The effectiveness of bone anchored maxillary protraction (BAMP) in the management of class III skeletal malocclusion in children aged 11-14 years compared with an untreated control group: A multicentre two-arm parallel randomised controlled trial.

OBJECTIVE: To evaluate the effectiveness of bone anchored maxillary protraction (BAMP) in the management of class III skeletal malocclusion in children aged 11-14 years compared with an untreated control group in terms of perceived need for orthognathic surgery, skeletal and dental change, and psychological impact. DESIGN: A multicentre two-armed parallel randomised controlled trial. SETTING: Six UK hospital orthodontic units. METHODS: A total of 57 patients were randomly allocated into either the BAMP group (BAMPG) (n = 28) or a no treatment control group (CG) (n = 29). OUTCOMES: Data collection occurred at registration (DC1),18 months (DC2) and 3 years (DC3), where skeletal and dental changes were measured from lateral cephalograms and study models. Oral Aesthetic Subjective Impact Score (OASIS) and Oral Quality of Life (OHQOL) questionnaires were used to assess the psychological impact of treatment. RESULTS: The mean age was 12.9 ± 0.7 years and 12.6 ± 0.9 years in the BAMPG and CG, respectively. At DC2, the BAMPG achieved a class III ANB improvement of +0.6° compared with -0.7° in the CG (P = 0.004). The overjet improvement was +1.4 mm for the BAMPG and -0.2 mm for the CG (P = 0.002). There was no evidence of any other group differences for the other skeletal or dental cephalometric outcomes (P > 0.05) or the questionnaire data (OASIS P = 0.10, OHQOL P = 0.75). At DC2, the 18-month follow-up, 22% of the BAMPG achieved a positive overjet. At the 3-year follow-up (DC3), fewer patients in the BAMPG were perceived to need orthognathic surgery (48%) compared with 75% of patients in the CG (P = 0.04), with an odds ratio of 0.31 (95% confidence interval = 0.10-0.95). CONCLUSION: The BAMP technique did not show any social or psychological benefits; however, the skeletal class III improvement in ANB and the overjet change were sufficient to reduce the perceived need for orthognathic surgery by 27% compared with the CG.

Comparison of temporomandibular joints in relation to ages and vertical facial types in skeletal class II female patients: a multiple-cross-sectional study.

BACKGROUND: The temporomandibular joint (TMJ) is closely related to the dynamic balance and stability of mandibular function and orthodontic treatment. Skeletal class II female patients are thought to be at high risk for TMJ disease. The relationship between the TMJ and craniofacial structures is still controversial. This study compared the morphology and position of the TMJ in skeletal class II adolescents and adults with various vertical facial types using cone-beam computed tomography (CBCT). MATERIALS AND METHODS: A total of 117 skeletal class II patients were divided into three groups according to the FH-GoGn angle (hypodivergent, normodivergent and hyperdivergent), with 40 class I normodivergent patients serving as controls. Each group contained two age subgroups (adolescents: 11-14 years old, adults: 18-35 years old). The size (condylar length, height, long and short axis diameter, glenoid fossa width and depth) and shape (condylar neck inclination, condylar head angle and long axis angle, articular eminence inclination) of the condyle and fossa, joint space (anterior, superior, posterior, mesial and lateral), and position of the fossa (vertical, transverse, and anteroposterior distance) and condyle were measured and compared using CBCT. RESULTS: Class II hypodivergent patients exhibited the greatest condylar length, height, and long- and short-axis diameter; steepest articular eminence; deepest fossa depth; largest superior, mesial and lateral joint spaces; and highest fossa position in both age groups. The manifestations of class II hyperdivergent patients were mostly the opposite. In adults, except for the condylar long axis angle, the measurements of the condyle increased differently among skeletal patterns, while the measurements of the fossa decreased, as the joint spaces and fossa position remained approximately stable compared with those in adolescents. CONCLUSION: The vertical skeletal pattern, rather than the class II sagittal skeletal pattern, may be the main factor affecting the morphology and position of the TMJ. Attention should be given to the TMJ area in hyperdivergent patients with a relatively poor-fit condyle-fossa relationship. The changes in the TMJ with age were mainly morphological rather than positional and varied with skeletal pattern.

Integrated Care Strategies for Unilateral Cleft Lip and Palate: A Multidisciplinary Treatment Approach for Profile Correction.

Cleft lip and palate (CLP) is a prevalent congenital craniofacial deformity that can be unilateral or bilateral. This case report highlights the interdisciplinary approach to managing a 24-year-old male with unilateral CLP (UCLP), emphasizing the complexity of associated dental and skeletal challenges. The patient had undergone multiple surgeries, including lip closure at three months, palate repair at seven years, and alveolar bone grafting at 12 years. Clinical assessments revealed a retruded maxilla, an absence of lateral incisors, and scars from previous surgeries. Radiographic evaluations indicated a Class III skeletal pattern and confirmed the presence of a cleft on the left side. Orthodontic treatment commenced with maxillary arch alignment, followed by Le Fort I surgery to address maxillary retrusion, correct skeletal malocclusion, and close the alveolar cleft space. The post-surgical phase involved orthodontic adjustments, crossbite correction, and alignment of the mandibular arch. Despite the discontinuation of treatment due to the patient's relocation, the interdisciplinary collaboration achieved significant improvements, including a corrected facial profile, maxillary advancement, closure of the cleft space, and enhanced dental alignment. The patient's confidence and functionality were positively impacted. This case underscores the importance of a coordinated interdisciplinary approach to addressing the multifaceted challenges associated with UCLP, aiming to optimize both aesthetic and functional outcomes for improved patient well-being.

Comparison of the transverse cranial base dimension in different craniofacial skeletal relationships: A cone-beam computed tomography study.

Background/purpose: In comparing the cranial base's size, most cephalometric studies focused on the length and angle in the anteroposterior direction. However, investigating the anterior, middle, and posterior cranial base's transverse dimensions is challenging. This study aimed to investigate the transverse dimensions of the cranial base in different craniofacial skeletal patterns and sexes using cone-beam computed tomography (CBCT). Materials and methods: A total of 210 adults (105 males and 105 females), including three different skeletal relationships, were included in the study. The cranial base dimensions were measured on a three-dimensional image structure rendered by CBCT. Statistical methods included the Kappa statistic for analysis of consistency and reproducibility and the independent t-test for differences in cranial base dimensions between sexes. A general linear model (GLM) was used to compare the transverse size of the cranial base among skeletal Class I, II, and III groups. The Pearson correlation coefficient explored the correlation among the cranial base dimensions. Results: The cranial base dimensions did not differ significantly between skeletal Class I, II, and III. The more prominent cranial base size was found in males than females, except for the crista galli length (CGL) and cribriform ethmoid plate width (CEPW). The cranial base dimensions did not differ significantly between different skeletal relationships. Most dimensions have significant correlations in the middle and the posterior cranial base. Conclusion: The cranial base's transverse dimensions in Taiwanese adults show no significant differences between craniofacial skeletal relationships. In the middle and posterior cranial base, transverse measurements reveal significant sexual dimorphism.

Pharyngeal airway dimensions in Iranian female young adults with different skeletal patterns using cone-beam computed tomography.

OBJECTIVES: To assess the oropharyngeal airway in Iranian female young adults with different skeletal patterns using cone-beam computed tomography (CBCT). MATERIALS AND METHODS: This descriptive, cross-sectional study evaluated 105 CBCT scans of female patients between 18 and 35 years retrieved from the archives of a radiology clinic. The images were evaluated in axial, sagittal, and frontal sections. In the axial plane, the maximum and minimum cross-sectional area (CSA) of the airways at the oropharynx, minimum width (anteroposteriorly), and minimum depth (laterally) were measured using Mimics Medical software. The oropharyngeal volume was measured by NemoFAB software. The values were compared among the groups with different sagittal, vertical, and transverse patterns. The correlation of indices with airway measurements was analyzed using Monte Carlo Chi-square and Pearson's correlation coefficient. RESULTS: No significant difference was noted in oropharyngeal airway dimensions and volume among cases with different skeletal sagittal, vertical, and transverse patterns (P > 0.05) except for class III patients with normal transverse pattern in whom maximum CSA in low-angle group was larger than that in normal-angle group (P < 0.05) and class I normal-angle patients in whom maximum CSA in transverse normal group was smaller than that in constriction group (P < 0.05). CONCLUSIONS: Oropharyngeal dimensions were not significantly different in Iranian female young adults with different skeletal patterns.

Effect of craniofacial morphology on gingival parameters of mandibular incisors.

OBJECTIVES: To investigate the association between the width of keratinized gingiva (WKG), gingival phenotype (GP), and gingival thickness (GT) with craniofacial morphology in sagittal and vertical dimensions. MATERIALS AND METHODS: WKG, GP, and GT of mandibular anterior teeth in 177 preorthodontic patients (mean age 18.38 ± 5.16 years) were assessed clinically using a periodontal probe, a Colorvue Biotype Probe, and ultrasound by a single examiner. Patients were grouped into skeletal Class I, II, and III and hyperdivergent, normodivergent, and hypodivergent based on ANB and SN-MP angles. Mandibular incisor inclination (L1-NB) was also measured. Clinical and cephalometric measurements were repeated to assess inter- and intraexaminer reproducibility. RESULTS: A significant association was found between thin GP and skeletal Classes I and III for the left mandibular central incisor (MCI; P = .0183). In skeletal Class III patients, L1-NB angle demonstrated a decreasing trend as phenotype thickness decreased. A significant association was found between thin phenotype and normodivergent and hypodivergent groups for MCIs (left: P = .0009, right: P = .00253). No significant association between WKG or GT and craniofacial morphology was found. CONCLUSIONS: Thin GP is associated with skeletal Class I and III for the left MCI. Thin GP is associated with hypodivergent and normodivergent skeletal patterns for the MCIs. There was no association between WKG and GT and craniofacial morphology in both skeletal and vertical dimensions. Dental compensations that exist due to different craniofacial morphology may influence the GP.

Craniofacial Morphology of Temporomandibular Disorder Patients with Different Disc Positions: Stratifying Features Based on Sex and Sagittal Skeletal Pattern.

Disc displacement (DD) appears in the majority of temporomandibular disorder (TMD) patients. The correlation between craniofacial morphology and different disc positions has been underlined, while the craniofacial morphological differences based on sex and sagittal skeletal pattern stratification have been insufficiently studied. In this study, 304 patients with TMD complaints were included and classified into normal position, disc displacement with reduction (DDwR) and disc displacement without reduction (DDwoR) groups according to magnetic resonance imaging. A total of 24 cephalometric measurements, covering the cranial base, vertical relationship, sagittal relationship, mandible position and morphology, and dental relationship, were assessed using lateral cephalograms. A stratified analysis was performed based on the sex and sagittal skeletal pattern. Overall, DD patients had distinctive craniofacial morphological features. The posterior cranial base length and mandibular arc angle were statistically different only in females, while the Y-axis angle, occlusal plane angle and sella nasion point A angle (SNA) might be unique features in males. Skeletal class II had the most statistically different measurements compared to the others. Differences in the Frankfort mandibular incisor angle (FMIA) and saddle angle were especially displayed in skeletal class III patients. The sex and skeletal sagittal pattern could affect the morphological differences in TMD patients with different disc positions.

Effects of Class II elastics during growth on the functional occlusal plane according to skeletal pattern and extraction vs nonextraction.

OBJECTIVES: To investigate the effect of Class II intermaxillary elastics on the functional occlusal plane (FOP) of growing patients. MATERIALS AND METHODS: A total of 50 participants aged 11 to 16 years were selected from a university clinic archive >1-year after treatment and after undergoing 6 months of Class II elastic wear, taking pretreatment (T0) and posttreatment (T1) lateral cephalometric radiographs, and consenting to participate at recall (T2). Participants were divided into 3 groups according to skeletal pattern or into 2 groups according to treatment with extraction (E) or nonextraction (NE). Angular changes of FOP relative to the Sella-Nasion (SN), mandibular plane (MP), and Frankfort horizontal (FH) were compared within and between groups. RESULTS: A statistically significant reduction of FOP-SN/FH, but not of FOP-MP, was found from T0-T1-T2 when all patients were grouped together. FOP-SN/MP/FH was significantly the largest in the patients with a hyperdivergent skeletal pattern, but lowest in the patients with a hypodivergent skeletal pattern at T0, T1, and T2 (P < .032). FOP-MP at T0-T2 was statistically larger in group E than in group NE (P < .02). No differences were found for FOP changes (change before treatment minus after treatment and change after treatment minus 1 year after treatment) between different skeletal patterns (P > .433) and treatment groups (P > .193). CONCLUSIONS: Use of Class II elastics during the growth period was not found to show adverse effects on FOP rotation. Neither skeletal pattern nor treatment modality differed in the response to Class II elastics with regard to FOP changes. Individual patient growth pattern must be taken into consideration when treatment planning the use of Class II elastics. Orthodontists should take into account individual skeletal and growth patterns while using Class II elastics.

The effect of treatment timing on clinical and psychological outcomes with Twin Block therapy: A multicentre two-arm parallel randomised controlled trial.

OBJECTIVE: To evaluate whether delaying treatment with a twin block appliance affects treatment outcomes, in terms of skeletal and dental change and psychological disadvantage. DESIGN: Multicentre, two-arm parallel randomised controlled trial. SETTING: Three UK hospital orthodontic units. METHODS: A total of 75 participants were randomly allocated into an Immediate Treatment Group (ITG) (n= 41) and an 18-month delayed Later Treatment Group (LTG) (n=34). OUTCOMES: Dentofacial changes were recorded from lateral cephalograms and study models, psychological impact was measured using a child perception questionnaire (CPQ11-14) and an Oral Aesthetic Subjective Impact Score (OASIS) at registration (DC1), 18 months (DC2) and 3 years (DC3). RESULTS: The ITG initial effect was a mean ANB reduction was 1.6° (P<0.001) (95% confidence interval [CI] = 0.89-2.29), and an overjet reduction of 5.06 mm (P<0.001) (95% CI = 3.96-6.16) (boys: aged 12 years 8 months; girls: aged 11 years 8 months). There were no statistically significant differences between the ITG and LTG for twin block treatment outcomes, but the ITG active treatment time was longer (P=0.004) (ITG: 13.1 months; LTG: 9.8 months). There was insufficient evidence to state that patients were psychologically disadvantaged by waiting 18 months for active twin block treatment (P>0.05). CONCLUSION: Participants achieved similar clinical and psychological outcomes irrespective of whether they started their twin block at the age of referral (ITG) or 18 months later (LTG). This suggests that boys aged 12 years 8 months and girls aged 11 years 8 months, on average, are not disadvantaged by waiting 18 months for active twin block treatment.

Measurement of buccolingual inclination of posterior teeth and the curve of Wilson in patients with different sagittal skeletal patterns using cone-beam computed tomography / 口腔疾病防治

Objective@# To study the buccolingual inclination of posterior premolars and molars and the curve of Wilson in patients with different sagittal skeletal patterns, to explore the compensation mechanism of horizontal inclination of posterior teeth in patients with different sagittal skeletal patterns and to provide a reference for the control of posterior tooth inclination in the treatment of bone malocclusion.@*Methods@#This study was reviewed and approved by the Ethics Committee, and informed consent was obtained from the patients. Ninety CBCT scans of adults and ninety scans of adolescents before orthodontic treatment were evaluated in this cross-sectional study. There were 30 skeletal Class I, Class Ⅱ, and Class Ⅲ patients in the adult group and adolescent group. The inclination angles of posterior teeth and the curve of Wilson of first and second molars were measured, and data were analyzed between adolescents and adults with different sagittal skeletal patterns.@*Results @#Compared with skeletal Class Ⅰ adult patients, the upper posterior molar inclination of skeletal Class Ⅱ patients was significantly lower, and the lower posterior molar inclination was significantly higher. Compared with skeletal ClassⅠ adult patients, the upper posterior molar inclination of skeletal Class Ⅲ adult patients was higher, and the lower posterior molar inclination was significantly lower. The Wilson curve of the second molar in skeletal Class Ⅱ adult patients was significantly higher than that in the other groups. Compared with skeletal ClassⅠ adolescent patients, skeletal Class Ⅲ adolescent patients had a significantly higher upper posterior molar inclination; however, no difference was found between the inclination of the posterior teeth between skeletal Class Ⅰ, Class Ⅱ and Class Ⅲ adolescent patients. Comparing adolescent and adult samples, in skeletal Class Ⅱ patients, adults showed more lingual inclination than adolescents in the upper posterior teeth and less lingual inclination in the lower posterior teeth except for the mandibular first molar. Comparing adolescent and adult samples, in skeletal Class Ⅲ patients, adults showed more lingual inclination than adolescents in the lower posterior teeth except for the mandibular second molars and showed no difference in the upper posterior teeth.@*Conclusions@#The inclination of the posterior teeth and the curve of Wilson show significant differences between the three sagittal skeletal patterns. Compared with those of skeletal Class Ⅰ patients, the posterior teeth of skeletal Class Ⅱ patients show more lingual inclination in the upper arch and less lingual inclination in the lower arch. Meanwhile, posterior teeth of skeletal Class Ⅲ patients show more lingual inclination in the lower arch and maintain the inclination in the upper arch.

Orthodontic and Orthognathic Treatment Combined withSurgically Assisted Rapid Maxillary Expansion in an Adult Patient with a Hyperdivergent Skeletal Pattern.

In this case study, we report the successful treatment of a 35-year-old woman with a hyperdivergent skeletal pattern, open bite and severe transverse deficiency, exhibiting a skeletal Class III malocclusion. The treatment plan included 3D correction of these issues with surgically assisted rapid maxillary expansion (SARME) to solve the transverse deficiency, presurgical orthodontic treatment including aligning and levelling of the teeth in both arches, LeFort I osteotomy and bilateral sagittal split ramus osteotomy, and postsurgical correction of malocclusion. Orthodontic treatment was performed with labial brackets, and the patient achieved satisfactory occlusion and a significantly improved facial profile. Retention at the 1-year follow-up showed stable occlusion and arch forms with a harmonious facial profile.

A CBCT Evaluation of Esthetic Preference Regarding the Perceived Facial Attractiveness of Young Korean Female Adults with a Normal Skeletal Pattern.

The aim of this study was to determine the factors that affect esthetic preference regarding the perceived facial attractiveness of young Korean female adults with a normal skeletal pattern using cone-beam computed tomography (CBCT). After reorienting the CBCT images of 40 young Korean female adults, three-dimensional (3D) measurements were analyzed, and five 3D facial images were digitally constructed. A computer-based questionnaire was used to determine perceived facial attractiveness by scoring from 1 (very unattractive) to 10 (very attractive). Esthetic perception and the most influential facial view and component were examined and compared by orthodontists, general dentists, and laypeople to evaluate facial attractiveness. Compared to the unattractive group, the attractive group had significantly greater values for Pog-NB, L1SI-FH, U lip thickness, L lip-U lip, and Nasolabial angle, along with significantly lower values for U1SI-FH and Cant of U lip; the attractive group also had a more retruded U1MP (p < 0.01), L1MP (p < 0.01), U lip (p < 0.05), and L lip (p < 0.01) relative to N, as well as a more retruded U lip (p < 0.05) and L lip (p <0.001) relative to esthetic lines. Orthodontists and general dentists were more likely to consider the profile view. When evaluating facial attractiveness, orthodontists and laypeople more often focused on the lips and chin. When evaluating facial attractiveness, all evaluators showed a high esthetic preference for retroclination and retrusion of the incisors and lips, but there were some differences in how they perceived facial attractiveness. Therefore, the ultimate perception of facial attractiveness needs to be based on the esthetic perceptions of laypeople.

Cranial base parameters in adults with skeletal class I and class II skeletal pattern.

OBJECTIVE: Cranial base parameters exhibit wide variations. This study evaluated cranial base morphological characteristics of class II and class I malocclusions to identify risk factors for class II skeletal malocclusions. METHODS: In this cross-sectional study, we recruited 30 class I adults and 30 class II adults and collected their lateral cephalograms. The cranial base length was calculated by measuring the base of the skull by determining the length of sella-to-nasion, basion to pterygomaxillary fissure, and pterygomaxillary fissure to point A. The cranial base angle was measured by the angle formed by the basion, sella, and nasion, and the base of the angle, which connects the basion and nasion, was measured. RESULTS: The independent t-test for combined values showed no significant differences in one angular and five linear measures between groups. However, one angular measurement was positively correlated when men and women in class I and class II groups were analyzed separately. CONCLUSION: Male patients with class II patterns exhibited larger cranial base angles than did those with class I patterns. Our study suggested that cranial base features have a minimal role in the development of class II malocclusions.

Three-dimensional mandibular characteristics in skeletal malocclusion : A cross-sectional study.

PURPOSE: We aimed to comprehensively analyse a possible correlation between skeletal malocclusions, gender and mandibular characteristics in all three dimensions in adults and to identify mandibular characteristics that are typical for extreme skeletal patterns. METHODS: A 3D model of the skull was calculated in 111 adult patients (mean age = 27.0 ± 10.2 years; 49 women, 62 men) from available computed tomography or cone beam computed tomography scans of their heads. Based on the 3D models, the skeletal patterns were examined in (a) the transversal dimension regarding asymmetry according to menton deviation, (b) the sagittal dimension according to the Wits appraisal and (c) the vertical dimension according to the maxillomandibular plane angle. The mandibular characteristics assessed were linear (ramus height and width, body length), angular (ramus, gonial and body angle) and volumetric (ramus/mandibular volume, body/mandibular volume) parameters. RESULTS: No correlation between transversal skeletal asymmetry and mandibular characteristics were found, while sagittal (F(16, 174) = 3.32, p < 0.001, η2 = 0.23) and vertical (F(16, 174) = 3.18, p < 0.001, η2 = 0.23) skeletal patterns were shown to have a significant effect on the mandible. Gender correlated with mandibular characteristics independently from the skeletal pattern. Discriminant analysis revealed that class II and III patients differed in ramus and body angle with class II patients showing higher angles (ramus angle: class II = 89.8 ± 3.9° vs. class III = 84.4 ± 4.8°; body angle: class II = 87.7 ± 4.8° vs. class III = 82.1 ± 5.2°). Hypo- and hyperdivergent patients were discriminated by gonial angle, body angle and body/mandibular volume with hyperdivergent patients having a greater gonial and body angle and body/mandibular volume (gonial angle: hypodivergent = 114 ± 9.3° vs. hyperdivergent = 126.4 ± 8.6°; body angle: hypodivergent = 82.9 ± 4.4° vs. hyperdivergent = 87.7 ± 6.5°; body/mandibular volume: hypodivergent = 72.4 ± 2.7% vs. hyperdivergent = 76.2 ± 2.6%). CONCLUSION: When analysing 3D data for treatment planning of adult patients, the orthodontist should pay attention to angular and volumetric characteristics of the mandible to identify extreme skeletal sagittal or vertical malocclusions.

Evaluation of associations between condylar morphology, ramus height, and mandibular plane angle in various vertical skeletal patterns: a digital radiographic study.

BACKGROUND: To evaluate condylar morphology, ramus height, and asymmetry indexes in patients with different vertical skeletal patterns and to determine the association between condylar and ramal measurements with the mandibular plane angle. METHODS: Dental panoramic radiographs of 60 patients with different skeletal patterns were evaluated. According to the cranial base (Sella-Nasion)-mandibular plane (SN-MP) angle, the patients were divided into three groups: normal angle (NA), low angle (LA), and high angle (HA). The condylar area, condylar perimeter, condylar heights, and ramus height were measured, and the asymmetry index value of each measurement was calculated. A one-way analysis of variance as well as a post hoc Tukey and Kruskall-Wallis tests were used to determine intergroup differences. Pearson's correlation coefficient was used to determine the relationship between all measurements and SN-MP. RESULTS: The intergroup comparison of condylar area, condylar perimeter, condylar heights, and ramus height measurements showed that the patients in the LA group have statistically significantly greater values compared to those in the HA group. A statistically significant difference was detected between the NA and LA groups only in the condylar area measurements. There was no statistical difference only in the ramus height measurements between the NA and HA groups. Asymmetry index values of the groups were similar. The negative correlations were found between all measurements and the SN-MP angle. CONCLUSION: HA individuals have lower ramus heights and smaller condylar morphologies than NA and LA individuals. In addition, as the SN-MP angle increases, the condyle dimensions and ramus height decrease, and this is a clinically important finding.

A Comparative Assessment of the Upper Pharyngeal Airway Dimensions among Different Anteroposterior Skeletal Patterns in 7-14-Year-Old Children: A Cephalometric Study.

BACKGROUND: The pharyngeal airway is a crucial part of the respiratory system's function. Assessing the pharyngeal airway dimensions in different skeletal types is important in the orthodontic treatment of growing patients. The aim of this study was to compare the upper pharyngeal airway dimensions of 7-14-year-old children with different skeletal types. METHODS: Three-hundred-sixty-one lateral cephalometric radiographs were grouped based on their skeletal patterns determined by the ANB angle as skeletal type I (n = 123), type II (n = 121), and type III (n = 117). The radiographs were divided into 4 groups: 7/8 YO (7-8 years old), 9/10 YO, 11/12 YO, and 13/14 YO. The cephalometric measurements comprised SNA, SNB, ANB, Ad1-PNS, Ad2-PNS, McUP, and McLP. An ANOVA was used to compare the group results. RESULTS: Significant differences in Ad1-PNS, Ad2-PNS, McUP, and McLP in skeletal types II and III were found between age groups. Most upper pharyngeal airway dimensions in skeletal types II and III children were significantly wider in the 13/14 YO group than in the other age groups. CONCLUSION: The upper pharyngeal airway dimensions increased age-dependently in 7-14-year-old children, especially in skeletal types II and III. The upper pharyngeal airway dimensions could serve as a guide in differentiating the different skeletal classes in clinical settings.

Mandibular retromolar space in adults with different sagittal skeletal patterns.

OBJECTIVES: To analyze the mandibular retromolar space among normal-divergent adult patients with different sagittal skeletal patterns by cone-beam computed tomography (CBCT). MATERIALS AND METHODS: CBCTs of a total of 120 normal-divergent adult patients were investigated. Patients were categorized into the following three groups according to their ANB angle: skeletal Class I (48 patients), skeletal Class II (36 patients), and skeletal Class III (36 patients). Four different planes parallel to the mandibular occlusal plane were used to measure the retromolar space. The retromolar space was measured by two reference lines and then compared between different sagittal skeletal patterns groups. The incidence of root contact with the inner lingual cortex was compared among the three groups. RESULTS: The retromolar space of the Class III patients was significantly larger than that of Class I patients and Class II patients. Compared with Class I and Class III patients, Class II patients had a smaller retromolar space and higher incidence of contact with the inner cortex of the mandible. CONCLUSIONS: Class III patients had a larger retromolar space than Class I patients and Class II patients in four different planes. The mandibular retromolar space should be evaluated by CBCT in patients who need mandibular molar distalization.

Automatic Classification for Sagittal Craniofacial Patterns Based on Different Convolutional Neural Networks.

(1) Background: The present study aims to evaluate and compare the model performances of different convolutional neural networks (CNNs) used for classifying sagittal skeletal patterns. (2) Methods: A total of 2432 lateral cephalometric radiographs were collected. They were labeled as Class I, Class II, and Class III patterns, according to their ANB angles and Wits values. The radiographs were randomly divided into the training, validation, and test sets in the ratio of 70%:15%:15%. Four different CNNs, namely VGG16, GoogLeNet, ResNet152, and DenseNet161, were trained, and their model performances were compared. (3) Results: The accuracy of the four CNNs was ranked as follows: DenseNet161 > ResNet152 > VGG16 > GoogLeNet. DenseNet161 had the highest accuracy, while GoogLeNet possessed the smallest model size and fastest inference speed. The CNNs showed better capabilities for identifying Class III patterns, followed by Classes II and I. Most of the samples that were misclassified by the CNNs were boundary cases. The activation area confirmed the CNNs without overfitting and indicated that artificial intelligence could recognize the compensatory dental features in the anterior region of the jaws and lips. (4) Conclusions: CNNs can quickly and effectively assist orthodontists in the diagnosis of sagittal skeletal classification patterns.

Comparative assessment of various cephalometric facial planes with intercanine width in orthodontic patients.

OBJECTIVE: The study was conducted to evaluate the relationship of various cephalometric skeletal patterns in the vertical and anteroposterior planes with intercanine width in untreated orthodontic patients. METHOD AND MATERIAL: This study included dental cast and cephalometric radiographs of 100 patients (69 females and 31 males) of the age range 13 to 33 years. Skeletal parameters including SNA, SNB, SNMP angles were found from lateral cephalometric radiographs. Intercanine widths including upper intercanine widths (UICW) and lower intercanine widths (LICW) were measured by a digital caliper. RESULTS: The correlation of intercanine width with SNA, SNB, and SNMP angles was analyzed by applying Pearson correlation coefficient. According to statistical analysis, the only insignificant correlation was analyzed between UICW with SNB and LICW with SN-MP. CONCLUSIONS: The overall result showed statistically significant relationship of various cephalometric skeletal patterns in the sagittal and vertical planes with intercanine width.