Preformed Stainless-Steel Crowns: Their Effects on Oral Hygiene Maintenance and Gingival Health - A Prospective Original Research.

The stainless-steel crown (SSC) is a durable restoration and has several indications for use in primary teeth such as following a pulpotomy/pulpectomy, fractured teeth, teeth with developmental defects, or large multi-surface caries lesions where amalgam is likely to fail. Due to its durability and a lifespan like the primary tooth, it could well be the gold standard in restorative care. SSCs protect the crown from fracture, reduce the possibility for leakage, and ensure a biological seal. However, the placement of the SSC should follow a meticulous technique. There are some clinical situations where the SSC may fail, leading to plaque accumulation and gingivitis. This could be secondary to improper crimping of crown margins, which lead to poorly adapted SSC. In some clinical situations, ledge formation under the crown or failure to clean excess cement can contact the gingiva and cause gingival inflammation. This study was carried out on 41 children between the ages of 4 and 10 in Al Qassim region to study the effects of SSCs on gingiva and oral hygiene. The study also aims to establish the correlation between SSC adaptation and post-insertion inflammation. The plaque and gingival index were recorded at 3 months' post SSC insertion. Clinical examination was undertaken, and gingival index (Loe and Silness 1967) and plaque index (Silness and Loe 1967) were used to record gingival health and plaque accumulation, respectively. The result for post-inflammation and SSC adaptation showed that there was no statistically significant difference in post-insertion inflammation and crown adaptation (P value = 0.216). The result for pre-operative inflammation and post-operative inflammation shows that there is no significant difference in post-inflammation and adaptation (P value = 0.47). We found that oral hygiene care had a heightening effect and oral hygiene maintenance plays a key role in preventing gingival inflammation irrespective of the SSC adaptation over short periods of time (3 months).

Potential factors affecting the success rate of indirect pulp therapy in primary molars with deep caries: a retrospective study.

Indirect pulp therapy (IPT) is a common conservative treatment for deep dental caries. However, the potential risk factors for the prognosis of IPT have not been well studied. This study retrospectively investigated the success rate of IPT in treating primary molars with deep caries and the factors potentially affecting the two-year success rate. A total of 303 primary molars in 202 children (106 boys and 96 girls) were included in this study. These primary molars were identified as having deep caries by clinical and radiographic examinations and were treated with IPT. The factors potentially affecting the IPT success rate were analyzed after two years of follow-up. The results indicated that the two-year IPT success rate was 86% (262/303). The success rate of primary molars with and without stainless steel crowns was 96% (120/125) and 80% (142/178), respectively. Primary molars treated with stainless steel crowns showed a significantly lower risk of failure (hazard ratio (HR) = 0.18, 95% confidence interval (CI): (0.10, 0.34), p = 0.01). There were no significant differences in other factors, including gender (male vs. female), age (preschool vs. school age), cooperation level (Frankl 2 vs. 3 or 4 scales), arch type (maxillary vs. mandibular), tooth type (first vs. second primary molar), or pulp capping material (calcium hydroxide vs. glass ionomer cement). IPT is an effective, conservative treatment modality for primary molars with deep caries. Stainless steel crowns could significantly improve the IPT success rate.

Comparison of three-dimensional printed resin crowns and preformed stainless steel crowns for primary molar restorations: a randomized controlled trial.

The importance of aesthetics in children has increased over time. Therefore, this multicenter randomized clinical trial aimed to analyze and compare three-dimensional (3D)-printed resin crowns (RCs) as a potential alternative to stainless-steel crowns (SSCs) for restoring primary molars with extensive carious lesions. According to the null hypothesis, no statistically significant difference was observed in restoration failure between RC and SSC groups. A total of 56 primary molars after pulp treatment at two dental hospitals were included. After pulp treatment, the teeth were randomly divided into two groups: SSCs (n = 28) and RCs (n = 28). At 1 week and 3, 6 and 12 months, the Quigley-Hein plaque index (QHI), gingival index (GI), occlusal wear, and survival rate were assessed by examination, radiography and alginate impressions. No significant difference in QHI was observed between the two groups. However, the GI at 12 months and occlusal wear in the RC group were significantly higher than those in the SSC group (p < 0.05). The survival rates were 100% in the SSC group and 82.1% in the RC group (p = 0.047). Cracks and discoloration were also observed in the RCs. Within the limitations of this study, 3D-printed RCs are aesthetically superior to SSCs and clinically easy to repair. However, if clinical effectiveness and safety are improved, RCs could potentially become a viable aesthetic alternative in the future.

The stress distribution of a primary molar tooth restored with stainless steel crown using different luting cements.

BACKGROUND: The aim of this study is to evaluate the stress distributions of a primary molar tooth restored with a stainless steel crown (SSC) using resin and glass ionomer luting cements by Finite Element Analysis (FEA). METHODS: Original DICOM data of a primary molar was used to create a 3D model. One model was prepared as a tooth model with SSC. A 30 µm cement layer was used in model. Two different luting cements were tested in the study: self-cure adhesive resin cement, and glass ionomer cement. Vertical and oblique loads of 330 N were applied to simulate maximum bite force and lateral forces in the occlusal contact areas of the models. Maximum von Mises stress values in the models were evaluated as MPa. RESULTS: The maximum von Mises stress value was observed in the force application and general occlusal contact areas for all models. The maximum von Mises stress values were higher in the tooth model with SSC using self-cure adhesive resin cement (478.09 MPa and 214.62 MPa) than in the tooth model with SSC using glass ionomer cement (220.06 MPa and 198.72 MPa) in both vertical and oblique loading, respectively. CONCLUSIONS: Depending on the magnitude of the bite force on the SSC, fracture of the luting cement materials could occur if the stress exceeds the endurance limit of the luting cement. Cementation with glass ionomer cement may help to reduce stress levels in SSC restorations of primary molars in children.

Association between dental restorations and artefacts on head magnetic resonance images in paediatric patients.

BACKGROUND: Magnetic resonance imaging (MRI) has become an important diagnostic tool for paediatric patients. The association between dental restorations and MRI artefacts/distortions, however, is unclear. AIM: To investigate the association between dental restorations and artefacts in head MRI in children. DESIGN: This retrospective analysis included patients who underwent head MRI and dental examination at Ramathibodi Hospital from January 2015 to March 2021. From dental records and dental radiographs, a dentist reviewed the amount and type of restorative materials used. Two radiologists examined the MRI scans in five sequences for the presence of distortions and quantified the magnitude and grading of any artefacts. RESULTS: Ninety-four patients aged 3-15 years were included. Twenty-four patients who received preformed metal crowns (PMCs) had MRI distortions. Subjects with no restorations or with tooth-coloured material or amalgam restorations or both did not exhibit distortions. The number of PMCs was related to the size of an artefact. Almost all distortions were confined to the oral cavity and maxillary sinus and did not affect the diagnostic brain area. CONCLUSION: Among the commonly used dental restorative materials for children, only PMCs were associated with artefacts on head MRI scans.

Evaluation of Microleakage of Stainless Steel Crowns and Pedo Jacket Crowns after Cementation With Different Luting Cements.

Aim: The present research was conducted to assess the microleakage of stainless steel crowns along with pedo jacket crowns following cementation with different luting cements. Materials and Methods: A total of 60 deciduous teeth subjected to extraction were employed in this in vitro research. These 60 specimens were randomly divided into two groups: Group I: Stainless steel crowns and Group II: Pedo Jacket crowns. Both crowns were subjected to cementation using self-cure resin-modified glass ionomer (RMGI) cement as well as by means of self-adhesive universal resin cement (RelyX luting cement). The specimens were subjected to storage in distilled water at 37°C for 24 h and were subjected to 500 thermal cycles between 5°C and 55°C using a dwell span of 30 s. Individual surfaces were assessed for the amount of dye infiltration at the boundaries by the side of the tooth-cement border beneath a stereomicroscope under 50× magnifying power. At the mesial and distal surfaces, the amount of microleakage was measured in micrometers (µm), and the mean value was computed for each sample. Results: Stainless steel crowns subject to cementation with RelyX luting cement exhibited the lowest microleakage (0.88 ± 0.78) versus self-cure RMGI cement (0.94 ± 0.78). There was no statistically significant difference found between the groups. Pedo Jacket crowns subject to cementation with RelyX luting cement exhibited the lowest microleakage (0.96. ± 0.32) while self-cure RMGI cement (1.83 ± 0.16) depicted the maximum microleakage. There was an extremely statistically noteworthy dissimilarity noted among the groups. Conclusion: The current research concluded that Pedo Jacket crowns subjected to cementation with RelyX luting cement can be regarded as an esthetically pleasing restorative alternative for numerous young patients. Applying RelyX luting cement to Pedo Jacket crowns provides a strong bolstering by composite materials that ensures the success of the therapy provided.

Comparative Evaluation of Preformed Stainless Steel Crown's Crazing at Different Autoclave Cycles.

Aim: The study aimed to assess and compare the crazing of preformed stainless steel (SS) crowns at various autoclave cycles. Materials and methods: Around 15 SS crowns were subjected to zero (unsterilized), one, three, five, and seven autoclave cycles at 121°C, 15 psi for 20 minutes. After each autoclave cycle, the mesial surface of each crown from occlusal to cervical portions was examined under a 40× stereomicroscope. Crazing was evaluated using Wickersham's criteria. Results: One autoclave cycle does not produce any cracks, whereas the higher the number of autoclave cycles, the higher the cracks, which affects the prognosis of the SS crown treatment. Conclusion: Surface alterations of SS crowns after different autoclave cycles were significant. So, preformed SS crowns should be discarded after sterilizing once or twice during clinical practice. How to cite this article: Sowkarthicaa P, Mathian VM, Gawthaman M, et al. Comparative Evaluation of Preformed Stainless Steel Crown's Crazing at Different Autoclave Cycles. Int J Clin Pediatr Dent 2023;16(S-1):S77-S80.

Comparative Evaluation of Chlorhexidine Polymer Scaffold, 3Mixtatin, and Formocresol for Vital Primary Pulp Therapy: A Randomized 6-month Clinical Study.

Introduction: The study was performed to evaluate and compare the clinical and radiographic efficacy of chlorhexidine (CHX) polymer scaffold, 3Mixtatin, and formocresol for vital primary pulp therapy-a randomized clinical study. Materials and methods: A total of 120 primary molars were included from children aged between 6 and 8 years in this randomized clinical study based on inclusion and exclusion criteria and were randomly allocated into three groups (group I-CHX polymer scaffold, group II-3Mixtatin, and group III-formocresol. Pulpotomy was performed in a vital cariously exposed primary tooth with healthy periodontium where their retention is more beneficial than extraction. Subjects were followed up at 1, 3, and 6 months for clinical and radiographic evaluations. Results: At 6 months of follow-up, the overall success rate of pulpotomy in groups I, II, and III was 56.41, 71.05, and 60.52% in each group, respectively. Nonsignificant difference (p > 0.05) was seen during intergroup comparison. Conclusion: However, among the three materials used in this study, 3mixtatin comparatively had better results. How to cite this article: Goel N. Comparative Evaluation of Chlorhexidine Polymer Scaffold, 3Mixtatin, and Formocresol for Vital Primary Pulp Therapy: A Randomized 6-month Clinical Study. Int J Clin Pediatr Dent 2023;16(3):478-482.

Comparison of the morphology of the primary first molars and the forms of stainless steel crowns used in clinical practice.

This study aimed to assess the difference in the mesiodistal (MD) and buccolingual (BL) dimensions of primary first molars between Taiwanese boys and girls using a three-dimensional (3D) scanner (Microscribe G2 digitizer), record the coordinates in the 3D systems of Graph-R Project and reconstruct 3D images for subsequent analysis. We also determined whether the differences in these parameters between primary first molars and stainless steel crowns (SSC, 3M ESPE, No. 2-7) could be used as a reference for selecting a suitably-sized SSC and performing adjustments during restoration. The results indicated a statistically significant difference in the mesiodistal distance of lower primary first molar crowns between boys (7.75 ± 0.38 mm) and girls (7.41 ± 0.41 mm) (p < 0.05) but no differences in the mesiodistal distance of upper primary first molars between the two sexes. The mean mesiodistal distances of the upper and lower primary first molars of boys were close to SSC size 4 and 3, respectively, while those of girls were close to size 3 in both arches. Overall, the buccolingual distance between the first maxillary and mandibular molars of Taiwanese children was greater than the buccolingual distance between the 3M ESPE SSC. Reducing the buccolingual length of the abutment teeth might quickly help achieve a better fit, reduce chair time, and minimize patient discomfort. In addition, trimming the mesial and distal metal margins of SSCs might help reduce microleakage from the crown margins and improve its retention and survival rate. In conclusion, the 3D scanning and analysis method used in this study can serve as a reference for fabricating SSC to achieve better crown adaptation and improve dental procedures.

Finite Element Analysis of the Mechanical Performance of Non-Restorable Crownless Primary Molars Restored with Intracoronal Core-Supported Crowns: A Proposed Treatment Alternative to Extraction for Severe Early Childhood Caries.

Early childhood caries (ECC) involve extensive coronal tooth structure loss, and tooth reconstruction remains highly challenging. To fulfill preclinical assessment, the present study investigated the biomechanics of non-restorable crownless primary molars that were restored by stainless steel crowns (SSC) using different composite core build-up materials. Computer-aided design-integrated 3D finite element and modified Goodman fatigue analyses were performed to determine stress distribution, risk of failure, fatigue life and dentine-material interfacial strength for the restored crownless primary molars. A dual-cured resin composite (MultiCore Flow), a light-cured bulk-fill resin composite (Filtek Bulk Fill posterior), a resin-modified glass-ionomer cement (Fuji II LC) and a nano-filled resin-modified glass-ionomer cement (NRMGIC; Ketac N100) were used as core build-up composite materials in the simulated models. The finite element analysis showed that types of core build-up materials affected the maximum von Mises stress only in the core materials (p-value = 0.0339). NRMGIC demonstrated the lowest von Mises stresses and revealed the highest minimum safety factor. The weakest sites were along the central grooves regardless of type of material, and the ratio of shear bond strength to maximum shear stress at the core-dentine interface of the NRMGIC group was lowest among the tested composite cores. However, all groups provided lifetime longevity from the fatigue analysis. In conclusion, core build-up materials differentially influenced the von Mises stress (magnitude and distribution) and the safety factor in crownless primary molars restored with core-supported SSC. However, all materials and the remaining dentine of crownless primary molars provided lifetime longevity. The reconstruction by core-supported SSC, as an alternative to tooth extraction, may successfully restore non-restorable crownless primary molars without unfavorable failures throughout their lifespan. Further clinical studies are required to evaluate the clinical performance and suitability of this proposed method.

Comparison of periodontal health of primary teeth restored with zirconia and stainless steel crowns: A systemic review and meta-analysis.

BACKGROUND/PURPOSE: In children, the use of stainless steel crowns to treat caries has a high success rate. However, due to the unnatural color of stainless steel crowns, it still needs to modify crown types. The present meta-analysis study aims to explore the previous articles on the comparison of stainless steel crowns and zirconia crowns. METHODS: The systematic search of studies on the comparison of zirconia crowns and stainless steel crowns for primary teeth was mainly in PubMed and Cochrane database. The standardized mean differences (SMDs) of gingival health between zirconia crowns and stainless steel crowns comprised the primary outcome, and the SMDs of plaque index compared two crown treatments was treated as the secondary outcome. RESULTS: The meta-analysis extracted 187 papers from various databases and collected five randomized controlled trials, four comparisons on deciduous molars and one comparison on deciduous incisors. 160 children were included, ranging in age from 3-9 years old. The quantitative analysis showed a significantly lower gingival index of zirconia crowns in the primary molar group and the primary incisor group. The plaque index between two crown treatments groups was -4.51, indicating less accumulation of plaque on zirconia crown. However, the heterogeneity of included trials still need to be considered. CONCLUSION: Zirconia crowns for deciduous teeth had its advantages for gingival health. Although stainless steel crowns were more likely to have plaque deposition and gingival inflammation, zirconia crowns relatively caused the opposite tooth wearing and chipping. Therefore, the comprehensive consideration is important to choose deciduous tooth crown.

Clinical and Radiographical Outcomes of Restorative Treatment With Stainless Steel Crowns Performed by Undergraduate Dental Students in Medina, the Kingdom of Saudi Arabia.

Background and objective Stainless steel crown (SSC) placement has long been the preferred restorative treatment modality for treating multi-surface carious primary molars. This study aimed to assess the outcomes of SSC placement on primary molars performed by undergraduate dental students. Materials and methods A total of 112 children aged four to eight years were contacted for follow-ups 12 months after they underwent SSC restorations by fifth- or sixth-year female dental students in 2018-2020. Clinical and radiographic examinations were performed by trained dentists to evaluate for signs of failure. Descriptive statistics were applied for categorical variables and a Chi-squared test was used to assess the relationship between failure rate and demographic variables (i.e., age, gender, and type of tooth). Results The majority of the included children were aged seven years, with females (52.7%) slightly outnumbering males (47.3%). The failure rate clinically was 17.8%, involving one or more of the following signs: pain (16.1%), poor crown adaptation (16.1%), improper marginal seal (13.4%), fistula (6.3%), and mobility (4.5%). The rate of failure as per radiological examinations was 15%, involving one or more of the following signs: furcation involvement (9.8%), periapical radiolucency (3.6%), and pathological root resorption (1.8%). No significant association was found between failure rate and age, gender, or type of tooth. Conclusions The restorative treatment of primary molars with SSCs exhibited a high success rate when performed by less experienced undergraduate dental students from different academic levels. The failure rate did not appear to be associated with the child's age and gender or the type of tooth.

Treatments Performed on First Permanent Molars in a Sample of Lebanese Children: A Five-Year Retrospective Analysis.

Background: Dental caries remains one of the most prevalent worldwide chronic diseases and an expensive burden to healthcare services despite significant preventative measures Objective: Dental caries is a multifactorial chronic disease that occurs in early childhood and persists until adulthood. The first permanent molars (FPMs) are the earliest permanent molars to erupt what makes them vulnerable to caries among children and adolescents. Objective: The aim of this study is to determine the prevalence of different types of treatments performed on FPMs in 7-10-year-old Lebanese patients. Methods: In this retrospective study, a convenience sample obtained from the dental electronic health record system of 753 patients, aged between 7 and 10 years old who attended the department of Pediatric Dentistry at the Faculty of Dental Medicine-Lebanese University, between 2015 and 2019 was assessed. Preventive procedures (fissure sealants and preventive resin restorations) as well as therapeutic ones (apexogenesis, composite restoration, extraction, pulp capping, radicular treatment, pulpotomy, stainless steel crown, surgery and emergency) were investigated. Data collected was statistically analyzed using SPSS version 25.0 (Armonk, NY: IBM Corp). Results: The 753 patients were divided into 364 girls (48.3%) and 389 boys (51.7%). These patients underwent a total of 2145 procedures. Procedures were equally divided between therapeutic procedures and preventive ones (51.6% versus 48.4%, respectively). The most commonly performed procedure was composite restoration (41.9%), followed by fissure sealant (34.5%) and preventive resin restorations (14%). Treatments corresponded to a similar sex distribution with slightly higher male patients (53.6%). No statistical association was found between sex and procedure type (p=0.7). Conclusion: In the present study, therapeutic treatments prevalence is relatively high. Thus, educating the parents and teachers on the importance of FPMs would reflect in increased preventive treatments at the expense of decreased therapeutic ones.

Determination of proper band size for stainless steel crowns of primary second molars: A cross-sectional study.

BACKGROUND AND OBJECTIVES: Fixed space maintainers are often used following primary tooth loss. In this process, selection of a proper band size for stainless steel crowns (SSCs) is often performed by trial and error, which increases the chairside time and risk of contamination of the tried bands with saliva, blood, and gingival crevicular fluid, necessitating their subsequent sterilization. This study is aimed at determining the proper size of prefabricated bands for all SSCs of primary second molars. MATERIALS AND METHODS: In this cross-sectional study, seven examiners, including three orthodontists and four pediatric dentists attempted to select the proper band size for 24 primary second molar SSCs (3M). They selected the proper band size for each size of SSC six times in three sessions. The significance of all selected choices was carried out using the test of proportions. RESULTS: The most commonly selected bands for EU2, EU3, EU4, EU5, EU6, and EU7 SSCs were sizes 31+, 32+, 34, 35+, 37, and 38, respectively, and the proper bands for EL2, EL3, EL4, EL5, EL6, and EL7 SSCs were sizes 30, 31+, 32+, 33+, 35 and 36+, respectively. The difference in the frequency ratio of different choices for all sizes of SSCs was significant (P < 0.05). CONCLUSION: The current study determined the proper band size for all SSCs of primary maxillary and mandibular second molars. This information can help dental clinicians in selecting the proper band size for SSCs without trial and error.

Effects of pH and Time on Nickel Ion Release from Pediatric Stainless-Steel Crowns: An In-Vitro Comparative Study.

Background: Frequent use of stainless-steel crowns in pediatric dentistry has led to concerns that heavy metals in the crowns could be released into the mouth and potentially trigger allergic reactions. Of these constituents, nickel is known to be a common cause of hypersensitivity reactions. Aim: To evaluate and compare nickel ion release from pediatric stainless-steel crowns of 3M ESPE and DNTO Kids Crown at pH levels of 4.3, 5.5, and 6.3 for days 1, 7, 15, and 30. Methods: In this in-vitro study, nickel ion release (in PPM) from stainless steel crowns of 3M ESPE (n = 60) and DNTO Kids Crown (n = 60) in artificial saliva of pH 4.3, 5.5, and 6.3 on days 1, 7, 15, and 30 was analyzed using inductively coupled plasma-atomic emission spectrometry at Indian Institute of Technology-Bombay. Statistical analysis was performed using two-way and three-way analysis of variance (ANOVA) followed by least significant difference post hoc test and Spearman's rank order correlation. P < 0.05 was considered statistically significant. Results: In both groups (3M ESPE and DNTO Kids Crown), a significantly higher amount of nickel ion release was observed at pH 4.3. Among different time intervals, significantly maximum nickel ion release was observed on day 7. Nickel ion release from DNTO Kids Crowns was significantly higher than 3M ESPE at all the pH levels and time intervals. Conclusions: The pH of artificial saliva and nickel ion release is inversely related. The manufacturing process may affect the biodegradability of stainless-steel crowns. The maximum average nickel ion release from stainless steel crowns is below the recommended dietary intake but sufficient to cause allergic reactions.

Effect of Stainless-Steel Crown and Preformed Zirconia Crown on the Periodontal Health of Endodontically Treated Primary Molars Correlating with IL-1ß: An In Vivo Study.

OBJECTIVE: The purpose of this study was to evaluate the effect of different crown materials on the interleukinone beta (IL-1ß) content of the gingival crevicular fluid and to study which crown material causes the highest inflammation on the marginal gingiva on a biochemical basis in pediatric patients. STUDY DESIGN: Twenty patients in the age group of 4-8 years with endodontically treated primary molars indicated for crown placement were selected for the study which was further divided into 3 groups for sample consideration: group 1-stainless steel crown, group 2-preformed zirconia crown, and group 3- control group (primary second molar). All assay procedures were carried out and the results of the collected samples were calculated using the ELISA-AID TM technique. RESULTS: On mean comparison among the groups using ANOVA oneway test, P-value turns out to be highly significant, on mean comparison using Tukey's HSD post-hoc test, The p-value was 0.000 ,0.000 ,0.193 on comparing group 1 with group 2, group 1 with group 3, group 2 with group 3 respectively. CONCLUSION: Preformed zirconia crown can be a relative replacement of SSC in primary molars as it causes comparatively less inflammation and with an advantage of esthetics.

Comparison of Three Treatment Techniques for Deep Carious Lesions in Primary Teeth: An In Vivo Study.

Aims: To evaluate and compare three different treatment modalities in the management of deep carious lesions in primary molars. Material and methods: A total of 60 primary molars from patients aged 4-9 years were randomly divided into three groups with 20 samples each. Sample in Group I received indirect pulp therapy with Mineral Trioxide Aggregate [MTA] as lining material, Group II received the modified Hall technique, and Group III MTA pulpotomy. The patients were evaluated at 1, 3, 6, and 9 months as per evaluation criteria for success or failure of the same. A Chi-square test was used for proportions and for comparison between groups. Results: Clinically, the success rate for the modified Hall technique and MTA pulpotomy was higher than indirect pulp therapy. Radiographically, the modified Hall technique had the highest success rate of 100 percent among the indirect pulp therapy and MTA pulpotomy. This success rate was however not statistically significant. Conclusion: All three techniques had promising results clinically and radiographically. Since the results were not statistically significant, conservative treatment like Modified Hall's technique can be preferred over the surgical approach [MTA Pulpotomy]. Clinical significance: This study compares newer techniques called Hall's technique with traditional techniques like indirect pulp capping and MTA pulpotomy. Hall's technique is a quick and noninvasive procedure, which involves fitting the crown and seating it over the tooth without any caries removal/ tooth preparation and no local anesthesia is being practiced. In the present study Hall's technique showed higher rates of success compared to the other two procedures. How to cite this article: Poludasu M, Kumar Mallela GM, Puppala R, et al. Comparison of Three Treatment Techniques for Deep Carious Lesions in Primary Teeth: An In Vivo Study. Int J Clin Pediatr Dent 2022;15(S-2):S201-S206.

Ferric sulfate pulpotomy in primary teeth with different base materials: a 2-year randomized controlled trial.

OBJECTIVE: To evaluate the effects of zinc oxide-eugenol, calcium hydroxide, and mineral trioxide aggregate as base materials on the clinical and radiographic success of ferric sulfate pulpotomies in primary molars. METHOD AND MATERIALS: Following hemostasis with 15.5% ferric sulfate, 105 teeth were randomly allocated to three groups: Group 1, zinc oxide-eugenol; Group 2, calcium hydroxide; and Group 3, mineral trioxide aggregate. All teeth were restored with stainless-steel crowns. Clinical and radiographic examinations were conducted at 6, 12, 18, and 24 months. RESULTS: After 24 months, clinical success rates for Groups 1 to 3 were 97.1% (34/35 teeth), 94.2% (33/35 teeth), and 97.1% (34/35 teeth), respectively (P > .05). Radiographic success rates were 65.7% (23/35 teeth), 65.7% (23/35 teeth), and 77.1% (27/35 teeth), respectively (P > .05). Internal resorption was the most observed radiographic finding (15/105 teeth). CONCLUSIONS: The choice of zinc oxide-eugenol, calcium hydroxide, and mineral trioxide aggregate, as base materials, did not affect the clinical and radiographic success of ferric sulfate pulpotomies in primary teeth.

Is zirconium or stainless steel the most suitable crown material for less dentin stress in endodontically treated teeth?

BACKGROUND: Stainless steel crowns (SSCs), which have been used frequently in the treatment of first permanent molars in children until now, has become less applicable due to its poor aesthetic appearance. Zirconia crowns (ZCs) have become more popular due to their aesthetic advantage. However, stress transmission of ZCs to dental tissues under occlusal forces in endodontically treated teeth has not been described. OBJECTIVE: The aim of this study was to compare the stress distribution of different crown materials (ZCS, SSCs) and adhesive materials on dentin in endodontically treated permanent teeth and to specify the crown-adhesive model with lower stress. METHODS: Finite element analysis (FEA) was used to apply a force of 300 N from the inner part of the buccal tubercles (vertical loading) and a lingo-buccal at an angle of 30 degrees (oblique loading) of the first permanent molars (FPM) with different crown (ZCS, SSCs) and adhesive (Glass ionomer cement, Resin modified glass ionomer cement, Resin cement) materials in twelve separate models. The von Mises values obtained from the models were compared and the optimal stress values were determined by FEA. RESULTS: The lowest stress values of dentin were found in zirconia crown model with glass ionomer cement (GIC) adhesive under vertical loading (26,793 Mpa). In the zircon crown and GIC adhesive model, less von Mises stress occurred on the dentin under all conditions. CONCLUSIONS: ZCs and GIC adhesive may be recommended for teeth with a high probability of dentin fracture.

Reliability of Educational Content Videos in YouTubeTM about Stainless Steel Crowns.

The purpose of the present study is to evaluate the quality and educational information provided on YouTubeTM about stainless steel crowns (SSC). Videos were searched for on YouTube TM using keywords related to stainless steel crowns in pediatric dentistry in the Google Trends application. A total of 52 videos were available. After exclusion criteria application, 22 videos were selected for the study for analysis. To classify the video content as high or low quality, a scoring system formed of seven parameters was used. For a global evaluation of the video quality, the video information and quality index were applied. Data obtained were analyzed statistically. Only a few videos explained the importance of SSCs. Most of the videos uploaded with a high number of likes were of low quality. Very few videos were of high quality. The content quality and educational quality of videos is poor and incomplete. None of the videos explained the need for the SSC and its benefits in pediatric dentistry.