Continuous Rapid Fabrication of Ceramic Fiber Sponge Aerogels with High Thermomechanical Properties via a Green and Low-Cost Electrospinning Technique.

Ceramic aerogel is an appealing fireproof and heat-insulation material, but synchronously improving its mechanical and thermal properties is a challenge. Moreover, the expensive discontinuous processing techniques inhibit the large-scale fabrication of ceramic aerogels. Here, we propose a water-based electrospinning method, based on the hydrolysis and condensation reactions of ceramic precursor salts themselves, for the continuous and rapid (0.025 m3/min) fabrication of ceramic fiber sponge aerogels with dual micronano fiber networks, which show synchronous enhanced fireproof, thermal insulation, and resilience performance. The elastic ceramic micro/nano fiber sponge aerogels contain robust silica-based microfibers as a firm skeleton and alumina-based nanofibers as elastic thermal insulation filler. The sponges have a high porosity of >99.8%, a low mass density (6.21 mg/cm3), a small thermal conductivity (0.022 W/m·K), and a large compression strength (21.15 kPa at 80% strain). The ceramic fiber sponges can effectively prevent the propagation of thermal runaway when a lithium battery experiences catastrophic thermal shock (>1000 °C) in the power battery packs. The proposed strategy is feasible for low-cost and rapid synthesizing ceramic aerogels toward effective battery thermal management.

The global prevalence of mental health disorders among runaway and homeless youth: A meta-analysis.

A meta-analysis was performed to identify the pooled prevalence of mental health disorders (MHDs) among runaway and homeless youth (RHY). Relevant studies published between December 1, 1985, and October 1, 2023, were identified in the PubMed, Scopus, Web of Science, and Cochrane Library databases. A preliminary screening of 11,266 papers resulted in the inclusion of 101 studies. The pooled-prevalence estimates were obtained using a random-effects model. The findings showed varying lifetime prevalence rates of MHDs: 47% (conduct disorders and psychological distress), 43% (depression), 34% (major depressive disorders), 33% (post-traumatic stress disorder), 27% (personality disorders), 25% (attention-deficit/hyperactivity disorder), 23% (bipolar disorders), 22% (anxiety), 21% (oppositional defiant disorders), 15% (anorexia), 15% (adjustment disorders), 14% (dysthymia), 11% (schizophrenia), 9% (obsessive-compulsive disorders), and 8% (gambling disorder). The current prevalence rates were: 31% (depression), 23% (major depressive disorder), 23% (anxiety), 21% (post-traumatic stress disorder), 16% (attention-deficit/hyperactivity disorder), 15% (bipolar disorder), 13% (personality disorders), 13% (oppositional defiant disorders), 8% (schizophrenia), and 6% (obsessive-compulsive disorders). Regular screening and the implementation of evidence-based treatments and the promotion of integration and coordination between mental health services for adolescent minors and young adults with other service systems are recommended.

Experimental and simulation investigation on suppressing thermal runaway in battery pack.

In order to address the issue of suppressing thermal runaway (TR) in power battery, a thermal generation model for power batteries was established and then modified based on experimental data. On the basis of simulation calculations, a scheme was designed to suppress thermal runaway of the battery module and battery pack, and samples were produced for testing. The results of the test and simulation calculations were very consistent, confirming the accuracy of the simulation calculation model. The results of thermal runaway test also demonstrate that the measures designed to suppress thermal runaway are effective and meet the design requirements.

Phonon Engineering in Solid Polymer Electrolyte toward High Safety for Solid-State Lithium Batteries.

Extensively-used rechargeable lithium-ion batteries (LIBs) face challenges in achieving high safety and long cycle life. To address such challenges, ultrathin solid polymer electrolyte (SPE) is fabricated with reduced phonon scattering by depositing the composites of ionic-liquid (1-ethyl-3-methylimidazolium dicyamide, EMIM:DCA), polyurethane (PU) and lithium salt on the polyethylene separator. The robust and flexible separator matrix not only reduces the electrolyte thickness and improves the mobility of Li+, but more importantly provides a relatively regular thermal diffusion channel for SPE and reduces the external phonon scattering. Moreover, the introduction of EMIM:DCA successfully breaks the random intermolecular attraction of the PU polymer chain and significantly decreases phonon scattering to enhance the internal thermal conductivity of the polymer. Thus, the thermal conductivity of the as-obtained SPE increases by approximately six times, and the thermal runaway (TR) of the battery is effectively inhibited. This work demonstrates that optimizing thermal safety of the battery by phonon engineering sheds a new light on the design principle for high-safety Li-ion batteries.

Intrinsically Safe Lithium Metal Batteries Enabled by Thermo-Electrochemical Compatible In Situ Polymerized Solid-State Electrolytes.

In situ polymerized solid-state electrolytes have attracted much attention due to high Li-ion conductivity, conformal interface contact, and low interface resistance, but are plagued by lithium dendrite, interface degradation, and inferior thermal stability, which thereby leads to limited lifespan and severe safety hazards for high-energy lithium metal batteries (LMBs). Herein, an in situ polymerized electrolyte is proposed by copolymerization of 1,3-dioxolane with 1,3,5-tri glycidyl isocyanurate (TGIC) as a cross-linking agent, which realizes a synergy of battery thermal safety and interface compatibility with Li anode. Functional TGIC enhances the electrolyte polymeric level. The unique carbon-formation mechanism facilitates flame retardancy and eliminates the battery fire risk. In the meantime, TGIC-derived inorganic-rich interphase inhibits interface side reactions and promotes uniform Li plating. Intrinsically safe LMBs with nonflammability and outstanding electrochemical performances under extreme temperatures (130 °C) are achieved. This functional polymer design shows a promising prospect for the development of safe LMBs.

Mechanism and Control Strategies of Lithium-Ion Battery Safety: A Review.

Lithium-ion batteries (LIBs) are extensively used everywhere today due to their prominent advantages. However, the safety issues of LIBs such as fire and explosion have been a serious concern. It is important to focus on the root causes of safety accidents in LIBs and the mechanisms of their development. This will enable the reasonable control of battery risk factors and the minimization of the probability of safety accidents. Especially, the chemical crosstalk between two electrodes and the internal short circuit (ISC) generated by various triggers are the main reasons for the abnormal rise in temperature, which eventually leads to thermal runaway (TR) and safety accidents. Herein, this review paper concentrates on the advances of the mechanism of TR in two main paths: chemical crosstalk and ISC. It analyses the origin of each type of path, illustrates the evolution of TR, and then outlines the progress of safety control strategies in recent years. Moreover, the review offers a forward-looking perspective on the evolution of safety technologies. This work aims to enhance the battery community's comprehension of TR behavior in LIBs by categorizing and examining the pathways induced by TR. This work will contribute to the effective reduction of safety accidents of LIBs.

Thermal Warning and Shut-down of Lithium Metal Batteries Based on Thermoresponsive Electrolytes.

The thermal runaway issue represents a long-standing obstacle that retards large-scale applications of lithium metal batteries. Various approaches to inhibit thermal runaway suffer from some intrinsic drawbacks, either being irreversible or delayed thermal protection. Herein, this work has explored thermo-responsive lower critical solution temperature (LCST) ionic liquid-based electrolytes, which provides reversible overheating protection for batteries with warning and shut-down stages, well corresponding to an initial stage of thermal runaway process. The batteries could function stably below 70 °C as a working mode, while demonstrating a warning mode above 80 °C with a noticeable reduction in specific capacitance to delay temperature increase of batteries. In terms of 110 °C as a critically dangerous temperature, a shut-down mode is designed to minimize the thermal energy releasing as the batteries are barely chargeable and dischargeable. Dynamically growing polymeric particles above LCST contributed to such an intelligent and mild control on specific capacitance. Larger size will occupy larger surfaces of electrodes and close more pores of separators, enabling a gradual suppressing of Li+ transfer and reactions. The present work demonstrated a scientific design of thermoresponsive LCST electrolytes with a superiorly precise and intelligent control of electrochemical performances to achieve self-adapted overheating protections.

Prevention and Intervention Strategies for the Sexual Abuse and Commercial Sexual Exploitation of Children Who Run Away from Foster Care: A Scoping Review.

Literature on human trafficking suggests the vulnerability to commercial sexual exploitation of children (CSEC) and child sexual abuse (CSA) changes by the prevalence of certain risk factors (e.g., runaway), trafficker-used lures (e.g., isolation), and the environmental conditions present at the time of victimization (e.g., foster care). Often, youth in foster care are at high risk for CSEC and CSA victimization associated with runaway instances. This scoping review aims to identify prevention and intervention strategies for CSEC/CSA of youth who run away from foster care. PRISMA scoping review guidelines were followed to review the literature across two search parameters (CSEC; CSA). An electronic review was conducted between August 2022 and January 2023 across four databases: PubMed, SAGE Journals Online, ScienceDirect, and Web of Science. The CSEC and CSA search parameters comprised three domains (sexual exploitation, foster care, and runaway; sexual abuse, foster care, and runaway, respectively). Literature published between 2012 and 2022 was included regardless of the methodological approach. Literature not concerning youth who run from foster care was excluded. Database searches yielded 206 publications for CSEC and 351 for CSA, reduced to 185 and 212, respectively, after removing duplicates. Seventy-one articles were identified, of which, 64 articles (28 CSEC, 36 CSA) were categorized as prevention strategies and seven (five CSEC, two CSA) as interventions. The intersection and dual victimization of CSEC and CSA of youth who run away from foster care are discussed. This paper also discusses applied behavior analysis principles for developing function-based interventions.

High-Safety Lithium-Ion Battery Separator with Adjustable Temperature Function Inspired by the Sugar Gourd Structure.

As the power core of an electric vehicle, the performance of lithium-ion batteries (LIBs) is directly related to the vehicle quality and driving range. However, the charge-discharge performance and cycling performance are affected by the temperature. Excessive temperature can cause internal short circuits and even lead to safety issues, such as thermal runaway. The separator plays a crucial role in protecting the battery from regular operation, preventing direct touch between the cathode and the anode while allowing the transport of lithium ions. In this study, we have designed a thermoregulating separator in the shape of calabash, which uses melamine-encapsulated paraffin phase change material (PCM) with a wide enthalpy (0-168.52 J g-1) to dissipate the heat generated inside the battery promptly. Under extra-long-use conditions, the heat emitted by the battery is absorbed by the PCM without causing a significant temperature rise that triggers thermal runaway. The PCM separator can effectively suppress the temperature increase caused by battery penetration. Due to the unique structure of the PCM, the battery is short-circuited; it can significantly delay the internal temperature rise of the battery and quickly dissipate the heat, which is consistent with the characteristics of natural calabash in nutrient absorption and water diffusion, improving the melting and heat storage efficiency of the PCM. The design of the phase change separator provides an effective reference for overheat protection and improved safety in lithium-ion batteries.

Stable interphase inducer based on montmorillonite clay mineral to enhance stability and fire safety for lithium metal batteries.

Heat buildup from factors like mechanical, electrical, or thermal stress is the main safety issue in lithium metal batteries (LMBs). Even without such stressors, however, LMBs may remain fire-prone because of the development of unstable electrode-electrolyte interphase on charge-discharge, potentially leading to internal short circuits. In this study, a stable cathode-electrolyte interphase inducer (SCEI-I) is proposed to tackle both the cycling stability issue and safety concerns. SCEI-I is synthesized by incorporating montmorillonite, a clay mineral, and methylphosphonic acid dimethyl ester, a flame-retardant material, onto a porous polyethylene film. On cycling, SCEI-I can induce a thin (<8 nm), uniform and robust cathode-electrolyte interphase layer, contributing to a steady and high Coulombic efficiency of 99.6%-99.8% with decreased impedance. SCE-I improves electrochemical performance by reducing the capacity degradation from ∼21.9% to ∼8.9% after 100 cycles. SCE-I also demonstrates strong thermal stability as the endothermic energy of SCEI-I is only -32.4 J/g (24 °C-280 °C), which is less than one-third of that of polypropylene separator (-118.9 J/g). Furthermore, when exposed to fire, the SCEI-I membrane instantly extinguished flames by disrupting combustion chain reaction. The present study proposes an interfacial engineering approach to improve the stability and safety of LMBs.

Failure Mechanism and Thermal Runaway in Batteries during Micro-Overcharge Aging at Different Temperatures.

This paper provides insights into the four key behaviors and mechanisms of the aging to failure of batteries in micro-overcharge cycles at different temperatures, as well as the changes in thermal stability. The test results from a scanning electron microscope (SEM) and an energy-dispersive spectrometer (EDS) indicate that battery failure is primarily associated with the rupture of cathode materials, the fracturing and pulverization of electrode materials on the anode current collector, and the formation of lithium dendrites. Additionally, battery safety is influenced by environmental temperatures and the battery's state of health (SOH), with failed batteries exhibiting the poorest stability and the highest mass loss rates. Under isothermal conditions, micro-overcharge leads to battery failure without thermal runaway. Thus, temperature stands out as the most influential factor in battery safety. These insights hold significant theoretical and practical value for the development of more precise and secure battery management systems.

Comparative study on the thermal runaway characteristics of Li(NixCoyMnz)O2 batteries.

Lithium-ion batteries (LIBs) generate substantial gas during the thermal runaway (TR) process, presenting serious risks to electrochemical energy storage systems in case of ignition or explosions. Previous studies were mainly focused on investigating the TR characteristics of Li(NixCoyMnz)O2 batteries with different cathode materials, but they were conducted in isolation. In this study, the thermal runaway characteristics of prismatic cells that use Li(NixCoyMnz)O2 (with x ranging from 0.33 to 0.9) cathode materials in an inert environment, which are commonly used or proposed for energy storage applications, are examined. The findings of this research show that the normalized gas generation rate remains consistent, regardless of the battery capacity or experimental chamber volume, with a value of 0.1 ± 0.03 mol∙Ah⁻1. High-capacity cells have short jetting durations, and a high nickel content leads to increased mass loss rates. The flammability limits of the gases expelled during thermal runaway, represented by the lower flammability limit (LFL), remain stable at 8 ± 1.8 % with minimal variations. However, the upper flammability limit (UFL) varies significantly, ranging from 30 % to 60 %. Increasing the battery capacity or reducing the experimental chamber volume increases the explosion index. The explosive, combustibility, and jetting duration characteristics of the emitted gases from five different battery chemical compositions provide valuable insights for risk assessment in future electrochemical energy storage systems.

Is biased mutation sufficient to save runaway sexual selection?

In the 1980s, groundbreaking theoretical studies showed that orna- ments displayed during courtship can coevolve with preferences for such ornaments, leading to extreme exaggeration of both traits. Later mod- els cast doubt on such 'runaway' sexual selection, showing that even a small cost of preferences can prevent exaggerated ornaments from per- sisting long-term. It was subsequently shown that if mutations acting on the ornament are biased - tending to produce smaller rather than larger ornaments - then exaggeration can persist even in the presence of pref- erence costs, seemingly vindicating the original models. Here, we unpack an implicit assumption of these 'biased mutation' models: Mutations are assumed to lead, on average, to both smaller and less costly ornaments. Biased mutation consequently generates both a fitness cost (due to re- duced mating success) and a fitness benefit (due to increased survival). We lift this assumption by separating an individual's investment in an or- nament from their efficiency in converting such investment into ornament size. We assume that biased mutation acts only on efficiency, but not on investment, and discuss the plausibility of this alternative assumption. Our model predicts that exaggerated ornaments and preferences can per- sist stably once they arise, but that strong initial preferences are needed to kick-start the runaway process. Consequently, biased mutation alone may not always be sufficient to save runaway sexual selection.

Thermal Runaway Mechanism in Ni-Rich Cathode Full Cells of Lithium-Ion Batteries: The Role of Multidirectional Crosstalk.

Crosstalk, the exchange of chemical species between battery electrodes, significantly accelerates thermal runaway (TR) of lithium-ion batteries. To date, the understanding of their main mechanisms has centered on single-directional crosstalk of oxygen (O2) gas from the cathode to the anode, underestimating the exothermic reactions during TR. However, the role of multidirectional crosstalk in steering additional exothermic reactions is yet to be elucidated due to the difficulties of correlative in situ analyses of full cells. Herein, the way in which such crosstalk triggers self-amplifying feedback is elucidated that dramatically exacerbates TR within enclosed full cells, by employing synchrotron-based high-temperature X-ray diffraction, mass spectrometry, and calorimetry. These findings reveal that ethylene (C2H4) gas generated at the anode promotes O2 evolution at the cathode. This O2 then returns to the anode, further promoting additional C2H4 formation and creating a self-amplifying loop, thereby intensifying TR. Furthermore, CO2, traditionally viewed as an extinguishing gas, engages in the crosstalk by interacting with lithium at the anode to form Li2CO3, thereby accelerating TR beyond prior expectations. These insights have led to develop an anode coating that impedes the formation of C2H4 and O2, to effectively mitigate TR.

Side Reactions/Changes in Lithium-Ion Batteries: Mechanisms and Strategies for Creating Safer and Better Batteries.

Lithium-ion batteries (LIBs), in which lithium ions function as charge carriers, are considered the most competitive energy storage devices due to their high energy and power density. However, battery materials, especially with high capacity undergo side reactions and changes that result in capacity decay and safety issues. A deep understanding of the reactions that cause changes in the battery's internal components and the mechanisms of those reactions is needed to build safer and better batteries. This review focuses on the processes of battery failures, with voltage and temperature as the underlying factors. Voltage-induced failures result from anode interfacial reactions, current collector corrosion, cathode interfacial reactions, overcharge, and over-discharge, while temperature-induced failure mechanisms include SEI decomposition, separator damage, and interfacial reactions between electrodes and electrolytes. The review also presents protective strategies for controlling these reactions. As a result, the reader is offered a comprehensive overview of the safety features and failure mechanisms of various LIB components.

Experimental analysis and safety assessment of thermal runaway behavior in lithium iron phosphate batteries under mechanical abuse.

Mechanical abuse can lead to internal short circuits and thermal runaway in lithium-ion batteries, causing severe harm. Therefore, this paper systematically investigates the thermal runaway behavior and safety assessment of lithium iron phosphate (LFP) batteries under mechanical abuse through experimental research. Mechanical abuse experiments are conducted under different conditions and battery state of charge (SOC), capturing force, voltage, and temperature responses during failure. Subsequently, characteristic parameters of thermal runaway behavior are extracted. Further, mechanical abuse conditions are quantified, and the relationship between experimental conditions and battery characteristic parameters is analyzed. Finally, regression models for battery safety boundaries and the degree of thermal runaway risk are established. The research results indicate that the extracted characteristic parameters effectively reflect internal short circuit (ISC) and thermal runaway behaviors, and the regression models provide a robust description of the battery's safety boundaries and thermal runaway risk degree. This work sheds light on understanding thermal runaway behavior and safety assessment methods for lithium-ion cells under mechanical abuse.

Study on the electrical-thermal properties of lithium-ion battery materials in the NCM622/graphite system.

The phenomenon of fire or even explosion caused by thermal runaway of lithium-ion power batteries poses a serious threat to the safety of electric vehicles. An in-depth study of the core-material thermal runaway reaction mechanism and reaction chain is a prerequisite for proposing a mechanism to prevent battery thermal runaway and enhance battery safety. In this study, based on a 24 Ah commercial Li(Ni0.6Co0.2Mn0.2)O2/graphite soft pack battery, the heat production characteristics of different state of charge (SOC) cathode and anode materials, the separator, the electrolyte, and their combinations of the battery were investigated using differential scanning calorimetry. The results show that the reaction between the negative electrode and the electrolyte is the main mode of heat accumulation in the early stage of thermal runaway, and when the heat accumulation causes the temperature to reach a certain critical value, the violent reaction between the positive electrode and the electrolyte is triggered. The extent and timing of the heat production behaviour of the battery host material is closely related to the SOC, and with limited electrolyte content, there is a competitive relationship between the positive and negative electrodes and the electrolyte reaction, leading to different SOC batteries exhibiting different heat production characteristics. In addition, the above findings are correlated with the battery failure mechanisms through heating experiments of the battery monomer. The study of the electro-thermal properties of the main materials in this paper provides a strategy for achieving early warning and suppression of thermal runaway in batteries.

The Global Prevalence of Non-suicidal Self-injury, Suicide Behaviors, and Associated Risk Factors Among Runaway and Homeless Youth: A Meta-analysis.

A meta-analysis was performed to determine pooled prevalence of non-suicidal self-injury (NSSI), suicide behaviors (including ideation, attempts), and associated risk factors among runaway and homeless youth (RHY). The databases PubMed, Scopus, Web of Science, and Cochrane Library were searched for relevant studies published from January 1995 to May 2023. Initially, 8465 papers were screened, resulting in 69 included studies. The results showed that among RHY, lifetime prevalence rates were 42% for NSSI, 38% for suicidal ideation, and 27% for suicide attempts. Lifetime prevalence of NSSI and suicide behaviors was higher among adolescent minors (aged 12-17 years) compared to young adults (aged 18-24 years). Also, NSSI and suicide behaviors were associated with having a childhood history of physical and sexual abuse. Developing an impactful community-based suicide prevention campaign tailored for RHY appears warranted. Peer groups and mentorship programs would provide invaluable support for young individuals, as supportive friendships protect against NSSI.

A Safe One-Pot Synthesis and Characterization of Epoxidized Moringa Oleifera Oil.

Global demand for epoxidized vegetable oil has been steadily growing. Epoxidized vegetable oils are typically produced using a two-pot synthesis process in which the oxidation and epoxidation reactions are carried out sequentially. This two-pot synthesis method, however, has a major drawback in industrialscale production, particularly when it comes to operational and process safety issues. A laboratory-scale one-pot synthesis method was attempted in this study with the aim to safely synthesize epoxidized Moringa Oleifera oil (eMOo) by avoiding the occurrence of undesired exothermic runaway reaction. The oil extracted from Moringa Oleifera oil seed kernel (MOo) was used as a starting component due to its high degree of unsaturation and also because the Moringa Oleifera plant can be freely grown in any soil conditions. Two parallel oxidation and epoxidation reactions were carried out simultaneously in this one-pot synthesis method to produce eMOo. The effect of five different mole ratios of MOo, acetic acid and hydrogen peroxide (1:1:1, 1:1:2, 1:1.5:2, 1:1.75:2 and 1:2:2, respectively) on reaction mechanism was investigated at the controlled temperature range of 43 - 55°C and reaction time of 0 - 120 min. The physicochemical properties of MOo as well as the oxirane oxygen content (OOC) of the resulting eMOo were characterized. In addition, GC-MS and FTIR analysis were performed to verify the molecular composition of MOo and also to identify the epoxy group of the resulting eMOo respectively. Among the five different mole ratios studied, the 1:1.5:2 mole ratio has the highest unsaturation conversion of 79.57% and OOC of 4.12%.

Influence of cathode materials on thermal characteristics of lithium-ion batteries.

In this work, the thermal stability of four types of 18,650 lithium-ion batteries with LiCoO2 (LCO), LiFePO4 (LFP), LiNi0.8Co0.1Mn0.1O2 (NCM811) and LiNi0.8Co0.15Al0.05O2 (NCA) materials as cathodes are experimentally investigated by the accelerating rate calorimeter (ARC) and the isothermal battery testing calorimeter (iso-BTC) under adiabatic and isothermal conditions, respectively. The thermal runaway danger level of these batteries can be ranked as LCO > NCA > NCM811 >> LFP by judging from the values of Tmax and HRmax, nominal. The higher the nickel and cobalt content, the higher the lithium-ion battery capacity, but the worse the thermal stability. The Qtotal of NCA is the largest in the complete standard charge and discharge process, due to that the capacity of NCA is significantly higher than that of the other three batteries, resulting in remarkable increase in Qirre proportioned to the square of the current. When the ambient temperature rises, the energy release decreases owing to the decrease in the internal resistance of the battery. These studies are expected to have important implications for the subsequent safe design of commercial lithium-ion batteries with different cathode materials.