Scanning electron microscopic analysis of 5% glycolic acid as a novel alternative to 17% ethylenediaminetetraacetic acid in root biomodification: An in vitro study.

Background: Nonsurgical periodontal therapy results in the formation of a smear layer which inhibits tissue regeneration. Root biomodification (RB) using various agents has been tried for the enhancement of new attachment formation. However, no substantial therapeutic advantages of currently available root conditioning agents have been reported emphasizing the need for additional biologically acceptable agents. Glycolic acid (GA) due to its antimicrobial nature and ability of initiation and proliferation of fibroblasts may potentially modify root surface enabling regeneration. Materials and Methods: Eighty specimens from 40 single-rooted teeth were treated with 17% ethylenediaminetetraacetic acid (EDTA) and 5% GA and scanning electron microscopy analysis was done. The micrographs were examined for the evaluation of smear layer removal, total number of dentinal tubules, total number of patent dentinal tubules, mean diameter and surface area of dentinal tubules, and dentin erosion. Statistical analysis was done using unpaired t-test for intergroup comparison. Results: The efficacy of smear layer removal (P = 0.01) and dentin erosion (P = 0.042) was significantly better in the GA group. Both the groups showed no difference in dentinal tubule-related parameters. Conclusion: GA showed improved RB with greater smear layer removal and lesser dentin erosion, indicating its use as a potent alternative to the conventional EDTA root conditioning.

Root surface biomodification in periodontal therapy: Biological rationale and clinical applications.

Regenerative periodontal therapy aims to form new cementum, periodontal ligament, and alveolar bone, all sealed by gingival tissue. The root surface acts as the wound margin during this regeneration process. Root surface biomodification (root conditioning/root decontamination), therefore, seems instrumental in promoting surface decontamination and enhancing tissue attachment by removing the smear layer, exposing collagen fibrils, and facilitating blood clot formation and stabilization. This review attempted to provide an all-encompassing, evidence-based assessment of the role of root surface biomodification in regenerative periodontal therapy, particularly in intrabony defects, furcation defects, and root coverage procedures. The reviewed evidence suggested that root conditioning agents, whether used independently or in conjunction with bone graft materials, biological agents, membranes, or connective tissue grafts, do not offer any clinical advantage regarding clinical attachment gain. Thus, integrating chemical methods with the mechanical root instrumentation process does not necessarily contribute to superior clinical outcomes.

Assessment of Smear Layer Removal and Penetration Depth of Root Canal Irrigant Using Different Irrigation Activation Systems: A Comparative Study.

AIM: The aim of the current study was to evaluate the penetration depth and smear layer removal of root canal irrigant using various irrigation activation techniques. MATERIALS AND METHODS: In this investigation, sixty single-rooted premolars extracted for orthodontic purposes were chosen. Diamond burs were used to create an access cavity, and #10 K-file was used to determine the patency. About sixty samples were divided into the following three groups (20 samples in each group), group I: Irrigation with conventional needle, group II: Activation of EndoVac system, group III: Passive ultrasonic irrigation (PUI). The efficacy of the smear layer was assessed using a scanning electron microscopy at a ×2000 magnification. One-way ANOVA was used to record and analyze the data. All statistical analyses were performed with a significance level of p < 0.05. RESULTS: At coronal third, the maximum smear layer was removed in group II (1.26 ± 0.02) followed by group III (1.84 ± 0.16) and group I (2.89 ± 0.21). At middle third, smear layer removal was maximum in group I (1.18 ± 0.10) followed by group III (1.72 ± 0.09) and group I (2.66 ± 0.18). At apical third, the more smear layer was removed in group II (1.02 ± 0.01) followed by group III (1.58 ± 0.08) and group I (2.38 ± 0.06). There was a highly significant difference found between the three different irrigation systems at all three levels (p < 0.001). CONCLUSION: In conclusion, every irrigation device that was evaluated was successful in removing the smear layer from the root canal. However, the EndoVac system group removed a greater amount of smear layer compared with PUI and conventional needle group. CLINICAL SIGNIFICANCE: With the goal of promoting cleaning that is beyond the ability of mechanical devices, irrigation is a crucial part of root canal therapy. If an efficient irrigation delivery system is used, the irrigants can reach the working length (WL). This type of distribution system needs to provide a suitable amount of irrigants up to the WL, as well as have enough flow and be effective at debriding the entire canal system. How to cite this article: Pujari MD, Das M, Das A, et al. Assessment of Smear Layer Removal and Penetration Depth of Root Canal Irrigant Using Different Irrigation Activation Systems: A Comparative Study. J Contemp Dent Pract 2024;25(4):331-334.

Evaluation of the Smear Layer Removal Ability of Various Rotary Files with/without Chemical Agents on Primary Teeth: An In Vitro Study.

AIM: The aim of the current study was to assess the cleaning and smear layer removal efficacy of two different rotary files with or without chemical agents on primary teeth. MATERIALS AND METHODS: For the study, 90 extracted primary maxillary incisors without internal or external resorption and with at least two-thirds of complete roots were chosen. Then, based on the kind of instruments used to clean and shape the canals, they were randomly assigned to three experimental groups, each consisting of 30 teeth. Group-I: The canal was instrumented manually with K-files, Group-II: The canal was instrumented with Kedo-S files, Group-III: The canal was instrumented with Kedo-SG Blue files. After the canals were finally instrumented, 2 mL of QMixTM solution was used to irrigate 15 samples from each group. The samples were subsequently allowed to remain in the canals for 90 seconds in order to eliminate the smear layer. After that a stereomicroscope was used to assess the cleaning effectiveness. RESULTS: With irrigant solution, the highest mean value was found in manual K-files (2.86 ± 0.34), followed by Kedo-S files group (1.34 ± 0.26) and Kedo-SG Blue files (1.28 ± 0.18). Without irrigant solution, the highest mean value was found in manual K-files (2.92 ± 0.22) followed by Kedo-S files group (1.44 ± 0.18) and Kedo-SG Blue files (1.36 ± 0.14). There was a statistically significant difference found at all the three levels. CONCLUSION: On conclusion, the current study's findings demonstrated that irrigation solution was significantly more effective in cleaning and removing smear layers from pediatric rotary files than manual K-files. CLINICAL SIGNIFICANCE: The effectiveness of endodontic therapy depends on a successful chemomechanical preparation. The canals are instrumented using either hand files or rotary instruments; there are several irrigation and instrumentation techniques. In order to completely sterilize the canals, chemical agents are utilized for irrigation during instrumentation. Due to their numerous biological, antibacterial, anti-inflammatory, and antioxidant qualities, many natural compounds are also utilized as irrigants. How to cite this article: Abushanan A. Evaluation of the Smear Layer Removal Ability of Various Rotary Files with/without Chemical Agents on Primary Teeth: An In Vitro Study. J Contemp Dent Pract 2024;25(4):354-357.

Impact of different agitation methods on smear layer cleaning of mesial canals with accentuated curvature.

Objectives: This study evaluated the impact of different methods of irrigant agitation on smear layer removal in the apical third of curved mesial canals of 3 dimensionally (D) printed mandibular molars. Materials and Methods: Sixty 3D-printed mandibular second molars were used, presenting a 70° curvature and a Vertucci type II configuration in the mesial root. A round cavity was cut 2 mm from the apex using a trephine of 2 mm in diameter, 60 bovine dentin disks were made, and a smear layer was formed. The dentin disks had the adaptation checked in the apical third of the teeth with wax. The dentin disks were evaluated in environmental scanning electron microscope before and after the following irrigant agitation methods: G1(PIK Ultrasonic Tip), G2 (Passive Ultrasonic Irrigation with Irrisonic- PUI), G3 (Easy Clean), G4 (HBW Ultrasonic Tip), G5 (Ultramint X Ultrasonic tip), and G6 (conventional irrigation-CI) (n = 10). All groups were irrigated with 2.5% sodium hypochlorite and 17% ethylenediaminetetraacetic acid. Results: All dentin disks were 100% covered by the smear layer before treatment, and all groups significantly reduced the percentage of the smear layer after treatment. After the irrigation protocols, the Ultra-X group showed the lowest coverage percentage, statistically differing from the conventional, PIK, and HBW groups (p < 0.05). There was no significant difference among Ultramint X, PUI-Irrisonic, and Easy Clean (p > 0.05). None of the agitation methods could remove the smear layer altogether. Conclusions: Ultramint X resulted in the most significant number of completely clean specimens.

Effect of Chitosan Irrigant and Lubricating Gel on Bond Strength of Resin Sealer to Radicular Dentin: An In Vitro Study.

BACKGROUND: The adhesive strength of sealers to dentin is influenced by various factors, and the presence of a smear layer is among the critical variables. Chitosan, known for its dentin compatibility, has previously demonstrated a reduction in dentin change and resin sealer bond strength comparable to ethylenediaminetetraacetic acid (EDTA) when used as an irrigant and final rinse. The study investigates the impact of chitosan, used as both a lubricating gel and final rinse, on the push-out bond strength of resin sealer. MATERIALS AND METHOD: Forty single-rooted premolar teeth, each with a fully formed root and a single root canal, were collected post-extraction. During canal preparation, 1 ml sodium hypochlorite (3%) was used for irrigation at every change of instrument, followed by applying specific chelating gel and final rinse for each experimental group. The groups included: Group 1 (17% EDTA chelating gel, final rinse with saline), Group 2 (17% EDTA chelating gel, final rinse with 17% EDTA solution), Group 3 (chitosan chelating gel, final rinse with saline solution), and Group 4 (chitosan chelating gel, final rinse with 0.2% chitosan solution), 10 specimens in each group. After obturation, specimens were sealed and incubated for a week at 37°C with 100% humidity. The universal testing machine was used for push-out tests, and specimens were examined using a scanning electron microscope (SEM) to identify various types of bond failure. RESULTS: Among the four groups, Group 2 exhibited the highest mean push-out bond strength (7.33 ± 0.26 MPa), followed by Group 4 (5.33 ± 0.25 MPa), Group 1 (4.61 ± 0.30 MPa), and Group 3 (2.94 ± 0.32 MPa). The variations in bond strength suggest a notable impact of the chelating agents and final rinse solutions on the resin sealer's interaction with dentin. CONCLUSION: The study concludes that the use of EDTA as both a lubricating gel and a final rinse significantly enhances push-out bond strength, outperforming chitosan in this study. Groups with saline as the final rinse (Group 1 and Group 3) exhibited the least bond strength, highlighting the importance of the final rinse in root canal therapy.

A Comparative Evaluation of Efficacy of Root Surface Biomodification using MTAD, MTAD+I-PRF on Adhesion of Fibrin Clot to Dentin Sem Study.

Root biomodifiers help in removing the smear layer following mechanical debridement. In this context, we evaluated and compared the in vitro efficacy of MTAD, MTAD+I-PRF, and phosphate-buffered saline-conditioned dentin surfaces by examining the distribution of the fibrin network using scanning electron microscopy. It was concluded that MTAD can serve as a potentially useful root conditioner/biomodifier. Further, the adjunct of MTAD+I-P resulted in more fibrin network linkage on the dentinal surface when compared to MTAD alone which can be of great utility in Advanced Regenerative Therapy.

Comparative evaluation of smear layer removal by using different irrigant activation techniques: An in vitro scanning electron microscopic study.

Aim: This in vitro study aims to assess and compare the effectiveness of different irrigation activation techniques in removing the smear layer from the root canal dentin using Scanning electron microscope (SEM) analysis. Materials and Methods: A total of 60 extracted single-rooted premolar with straight canal and mature apex were used for this study. After the selection of teeth, all the samples were decoronated followed by biomechanical preparation. The sample after preparation was irrigated with sodium hypochlorite and randomly divided into three groups with 20 sample in each group (n = 20), (Group 1) control, (Group 2) ultrasonic, and (Group 3) laser. The irrigant activation was done in all the groups and then sample was prepared for the scanning electron microscope analysis. Statistical Analysis: The statistical analysis was performed using the Mann-Whitney-U-test. Results: The findings suggested that the diode laser irrigant activation technique was superior to the ultrasonic and conventional techniques to eradicate smear layers. Conclusion: With the limitation of this study, diode laser activation showed better cleaning of root dentinal walls compared to ultrasonic activator and traditional method.

High-Intensity Focused Ultrasound in Dentistry: A Literature Review.

Although high-intensity focused ultrasound (HIFU) has been applied widely in medicine, utilising its non-invasive dual ablation and thermal coagulation properties, its application in dentistry has primarily remained in the research phase, predominantly in in vitro studies. Nonetheless, there has been a consistent increase in the number of publications on this subject in recent decades, focusing on areas such as remineralisation of dentine surfaces, removal of smear layers, drug delivery, and microbial elimination. The number of advantages HIFU can offer, such as its non-surgical nature, absence of ionising radiation, lack of residue, and absence of aerosols, is driving this upward trend, indicating the potential for HIFU in clinical dentistry and ongoing efforts towards developing HIFU-based devices for routine dental use. This succinct review aims to outline the historical context, operational mechanisms of HIFU, summarise recent dental research, and provide a forward-looking perspective on the role of HIFU in modern clinical dentistry.

Canal disinfection using Nd: YAG Laser, synchronized microbubble-photodynamic activation, and carbon quantum dots on microhardness, smear layer removal, and extrusion bond strength of zirconia post to canal dentin. An invitro scanning electron microscopic analysis.

Evaluation of the impact of the latest root canal disinfectant, that is carbon quantum dots (CQDs), synchronized microbubble-photodynamic activation (SYMPA), and Nd: YAG laser along with ethylenediaminetetraacetic acid (EDTA) as a final irrigant on the Marten hardness (MH), smear layer (SL) removal, and extrusion bond strength (EBS) of zirconia post to the canal dentin. Eighty intact single-rooted premolars were obtained and disinfected using 0.5% chloramine-T solution. Root canal preparation was performed using ProTaper files followed by obturation. The post space was prepared for prefabricated zirconia post and all the teeth were randomly divided into four groups based on the disinfection used (n = 20 each) Group 1: 5.25% NaOCl + 17% EDTA (Control), Group 2: Nd: YAG laser + 17% EDTA, Group 3: SYMPA + 17% EDTA, and Group 4: CQDs + 17% EDTA. MH, SL removal, and EBS of zirconia post-bonded to root dentin were performed using a microhardness tester, scanning electron microscope (SEM), and universal testing machine, respectively. Both intragroup and intergroup comparisons were performed using one-way analysis of variance (ANOVA) and posthoc-Tukey test for significant difference (p < .05). Group 2 samples (Nd: YAG laser + 17% EDTA) (0.24 ± 0.06 GPa) exhibited highest values of MH. Samples in group 3 (SYMPA + 17% EDTA) treated teeth unveiled the lowest MH scores (0.13 ± 0.02 GPa). Moreover, the coronal third of Group 3 specimens (SYMPA and 17% EDTA) (1.54 ± 0.31) eliminated SL from the canal with the greatest efficacy as well as presented the highest EBS (10.13 ± 0.69 MPa). However, the apical third of Group 1 samples (5.25% NaOCl + 17% EDTA) (2.95 ± 0.33) exhibited the least efficient elimination of SL from the radicular dentin as well as the lowest bond strength (5.11 ± 0.19 MPa) of zirconia post to the dentin. The SYMPA technique with 17% EDTA proved highly effective in removing the SL from canal dentin and enhancing the EBS of zirconia posts. The least preferable method for SL removal and MH improvement was found to be 5.25% NaOCl + 17% EDTA. CQDs and Nd: YAG laser demonstrated satisfactory smear layer removal properties from the canal, along with achieving appropriate bond strength of zirconia posts. RESEARCH HIGHLIGHTS: Nd: YAG laser and 17% EDTA as canal disinfectant exhibited the highest values of MH. Specimens irrigated with SYMPA and 17% EDTA eliminated SL from the canal with the greatest efficacy. The coronal third of Group 3 (SYMPA + 17% EDTA) samples unveiled the highest zirconia post-bond integrity score to the canal dentin. Cohesive failure was a dominant failure type among different experimental groups.

Debris and Smear Layer Removal in Curved Root Canals: A Comparative Study of Ultrasonic and Sonic Irrigant Activation Techniques.

The aim of this study was to compare the cleaning efficacy of three irrigant activation devices with a control of non-activated syringe and needle irrigation in curved root canals. Sixty human curved roots were endodontically prepared and divided into four groups (n = 15) with similar root curvature distributions. Final irrigation using 4% NaOCl was performed with a syringe and needle (30-G) alone, or with Eddy sonic powered irrigation system (polymeric tip #0.25/0.06), Endosonic ultrasonic activation (polymeric tip #0.25/0.03), or Irrisafe ultrasonic activation (stainless-steel tip, #0.25/0.00). SEM was used to evaluate cleaning efficacy, employing five-score systems for debris and smear layer. While no significant difference in debris removal was observed between Endosonic or Irrisafe activation and non-activated irrigation, Eddy sonic powered irrigation system significantly improved debris removal in the apical third of curved root canals. Smear layer removal was effective in coronal and mid-root sections for all groups but less so in the apical third. Thus, Eddy sonic powered irrigation system demonstrated higher efficacy in removing debris from the apical third of curved root canals compared with non-activated syringe and needle irrigation. However, all three irrigant activation systems exhibited no difference from the non-activated control in smear layer removal.

The Influence of Nickel-Titanium (Ni-Ti) Rotary Instrument Systems on Debris and Smear Layer Formation in Endodontic Procedures: An In Vitro Scanning Electron Microscopy Study.

Background Successful endodontic treatment relies on the effective removal of debris and the prevention of smear layer formation within the root canals. The choice of nickel-titanium (Ni-Ti) rotary instrument systems can significantly impact these outcomes. Aim This study aims to evaluate and compare the debris and smear layer formation in root canals of extracted mandibular second premolar teeth following instrumentation with the ProTaper Universal (Dentsply Sirona, Charlotte, NC) (Group II), Twisted File (Kerr Endodontics, Gilbert, AZ) (Group III), and XP Endo (FKG Dentaire, La Chaux-de-Fonds, Switzerland) (Group IV) Ni-Ti rotary instrument systems. Methods In this in vitro study, 60 extracted mandibular second premolar teeth were randomly divided into four groups, each containing 15 teeth. Group I served as the control with no instrumentation. Groups II, III, and IV were instrumented with the ProTaper Universal rotary file, the Twisted File, and the XP Endo file systems, respectively. Debris and smear layer formation were evaluated through scanning electron microscopy (SEM), and photomicrographs were scored using a standardized index. Results Group II (ProTaper) exhibited the highest mean debris and smear layer scores, with values of 3.50 and 2.70, respectively. Group IV (XP Endo) demonstrated the least debris and smear layer formation, with mean scores of 2.65 and 2.08, respectively. Statistical analysis confirmed significant differences among the groups for both debris and smear layer formation. Conclusion The results highlight the practical importance of selecting appropriate Ni-Ti rotary instrument systems to minimize debris and smear layer formation during endodontic procedures. The XP Endo file system showed promise as a favorable choice in this regard, but further clinical research is needed to validate these findings.

Assessment of the Smear Layer Removal Efficacy of Three Different Agents on Periodontally Compromised Tooth: An In Vitro Study.

AIM: The purpose of the present study was to evaluate the smear layer removal efficacy of three various agents on periodontally compromised tooth. MATERIALS AND METHODS: The current study included 75 molar teeth that were extracted due to periodontal disease. After that, 25 samples were randomly assigned using a simple random technique to the three different agent groups, group A: Scaling and root planing (SRP) and application of SofScale agent, group B: SRP and application of QMix agent, group C: SRP and application of MTAD agent. Using a diamond circular saw, the treated portions were divided into horizontal and vertical halves. All samples were viewed under Scanning Electron Microscope. Every tooth was focused at the coronal third, middle third, and apical third portion with a magnification of 1000×. Data were recorded and statistically analyzed. RESULTS: The smear layer removal efficacy was more in the QMix agent (3.06 ± 0.04) group followed by MTAD agent (3.28 ± 0.09) and SofScale agent (4.14 ± 0.10) group on the root surface. On intra group comparison, there was a statistically significant difference found in all the intra group agents with all the three levels. On inter group evaluation, at coronal third, there was no significant difference found between the different agents. There was a significant difference found between the different agents at middle and coronal third. CONCLUSION: On conclusion, the current investigation found that, the root surfaces treated with QMix shown a greater ability to remove smear layers compared to tooth surfaces treated with MTAD and SofScale agent. CLINICAL SIGNIFICANCE: Conventional therapies such as SRP effectively eliminate calculus, plaque, and necrosed cementum; nevertheless, they leave behind a smear layer that could impede normal healing. In an effort to overcome this, root conditioning agents were applied on the root surface to remove the smear layer. The traditional root conditioning agents such as citric acid have certain disadvantages, though, such as an acidic pH that could harm the root surface. As a result, researchers have been looking for biocompatible root conditioning treatments that are more effective. How to cite this article: Singh DK, BS Raj H, Soans CR, et al. Assessment of the Smear Layer Removal Efficacy of Three Different Agents on Periodontally Compromised Tooth: An In Vitro Study. J Contemp Dent Pract 2024;25(2):156-159.

Glycolic acid on push-out bond strength of fiber post and smear removal: an in vitro study.

This study aims to investigate glycolic acid (GA) as a final irrigant on push-out bond strength of fiber post and smear removal. Ninety mandibular premolars were stabilized with a silicone key and photographed, and canal cross-section was calculated by image processing software. Round canal morphology was selected. The specimens were divided into five groups (n = 18); 10%GA, 17%EDTA, NaOCl + 10%GA, NaOCl + 17%EDTA, and the control. Fifteen specimens were used for the push-out. Three specimens were evaluated using a scanning electron microscope after post space preparation. Two-way ANOVA and Chi-square were used for statistics. GA presented higher strength than EDTA (p < 0.05). The NaOCl + GA showed higher strength than the NaOCl + EDTA (p < 0.05). The highest values were observed in cervical and lowest in apical thirds (p < 0.05). The most failure type was between dentin and resin (p < 0.05). GA removed the smear in the post space including the apical third. The NaOCl + GA has superiority to NaOCl + EDTA on push-out strength. Glycolic acid improved the bond strength of fiber post when used as a final post space irrigant. The combination of NaOCl and glycolic acid did not negatively affect the bond strength and was more effective compared to the combination with EDTA. Glycolic acid improved the bond strength of fiber post when used as a final post space irrigant. The combination of NaOCl and glycolic acid did not negatively affect the bond strength and was more effective compared to the combination with EDTA.

Canal disinfection using photo-chemically activated micro-bubble emulsion, Emblica officinalis, and Nd: YAP laser on smear layer and push-out bond strength of resin-based root canal sealer to the radicular dentin.

AIMS: Evaluation of the effects of the latest root canal disinfectants i.e., Micro-bubble emulsion (MBE), Neodymium-doped yttrium aluminum perovskite (Nd: YAP), Emblica officinalis (E. officinalis) on the removal of smear layer (SL) and push out bond strength (PBS) of resin-based root canal sealer to the radicular dentin. METHODS: The coronal portion of sixty single-rooted human mandibular premolar teeth was precisely sectioned at the cementoenamel junction. The canals were prepared to utilize ProTaper universal rotary files till F3. All the study specimens were divided into four groups based on the disinfection regime (n = 15) Group 1: 5.25% NaOCl, Group 2: MBE, Group 3: Nd: YAP laser and Group 4: E. officinalis extract. All the canals were then finally irrigated using 17% EDTA solution as a final disinfecting agent. SL removal assessment was performed on five samples from each group using a scanning electron microscope (SEM). Ten samples from each group were then filled with root canal filling material and the roots were sectioned. Push-out test and failure mode analysis were performed using the universal testing machine (UTM) and stereomicroscope respectively. The mean scores of PBS and SL removal were compared using a one-way analysis of variance (ANOVA) and Post Hoc Tukey's HSD test p = 0.05. RESULTS: Group-2 (MBE + EDTA) coronal section (1.50 ± 0.23) exhibited the most effective eradication of SL from the canal space. The apical third of Group-1 (NaOCl+EDTA) (2.68 ± 0.82) samples demonstrated the least effective removal of SL from the radicular canal. The maximum score of PBS of AH plus sealer to the canal dentin was exhibited by the coronal section of Group-2 (MBE + EDTA) (9.55 ± 0.45 MPa) samples. However, the apical third of Group-1 (NaOCl+ EDTA) specimens (5.16 ± 0.32 MPa) demonstrated the minimum EBS. CONCLUSION: MBE+ EDTA displayed better smear layer removal and bond integrity of AH plus sealer to the root canal dentin. Nd: YAP+ EDTA laser and E.officinalis displayed comparable outcomes to that of control NaOCl+ EDTA.

Comparison of Easydo Activator, ultrasonic and needle irrigation techniques on sealer penetration and smear layer removal in vitro.

The effects of Easydo Activator (EA), a new sonic irrigation system, on sealer penetration at the root apex were compared to needle irrigation (NI) and passive ultrasonic irrigation (PUI) in this study. Forty-two single-rooted teeth were prepared and randomly divided into three groups (n = 14): group 1: NI; group 2: PUI; and group 3: EA. A solution of 3% sodium hypochlorite (NaOCl) was used for irrigation. Nine teeth in each group were filled with AH Plus sealer mixed with CY5 fluorescent dye and a single gutta-percha cone. The sealer penetration area, maximum penetration depth and percentage of sealer penetration at 5 mm and 1 mm from the apex were analyzed by confocal laser scanning microscopy (CLSM). The remaining 5 teeth in each group were subjected to test smear layer scores by scanning electron microscopy (SEM). The CLSM evaluation showed that increases in the area, depth and percentage of sealer penetration were detected at 1 and 5 mm from the root apex in the PUI group compared with the NI group, and greater increases were observed in the EA group (P < 0.05). The SEM experiment showed that the lowest scores for the smear layer and debris removal were achieved by the EA group when compared with the PUI and NI groups (P < 0.05). In conclusion, EA was superior to PUI and NI regarding sealer penetration at the root apex during endodontic treatment, and it could provide a new technical idea for clinical root canal therapy.

Micromorphology of Root Canal Walls After Laser Activated Irrigation.

This study aims to investigate the effects of laser-activated irrigation on root canal dentin using different laser wavelengths. Sixty-six roots were prepared and split longitudinally. First, lasers with different power settings were tested on 34 samples, pre-etched with phosphoric acid, or remaining with a smear-layer to determine the test parameters. Selected parameters were then applied on thirty roots (9 groups) covered with smear layer: 1. Smear-layer removed; 2. Smear-layer untouched; 3. Conventional needle irrigation with NaOCl and EDTA; 4. ER:YAG laser; 5. 9.3 µm CO2 laser; 6-9. Diode lasers. All lasers were applied in ultra-pure water as an irrigant. Root halves were examined by scanning electron microscope to analyze the intracanal dentin micromorphology on 9 consequent photos per specimen @ a magnification of 1000X. The results showed that conventional needle irrigation was effective in removing the smear-layer from coronal and middle root parts, while laser-activated irrigation had two main mechanisms: cleaning and opening of the dentinal tubules by removing the smear layer (Er:YAG laser) and melting of dentin (CO2 and diode lasers) in all root parts. The study concluded that laseractivated irrigation with different wavelengths impacted the smear layer and root canal dentin differently through pure physical/mechanical effects.

The comparative of chitosan and chitosan nanoparticle versus ethylenediaminetetraacetic acid on the smear layer removal: A systematic review and meta-analysis of in vitro study.

The purpose of this systematic review of meta-analysis was to compare the effectiveness of removing the smearing layer using EDTA versus Chitosan (Ch) and Chitosan nanoparticles (Ch-NPs). A search was performed in four electronic databases (Web of Science, PubMed, Scopus, and Cochrane). The included studies were assessed by two reviewers using Joanna Briggs Institute's critical appraisal checklist for the quasi-experimental studies. Outcomes obtained by scanning electron microscopy (SEM) and conventional methods were presented as standardized mean differences alongside 95% confidence intervals. Seven investigations employed 212 single-root teeth. In the apical section (p = .317, 95% CI = -0.820 to 0.266, Tau2 = 0.387), middle segment (p = .914, 95% CI = -1.019 to 0.912, Tau2 = 1.027), and coronal segment (p = .277, 95% CI = -1.008 to 0.289, Tau2 = 0.378). This meta-analysis found no difference between Ch, Ch-NPs, and EDTA in removing the smear layer in the three segments. This systematic review is designed to show evidence related to the PICO question, in which our outcome is smear layer removal and not the clinical success of such a treatment. RESEARCH HIGHLIGHTS: The study aimed to compare the effectiveness of chitosan and chitosan nanoparticles with ethylenediaminetetraacetic acid (EDTA) in removing the smear layer, a layer of debris and organic material on the tooth surface, through a systematic review and meta-analysis. The removal of the smear layer is crucial for successful dental treatments, as it enhances the adhesion of restorative materials and improves the penetration of antimicrobial agents into dentinal tubules. The researchers conducted a systematic review and meta-analysis, searching various databases of electron microscopy results for relevant in vitro studies comparing the effects of chitosan or chitosan nanoparticles with EDTA on smear layer removal. The results encourage further exploration of chitosan and chitosan nanoparticles for clinical use in dentistry, while considering their specific applications and long-term effects.

Evaluation of the effect of graphene oxide-based nanocomposites on smear layer by a scanning electron microscope: Laboratory investigation.

This study is to examine the effect of graphene oxide (GO) and GO-based nanocomposites (GO_EDTA, GO_CHIT) on the smear layer by scanning electron microscopy (SEM). Sixty human single-rooted anterior teeth were used. Samples were randomly categorised into six groups. Distilled water in group 1, 17% EDTA in group 2, chitosan (CHIT) solution in group 3, GO solution in group 4, GO_EDTA solution in group 5 and GO_CHIT in group 6 were used as irrigation solutions. Photomicrographs were acquired from the coronal, middle and apical parts of the samples by SEM. Statistical analyses were performed using Kruskal-Wallis, Mann-Whitney U and Wilcoxon tests. There was a statistically significant difference among the groups (p < 0.003). Adding GO to CHIT and EDTA did not affect removing the smear layer in all segments (p < 0.003). Incorporating GO into EDTA and CHIT solutions did not change their interaction with the smear layer.

To etch or not to etch, Part III: On the hydrophobic-rich content and fatigue strength of universal adhesives after long-term ageing.

OBJECTIVES: To examine whether dentin-etching extension and/or the hydrophobic-rich content of hybrid layers would affect fatigue strengths of a mild universal adhesive after long-term aging. METHODS: Twin-bonded resin-dentin interfaces were produced by etching sound midcoronal dentin beams with 32 % ortho-phosphoric acid for 15 s (OPA15s), 3 s (OPA3s) or 10 % meta-phosphoric acid for 15 s (MPA15s). Samples were bonded with a mild universal adhesive with or without additional coating using a solvent-free bisGMA-based bonding resin. Self-etch application served as control. Composite buildups were made with a nanofilled composite. Bar-shaped twin-bonded interfaces (0.9 × 0.9 × 12 mm) were aged for two years in artificial saliva at 37 â„ƒ and tested under 4-point flexure at quasi-static (n = 16) and cyclic loads (n = 35) until failure. The stress-life fatigue behavior was evaluated using the staircase method at 4 Hz. Crack initiation and fracture patterns were evaluated by SEM. Cyclic-loaded data was analyzed by Kruskal-Wallis on Ranks (α = 0.05). RESULTS: Significantly higher fatigue life distributions and higher endurance limits were observed for less aggressive etch-and-rinse protocols (OPA3s and MPA15s) after long-term ageing. Hydrophobic-rich coating produced 20-32 % higher endurance limits, prevented micrometer-sized porosities at bonded interfaces, reduced etching-associated variability and lowered crack formation. Significance Long-term hydrolysis produces detrimental effects on the fatigue strength of resin-dentin interfaces. The bond-promotion effect of less aggressive etch-and-rinse protocols and the creation of hybrid layers with higher hydrophobic-rich content are critical to extend the durability of mild universal adhesives. Therefore, current oversimplification trends in adhesive dentistry may limit resin-dentin bonding performance.