ABSTRACT
Inspired by the iron porphyrin structure of natural horseradish peroxidase (HRP), an efficient carbon-based nanozyme was fabricated using nitrogen-doped graphene quantum dots (NGQDs) and iron ion (Fe3+) nanocomposite, enabling selective distinguishment of hydroquinone (HQ) from its isomers. NGQDs with good dispersibility and uniform size were synthesized via a one-step hydrothermal process. NGQDs lacked peroxidase-like activity but the formed nanocomposite (Fe3+-NGQDs) upon Fe3+ addition possessed high peroxidase-like activity. Fe3+-NGQDs nanocomposite exhibited shuttle-shaped structure (â¼30 nm), the lattice structure of NGQDs and electron transfer between Fe3+ and NGQDs. The Fe3+-NGQDs nanocomposite can catalyze the production of superoxide radicals (â¢O2-) from H2O2. The Michaelis constant (Km) of Fe3+-NGQDs (0.115 mM) was lower than that of natural HRP (0.434 mM) with 3,3',5,5'-tetramethylbenzidine (TMB) as the substrate and the maximum initial reaction rate (Vmax, 16.47 × 10-8 M/s) was nearly 4 times higher than that of HRP using H2O2 substrate. HQ, unlike its isomers catechol (CC) and resorcinol (RE), could consume â¢O2- generated from the decomposition of H2O2 catalyzed by Fe3+-NGQDs nanocomposite, reducing the oxidation of TMB. This principle enabled selective colorimetric determination of HQ ranged from 1 µM to 70 µM and a limit of detection (LOD) of 0.2 µM. Successful determination of HQ in pond water was also realized.
ABSTRACT
Highly thermostable RhB@Zr-Eddc composites with the Rhodamine B (RhB) enclosed into the nanocages of Zr-Eddc was synthesized by one-pot method under hydrothermal conditions, whose structure, morphology and stability were characterized through the X-ray powder diffractometry (XRD), scanning electron microscopy (SEM) and thermogravimetric analysis (TGA). RhB@Zr-Eddc showed the highly thermal stability up to 550°C and emitted the bright red-light emission at 605 nm, which could highly selective detect the nitrofurazone (NFZ) among eleven other antibiotics in aqueous solution. Furthermore, via combining the RhB@Zr-Eddc with commercial green phosphor (Y3Al5O12:Ce3+, Ga3+), the mixture was encapsulated onto a 455 nm blue LED chip, creating an ex-cellent white light emitting diode (WLED) device with the correlated colour temperature (CCT) of 4710 K, luminous efficiency (LE) of 43.17 lm/w and Color Rendering Index (CRI) of 89.2.
ABSTRACT
Detecting volatile organic compounds (VOCs) emitted from different plant species and their organs can provide valuable information about plant health and environmental factors that affect them. For example, limonene emission can be a biomarker to monitor plant health and detect stress. Traditional methods for VOC detection encounter challenges, prompting the proposal of novel approaches. In this study, we proposed integrating electrospinning, molecular imprinting, and conductive nanofibers to fabricate limonene sensors. In detail, polyvinylpyrrolidone (PVP) and polyacrylic acid (PAA) served here as fiber and cavity formers, respectively, with multiwalled carbon nanotubes (MWCNT) enhancing conductivity. We developed one-step monolithic molecularly imprinted fibers, where S(-)-limonene was the target molecule, using an electrospinning technique. The functional cavities were fixed using the UV curing method, followed by a target molecule washing. This procedure enabled the creation of recognition sites for limonene within the nanofiber matrix, enhancing sensor performance and streamlining manufacturing. Humidity was crucial for sensor working, with optimal conditions at about 50% RH. The sensors rapidly responded to S(-)-limonene, reaching a plateau within 200 s. Enhancing fiber density improved sensor performance, resulting in a lower limit of detection (LOD) of 137 ppb. However, excessive fiber density decreased accessibility to active sites, thus reducing sensitivity. Remarkably, the thinnest mat on the fibrous sensors created provided the highest selectivity to limonene (Selectivity Index: 72%) compared with other VOCs, such as EtOH (used as a solvent in nanofiber development), aromatic compounds (toluene), and two other monoterpenes (α-pinene and linalool) with similar structures. These findings underscored the potential of the proposed integrated approach for selective VOC detection in applications such as precision agriculture and environmental monitoring.
ABSTRACT
Label-free surface-enhanced Raman spectroscopy (SERS) has attracted extensive attention as an emerging technique for molecular phenotyping of biological samples. However, the selective enhancement property of SERS mediated by complicated interactions between substrates and analytes is unfavorable for molecular profiling. The electrostatic force is among the most dominating interactions that can cause selective adsorption of molecules to charged substrates. This means if only negatively- or positively-charged SERS substrates are applied, then considerable SERS information from a portion of analytes would be lost, hindering comprehensive SERS sensing. In this work, we utilize both negatively- and positively-charged colloidal silver (Ag) nanoparticles (NPs) to detect various charged molecules. The negatively-charged citrate-stabilized Ag and the positively-charged Ag prepared via a cetyltrimethyl-ammonium chloride-based charge reversal protocol have been adopted as SERS substrates. The Ag NPs are all relatively well-dispersed with good uniformity. After applying the oppositely-charged NPs to the detection of charged molecules, we find the SERS results explicitly demonstrate the electrostatically-driven SERS selective enhancement, which is further supported and clarified by molecular electrostatic potential calculations. Our work highlights the importance of developing SERS substrates modified with appropriate surface charges for various analytes, and enlightens us that potentially more molecular SERS information can be acquired from complex bio-samples using combinations of oppositely-charged substrates.
Subject(s)
Metal Nanoparticles , Silver , Static Electricity , Ions/chemistry , Silver/chemistry , Metal Nanoparticles/chemistry , Metal Nanoparticles/ultrastructure , Surface Properties , Spectrum Analysis, Raman , Molecular Conformation , Models, MolecularABSTRACT
In situ monitoring of intracellular microRNAs (miRNAs) often encounters the challenges of surrounding complexity, coexistence of precursor miRNAs (pre-miRNAs) and the degradation of biological enzyme in living cells. Here, we designed a novel probe encapsulated DNA tetrahedral molecular sieve (DTMS) to realize the size-selective detection of intracellular miRNA 21 that can avoid the interference of pre-miRNAs. In such strategy, quencher (BHQ-1) labeled probe DNA (S6-BHQ 1) was introduced into the inner cavity of fluorophore (FAM) labeled DNA tetrahedral scaffolds (DTS) to prepare DTMS, making the FAM and BHQ-1 closely proximate, and resulting the sensor in a "signal-off" state. In the presence of miRNA 21, strand displacement reaction happened to form more stable DNA double-stranded structure, accompanied by the release of S6-BHQ 1 from the inner cavity of DTMS, making the sensor in a "signal-on" state. The DTMS based sensing platform can then realized the size-selective detection of miRNA 21 with a detection limit of 3.6 pM. Relying on the mechanical rigidity of DTS and the encapsulation of DNA probe using DTMS, such proposed method achieved preferable reproducibility and storage stability. Moreover, this sensing system exhibited good performance for monitoring the change of intracellular miRNA 21 level during the treatment with miRNA-related drugs, demonstrating great potential for biological studies and accurate disease diagnosis.
Subject(s)
DNA , Fluorescent Dyes , MicroRNAs , MicroRNAs/analysis , Humans , DNA/chemistry , Fluorescent Dyes/chemistry , Spectrometry, Fluorescence/methods , Limit of Detection , DNA Probes/chemistry , DNA Probes/genetics , Fluorescence , Biosensing Techniques/methods , Particle SizeABSTRACT
Solid-state (SS-) nanopore sensing has gained tremendous attention in recent years, but it has been constrained by its intrinsic lack of selectivity. To address this, we previously established a novel SS-nanopore assay that produces translocation signals only when a target biotinylated nucleic acid fragment binds to monovalent streptavidin (MS), a protein variant with a single high-affinity biotin-binding domain. While this approach has enabled selective quantification of diverse nucleic acid biomarkers, sensitivity enhancements are needed to improve the detection of low-abundance translational targets. Because the translocation dynamics that determine assay efficacy are largely governed by constituent charge characteristics, we here incorporate a polyhistidine-tagged MS (hMS) to alter the component detectability. We investigate the effects of buffer pH, salt concentration, and SS-nanopore diameter on the performance with the alternate reagent, achieve significant improvements in measurement sensitivity and selectivity, and expand the range of device dimensions viable for the assay. We used this improvement to detect as little as 1 nM miRNA spiked into human plasma. Overall, our findings improve the potential for broader applications of SS-nanopores in the quantitative analyses of molecular biomarkers.
Subject(s)
Histidine , Nanopores , Nucleic Acids , Humans , Streptavidin/chemistry , BiomarkersABSTRACT
Optimizing materials and associated structures for detecting various environmental gas pollutant concentrations has been a major challenge in environmental sensing technology. Semiconducting metal oxides (SMOs) fabricated at the nanoscale are a class of sensor technology in which metallic species are functionalized with various dopants to modify their chemiresistivity and crystalline scaffolding properties. Studies focused on recent advances of gas sensors utilizing metal oxide nanostructures with a special emphasis on the structure-surface property relationships of some typical n-type and p-type SMOs for efficient gas detection are presented. Strategies to enhance the gas sensor performances are also discussed. These oxide material sensors have several advantages such as ease of handling, portability, and doped-based SMO sensing detection ability of environmental gas pollutants at low temperatures. SMO sensors have displayed excellent sensitivity, selectivity, and robustness. In addition, the hybrid SMO sensors showed exceptional selectivity to some CWAs when irradiated with visible light while also displaying high reversibility and humidity independence. Results showed that TiO2 surfaces can sense 50 ppm SO2 in the presence of UV light and under operating temperatures of 298-473 K. Hybrid SMO displayed excellent gas sensing response. For example, a CuO-ZnO nanoparticle network of a 4:1 vol.% CuO/ZnO ratio exhibited responses three times greater than pure CuO sensors and six times greater than pure ZnO sensors toward H2S. This review provides a critical discussion of modified gas pollutant sensing capabilities of metal oxide nanoparticles under ambient conditions, focusing on reported results during the past two decades on gas pollutants sensing.
ABSTRACT
A facile cost-effective green synthesis approach has been used to synthesize carbon-dot (CDs) from the Kernel part of theAzadirachta Indicaseeds and investigated their fluorescent and metal ions sensing capability and also used for the delivery of drugs. Metallic ions such as Ca2+, K+, Na+, Fe3+,and Zn2+which are biologically important for many reactions and are selectively detected through the novel CDs. The resultant dot size of CDs (â¼4 nm) is useful to eliminate the 'Achilles heel' problems, which is associated with the Zn2+in the body and its detection is a very challenging task. It is found that the sensitivity of CDs for the detection of Zn2+can be regulated by using different solvents. These CDs can also be used as a sensing probe for the selective detection of Fe3+at a very low concentration of solution (â¼5 µM). The synthesis method of CDs reported here is cost-effective, very fast and it is highly selective towards Fe3+and Zn2+. Due to the fast response capability of these CDs, logic gate operation is achieved and it provides a new understanding to construct potential next-generation molecular devices for the detection of different biomolecules with high selectivity. Additionally, these CDs are biocompatible against normal healthy cells, capable of loading small biomolecules and drugs due to their porous nature, and exhibited potential impact for breast cancer therapy. It is observed that a significant synergic therapeutic effect of CDs loaded with doxorubicin against breast cancer cells is very promising. Thus, the CDs reported herein in this work have been synthesized through a green synthesis approach and can be used as a molecular probe for the detection of metal ions as well as for drug delivery applications.
Subject(s)
Breast Neoplasms , Quantum Dots , Humans , Female , Carbon , Cost-Benefit Analysis , Metals , Fluorescent Dyes , IonsABSTRACT
The design of surface ligands is crucial for ligand-protected gold nanoparticles (AuNPs). Herein, following the principle of green synthesis, environmentally friendly gold nanoparticles (AuNPs@His@CC, AuHC) were fabricated based on dual ligands of histidine and carboxylated chitosan. AuHC showed the advantages of low toxicity, good photoluminescent stability and ideal biocompatibility. Compared with single histidine-coated gold nanoclusters (AuNCs@His, AuH), AuHC presented enhanced fluorescence attributed to the addition of chitosan. The blue-emitting AuHC has a unique response to Fe3+ with detection limits as low as 9.51 nM. Interestingly, the quenched fluorescence of AuHC-Fe3+ system could be restored through the introduction of PPi with a detection limit of 10.6 µM. So an "on-off-on" fluorescence sensing platform was achieved. Apart from good optical properties and sensing, the designed AuHC demonstrated outstanding photothermal conversion efficiency (27.8 %), which made it ideal material for thermal ablation of tumor. To be specific, after laser irradiation (660 nm, 0.78 W cm-2, 10 min) of AuHC, the survival rate of HeLa cells as a tumor cell model decreased to 12.7 %, indicating that AuHC has a significant tumor inhibition effect in vitro. Besides, AuHC also could be a befitting candidate for overcoming drug-resistant tumor cells such as MCF-7/ADR cells. Notably, AuHC can markedly ablate solid tumors in 4T1 tumor-bearing mice after laser irradiation (660 nm, 0.78 W cm-2, 10 min). Hence this work provides insight into the design of multifunctional AuNPs platform for simultaneously integrating the ion sensing and photothermal therapy of cancer.
Subject(s)
Chitosan , Metal Nanoparticles , Humans , Animals , Mice , Photothermal Therapy , Gold , Fluorescence , HeLa Cells , HistidineABSTRACT
Alendronate-functionalized graphene quantum dots (ALEN-GQDs) with a quantum yield of 57% were synthesized via a two-step route: preparation of graphene quantum dots (GQDs) by pyrolysis method using citric acid as the carbon source and post functionalization of GQDs via a hydrothermal method with alendronate sodium. After careful characterization of the obtained ALEN-GQDs, they were successfully employed as sensing materials with superior selectivity and sensitivity for the detection of nanomolar levels of arsenic ions (As(III)). According to the mechanistic investigation, arsenic ions can quench the fluorescence intensity of ALEN-GQDs through metal-ligand interaction between the As(III) ions and the surface functional groups of the fluorescent probe. This probe provided a rapid method to monitor As(III) with a wide detection range (44 nM-1.30 µM) and a low detection limit of 13 nM. Finally, to validate the applicability, this novel fluorescent probe was successfully applied for the quantitative determination of As(III) in rice and water samples.
Subject(s)
Arsenic , Graphite , Quantum Dots , Fluorescent Dyes , Alendronate , Spectrometry, Fluorescence/methods , IonsABSTRACT
At present, the fast distinction of different metal ions in pure water media is not only a great challenge, but also drives the protection of water quality in environmental water bodies. In this paper, a novel ionic liquid fluorescent probe Glycolic Acid-L-Arginine (GA-L-Arg) was rationally created and designed through an in-depth study of ionic liquids. It is also used as an innovative multi-ion fluorescent probe for colorimetric detection and separate identification of Fe3+ and Co2+ in aqueous solutions of various metal ions. GA-L-Arg has excellent water solubility due to the strong hydrophilicity of Glycolic Acid and L-Arginine. The probe showed high sensitivity, extremely significant selectivity, and great pH stability for Fe3+ and Co2+ in pure water. The GA-L-Arg structure and the mechanism of Fe3+ and Co2+ detection were analyzed by infrared spectroscopic characterization and quantum chemical calculations. More importantly, the distinct colorimetric partitioning of Fe3+ and Co2+ was performed by the unique extraction of Fe3+ in the presence of the fluorescent probe and buffer solution.
Subject(s)
Glycolates , Ionic Liquids , Fluorescent Dyes/chemistry , Colorimetry/methods , Metals/chemistry , Ions , ArginineABSTRACT
Silver nanocubes monolayer-modified polydimethylsiloxane (Ag NC/PDMS) flexible SERS substrates have been prepared by a three-phase interface self-assembly procedure. The combination of this method with membrane technology brings nanoparticles in close proximity, densely, and regularly arranged in monolayers over a large area, leading to excellent SERS properties. Considering the complexity of practical detection, molecular imprinted polymers (MIPs) were anchored on the surface of SERS substrate and applied to selective detection of microcystin-LR (MC-LR). It is worth mentioning that the SERS imprinted membranes (AP-MIMs) were still clearly detected at a concentration of 0.1 µg·L-1 of MC-LR in drinking water, and the detection limit was as low as 0.0067 µg·L-1. The substrate exhibited excellent uniformity with a relative standard deviation (RSD) of 6.1%. In the presence of interference molecules, AP-MIMs exhibited excellent selectivity for MC-LR. Furthermore, in the spiking and recovery tests of practical lake water samples, the method showed excellent recoveries ranging from 96.47 to 105.31%. It has been demonstrated that the prepared AP-MIMs can be applied to sensitive and specific detection of trace amounts of MC-LR in drinking water.
Subject(s)
Drinking Water , Metal Nanoparticles , Fresh Water , Microcystins , Metal Nanoparticles/chemistryABSTRACT
Since Hydrogen Sulfide (H2S) was recognized as a gas transmitter, its detection and quantification have become a hot research topic among chemists and biologists. In this area, fluorescent probes have shown great advantages: fast and strong response, low detection limit and easy manipulation. Here we developed a new fluorescent probe that detected H2S selectively among various bioactive and inorganic salts. This probe was based on the core structure of fluorescein and reacted with H2S through azide-reduction. Great linearity was achieved correlating fluorescence intensity and H2S concentrations in solution. The detection of H2S in cancer cells was also achieved.
Subject(s)
Fluorescent Dyes , Hydrogen Sulfide , Fluorescein , Azides , Hydrogen-Ion ConcentrationABSTRACT
In chronic hepatitis B (CHB) patients, quantification of HBV pgRNA in plasma has the potential to provide information on disease prognosis and liver injury or histopathology. However, current methods for detecting HBV pgRNA present technical difficulties due to the co-existence of HBV DNA in plasma samples. We have successfully established a novel one-step RT-PCR assay that allows selective quantification of HBV pgRNA. Two cohorts of participants were recruited for assay validation, including treatment-naïve patients with CHB and HBeAg-positive CHB patients who were treated with Tenofovir and monitored for 6 months to assess the predictive value of baseline HBV RNA for HBeAg seroclearance. Statistical analysis was performed using MedCalc version 20.019 software. The novel selective one-step RT-PCR assay for detecting HBV pgRNA was validated with a limit of detection of 100 copies/mL. The assay was able to selectively measure HBV pgRNA even in the presence of excess HBV rcDNA. In treatment-naïve CHB patients, HBV pgRNA levels were significantly lower than HBV DNA concentration. Serum HBV DNA levels and HBeAg status were positively associated with HBV pgRNA. Baseline serum HBV pgRNA levels were found to be strong predictors of HBeAg seroclearance after 6 months of Tenofovir treatment. The study presents a novel RT-PCR assay that allows accurate measurement of plasma HBV pgRNA in chronic hepatitis B patients, even in the presence of excess HBV DNA. The assay is highly selective and represents a significant advancement with potential for further breakthroughs in understanding the clinical significance of HBV pgRNA.
Subject(s)
Hepatitis B virus , Hepatitis B, Chronic , Humans , Hepatitis B virus/genetics , Hepatitis B, Chronic/diagnosis , Hepatitis B, Chronic/drug therapy , Reverse Transcriptase Polymerase Chain Reaction , Hepatitis B e Antigens , DNA, Viral/genetics , RNA , Tenofovir/therapeutic use , Genomics , Antiviral AgentsABSTRACT
Cyantraniliprole is one of the anthranilic diamide insecticides widely used in the agriculture sector. Due to its low toxicity and relatively fast degradation, there is need for a sensitive determination method for its residues. Nowadays, there is growing interest in the development of enzyme-based biosensors. The major drawback is the non-specific binding of many insecticides to the enzyme. This work employs Molecularly imprinted polymers (MIPs) to increase enzyme specificity and eliminate the organic solvent effect on the enzyme activity. The synthesized Cyan-Molecularly imprinted polymers (Cyan-MIP) possesses high affinity and selectivity toward cyantraniliprole. Acetylcholinesterase assay characteristics including enzyme concentration, substrate concentration, DTNB concentration, and acetonitrile concentration were optimized. Under optimal experimental conditions, the developed MIP-Acetylcholinesterase (MIP-AchE) inhibition-based sensor provides better precision than the AchE inhibition-based sensor with a wide linear range (15-50â ppm), limit of detection (LOD) 4.1â ppm, and limit of quantitation (LOQ) 12.6â ppm. The sensor was successfully applied for cyantraniliprole determination in spiked melon, giving satisfactory recoveries.
Subject(s)
Biosensing Techniques , Insecticides , Molecular Imprinting , Insecticides/analysis , Molecularly Imprinted Polymers , Acetylcholinesterase , Polymers/chemistry , Molecular Imprinting/methodsABSTRACT
With the recently increasing prevalence of deep learning, both academia and industry exhibit substantial interest in neuromorphic computing, which mimics the functional and structural features of the human brain. To realize neuromorphic computing, an energy-efficient and reliable artificial synapse must be developed. In this study, the synaptic ferroelectric field-effect-transistor (FeFET) array is fabricated as a component of a neuromorphic convolutional neural network. Beyond the single transistor level, the long-term potentiation and depression of synaptic weights are achieved at the array level, and a successful program-inhibiting operation is demonstrated in the synaptic array, achieving a learning accuracy of 79.84% on the Canadian Institute for Advanced Research (CIFAR)-10 dataset. Furthermore, an efficient self-curing method is proposed to improve the endurance of the FeFET array by tenfold, utilizing the punch-through current inherent to the device. Low-frequency noise spectroscopy is employed to quantitatively evaluate the curing efficiency of the proposed self-curing method. The results of this study provide a method to fabricate and operate reliable synaptic FeFET arrays, thereby paving the way for further development of ferroelectric-based neuromorphic computing.
ABSTRACT
Herein, gold nanoclusters (AuNCs@EW@Lzm, AuEL) with the bright red fluorescence at 650 nm were prepared by egg white and lysozyme as double protein ligands, which exhibited good stability and high biocompatibility. The probe displayed highly selective detected pyrophosphate (PPi) based on Cu2+-mediated AuEL fluorescence quenching. Specifically, the fluorescence of AuEL was quenched once the Cu2+/Fe3+/Hg2+ is added to chelate with amino acids on the AuEL surface, respectively. Interestingly, the fluorescence of quenched AuEL-Cu2+ was significantly recovered by PPi, but not the other two. This phenomenon was attributed to the stronger bond between PPi and Cu2+ than that of Cu2+ with AuEL nanoclusters. The results demonstrated a good linear relationship between PPi concentration and the relative fluorescence intensity of AuEL-Cu2+ in the range of 131.00-685.40 µM with a detection limit of 2.56 µM. In addition, the quench AuEL-Cu2+ system can also be recovered in acidic environments (pH ≤ 5). And the as-synthesized AuEL showed excellent cell imaging and target the nucleus. Thus the fabrication of AuEL offers a facile strategy for efficient PPi assay and offers the potential for drug/gene delivery to the nucleus.
Subject(s)
Diphosphates , Gold , Copper , Amino AcidsABSTRACT
Concerns about indoor and outdoor air quality, industrial gas leaks, and medical diagnostics are driving the demand for high-performance gas sensors. Owing to their structural variety and large surface area, reducible metal oxides hold great promise for constructing a gas-sensing system. While many earlier reports have successfully obtained a sufficient response to various types of target gases, the selective detection of target gases remains challenging. In this work, a novel method, low-frequency noise (LFN) spectroscopy is presented, to achieve selective detection using a single FET-type gas sensor. The LFN of the sensor is accurately modeled by considering the charge fluctuation in both the sensing material and the FET channel. Exposure to different target gases produces distinct corner frequencies of the power spectral density that can be used to achieve selective detection. In addition, a 3D vertical-NAND flash array is used with the fast Fourier transform method via in-memory-computing, significantly improving the area and power efficiency rate. The proposed system provides a novel and efficient method capable of selectively detecting a target gas using in-memory-computed LFN spectroscopy and thus paving the way for the further development in gas sensing systems.
ABSTRACT
The innovative technology of a marketable lab-on-a-chip platform for point-of-care (POC) in vitro detection has recently attracted remarkable attention. The POC tests can significantly enhance the high standard of medicinal care. In the last decade, clinical diagnostic technology has been broadly advanced and successfully performed in several areas. It seems that lab-on-a-chip approaches play a significant role in these technologies. However, high-cost and time-consuming methods are increasing the challenge and the development of a cost-effective, rapid and efficient method for the detection of biomolecules is urgently needed. Recently, polymer-coated sensing platforms have been a promising area that can be employed in medical diagnosis, pharmaceutical bioassays, and environmental monitoring. The designed on-chip sensors are based on molecular imprinting polymers (MIPs) that use label-free detection technology. Molecular imprinting shines out as a potentially promising technique for creating artificial recognition material with molecular recognition sites. MIPs provide unique advantages such as excellent recognition specificity, high selectivity, and good reusability. This review article aims to define several methods using molecular imprinting for biomolecules and their incorporation with several lab-on-chip technologies to describe the most promising methods for the development of sensing systems based on molecularly imprinted polymers. The higher selectivity, more user-friendly operation is believed to provide MIP-based lab-on-a-chip devices with great potential academic and commercial value in on-site clinical diagnostics and other point-of-care assays.
Subject(s)
Biosensing Techniques , Molecular Imprinting , Molecular Imprinting/methods , Biosensing Techniques/methods , Point-of-Care Testing , Point-of-Care Systems , Polymers/metabolismABSTRACT
A fluorescence ''turn-on'' probe, namely, TTA-SBA-15, for the selective detection of water (H2O) was designed by grafting terthiophene fluorophore onto ethylenediamine functionalized mesoporous SBA-15 silica. The maximum fluorescence emission peak of TTA-SBA-15 ranged from 462 nm (toluene) to 525 nm (methanol) in various organic solvents. No fluorescence was observed in H2O due to the donor-excited photoinduced electron transfer mechanism, in which terthiophene acted as the donor and the amino group acted as the acceptor. Upon adding trace amounts of H2O into the TTA-SBA-15 suspensions dispersed in various organic solvents, TTA-SBA-15 was successfully applied as a ''turn-on'' fluorescent probe for the quantitative determination of trace H2O in organic solvents with high sensitivity and low detection limit. To demonstrate the selective detection mechanism of TTA-SBA-15 for H2O, the fluorescent spectra of two control materials (TT-SBA-15 and PyA-SBA-15) were also investigated in H2O and various organic solvents. The experimental results indicated that the terthiophene fluorophore and amine functional group on TTA-SBA-15 contributed to the H2O selectivity, highlighting the structure-activity relationships in developing organic functionalized mesoporous silica for potential applications.