Characterizations on a GRAS Electrospun Lipid-Polymer Composite Loaded with Tetrahydrocurcumin.

Electrospun/sprayed fiber films and nanoparticles were broadly studied as encapsulation techniques for bioactive compounds. Nevertheless, many of them involved using non-volatile toxic solvents or non-biodegradable polymers that were not suitable for oral consumption, thus rather limiting their application. In this research, a novel electrospun lipid-polymer composite (ELPC) was fabricated with whole generally recognized as safe (GRAS) materials including gelatin, medium chain triglyceride (MCT) and lecithin. A water-insoluble bioactive compound, tetrahydrocurcumin (TC), was encapsulated in the ELPC to enhance its delivery. Confocal laser scanning microscopy (CLSM) was utilized to examine the morphology of this ELPC and found that it was in a status between electrospun fibers and electrosprayed particles. It was able to form self-assembled emulsions (droplets visualized by CLSM) to deliver active compounds. In addition, this gelatin-based ELPC self-assembled emulsion was able to form a special emulsion gel. CLSM observation of this gel displayed that the lipophilic contents of the ELPC were encapsulated within the cluster of the hydrophilic gelatin gel network. The FTIR spectrum of the TC-loaded ELPC did not show the fingerprint pattern of crystalline TC, while it displayed the aliphatic hydrocarbon stretches from MCT and lecithin. The dissolution experiment demonstrated a relatively linear release profile of TC from the ELPC. The lipid digestion assay displayed a rapid digestion of triglycerides in the first 3-6 min, with a high extent of lipolysis. A Caco-2 intestinal monolayer transport study was performed. The ELPC delivered more TC in the upward direction than downwards. MTT study results did not report cytotoxicity for both pure TC and the ELPC-encapsulated TC under 15 µg/mL. Caco-2 cellular uptake was visualized by CLSM and semi-quantified to estimate the accumulation rate of TC in the cells over time.

Noncovalent Interactions-Driven Self-Assembly of Polyanionic Additive for Long Anti-Calendar Aging and High-Rate Zinc Metal Batteries.

Zinc anodes of zinc metal batteries suffer from unsatisfactory plating/striping reversibility due to interfacial parasitic reactions and poor Zn2+ mass transfer kinetics. Herein, methoxy polyethylene glycol-phosphate (mPEG-P) is introduced as an electrolyte additive to achieve long anti-calendar aging and high-rate capabilities. The polyanionic of mPEG-P self-assembles via noncovalent-interactions on electrode surface to form polyether-based cation channels and in situ organic-inorganic hybrid solid electrolyte interface layer, which ensure rapid Zn2+ mass transfer and suppresses interfacial parasitic reactions, realizing outstanding cycling/calendar aging stability. As a result, the Zn//Zn symmetric cells with mPEG-P present long lifespans over 9000 and 2500 cycles at ultrahigh current densities of 120 and 200 mA cm-2, respectively. Besides, the coulombic efficiency (CE) of the Zn//Cu cell with mPEG-P additive (88.21%) is much higher than that of the cell (36.4%) at the initial cycle after the 15-day calendar aging treatment, presenting excellent anti-static corrosion performance. Furthermore, after 20-day aging, the Zn//MnO2 cell exhibits a superior capacity retention of 89% compared with that of the cell without mPEG-P (28%) after 150 cycles. This study provides a promising avenue for boosting the development of high efficiency and durable metallic zinc based stationary energy storage system.

Recent Advances in Carbazole-Based Self-Assembled Monolayer for Solution-Processed Optoelectronic Devices.

Self-assembled molecules (SAMs) have shown great potential in the application of optoelectronic devices due to their unique molecular properties. Recently, emerging phosphonic acid-based SAMs, 2-(9Hcarbazol-9-yl)ethyl]phosphonic acid (2PACz), have successfully applied in perovskite solar cells (PSCs), organic solar cells (OSCs) and perovskite light emitting diodes (PeLEDs). More importantly, impressive results based on 2PACz SAMs are reported recently in succession. Therefore, it is essential to provide an insightful summary to promote it further development. In this review, the molecule design strategies about 2PACz are first concluded. Subsequently, this work systematically reviews the recent advances of 2PACz and its derivatives for single junction PSCs, tandem PSCs, OSCs and PeLEDs. Finally, this work concludes and discusses future challenges for 2PACz and its derivatives to further develop in optoelectronic devices.

A Visible-Light Regulated ATP Transport in Retinal-Modified Pillar[6]arene Layer-by-Layer Self-Assembled Sub-Nanochannel.

Natural light-responsive rhodopsins play a critical role in visual conversion, signal transduction, energy transmission, etc., which has aroused extensive interest in the past decade. Inspired by these gorgeous works of living beings, scientists have constructed various biomimetic light-responsive nanochannels to mimic the behaviors of rhodopsins. However, it is still challenging to build stimuli-responsive sub-nanochannels only regulated by visible light as the rhodopsins are always at the sub-nanometer level and regulated by visible light. Pillar[6]arenes have an open cavity of 6.7 Å, which can selectively recognize small organic molecules. They can be connected to ions of ammonium or carboxylate groups on the rims. Therefore, we designed and synthesized the amino and carboxyl-derived side chains of pillar[6]arenes with opposite charges. The sub-nanochannels were constructed through the electrostatic interaction of layer-by-layer self-assembled amino and carboxyl-derived pillar[6]arenes. Then, the natural chromophore of the retinal with visible light-responsive performance was modified on the upper edge of the sub-nanochannel to realize the visible light switched on and off. Finally, we successfully constructed a visible light-responsive sub-nanochannel, providing a novel method for regulating the selective transport of energy-donating molecules of ATP.

Glycol Monomethyl Ether-Substituted Carbazolyl Hole-Transporting Material for Stable Inverted Perovskite Solar Cells with Efficiency of 25.52 .

Organic self-assembled molecules (OSAMs) based hole-transporting materials play a pivotal role in achieving highly efficient and stable inverted perovskite solar cells (IPSCs). However, the reported carbazol-based OSAMs have serious drawbacks, such as poor wettability for perovskite solution spreading due to the nonpolar surface, worse matched energy arrangement with perovskite, and limited molecular species, which greatly limit the device performance. To address above problems, a novel OSAM [4-(3,6-glycol monomethyl ether-9H-carbazol-9-yl) butyl]phosphonic acid (GM-4PACz) was synthesized as hole-transporting material by introducing glycol monomethyl ether (GM) side chains at carbazolyl unit. GM groups enhance the surface energy of Indium Tin Oxide (ITO)/SAM substrate to facilitate the nucleation and growth of up perovskite film, suppress cation defects, release the residual stress at SAM/perovskite interface, and evaluate energy level for matching with perovskite. Consequently, the GM-4PACz based IPSC achieves a champion PCE of 25.52 %, a respectable open-circuit voltage (VOC) of 1.21 V, a high stability, possessing 93.29 % and 91.75 % of their initial efficiency after aging in air for 2000 h or tracking at maximum power point for 1000 h, respectively.

A Transformable Specific-Responsive Peptide for One-Step Synergistic Therapy of Bladder Cancer.

Synergistic therapy has shown greater advantages compared with monotherapy. However, the complex multiple-administration plan and potential side effects limit its clinical application. A transformable specific-responsive peptide (TSRP) is utilized to one-step achieve synergistic therapy integrating anti-tumor, anti-angiogenesis and immune response. The TSRP is composed of: i) Recognition unit could specifically target and inhibit the biological function of FGFR-1; ii) Transformable unit could self-assembly and trigger nanofibers formation; iii) Reactive unit could specifically cleaved by MMP-2/9 in tumor micro-environment; iv) Immune unit, stimulate the release of immune cells when LTX-315 (Immune-associated oncolytic peptide) exposed. Once its binding to FGFR-1, the TSRP could cleaved by MMP-2/9 to form the nanofibers on the cell membrane, with a retention time of up to 12 h. Through suppressing the phosphorylation levels of ERK 1/2 and PI3K/AKT signaling pathways downstream of FGFR-1, the TSRP significant inhibit the growth of tumor cells and the formation of angioginesis. Furthermore, LTX-315 is exposed after TSRP cleavage, resulting in Calreticulin activation and CD8+ T cells infiltration. All above processes together contribute to the increasing survival rate of tumor-bearing mice by nearly 4-folds. This work presented a unique design for the biological application of one-step synergistic therapy of bladder cancer.

A Self-Assemble Supramolecular Film with Humidity Visualization Enabled by Clusteroluminescence.

Clusteroluminescence (CL) has recently gained significant attention due to its unique through-space interactions associated with a high dependence on the aggregation of subgroups. These distinct features could easily transform the stimuli into visual fluorescence and monitor the fluctuation of the environment but have not received sufficient attention before. In this work, supramolecular films are designed based on the neutralization reaction of anhydride groups and the self-assembly of dynamic covalent disulfide bonds in NaOH aqueous solution. The self-assembly of hydrophilic carboxylate chromophores and hydrophobic disulfide-containing five-membered rings could be observed by the variation of the aggregation state of carboxylate in CL. Furthermore, the dynamic cross-linking films obtained with water-sensitive carboxylate chromophores could alter the aggregation distance stimulated by surrounding water vapor, causing the emission wavelength to change from 534 to 508 nm by varying the relative humidity. This work not only provides an approach to monitor the self-assembly of clusteroluminogens but also offers new strategies for designing stimuli-responsive materials that utilize the intrinsic features of CL.

Fatty acid modification of casein bioactive peptides nano-assemblies, synthesis, characterization and anticarcinogenic effect.

In this study, the nano-assemblies of bovine casein hydrolyzed peptides (HP) modified by fatty acids with various alkyl chain lengths (C8, C10, C12 and C14) were synthesized. The physicochemical properties of HP-C8-HP-C14 nano-assemblies were characterized using spectra, laser particle size analyzer, contact angle meter, scanning electron microscope (SEM) and cryo-transmission electron microscope (Cryo-TEM). HP-C8 and HP-C10 self-assembled into a hollow cube cage with an average size of ~500 nm, and the assembly of HP-C12 showed a flower-shaped morphology with more dispersed behavior, and droplet size was observed as ~20 nm. The in vitro cytotoxicity against human breast cancer cells MCF-7 was tested using CCK-8 assay and flow cytometry analysis. HP-C12 showed the highest cytotoxicity for MCF-7 cells with an inhibition rate of 66.03 % ± 0.35 % with an IC50 value of 7.4 µM among HP-Cn. HP-C8, HP-C10 and HP-C12 significantly affected on the migration, invasion and apoptosis of MCF-7 cells. The apoptosis mechanism may depend on the upregulation of anti-apoptotic protein Bcl-2 as well as pro-apoptotic proteins Bax and caspase-8. The dead MCF-7 cells were analyzed with UHPLC-MS/MS using untargeted metabolomics, revealing key metabolic pathways.

Progress in Programmable DNA-Aided Self-Assembly of the Master Frame of a Drug Delivery System.

Every year cancer causes approximately 10 million deaths globally. Researchers have developed numerous targeted drug delivery systems (DDSs) with nanoparticles, polymers, and liposomes, but these synthetic materials have poor degradability and low biocompatibility. Because DNA nanostructures have good degradability and high biocompatibility, extensive studies have been performed to construct DDSs with DNA nanostructures as the molecular-layer master frame (MF) assembled via programmable DNA-aided self-assembly for targeted drug release. To learn the progressing trend of self-assembly techniques and keep pace with their recent rapid advancements, it is crucial to provide an overview of their past and recent progress. In this review article, we first present the techniques to assemble the MF of a DDS with solely DNA strands; to assemble MFs with one or more additional type of construction materials, e.g., polymers (including RNA and protein), inorganic nanoparticle, or metal ions, in addition to DNA strands; and to assemble the more complex DNA nanocomplexes. It is observed that both the techniques used and the MFs constructed have become increasingly complex and that the DDS constructed has an increasing number of advanced functions. From our focused review, we anticipate that DDSs with the MF of multiple building materials and DNA nanocomplexes will attract an increasing number of researchers' interests. On the basis of knowledge about materials and functional components (e.g., targeting aptamers/peptides/antibodies and stimuli for drug release) obtained from previously performed studies, researchers can combine more materials with DNA strands to assemble more powerful MFs and incorporate more components to endow DDSs with improved or additional properties/functions, thereby subsequently contributing to cancer prevention.

A gel-forming α-MSH analog promotes lasting melanogenesis.

The α-MSH peptide plays a significant role in the regulation of pigmentation via the melanocortin 1 receptor (MC1R). It increases the DNA repair capacity of melanocytes and reduces the incidence of skin cancers. As such, α-MSH analogs could have the utility for protecting against UV-induced skin DNA damage in susceptible patients. Recently, α-MSH analogs have been approved for the treatment of erythropoietic protoporphyria, hypoactive sexual desire, or pediatric obesity. However, the delivery of these drugs requires inconvenient implants or frequent injections. We recently found that select palmitoylated melanocortin analogs such as afamelanotide and adrenocorticotropin peptides self-assemble to form liquid gels in situ. To explore the utility of these novel analogs, we studied their pharmacological characteristics in vitro and in vivo. Acylated afamelanotide (DDE 313) and ACTH1-24 (DDE314) analogs form liquid gels at 6-20% and have a significantly increased viscosity at >2.5% compared to original analogs. Using the DDE313 analog as a prototype, we showed gel-formation reduces the passage of DDE313 through Centricon filters, and subcutaneous injection of analog gel in rats leads to the sustained presence of the peptide in circulation for >12 days. In addition, DDE313 darkened the skin of frogs for >4 weeks, whereas those injected with an equivalent dose of afamelanotide lost the tanning response within a few days. Because self-assembled gels allow sustained activation of melanocortin receptors, further studies of these analogs may allow the development of effective and convenient tanning therapies to prophylactically protect against UV-induced malignant transformation of skin cells in susceptible patients.

A novel self-assembled nanoplatform based on retrofitting poloxamer 188 for triple-negative breast cancer targeting treatment.

Poloxamer 188 is a widely used pharmaceutical excipient, which can be found in a variety of drug formulations. In this study, a novel self-assembled nanoplatform was developed for active targeting of folate receptor-overexpressing triple-negative breast cancer. This platform, FPP NPs, was prepared by the retrofitted poloxamer 188 derivatives, resulting in nanoparticles with an appropriate size (< 100 nm), good stability, and satisfactory biocompatibility. Cellular uptake and in vivo distribution studies showed that the FPP NPs had strong tumor cell uptake and active targeting capabilities. Furthermore, docetaxel (DTX) was loaded into FPP NPs in this research. The resulting DTX/FPP NPs exhibited high drug encapsulation efficiency and drug loading capacity, and could rapidly release DTX under slightly acidic conditions, significantly increasing the antitumor activity of the encapsulated drug both in vitro and in vivo. In addition, DTX/FPP NPs could significantly decrease the hepatotoxicity and nephrotoxicity of DTX. Therefore, this drug delivery nanoplatform, based on retrofitted poloxamer 188 with self-assembly properties in aqueous solution and active targeting capabilities to tumors, may provide a promising approach for targeted treatment of triple-negative breast cancer.

Self-Assembled 2D VS2 /Ti3 C2 Tx MXene Nanostructures with Ultrafast Kinetics for Superior Electrochemical Sodium-Ion Storage.

Constructing nanostructures with high structural stability and ultrafast electrochemical reaction kinetics as anodes for sodium-ion batteries (SIBs) is a big challenge. Herein, the robust 2D VS2 / Ti3 C2 Tx MXene nanostructures with the strong Ti─S covalent bond synthesized by a one-pot self-assembly approach are developed. The strong interfacial interaction renders the material of good structural durability and enhanced reaction kinetics. Meanwhile, the enlarged and few-layered MXene nanosheets can be easily obtained according to this interaction, providing a conductive network for sufficient electrolyte penetration and rapid charge transfer. As predicted, the VS2 /MXene nanostructures exhibit an extremely low sodium diffusion barrier confirmed by DFT calculations and small charge transfer impedance evidenced by electrochemical impedance spectroscopy (EIS) analysis. Therefore, the SIBs based on the VS2 /MXene electrode present first-class electrochemical performance with the ultrahigh average initial columbic efficiency of 95.08% and excellent sodium-ion storage capacity of 424.6 mAh g-1 even at 10 A g-1 . It also shows an outstanding sodium-ion storage capacity of 514.2 mAh g-1 at 1 A g-1 with a capacity retention of nearly 100% within 500 times high-rate cycling. Such impressive performance demonstrates the successful synthesis strategy and the great potential of interfacial interactions for high-performance energy storage devices.

Controllable ingestion and release of guest components driven by interfacial molecular orientation of host liquid crystal droplets.

Controllable construction and manipulation of artificial multi-compartmental structures are crucial in understanding and imitating smart molecular elements such as biological cells and on-demand delivery systems. Here, we report a liquid crystal droplet (LCD) based three-dimensional system for controllable and reversible ingestion and release of guest aqueous droplets (GADs). Induced by interfacial thermodynamic fluctuation and internal topological defect, microscale LCDs with perpendicular anchoring condition at the interface would spontaneously ingest external components from the surroundings and transform them as radially assembled tiny GADs inside LCDs. Landau-de Gennes free-energy model is applied to describe and explain the assembly dynamics and morphologies of these tiny GADs, which presents a good agreement with experimental observations. Furthermore, the release of these ingested GADs can be actively triggered by changing the anchoring conditions at the interface of LCDs. Since those ingestion and release processes are controllable and happen very gently at room temperature and neutral pH environment without extra energy input, these microscale LCDs are very prospective to provide a unique and viable route for constructing hierarchical 3D structures with tunable components and compartments.

Synthesis of Hierarchical CdS/NiS Photocatalysts Using Ni-MOF-74 as Template for Efficient Ethanol Conversion and Hydrogen Production under Visible Light.

The conversion of ethanol into high-valuable chemicals and H2 by photocatalytic process provides a sustainable approach to produce carbon-chain-prolonged chemicals and hydrogen energy. In this article, Ni-MOF-74 was added to fabricate the hierarchical CdS/NiS-N composites with an elevated specific surface area during the hydrothermal synthesis of CdS microsphere, and the Ni-MOF-74 facilitate the self-assemble growth of CdS and provide a source of Ni for the formation of NiS. The as-prepared photocatalyst was subjected to photocatalytic ethanol conversion, and the hierarchical composite material CdS/NiS-N (100) formed by adding 100 mg of Ni-MOF-74 exhibits the highest photocatalytic activity and stability in an ethanol aqueous solution with a water content of 10 %. Under visible light irradiation, the conversion rate of ethanol reached 15.2 % at the photocatalytic reaction of 5 h. The selectivity of 2,3-butanediol(2,3-BDO) was 25 %, and the selectivity of acetaldehyde(AA) was 63 %. Through various characterizations, it has been proven that a large specific surface area and the coupling interface between CdS and NiS are key factors in improving photocatalytic performance. This work provides an effective strategy for constructing photocatalysts with coupled cocatalysts/semiconductors and large specific surface areas.

Synthesis of Ni Nanosheets by Template-Free Method and Their Application in Conductive and Magnetic Flexible Electrons.

Two-dimensional Ni nanosheets are synthesized by the template-free method using Na3CA as an orientation agent in liquid phase, and then the conductive Ni nanosheet ink is prepared for conductive circuits on flexible electronics. The thickness of the Ni nanosheets is about 800 nm, and the diameter is about 100 µm. Na3CA plays a structural guiding role to form Ni nanocrystals, promoting the self-assembly of Ni nanocrystals into Ni nanosheets effectively. The laminar stackable patterns of the Ni nanosheet circuits increase the contact area of the Ni nanosheets and improve the stability of the conductors under stress. Ni nanosheets can bend with the folding of the structure, while the mutual constraints between their layers promote the circuit to remain stable during the bending state. Therefore, the Ni nanosheet circuits display excellent conductive performance during the tiled and bent stages. In addition, Ni nanosheet/Ag nanowire composites are prepared to enhance conductivity to meet higher demands. Moreover, the experimental results of its application in magnetic guided switch closure circuits show that Ni nanosheet/Ag nanowire composites have the potential to participate in both conductive and magnetic field applications simultaneously.

pH-Sensitive Poly(acrylic acid)-g-poly(L-lysine) Charge-Driven Self-Assembling Hydrogels with 3D-Printability and Self-Healing Properties.

We report the rheological behavior of aqueous solutions of a graft copolymer polyampholyte, constituted of polyacrylic acid (PAA) backbone grafted by Poly(L-lysine) (PAA-b-PLL). The graft copolymer self-assembles in aqueous media, forming a three-dimensional (3D) network through polyelectrolyte complexation of the oppositely charged PAA and PLL segments. Rheological investigations showed that the hydrogel exhibits interesting properties, namely, relatively low critical gel concentration, elastic response with slow dynamics, remarkable extended critical strain to flow, shear responsiveness, injectability, 3D printability and self-healing. Due to the weak nature of the involved polyelectrolyte segments, the hydrogel properties display pH-dependency, and they are affected by the presence of salt. Especially upon varying pH, the PLL secondary structure changes from random coil to α-helix, affecting the crosslinking structural mode and, in turn, the overall network structure as reflected in the rheological properties. Thanks to the biocompatibility of the copolymer constituents and the biodegradability of PLL, the designed gelator seems to exhibit potential for bioapplications.

Synthesis and Biomedical Applications of DNA Hydrogel.

Deoxyribonucleic acid (DNA), as a natural polymer material, carries almost all the genetic information and is recognized as one of the most intelligent natural polymers. In the past 20 years, there have been many exciting advances in the synthesis of hydrogels using DNA as the main backbone or cross-linking agent. Different methods, such as physical entanglement and chemical cross-linking, have been developed to perform the gelation of DNA hydrogels. The good designability, biocompatibility, designable responsiveness, biodegradability and mechanical strength provided by DNA building blocks facilitate the application of DNA hydrogels in cytoscaffolds, drug delivery systems, immunotherapeutic carriers, biosensors and nanozyme-protected scaffolds. This review provides an overview of the main classification and synthesis methods of DNA hydrogels and highlights the application of DNA hydrogel in biomedical fields. It aims to give readers a better understanding of DNA hydrogels and development trends.

Development of Au8 nanocluster-based fluorescent strip immunosensor for sensitive detection of aflatoxin B1.

Gold clusters with intriguing chemical/physical properties have great promise in applications such as sensing and bio-imaging due to their fascinating photoluminescence character. In this study, an immunofluorescence sensor based on levonorgestrel protected atomically precise Au8 nanocluster (Au8NC) for aflatoxin B1 (AFB1) detection was fabricated due to its strong carcinogenic and mutagenic effect on humans. The prepared polymer-Au8NC nanospheres displayed bright luminescence and good stability in aqueous solution. The obtained AFB1 fluorescent strip immunosensor achieved quantitative point-of-care detection of AFB1 in less than 15 min, with high selectivity and detection limits down to 0.27 ng/mL. In addition, the recovery rates of AFB1 from tea soup ranged from 96% to 105% with relative standard deviations less than 10%. This work not only realized high-sensitively fluorescent sensing for AFB1, but also expanded the bio-applications of atomic-precise metal clusters.

ROS-Responsive Prodrug Micelle Co-Delivery System for Synergistic Antiatherosclerotic Therapy.

Tanshinone IIA (TS-IIA) and salvianic acid A (SAA) are the main pharmacological active constituents of Danshen, which exhibit potent effects on atherosclerosis. A combination of TS-IIA and SAA might exert a synergistic antiatherosclerotic effect. However, the opposite solubility profiles of TS-IIA and SAA might lead to difficulty in achieving a synergistic combined effect of the two active components. Therefore, in this work, we fabricated a ROS-responsive prodrug micelle for the codelivery of TS-IIA and SAA (TS-IIA-PM) by self-assembling amphiphilic block copolymer PEG5000-SAA/PLA10000-APBA. The amphiphilic polymer was characterized by 1H NMR, FTIR, and alizarin red S competition tests. The ROS responsiveness of TS-IIA-PM was evidenced by time-course monitoring of particle size and morphology changes and drug release behavior in the presence of 1 mM H2O2. We found TS-IIA-PM was stable according to its critical micelle concentration and the unchanged particle sizes in 10% FBS for 7 days. The results of in vitro and in vivo tests revealed that TS-IIA-PM was safe and biocompatible. Furthermore, it was observed that TS-IIA and prodrug micelle could produce synergistic antiatherosclerotic effect based on the results of the antioxidant study, which was further confirmed by a series of pharmocodynamics studies, such as in vitro DiI-oxLDL uptake study, oil red O staining, cholesterol efflux study, inflammatory cytokine analysis, in vivo CD68 immunostaining, and lipid disposition staining studies. Collectively, TS-IIA-PM holds great potential for the safe and efficient codelivery of TS-IIA and SAA for synergistic antiatherosclerosis.

Built-up sodium alginate/chlorhexidine multilayer coating on dental implants with initiating anti-infection and cyto-compatibility sequentially for soft-tissue sealing.

Soft-tissue sealing at transmucosal sites is very important for preventing the invasion of pathogens and maintaining the long-term stability and function of dental implants. However, the colonization of oral pathogens on the implant surface and surrounding soft tissues can disturb the early establishment of soft-tissue sealing and even induce peri-implant infection. The purpose of this study was to construct two antibacterial coatings with 5 or 10 sodium alginate/chlorhexidine bilayers on titanium surfaces using layer-by-layer self-assembly technology to promote soft-tissue sealing. The corresponding chemical composition, surface topography, wettability and release behaviour were investigated to prove that the resultant coating of sodium alginate and chlorhexidine was coated on the porous titanium surface. In-vitro and in-vivo antibacterial results showed that both prepared coatings inhibited or killed the bacteria on their surfaces and the surrounding areas to prevent plaque biofilm formation, especially the coating with 10 bilayers. Although both coatings inhibited the initial adhesion of fibroblasts, the cytocompatibility gradually improved with coating degradation. More importantly, both coatings achieved cell adhesion and proliferation in an in-vitro bacterial environment and effectively alleviated bacteria-induced subcutaneous inflammation in-vivo. Therefore, this study demonstrated that the multilayered coating could prevent implant-related infections in the initial stage of implant surgery and then improve soft-tissue integration with implant devices.