bayonet or S-shaped radicular anatomy undergoing post-endodontic reinforcement prior to crown placement. Bayonet-shaped canals present challenges in canal negotiation, cleaning, shaping, and obturation. The complexity of these canals heightens the risk of accidental file breakage and other iatrogenic errors, posing significant challenges. Post-endodontic restoration in S-shaped canals with double curvature poses challenges in precise placement and material adaptation. A novel technique was implicated to preserve the functionality and structural aesthetics of a decayed maxillary first premolar tooth.

Endodontic management of a maxillary first molar with three roots and six root canals.

Variations in the root canal anatomy of a maxillary first molar are often challenging to diagnose and treat; thus, clinicians must have a thorough knowledge of the same. This case report highlights the successful nonsurgical endodontic management of a maxillary first molar with an unusual morphology of three roots and six root canals. A total of six root canals (mesiobuccal [MB] 1, MB2, MB3, distobuccal [DB] 1, DB2, and palatal) were detected after initiating root canal therapy and access cavity preparation. Conventional root canal treatment was completed, and postoperative cone-beam computed tomography scanning was done to verify the total number of canals and ensure the adequacy of root canal fillings. Managing such cases with rare variations in the root canal systems could be arduous and thus, clinicians should be well-versed in the methods to identify and manage such complexities to facilitate the successful outcomes of endodontic treatment.

Non-surgical Endodontic Management of Multiple Mishaps: A Case Report.

The description of non-surgical retreatment is to eliminate all previous filling materials and correct any mishaps. An adequate understanding of root and canal morphology is a fundamental requirement for obtaining a favorable outcome in endodontic treatment. The endodontic diagnosis was previously treated through therapy with symptomatic apical periodontitis. Treatment was performed under a dental operative microscope. Gates Glidden (GG) drills size 2 and 3 were used to remove the coronal part of gutta-percha for all canals. A braiding technique with a Hedstrom file size 15 without a solvent was used to remove gutta-percha and separate the file together for the palatal canal whereas the mesiobuccal canal was retreated by ProTaper Retreatment Kit. Proper understanding of root canal morphology and using an endodontic armamentarium could reduce endodontic mishaps. This case report described the successful management of overextended gutta-percha, a separated file, and a missed canal.

Radiographic Evaluation Factors That Influence the Decision of the Tooth Extraction Method.

INTRODUCTION: A simple tooth extraction method usually involves using elevators and forceps to remove the tooth easily. In contrast, a surgical extraction method requires utilizing a straight handpiece to facilitate the tooth extraction, either removing bone or sectioning the tooth into pieces. OBJECTIVE: In this research, we aim to diagnose a tooth radiographically before extraction and determine certain factors to observe which extraction method might be more feasible, either simple or surgical. METHODOLOGY: This study followed a retrospective cross-sectional study design. The x-ray radiographs (periapical (PA) or panoramic) were collected from the R4 system in the university dental hospital for data collection. Different radiographic influencing factors were measured, such as bone density, bone level, endodontic involvement (RCT/post and core), crowned or remaining root, and root morphology. Statistical associations were performed using SPSS (IBM Corp., Armonk, NY) with a one-way ANOVA test. RESULTS: There were 62 cases with 47 simple and 15 surgical extractions. There was a non-significant (p>0.05) association between the measured factors and the extraction method, either simple or surgical tooth extraction. Although bone density measurements showed a slight tendency toward PA lesions and simple tooth extraction. CONCLUSION: There was no significant association between the factors and extraction methods. Future research is required to determine whether or not preoperative radiographic evaluation can influence the decision for the tooth extraction method.

Incidence of Middle Mesial Canals in Mandibular Molars during Root Canal Treatment and Nonsurgical Retreatment.

INTRODUCTION: Large-scale clinical studies on the incidence of middle mesial canals (MMCs) in nonsurgical root canal treatment (RCT) and retreatment of mandibular molars are lacking. The primary aim of this observational study was to determine the incidence of MMCs in mandibular first and second molars that received RCT or nonsurgical retreatment (NSRetx). The secondary aim was to determine factors associated with incidence of MMCs. METHODS: Included were 3018 mandibular molars that received RCT (n = 1624) or NSRetx (n = 1394) by 3 endodontists in a private practice. Demographic and procedural data were collected. Bivariate and multivariable (Poisson regression model) analyses were performed. RESULTS: Incidence of MMCs was 8.8% (n = 267). Although the bivariate analysis showed that NSRetx was significantly associated with incidence of MMCs, this association did not reach the threshold for statistical significance after controlling for all covariates (P = .07). Multivariable analysis on the entire cohort showed that incidence of MMCs was significantly associated with younger age (risk ratio [RR] = 1.62; 95% confidence interval [CI], 1.28-2.06), male gender (RR = 1.48; 95% CI, 1.18-1.85), preoperative cone-beam computed tomography (CBCT) (RR = 1.48; 95% CI, 1.17-1.89), and first molar (RR = 2.30; 95% CI:1.74-3.05). Subgroup multivariable analyses revealed that incidence of MMCs was associated with male gender only in the RCT group (RR = 2.26; 95% CI, 1.55-3.30) but not in the NSRetx group (RR = 1.11; 95% CI, 0.82, 1.50); and with preoperative CBCT only in the NSRetx group (RR = 1.78; 95% CI, 1.28, 2.50) but not in the RCT group (RR = 1.10; 95% CI, 0.71, 1.69). Associations with younger age and first molar remained unchanged. CONCLUSIONS: Overall incidence of MMCs was 8.8%. Incidence of MMCs was significantly higher in younger patients and in mandibular first molars but was not associated with the type of treatment.

Predictor factors of 1-rooted mandibular second molars on complicated root and canal anatomies of other mandibular teeth.

Objectives: This study aimed to determine the effects of 1-rooted mandibular second molar (MnSM) teeth on root canal anatomy complexities of the mandibular central incisor (MnCI), mandibular lateral incisor (MnLI), mandibular canine (MnCn), mandibular first premolar (MnFP), mandibular second premolar (MnSP), and mandibular first molar (MnFM) teeth. Materials and Methods: Cone-beam computed tomography images of 600 patients with full lower dentition were examined. Individuals with 1-rooted MnSMs were determined, and the complexity of root canal anatomy of other teeth was compared with individuals without 1-rooted MnSMs (Group-1; subjects with at least one 1-rooted MnSM, Group-2; subjects with more than a single root in both MnSMs). A second canal in MnCIs, MnLIs, MnCns, MnFPs, and MnSPs indicated a complicated root canal. The presence of a third root in MnFMs was recorded as complicated. Results: The prevalence of 1-rooted MnSMs was 12.2%, with the C-shaped root type being the most prevalent (9%). There were fewer complicated root canals in MnCIs (p = 0.02), MnLIs (p < 0.001), and MnFPs (p < 0.001) in Group 1. The other teeth showed no difference between the groups (p > 0.05). According to logistic regression analysis, 1-rooted right MnSMs had a negative effect on having complex canal systems of MnLIs and MnFPs. Left MnSMs were explanatory variables on left MnLIs and both MnFPs. Conclusions: In individuals with single-rooted MnSMs, a less complicated root canal system was observed in all teeth except the MnFMs.

Diagnostic value of cone beam computed tomography for root canal morphology assessment - a micro-CT based comparison.

OBJECTIVES: The aim of this study was to assess cone beam computed tomography (CBCT) as a root canal anatomy diagnostic tool by comparison with micro-CT gold-standard. MATERIALS AND METHODS: 216 two-rooted mandibular molars were first scanned in a CBCT device (200 µm voxel size) and posteriorly in a micro-CT scanner (19.61 µm). The volumes were sequentially screened to classify main root canal anatomy according to Vertucci classification, and for the presence of lateral canals and apical deltas, in both mesial and distal roots. RESULTS: Both methods revealed a higher prevalence of Vertucci Type II and IV in the mesial root, and Vertucci Type I in the distal root. The percentage of agreement for main root canal anatomy classification between CBCT and micro-CT scores was high (85.2%). CONCLUSION: Sensibility to detect both lateral canals and apical deltas with CBCT was low. These results attest to the fact that minor anatomical changes might be difficult to identify with CBCT imaging, hampering its diagnostic value.

Penetration of Calcium Silicate and Epoxy Resin Sealers Into the Lateral Canals.

OBJECTIVES: The aim of this research was to compare the penetration ability of calcium silicate-based sealers (iRoot SP and TotalFill BC HiFlow) and an epoxy resin-based sealer (AH Plus) into the lateral canals using the single-cone (SC) or continuous wave compaction (CW) obturation techniques. METHODS: Ninety single-rooted human teeth received canal instrumentation and diaphanisation before artificial lateral canals were created at 3 different root levels. The specimens were randomly allocated into 6 groups based on the combination of obturation technique and sealer used. Radiographic and photographic measurements evaluated the percentage of sealer penetration. Statistical analysis was performed to compare the penetration ability amongst different types of sealers, obturation methods, and root levels. RESULTS: Although TotalFill BC HiFlow sealer combined with the CW technique demonstrated greater sealer penetration at the coronal level (P < .05), the overall penetration ability of iRoot SP, TotalFill BC HiFlow, and AH Plus was not significantly different. The deepest sealer penetration was observed at the apical root level. CONCLUSIONS: All sealers showed similar penetration abilities into the lateral canals using the SC or CW techniques in vitro. Calcium silicate-based sealers have comparable penetration ability into lateral canals compared to epoxy resin-based sealers using SC or CW obturation techniques.

Performance of obturation techniques in anatomical irregularities located at different thirds of the root canal system

Abstract This study aimed to compare the quality of root canal obturation (ratio of area occupied by gutta-percha (G), sealer (S), and presence of voids (V)) in different anatomical irregularities (intercanal communications, lateral irregularities, and accessory canals) located at different thirds of the root canal system of mandibular molar replicas. Sixty-seven 3D printed replicas of an accessed mandibular molar were prepared using ProGlider and ProTaper Gold rotatory systems. Three specimens were randomly selected to be used as controls and did not receive further treatment. The rest were randomly distributed in 4 experimental groups to be obturated using either cold lateral compaction (LC), continuous wave of condensation (CW), and core-carrier obturation (ThermafilPlus (TH) or GuttaCore (GC)) (n=16 per group). AHPlus® sealer was used in all groups. The three controls and a specimen from each experimental group were scanned using micro-computed tomography. The rest of the replicas were sectioned at the sites of anatomical irregularities and examined at 30× magnification. The G, S, and V ratios were calculated dividing the area occupied with each element by the total root canal area and then compared among groups using the Kruskal-Wallis test. Voids were present in all obturation techniques with ratios from 0.01 to 0.15. CW obtained a significantly higher G ratio in the irregularity located in the coronal third (0.882) than LC (0.681), TH (0.773), and GC (0.801) (p<0.05). TH and GC achieved significantly higher G ratios in those located in the apical third (p<0.05). The worst quality of obturation was observed in the loop accessory canal with all obturation techniques. Whitin the limitations of this study, it can be concluded that CW and core-carrier obturation are respectively the most effective techniques for obturating anatomical irregularities located in the coronal and the apical third.

A Cone Beam Computed Tomography-Based Investigation of the Frequency and Pattern of Radix Entomolaris in the Saudi Arabian Population.

Background and Objectives: An understanding of the anatomical complexity of teeth is a significant factor for a successful endodontic treatment outcome. The aim of this study was to explore the frequency and pattern of distribution of radix entomolaris (RE) in mandibular first molars (MFMs) of a Saudi Arabian subpopulation using CBCT scans. Materials and Methods: This study was conducted at dental clinics of Qassim University from February to May 2023 by evaluating CBCT scans that were previously obtained for diagnostic purposes. Scans of Saudi national patients with bilaterally present MFMs and fully formed root apices were included. Conversely, scans with one/or two missing MFMs, MFMs with incomplete root apices, full- or partial-coverage prosthesis, endodontic treatment, and associated radicular resorption were excluded from study. A total of 303 CBCT scans with 606 bilateral MFMs were analyzed by two calibrated evaluators for the presence of, and type according to Song's typolgy of RE. The data were analyzed using SPPS-24. The descriptive variables were documented as frequencies and percentages. The chi-square test was used to determine the association between the prevalence of RE with the gender, jaw side and age group. Both inter-rater and intra-rater agreements were estimated for detecting and classifying RE using Cohen's kappa test. Results: The sample had 63.7% males and 36.3% females. The prevalence of RE was 6.6%, with Song's type III (57.5%) as the most common variant. Absolute agreement was noted between the raters about the presence of RE and very strong agreement was noted for the classification of the RE. Conclusions: RE is an uncommon finding among the mandibular first molars of the Saudi population without any gender and quadrant predilection. The clinicians' knowledge of the presence and Song's type of RE may contribute towards the enhancement of endodontic treatment outcomes.

Implications of root, pulp chamber, and canal anatomy on pulpotomy and revitalization procedures.

OBJECTIVES: This review aims to discuss the implications of anatomy of the root, pulp chamber, and canals on pulpotomy and revitalization procedures (RPs) as treatment alternatives to root canal treatment procedures. METHODS: This narrative review was undertaken to address two main questions - why remove vital pulp tissue in teeth with complex canal anatomy when it can be preserved? And why replace the necrotic pulp in teeth with mature roots with a synthetic material when we can revitalize? This review also aims to discuss anatomical challenges with pulpotomy and revitalization procedures. RESULTS: Maintaining the vitality of the pulp via partial or full pulpotomy procedures avoids the multiple potential challenges faced by clinicians during root canal treatment. However, carrying out pulpotomy procedures requires a meticulous understanding of the pulp chamber anatomy, which varies from tooth to tooth. Literature shows an increased interest in the application of RPs in teeth with mature roots; however, to date, the relation between the complexity of the root canal system and outcomes of RPs in necrotic multi-rooted teeth with mature roots is unclear and requires further robust comparative research and long-term follow-up. CONCLUSIONS: Whenever indicated, pulpotomy procedures are viable treatment options for vital teeth with mature roots; however, comparative, adequately powered studies with long-term follow-up are needed as a priority in this area. RPs show promising outcomes for necrotic teeth with mature roots that warrant more evidence in different tooth types with long-term follow-ups.  CLINICAL RELEVANCE: Clinicians should be aware of the pulp chamber anatomy, which is subject to morphological changes by age or as a defensive mechanism against microbial irritation, before practicing partial and full pulpotomy procedures. RP is a promising treatment option for teeth with immature roots, but more evidence is needed for its applications in teeth with mature roots. A universal consensus and considerably more robust evidence are needed for the standardization of RPs in teeth with mature roots.

Critical analysis of a new system to classify root and canal morphology - A systematic review.

A novel system to classify root and canal morphology was recently introduced (Ahmed et al. 2017). This systematic review aimed to answer the following research question: Does the Ahmed et al. system provide a more accurate and practical classification of root and canal anatomy compared to other classifications? A literature search was conducted in Google Scholar, Scopus and Wiley Online Library to identify the citation counts for the article entitled 'A new system for classifying root and root canal morphology; doi.org/10.1111/iej.12685'. After removal of duplicates and unrelated articles, 15 studies were included and analysed. All studies compared the Ahmed et al. system with the Vertucci classification. Results revealed that both systems were able to classify simple canal configurations in single-rooted anterior and premolar teeth, disto-buccal and palatal roots of maxillary molars. However, the Ahmed et al. system provided more accurate and comprehensive categorisations of single-rooted teeth with complex canal anatomy, multi-rooted maxillary and mandibular premolars and the mesio-buccal root of maxillary molars. Further evidence on the utility of the Ahmed et al. system is required using other diagnostic devices especially in molars.

Assessment of the Prevalence of Radix Entomolaris and Distolingual Canal in Mandibular First Molars in 15 Countries: A Multinational Cross-sectional Study with Meta-analysis.

AIM: The aim of this study was two-folded: i) to assess the prevalence of Distolingual Canal (DLC) and Radix Entomolaris (RE) in Mandibular First Molars (M1Ms), using Cone Beam Computed Tomography (CBCT) images and ii) to assess the impact of sociodemographic factors on the prevalence of these conditions worldwide. METHODS: CBCT images were scanned retrospectively and the ones including bilateral M1Ms were included in the study. The evaluation was performed by 1 researcher in each country, trained with CBCT technology. A written and video instruction program explaining the protocol to be followed step-by-step was provided to all observers to calibrate them. The CBCT imaging screening procedure consisted of evaluating axial sections from coronal to apical. The presence of DLC and RE in M1Ms (yes/no) was identified and recorded. RESULTS: Six thousand three hundred four CBCTs, representing 12,608 M1Ms, were evaluated. A significant difference was found between countries regarding the prevalence of both RE and DLC (P < .05). The prevalence of DLC ranged from 3% to 50%, and the overall prevalence was 22% (95% CI: 15%-29%). RE prevalence ranged from 0% to 12%, and the overall prevalence was 3% (95% CI: 2%-5%). There were no significant differences between left and right M1Ms or between genders for either DLC or RE (P > .05). CONCLUSION: The overall prevalence of RE and DLC in M1Ms was 3% and 22%. Additionally, both RE and DLC showed substantial bilaterally. These variations should be considered by endodontic clinicians during endodontic procedures in order to avoid potential complications.

The Global Prevalence of Middle Mesial Canal in Mandibular First and Second Molars Assessed by Cone Beam Computed Tomography: A Systematic Review and Meta-Analysis.

INTRODUCTION: This meta-analysis sought to identify the in vivo prevalence and influencing factors of middle mesial canal (MMC) in mandibular first and second molars based on cone-beam computed tomography (CBCT) scans. METHODS: MEDLINE/PubMed, Web of Science, Scopus, SciELO, Google Scholar databases/search engines were searched in period between 15th and 21st November 2022, to retrieve the in vivo CBCT-based studies that assessed the prevalence of MMC in mandibular first and/or second molars. The studies were strictly assessed using predefined inclusion and exclusion criteria for relevancy and eligibility through screening the title and abstract, and then assessed through reading the full texts using the same criteria. Subsequently, the fulfilled studies were assessed qualitatively using the Newcastle-Ottawa Quality Assessment Scale, and quantitatively using meta-analysis to calculate the pooled prevalence rates of MMC. The publication bias was assessed using funnel plot and Egger's test. RESULTS: Out of 1122 studies, 33 studies comprised of 13,349 and 7624 mandibular first and second molars, respectively, were eligible for inclusion. Twenty studies scored high quality, while 13 scored moderate quality. The global prevalence of MMC in the first molar was 4.4% (95% CI = 0.035-0.053, P < .001), significantly higher than that of the second molar which was 1.3% (95%, CI = 0.008-0.018, P < .001). Gender, molar side, and age were not influencing factors of MMC prevalence. CONCLUSIONS: The prevalence of MMC is not uncommon, being higher in the mandibular first molar compared to the mandibular second molar. The prevalence of MMC is not influenced by age, molar's side, and gender.

Assessment of the coronal root canal morphology of permanent maxillary first molars using digital 3D-reconstruction technology based on micro-computed tomography data.

Background: The design of minimally invasive access has become a hotspot. This study aimed to evaluate the coronal root canal morphology of permanent maxillary first molars to facilitate the design of endodontic access cavities for minimally invasive linear access. Materials and methods: A selection of 91 permanent maxillary first molars was evaluated. Three-dimensional tooth models were reconstructed using micro-computed tomography data. Root canal prevalence and coronal root canal landmarks were recorded. The positional coordinates of landmarks in the horizontal plane and the angles and directions of coronal root canal curvature in the horizontal and axial planes were also assessed. Results: The detection rates of the mesiobuccal (MB), distobuccal (DB), and palatal (P) canals were 100%, whereas that of the second mesiobuccal (MB2) canals was 68.1%. All landmarks were located near the central fossa. In the axial plane, the average angles of coronal root canal curvature were DB (27.05°) > MB (25.43°) > P (20.71°) in teeth with three canals, and MB2 (33.20°) > MB (29.61°) > DB (28.40°) > P (23.69°) in teeth with four canals. In the horizontal plane, the average angles were P (78.15°) > DB (42.34°) > MB (32.41°) in teeth with three canals, and P (81.26°) > DB (43.44°) > MB (41.22°) > MB2 (9.41°) in teeth with four canals. Conclusion: In maxillary first molars, coronal root canals tend to converge towards the occlusal surface. The results of this study could be applied to improve the precision of endodontic access cavity designs of minimally invasive access.

Dentine thickness in maxillary fused molars depends on the fusion type: An ex vivo micro-computed tomography study.

AIM: The present study aimed to determine and compare the dentine thickness around the root canals of maxillary molars with fusion using micro-computed tomography (micro-CT). METHODOLOGY: A total of 120 fused maxillary molars having more than a single canal with distinct canal orifices near the cementoenamel junction were selected from a pool of extracted maxillary molars, which were scanned on a micro-CT device (SkyScan 1172, Bruker-microCT). The minimum dentine thickness around the root canals in furcal direction was measured using CTAn software (v.1.18.8 Bruker-microCT) at each millimetre. The specimens were grouped according to their fusion type, and dentine thickness around the canals was compared. The data were statistically analysed using anova and post hoc Tukey-Kramer tests following an assessment of the normality of their distribution with the Kolmogorov-Smirnov test (p < .05). RESULTS: Dentine thickness showed a statistically significant decrease at 2 mm apical to the orifice level irrespective of fusion type. The minimum dentine thickness values were detected around the second mesiobuccal canal as 0.30 mm at 6 mm below orifice. Dentine thickness around the mesiobuccal canal was significantly greater in fusion type 1 than those of types 2 and 3 (p < .05), while those of distobuccal and palatal canals were significantly thinner in type 3 fusion compared with type 1 or 6 (pDentine thickness showed a statistically significant decrease at 2 mm apical to the orifice level  irrespective of fusion type. The minimum dentine thickness values were detected around the second mesiobuccal canal as 0.30 mm at 6 mm below orifice. Dentine thickness around the mesiobuccal canal was significantly greater in fusion type 1 than those of types 2 and 3 ( CONCLUSION: Minimum dentine thickness values at the danger zone of distobuccal and palatal canals change according to the fusion type in fused maxillary second molars.

Prevalence Of Second Mesiobuccal Canal In Maxillary Second Molars On The Basis Of Clinical And Radiographic Parameters.

BACKGROUND: The objective of this study was to determine the prevalence of the second mesiobuccal canal in permanent maxillary second molar in patients presenting to Peshawar Dental College and Hospital. METHODS: One hundred and twenty patients advised for root canal treatment in the maxillary second molars participated in the study. Two detection procedures, clinical and radio graphical examination were used. Two pre-operative radiographs with different angulations and one post-operative radiograph were taken to examine roots and root canals. Access cavities were prepared and the second mesiobuccal canal was explored using magnifying dental loupes (3.5 x), endodontic explorer (DG16) and size 10 K-file. Descriptive statistics were recorded as percentages, frequencies and mean. The chi-square test was used for gender, age-wise comparison and right and left side of the maxillary jaw. RESULTS: One hundred and twenty patients were recruited in the study. There were 65 (54.2%) males and 55 (45.8%) females. The second mesiobuccal canal was more common in males compared to females (p-value=0.434). The second mesiobuccal canal was most commonly found in 3rd decade with mean age, of 40.5±12.31, (p-value =0.51). The frequencies and percentages of the second mesiobuccal canal in maxillary second molars on the right and left side of the jaw were 70 (58.3%) and 50 (41.7%) respectively (p-value =0.310). CONCLUSIONS: The second mesiobuccal canal was found in less than half of the second molars. The most successful method of detection in this study was both clinical and radiographic.

Apical periodontitis in mesiobuccal roots of maxillary molars: influence of anatomy and quality of root canal treatment, a CBCT study.

Objectives: This study aimed to evaluate the prevalence of apical periodontitis (AP) in the mesiobuccal roots of root canal-treated maxillary molars. Materials and Methods: One thousand cone-beam computed tomography images of the teeth were examined by 2 dental specialists in oral radiology and endodontics. The internal anatomy of the roots, Vertucci's classification, quality of root canal treatment, and presence of missed canals were evaluated; additionally, the correlation between these variables and AP was ascertained. Results: A total of 1,000 roots (692 first molars and 308 second molars) encompassing 1,549 canals were assessed, and the quality of the root canal filling in the majority (56.9%) of the canals was satisfactory. AP was observed in 54.4% of the teeth. A mesiolingual canal in the mesiobuccal root (MB2 canal) was observed in 54.9% of the images, and the majority (83.5%) of these canals were not filled. Significant associations were observed between the presence of an MB2 canal and the quality of the root canal filling and the presence of AP. Conclusions: AP was detected in more than half of the images. The MB2 canals were frequently missed or poorly filled.