Effect of bittern immersion on textural properties and water-holding capacity in beef.

Hard meat has low market value; hence, we used bittern as a novel meat tenderizer for bovine M. semitendinosus, one of a hard muscle. We investigated the effects of beef immersion in bittern, a basic solution primarily comprising MgCl2, on textural properties and water-holding capacity. Muscle samples from M. semitendinosus of Holstein steers were immersed in seven different solutions (RO, NaCl, MgCl2, red wine, pH 3, bittern, and pH 8) and heated at 80°C for 5min. The pH of the beef and immersion solutions, water-holding capacity, and maximum load of the meat were measured. Although beef immersed in red wine (pH 3) had a lower pH and water-holding capacity, that immersed in bittern (pH 8.4) had a higher pH and higher water holding capacity. These results indicate that immersion in acidic red wine may harden beef and that immersion in basic bittern may be more effective in maintaining water-holding capacity and softening beef.

One N-glycan regulates natural killer cell antibody-dependent cell-mediated cytotoxicity and modulates Fc γ receptor IIIa / CD16a structure.

Both endogenous antibodies and a subset of antibody therapeutics engage Fc gamma receptor (FcγR)IIIa / CD16a to stimulate a protective immune response. Increasing the FcγRIIIa/IgG1 interaction improves the immune response and thus represents a strategy to improve therapeutic efficacy. FcγRIIIa is a heavily glycosylated receptor and glycan composition affects antibody-binding affinity. Though our laboratory previously demonstrated that natural killer (NK) cell N-glycan composition affected the potency of one key protective mechanism, antibody-dependent cell-mediated cytotoxicity (ADCC), it was unclear if this effect was due to FcγRIIIa glycosylation. Furthermore, the structural mechanism linking glycan composition to affinity and cellular activation remained undescribed. To define the role of individual amino acid and N-glycan residues we measured affinity using multiple FcγRIIIa glycoforms. We observed stepwise affinity increases with each glycan truncation step with the most severely truncated glycoform displaying the highest affinity. Removing the N162 glycan demonstrated its predominant role in regulating antibody-binding affinity, in contrast to four other FcγRIIIa N-glycans. We next evaluated the impact of the N162 glycan on NK cell ADCC. NK cells expressing the FcγRIIIa V158 allotype exhibited increased ADCC following kifunensine treatment to limit N-glycan processing. Notably, an increase was not observed with cells expressing the FcγRIIIa V158 S164A variant that lacks N162 glycosylation, indicating the N162 glycan is required for increased NK cell ADCC. To gain structural insight into the mechanisms of N162 regulation, we applied a novel protein isotope labeling approach in combination with solution NMR spectroscopy. FG loop residues proximal to the N162 glycosylation site showed large chemical shift perturbations following glycan truncation. These data support a model for the regulation of FcγRIIIa affinity and NK cell ADCC whereby composition of the N162 glycan stabilizes the FG loop and thus the antibody-binding site.

Determination of standard molar volume of 1-hexyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide on titanium dioxide surface.

The fluids near the solid substrate display different properties compared to the bulk fluids owing to the asymmetric interaction between the fluid and substrate; however, to the best of our knowledge, no work has been conducted to determine the interfacial properties of fluids experimentally. In this work, we combined a pycnometer with experimental measurements and data processing to determine the standard thermodynamic properties of interfacial fluids for the first time. In the study, 1-hexyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([Hmim][NTf2]) and titanium dioxide (P25) were chosen as the probes to prove the concept. It was found that, with the combination of the Gay-Lussac pycnometer and the colligative law, together with selecting a suitable solvent, it is possible and reliable to determine the standard molar volume of the immobilized [Hmim][NTf2]. Compared to the bulk phase, the molar volumes of [Hmim][NTf2] on the P25 surface reduce by 20.8%-23.7% at temperatures from 293.15 to 323.15 K, and the reduction degrees decrease with increasing temperatures. The newly determined standard thermodynamic data was used to obtain the model parameters of hybrid electrolyte perturbed-chain statistical associating fluid theory density functional theory (ePC-SAFT-DFT), and further predictions of the density of interfacial ionic liquids with different film thicknesses were proved to be reliable in comparison with the experiment results.

Modulate synthesis of CeMn solid solution using various alcohols for toluene catalytic oxidation: synergistic effect of Ce-Mn and reaction mechanism.

A redox co-precipitation method was employed to synthesize CeMn homogeneous solid solutions, utilizing various alcohols as activating agents. Ethanol effectively orchestrated the precipitation of CeO2 and MnOx, promoting their co-growth. As a result, the CeMn-EA achieved 90 % toluene conversion at 218 â„ƒ (T90 =218 â„ƒ) with a weight hourly space velocity (WHSV) of 48000 ml/(g·h). It also demonstrated high adaptability to increased WHSV, suggesting its potential for industrial-scale applications. The uniform dispersion of Ce and Mn accelerated the coupling between Ce3+/Ce4+ and Mn4+/Mn3+, engineering numerous oxygen vacancies, which enhanced the activation of gas-phase oxygen and the mobility of lattice oxygen. In situ DRIFTS confirmed that toluene oxidation accommodated both Langmuir-Hinshelwood (L-H) and Mars-van Krevelen (MvK) mechanisms, with benzoate identified as a pivotal intermediate. Enhanced oxygen mobility facilitated the cleavage of the benzene ring, which was the rate-determining step. Additionally, the introduction of H2O significantly enhanced the dissociation and adsorption of toluene and facilitated the activation of gas-phase oxygen. At higher temperatures, H2O could further activate lattice oxygen engaging in toluene oxidation. ENVIRONMENTAL IMPLICATION: Volatile organic compounds (VOCs) have emerged as major air pollutants due to the changes in air pollution patterns. They can act as precursors to near-surface ozone and haze. Toluene, a typical VOC, is primarily released from anthropogenic sources and poses significant risks to human health and the environment. Ce-based catalysts have been demonstrated efficiency in toluene oxidation due to their excellent oxygen storage and release properties. This study synthesized CeMn homogeneous solid solutions utilizing various alcohols as activating agents, which possessed abundant oxygen vacancies and optimum oxygen activation capacity to oxidize toluene in time.

Photo-switching Operation of MoS2 Field Effect Transistor by Photoisomerization of Azobenzene in Solution Delivered on a Microfluidic Platform.

Combining the photoisomerization of molecules with an electrical device is important for developing optoelectronic devices. Field effect transistors (FETs) with atomically thin channels are suitable for this purpose because the FET properties respond to chemical changes in molecules. Since the photoisomerization wavelength of the switching molecules can be tuned, complex logic operations can be realized if a specific molecule is delivered to the target FET of an integrated circuit. However, conventional techniques for transferring molecules, such as drop casting and sublimation, cannot efficiently realize this goal. In this study, we fabricated a MoS2 FET device combined with a microfluidic platform, wherein the MoS2 channel was in contact with the flow of an azobenzene solution in isopropyl alcohol as the solvent. UV radiation (365 nm) and thermal relaxation realize the cycle of trans- and cis-azobenzene states and the switching of the substantial FET properties. This study demonstrated the feasibility of using the solution for optical switching of the MoS2-FET, which can realize quick phase changes in the molecule and the delivery of the molecule to the target FET by a microfluidic platform. .

Scalable Fabrication of Quasi-One-Dimensional van der Waals Ta2Pt3Se8 Nanowire Thin Films via Solution Processing for NO2 Gas Sensing over Large Areas.

Solution-based processing of van der Waals (vdW) one- (1D) and two-dimensional (2D) materials is an effective strategy to obtain high-quality molecular chains or atomic sheets in a large area with scalability. In this work, quasi-1D vdW Ta2Pt3Se8 was exfoliated via liquid phase exfoliation (LPE) to produce a stably dispersed Ta2Pt3Se8 nanowire solution. In order to screen the optimal exfoliation solvent, nine different solvents were employed with different total surface tensions and polar/dispersive (P/D) component (P/D) ratios. The LPE behavior of Ta2Pt3Se8 was elucidated by matching the P/D ratios between Ta2Pt3Se8 and the applied solvent, resulting in N-methyl-2-pyrrolidone (NMP) as an optimal solvent owing to the well-matched total surface tension and P/D ratio. Subsequently, Ta2Pt3Se8 nanowire thin films are manufactured via vacuum filtration using a Ta2Pt3Se8/NMP dispersion. Then, gas sensing devices are fabricated onto the Ta2Pt3Se8 nanowire thin films, and gas sensing property toward NO2 is evaluated at various thin-film thicknesses. A 50 nm thick Ta2Pt3Se8 thin-film device exhibited a percent response of 25.9% at room temperature and 32.4% at 100 °C, respectively. In addition, the device showed complete recovery within 14.1 min at room temperature and 3.5 min at 100 °C, respectively.

Photoelectrochemical Solution Gated Graphene Field-Effect Transistor Functionalized by Enzymatic Cascade Reaction for Organophosphate Detection.

Solution Gated Graphene Field-Effect Transistors (SGGT) are eagerly anticipated as an amplification platform for fabricating advanced ultra-sensitive sensors, allowing significant modulation of the drain current with minimal gate voltage. However, few studies have focused on light-matter interplay gating control for SGGT. Herein, this challenge is addressed by creating an innovative photoelectrochemical solution-gated graphene field-effect transistor (PEC-SGGT) functionalized with enzyme cascade reactions (ECR) for Organophosphorus (OPs) detection. The ECR system, consisting of acetylcholinesterase (AChE) and CuBTC nanomimetic enzymes, selectively recognizes OPs and forms o-phenylenediamine (oPD) oligomers sediment on the PEC electrode, with layer thickness related to the OPs concentration, demonstrating time-integrated amplification. Under light stimulation, the additional photovoltage generated on the PEC gate electrode is influenced by the oPD oligomers sediment layer, creating a differentiated voltage distribution along the gate path. PEC-SGGT, inherently equipped with built-in amplification circuits, sensitively captures gate voltage changes and delivers output with an impressive thousandfold current gain. The seamless integration of these three amplification modes in this advanced sensor allows a good linear range and highly sensitive detection of OPs, with a detection limit as low as 0.05 pm. This work provides a proof-of-concept for the feasibility of light-assisted functionalized gate-controlled PEC-SGGT for small molecule detection.

Oxygenated versus non-oxygenated flush out during deceased donor liver procurement: The first proof-of-concept study in humans.

BACKGROUND: Liver transplantation is used for treating end-stage liver disease, fulminant hepatitis, and oncological malignancies and organ shortage is a major limiting factor worldwide. The use of grafts based on extended donor criteria have become internationally accepted. Oxygenated machine perfusion technologies are the most recent advances in organ transplantation; however, it is only applied after a period of cold ischemia. Due to its high cost, we aimed to use a novel device, OxyFlush®, based on oxygenation of the preservation solution, applied during liver procurement targeting the maintenance of ATP during static cold storage (SCS). METHODS: Twenty patients were randomly assigned to the OxyFlush or control group based on a 1:1 ratio. In the OxyFlush group, the perfusion solution was oxygenated with OxyFlush® device while the control group received a non-oxygenated solution. Liver and the common bile duct (CBD) biopsies were obtained at three different time points. The first was at the beginning of the procedure, the second during organ preparation, and the third after total liver reperfusion. Biopsies were analyzed, and adenosine triphosphate (ATP) levels and histological scores of the liver parenchyma and CBD were assessed. Postoperative laboratory tests were performed. RESULTS: OxyFlush® was able to maintain ATP levels during SCS and improved the damage caused by the lack of oxygen in the CBD. However, OxyFlush® did not affect laboratory test results and histological findings of the parenchyma. CONCLUSION: We present a novel low-cost device that is feasible and could represent a valuable tool in organ preservation during SCS.

Selection of an alternate cementitious mortar using ceramic tile dust waste: a hybrid MCDM approach.

Selection of a suitable alternative material from a pool of alternatives with many conflicting criteria becomes a Multi-Criteria Decision Making (MCDM) problem. In the present study, ternary blended mortars were prepared using ceramic tile dust waste (CTD), fly ash (FA), and ground granulated blast furnace slag (GGBFS) as binder components. Crusher dust (CD) was used as a fine aggregate component. Binder to aggregate ratios of 1:3 and 1:1 were prepared considering suitable flow. A total of 16 mortar mixes were cast. These mortars were tested for various conflicting criteria compressive strength, flexural strength, porosity, water absorption, bulk density, thermal conductivity, specific heat, thermal diffusivity, and thermal effusivity whose weightages obtained were 29.09%, 20.08%, 12.77%, 10.60%, 8.74%, 6.74%, 5.54%, 4.47%, and 1.97%, respectively, as per AHP analysis. Later, considering these different criteria and alternate mortars, it was observed that a 1:1 mortar with 20% CTD, 30% FA, and 50% GGBFS (RC20F30G50) is found to be the suitable mortar with the highest relative closeness coefficient of 0.861 and the highest net outranking flow of 0.316 with respect to MCDM techniques: technique for order of preference by similarity to ideal solution (TOPSIS) and preference ranking organization method for enrichment of evaluations (PROMETHEE-II), respectively. The ranking of the mortar in both methods complies with the relative weightages of the criteria and the performance of the mortars with respect to the above criteria.

A robust triphenylamine-based monolithic polymer network for selective sieving of CO2 and PM from flue gas.

The increasingly urgent issue of climate change is driving the development of carbon dioxide (CO2) capture and separation technologies in flue gas after combustion. The monolithic adsorbent stands out in practical adsorption applications for its simplified powder compaction process while maintaining the inherent balance between energy consumption for regeneration and selectivity for adsorption. However, optimizing the adsorption capacity and selectivity of CO2 separation materials remains a significant challenge. Herein, we synthesized monolithic polymer networks (N-CMPs) with triphenylamine adsorption sites, acid-base environment tolerance, and precise narrow microchannel pore systems for the selective sieving of CO2 and particulate matter (PM) in flue gas. The inherent continuous covalent bonding of N-CMPs, along with their highly delocalized π-π conjugated porous framework, ensures the stability of the monolithic polymer network's adsorption and separation capabilities under wet and acid-base conditions. Specifically, under the conditions of 1 bar at 273 K, the CO2 adsorption capacity of N-CMP-1 is 3.35 mmol/g. Attributed to the highly polar environment generated by triphenylamine and the inherent high micropore/mesopore ratio, N-CMPs exhibit an excellent ideal adsorbed solution theory (IAST) selectivity for CO2/N2 under simulated flue gas conditions (CO2/N2 = 15:85). Dynamic breakthrough experiments further visualize the high separation efficiency of N-CMPs in practical adsorption applications. Moreover, under acid-base conditions, N-CMPs achieve a capture efficiency exceeding 99.76 % for PM0.3, enabling the selective separation of CO2 and PM in flue gas. In fact, the combined capture of hazardous PM and CO2 from the exhaust gases produced by the combustion of fossil fuels will play a pivotal role in mitigating climate change and environmental issues until low-carbon and alternative energy technologies are widely adopted.

Effects of Balanced Versus Saline-based Solutions on Acute Kidney Injury in Off-pump Coronary Artery Bypass Surgery: A Randomized Controlled Trial.

OBJECTIVES: To determine whether balanced solutions can reduce the incidence of acute kidney injury after off-pump coronary artery bypass surgery compared with saline. DESIGN: Randomized controlled trial. SETTING: Single tertiary care center. PARTICIPANTS: Patients who underwent off-pump coronary artery bypass surgery between June 2014 and July 2020. INTERVENTIONS: Balanced solution-based chloride-restrictive intravenous fluid strategy. MEASUREMENTS AND MAIN RESULTS: The primary outcome was acute kidney injury within 7 postoperative days, as defined by the 2012 Kidney Disease: Improving Global Outcomes Clinical Practice Guideline. The incidence of acute kidney injury was 4.4% (8/180) in the balanced group and 7.3% (13/178) in the saline group. The difference was not statistically significant (risk difference, -2.86%; 95% confidence interval [CI], -7.72% to 2.01%; risk ratio, 0.61, 95% CI, 0.26 to 1.43; p = 0.35). Compared with the balanced group, the saline group had higher levels of intraoperative serum chloride and lower base excess, which resulted in a lower pH. CONCLUSIONS: In patients undergoing off-pump bypass surgery with a normal estimated glomerular filtration rate, the intraoperative balanced solution-based chloride-restrictive intravenous fluid administration strategy did not decrease the rate of postoperative acute kidney injury compared with the saline-based chloride-liberal intravenous fluid administration strategy.

[Three-component tear substitute as preoperative support in glaucoma surgery]. / Primenenie trekhkomponentnogo slezozamenitelya v meditsinskom soprovozhdenii khirurgii glaukomy.

PURPOSE: This study investigates the effect of preoperative preparation with the three-component tear substitute Stillavit on the outcomes of glaucoma surgery in patients on long-term topical glaucoma therapy. MATERIAL AND METHODS: The study included 63 patients (63 eyes) with glaucoma, among them 30 (30 eyes) were women and 33 (33 eyes) were men. Group 1 consisted of 33 patients (33 eyes) receiving long-term topical antihypertensive therapy with preservatives and tear substitute Stillavit 3 times a day for 1 month as preoperative preparation. Group 2 included 30 patients (30 eyes) receiving similar antihypertensive therapy who were not prescribed preoperative medications. All patients underwent a comprehensive ophthalmological examination and computer tomography of the filtering blebs (FB) on Visante system (Carl Zeiss Meditec, Germany) before surgery, as well as 1 week, 1, 3, and 6 months after surgery. RESULTS: Mean intraocular pressure (IOP) elevation at 6 months postoperatively was significantly higher in the group that did not undergo preoperative preparation with a tear substitute, compared to the group of patients who received the tear substitute Stillavit preoperatively. According to anterior segment optical coherence tomography, a greater number of favorable diffuse FB were noted in the group that received the tear substitute Stillavit in preparation for surgery - 87.9%, while in group 2 (without preparation) - 66.7%. Odds ratio calculation between the two groups revealed that preoperative preparation with the tear substitute Stillavit reduced the odds of IOP elevation to 20 mm Hg or higher at 3 months postoperatively by more than 10 times. CONCLUSION: The use of tear substitute Stillavit in preparation for anti-glaucoma surgery reduces the chances of IOP elevation in the early postoperative period by more than 10 times, which may indicate a reduction in the rate of FB scarring due to the beneficial effect of the drug's components on the precorneal tear film.

Highly Stretchable and Oriented Wafer-Scale Semiconductor Films for Organic Phototransistor Arrays.

Stretchable organic phototransistor arrays have potential applications in artificial visual systems due to their capacity to perceive ultraweak light across a broad spectrum. Ensuring uniform mechanical and electrical performance of individual devices within these arrays requires semiconductor films with large-area scale, well-defined orientation, and stretchability. However, the progress of stretchable phototransistors is primarily impeded by their limited electrical properties and photodetection capabilities. Herein, wafer-scale and well-oriented semiconductor films were successfully prepared using a solution shearing process. The electrical properties and photodetection capabilities were optimized by improving the polymer chain alignment. Furthermore, a stretchable 10 × 10 transistor array with high device uniformity was fabricated, demonstrating excellent mechanical robustness and photosensitive imaging ability. These arrays based on highly stretchable and well-oriented wafer-scale semiconductor films have great application potential in the field of electronic eye and artificial visual systems.

Unfolding the Challenges To Prepare Single Crystalline Complex Oxide Membranes by Solution Processing.

The ability to prepare single crystalline complex oxide freestanding membranes has opened a new playground to access new phases and functionalities not available when they are epitaxially bound to the substrates. The water-soluble Sr3Al2O6 (SAO) sacrificial layer approach has proven to be one of the most promising pathways to prepare a wide variety of single crystalline complex oxide membranes, typically by high vacuum deposition techniques. Here, we present solution processing, also named chemical solution deposition (CSD), as a cost-effective alternative deposition technique to prepare freestanding membranes identifying the main processing challenges and how to overcome them. In particular, we compare three different strategies based on interface and cation engineering to prepare CSD (00l)-oriented BiFeO3 (BFO) membranes. First, BFO is deposited directly on SAO but forms a nanocomposite of Sr-Al-O rich nanoparticles embedded in an epitaxial BFO matrix because the Sr-O bonds react with the solvents of the BFO precursor solution. Second, the incorporation of a pulsed laser deposited La0.7Sr0.3MnO3 (LSMO) buffer layer on SAO prior to the BFO deposition prevents the massive interface reaction and subsequent formation of a nanocomposite but migration of cations from the upper layers to SAO occurs, making the sacrificial layer insoluble in water and withholding the membrane release. Finally, in the third scenario, a combination of LSMO with a more robust sacrificial layer composition, SrCa2Al2O6 (SC2AO), offers an ideal building block to obtain (001)-oriented BFO/LSMO bilayer membranes with a high-quality interface that can be successfully transferred to both flexible and rigid host substrates. Ferroelectric fingerprints are identified in the BFO film prior and after membrane release. These results show the feasibility to use CSD as alternative deposition technique to prepare single crystalline complex oxide membranes widening the range of available phases and functionalities for next-generation electronic devices.

Soil solution chemistry weak response to long-term N addition points towards a strong resilience of northeastern American forests to past and future N deposition.

Northern temperate and boreal forests are large biomes playing crucial ecological and environmental roles, such as carbon sequestration. Despite being generally remote, these forests were exposed to anthropogenic nitrogen (N) deposition over the last two centuries and may still experience elevated N deposition as human activities expand towards high latitudes. However, the impacts of long-term high N deposition on these N-limited forest ecosystems remain unclear. For 18 years, we simulated N deposition by chronically adding ammonium nitrate at rates of 3 (LN treatment) and 10 (HN treatment) times the ambient N deposition estimated at the beginning of the experiment at a temperate sugar maple and a boreal balsam fir forest site, both located in northeastern America. LN and HN treatments corresponded respectively to addition of 26 kgN·ha-1·yr-1 and 85 kgN·ha-1·yr-1 at the temperate site and 17 kgN·ha-1·yr-1 and 57 kgN·ha-1·yr-1 at the boreal site. Between 2002 and 2018, soil solution was collected weekly during summer and concentrations of NO3-, NH4+, Ca2+ and pH were measured, totalling ~12,700-13,500 observations per variable on the study period. N treatments caused soil solution NO3-, NH4+ and Ca2+ concentrations to increase while reducing its pH. However, ion responses manifested through punctual high concentration events (predominantly on the HN plots) that were very rare and leached N quantity was extremely low at both sites. Therefore, N addition corresponding to 54 years (LN treatment) and 180 years (HN treatment) of accelerated ambient N deposition had overall small impacts on soil solution chemistry. Our results indicate an important N retention of northeastern American forests and an unexpected strong resilience of their soil solution chemistry to long-term simulated N deposition, potentially explained by the widespread N-limitation in high latitude ecosystems. This finding can help predict the future productivity of N-limited forests and improve forest management strategies in northeastern America.

In a rat model of bypass DuraGraft ameliorates endothelial dysfunction of arterial grafts.

Coronary artery bypass surgery can result in endothelial dysfunction due to ischemia/reperfusion (IR) injury. Previous studies have demonstrated that DuraGraft helps maintain endothelial integrity of saphenous vein grafts during ischemic conditions. In this study, we investigated the potential of DuraGraft to mitigate endothelial dysfunction in arterial grafts after IR injury using an aortic transplantation model. Lewis rats (n = 7-9/group) were divided in three groups. Aortic arches from the control group were prepared and rings were immediately placed in organ baths, while the aortic arches of IR and IR + DuraGraft rats were preserved in saline or DuraGraft, respectively, for 1 h before being transplanted heterotopically. After 1 h after reperfusion, the grafts were explanted, rings were prepared, and mounted in organ baths. Our results demonstrated that the maximum endothelium-dependent vasorelaxation to acetylcholine was significantly impaired in the IR group compared to the control group, but DuraGraft improved it (control: 89 ± 2%; IR: 24 ± 1%; IR + DuraGraft: 48 ± 1%, p < 0.05). Immunohistochemical analysis revealed decreased intercellular adhesion molecule-1, 4-hydroxy-2-nonenal, caspase-3 and caspase-8 expression, while endothelial cell adhesion molecule-1 immunoreactivity was increased in the IR + DuraGraft grafts compared to the IR-group. DuraGraft mitigates endothelial dysfunction following IR injury in a rat bypass model. Its protective effect may be attributed, at least in part, to its ability to reduce the inflammatory response, oxidative stress, and apoptosis.

The dark side of the wool? From wool wastes to keratin microfilaments through the solution blow spinning process.

The valorization of discarded wool from dairy sheep breeding is a challenging issue. The most proposed strategies lie in the processing of keratin extracted from wool without reducing the molecular weight of the protein chains (the high molecular weight-HMW keratin). Here, the HMW keratin has been spun for the first time by solution blow spinning. A screening study of the process carried out with a 2-level full factorial design revealed that keratin filaments can be obtained by using the polyethylene oxide at 900 kDa, a 2 bar air pressure, and a 30 cm needle-collector distance. An annealing at 80 °C for 15 min, at pH 3.5 with citric acid contributes to increasing the viscosity of the keratin solutions thereby allowing the production of defect-free and water-stable filaments having diameters from 1 to 6 µm. A negligible toxic effect was observed after 24 and 48 h on HT29 epithelial cells and normal blood cells displayed behavior similar to the control demonstrating that the patches are hemocompatible. Therefore, the developed SBS process of keratin aqueous solutions could represent a valuable platform for developing patches that need to be blood-contacting and deposited in-situ.

Bacterial contamination in contact lens training area in private optical clinics.

BACKGROUND: Contamination in the contact lens training area could be due to bacteria, which can lead to the major consequence of ocular infections. We aimed to investigate the contamination caused by bacteria in the contact lens training area in private optical clinics of the Udupi district, India. METHODS: A cross-sectional study evaluated the swabs from the contact lens container, contact lens solution tip, washing area and lens fitting area for bacterial contamination. Twenty swabs collected from different areas of five optical clinics were inoculated in Brain heart infusion broth (BHIB). The broth was streaked in MacConkey and Blood agar and incubated at standard conditions for the growth of bacteria. All isolates were identified using conventional culture methods, and Gram staining was performed. RESULTS: Twenty samples (contact lens case, n = 5; contact lens solution tip, n = 5; washing area, n = 5; cleaning towel, n = 5) from private optical clinics were recruited for the study. Bacterial growth was indicated in which lactose fermentation was seen at (15%), non-lactose fermentation at (35%), and no bacterial growth at (50%) in MacConkey agar. Partial or alpha-hemolytic (α hemolysis) was seen in (5%), complete or beta-hemolytic (ß hemolysis) was seen in (40%), no hemolysis or gamma hemolysis (Ï« haemolysis), was seen in (30%), no growth was seen in (25%) on blood agar. Gram-positive cocci (45%), Gram-negative bacilli (20%), and no increase in (35%) were observed in MacConkey agar and Blood agar. Bacterial species were not identified in this study. CONCLUSION: Contamination was found in lenses, solution tips, washing areas, and cleaning towels which might lead to ocular infections. Perception should be given to those responsible for fitting lenses.

Development of an Artificial White Spot Lesion Creation Protocol: A Preliminary Study.

BACKGROUND AND OBJECTIVES: Protocols that determine the lesion depth of specific demineralization solutions are lacking. This in vitro study aimed to evaluate various lesion depths of artificial white spot lesions (WSLs) at different exposure times.  Materials and methods: Artificial WSLs were created by placing 30 extracted human premolar teeth into 0.05M acetate buffer solution with a controlled environment of pH 4.4 at 37ºC, which were then exposed in the solution for various durations of 4, 5, 6, 8, 10, and 12 days. The specimens were visually examined using the Ekstrand-Ricketts-Kidd (ERK) system to confirm the WSL, followed by buccolingual sectioning, and evaluated under a scanning electron microscope (SEM) to measure the lesion depth. RESULTS: The SEM showed that the mean lesion depths of representative specimens were 101.33 µm (day 4), 124 µm (day 5), 159 µm (day 6), 187 µm (day 8), 202 µm (day 10), and 212 µm (day 12). The artificial WSL was visually demonstrated in grades 1 and 2 of the ERK system. CONCLUSIONS: The depths of the lesions increased as the duration increased from day 4 to day 12, indicating that the lesion depths increased with the more prolonged exposure to the acetate buffer solution.

Real-time structural characterization of protein response to a caged compound by fast detector readout and high-brilliance synchrotron radiation.

Protein dynamics are essential to biological function, and methods to determine such structural rearrangements constitute a frontier in structural biology. Synchrotron radiation can track real-time protein dynamics, but accessibility to dedicated high-flux single X-ray pulse time-resolved beamlines is scarce and protein targets amendable to such characterization are limited. These limitations can be alleviated by triggering the reaction by laser-induced activation of a caged compound and probing the structural dynamics by fast-readout detectors. In this work, we established time-resolved X-ray solution scattering (TR-XSS) at the CoSAXS beamline at the MAX IV Laboratory synchrotron. Laser-induced activation of caged ATP initiated phosphoryl transfer in the adenylate kinase (AdK) enzyme, and the reaction was monitored up to 50 ms with a 2-ms temporal resolution achieved by the detector readout. The time-resolved structural signal of the protein showed minimal radiation damage effects and excellent agreement to data collected by a single X-ray pulse approach.