Analysis of posture and balance impairments in individuals with chronic nonspecific neck pain-an observational study.

Background: Neck pain is one of the most burdensome chronic musculoskeletal problems globally. Impaired proprioception is associated with Chronic Nonspecific neck pain as the structures of the cervical spine are crucial for proprioception and balance. There is a paucity of literature examining objective measures of balance and postural sway in patients with Nonspecific neck pain. Methods: This study was observational and consisted of 126 samples (63 cases and 63 controls who were recruited using convenience sampling. The demographics of the samples were collected and the postural and balance impairment was assessed using Biodex Balance SD. Mean, Median, and SD were obtained and the inferential analysis was done using the Whitney U Test and the level of significance was accepted at p < 0.05. Results: The subjects with neck pain showed had a lower static stability index, static sway index, static stability index- forward backward and static sway index lateral scores than the normal counterparts. There are significant differences in the overall static stability index, (p < 0.001). There was a significant difference in static sway index(p = 0.003), and static stability index lateral (p = 0.004). There was no significant difference for static sway index forward and backward (p = 0.550) and lateral sway index (p = 0.711). Conclusion: Subjects with neck pain showed had a lower static stability index, static sway index, static stability index- forward backward and static sway index lateral scores than the normal counterparts and there was a significant difference between the static sway and static stability index in forward and backward directions as well as in lateral direction. These findings may help to assess the specific balance parameters and address the underlying causes of balance issues in patients with neck pain and also provide a comprehensive care to the patients. Clinical Trial Registration: The trial was registered with CTRI India with registration number: CTRI/2022/07/044222.

Effect of Roasting on the Chemical Composition and Oxidative Stability of Tomato (Solanum lycopersicum L.) Seed Oil.

In this study, tomato seed (TS) samples were subjected to different roasting conditions (90-170 °C and 10-30 min) to compare their effects on the chemical composition and oxidative stability of tomato seed oil (TSO). Unroasted TS was considered as a control sample. Our results revealed that moderate roasting (130 °C/20 min) can significantly increase the content of linoleic acid (54.01-54.89%), linolenic acid (2.17-2.41%), phytosterols (2789.56-3037.31 mg/kg), squalene (5.06-13.10 mg/kg), total phenols (22.37-22.67 mg GAE/100 g), and other functional components (p < 0.05) in TSO, while the antioxidant activity (via DPPH, ABTS, and FRAP assays) also increased. In addition, the tocopherol content decreased significantly (758.53-729.50 mg/kg). Accelerated oxidation experiments showed that roasting (170 °C/30 min) increased the oxidative stability index (OSI) of TSO from 5.35 to 7.07 h (p < 0.05). Furthermore, roasting gradually increased the content of 5-hydroxymethylfurfural (HMF) (0-1.74 mg/kg), which indicates that the oxidative stability and the degree of the Maillard reaction increased upon roasting. Principal component analysis (PCA) and hierarchical cluster analysis (HCA) showed that moderate roasting (130 °C/20 min) improved the chemical composition, antioxidant activity, and oxidative stability of TSO. Furthermore, this work provides a useful theoretical basis for the processing and wide application of TSO in the pharmaceutical and food industries.

Deciphering genotype-by-environment interaction of grass pea genotypes under rain-fed conditions and emphasizing the role of monthly rainfall.

Rainfed regions have inconsistent spatial and temporal rainfall. So, these regions could face water deficiency during critical stages of crop growth. In this regard, multi-environment trials could play a key role in introducing stable genotypes with good performance across several rainfed regions. Grass pea, as a potential forage crop, is a resilient plant that could grow in unsuitable circumstances. In this study, agro-morphological attributes of 16 grass pea genotypes were examined in four semi-warm rain-fed regions during the years 2018-2021. The MLM analysis of variance showed a significant genotype-by-environment interaction (GEI) for dry yield, seed yield, days to maturity, days to flowering, and plant height of grass pea. The PLS (partial least squares) regression revealed that rainfall in the grass pea establishment stage (October and November) is meaningful. For grass pea cultivation, monthly rainfall during plant growth is important, especially in May, with an aim for seed yield. Regarding dry yield, G5, G10, G11, G12, G13, and G15 were selected as good performers and stable genotypes using DY × WAASB biplots, while SY × WAASB biplot manifested G2, G3, G12, and G13 as superior genotypes with stable seed yield. Considering equal weights for yield as well as the WAASB stability index (50/50), G13 was selected as the best one. Among test environments, E2 and E11 played a prominent role in distinguishing the above genotypes from other ones. In this study, MTSI (multi-trait stability index) analysis was applied to select a stable genotype, considering all measured agro-morphological traits simultaneously. Henceforth, the G5 and G15 grass pea genotypes were discerningly chosen due to their commendable performance in the WAASBY plot. In this context, G13 did not emerge as the winner based on MTSI; however, it exhibited an MTSI value in close proximity to the outer boundary of the circle. Consequently, upon comprehensive consideration of all traits, it is deduced that G5, G13, and G15 can be appraised as promising superior genotypes with stability across diverse environmental conditions.

Characterizing Longitudinal Alterations in Postural Control Following Lower Limb Injury in Professional Rugby Union Players.

Assessment of player's postural control following a lower limb injury is of interest to sports medicine practitioners due to its fundamental role in daily tasks and sporting activities. The aim was to longitudinally monitor professional rugby union players' postural control during each phase of the rehabilitation program (acute, middle, and late) following a lower limb injury. Seven male rugby union players (height 1.80 [0.02] m; mass 100.3 [11.4] kg; age 24 [4] y) sustained a time loss, noncontact lower limb injury. Static postural control was assessed via sway path (in meters), and dynamic postural control was assessed via vertical postural stability index. Group differences (P < .05) were reported across the acute, middle, and late phase. Smaller magnitudes of sway path were observed for eyes-open sway path, and for the middle and late phase smaller magnitudes of vertical postural stability index (P < .05) at the end session compared with first session. Whereas larger magnitudes of vertical postural stability index were found between baseline and the last session (P < .05). Large interindividual and intraindividual variation was apparent across the 3 phases of rehabilitation. Postural control improvements were identified during rehabilitation. However, postural control did not return to baseline, with altered kinetics throughout each rehabilitation phase.

Development of unique soil organic carbon stability index under influence of integrated nutrient management in four major soil orders of India.

Stability of soil organic carbon (SOC) is pre-requisite for stabilization of C leading to long-term C sequestration. However, development of a comprehensive metric of SOC stability is a major challenge. The objectives for the study were to develop novel SOC stability indices by encompassing physical, chemical, and biochemical SOC stability parameters and identifying the most important indicators from a Mollisol, an Inceptisol, a Vertisol, and an Alfisol under long-term manuring and fertilization. The treatments were control, 100%NPK, 50% NPK+ 50% N through either farmyard manure, cereal residue, or green manure. SOC stability indicators were selected, transformed and integrated into unique SOC stability indices via conceptual framework and principal component analysis. Principal component analysis identified Al-macroaggregate, humic acid C-microaggregate, microaggregate-C, particulate organic matter-C-macroaggregate and polyphenol-microaggregate as the important SOC stability indicators. The principal component analysis -based SOC stability index varied from 0.2 to 0.9, 0.1 to 0.5, 0.2 to 0.6, 0.1 to 0.5 for Mollisol, Inceptisol, Vertisol and Alfisol, respectively. The SOC-stability index derived from conceptual framework and principal component analysis significantly lined up well with one another, although NaOCl-Res-C showed a high correlation with both conceptual framework (r = 0.8) and principal component analysis-based (r = 0.7) SOC stability indexes, suggesting that both methods might be used to quickly assess SOC stability in four soil orders. Overall, 50%NPK+50%N by farmyard manure or green manure emerged as the most effective management practices for enhancing stability of SOC in Mollisol, Inceptisol, Vertisol, and Alfisol of India which might act as major C sink in rice-wheat and maize-wheat cropping systems. The other aspect of C sequestration is to enhance agricultural productivity without depending much on expensive chemical fertilizers. The model yardstick thus developed for assessing SOC stability might be useful to other systems as well.

Comparison of Functional Outcomes after Anterior Cruciate Ligament Reconstruction with Meniscal Repair for Unstable versus Stable Meniscal Tears.

This study aimed to compare functional outcomes including knee muscle strength in the quadriceps and hamstrings, and proprioception, assessed through dynamic postural stability (overall stability index [OSI]) and self-reported outcomes in the operated and non-operated knees between anterior cruciate ligament reconstruction (ACLR) with meniscal repair for unstable (root and radial tears) and stable (longitudinal, horizontal, and bucket handle tears) meniscal tears. A total of 76 patients were randomly selected (41 with ACLR with meniscal repair for unstable meniscal tears and 35 with ACLR with meniscal repair for stable meniscal tears) at three different time points (preoperative, 6 months, and 12 months). Repeated measures analysis of variance was used to investigate the differences in outcomes for between-subject and within-subject factors. In the operated knees, there were no significant differences for functional outcomes between the two groups (all p > 0.05). In the non-operated knees, a significant difference was observed for the OSI between the two groups, which was significantly higher in ACLR with meniscal repair for unstable meniscal tears than for stable meniscal tears at 6 months (p < 0.001). Multiple linear regression analysis showed that age (p = 0.027), preoperative OSI in the operated knees (p = 0.005), and postoperative OSI in the operated knees at 6 months (p = 0.002) were significant and independent predictors for OSI in the non-operated knees at 6 months postoperatively. Therefore, while no differences were observed in functional outcomes between the two groups in the operated knees, dynamic postural stability was poorer at 6 months postoperatively in the non-operated knees of patients with ACLR with meniscal repair for unstable meniscal tears. Furthermore, a significant correlation was observed between preoperative/postoperative dynamic postural stability in the operated knees and postoperative dynamic postural stability in the non-operated knees. Hence, we recommend incorporating balance exercises for both knees in post-surgical rehabilitation, particularly for patients with unstable meniscal tears.

Evaluation of the scaling and corrosive potential of the cooling water supply system of a nuclear power plant based on the physicochemical control dataset.

The data of physicochemical control for the cooling water supply system of the Rivne Nuclear Power Plant (Ukraine), where water samples were monitored three times a day during 2022-2023. The pH, temperature, total dissolved salts, total hardness and total alkalinity were measured using standard methods. The differences in ϕ and ψ, Langelier saturation index (LSI) and Ryznar stability index (RSI), which characterise scaling and corrosive potential, were calculated The calculated values are ϕ - ψ: 0.29 (± 0.62), LSI: 1.51 (± 0.39), and RSI 5.74 (± 0.69). According to the scaling and corrosive classification, the water is characterised as susceptible to scale formation. Moreover, to the Pearson correlation coefficient (ρ), there is a very strong relationship ρ = -0.9635 between LSI and RSI, a weak relationship ρ = -0.2370 between ϕ - ψ and RSI, and ρ = -0.2997 between ϕ - ψ and LSI.

The influence of jump-landing direction on dynamic postural stability following anterior cruciate ligament reconstruction.

BACKGROUND: Traditional testing prior to return to sport following anterior cruciate ligament reconstruction typically involves jump-landing tasks in the forward direction. As injury is most likely the result of multiplanar neuromuscular control deficits, assessment of dynamic postural stability using landing tasks that require multiplanar stabilization may be more appropriate. The purpose of this study was to examine how dynamic postural stability is affected when performing jump-landing tasks in three different directions. METHODS: Fifteen athletes [11 females (18.0 ± 3.0 years) and 4 males (18.5 ± 3.1 years)] following anterior cruciate ligament reconstruction performed a series of single-limb jump-landing tasks in 3 directions. Individual directional stability indices and a composite dynamic postural stability index were calculated using ground reaction force data and were compared using separate one-way repeated measures ANOVAs. FINDINGS: All directional stability indices demonstrated a significant main effect for jump-landing direction (medial-lateral P < 0.001, η2p = 0.95; anterior-posterior P < 0.001, η2p = 0.97; vertical P = 0.021, η2p = 0.24). The diagonal jump-landing direction produced increased medial-lateral stability and vertical stability scores, while the forward and diagonal jump-landing directions produced increased anterior-posterior stability scores. There was no significant effect for the composite dynamic stability index score. INTERPRETATION: Jump-landing direction affects dynamic postural stability in all 3 planes of movement in athletes following anterior cruciate ligament reconstruction. Results indicate the potential need to incorporate multiple jump-landing directions to better assess dynamic postural stability prior to return to sport.

Kinetic study of thermal degradation of flaxseed oil and moringa oil blends with physico-chemical, oxidative stability index (OSI) and shelf-life prediction.

The thermal degradation kinetics of flaxseed oil (FSO) and moringa oil (MO) blends with soyabean oil (SOY; 80%), rice bran oil (RBO; 80%), cotton seed oil (CSO; 80%) and sunflower oil (SFO; 80%) with Rancimat equipment. There was no significant (p ≤ 0.05) difference observed in the specific gravity (SG), density (D), and refractive index (RI) values of the MO and FSO blends, while the rancidity parameters showed the opposite variations. The FTIR spectra showed absorption bands at 966 cm-1, 1097 cm-1, 1160 cm-1, 1217 cm-1, 1377 cm-1, 1464 cm-1, 1743 cm-1, 2945 cm-1, 2852 cm-1 and 3008 cm-1. Oil blends' kinetic degradation (Ea, ΔH, ΔS, A) is represented by the semilogarithmic relationship between the oxidative stability index (OSI) and temperature. The activation energy (Ea) ranged from 77.1 ± 0.21 to 106.9 ± 0.03 kJ/mol and 73.2 ± 0.01 to 104.4 ± 0.02 kJ/mol for flaxseed oil (FSO) and moringa oil (MO) blends, respectively. The enthalpy (ΔH) and entropy (ΔS) ranged from 67.3 to 121.6 kJ/mol, and - 60.2 to - 8.4 J/mol, and 63.55 to 95.59 kJ/mol and - 20.66 to - 4.11 J/mol for FSO blends and MO blends, respectively.

Dissecting the resilience of barley genotypes under multiple adverse environmental conditions.

As climate change increases abiotic stresses like drought and heat, evaluating barley performance under such conditions is critical for maintaining productivity. To assess how barley performs under normal conditions, drought, and heat stress, 29 different varieties were examined, considering agronomic, physiological, and disease-related characteristics. The research was conducted in five environments: two normal environments in 2020/2021 and 2021/2022, two drought stress environments in 2020/2021 and 2021/2022, and one heat stress environment in 2021/2022. The results demonstrated that genotype and environment significantly influenced all traits (p < 0.05), except canopy temperature, while genotype x environment interaction significantly influenced most traits, except total chlorophyll content and canopy temperature. Heat and drought stress environments often resulted in reduced performance for traits like plant height, spike length, grains per spike, and 100-grain weight compared to normal conditions. Based on individual traits, genotypes 07UT-44, 06WA-77, 08AB-09, and 07N6-57 exhibited the highest grain yield (4.1, 3.6, 3.6, and 3.6 t/ha, respectively). Also, these genotypes demonstrated enhanced stability in diverse drought and heat stress conditions, as assessed by the mean performance vs. stability index (Weighted Average of Absolute Scores, WAASB). The multi-trait stability index (MTSI) identified 07UT-44, 07UT-55, 07UT-71, and 08AB-09 as the most stable genotypes in terms of the performance of all traits. The imported lines demonstrated superior performance and stability, highlighting their potential as valuable genetic resources for developing climate-resilient barley.

Fabrication and characterization of pectin-zein nanoparticles containing tanshinone using anti-solvent precipitation method.

Tanshinone compounds are secondary metabolites which their application in food and pharmaceutical industry is limited due to the low solubility in water and sensitivity to heat. This study aimed to develop a novel biopolymer nanocarriers system based on pectin/zein for the encapsulation of tanshinone compounds using the anti-solvent precipitation method. The concentration of pectin and mass ratio of tanshinone/zein in the final formulation of nanoparticles were optimized. According to the results, a pectin concentration of 1 g/L and a tanshinone/zein ratio of 0.1:1 g/g were considered the optimal nanoparticle formulation. The resulting nanoparticles exhibited a spherical core-shell structure, with approximate values for size, zeta potential, TSI, and encapsulation efficiency of 132 ± 0.002 nm, -38.6 ± 0.019 mV, 0.600 ± 0.084, and 79.41 ± 0.62 %, respectively. The FTIR test confirmed the presence of hydrophobic, hydrogen, and electrostatic interactions among the constituents within the nanoparticles. Additionally, XRD and DSC tests verified the amorphous nature of the nanoparticles. Morphological examination conducted through TEM, and SEM revealed the characteristics of the resulting nanoparticles. Furthermore, this carrier system significantly enhanced the solubility of tanshinone compounds in water.

Elevated atmospheric CO2 concentration mitigates salt damages to safflower: Evidence from physiological and biochemical examinations.

The physiological and biochemical responses of salt-stressed safflower to elevated CO2 remain inadequately known. This study investigated the interactive effects of high CO2 concentration (700 ± 50 vs. 400 ± 50 µmol mol-1) and salinity stress levels (0.4, 6, and 12 dS m-1, NaCl) on growth and physiological properties of four safflower (Carthamus tinctorius L.) genotypes, under open chamber conditions. Results showed that the effects of CO2 on biomass of shoot and grains depend on salt stress and plant genotype. Elevated CO2 conditions increased shoot dry weight under moderate salinity stress and decreased it under severe stress. The increased CO2 concentration also increased the safflower genotypes' relative water content and their K+/Na + concentrations. Also enriched CO2 increased total carotenoid levels in safflower genotypes and improved membrane stability index by reducing H2O2 levels. In addition, increased CO2 level led to an increase in seed oil content, under both saline and non-saline conditions. This effect was particularly pronounced under severe saline conditions. Under conditions of high CO2 and salinity, the Koseh genotype exhibited higher grain weight and seed oil content than other genotypes. This advantage is due to the higher relative water content, maximum quantum efficiency of photosystem II (Fv/Fm), and K+/Na+, as well as the lower Na+ and H2O2 concentrations. Results indicate that the high CO2 level mitigated the destructive effect of salinity on safflower growth by reducing Na + uptake and increasing the Fv/Fm, total soluble carbohydrates, and membrane stability index. This finding can be used in safflower breeding programs to develop cultivars that can thrive in arid regions with changing climatic conditions.

Prolonged exposure to freezing stress reduces the ability of chickpea seedlings to effectively tolerate extremely low temperatures.

The duration and intensity of freezing stress are the most critical factors determining injury in autumn chickpeas, limiting their production and development. To evaluate the effects of freezing temperature and duration on the survival rate (SU%), as well as the physiological and biochemical characteristics of autumn chickpea seedlings, a study was conducted using five different temperatures (0, -6, -8, -10, and -12°C) and five different durations (1 h, 2 h, 3 h, 4 h, and 5 h) of exposure to freezing stress. The SU% of chickpea seedlings decreased to zero after exposure to temperatures of -10°C and -12°C for 5 hours. As the temperature decreased from -8°C to -12°C and the duration of exposure to freezing stress increased from 1 to 5 hours, the leaf membrane stability index decreased by 33%, 48%, 46%, 57%, and 58%, respectively. The highest and lowest total pigment contents were observed after 1 hour at 0°C and 5 hours at -12°C, respectively. The maximum photochemical efficiency of photosystem II (Fv'/Fm') was not affected by temperatures as low as -8°C in any of the time treatments during the recovery period. However, this parameter's value decreased as the freezing stress duration increased. At -12°C, the activity of ascorbate peroxidase, catalase, and peroxidase increased by 44.6%, 38.3%, and 33.0%, respectively, as the duration of stress was increased from 1 hour to 5 hours. A positive and significant correlation was observed between plant dry weight, membrane stability index, photosynthetic pigment content, and Fv'/Fm' with SU% after exposure to freezing stress. The minimum temperature and the maximum duration of freezing stress tolerance in chickpea seedlings were observed at -12°C for two hours. Our findings confirm that prolonging the freezing duration disrupts the defense mechanisms of chickpea seedlings. Therefore, future studies on breeding chickpeas tolerant to freezing stress should concentrate on attributes strongly correlated with SU%.

Optimizing the allocation of renewable DGs, DSTATCOM, and BESS to mitigate the impact of electric vehicle charging stations on radial distribution systems.

The increasing global adoption of Electric Vehicles (EVs) necessitates a greater supply of electricity for charging these cars. The popularity of EVs is also driven by their minimal maintenance requirements, enhanced performance, and eco-friendly nature. However, the expanding usage of EVs poses challenges to the distribution system's efficiency, thereby impacting its reliability. Consequently, ensuring the precise placement of electric vehicle charging stations (EVCS) becomes crucial for maintaining a dependable infrastructure. Solar and wind-based Renewable Distributed Generations (RDGs), Distribution STATic COMPensator (DSTATCOM), and Battery Energy Storage System (BESS) have become an important part of a Radial Distribution System (RDS) for mitigating the impact of EVCS as environmental sensitivity has grown and technology has advanced. Improper placement and sizing of components in can significantly impact the performance of a RDS. This research proposes a unique approach utilizing the Slime Mould Algorithm (SMA) and other optimization algorithms to identify the optimum positioning and sizing of RDG/DSTATCOM/EVCS/BESS within the RDS. The presented approach's efficacy is showcased by employing it on two commonly used IEEE RDSs: specifically, the 33-bus and 69-bus systems. The main objective of this research is to address actual power loss in these systems, subsequently enhancing voltage stability and bus voltage profiles. Findings from the test cases demonstrate that optimizing with the SMA algorithm produces more precise results in mitigating real power loss, enhancing bus voltage levels, and improving overall system stability when compared to existing algorithms.

Effects of environmental stability and phycoperiphyton structure on the macroinvertebrate community of regulated Andean rivers / Efectos de la estabilidad ambiental y estructura del ficoperifiton en la comunidad de macroinvertebrados en ríos andinos regulados

Introduction: The variability in the structure of aquatic communities is frequently attributed to environmental changes; however, in stable environments such as regulated rivers, trophic interactions could be another key environmental factor determining the structure of these communities. These alterations could cause a greater growth of algae, and in turn, changes in the functional groups and in the composition of the macroinvertebrate community favoring the dominance of certain groups of organisms. Objective: To identify the effects of environmental variations and changes in the structure of the phycoperiphyton on the macroinvertebrate community of regulated Andean rivers. Methods: We analyzed environmental and biological data collected in quarterly samples carried out between 2010 and 2018 in two rivers of the Central Andes (Antioquia - Colombia), for a total of 27 samples. Sample collections used standardized methods. Different statistical models were used to establish spatial and temporal patterns of the environmental variables, of the abundance and/or density and diversity of phycoperiphyton and macroinvertebrates, as well as the trophic relationships that exists between them. Results: We found that regulated rivers present relatively little environmental variability. The environmental parameters with the greatest variation were temperature, turbidity, and orthophosphates; these last two were the abiotic variables with the greatest contribution to benthic instability. Conclusion: The presence of scraping and foraging macroinvertebrates was more affected by the stability of the phycoperiphyton density than by environmental variables, showing the importance of trophic interactions in regulated rivers and the bottom up control in these ecosystems.

Introducción: La variabilidad en la estructura de las comunidades acuáticas se atribuye frecuentemente a cambios ambientales, no obstante, en ambientes estables como ríos regulados, las interacciones tróficas podrían ser otro factor ambiental clave determinante de la estructura de estas comunidades. Estas alteraciones podrían provocar un mayor crecimiento de algas y, a su vez, cambios en los grupos funcionales y en la composición de la comunidad de macroinvertebrados favoreciendo la dominancia de determinados grupos de organismos. Objetivo: Identificar el efecto de los cambios ambientales y de la estructura del ficoperifiton sobre la comunidad de macroinvertebrados de ríos Andinos regulados. Métodos: Se analizaron datos ambientales y biológicos recolectados en muestreos trimestrales realizados entre 2010 y 2018 en dos ríos de los Andes Centrales (Antioquia - Colombia), para un total de 27 muestras. La recolección de muestras empleó métodos estandarizados. Se utilizaron diferentes modelos estadísticos para establecer patrones espaciales y temporales de las variables ambientales, de la abundancia y/o densidad y diversidad de ficoperifiton y de los macroinvertebrados, así como las relaciones tróficas que existen entre ellos. Resultados: Se encontró que los ríos regulados presentan relativamente poca variabilidad ambiental. Los parámetros ambientales con mayor variación fueron: temperatura, turbidez y ortofosfatos; las dos últimas variables abióticas fueron las que más aportaron a la inestabilidad bentónica. Conclusión: La presencia de macroinvertebrados raspadores y recolectores fue más afectada por la estabilidad de la densidad del ficoperifiton que por las variables ambientales, evidenciando la importancia de las interacciones tróficas en ríos regulados y el control bottoom up en estos ecosistemas.

Genotype-by-Environment Interaction Analysis for Quantity and Quality Traits in Faba Beans Using AMMI, GGE Models, and Stability Indices.

Faba beans are considered one of the most important crops for animal feed. The genotype × environment interaction (GEI) has a considerable effect on faba bean seed production. The objectives of this study included assessing multiple locations and genotypes to understand how various ecosystems and faba bean genotypes relate to one another, and suggesting the ideal climatic conditions, crop management system, and genotypes so that they are carefully chosen for their stability. A 2-year experiment was conducted in order to define the stability across four environments based on stability indices for certain characteristics: moisture (%), ash content (%), crude protein content (%), crude fat (%), total starch (%), and crude fiber content (%). Statistically significant differences indicated that GEIs were present. The heritability was generally high for qualitative traits in comparison with quantitative traits. The crude protein content, plant height, and thousand-seed weight were all positively correlated with the seed yield; however, the other qualitative variables were adversely correlated. The crude protein content of the cultivar Tanagra displayed a high stability index, followed by Ste1. Under conventional management, Tanagra demonstrated high values for the seed yield in Giannitsa and Florina. Ste1 and Ste2 are particularly promising genetic materials that showed high values under low-input conditions. The best genotypes to use and the most favorable environments/types of cultivation were the Tanagra cultivar, followed by the Ste2 genotype, according to the additive main effects and multiplicative interaction (AMMI) and genotype plus genotype-by-environment (GGE) biplot models. Earliness showed significant heritability values and very high stability indices, again indicating qualitative behavior according to genetic parameters. With the exception of the number of pods per plant, which demonstrated low heritability while having excellent index values, traits like seed yield showed relatively low-stability-based heritability values. Global efforts aimed at improving the genetics of faba beans might benefit from genotypes that exhibit consistent yields in various conditions.

Genotype × environment interaction and stability analysis for seed yield and yield components in sesame (Sesamum indicum L.) in Benin Republic using AMMI, GGE biplot and MTSI.

Increasing production requires the development of high yielding cultivars adapted to various environments. Multi-environment trials (MET) remains the best approach to assess the performance of accessions across environments. The objective of this study was to select the best performing and stable accessions of sesame across different environments in Benin Republic. Nineteen sesame accessions were evaluated across eight environments using a randomized complete block design with four replicates. The accessions were evaluated for three traits: days to 50% flowering (D50F), thousand-seed weight (TSW), and seed yield (SY) during 2020 growing season. The stable and top-performing accessions across environments were determined using AMMI (Additive main effects and multiplicative interaction), GGE (Genotype main effect and genotype × environment interaction), and MTSI (Multi-trait stability index). AMMI analysis of variance showed a significant difference across environments for the three traits. The accessions were affected by environmental conditions for the three traits. The broad-sense heritability estimates were high (>0.60) for all the traits, indicating the improvement is achievable through selection. AMMI1 and AMMI2 biplots identified G10 and G13 as high seed yielding accessions adapted to environments E1, E2. The GGE biplot showed two mega-environments for TSW and three mega-environments for D50F and SY. For SY, G11 and G13 were the best accessions in the first mega-environment, G10 the best accession in the second mega-environment; G3 and G8 were the best accessions in the third mega-environment. AMMI and GGE analyses identified G10, G5, G12 as high seed yielding and stable accessions across environments. GGE biplot revealed that E1 and E2 were the most suitable environments for multi-location trials based on their discriminating ability and representativeness. MTSI indicated G10, G13, G19 as promising germplasm to be recommended for breeding program.

Genotype-by-environment interactions (GEIs) and evaluate superior sweet potato (Ipomoea batatas [L.] Lam) using combined analysis and GGE biplot.

Genetic studies on yield and yield quality are becoming benchmarks for farmers and industry in selecting and developing varieties. Evaluations that combine various stability statistics can provide more accurate information to select the ideal genotype. This study aims to identify the effect of genotype by environment interactions (GEIs) for yield and yield quality, to select high yield and stable sweet potato genotypes, as well as to select superior genotypes based on yield and yield quality. Three different environments in West Java, Indonesia, were used to test the sweet potato genotypes using a randomized block design that was repeated three times. Highly significant effects of sweet potato genotypes (G), environments (E), and GEIs were observed for yield and yield quality. The Combined ANOVA showed that GEIs effect contributed 54.88% for yield, 40.01% for sweetness, 10.46% for moisture content, 68.80% for tuber diameter, and 72.57% for tuber length from the sum of square. Five most high and stable yield on sweet potato genotypes identified by all measures, includes G4, G6, G7, G31, and G32. Genotype by yield*traits (GYT) selected seven genotypes that have superior in yield and yield quality, they were G7, G15, G4, G20, G6, G31, and G14. Based on stability measurements and GYT biplots, the genotypes G4, G6, G7, and G31 are in both slices. So that the four genotypes have high, stable yields, and have a good combination of traits for yield quality. Our findings can be used for improvement cultivation involving partner companies, partner institutions, and farmers, and the selected genotypes can be release as superior varieties candidate.

Effect of Extraction Methods on the Physicochemical Properties, Chemical Composition, and Antioxidant Activities of Samara Oil.

Samara oil (Elaeagnus mollis Diels kernel oil) exhibits diverse healthy functions; however, the effect of extraction on its quality is still unclear. The present study was undertaken to evaluate the effect of extraction methods (solvent extraction: ethyl acetate, acetone, n-hexane, and petroleum ether; mechanical extraction: hot-pressing and cold-pressing) on the color, acid value, peroxide value, fatty acid composition, bioactive compounds, antioxidant activities, and oxidative stability index of samara oil obtained from Elaeagnus mollis Diels kernels. The results indicated that extraction methods affected the physicochemical properties, chemical composition, and antioxidant activities of samara oil except for fatty acid composition and γ-tocopherol. The highest values of bioactive compounds including polyphenols (140.27 mg gallic acid equivalent (GAE)/kg) and carotenoids (42.95 mg/kg) were found in samara oil extracted with acetone. The values of 2,2-diphenyl-1-picrylhydrazyl (DPPH) and 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) diammonium salt (ABTS) assays, as well as oxidative stability index (OSI), were the highest in this oil. Correlation analysis results demonstrated that DPPH, ABTS, and OSI of samara oil were positively correlated with polyphenols and carotenoids. After evaluation, acetone could be used to extract samara oil. The study provides new information on the samara oil process.

A pilot study: Comparing a novel noninvasive measure of cerebrovascular stability index with an invasive measure of cerebral autoregulation in neonates with congenital heart disease.

Infants with congenital heart disease (CHD) may have impaired cerebral autoregulation (CA) associated with cerebral fractional tissue oxygen extraction (FTOE). We conducted a pilot study in nine CHD neonates to validate a noninvasive CA measure, cerebrovascular stability index (CSI), by eliciting responses to postural tilts. We compared CSI to an invasive measure of CA and to FTOE collected during tilts (FTOESpot). FTOESpot correlated with CSI, as did the change in FTOE during tilts, but CSI's correlation with impaired CA did not reach significance. Larger trials are indicated to validate CSI, allowing for noninvasive CA measurements and measurements in outpatient settings.