Benzoxazinoids Biosynthetic Gene Cluster Identification and Expression Analysis in Maize under Biotic and Abiotic Stresses.

Benzoxazinoids (BXs) are unique bioactive metabolites with protective and allelopathic properties in maize in response to diverse stresses. The production of BXs involves the fine regulations of BXs biosynthetic gene cluster (BGC). However, little is known about whether and how the expression pattern of BGC members is impacted by biotic and abiotic stresses. Here, maize BGC was systemically investigated and 26 BGC gene members were identified on seven chromosomes, for which Bin 4.00-4.01/4.03-4.04/7.02 were the most enriched regions. All BX proteins were clearly divided into three classes and seven subclasses, and ten conserved motifs were further identified among these proteins. These proteins were localized in the subcellular compartments of chloroplast, endoplasmic reticulum, or cytoplasmic, where their catalytic activities were specifically executed. Three independent RNA-sequencing (RNA-Seq) analyses revealed that the expression profiles of the majority of BGC gene members were distinctly affected by multiple treatments, including light spectral quality, low-temperature, 24-epibrassinolide induction, and Asian corn borer infestation. Thirteen differentially expressed genes (DEGs) with high and specific expression levels were commonly detected among three RNA-Seq, as core conserved BGC members for regulating BXs biosynthesis under multiple abiotic/biotic stimulates. Moreover, the quantitative real-time PCR (qRT-PCR) verified that six core conserved genes in BGC were significantly differentially expressed in leaves of seedlings upon four treatments, which caused significant increases in 2,4-dihydroxy-7-methoxy-1,4-benzoxazin-3-one (DIMBOA) content under darkness and wound treatments, whereas a clear decrease in DIMBOA content was observed under low-temperature treatment. In conclusion, the changes in BX metabolites in maize were regulated by BGC gene members in multiple stress presences. Therefore, the identification of key genes associated with BX accumulation under biotic/abiotic stresses will provide valuable gene resources for breeding maize varieties with enhanced capability to adapt to environmental stresses.

Genome-Wide Identification, Evolution, and Expression Analysis of the DIR Gene Family in Schima superba.

Schima superba, commonly known as the Chinese guger tree, is highly adaptable and tolerant of poor soil conditions. It is one of the primary species forming the evergreen broad-leaved forests in southern China. Dirigent proteins (DIRs) play crucial roles in the synthesis of plant lignin and lignans, secondary metabolism, and response to adversity stress. However, research on the DIR gene family in S. superba is currently limited. This study identified 24 SsDIR genes, categorizing them into three subfamilies. These genes are unevenly distributed across 13 chromosomes, with 83% being intronless. Collinearity analysis indicated that tandem duplication played a more significant role in the expansion of the gene family compared to segmental duplication. Additionally, we analyzed the expression patterns of SsDIRs in different tissues of S. superba. The SsDIR genes exhibited distinct expression patterns across various tissues, with most being specifically expressed in the roots. Further screening identified SsDIR genes that may regulate drought stress, with many showing differential expression under drought stress conditions. In the promoter regions of SsDIRs, various cis-regulatory elements involved in developmental regulation, hormone response, and stress response were identified, which may be closely related to their diverse regulatory functions. This study will contribute to the further functional identification of SsDIR genes, providing insights into the biosynthetic pathways of lignin and lignans and the mechanisms of plant stress resistance.

Photosynthetic Performance and Yield Losses of Winter Rapeseed (Brassica napus L. var. napus) Caused by Simulated Hail.

Winter oilseed rape (Brassica napus L.), Europe's foremost oilseed crop, is significantly impacted by hailstorms, leading to substantial yield reductions that are difficult to predict and measure using conventional methods. This research aimed to assess the effectiveness of photosynthetic efficiency analysis for predicting yield loss in winter rapeseed subjected to hail exposure. The aim was to pinpoint the chlorophyll fluorescence parameters most affected by hail stress and identify those that could act as non-invasive biomarkers of yield loss. The study was conducted in partially controlled conditions (greenhouse). Stress was induced in the plants by firing plastic balls with a 6 mm diameter at them using a pneumatic device, which launched the projectiles at speeds of several tens of meters per second. Measurements of both continuous-excitation and pulse-modulated-amplitude chlorophyll fluorescence were engaged to highlight the sensitivity of the induction curve and related parameters to hail stress. Our research uncovered that some parameters such as Fs, Fm', ΦPSII, ETR, Fo, Fv/Fm, and Fv/Fo measured eight days after the application of stress had a strong correlation with final yield, thus laying the groundwork for the creation of new practical protocols in agriculture and the insurance industry to accurately forecast damage to rapeseed crops due to hail stress.

Genome-Wide Identification of the Alfin-like Gene Family in Cotton (Gossypium hirsutum) and the GhAL19 Gene Negatively Regulated Drought and Salt Tolerance.

Alfin-like (AL) is a small plant-specific gene family characterized by a PHD-finger-like structural domain at the C-terminus and a DUF3594 structural domain at the N-terminus, and these genes play prominent roles in plant development and abiotic stress response. In this study, we conducted genome-wide identification and analyzed the AL protein family in Gossypium hirsutum cv. NDM8 to assess their response to various abiotic stresses for the first time. A total of 26 AL genes were identified in NDM8 and classified into four groups based on a phylogenetic tree. Moreover, cis-acting element analysis revealed that multiple phytohormone response and abiotic stress response elements were highly prevalent in AL gene promoters. Further, we discovered that the GhAL19 gene could negatively regulate drought and salt stresses via physiological and biochemical changes, gene expression, and the VIGS assay. The study found there was a significant increase in POD and SOD activity, as well as a significant change in MDA in VIGS-NaCl and VIGS-PEG plants. Transcriptome analysis demonstrated that the expression levels of the ABA biosynthesis gene (GhNCED1), signaling genes (GhABI1, GhABI2, and GhABI5), responsive genes (GhCOR47, GhRD22, and GhERFs), and the stress-related marker gene GhLEA14 were regulated in VIGS lines under drought and NaCl treatment. In summary, GhAL19 as an AL TF may negatively regulate tolerance to drought and salt by regulating the antioxidant capacity and ABA-mediated pathway.

Comprehensive analysis of Alfin-like transcription factors associated with drought and salt stresses in wheat (Triticum aestivum L.).

BACKGROUND: Alfin-like proteins are a kind of plant-specific transcription factors, and play vital roles in plant growth, development and stress responses. RESULTS: In this study, a total of 27 Alfin-like transcription factors were identified in wheat. TaAL genes were unevenly distributed on chromosome. Phylogenetic analysis showed TaAL genes were divided into AL-B and AL-C subfamilies, and TaALs with closer evolutionary relationships generally shared more similar exon-intron structures and conserved motifs. The cis-acting element analysis showed MBS, ABRE and CGTCA-motif were the most common in TaAL promoters. The interacting proteins and downstream target genes of TaAL genes were also investigated in wheat. The transcriptome data and real-time PCR results indicated TaAL genes were differentially expressed under drought and salt stresses, and TaAL1-B was significantly up-regulated in response to drought stress. In addition, association analysis revealed that TaAL1-B-Hap-I allelic variation had significantly higher survival rate compared to TaAL1-B-Hap-II under drought stress. CONCLUSIONS: These results will provide vital information to increase our understanding of the Alfin-like gene family in wheat, and help us in breeding better wheat varieties in the future.

Genome-wide analysis of wheat xyloglucan endotransglucosylase/hydrolase (XTH) gene family revealed TaXTH17 involved in abiotic stress responses.

BACKGROUND: Environmental stresses, including high salinity and drought, severely diminish wheat yield and quality globally. The xyloglucan endotransglucosylase/hydrolase (XTH) family represents a class of cell wall-modifying enzymes and plays important roles in plants growth, development and stress adaptation. However, systematic analyses of XTH family genes and their functions under salt and drought stresses have not been undertaken in wheat. RESULTS: In this study, we identified a total of 135 XTH genes in wheat, which were clustered into three evolutionary groups. These TaXTHs were unevenly distributed on 21 chromosomes of wheat with a majority of TaXTHs located on homelogous groups 2, 3 and 7. Gene duplication analysis revealed that segmental and tandem duplication were the main reasons for the expansion of XTH family in wheat. Interaction network predictions indicated that TaXTHs could interact with multiple proteins, including three kinases, one methyltransferase and one gibberellin-regulated protein. The promoters of the TaXTH genes harbored various cis-acting elements related to stress and hormone responses. RNA-seq data analyses showed that some TaXTH genes were induced by salt and drought stresses. Furthermore, we verified that TaXTH17 was induced by abiotic stresses and phytohormone treatments, and demonstrated that TaXTH17 was localized in the secretory pathway and cell wall. Functional analyses conducted in heterologous expression systems and in wheat established that TaXTH17 plays a negative role in plant resistance to salt and drought. CONCLUSIONS: We identified 135 XTH genes in wheat and conducted comprehensive analyses of their phylogenetic relationships, gene structures, conserved motifs, gene duplication events, chromosome locations, interaction networks, cis-acting elements and gene expression patterns. Furthermore, we provided solid evidence supporting the notion that TaXTH17 plays a negative role in plant resistance to salt and drought stresses. Collectively, our results provide valuable insights into understanding wheat XTHs, particularly their involvement in plant stress responses, and establish a foundation for further functional and mechanistic studies of TaXTHs.

Arrangement into layers and mechanobiology of multi-cell co-culture models of the uterine wall.

STUDY QUESTION: Can a co-culture of three cell types mimic the in vivo layers of the uterine wall? SUMMARY ANSWER: Three protocols tested for co-culture of endometrial epithelial cells (EEC), endometrial stromal cells (ESC), and myometrial smooth muscle cells (MSMC) led to formation of the distinct layers that are characteristic of the structure of the uterine wall in vivo. WHAT IS KNOWN ALREADY: We previously showed that a layer-by-layer co-culture of EEC and MSMC responded to peristaltic wall shear stresses (WSS) by increasing the polymerization of F-actin in both layers. Other studies showed that WSS induced significant cellular alterations in epithelial and endothelial cells. STUDY DESIGN, SIZE, DURATION: Human EEC and ESC cell lines and primary MSMC were co-cultured on a collagen-coated synthetic membrane in custom-designed wells. The co-culture model, created by seeding a mixture of all cells at once, was exposed to steady WSS of 0.5 dyne/cm2 for 10 and 30 min. PARTICIPANTS/MATERIALS, SETTING, METHODS: The co-culture of the three different cells was seeded either layer-by-layer or as a mixture of all cells at once. Validation of the models was by specific immunofluorescence staining and confocal microscopy. Alterations of the cytoskeletal F-actin in response to WSS were analyzed from the 2-dimensional confocal images through the Z-stacks following a previously published algorithm. MAIN RESULTS AND THE ROLE OF CHANCE: We generated three multi-cell in vitro models of the uterine wall with distinct layers of EEC, ESC, and MSMC that mimic the in vivo morphology. Exposure of the mixed seeding model to WSS induced increased polymerization of F-actin in all the three layers relative to the unexposed controls. Moreover, the increased polymerization of F-actin was higher (P-value < 0.05) when the length of exposure was increased from 10 to 30 min. Furthermore, the inner layers of ESC and MSMC, which are not in direct contact with the applied shearing fluid, also increased their F-actin polymerization. LARGE SCALE DATA: N/A. LIMITATIONS, RESONS FOR CAUTION: The mixed seeding co-culture model was exposed to steady WSS of one magnitude, whereas the uterus is a dynamic organ with intra-uterine peristaltic fluid motions that vary in vivo with different time-dependent magnitude. Further in vitro studies may explore the response to peristaltic WSS or other physical and/or hormonal perturbations that may mimic the spectrum of pathophysiological aspects. WIDER IMPLICATIONS OF THE FINDINGS: Numerous in vitro models were developed in order to mimic the human endometrium and endometrium-myometrium interface (EMI) region. The present co-culture models seem to be the first constructed from EEC, ESC, and MSMC on a collagen-coated synthetic membrane. These multi-cell in vitro models better represent the complex in vivo anatomy of the EMI region. The mixed seeding multi-cell in vitro model may easily be implemented in controlled studies of uterine function in reproduction and the pathogenesis of diseases. STUDY FINDING/COMPETING INTEREST(S): This study was supported in part by Tel Aviv University funds. All authors declare no conflict of interest.

Phospholipid Signaling in Crop Plants: A Field to Explore.

In plant models such as Arabidopsis thaliana, phosphatidic acid (PA), a key molecule of lipid signaling, was shown not only to be involved in stress responses, but also in plant development and nutrition. In this article, we highlight lipid signaling existing in crop species. Based on open access databases, we update the list of sequences encoding phospholipases D, phosphoinositide-dependent phospholipases C, and diacylglycerol-kinases, enzymes that lead to the production of PA. We show that structural features of these enzymes from model plants are conserved in equivalent proteins from selected crop species. We then present an in-depth discussion of the structural characteristics of these proteins before focusing on PA binding proteins. For the purpose of this article, we consider RESPIRATORY BURST OXIDASE HOMOLOGUEs (RBOHs), the most documented PA target proteins. Finally, we present pioneering experiments that show, by different approaches such as monitoring of gene expression, use of pharmacological agents, ectopic over-expression of genes, and the creation of silenced mutants, that lipid signaling plays major roles in crop species. Finally, we present major open questions that require attention since we have only a perception of the peak of the iceberg when it comes to the exciting field of phospholipid signaling in plants.

The Impact of Salinity in the Irrigation of a Wild Underutilized Leafy Vegetable, Sonchus oleraceus L.

Introducing non- or under-utilized crops to cultivation generates benefits such as biodiversity enrichment, supporting mitigation actions towards climate change-induced effects. The salinization of soil and water supplies is progressively disrupting natural habitats and food production, especially in regions such as the Mediterranean. Sonchus oleraceus L. is a Mediterranean wild leafy green with nutritional and medicinal properties. This study's purpose was to determine whether salinity affects the growth, quality, and nutrient composition of Sonchus oleraceus L. In an unheated plastic greenhouse, seedlings were transplanted in pots filled with perlite and irrigated with a nutrient solution with no NaCl added (the control, C) or with the addition of 40, 60, 80, and 100 mM of NaCl (treatments S4, S6, S8, and S10, respectively). The leaf and root growth, leaf quality, and the nutrient composition of leaves and roots were determined. Regarding the results, growth was mainly affected at high salinity levels (S8 and S10), with no observed effects of salinity on the determined quality parameters. The nutrient composition was variably affected by salinity in leaves but not in roots (except in the case of Na and the K/Na ratio). Sonchus oleraceus L. showed a general relative tolerance in moderate salinity levels (40 and 60 mM of NaCl), suggesting potential commercial exploitation of the species in areas where the quality of irrigation water is low. However, the health effects of consuming this species grown under salinity stress need to be studied in future research.

A Numerical Model to Predict the Relaxation Phenomena in Thermoset Polymers and Their Effects on Residual Stress during Curing, Part II: Numerical Evaluation of Residual Stress.

This article proposes a numerical routine to predict the residual stresses developing in an epoxy component during its curing. The scaling of viscoelastic properties with the temperature and the degree of conversion is modeled, adopting a mathematical formulation that considers the concurrent effects of curing and structural relaxation on the epoxy's viscoelastic relaxation time. The procedure comprises two moduli: at first, the thermal-kinetical problem is solved using the thermal module of Ansys and a homemade routine written in APDL, then the results in terms of temperature and the degree of conversion profiles are used to evaluate the viscoelastic functions, and the structural problem is solved in the mechanical module of Ansys, allowing the residual stresses calculation. The results show that the residual stresses mainly arise during cooling and scale with the logarithm of the Biot number.

Enigmatic role of auxin response factors in plant growth and stress tolerance.

Abiotic and biotic stresses globally constrain plant growth and impede the optimization of crop productivity. The phytohormone auxin is involved in nearly every aspect of plant development. Auxin acts as a chemical messenger that influences gene expression through a short nuclear pathway, mediated by a family of specific DNA-binding transcription factors known as Auxin Response Factors (ARFs). ARFs thus act as effectors of auxin response and translate chemical signals into the regulation of auxin responsive genes. Since the initial discovery of the first ARF in Arabidopsis, advancements in genetics, biochemistry, genomics, and structural biology have facilitated the development of models elucidating ARF action and their contributions to generating specific auxin responses. Yet, significant gaps persist in our understanding of ARF transcription factors despite these endeavors. Unraveling the functional roles of ARFs in regulating stress response, alongside elucidating their genetic and molecular mechanisms, is still in its nascent phase. Here, we review recent research outcomes on ARFs, detailing their involvement in regulating leaf, flower, and root organogenesis and development, as well as stress responses and their corresponding regulatory mechanisms: including gene expression patterns, functional characterization, transcriptional, post-transcriptional and post- translational regulation across diverse stress conditions. Furthermore, we delineate unresolved questions and forthcoming challenges in ARF research.

Response and adaptation mechanisms of Apostichopus japonicus to single and combined anthropogenic stresses of polystyrene microplastics or cadmium.

Microplastics (MPs) have become pervasive in marine ecosystems, exerting detrimental effects on marine life. The concurrent presence and interaction of MPs and heavy metals in aquatic environments could engender more insidious toxicological impacts. This study aimed to elucidate the potential impacts and underlying mechanisms of polystyrene microplastics (PS-MPs), cadmium (Cd), and their combined stress (MPs-Cd) on sea cucumbers (Apostichopus japonicus). It focused on the growth, Cd bioaccumulation, oxidative stress responses, immunoenzymatic activities, and metabolic profiles, specifically considering PS-MPs sizes preferentially ingested by these organisms. The high-dose MPs (MH) treatment group exhibited an increase in cadmium bioavailability within the sea cucumbers. Exposure to PS-MPs or Cd triggered the activation of antioxidant defenses and immune responses. PS-MPs and Cd exhibited a synergistic effect on lysozyme (LZM) activity. A total of 149, 316, 211, 197, 215, 619, 434, and 602 differentially expressed metabolites were identified, distinguishing the low-dose MPs (ML), high-dose MPs (MH), low-dose Cd (LCd), low-dose MPs and low-dose Cd (MLLCd), high-dose MPs and low-dose Cd (MHLCd), high-dose Cd (HCd), low-dose MPs and high-dose Cd (MLHCd), high-dose MPs and high-dose Cd (MHHCd) groups, respectively. Metabolomic analyses revealed disruptions in lipid metabolism, nervous system function, signal transduction, and transport and catabolism pathways following exposure to PS-MPs, Cd, and MPs-Cd. Correlation analyses among key differentially expressed metabolites (DEMs) underscored the interregulation among these metabolic pathways. These results offer new perspectives on the distinct and synergistic toxicological impacts of microplastics and cadmium on aquatic species, highlighting the complex interplay between environmental contaminants and their effects on marine life.

Revitalizing polycystic ovary syndrome: The therapeutic impact of low-dose ∆ tetrahydrocannabinol-9 through reduction of oxidative stress and modulation of macrophage polarization.

Objectives: Polycystic ovary syndrome (PCOS) is a complex metabolic and endocrine disorder associated with chronic inflammation. However, the effect of ∆ tetrahydrocannabinol-9 (THC) on PCOS has not been evaluated. Therefore, this study aimed to investigate the immunomodulatory effects of THC in an animal model of PCOS. Materials and Methods: Twenty female Sprague-Dawley rats, aged 4 weeks, were divided into four groups. The control group received a normal diet, the sham group received a vehicle (carboxymethyl cellulose), the PCOS group received a high-fat diet (HFD) for 16 weeks followed by letrozole for 4 weeks, and the THC group received an HFD for 16 weeks followed by letrozole+THC (0.02 mg/kg) for 4 weeks. Results: The PCOS animals exhibited significantly higher levels of testosterone, insulin, triglycerides, and total cholesterol, along with elevated inflammatory and oxidative stress markers compared to the control group. Flow cytometry and real-time PCR analysis revealed an increase in M1 macrophage markers and a decrease in M2 macrophage markers compared to the control group. However, the administration of a low dose of THC mitigated these disturbances. Conclusion: Low-dose THC improved inflammatory responses and shifted the balance of M1/M2 macrophage markers towards M2 macrophages in the animal model of PCOS.

Polyvinyl chloride and polybutylene adipate microplastics affect peanut and rhizobium symbiosis by interfering with multiple metabolic pathways.

Microplastics (MPs), widely presented in cultivated soil, have caused serious stresses on crop growth. However, the mechanism by which MPs affect legumes and rhizobia symbiosis is still unclear. Here, peanut seedlings were inoculated with Bradyrhizobium zhanjiangense CCBAU 51778 and were grown in vermiculite with 3 %/5 % (w/w) addition of PVC (polyvinyl chloride)-MPs/PBAT (polybutylene adipate)-MPs. PVC-MPs and PBAT-MPs separately decreased nodule number by 33-100 % and 2.62-80.91 %. Transcriptome analysis showed that PVC-MPs affected more DEGs (differentially expressed genes) than PBAT-MPs, indicating PVC-MPs were more devastating for the symbiosis than PBAT-MPs. Functional annotation revealed that PVC-MPs and PBAT-MPs enriched DEGs related to biosynthesis pathways such as flavonoid, isoflavonoid, and phenylpropanoid, in peanut. And when the dose increased from 3 % to 5 %, PVC-MPs mainly enriched the pathways of starch and sucrose metabolism, alanine, aspartate and glutamate metabolism, diterpenoid biosynthesis, etc.; PBAT-MPs enriched cysteine and methionine metabolism, photosynthesis, MAPK signaling, and other pathways. These significantly enriched pathways functioned in reducing nodule number and promoting peanut tolerance to MPs stresses. This study reveals the effect of PVC-MPs and PBAT-MPs on peanut and rhizobium symbiosis, and provides new perspectives for legume production and environmental safety.

Interaction between ABA and NO in plants under abiotic stresses and its regulatory mechanisms.

Abscisic acid (ABA) and nitric oxide (NO), as unique signaling molecules, are involved in plant growth, developmental processes, and abiotic stresses. However, the interaction between ABA and NO under abiotic stresses has little been worked out at present. Therefore, this paper reviews the mechanisms of crosstalk between ABA and NO in the regulation of plants in response to environmental stresses. Firstly, ABA-NO interaction can alleviate the changes of plant morphological indexes damaged by abiotic stresses, for instance, root length, leaf area, and fresh weight. Secondly, regulatory mechanisms of interaction between ABA and NO are also summarized, such as reactive oxygen species (ROS), antioxidant enzymes, proline, flavonoids, polyamines (PAs), ascorbate-glutathione cycle, water balance, photosynthetic, stomatal movement, and post-translational modifications. Meanwhile, the relationships between ABA and NO are established. ABA regulates NO through ROS at the physiological level during the regulatory processes. At the molecular level, NO counteracts ABA through mediating post-translational modifications. Moreover, we also discuss key genes related to the antioxidant enzymes, PAs biosynthesis, ABA receptor, NO biosynthesis, and flavonoid biosynthesis that are regulated by the interaction between ABA and NO under environmental stresses. This review will provide new guiding directions for the mechanism of the crosstalk between ABA and NO to alleviate abiotic stresses.

Genome-wide identification, molecular evolution and expression analysis of the B-box gene family in mung bean (Vigna radiata L.).

BACKGROUND: Mung bean (Vigna radiata L.) is an important warm-season grain legume. Adaptation to extreme environmental conditions, supported by evolution, makes mung bean a rich gene pool for stress tolerance traits. The exploration of resistance genes will provide important genetic resources and a theoretical basis for strengthening mung bean breeding. B-box (BBX) proteins play a major role in developmental processes and stress responses. However, the identification and analysis of the mung bean BBX gene family are still lacking. RESULTS: In this study, 23 VrBBX genes were identified through comprehensive bioinformatics analysis and named based on their physical locations on chromosomes. All the VrBBXs were divided into five groups based on their phylogenetic relationships, the number of B-box they contained and whether there was an additional CONSTANS, CO-like and TOC1 (CCT) domain. Homology and collinearity analysis indicated that the BBX genes in mung bean and other species had undergone a relatively conservative evolution. Gene duplication analysis showed that only chromosomal segmental duplication contributed to the expansion of VrBBX genes and that most of the duplicated gene pairs experienced purifying selection pressure during evolution. Gene structure and motif analysis revealed that VrBBX genes clustered in the same group shared similar structural characteristics. An analysis of cis-acting elements indicated that elements related to stress and hormone responses were prevalent in the promoters of most VrBBXs. The RNA-seq data analysis and qRT-PCR of nine VrBBX genes demonstrated that VrBBX genes may play a role in response to environmental stress. Moreover, VrBBX5, VrBBX10 and VrBBX12 are important candidate genes for plant stress response. CONCLUSIONS: In this study, we systematically analyzed the genomic characteristics and expression patterns of the BBX gene family under ABA, PEG and NaCl treatments. The results will help us better understand the complexity of the BBX gene family and provide valuable information for future functional characteristics of specific genes in this family.

The Formation of the Strength of Castings including Stress and Strain Analysis.

This article presents some views on the subject of self- or residual stresses, trying to clarify some erroneously seemingly ingrained formulations in the introduction, which are widely used in castings and their classification (thermal, shrinkage, and phase stresses). For example, the location of their occurrence is often not specified, nor in which cross sections (volumes) they balance. In thin bars there are uniaxial stresses and in thin plates, stresses in two orthogonal directions are considered, while in castings, which are always three-dimensional objects, stresses in all planes should be considered. Meanwhile, to make matters worse, the complexity of calculations and possible experiments is rapidly increasing from the 1-axis to the 3-axis condition. A detailed analysis is made of how tensile and compressive stresses are calculated as a function of casting wall thickness, taking into account heat flow between walls of different thicknesses. The article presents selected methods of stress and strain testing, with particular emphasis on elasto-optical testing.

Simulation of Mechanical Stresses in BaTiO3 Multilayer Ceramic Capacitors during Desoldering in the Rework of Electronic Assemblies Using a Framework of Computational Fluid Dynamics and Thermomechanical Models.

Multilayer ceramic capacitors (MLCCs) are critical components when thermal processes such as reflow desoldering are used during rework of electronic assemblies. The capacitor's ferroelectric BaTiO3 body is very brittle. Therefore, thermomechanical stresses can cause crack formation and create conductive paths that may short the capacitor. In order to assess the thermally induced mechanical stresses onto an MLCC during reflow desoldering, simulations were carried out, which make use of a framework of computational fluid dynamics and thermomechanical models within the ANSYS software package. In the first step, CFD simulations were conducted to calculate the transient temperature field in the surrounding of the MLCC component, which was then used as an input for FEM simulations to compute the arising mechanical stresses inside the MLCC. The results of the simulations show that the major contribution to mechanical stresses within the MLCC component comes from the mismatch in thermal expansion between the printed circuit board and the MLCC. The temperature gradients along the MLCC component are rather small and account only for moderate internal stresses within the brittle BaTiO3 body.

Functionally graded bi-material interface for Porcelain Veneered Zirconia dental crowns: A study using viscoelastic finite element analysis.

OBJECTIVES: During the manufacturing of Porcelain Veneered Zirconia (PVZ) dental crowns, the veneer-core system undergoes high-temperature firing cycles and gets fused together which is then, under a controlled setting, cooled down to room temperature. During this cooling process, the mismatch in thermal properties between zirconia and porcelain leads to the development of transient and residual thermal stresses within the crown. These thermal stresses are inherent to the PVZ dental crown systems and render the crown structure weak, acting as a precursor to veneer chipping, fracture, and delamination. In this study, the introduction of an intermediate functionally graded material (FGM) layer at the bi-material interface is investigated as a potentially viable alternative for providing a smoother transition of properties between zirconia and porcelain in a PVZ crown system. METHODS: Anatomically correct 3D crown models were developed for this study, with and without the FGM layer modeled at the bi-material interface. A viscoelastic finite element model was developed and validated for an anatomically correct bilayer PVZ crown system which was then used for predicting residual and transient stresses in the bilayer PVZ crown. Subsequently, the viscoelastic finite element model was further extended for the analysis of graded sublayers within the FGM layer, and this extended model was used for predicting the residual and transient stresses in the functionally graded PVZ crown, with an FGM layer at the bi-material interface. RESULTS: The study showed that the introduction of an FGM layer at the bi-material interface has the potential to reduce the effects from transient and residual stresses within the PVZ crown system relative to a bilayer PVZ crown structure. Furthermore, the study revealed that the FGM layer causes stress redistribution to alleviate the stress concentration at the interfacial surface between porcelain and zirconia which can potentially enhance the durability of the PVZ crowns towards interfacial debonding or fracture. SIGNIFICANCE: Thus, the use of an FGM layer at the bi-material interface shows a good prospect for enhancing the longevity of the PVZ dental crown restorations by alleviating the abrupt thermal property difference and relaxing thermal stresses.