Dimensional Accuracy of Two-Step Impressions Relined with Extra-Light Addition Silicone Material.

Objectives: Some small defects may remain in the impression after making a two-step putty-light body impression. The aim of this study was to evaluate and compare the dimensional accuracy of 2-step and relined 2-step (3-step) putty-light body impressions. Materials and Methods: In this in vitro study, 30 impressions were made with putty, light body, and extra-light body addition silicone materials using the 2-step and 3-step impression techniques (N=15). An epoxy resin master model was made duplicating a maxillary typodont with left first premolar and first molar teeth prepared with a shoulder finish line and truncated pyramidal-shaped indices in the mid-palate and third molar sites. In addition to creating a reference digital model by scanning the master model, 30 master casts were scanned to produce digital models. The anteroposterior (AP) and cross-sectional (CS) dimensional accuracy of the models were compared with the master model using linear measurements. Moreover, tooth size measurements were made and compared using the root mean square (RMS). Two-sample t-test was applied to analyze the data (α=0.05). Results: The mean AP and RMS differences between the two study groups were not significant (P>0.05). However, the CS difference between the two groups was significant (P<0.001), and the 3-step impression technique showed smaller discrepancies in comparison to the master model. Conclusion: There was no significant difference in accuracy of the two techniques for single-unit and multiple-unit preparations. The 3-step impression technique had a higher CS dimensional accuracy.

Silicones for Maxillofacial Prostheses and Their Modifications in Service.

The biomedical applications of silicones are countless due to their outstanding properties. In dentistry, silicone for maxillofacial and plastic surgery has become indispensable, from both physiological and aesthetic points of view. In this mini-review, silicone materials for dentistry and facial prostheses are discussed, focusing on their properties and alterations when exposed for long periods to different environments. A significant number of studies reported in the literature have been conducted in vitro, mimicking some of the main degradative factors which have been identified as triggers for discoloration and deterioration of the mechanical properties. Among these, in artificial aging and accelerated natural aging studies, UV radiation is considered the most important. Other weathering factors, biological contamination, and disinfection agents may have dramatic effects as well. Several general properties of silicones are described at the beginning, with a focus on biocompatibility, cross-linking mechanisms, and applications in dentistry and maxillofacial prosthetics. We discuss the ongoing cross-linking and/or possible exudation after manufacturing, which also affects the stability of the prosthesis over time, and possibly the patient. Next, the main environmental factors that affect the prostheses in service are presented, including the role of cigarettes smoke, which has been discussed very little so far. A few aspects, such as biofilm formation, its negative effects, and proposed solutions to overcome this phenomenon regarding silicones, are also described. We conclude by proposing a set of topics for future research and development based on the gaps that have been identified in the literature. Although silicones are probably irreplaceable in maxillofacial prosthetics, improvements in terms of base materials, additives, surface treatments, and maintenance are possible and necessary for long-lasting and safer prostheses.

Undifferentiated Pleomorphic Sarcoma Mimicking Breast Implant-Associated Anaplastic Large Cell Lymphoma.

Breast implant augmentation is a low-risk procedure with few life-threatening complications, most commonly rupture or leakage and contraction of the capsule. Breast implant-associated (BIA) malignancies are rare. Anaplastic large cell lymphoma (ALCL) is the most well-known neoplastic condition associated with breast augmentation. Carcinomas arising in association with implants have been reported but are rarer than ALCL. BIA-mesenchymal tumors are extremely rare and most are locally aggressive fibromatosis. To date, only eight cases of BIA sarcomas have been reported. Herein, we describe a case of silicone BIA-undifferentiated pleomorphic sarcoma (UPS) that was initially mistaken for ALCL because of a significant clinical and radiological overlap in presentation and imaging. Here, we present the morphological and molecular features of this rare neoplasm. We reviewed the existing literature related to BIA sarcomas to highlight the importance of considering this diagnosis in cases of recurrent ALCL-negative BIA effusions.

In situ study of the effect of endogenous and exogenous agents on color stability, hardness, and surface roughness of an elastomer for facial prostheses.

PURPOSE: To evaluate in situ the influence of sweat, oil, sunscreen, and disinfectant solution on the color stability, hardness, and roughness of elastomer for facial prostheses. MATERIALS AND METHODS: Standardized and intrinsically pigmented specimens remained in contact with human skin from the same person for 30 days, considering exposures (n = 36 per group), absent of exposition (Control, C); sweat and oiliness contact (SO); sweat and oiliness associated with sunscreen (SOS); 0.12% chlorhexidine digluconate immersion (CD0.12%); and all agents exposed (SOSCD). The main variables were color change (CIELab and National Standard Bureau system, NBS), Shore A hardness, and surface roughness, measured at baseline and 30 days. Qualitative analyses were performed by atomic force microscopy (AFM) and scanning electron microscopy (SEM). The data were analyzed by Kruskal-Wallis tests (color) and two-way ANOVA (hardness and roughness) with Sidak post-test (α = 0.05). RESULTS: CD0.12% (1.54 ± 0.49) and SOSCD (2.10 ± 1.03) had similar effects and caused the smallest color changes, considered mild and noticeable (NBS), respectively. SOS promoted the greatest color change (6.99 ± 1.43, NBS: large) and hardness (17.97 ± 0.56); SOS promoted intermediate roughness (3.48 ± 1.05) between SOSCD (2.25 ± 0.53), and two similar groups: C (4.46 ± 0.95), and CD0.12% (4.39 ± 1.26). The qualitative analysis showed an irregular, dense, dry, and whitish layer on the surface of the specimens exposed to sunscreen, which was reduced when in contact with 0.12% chlorhexidine digluconate. CONCLUSIONS: Endogenous and exogenous factors are capable of altering elastomer properties. The 0.12% chlorhexidine digluconate minimized the changes caused by sweat, oil, and sunscreen.

Frequently used extraoral maxillofacial prosthetic materials and their longevity - A comprehensive review.

The longevity of an extraoral prosthesis depends on its physical and mechanical properties and user maintenance. Faced with multiple outcome measures, researchers find it difficult to determine the most appropriate extraoral prosthetic material. This comprehensive review evaluates the most used extraoral prosthesis materials and qualitatively assesses their longevity and function. The study aims to identify and interpret the results of current updates on the factors that affect longevity and functionality. This comprehensive review summarizes and evaluates differences in the properties of commonly used extraoral maxillofacial prosthetic materials. The review was planned to focus on all factors related to the longevity and function of the extraoral maxillofacial prosthetics. An electronic search covered English articles in PubMed, Scopus, Google Scholar, Web of Science, and grey literature. Manual searching was also performed. Six authors participated in the screening. Search engines extracted 1107 records, and 88 studies were included for qualitative and bias assessments. Silicones are the most frequently used extraoral maxillofacial prosthetic materials. Heat-cured silicones are more color-stable than those cured at room temperature. Additional ingredients and processing techniques affect prosthesis longevity.

Why Is the Baker Classification Inadequate for Classifying Silicone Implant Fibrous Capsules?

Baker's clinical classification is adopted as the gold standard for grading complications related to silicone implants. Despite being widely used for this purpose, the classification has several limitations, highlighting subjectivity, reproducibility, and interobserver agreement. In this technical report, we aim to present the reasons for the inadequacy of the Baker classification for breast implants and the main factors contributing to false-negative results using recent theories of surface tension of fluids and gel bleeding. We also present an alternative classification proposal using magnetic resonance imaging of the breasts.

Construct validation of a novel synthetic tendon model used for assessing surgeon performance in a simulated core suture tendon repair technique.

BACKGROUND: The strength of tendon repair is dependent on the quality of the core suture. Organic and synthetic materials have been used to simulate tendon repair for training; however, no model has undergone construct validation. OBJECTIVES: To determine the construct validity of a novel synthetic tendon repair model. METHODS: Synthetic silicone tendon models were used to simulate adult Achilles tendon (AT) and digital flexor tendon (FT). Participants were categorised into novice, intermediate, and advanced groups based on prior surgical experience. Participants repaired tendons using the modified Kessler technique. A validated motion analysis system was used to measure the duration, path length, and movement count during the simulated task. A global rating score was also used to assess the performance. RESULTS: All participants in the novice (n = 12), intermediate (n = 8) and advanced (n = 11) groups completed the tasks. The results (mean±standard deviation) were duration (872 ± 335, 492 ± 257 and 357 ± 40 s), path length (9493 ± 3173, 6668 ± 1740 and 4672 ± 1228 cm), movement count (4974 ± 673, 4228 ± 259 and 3962 ± 69) and global rating (39 ± 13, 61 ± 14, 81 ± 5), respectively. The Kruskal-Wallis test was significant for all outcome measures (p < 0.01). Significant differences in duration and movement count were identified post-hoc in the AT model for each experience group (p < 0.05), and between novice and intermediate participants for FT repair (p < 0.04). Global rating was significantly different between all groups and was highly correlated with motion metrics (p < 0.01). CONCLUSION: The results support construct validity of this novel simulated tendon repair model. The global rating scores may allow wide utility of this simulation. This model provides a valid and safe environment for surgical trainees to practice tendon repair with several cost, ethical and logistical benefits over animal tendon use. 248/250.

Preload and Removal Torque of Two Different Prosthetic Screw Coatings-A Laboratory Study.

This study aimed to evaluate the effect of two coating materials, a silicone sealing gel and a polytetrafluoroethylene (PTFE) tape, on the screw preload and removal torque value (RTV) to develop strategies to prevent prosthetic screw loosening. We examined 45 complexes comprising an implant, abutment, and prosthetic screw, of which 15 samples were uncoated, 15 were coated with GapSeal® (Hager & Werken GmbH & Co., Duisburg, Germany), and 15 were coated with PTFE tape (MIARCO®, Valencia, Spain). The screws were tightened to register the preload and then untightened to register the RTV. The preload values showed a statistically significant difference only in the PTFE group, suggesting that this lubricant negatively affects the preload. The RTVs showed statistically significant differences among all groups, with the GapSeal® group and PTFE group showing the highest and lowest values, respectively. It can be concluded that the application of the PTFE tape on the screw significantly reduced the preload and RTV. The silicone sealing gel did not affect the preload but increased the RTV. Therefore, the use of GapSeal® should be considered to prevent prosthetic screw loosening, while the use of PTFE tape should be avoided.

Maxillofacial prosthetics and digital technologies: Cross-sectional study of healthcare service provision, patient attitudes, and opinions.

PURPOSE: Digital technologies are continuously improving the accuracy and quality of maxillofacial prosthetics, but their impact on patients remains unclear. This cross-sectional study aimed to analyze the impact of facial prosthetics service provision, patients' perception, and digital technology on prostheses construction. MATERIALS AND METHODS: All patients who presented for evaluation and management of facial defects between January 2021 and December 2021 at the ENT clinic were eligible for study enrollment. Patients requiring prosthetic reconstruction of their missing facial parts were included in the study. Forty-five questionnaires were delivered, inquiring about the patients' prosthetic demographics, prosthesis manufacture using 3D technologies, and their perceptions and attitudes. RESULTS: A total of 37 patients responded (29 males, eight females; mean age 20.50 years). The congenital cause was the highest among other causes (p = 0.001) with auricular defects being the highest (p = 0.001). A total of 38 prostheses were constructed and 17 prostheses were retained by 36 craniofacial implants (p = 0.014). The auricular and orbital implants success rates were 97% and 25%, respectively. The implant locations were digitally planned pre-operatively. Digital 3D technologies of defect capture, data designing, and 3D modeling were used and perceived as helpful and comfortable (p = 0.001). Patients perceived their prosthesis as easy to handle, suited them, and they felt confident with it (p = 0.001). They wore it for more than 12 h daily (p = 0.001). They were not worried that it would be noticed, and found it comfortable and stable during various activities (p = 0.001). Implant-retained prosthesis patients were more satisfied with it, and found it easy to handle and stable (p = 0.001). CONCLUSIONS: Congenital defects are the main cause of facial defects in the study country. The overall acceptance of maxillofacial prostheses was good, showing high patient perception and satisfaction. Ocular and implant-retained silicone prostheses are better handled, more stable, and the latter is more satisfying than traditional adhesive prostheses. Digital technologies save time and effort invested in manufacturing facial prostheses.

Fatores de risco consequentes a complicações no pósoperatório da mastoplastia de aumento primária com implantes de silicone: Estudo retrospectivo / Risk factors resulting from complications in the postoperative period of primary breast augmentation with silicone implants: Retrospective study

Introdução: A mamoplastia de aumento é uma das cirurgias plásticas mais realizadas no mundo. Tendo em vista sua alta aplicabilidade, é fundamental conhecer os fatores de risco relacionados à incidência de complicações pós-operatórias a fim de reduzilas nesse tipo de procedimento. Método: Este estudo é retrospectivo feito por meio da análise dos prontuários de 76 pacientes que realizaram mamoplastia de aumento primária com implantes de silicone durante os meses de janeiro de 2018 a dezembro de 2020. Resultados: Observou-se que a presença de comorbidades aumentou a incidência de complicações pós-operatórias precoces (p<0,001), mas não de complicações pósoperatórias tardias (p=0,8). O maior tempo cirúrgico também aumentou a incidência de complicações pós-operatórias (p=0,005). Conclusão: A presença de comorbidades influencia diretamente na incidência de complicações pós-operatórias da mastoplastia de aumento e por esta razão deve-se realizar uma adequada compensação pré-operatória antes de submeter as pacientes a este procedimento cirúrgico.

Introduction: Breast augmentation is one of the most performed plastic surgeries in the world. Given its high applicability, it is essential to know the risk factors related to the incidence of postoperative complications to reduce them in this type of procedure. Method: This retrospective study analyzed the medical records of 76 patients who underwent primary breast augmentation with silicone implants from January 2018 to December 2020. Results: It was observed that the presence of comorbidities increased the incidence of early postoperative complications (p<0.001) but not of late postoperative complications (p=0.8). Longer surgical time also increased the incidence of postoperative complications (p=0.005). Conclusion: The presence of comorbidities directly influences the incidence of postoperative complications after breast augmentation, and for this reason, adequate preoperative compensation must be carried out before submitting patients to this surgical procedure.

Finger prosthesis: A novel way to restore the form, function, and esthetics.

Key Clinical Message: A well-customized prosthesis with a life-like esthetic and function are the primary determining factors for its acceptance and success. RTV silicones can prove to be very effective and useful in fabricating such prosthesis. Abstract: Complete or partial finger amputations impact an individual's psychological and physical well-being and are considered the most frequently observed pattern of hand loss. A customized prosthesis offers the patient rehabilitative, functional, and psychological advantages. Retention is the key to the success of such prosthetic restoration. The present case report describes a novel technique that utilizes passive vacuum fit and mechanical retention to restore controlled function movements as a metal wire framework. The procedure was economical, most importantly, produced life-like anatomy of the missing digit and restored the function to some extent.

The Impact of Liquid Components on Alteration of the Adhesion of Polyacrylate and Silicone Patches.

Polyacrylates and polysiloxanes are polymers used in pressure-sensitive adhesive (PSA) patches. Liquid additives are co-solvents of the active substances or permeation enhancers, and their compatibility with the polymeric matrix and the effect on adhesive properties should be considered. The patches were prepared from commercial polyacrylates (three types of Duro-Tak®) and siloxanes (Bio-PSA® and Soft Skin Adhesive®). Propylene glycol, polyoxyethylene glycol, isopropyl myristate, triacetin, triethyl citrate and silicone oil were added (10% w/w). Formulations were evaluated microscopically and with a texture analyzer in terms of in vitro adhesiveness and hardness. Only silicone oil was compatible with the silicone matrices. The best compatibility of acrylic PSA was observed with triethyl citrate; one out of three Duro-Tak matrices was incompatible with every additive. In all compositions, the adhesiveness was impaired by the liquid additives. A significant drop in adhesiveness was noted after immersion of the patches in buffer and drying. The probe tack test was considered as the most useful for evaluation of the effect of the liquid additive on adhesiveness, but the results obtained with a spherical and cylindrical probe were contradictory. The structural changes caused by the additives were also demonstrated by a 90° peel test, considered as complementary to the tack test.

Self-Healing Antimicrobial Silicones-Mechanisms and Applications.

Organosilicon polymers (silicones) are an important part of material chemistry and a well-established commercial product segment with a wide range of applications. Silicones are of enduring interest due to their unique properties and utility. Recently, new application areas for silicone-based materials have emerged, such as stretchable electronics, wearable stress sensors, smart coatings, and soft robotics. For this reason, research interest over the past decade has been directed towards new methods of crosslinking and increasing the mechanical strength of polyorganosiloxanes. The introduction of self-healing mechanisms may be a promising alternative for such high-value materials. This approach has gained both growing research interest and a rapidly expanding range of applications. Inherent extrinsic and intrinsic self-healing methods have been used in the self-healing of silicones and have resulted in significant advances in polymer composites and coatings, including multicomponent systems. In this review, we present a summary of research work dedicated to the synthesis and applications of self-healing hybrid materials containing polysiloxane segments, with a focus on antimicrobial and antifouling coatings.

Effect of Thixotropic Agent on the Color Stability of Platinum-Based Silicone Maxillofacial Elastomers after Artificial Aging.

Maxillofacial prostheses are essential for restoring natural appearance and function in individuals with defects in the head and neck regions. Thixotropic agents, as liquid additives, are known to increase the viscosity of silicone elastomers. However, color deterioration remains a challenge in facial prostheses, leading to the need for refabrication. Despite this, there is limited research on the effect of thixotropic agents on the color stability of silicone maxillofacial elastomers. This study aims to investigate the impact of different thixotropic agent amounts on the color degradation of various maxillofacial silicone elastomers. Three elastomers (A-2000, A-2006, and A-2186) were combined with five pigments (no pigment as control, red, yellow, blue, and a mixture of red, yellow, and blue), and mixed with six thixotropic agent quantities (0, 1, 2, 3, 4, and 5 drops). A total of 450 specimens were fabricated (n = 5) and aged in an artificial aging chamber. L*, a*, b* readings were obtained before and after aging using a digital spectrophotometer. Color difference (ΔE*) means and standard deviations for 150 kj/m2, 300 kj/m2, and 450 kj/m2 were calculated. Statistical analyses, including four-way ANOVA and Fisher's PLSD test, were conducted to determine any significant differences (p < 0.05) among the groups. A comprehensive analysis revealed significant four-way interactions among the groups. In the mixed-pigmentation group, adding 4 drops of thixotropic agent resulted in ΔE* above 3 only in A-2186 silicone at 300 and 450 kj/m2 energy levels. However, the color stability of mixed-pigmented A-2000 and A-2006 remained within the acceptable thresholds of 3 ΔE* at all irradiance levels in this study. At each energy level, A-2006 exhibited the highest color stability with an increasing thixotropic agent quantity among all the silicones. Conversely, A-2186 was more affected by the increased number of thixotropic agent drops in each pigmentation group, including the control group at 450 kj/m2. The quantity of thixotropic agent plays a crucial role in determining the color stability of different silicone elastomers pigmented with various intrinsic pigments. The thixotropic agent amount has a more significant impact on color stability than the type of pigment used in the silicone elastomers. A key overarching insight from this investigation is the identification of a safety threshold for the thixotropic agent quantity of 3 drops for each silicone type, pigmentation, and energy level. These findings highlight the importance of considering the proper combination of thixotropic agents, pigments, and silicone materials to achieve optimal color stability in maxillofacial prosthetic applications.

Effects of Processing-Induced Contamination on Organic Electronic Devices.

Organic semiconductors are a family of pi-conjugated compounds used in many applications, such as displays, bioelectronics, and thermoelectrics. However, their susceptibility to processing-induced contamination is not well understood. Here, it is shown that many organic electronic devices reported so far may have been unintentionally contaminated, thus affecting their performance, water uptake, and thin film properties. Nuclear magnetic resonance spectroscopy is used to detect and quantify contaminants originating from the glovebox atmosphere and common laboratory consumables used during device fabrication. Importantly, this in-depth understanding of the sources of contamination allows the establishment of clean fabrication protocols, and the fabrication of organic field effect transistors (OFETs) with improved performance and stability. This study highlights the role of unintentional contaminants in organic electronic devices, and demonstrates that certain stringent processing conditions need to be met to avoid scientific misinterpretation, ensure device reproducibility, and facilitate performance stability. The experimental procedures and conditions used herein are typical of those used by many groups in the field of solution-processed organic semiconductors. Therefore, the insights gained into the effects of contamination are likely to be broadly applicable to studies, not just of OFETs, but also of other devices based on these materials.

Towards Less Plastic in Food Contact Materials: An In-Depth Overview of the Belgian Market.

The food contact materials (FCMs) industry is forced to develop substitute materials due to constant pressure from consumers and authorities to reduce fossil-based plastic. Several alternatives are available on the market. However, market share, trends, and consumer preferences are still unclear. Therefore, this study aims to provide an overview of the Belgian FCMs market, the available substitute materials, and their uses. The market analysis was performed with an integrated web-based approach. Fifty-two sources were investigated, covering e-shops selling materials intended to replace disposable plastic materials or being advertised as environmentally friendly and websites describing homemade FCMs. The first screening identified 10,523 articles. The following data cleaning process resulted in a homogeneous dataset containing 2688 unique entries, systematically categorised into fifteen material categories and seven utilisation classes. Paper and board was the most popular material category (i.e., 37% of the entries), followed by bagasse, accounting for 9% of the entries. Takeaway and food serving (44.4% and 22.8% of the entries) were the most common usage categories. The study pursued to provide insights into current trends and consumer preferences, highlighting priorities for safety assessment and future policy making.

Efficacy of fitting HydroCone (Toris K) contact lenses for the visual rehabilitation of patients with posterior microphthalmos / Eficácia da adaptação de lentes de contato HydroCone (Toris K) para reabilitação visual de pacientes com microftalmia posterior

ABSTRACT Purpose: To evaluate the efficacy of soft HydroCone silicone hydrogel contact lenses in patients with posterior microphthalmos. Methods: The charts of 13 patients with posterior microphthalmos (26 eyes) who were fitted with soft HydroCone silicone hydrogel contact lenses were reviewed retrospectively. All the patients underwent assessments of uncorrected and best spectacle-corrected visual acuity and cycloplegic refraction. They were fitted with contact lenses according to the parameter values obtained from the topographical analysis and best contact lens-corrected visual acuity measurement. Results: The spherical equivalents of the right and left eyes ranged from 10.00 to 19.25 diopters and from 11.00 to 21.5 diopters, respectively. The mean axial and posterior chamber lengths were shorter than those of the age-matched population. However, the mean values of the anterior segment parameters such as horizontal visible iris diameter, central anterior chamber depth, lens thickness, and central corneal thickness were in the normal range. The mean keratometric measurements revealed increased corneal curvature compared with that in the normal population. The mean best contact lens-corrected visual acuity was significantly higher than the mean best spectacle-corrected visual acuity for both eyes (p=0.045). Conclusion: HydroCone silicon soft contact lenses provided better visual acuity than spectacles in the patients with posterior microphthalmos in this study.

RESUMO Objetivo: Avaliar a eficácia das lentes de contato gelatinosas HydroCone, de hidrogel com silicone, em pacientes com microftalmia posterior. Métodos: Foram revisados retrospectivamente 26 olhos com microftalmia posterior, a partir dos prontuários de 13 pacientes que receberam lentes de contato gelatinosas HydroCone, de hidrogel com silicone. Todos os pacientes foram submetidos ao exame de acuidade visual não corrigida e com melhor correção por óculos e com refração cicloplégica. Todos os pacientes receberam lentes de contato de acordo com os parâmetros obtidos na análise topográfica e foi obtida a melhor acuidade visual corrigida com lentes de contato. Resultados: O equivalente esférico do olho direito variou de 10,00 a 19,25 dioptrias, e o do olho esquerdo de 11,00 a 21,5 dioptrias. Os comprimentos médios axiais e das câmaras posteriores foram menores do que para a população de mesma idade. No entanto, os valores médios dos parâmetros do segmento anterior, como o diâmetro horizontal visível da íris, a profundidade da câmara anterior central, a espessura da lente e a espessura central da córnea estavam dentro da faixa normal. Os valores médios da ceratometria revelaram curvatura corneana aumentada em relação à população normal. A média da melhor acuidade visual corrigida com lentes de contato foi significativamente maior que a média da melhor acuidade visual corrigida com óculos em ambos os olhos (p=0,045). Conclusão: As lentes de contato gelatinosas de silicone HydroCone proporcionam melhor acuidade visual que óculos em pacientes com microftalmia posterior.

Ceramic versus Composite Resin Polishing Systems on the Surface Roughness of Milled Leucite-Reinforced Ceramics.

Background and Objective: This study aimed to compare the surface finish of milled leucite-reinforced ceramics polished with ceramic and composite polishing systems based on the manufacturers' recommendations. Materials and Methods: Sixty subtractive computer-aided manufactured (s-CAM) leucite-reinforced glass-ceramic specimens (IPS-Empress-CAD) were assigned into six groups: no polishing, a ceramic polishing kit, and four composite kit groups. The roughness average (Ra) was evaluated in microns using a profilometer, and scanning electron micrographs were obtained for qualitative analysis. A Tukey HSD posthoc test (α = 0.05) was used to determine significant intergroup differences. Results: After surface evaluation of the ceramics, the Ra values of the polishing systems ranked OptraFine (0.41 ± 0.26) < Enhance (1.60 ± 0.54) < Shofu (2.14 ± 0.44) < Astropol (4.05 ± 0.72) < DiaComp (5.66 ± 0.62) < No Polishing (5.66 ± 0.74). Discussion: Composite polishing systems did not provide as smooth surfaces as the ceramic polishing kit for CAD-CAM leucite-reinforced ceramics. Thus, using ceramic polishing systems, polishing leucite ceramics is recommended, whereas composite polishing systems should not be considered as an alternative for use in minimally invasive dentistry.

Silicone-Induced Granulomas of Breast Implant Capsule (SIGBIC).

Teaching point: A hypoechogenic mass within the fibrous capsule of a breast implant could correspond with a silicone-induced granuloma.

ASIA and BIA-ALCL as adverse reactions to silicone breast implants / ASIA e BIA-ALCL como reações adversas aos implantes mamários de silicone

Adjuvant-induced autoimmune/inflammatory syndrome leads to capsular contracture and fibrosis from the oxidation that takes place in silicone. Anaplastic large cell lymphoma occurs through the development of a seroma, with the formation of a periprosthetic effusion, or through the infiltration of the condition itself. To analyze these conditions, a review of the literature was carried out on the symptoms and pathophysiology of the autoimmune/inflammatory syndrome induced by adjuvants and anaplastic large cell lymphoma, searched using the terms "ASIA breast silicone," "Lymphoma," "Adjuvants" "Immunologic" " Breast Implants" on the PubMed platform. Analyzing the data obtained, it was noted that the symptoms of the autoimmune/inflammatory syndrome induced by adjuvants are nonspecific, such as fatigue, myalgia, arthralgia, morning stiffness, and night sweats, and therefore need attention. Anaplastic large cell lymphoma presents with breast pain, periprosthetic effusion, and palpable mass, among other characteristics. Because of these aspects, it is concluded that a good investigation should be carried out when nonspecific symptoms appear, regardless of the time the surgery was performed since these complications can occur years later.

A síndrome autoimune/inflamatória induzida por adjuvantes leva à contratura capsular e fibrose pela oxidação que acontece no silicone. O linfoma anaplásico de grandes células ocorre através do desenvolvimento de um seroma, com a formação de derrame periprotético ou por uma infiltração da própria afecção. Para análise destes acometimentos, foi realizada uma revisão da literatura acerca da sintomatologia e fisiopatologia da síndrome autoimune/inflamatória induzida por adjuvantes e linfoma anaplásico de grandes células, pesquisada através dos termos "ASIA breast silicone" "Lymphoma" "Adjuvants" "Immunologic" "Breast Implants" na plataforma PubMed. Analisando os dados obtidos, notou-se que os sintomas da síndrome autoimune/inflamatória induzida por adjuvantes são inespecíficos, como fadiga, mialgia, artralgia, rigidez matinal e suores noturnos, e, portanto, necessitam de atenção. Já o linfoma anaplásico de grandes células se apresenta com dor mamária, derrame periprotético, massa palpável, dentre outras características. Em vista destes aspectos, conclui-se que uma boa investigação deve ser realizada ao surgirem sintomas inespecíficos, independentemente do tempo que a cirurgia foi realizada, uma vez que estas complicações podem ocorrer anos após a cirurgia.