The Effect of Mechanical Alteration on Repair Bond Strength of S-PRG-Filler-Based Resin Composite Materials.

This study investigates the impact of mechanical alteration on resin composite surfaces and its subsequent effect on repair bond strength. A total of 100 resin composite disks were prepared and were allocated for 24 h or 1 year of artificial aging. Specimens were embedded in epoxy resin, and the composite surfaces were mechanically altered using either diamond burs or air abrasion with aluminum oxide or glass beads. A universal bonding material was applied and a 2 mm circular and 3 mm high repair composite cylinder were prepared using a Teflon mold. Then, the specimens were tested for their shear bond strength, and the de-bonded specimens were observed under a scanning electron microscope to determine the failure pattern. SPSS 26.0 statistical software was used to analyze the data. Two-way ANOVA showed a statistically significant effect of mechanical alteration and aging on the shear bond strength of S-PRG-filler-based resin composite (p < 0.05). Surface modification with a fine diamond bur showed a significantly higher bond strength in both 24-h- and 1-year-aged specimens. Surface modification with alumina significantly increased the bond strength of 1-year-aged specimens; however, it was statistically insignificant for 24 h-aged specimens. Mechanical alteration with a fine diamond bur and 50-micron alumina can improve the repair bond strength of the composite.

Control de la biopelícula con materiales bioactivos en pacientes adolescentes: reporte de caso / Biofilm control with bioactive materials in adolescents' patients: case report

El objetivo del artículo es reportar el desempeño clínico en el control y disminución de la placa bacteriana en pacientes adolescentes mediante un gel y barniz con partículas S-PRG. Se realizaron tratamientos con materiales bioactivos con tecnología GIOMER en 2 pacientes. En el primer caso se realizó una profilaxis con Pro Care Gel (S-PRG) en un paciente de 15 años con problemas neuromotores para eliminar la placa y posteriormente, se aplicó un barniz con partículas de S-PRG para prevenir la formación de biofilm. En el segundo caso, un adolescente de 15 años normoreactivo con inflamación gingival recibió el tratamiento profilaxis con PRG Pro Care Gel.Se observó una disminución de placa bacteriana tras la profilaxis con el gel Pro Care y la aplicación del barniz en el primer caso. Además, existió una baja incidencia de biofilm incluso después de 11 meses de la aplicación del barniz. En el segundo caso, a las 2 horas de aplicación, se observó una disminución total de la placa. Clínicamente se observó el bueno desempeño clínico de los materiales con partículas de S-PRG, como lo demuestra la literatura científica en cuanto a la reducción de la formación de placa bacteriana en las estructuras dentarias, la desinflamación gingival, proporciona bienestar a los pacientes y restaura la salud bucal de forma menos invasiva.

The objective of the article is to report the clinical performance in the control and reduction of bacterial plaque in adolescent patients using a gel and varnish with S-PRG particles. Treatments with bioactive materials with GIOMER technology were performed in two patients. In the first case, prophylaxis was performed with Pro Care Gel (S-PRG) in a 15-year-old patient with neuromotor problems to eliminate plaque and subsequently, a varnish with S-PRG particles was applied to prevent biofilm formation. In the second case, a normal 15-year-old adolescent with gingival inflammation received prophylaxis treatment with PRG Pro Care Gel. A decrease in bacterial plaque was observed after prophylaxis with the Pro Care gel and the application of the varnish in the first case. Furthermore, there was a low incidence of biofilm even after 11 months of varnish application. In the second case, after 2 hours of application, a total decrease in plaque was observed. The good clinical performance of materials with S-PRG particles was clinically perceived, as demonstrated by the scientific literature in terms of reducing the formation of bacterial plaque in dental structures, gingival disinflammation, providing well-being to patients and restoring oral health in a less invasive way.

Bioactivity of human dental pulp-derived stem cells with boron-controlled S-PRG filler eluate by anion exchange.

Surface pre-reacted glass-ionomer (S-PRG) filler is a bioactive glass filler capable of releasing various ions. A culture medium to which was added an S-PRG filler eluate rich in boron was reported to enhance alkaline phosphatase (ALP) activity in human dental pulp-derived stem cells (hDPSC). To clarify the role of boron eluted from S-PRG fillers, the modified S-PRG filler eluate with different boron concentrations was prepared by using an anion exchange material. Therefore, elemental mapping analysis of anion exchange material, adsorption ratio, hDPSCs proliferation and ALP activity were evaluated. For statistical analysis, Kruskal-Wallis test was used, with statistical significance determined at p<0.05. ALP activity enhancement was not observed in hDPSC cultured in the medium that contained the S-PRG filler eluate from which boron had been removed. The result suggested the possibility that an S-PRG filler eluate with controlled boron release could be useful for the development of novel dental materials.

Effect of topical applications containing surface pre-reacted glass-ionomer filler on dental hard tissues-A systematic review.

OBJECTIVES: The objective of this systematic review was to assess the efficacy of topical applications containing surface pre-reacted glass-ionomer filler on dental hard tissues. DATA SOURCES: A comprehensive literature search was conducted in PubMed, MEDLINE, Embase, Scopus, ClinicalTrials.gov, Lilacs and Cochrane Central Register of Controlled Trials (until 15.08.2022). Google and Open Grey were used to search for grey literature and handsearching was conducted. STUDY SELECTION: Clinical and in vitro studies conducted on human adult teeth were considered eligible without date and language restrictions. The electronic database generated 2,488 results. In total, 227 studies were found to be relevant from which 71 duplicates were removed. Title and abstract screening were then conducted, and a total of 33 studies met the inclusion criteria were assessed for full text screening. Two authors concluded that 11 studies satisfied the eligibility criteria. In vitro studies were evaluated using an accepted quality assessment tool for dental studies. Cochrane risk of bias tool was used for quality assessment of clinical randomised studies, whilst ROBINS-I tool was used for non-randomised studies. RESULTS: Nine in vitro and only two non-randomised clinical trials were reported to meet the eligibility criteria. Results were grouped and analysed separately according to the study design. Different modes of surface pre-reacted glass-ionomer filler delivery were reported in the included studies. Three studies tested the effect of surface pre-reacted glass-ionomer filler containing toothpastes, whilst three studies investigated the effect of polishing pastes with surface pre-reacted glass-ionomer filler, three studies used eluates as surface pre-reacted glass-ionomer filler delivery method and two studies reported the effect of the coatings. The effect of those vehicles was tested on enamel, dentine or oral biofilm. Each study was analysed individually, and heterogeneity was detected among in vitro and clinical studies. Half of the in vitro studies were medium risk, whilst three were low and two studies presented with high risk. In clinical trials, outcome, confounding, selection biases were reported. Meta-analysis was therefore unable to be carried out. CONCLUSION: Regardless of the mode of delivery and type of studies, all included studies demonstrated the efficacy of surface pre-reacted glass-ionomer filler containing topical applications to inhibit demineralisation of dental hard tissues at a dose dependant manner. Antimicrobial properties towards cariogenic species were also reported. CLINICAL SIGNIFICANCE: Surface pre-reacted glass-ionomer filler containing topical applications may serve as potential caries preventive and cariostatic tools. The systematic review registered in PROSPERO, International prospective register of systematic reviews, No. CRD42022347130.

Influence of surface pre-reacted glass-ionomer (S-PRG) filler eluate on collagen morphology, remineralization, and ultimate tensile strength of demineralized dentin.

OBJECTIVE: To evaluate the effect of ions released from surface pre-reacted glass-ionomer (S-PRG) filler on collagen morphology, remineralization, and ultimate tensile strength (UTS) of demineralized dentin. MATERIALS AND METHODS: Bovine incisor root dentins were demineralized with EDTA and divided into three treatment groups: 1) water (control); 2) S-PRG filler eluate; 3) 125 ppm sodium fluoride (NaF). After a 3-min treatment, the specimens were stored in simulated body fluid (SBF) for 3 months. Collagen morphology and remineralization were assessed using transmission electron microscopy (TEM), scanning electron microscopy (SEM), and Fourier-transform infrared spectroscopy (FTIR). Additionally, ultimate tensile strength (UTS) was measured. RESULTS: TEM and SEM demonstrated that S-PRG induced more effective remineralization compared to NaF, while the control group exhibited faint mineral deposition with collagen degradation. S-PRG displayed the most homogenous mineral deposition in collagen fibrils, along with closure of interfibrillar spaces. Extensive mineral precipitation was observed within dentinal tubules in the S-PRG group. In addition, S-PRG filler eluate demonstrated significantly higher phosphate-to-amide ratio and UTS compared to NaF and control groups (p < 0.05). CONCLUSIONS: Ion released from S-PRG filler positively influenced collagen morphology, remineralization, and ultimate tensile strength of demineralized dentin. CLINICAL SIGNIFICANCE: S-PRG filler enhances remineralization and improve the biomechanics of demineralized dentin.

Effect of an In-Office Bleaching Agent with Surface Pre-Reacted Glass-Ionomer Filler on the Enamel Surface: A In-Vitro Study.

In-office bleaching with high concentrations of hydrogen peroxide (H2O2) agents causes undesirable alterations in the enamel. Surface pre-reacted glass-ionomer (S-PRG) filler is a functional material known for its acid-neutralizing and demineralization-inhibition properties. This study evaluates the effect of S-PRG filler incorporation in H2O2-based bleaching on the enamel surface. Bovine enamel surfaces were bleached using a bleaching paste formulated with a liquid (35% H2O2) and a powder containing 5% or 10% S-PRG filler. The surface roughness and the Vickers microhardness of the treated enamel surfaces were evaluated. The enamel surfaces were observed under a scanning electron microscope (SEM) and analyzed using energy dispersive X-ray (EDX) technology. The surfaces were challenged by citric acid and observed by SEM. The specimens bleached with the paste containing the S-PRG filler showed lower enamel surface roughness and higher microhardness values than did those bleached with the plain paste (0% S-PRG filler); meanwhile, there were no significant differences between the 5% or 10% S-PRG filler groups. The S-PRG filler groups showed enamel surface morphologies similar to those of the non-bleached enamel, according to SEM observation, and EDX analysis detected the presence of fluoride and strontium ions. The S-PRG filler groups showed a higher resistance to erosion. The S-PRG filler mitigated the detrimental effects of bleaching agents on the enamel surface and provided resistance to erosion.

Salivary fluoride concentrations following toothbrushing with experimental toothpaste containing surface pre-reacted glass-ionomer (S-PRG) filler.

BACKGROUND: Single-blind 9 case comparative studies were conducted to evaluate salivary fluoride concentrations following toothbrushing using experimental toothpaste containing surface pre-reacted glass-ionomer (S-PRG) fillers. Preliminary tests were conducted in order to determine the volume of usage as well as the concentrations (wt %) of S-PRG filler. Based on the results given these experiments, we compared the salivary fluoride concentrations following toothbrushing with 0.5 g of 4 different types of toothpastes: 5 wt % S-PRG filler, 1400 ppm F AmF (amine fluoride), 1500 ppm F NaF (sodium fluoride), and MFP (monofluorophosphate) containing toothpaste. METHODS: Of the 12 participants, 7 participated in the preliminary study and 8 in the main study. All participants brushed their teeth using the scrubbing method for 2 min. At first, 1.0 and 0.5 g of 20 wt % S-PRG filler toothpastes were used to compare, then followed by 0.5 g of 0 (control), 1, and 5 wt % S-PRG toothpastes, respectively. The participants spat out once and rinsed with 15 mL of distilled water for 5 s. Saliva was collected for 3 min each at different time intervals of 0 (baseline), 5, 10, 15, 30, 60, 120, and 180 min after the rinsing. Fluoride concentrations were determined using a fluoride electrode, and the area under the salivary clearance - time curve (AUC: ppm‧min) of each toothpaste was calculated as the salivary fluoride retention. The main study was then conducted to evaluate the salivary fluoride concentrations as well as the AUC value using 0.5 g of 5 wt % S-PRG filler toothpaste, followed by NaF, MFP, and AmF toothpastes. RESULTS: Since there were no statistical differences between using 1.0 and 0.5 g of 20 wt % S-PRG toothpastes in salivary fluoride concentrations as well as the AUC value throughout the 180 min measurement, the volume was set as 0.5 g for the following studies. Concentrations of 5 and 20 wt % S-PRG toothpastes retained 0.09 ppm F or more in saliva even after 180 min. No statistical differences were seen in the salivary fluoride concentrations at any time intervals as well as the AUC value between 5 and 20 wt % S-PRG toothpastes. Based on these results, the concentration of 5 wt % S-PRG toothpaste was used for the main comparative study. MFP toothpaste resulted in by far the lowest salivary fluoride concentrations (0.06 ppm F at 180 min) and the AUC value (24.6 ppm‧min), whereas 5 wt % S-PRG toothpaste (0.15 ppm F at 180 min, 92.3 ppm‧min) displayed retention on par with AmF toothpaste which appeared to result in higher values (0.17 ppm F at 180 min, 103 ppm‧min), compared to NaF toothpaste (0.12 ppm F at 180 min, 49.3 ppm‧min). CONCLUSIONS: The salivary fluoride concentrations following toothbrushing with 0.5 g of 5 wt % S-PRG filler containing toothpaste showed retention similar to the best performing 1400 ppm F AmF toothpaste even 180 min after toothbrushing.

Multiple-Ion Releasing Bioactive Surface Pre-Reacted Glass-Ionomer (S-PRG) Filler: Innovative Technology for Dental Treatment and Care.

Surface Pre-Reacted Glass-ionomer (S-PRG) filler, which releases strontium (Sr2+), borate (BO33-), fluoride (F-), sodium (Na+), silicate (SiO32-), and aluminum (Al3+) ions at high concentrations, is a unique glass filler that are utilized in dentistry. Because of its multiple-ion releasing characteristics, S-PRG filler exhibits several bioactivities such as tooth strengthening, acid neutralization, promotion of mineralization, inhibition of bacteria and fungi, inhibition of matrix metalloproteinases, and enhancement of cell activity. Therefore, S-PRG filler per se and S-PRG filler-containing materials have the potential to be beneficial for various dental treatments and care. Those include restorative treatment, caries prevention/management, vital pulp therapy, endodontic treatment, prevention/treatment of periodontal disease, prevention of denture stomatitis, and perforation repair/root end filling. This review summarizes bioactive functions exhibited by S-PRG filler and its possible contribution to oral health.

Effect of Particle Sizes and Contents of Surface Pre-Reacted Glass Ionomer Filler on Mechanical Properties of Auto-Polymerizing Resin.

Herein, the mechanical properties of an auto-polymerizing resin incorporated with a surface pre-reacted glass ionomer (S-PRG) filler were evaluated. For this, S-PRG fillers with particle sizes of 1 µm (S-PRG-1) and 3 µm (S-PRG-3) were mixed at 10, 20, 30, and 40 wt% to prepare experimental resin powders. The powders and a liquid (powder/liquid ratio = 1.0 g/0.5 mL) were kneaded and filled into a silicone mold to obtain rectangular specimens. The flexural strength and modulus (n = 12) were recorded via a three-point bending test. The flexural strengths of S-PRG-1 at 10 wt% (62.14 MPa) and S-PRG-3 at 10 and 20 wt% (68.68 and 62.70 MPa, respectively) were adequate (>60 MPa). The flexural modulus of the S-PRG-3-containing specimen was significantly higher than that of the S-PRG-1-containing specimen. Scanning electron microscopy observations of the specimen fracture surfaces after bending revealed that the S-PRG fillers were tightly embedded and scattered in the resin matrix. The Vickers hardness increased with an increasing filler content and size. The Vickers hardness of S-PRG-3 (14.86-15.48 HV) was higher than that of S-PRG-1 (13.48-14.97 HV). Thus, the particle size and content of the S-PRG filler affect the mechanical properties of the experimental auto-polymerizing resin.

Effects of Sr2+, BO33-, and SiO32- on Differentiation of Human Dental Pulp Stem Cells into Odontoblast-Like Cells.

This study aimed to clarify the effects of strontium (Sr2+), borate (BO33-), and silicate (SiO32-) on cell proliferative capacity, the induction of differentiation into odontoblast-like cells (OLCs), and substrate formation of human dental pulp stem cells (hDPSCs). Sr2+, BO33-, and SiO32- solutions were added to the hDPSC culture medium at three different concentrations, totaling nine experimental groups. The effects of these ions on hDPSC proliferation, calcification, and collagen formation after 14, 21, and 28 days of culture were evaluated using a cell proliferation assay, a quantitative alkaline phosphatase (ALP) activity assay, and Alizarin Red S and Sirius Red staining, respectively. Furthermore, the effects of these ions on hDPSC differentiation into OLCs were assessed via quantitative polymerase chain reaction and immunocytochemistry. Sr2+ and SiO32- increased the expression of odontoblast markers; i.e., nestin, dentin matrix protein-1, dentin sialophosphoprotein, and ALP genes, compared with the control group. BO33- increased the ALP gene expression and activity. The results of this study suggested that Sr2+, BO33-, and SiO32- may induce hDPSC differentiation into OLCs.

Effects of a co-stimulation with S-PRG filler eluate and muramyl dipeptide (MDP) on matrix metalloproteinase-1 production by human dental pulp fibroblast-like cells.

The present study investigated the effects of a co-stimulation with surface reaction-type pre-reacted glass-ionomer (S-PRG) filler eluate and muramyl dipeptide (MDP) on matrix metalloproteinase (MMP)-1 production by human dental pulp fibroblast-like cells (hDPFs). S-PRG filler eluate contains 6 ions (F, Na, Al, B, Sr, and Si) released from S-PRG filler. Each S-PRG filler eluate and MDP stimulation enhanced MMP-1 production by hDPFs. The co-stimulation with S-PRG filler eluate and MDP enhanced MMP-1 production more than the MDP stimulation alone. A similar stimulation induced the phosphorylation of ERK 1/2. The increased secretion of MMP-1 and enhanced phosphorylation of ERK 1/2 by the co-stimulation with S-PRG filler eluate and MDP were suppressed by the selective and potent CaSR antagonist NPS 2143. Since strontium binds to CaSR, these results suggest that the enhanced production of MMP-1 by the co-stimulation with S-PRG filler eluate and MDP was due to the effects of strontium.

The inhibitory effects of various ions released from S-PRG fillers on dentin protease activity.

This study investigates the effect of ions released from S-PRG fillers on host-derived enzymatic degradation of dentin collagen matrices. Dentin beams (n=80) were demineralized and distributed to eight groups following baseline dry mass and total MMP activity assessments. Each group treated with boron, fluoride, sodium, silicone, strontium, aluminium, or S-PRG eluate solutions for 5 min. Untreated beams served as control. After pre-treatment, MMP activity was reassessed, beams were incubated in complete medium for 1 week, dry mass was reassessed. Incubation media were analyzed for MMP and cathepsin-K-mediated degradation fragments. Data were analyzed with ANOVA and Tukey's test. All pretreatment groups showed significant reduction in total MMP activity (p<0.05) that was sustainable after incubation in all groups except for boron and silicone groups (p<0.05). Cathepsin-K activity did not differ between control or treatment groups. The results indicated that ions released from S-PRG fillers have the potential to partly inhibit MMP-mediated endogenous enzymatic activity.

Bacterial adhesion and antibacterial property of coating materials containing theobromine and S-PRG filler.

Theobromine (TB) has been reported to promote tooth remineralization, strengthen tooth substance, and relieve dentin hypersensitivity. This study aimed to evaluate experimental tooth coating materials containing TB and surface pre-reacted glass-ionomer (S-PRG) fillers by examining the effects on bacterial adhesion and antibacterial properties. In addition, the amount of TB eluted from the coating material was measured. There was no significant difference in bacterial adhesion depending on the presence or absence of TB in the coating material, however, a significant decrease in the amount of bacterial adhesion was observed when S-PRG fillers were added to the coating material. The amount of eluted TB did not differ depending on the type of the filler in the coating material. It was suggested that TB could be used to develop a new dental material with the potential ability to inhibit the initiation and progression of dental caries.

Antimicrobial efficacy of S-PRG containing toothpastes on S. mutans biofilm development / Eficácia antimicrobiana de dentifrícios contendo S-PRG sobre o desenvolvimento de biofilme de S. mutans

Objective: to investigate the antimicrobial effects of toothpastes containing bioactive surface pre-reacted glass particles (S-PRG) on S. mutans biofilms adherence, initial colonization and maturation. Material and Methods: a reference UA 159 and a clinical S. mutans (SM6) strain were used. Bovine enamel specimens were randomly allocated into the groups (n=5): toothpastes containing 0%; 1%; 5%; 20%; 30% S-PRG; positive control dentifrice (NaF+triclosan); and negative control (distilled water). For biofilm development, samples were placed in a 24-well plate containing artificial saliva (4h), followed by adding 1mL of artificial saliva, BHI broth and 225µL of S. mutans suspension. Treatments with toothpastes were applied previously or after 4h and 24h of biofilm formation. Samples were incubated for 48h at 37°C in 5%CO2 and biofilm was detached and seeded in Petri dishes for determining the number of viable cells. Data were analyzed by ANOVA and Tukey test (5%). Results: significantly lower microorganisms' adherence (p<0.05) was obtained for all S-PRG toothpastes, with similar results to NaF+triclosan for SM6 and 20 and 30%S-PRG groups exhibiting higher inhibition effect than the NaF+Triclosan for UA159. Antibacterial effect on the early-stage biofilm was also observed for the S-PRG groups, but was not superior to the NaF+Triclosan toothpaste. For the mature biofilm, the effective antimicrobial potential of S-PRG toothpastes was observed only for the SM6 clinical strain, but was not higher than the positive control. Conclusion: experimental S-PRG toothpastes were effective to inhibit S. mutans biofilm growth by exhibiting antimicrobial activity, being promising agents to prevent cariogenic biofilm development (AU)

Objetivo: investigar o efeito de dentifrícios contendo S-PRG sobre a colonização inicial e maturação de biofilmes de S. mutans. Material e Métodos: uma cepa de referência (UA 159) e uma cepa clínica de S. mutans (SM6) foram utilizadas. Espécimes de esmalte bovino foram alocados nos grupos (n=5): dentifrícios contendo 0%; 1%; 5%; 20% e 30%S-PRG; controle positivo (NaF+triclosan); e controle negativo (água destilada). Os espécimes foram inseridos em uma placa de 24 poços contendo saliva artificial (4h), seguido por adição de 1mL de saliva artificial, BHI, 225µL de suspensão de S. mutans e foram tratados com suspensões de dentifrícios antes ou depois de 4 e 24h da formação do biofilme. Os espécimes foram incubados por 48h e o biofilme foi removido dos espécimes e semeado em placas de Petri para contagem de UFC/mL. Os dados foram analisados por ANOVA e teste de Tukey (5%). Resultados: houve diminuição na adesão de microrganismos para os grupos tratados com S-PRG (p<0.05). Para SM6, os dentifrícios contendo S-PRG apresentaram resultados semelhantes ao NaF+triclosan e para a cepa UA159 o dentifrício com 30%S-PRG apresentou efeito superior. Efeito antimicrobiano no biofilme recém-formado (4h) foi observado para os grupos contendo S-PRG, mas não foi observado efeito superior ao NaF+Triclosan. Para o biofilme maduro, efeito antimicrobiano do S-PRG foi observado apenas para a cepa clínica, mas não superior ao efeito do NaF+Triclosan. Conclusão: dentifrícios contendo S-PRG foram eficazes na inibição do desenvolvimento de biofilmes de S. mutans, sendo promissores agentes para prevenir o desenvolvimento de biofilme cariogênico. (AU)

Optimal Surface Pre-Reacted Glass Filler Ratio in a Dental Varnish Effective for Inhibition of Biofilm-Induced Root Dentin Demineralization.

A unique type of dental varnish (DV) containing surface pre-reacted glass (S-PRG) fillers of different concentrations was evaluated to determine the unpresented optimal ratio for inhibiting root dentin bio-demineralization. S-PRG DVs (10% to 40%)­10%-S, 20%-S, 30%-S, and 40%-S­were applied to bovine root dentin blocks and compared with controls­0%-f (no S-PRG) and 5%-NaF (5%-NaF). The Streptococcus mutans biofilm challenge was executed inside and outside an oral biofilm reactor for 7 days. The specimens were examined using a confocal laser scanning microscope and swept-source optical coherence tomography. Furthermore, they were observed using a scanning electron microscope and analyzed using energy-dispersive X-ray spectroscopy. The roughness (SzJIS) due to leaching of DV materials and demineralization depth were significantly less in the S-PRG groups than the control groups (p < 0.05). Complete or partially plugged dentinal tubules (DTs) were observed in 20%-S, 30%-S, and 40%-S, while wide-open DTs were observed more in controls. Cylindrical tags were present in groups containing more than 20% S-PRG. F, Na, Al, and Sr were detected in a higher percentile ratio in the 20%-S, 30%-S, and 40%-S groups compared to 0%-f and 10%-S. Nonetheless, it is suggested that incorporating 20% to 30% S-PRG fillers in DVs would be effective enough as an anti-demineralization coating, together with supplementing minerals; further evaluation is required to validate these findings.

Effect of surface prereacted glass ionomer nanofillers on fluoride release, flexural strength, and surface characteristics of polymethylmethacrylate resin.

OBJECTIVE: Dentures should have proper fluoride release and physical properties. We evaluated how surface prereacted glass ionomer (S-PRG) nanofillers influenced fluoride release, flexural strength, and surface characteristics of polymethylmethacrylate (PMMA) resin. MATERIALS AND METHODS: PMMA resin disc (n = 14) and rectangular (n = 5) specimens containing 0, 20 wt% microparticles, and 20 wt% nanoparticles of S-PRG were prepared. Six-disc specimens were examined for surface roughness; eight-disc specimens were immersed in 5 ml of deionized water for 24 h before analyzing the fluoride levels on days 1-3, 12, and 15. They were recharged with 1000 ppm fluoride solution for 24 h and stored in deionized water for five cycles. Fluoride release was examined. The flexural strength of the rectangular specimens was determined using a three-point bending test. Data were analyzed by two-way repeated-measures ANOVA. RESULTS: S-PRG nanofiller had the highest fluoride exchange rate and did not significantly change the surface roughness compared with the microparticle and control groups; however, the nanofillers agglomerated and reduced the flexural strength to below 65 MPa. CONCLUSIONS: Incorporating 20 wt% nanofillers into resin enhanced the fluoride exchange property greater than microfillers at the same content, but diminished the mechanical properties of the resin. CLINICAL SIGNIFICANCE: Incorporating 20 wt% S-PRG nanofillers in resin denture base can improve the fluoride releasing property without affecting the surface roughness.

Ultrasonic irrigation of periodontal pocket with surface pre-reacted glass-ionomer (S-PRG) nanofiller dispersion improves periodontal parameters in beagle dogs.

OBJECTIVES: Surface pre-reacted glass-ionomer (S-PRG) nanofiller, an antibacterial ion-releasing bioactive glass, has been shown to adhere to tooth surfaces and reported to improve inflammatory parameters in experimental periodontitis. In this study, cementum substrate was irrigated ultrasonically with dispersion to examine in-vitro nanofiller adhesion and antibacterial activity. Moreover, periodontal pockets in a beagle dog were ultrasonically irrigated with dispersion to assess periodontal healing. METHODS: The morphology of human cementum irrigated with S-PRG nanofiller dispersion was examined by scanning electron microscopy and energy dispersive X-ray spectrometry. The antibacterial activity of the treated cementum was tested using Actinomyces naeslundii. In addition, experimentally formed periodontal pockets in beagle dog were ultrasonically irrigated with S-PRG nanofiller dispersion. Periodontal parameters (gingival index, bleeding on probing, probing pocket depth, and clinical attachment level) were measured from baseline (0 weeks) through 12 weeks. Moreover, the effects of irrigation with S-PRG nanofiller on changes in periodontal microflora and bone healing were analyzed. RESULTS: After ultrasonic irrigation, S-PRG nanofiller adhered to the cementum and exhibited antibacterial activity. The periodontal parameters were shown to improve following ultrasonic irrigation with S-PRG nanofiller dispersion. Analysis by next-generation sequencing revealed that the ratio of red-complex species decreased in the pockets irrigated with S-PRG nanofiller dispersion. In addition, the S-PRG nanofiller showed the potential to promote bone healing. CONCLUSIONS: Ultrasonic irrigation with S-PRG nanofiller dispersion using an ultrasonic scaler system permitted delivery of the S-PRG nanofiller to the root surface, providing improved parameters in experimental periodontitis and modifying the composition of subgingival periodontal microflora.

Efficacy of S-PRG filler varnishes on enamel caries remineralization.

OBJECTIVES: To evaluate the remineralizing effect of varnishes containing different concentrations of S-PRG filler or sodium fluoride on enamel caries lesions. METHODS: Enamel specimens were obtained from bovine incisors, flattened and polished. Half of the surface was protected, and artificial caries lesion was created in the unprotected area. They were assigned into six groups (n=20) according to the varnish applied: four containing S-PRG filler with different concentrations (10%, 20%, 30% and 40% w/w), one containing 5% sodium fluoride (5%NaF) as positive control, and one without treatment as a negative control (NC). Varnishes were applied on specimen's caries-affected surface and removed after 24 h. Varnish application and pH cycling (8 days) were performed twice. Cross-sectional microhardness was measured (10-100 µm depth). Knoop microhardness percentage (KHN%) of caries affected/treated area in relation to the sound enamel area at the same depth was calculated. The area under the curve (AUC) and the ΔAUC were also calculated. Statistical analysis was performed by two-way ANOVA for KHN% and one-way ANOVA for ΔAUC, followed by Tukey test (α=5%). RESULTS: Significant differences were found for the factors "treatment" (p=0.0001) and "depth" (p=0001). For the factor "treatment", the results of the Tukey test were: NC-62.2(10.3)a, 10%S-PRG-69.2(9.3)b, 20%S-PRG-71.8(9.7)bc, 30%S-PRG-74.5(9.4)c, 5%NaF-79.6(8.7)d, 40%S-PRG-85.6(8.4)e. In relation to ΔAUC, significant differences were observed among the groups (p=0.0001) and better results for 40% S-PRG and 5%NaF. CONCLUSIONS: The varnish containing 40% S-PRG fillers was the most effective to promote the enamel caries remineralization, followed by the one containing 5% sodium fluoride. CLINICAL SIGNIFICANCE: The varnish containing 40% of S-PRG fillers represents an alternative for initial enamel caries remineralization, since it was more effective than the conventional 5% NaF based product.

Effects of S-PRG filler eluate on MMP-1 and MMP-3 secretion by human gingival fibroblasts.

The aim of this study was to investigate the effects of surface reaction-type pre-reacted glass-ionomer (S-PRG) filler eluate on Matrix metalloproteinase (MMP)-1 and MMP-3 secretion by human gingival fibroblasts (HGF). The S-PRG filler eluate contains 6 ions (F, Na, Al, B, Sr and Si) released from the S-PRG filler. The S-PRG filler eluate stimulation induced a slight secretion of MMP-1 and MMP-3 by HGF. It also enhanced the phosphorylation of p38 and ERK. The increase in MMP-1 and MMP-3 secretion by the inflammatory cytokine TNF-α was suppressed by the S-PRG filler eluate. TNF-α-induced increases in the phosphorylation of ERK were slightly enhanced by S-PRG filler eluate. These findings may prompt the development of new therapeutic agents for oral inflammation with materials composed of S-PRG filler eluate.

Evaluation of the anti-inflammatory effects of surface-reaction-type pre-reacted glass-ionomer filler containing root canal sealer in lipopolysaccharide-stimulated RAW264.7 macrophages.

A prototype surface-reaction-type pre-reacted glass-ionomer (S-PRG) filler containing root canal sealer (S-PRG sealer) exhibits bioactive potential by releasing multiple ions. This study explored the suppressive effects and modes of action of S-PRG sealer extracts on proinflammatory cytokine expression in lipopolysaccharide (LPS)-stimulated RAW264.7 cells. Expression of proinflammatory cytokines was evaluated by RT-qPCR and ELISA. Expression of phosphorylated nuclear factor-kappa B (p-NF-kB) p65 was evaluated by western blotting. S-PRG sealer extracts significantly downregulated mRNA expression levels of interleukin (IL)-1α, IL-6, and TNF-α in LPS-stimulated RAW264.7 cells; the extracts also reduced the levels of IL-6 protein and p-NF-kB. In order to verify that Zn2+ was responsible for downregulation of proinflammatory cytokine expression, N,N,N',N'-tetrakis(2-pyridylmethyl) ethylenediamine (TPEN) was used as a heavy metal chelator with strong affinity for Zn2+. These effects were mitigated by TPEN. The application of ZnCl2 reproduced the actions of S-PRG sealer extracts. These data suggest that S-PRG sealer has anti-inflammatory potential involving heavy metal ions such as Zn2+.